一般用 TiCN スパイラルタップ Symbol:SFT-TiCN TiCN Coated Spiral Fluted Tap TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistan
|
|
- とらふみ いせき
- 5 years ago
- Views:
Transcription
1 スパイラルタップ シリーズ Spiral Fluted Tap Series 一般用スパイラルタップ ( ネック付きタイプ ) Symbol:SFT / SFT-OX Spiral Fluted Tap For General Application (Neck Type) 1. 止まり穴用 1. For Blind Holes. 2. 切りくずが コイルのようにカールして排出される被 2. Materials where chips come out continuously in 削材に適します coil shape. 食付き長さ : 2.5 山 / 溝形状 : 35 右スパイラル / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length : 2.5pitches / Type of flute : 35 Right spiral flute. / Materials : HSSE. / Surface : OX or Bright). ステンレス用スパイラルタップ Symbol:SFT-SUS Spiral Fluted Tap for Stainless Steels 特に ステンレス鋼 耐熱鋼 ニッケルクロムマンガン鋼などに適します 炭素鋼や合金鋼にも効果があります (Suitable for tapping blind holes in materials such as Stainless Steels, Heat Resistant Steels and Nickel-Chrome-Manganese Steels. Also, it is suitable for Carbon Steels, Alloy Steels and equivalent materials.) 食付き長さ : 2.5 山 / 溝形状 : 45 右スパイラル / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 45 Right spiral flute. / Materials : HSSE. / Surface : OX.) アルミ用スパイラルタップ Symbol:SFT-Al Spiral Fluted Tap for Aluminium アルミニウムとその合金 及びアルミダイカストに適します 表面処理として 摩擦係数が非常に小さく 対溶着性に効果がある硬質クロムメッキをしています (Suitable for tapping blind holes in Aluminium, Aluminium Alloys and Aluminium diecastings. It has the plated hard chromium which has a very good welding resistance, on the surface.) 食付き長さ : 2.5 山 / 溝形状 : 35 右スパイラル / 材質 :HSSE/ 表面処理 : 硬質クロム (Chamfer length: 2.5pitches./ Type of flute: 35 Right spiral flute./ Materials: HSSE. / Surface: Hard Chromium.) 深穴用スパイラルタップ Symbol:DH-SFT-OX Spiral Fluted Tap for Deep Holes 止まり穴のネジ立て長さが通常よりも長く 切りくず等によりタップが損傷しやすい場合に使用します また 雌ネジのかじりが発生しやすい場合にも効果があります (Suitable for tapping blind holes where damage is cause by chip packing as well as in case where internal thread bites work material without difficulty.) 食付き長さ : 2.5 山 / 溝形状 : 45 右スパイラル / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 45 Right spiral flute. / Materials : HSSE. / Surface : OX.) 一般用 TiN スパイラルタップ Symbol:SFT-TiN TiN Coated Spiral Fluted Tap TiN コーティングの効果により 対磨耗性 反溶着性に優れ 低 - 中炭素鋼 ステンレス鋼 アルミ鍛造品の加工に適します (TiN coating has a good welding resistance and good wear resistance. It is suitable for carbon steels, stainless steels and aluminium forgini.) 食付き長さ : 2.5 山 / 溝形状 :35 右スパイラル / 材質 :HSSE/ 表面処理 :TiNコーティング (Chamfer length : 2.5pitches / Type of flute : 35 Right spiral flute. / Materials : HSSE. / Surface : TiN coating.) HAYASAKA Mfg. Co., Ltd.
2 一般用 TiCN スパイラルタップ Symbol:SFT-TiCN TiCN Coated Spiral Fluted Tap TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistance and excellent wear resistance. It is suitable for tapping blind holes in soft materials and hard materials.) 食付き長さ : 2.5 山 / 溝形状 :35 右スパイラル / 材質 :HSSE/ 表面処理 :TiCNコーティング (Chamfer length : 2.5pitches / Type of flute : 35 Right spiral flute. / Materials : HSSE. / Surface : TiCN coating.) 一般用スパイラルタップ (J 形タイプ ) Symbol:J-SFT / J-SFT-OX Spiral Fluted Tap For General Application (JIS Type) N-SFT と同等のタップですが 従来の JIS 規格に従った形状になっています 食付き長さ : 2.5 山 / 溝形状 : 35 右スパイラル / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length : 2.5pitches / Type of flute : 35 Right spiral flute. / Materials : HSSE. / Surface : OX or Bright). 一般用ロングシャンクスパイラルタップ Symbol:LTSFT /LTSFT-OX Lomg Shank Spiral Fluted Tap for General Application 一般のタップでは長さが不足するような場合に使用します (Suitable for occasions where a Taps of insufficient length.) 食付き長さ : 2.5 山 / 溝形状 : 35 右スパイラル / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length : 2.5pitches / Type of flute : 35 Right spiral flute. / Materials : HSSE. / Surface : OX or Bright) HAYASAKA Mfg. Co., Ltd.
3 ポイントタップ シリーズ Spiral Pointed Tap Series 一般用ポイントタップ ( ネック付きタイプ ) Symbol:POT /POT-OX Spiral Pointed Tap For General Application (Neck Type) 1. 貫通穴用 1. For Through Holes. 2. 切削トルクが低く 切りくずを前方に排出します 2. Pushes chips forward with low cutting torque.) 3. 切りくずが コイルのようにカールして排出される被 3. Materials where chips come out continuously in 削材に適します coil shape. 食付き長さ : 5 山 / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length : 5pitches / Materials : HSSE. / Surface : OX or Bright). ステンレス用ポイントタップ Symbol:POT-SUS Spiral Pointed Tap for Stainless Steels 特に ステンレス鋼 耐熱鋼 ニッケルクロムマンガン鋼などに適します 炭素鋼や合金鋼にも効果があります (Suitable for tapping through holes in materials such as Stainless Steels, Heat Resistant Steels and Nickel-Chrome- Manganese Steels. Also, it is suitable for Carbon Steels, Alloy Steels and equivalent materials.) 食付き長さ : 5 山 / 材質 :HSSE/ 表面処理 : ホモ処理 (OX) (Chamfer length : 5pitches / Materials : HSSE. / Surface : OX.) アルミ用ポイントタップ Symbol:POT-Al Spiral Pointed Tap for Aluminium アルミニウムとその合金 及びアルミダイカストに適します 表面処理として 摩擦係数が非常に小さく 対溶着性に効果がある硬質クロムメッキをしています (Suitable for tapping through holes in Aluminium, Aluminium Alloys and Aluminium diecastings. It has the plated hard chromium which has a very good welding resistance, on the surface.) 食付き長さ : 5 山 / 材質 :HSSE/ 表面処理 : 硬質クロム (Chamfer length : 5pitches / Materials : HSSE. / Surface : Hard Chromium.) 一般用 TiN ポイントタップ Symbol:POT-TiN TiN Coated Spiral Pointed Tap TiN コーティングの効果により 対磨耗性 反溶着性に優れ 低 - 中炭素鋼 ステンレス鋼 アルミ鍛造品の加工に適します (TiN coating has a good welding resistance and good wear resistance. It is suitable for carbon steels, stainless steels and aluminium forgini.) 食付き長さ : 5 山 / 材質 :HSSE/ 表面処理 :TiN コーティング (Chamfer length : 5pitches / Materials : HSSE. / Surface : TiN coating.) 一般用 TiCN ポイントタップ Symbol:POT-TiCN TiCN Spiral Pointed Tap for General Application TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistance and excellent wear resistance. It is suitable for tapping through holes in soft materials and hard materials.) 食付き長さ : 5 山 / 材質 :HSSE/ 表面処理 :TiCN コーティング (Chamfer length : 5pitches. / Materials : HSSE. / Surface : TiCN coating.) HAYASAKA Mfg. Co., Ltd.
4 一般用ポイントタップ (JISタイプ) Symbol:J-POT/ J-POT-OX Spiral Pointed Tap For General Application (JIS Type) N-POT と同等のタップですが 従来の JIS 規格に従った形状になっています 食付き長さ : 5 山 / 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length :.5pitches. / Materials : HSSE. / Surface : OX or Bright). 一般用ロングシャンクポイントタップ Symbol:LTPOT/LTPOT-OX Long Shank Spiral Pointed Tap for General Application 食付き長さ : 5 山 / 表面処理 : ホモ処理 (OX) または無処理 (Chamfer length :.5pitches. / Materials : HSSE. / Surface : OX or Bright) HAYASAKA Mfg. Co., Ltd.
5 ハンドタップ シリーズ Hand Tap Series 一般用ハンドタップ (HSS) Symbol:HT Hand Tap For General Application 一般的なタップであらゆる方面で使用されています (Standard taps that can be used in for a variety of applications.) 食付き長さ : 9 山 ( 先 ) 5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :HSSE (Chamfer length : Taper (#1) 9pitches Plug (#2) 5pitches Bottoming (#3) 1.5pitches / Materials : HSSE.) ステンレス用ハンドタップ Symbol:HT-SUS Hand Tap For Stainless Steel 特に ステンレス鋼 耐熱鋼 ニッケルクロムマンガン鋼などに適します 炭素鋼や合金鋼にも効果があります (Suitable for Stainless Steels, Heat Resistant Steels, Nickel-Chrome-Manganese Steels, Carbon Steels, Alloy Steels and equivalent materials.) 食付き長さ :5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :HSSE/ 表面処理 : ホモ処理 (OX) (Chamfer length : Plug 5pitches Bottoming 1.5pitches / Materials : HSSE. / Surface : OX.) TiN ハンドタップ Symbol:HT-TiN TiN Coated Hand Tap TiN コーティングの効果により 対磨耗性 反溶着性に優れ 低 - 中炭素鋼 ステンレス鋼 アルミ鍛造品の加工に適します (TiN coating has a good welding resistance and good wear resistance. It is suitable for carbon steels, stainless steels and aluminium forgini.) 食付き長さ : 9 山 ( 先 ) 5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :HSSE/ 表面処理 :TiN コーティング (Chamfer length :Taper 9pitches Plug 5pitches Bottoming 1.5pitches /Materials :HSSE /Surface :TiN coating.) TiCN ハンドタップ Symbol:HT-TiCN TiCN Coated Hand Tap TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistance and excellent wear resistance. It is suitable for tapping through holes in soft materials and hard materials.) 食付き長さ : 9 山 ( 先 ) 5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :HSSE/ 表面処理 :TiCN コーティング (Chamfer length :Taper 9pitches Plug 5pitches Bottoming 1.5pitches /Materials :HSSE /Surface :TiCN coating.) 一般用ハンドタップ (SKS2) Symbol:HT Hand Tap For General Application 一般的なタップであらゆる方面で使用されています (Standard taps that can be used in for a variety of applications.) 食付き長さ : 9 山 ( 先 ) 5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :SKS2 (Chamfer length : Taper (#1) 9pitches Plug (#2) 5pitches Bottoming (#3) 1.5pitches / Materials : SKS2.) 一般用ロングシャンクハンドタップ Symbol:LT Long Shank Hand Tap For General Application 食付き長さ : 9 山 ( 先 ) 5 山 ( 中 ) 1.5 山 ( 上げ )/ 材質 :HSSE (Chamfer length : Taper (#1) 9pitches Plug (#2) 5pitches Bottoming (#3) 1.5pitches / Materials : HSSE.) HAYASAKA Mfg. Co., Ltd.
6 管用タップシリーズ Pipe Thread Tap 管用テーパタップについて Taper Pipe Thread Tap (PT/Rc) 管用テーパ雌ねじ加工に使用します パイプの接続などのようにねじが長い Used in order to process taper pipe internal thread. There is standard thread 場合は 標準タイプを使用し エルボやチーズのようにねじが短い場合は 短 length type and short thread length type. ねじタイプを使用します 雌ねじの種類 : 耐密用テーパ雌ねじ 記号 :PT( 新記号 :Rc) 管用平行タップについて (PS/Rp) (PF/G) 1982 年の ISO 導入により JIS 規格が改正され 記号が変更されましたが ねじ部精度については変更されていません 管用テーパ雌ねじの平行雌ねじ および管用平行雌ねじ加工に使用します 雌ねじの種類 : 耐密用平行雌ねじ 記号 :PS( 新記号 :Rp) 1982 年の ISO 導入により JIS 規格が改正され 記号が変更されましたが ねじ部精度については変更されていません 管用テーパ雌ねじの平行雌ねじ および管用平行雌ねじ加工に使用します Type of thread: Taper pipr threads for pressure-tight joints. Symbol: PT (New symbol: Rc) In 1982, the JIS Pipe Standard was revised according to ISO Standard and the symbol was changed. But the limits was not changed. Parallel Pipe Thread Tap (PS/Rp & PF/G) Used for tapping parallel pipe internal thread. Type of thread: Parallel pipr threads for pressure-tight joints. Symbol: PS (New symbol: Rp) In 1982, the JIS Pipe Standard was revised according to ISO Standard and the symbol was changed. But the limits was not changed. Used for tapping parallel pipe internal thread. 雌ねじの種類 : 機械的結合用平行雌ねじ 記号 :PF( 新記号 :G) Symbol: PF (New symbol: G) 1982 年の ISO 導入により JIS 規格が改正され 記号が変更されましたが ねじ部精度については変更されていません Type of thread: Parallel pipr threads for mechanical joints. In 1982, the JIS Pipe Standard was revised according to ISO Standard and the symbol was changed. But the limits was not changed HAYASAKA Mfg. Co., Ltd.
7 管用テーパタップ (PT) Taper Pipe Thread Tap (PT/Rc) 一般用管用テーパタップ Symbol:PT Taper Pipe Tap For General Application 食付き長さ : 2.5 山 / 溝形状 : ストレート / 材質 :HSS SKS2 (Chamfer length : 2.5pitches / Type of flute : Straight. / Materials : HSS., SKS2.) 短ねじの記号 (Symbol of short thread type) : PTT-S 一般用管用テーパスパイラルタップ Symbol:SFTPT/SFTPT-OX Taper Pipe Spiral Fluted Tap For General Application 食付き長さ : 2.5 山 / 溝形状 :35 右スパイラル / 材質 :HSS / 表面処理 : 無処理またはホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 35 right spiral flute. / Materials : HSS/ Surface: Bright or OX) 短ねじの記号 (Symbol of short thread type) : SFPTT-S / SFPTT-S-OX 一般用管用テーパタップインターラップ Symbol:INT Taper Pipe Tap with Interruped Thread ステンレス鋼や耐熱合金のように溶着が発生しやすい難削材に適します (It is suitable for Stainless Steels and Heart Resistant Alloys.) 食付き長さ : 2.5 山 / 溝形状 :8 左スパイラル / 材質 :HSS/ 表面処理 : ホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 8 Left spiral flute. / Materials : HSS/ Surface: OX) 短ねじの記号 (Symbol of short thread type) : INT-S 一般用ロングシャンク管用テーパタップ Symbol:LTPT Long Shank Taper Pipe Tap For General Application 一般のタップでは長さが不足するような場合に使用します 食付き長さ : 2.5 山 / 溝形状 : ストレート / 材質 :HSS (Chamfer length : 2.5pitches / Type of flute : Straight. / Materials : HSS.) (Suitable for occasions where a Taps of insufficient length.) HAYASAKA Mfg. Co., Ltd.
8 管用平行タップ (PS/PF) Parallel Pipe Thread Tap (PS/Rp & PF/G) 一般用管用平行タップ Symbol:PP Parallel Pipe Tap For General Application 食付き長さ : 4 山 / 溝形状 : ストレート / 材質 :HSS SKS2 (Chamfer length : 4pitches / Type of flute : Straight. / Materials : HSS, SKS2.) 一般用管用平行スパイラルタップ Symbol:SFTPP/SFTPP-OX Parallel Pipe Spiral Fluted Tap For General Application 食付き長さ : 4 山 / 溝形状 :35 右スパイラル / 材質 :HSSE HSS / 表面処理 : 無処理またはホモ処理 (OX) (Chamfer length : 4pitches / Type of flute : 35 right spiral flute. / Materials : HSS/ Surface: Bright or OX) 一般用ロングシャンク管用平行タップ Symbol:LTPP Long Shank Parallel Pipe Tap For General Application 一般のタップでは長さが不足するような場合に使用します (Suitable for occasions where a Taps of insufficient length.) 食付き長さ :4 山 / 溝形状 : ストレート / 材質 :HSS (Chamfer length : 4pitches / Type of flute : Straight. / Materials : HSS.) 米式管用テーパタップ American Taper Pipe Thread Tap (NPT) 米式管用テーパタップ Symbol:NPT American Taper Pipe Tap For General Application 食付き長さ : 2.5 山 / 溝形状 : ストレート / 材質 :HSS SKS2 (Chamfer length : 2.5pitches / Type of flute : Straight. / Materials : HSS, SKS2.) 米式管用テーパスパイラルタップ Symbol:SFTNPT/SFTNPT-OX American Taper Pipe Spiral Fluted Tap For General Application 食付き長さ : 2.5 山 / 溝形状 :35 右スパイラル / 材質 :HSS/ 表面処理 : 無処理またはホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 35 right spiral flute. / Materials : HSS/ Surface: Bright or OX) 米式管用平行タップ American Parallel Pipe Thread Tap (NPS) 米式管用平行タップ Symbol:NPS American Parallel Pipe Tap For General Application 食付き長さ : 4 山 / 溝形状 : ストレート / 材質 :HSS SKS2 (Chamfer length : 4pitches / Type of flute : Straight. / Materials : HSS, SKS2.) 米式管用平行スパイラルタップ Symbol:SFTNPS/SFTNPS-OX American Parallel Pipe Spiral Fluted Tap For General Application 食付き長さ : 2.5 山 / 溝形状 :35 右スパイラル / 材質 :HSS/ 表面処理 : 無処理またはホモ処理 (OX) (Chamfer length : 2.5pitches / Type of flute : 35 right spiral flute. / Materials : HSS/ Surface: Bright or OX) HAYASAKA Mfg. Co., Ltd.
OSG Product Catalogue VOL-2.pdf
TAPS SPIR POINTED TAP SERIES GENER APPLICATION EX-POT Suitable for through hole tapping of carbon steels, alloy steels and nonferrous metals whose chips are produced in continuous coil form. These taps
More informationねじ切り丸ダイスROUND DIES 819 本カタログに掲載されている製品につきましては 在庫表記を記載しておりますが 新材種 新製品などの開発にともない改廃される場合もございます 予告なく仕様 形状 表内の値等が変更となる場合がございます The inventory status is indi
切り丸ダイス 819 本カタログに掲載されている製品につきましては 表記を記載しておりますが 新材種 新製品などの開発にともない改廃される場合もございます 予告なく仕様 形状 表内の値等が変更となる場合がございます The inventory status is indicated for respective products on this catalogue. However, the products
More informationタップ総合
1 2 3 4 N NEW タップシリーズ N Tap series ねじ加工に適した高バナジウムハイスの使用により 汎用タップながらも長寿命 高剛性設計で安定ねじ加工を実現 Nスパイラルタップ NSP By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads
More informationFeatures Features FeaturesThread milling cutters 1
Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons
More informationThread Milling Cutter Series
Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials
More informationVol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM
More informationメタルバンドソー
Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4
More informationTornado Series selection SW TiCN HSS Co FAX VL PM
Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products
More informationNEW NACHI の技術を結集した 新しいジャンルの革新タップ誕生 材料から熱処理 研削技術 表面処理まで NACHI のもつ歯切工具やブローチのシーズ技術を応用 加工メカニズムと摩耗解析による最適設計で 寿命バラツキの少ない安定加工を実現 低速 ~ 中速領域で高性能を発揮し 無処理タップの 2~
217 Vol.3 NEW NACHI の技術を結集した 新しいジャンルの革新タップ誕生 材料から熱処理 研削技術 表面処理まで NACHI のもつ歯切工具やブローチのシーズ技術を応用 加工メカニズムと摩耗解析による最適設計で 寿命バラツキの少ない安定加工を実現 低速 ~ 中速領域で高性能を発揮し 無処理タップの 2~3 倍の長寿命 コーティングタップをも凌駕する長寿命 New style of innovative
More information高能率 多機能タップ A-TAP Vol.11 Highly Efficient Multi-Purpose Tap Series
高能率 多機能タップ A-TAP Vol.11 Highly Efficient Multi-Purpose Tap Series INDEX 目次 A-TAP is A-TAP とは 特長 Features 3 切削条件基準表 Cutting Conditions 5 加工データ Cutting Data 7 止り穴用スパイラルタップ for Blind Holes Spiral Fluted Tap
More informationOSG Product Catalogue VOL-2.pdf
IPG CARBIDE END MILLS & DRILLS S SERIES 2 FLUTE SHORT SMG-EDS 2 FLUTE SHORT WITH PREMIER COATING TA-SMG-EDS S S 1 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 PRe
More information高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMa
高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMaster INDEX A-TAP is A-TAP Features 3 Cutting Conditions
More informationタップRECOMMENDED DRILL HOLE SIZE ねRECOMMENDED DRILL HOLE SIZE ねじ下穴径表穴径表インサートねじ用は P.736 を参照下さい For screw thread insert : Please refer to P.736 メートルねじ Met
ねRECOMMENDED DRILL HOLE SIZE ねじ下穴径表穴径表インサートねじ用は P.736 を参照下さい For screw thread insert : Please refer to P.736 メートルねじ Metric screw threads JIS B 0209-1: 2007 JIS B 8031-2007 M 1 0.25 0.75 0.73 0.78 0.77
More information高能率 多機能タップ A-TAP Vol.9 Highly Efficient Multi-Purpose Tap Series
高能率 多機能タップ A-TAP Vol.9 Highly Efficient Multi-Purpose Tap Series INDEX A-TAP is A-TAP Features 3 Cutting Conditions 5 Cutting Data 7 A-SFT for Blind Holes Metric Screw Thread A-SFT 15 (1.5P1P) Short Chamfer
More information429
WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B
More informationアクアEXオイルホールロング(CC2015).indd
High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge
More informationThread Mill Series
Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank
More informationHigh performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a
SG Drill Series High performance PM-HSS Drills High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning and Stable
More information01.eps
444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning
More informationSGドリルシリーズ_CC2015.indd
SG Drill Series High performance PMHSS Drills High performance PMHSS Drills Powder HSS with SG Coating and the tool life is 2 times of conventional coated drills. Extremely precise positioning and Stable
More information03-01 Senyouki.pdf
WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06
More informationWE WESB WENB WESNB 428
KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always
More informationF3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1
OSG-WALTER Vol. 5 F3000 Series F3010 P3F90R NEW WAK25 F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 2 INSERT SIZE & APPLICABLE CUTER INSERTS APPLICATION CHART Inserts Application Chart Product
More informationコード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted
More informationPRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM
PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach
More informationKOMET KUB K2® 小径対応ヘッド交換式ドリル
KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also
More informationNEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR
NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong
More information1 2 3
INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL
More informationNACHIの提案 めねじ加工は 面取り 下穴加工 ねじ立てなど複数の工程が必要です NACHIは ドリルとタップをセットにした工程スルーで最適化することをご提案いたします NACHI recommends threaded holes cutting tools Cutting for intern
NACHIの提案 めねじ加工は 面取り 下穴加工 ねじ立てなど複数の工程が必要です NACHIは ドリルとタップをセットにした工程スルーで最適化することをご提案いたします NACHI recommends threaded holes cutting tools Cutting for internal thread needs many processes, Chamfering, Drilling
More information429
WE WESB WENB WESNB 428 429 WENB, WENRB Quick Change Tap Adapter 0210 11000 WEN0B M3 M8M10 U1/4 U5/16U3/8 0 8 22 13 13 15 4 19.5 28 0.05 10,170 0210 11001 WEN1B M3 M12M15 U1/4 U7/16U9/16 Pipe(PT,PS,PF)1/8
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F
01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries
More informationWXLコーティング新登場!! 3枚刃超硬面取りカッタ arbide 3-flute hamfering utter WXL oated Now Available arbide hamfering utter 独自の3刃仕様 arbide Series with TiAIN oating W-HST
A wide variety of products is available so you can choose the ideal tools for your applications! WXL WXL oating Now Available!! LS-HST-P HST-P V-US WLS-HST-P W-HST-P FX-MG-S A line-up expanded! No more
More informationFig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T
Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.
More informationXパフォーマー転造タップ XPF Vol.11 新価格体系 New Price 2018 年 6 月 X Performer Forming Tap
Xパフォマ転造タップ XPF Vol. 新価格体系 New Price 208 年 6 月 X Performer Forming Tap X パフォマ (X P F ) 転造タップシリズ X Performer Forming Tap Series (XPF) 転造タップは 材料を塑性変形することでねじ山を形成し 切りくずが発生しません 切りくずゼロの安定した加工を求めるなら 是非転造タップをお試し下さい
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro
Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard
More informationアクアドリルEX改定.indd
AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD AQDEXOHD AQDEXOHD AQDEXZ Delivering high-performance consistently in a wide range from moderate-low to high speeds AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD
More informationQuality cutting tool solutions for all of your die/mold machining needs! Guide for Icons Materials Surface Treatment Tolerance for Drill Diameter Tung
ドリル & タップ 高硬度鋼 金型用シリーズ Drill & Tap Series for High Hardness Steels and Dies Vol.2 新価格体系 New Price 2018 年 6 月 Quality cutting tool solutions for all of your die/mold machining needs! Guide for Icons Materials
More informationLHHBAA+ArialMT Adobe Identity 0
13ヲ ヲオヲァヲャヲ ヲアヲゥヲイ ヲウヲァヲイ ヲェヲエヲ ヲ ヲアヲュヲァヲイヲ ヲクヲイ (ヲウヲ ヲエヲカヲッヲイ 6メ2ヲ ヲエヲウヲ ヲアヲッ) 30965 2009-12-23 ICS: 93.040 1 71 71 71 7 1 71 7 1501-03-05-02-01:2009 1 71 71 71 71 71 71 71 7 TEXNIKH 1 71 71 71 71 71
More information第122号(A4、E)(4C)/3 宇野ほか
trans Development of high performance heat resistant transparent polyimides based on trans-,,, -cyclopentanetetracarboxylic dianhydride Takaaki Uno Takashi Okada Igor Rozhanskii Toshimitsu Kikuchi Kohei
More informationDirect Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m
RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed
More information年次大会原稿最終.PDF
Structural Analysis of Coating Layer Containing Plastic Pigments Yoko Saito, Hideki Touda, Junji Kasai ZEON Corporation Hitomi Hamada, Toshiharu Enomae, Fumihiko Onabe The University of Tokyo Recently,
More information03-01 Senyouki.pdf
Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder
More informationConnectors for Automobiles 62 SEALED SERIES Japanese English
Connectors for Automobiles 62 SEALED SERIES Japanese English 62 P-01 62 P-02 ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5 20.8 2.1 M(1400-0434) F(1400-0432) ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5
More informationALシリーズ.indd
アルミ専用エンドミル 倍刃長タイプ AD- AD- NS の A シリーズは あらゆる条件で安定した高能率加工を実現 コストパフォーマンスに優れた高剛性 倍刃長タイプ NS の A シリーズは あらゆる条件で安定した高能率加工を実現 幅広い領域で安定した加工面精度が得られ 高速加工でもビビリを抑制 A-series realized a stable and high efficient machining.
More informationBT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted by
More information06mokuji.indb
: JIS A 9501 2006 Basics 基 本 Standard practice for thermal insulation works 23 JIS B 0202 1999 Parallel pipe threads ISO 228-1 94 (MOD) 89 JIS B 0203 1999 Taper pipe threads ISO 7-1 94 (MOD) 96 JIS B 0253
More information2002-
Application Limits of Flux Cored Arc Welding to Chemical Processing Plants Sumitomo Chemical Co., Ltd. Process & Production Technology Center Takahisa HOSHIKA Hisakazu MORI High efficiency of Flux Cored
More informationDevelopment of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake
Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake supplied to the engine, and as such are critical elements
More information渡辺(2309)_渡辺(2309)
[ 29 p. 241-247 (2011)] ** *** ** ** Development of a nickel-based filler metal containing a small amount of silicon by WATANABE Takehiko, WAKATSUKI Ken, YANAGISAWA Atsusi and SASAKI Tomohiro Authors tried
More informationAnti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i
内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining
More informationMRBTNH230
高硬度材への深彫り加工で真価を発揮する Show its higher ability by deep milling for high hard materials. 無限コーティングプレミアム ロングテーパーネック 2 枚刃ボールエンドミル MRBTNH230 MUGEN-COATING PREMIUM 2-Flute Long Taper Neck Ball End Mill 最適化したテーパーネック形状
More information橡ボーダーライン.PDF
1 ( ) ( ) 2 3 4 ( ) 5 6 7 8 9 10 11 12 13 14 ( ) 15 16 17 18 19 20 ( ) 21 22 23 24 ( ) 25 26 27 28 29 30 ( ) 31 To be or not to be 32 33 34 35 36 37 38 ( ) 39 40 41 42 43 44 45 46 47 48 ( ) 49 50 51 52
More informationLINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing
AERO End Mill High Speed Carbide End Mills for Aluminum Alloys Vol.4! New cutting data on specials! LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute,
More informationカタログ_XL_Mini-XL.indd
XLR シリーズ XLR Series コンタクト数 # of contacts 2 3 4 5 6 6 7 コンタクトアレンジメント ( ピンタイプの結合面から見た図 ) 2A 3 4 5 6 6A 7 Contact Arrangement Configuration (Engaging View Pin Insert) 定格電流 Rated Current 15A 15A 10A 7.5A 7.5A
More informationOptions(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet si
AC Fan 6mm sq. San Ace 6 28mm thick, 38mm thick General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1: Survival rate: 9% at
More informationLNG Tank-Its Structure, the Materials and Welding Techniques Yasunosuke OGAWA, Mitsuhiro SAKAMOTO, Kiyoaki TOYOMASU, Mitsuo OHYAMA, Munemitsu FUKAGAWA, and Yoshinori SAIGA Table 2. Material list for various
More informationFig. 3 Coordinate system and notation Fig. 1 The hydrodynamic force and wave measured system Fig. 2 Apparatus of model testing
The Hydrodynamic Force Acting on the Ship in a Following Sea (1 St Report) Summary by Yutaka Terao, Member Broaching phenomena are most likely to occur in a following sea to relative small and fast craft
More information2 236
28 2004 pp. 235 245 1 Received November 5, 2004 In the eighth volume of Confessiones is a famous and critical passage in which Augustine describes the process leading to his conversion. It is a long and
More informationContinuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed
Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed a series of researches on continuous cooling transformation
More information03-03 Bush Mentori.pdf
54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1
More information00_1512_SLIMLINE_BOOK.indb
PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity
More informationBT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ "R"Zero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです ターニングツールTurning Tools for SPEEDIO STシャンーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic
More informationNo488_1804
PRODUCT S No. 488 SERIES EXPANSION Spot facing drill Spot facing drill with point angle of 180 (flat face). Size range: 1-14mm dia. JCTMA 2015-018 ECO PRODUCT Flat Face Application Spot facing slope Spot
More information10生活環境研究報告.indd
It is well known that there are great differences among the flow characteristics of a non- Newtonian fluid such as gelatinized starch dispersions, depending on the analytical devices used and measurement
More informationーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys
ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool system 機能付きホルダFunction Holder プルスタッドRetention Stud シャンク規格Tool
More informationDIN Connector_p2-25.qxd
INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A
More information<8ED089EF8B D312D30914F95742E696E6464>
* 1 The problem of privacy in the news of newspapers and weekly magazines The analysis of the articles on the child serial killing incidents in Kobe Akihiko SHIMAZAKI Kenzo SHIDA Toshihiko KATANO *2 1
More informationNo473_13.indd
ニュース No.473 優れた切りくず排出性と安定長寿命を実現 Excellent Chip Evacuation and Stable and Long Tool Life スーパーマルチドリル GS 型 /HGS 型 /WGS 型 SUPER MULTIRILL GS series / HGS series / WGS series 第 13 版 2009-015 series series EX-Coating
More information継手の早見表 Excellent,Ultimate,Fine,lean & Safe Technology 信頼性の極限値 を追求したフジキンの製品ラインナップです ガスケット継手 UJR は 精密継手メーカーとして 長年の経験によって蓄積した 設計ノウハウと生産 技術を駆使して量産された優れた性能
T No.720-01-O UJR継手 自動溶接継手 UJT-M-W-S UJR UJ-M-W-S あらゆる部分にお客様からのご提案を取り入れさせていただいております 継手の早見表 Excellent,Ultimate,Fine,lean & Safe Technology 信頼性の極限値 を追求したフジキンの製品ラインナップです ガスケット継手 UJR は 精密継手メーカーとして 長年の経験によって蓄積した
More informationAerospace Solutions
Aerospace Solutions INDEX Assembly 2 Type 3 CFRP 4 CFRP/AL Stack 5 CFRP/TI Stack 6 Special Assembly s 7 Structure 8 Aluminum Parts 9 CFRP Parts 11 Titanium Parts 13 Honeycomb Parts 17 Engine 18 Drilling
More information利隆塑料
w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented
More informationA Study about the Oscillation of the Water Pistons of the Fluidyne Heat Machine ( A Study about the Oscillation of the Water Pistons of the Fluidyne Heat Machine (II) For the teaching materials of the
More informationJOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna
JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate
More information銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Coppe
銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Copper Electrode - DRB230. バリを最小限に抑えた高精度な加工を可能にするシャープな刃形状!
More information可変ピツチプロペラ船の荒天碇泊法単錨泊について
NAOSITE: Nagasaki University's Ac Title 可 変 ピツチプロペラ 船 の 荒 天 碇 泊 法 単 錨 泊 について Author(s) 阿 部, 茂 夫 Citation 長 崎 大 学 水 産 学 部 研 究 報 告, v.20, pp.70-86; 1966 Issue Date 1966-03 URL http://hdl.handle.net/10069/31513
More information商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16.
BT HDC A 高精度コレットホルダ BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHigh-Precision Collet Holder ドリル加工 リーマ加工 仕上エンドミル加工に最適 Suitable for drilling, reaming and finish endmilling. ターニングツールTurning Tools for
More informationA Feasibility Study of Direct-Mapping-Type Parallel Processing Method to Solve Linear Equations in Load Flow Calculations Hiroaki Inayoshi, Non-member
A Feasibility Study of Direct-Mapping-Type Parallel Processing Method to Solve Linear Equations in Load Flow Calculations Hiroaki Inayoshi, Non-member (University of Tsukuba), Yasuharu Ohsawa, Member (Kobe
More informationThis paper is going to take up the "Cultural history of dishes" as a part of the "Ancient pulley and the Korean people series II". In the ancient times the pulley was used to make basically dishes for
More informationcms.pdf
RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Terminal pin lick spring Ground terminal Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated
More informationsoturon.dvi
12 Exploration Method of Various Routes with Genetic Algorithm 1010369 2001 2 5 ( Genetic Algorithm: GA ) GA 2 3 Dijkstra Dijkstra i Abstract Exploration Method of Various Routes with Genetic Algorithm
More informationFMA Type3 Type4 Multibore tool system Please refer to P When AHO is used with center through coolant feeding, a designated retention stud (with
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミFMA フェイスミルアーバ JIS B4113 正面フライス用 ターニングツールTurning Tools for SPEEDIO プルスタッーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic
More informationTURNING INERT NEW RODUCT 2014 ocket Guide
TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 3 7 11 13 15 18 20 24 26 28 30 34 38 40 44 45 47 3 ocket Guide 2014 ocket Guide 2014 4
More informationKG STOCK GEARS 定価表 PRICE LIST 消費税は含まれておりません消費税は別途申し受けます 2015 年 9 月 1 日 49 号
KG STOCK GEARS 定価表 PRICE LIST 消費税は含まれておりません消費税は別途申し受けます 2015 年 9 月 1 日 49 号 * 本表の価格には消費税は含まれておりません 消費税は別途申し受けます * 本定価表の価格は全て 1 個あたりで ( 単価 ) で表示してあります * マイタギヤは一対でご使用ください * 予告なく価格を変更する場合がありますので ご了承下さい *
More informationGAUGES STOCK LIST
GUGES STOCK LIST 06 9 目次 Contents P. の測定ねじ別ゲジ選定表もご覧下さい Please see P. for Gauge Selection Chart. プラグゲジ LG 限界ゲジ Plug gauges (LG) Limit gauges (LG) プラグ Limit gauges for screw threads(lg) Plug メトル (M) ねじ Metric
More information名称未設定-1
切削工具 ニュースーパードリルセット標準形ヘッド NEW SUPER DRILL (Standard Head Type) 特徴 FEATURES P.31-34 モールステーパシャンクセット ( 標準タイプ ) MT - MAX- D MORSE TAPER SHANK SET (Standard) 1. 標準ヘッド ( E 以上のセット内容にはセンタードリル 替刃は含まれておりません ) ø L3
More informationIndex P. 2 Tool Lineup and Guide for Icons P. 3 Total Solutions for Your Thread Milling Needs Solid Type P. 5 Tool Selection Guide by Work Materials P
スレッドミルシリーズ Thread Mill Vol.14 新価格体系 New Price 2018 年 6 月 Index P. 2 Tool Lineup and Guide for Icons P. 3 Total Solutions for Your Thread Milling Needs Solid Type P. 5 Tool Selection Guide by Work Materials
More informationKG STOCK GEARS 定価表 PRICE LIST 消費税は含まれておりません消費税は別途申し受けます 2012 年 6 月 15 日 47 号
KG STOCK GEARS 定価表 PRICE LIST 消費税は含まれておりません消費税は別途申し受けます 2012 年 6 月 15 日 47 号 KG STOCK GEARS の定価について The KG - PRICE LIST. * 本表の価格には消費税は含まれておりません 消費税は別途申し受けます * 本定価表の価格は全て 1 個あたりで ( 単価 ) で表示してあります * マイタギヤは一対でご使用ください
More informationAFC_Produktkatalog_2018_JPN_2_1_DS_grau-weiße Linien.indd
PRODUCT CATALOGUE 超硬合金製造における豊富な経験と知識に基づく細部への追及 理想 イノベーション 技術 パートナーシップ 2 3 超硬合金材種一覧 AF K10 UF AF K20 CF AF K34 EF AF K40 UF AF K44 EF AF K45 EF ISO-JIS 規格 K10 化学構成コバルト (%) 6 炭化タングステン及びその他 (%) 94 ISO-JIS
More informationリーマ総合カタログ GENERAL CATALOGUE Vol エフ ピー ツール株式会社 F.P.TOOLS CO.,LTD.
リーマ総合カタログ GENERAL CATALOGUE Vol.-16 2014.11 エフ ピー ツール株式会社 F.P.TOOLS CO.,LTD. 目 次 INDEX 各種リーマの適用被削材と用途 P. 2 3 Reamers Correlation Diagram リーマ被削材別対応一覧 P. 4 5 Property Table for Selection of reamer リーマ被削材別参考切削条件
More informationSafety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------
More informationuntitled
SATO Kentaro Milk and its by-products are naturally nutritious food, and people in ancient Japan enjoyed tasting them as foods, drinks, or medicines. On the other hand, milk and its by-products were closely
More informationシリーズ No 改訂版
シリーズ No.34 08.06 改訂版 安全にお使いいただくために 加工前の注意 鋭利な切れ刃を素手で触るとけがの危険があります 切れ刃を素手で触らないで下さい 特にケースからの取り出し時や機械への装着時には 保護手袋等を使用して下さい 重量の重い工具を扱う時は 落下によるけがの危険があります 適切な運搬機具等を使用し 安全靴を着用して下さい 工具に傷 割れ等があると使用中に破損し飛び散ることがあります
More informationFundamental Study on the SOX Gas Sensor Utilizing Beta-Alumina with Sputtered Praseodymium Oxide Thin Films by Shinya YAO1*, Kenji MIYAGAWA1, Shigeru
Fundamental Study on the SOX Gas Sensor Utilizing Beta-Alumina with Sputtered Praseodymium Oxide Thin Films by Shinya YAO1*, Kenji MIYAGAWA1, Shigeru IIJIMA2 and Zensaku KOZUKA1 1. Faculty of Engineering,
More informationD規格一般資料 溶接材料規格は, Code Section Ⅱ Part C に記載されています この Section Ⅱ Part C には,SFA-5.1 から SFA-5.02 までの規格があり, それぞれ溶接材料別に規定しており, その種別を下記に示します また, この他に溶接関連として,S
資料 D1 溶接材料規格について資料 D2 A-NUMBERS 資料 D3 F-NUMBERS 資料 D4 溶接材料規格のマトリクス D規格一般資料 溶接材料規格は, Code Section Ⅱ Part C に記載されています この Section Ⅱ Part C には,SFA-5.1 から SFA-5.02 までの規格があり, それぞれ溶接材料別に規定しており, その種別を下記に示します また,
More informationNO.80 2012.9.30 3
Fukuoka Women s University NO.80 2O12.9.30 CONTENTS 2 2 3 3 4 6 7 8 8 8 9 10 11 11 11 12 NO.80 2012.9.30 3 4 Fukuoka Women s University NO.80 2012.9.30 5 My Life in Japan Widchayapon SASISAKULPON (Ing)
More informationアクアドリルシリーズ
AQUA Drill Series EX Standard of high efficiency drilling and highly accurate drilling AQUA drill EX, enter the stage Realize high speed/high efficiency drilling with new flutes geometry and AQUA coating,
More information25 Removal of the fricative sounds that occur in the electronic stethoscope
25 Removal of the fricative sounds that occur in the electronic stethoscope 1140311 2014 3 7 ,.,.,.,.,.,.,.,,.,.,.,.,,. i Abstract Removal of the fricative sounds that occur in the electronic stethoscope
More informationFig. 1 Schematic construction of a PWS vehicle Fig. 2 Main power circuit of an inverter system for two motors drive
An Application of Multiple Induction Motor Control with a Single Inverter to an Unmanned Vehicle Propulsion Akira KUMAMOTO* and Yoshihisa HIRANE* This paper is concerned with a new scheme of independent
More informationbotek_8p.indd
DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS Throw away type Deep hole drilling tools botek Type 01, 07, 07A Sole Agent MURAKI LTD. (MACHINE & TOOL DIVISION) Tokyo, Osaka, Nagoya & Fukuoka Type 01 Type
More informationA5 PDF.pwd
DV DV DV DV DV DV 67 1 2016 5 383 DV DV DV DV DV DV DV DV DV 384 67 1 2016 5 DV DV DV NPO DV NPO NPO 67 1 2016 5 385 DV DV DV 386 67 1 2016 5 DV DV DV DV DV WHO Edleson, J. L. 1999. The overlap between
More information