SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing pr

Size: px
Start display at page:

Download "SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing pr"

Transcription

1 PRODUCT NEWS 刃先交換式ボールエンドミル No. 9 新製品 スウィングボール ネオ SWBX/MSWX形 NEW PRODUCT 曲面加工 肩削り コーナR 溝削り コーナR シャンクタイプ モジュラータイプ φ φ0

2 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing process & machining welding parts for die in D machining..applicable to not only roughing process but also semi-finishing process due to high repeatability on mounting insert..adopted new PVD coated grades JC0 for steel and JC & JC0 for cast iron, mold steel, welding & hardened die steel. Key on the body Key way on the insert bottom Insert grade Radius form accuracy for rotation for steel JC0 for cast iron, mold steel and welding & hardend die steel. JC, JC0 Insert with breaker for low cutting force (-HM/-HS type) adopted insert grades: new PVD coated grade JC0 for steel improved both fracture toughness and wear resistance. JC can be widely plied such as general & mold steel and cast iron. Strong edge type Insert (-MMW/-MSW type) adopted JC & JC0 is possible to machine welding & hardened die steel (0-0HRC) mm R.7 0.0mm Insert No. Actual

3 Cutting performance Cutting force comparison Low cutting depth Material.79,D (raw) Tool dia., Down cut, Dry High cutting depth Material.79,D (raw) Tool dia., Down cut, Dry Main blade (Resultant force) Sub blade (Resultant force) Total (Resultant force) Main blade (Resultant force) Sub blade (Resultant force) Total (Resultant force) Competitor A Competitor A SWBX insert: 00 SWBX insert: 00 In case of low cutting depth, SWBX type insert reduced % cutting force compared with competitor A. In case of high cutting depth reduced 0% cutting force. Tool life comparison.79,d (raw) Material.79,D (raw) Tool dia. Overhung Insert Down & up cutdry Cutting length New grade (JC0) Conventional grade Competitor A Max. flank wear SWBX type insert improved tool life by. times compared with competitor A, and. times compared with conventional grade. Stainless steel MaterialStainless steel Tool dia.overhung Insert Down & up cutwet Max. flank wear Cutting length New grade (JC) Competitor A SWBX type insert improved tool life by times compared with competitor A..79 (welding, 0HRC) Material.79,D (welding, 0HRC) Tool dia. Insert Down & up cut Dry Max. flank wear Cutting length New grade (JC0) Competitor A SWBX type insert improved tool life by. times compared with competitor A.

4 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Body (End mill type/straight shank type) Cutting conditions Cat. No. Stock No. of inserts Dimensions Main blade Sub blade Peripheral blade SWBX-00-S SWBX-000-S SWBX-00-S SWBX-00-S SWBX-0-S SWBX-00-S SWBX-0-S Note). All cutters are supplied without inserts.. All cutters are supplied without wrench & MOLY.. Please see page 7 for the details of machined form. Standard stock itemssoon to be stockedsoon to be deleted

5 Cat. No. Inserts Main blade Sub blade Peripheral blade Parts Clamp screw Wrenchnot be included For main & sub For peripheral For main & sub For peripheral SWBX-00-S SWBX-000-S0 SWBX-00-S0 SWBX-00-S SWBX-0-S SWBX-00-S SWBX-0-S SWBXHM SWBXMMW SWBX0HM SWBX0MMW SWBX0HM SWBX0MMW SWBXHM SWBXMMW SWBXHM SWBXMMW SWBX0HM SWBX0MMW SWBX0HM SWBX0MMW SWBXHS SWBXMSW SWBX0HS SWBX0MSW SWBX0HS SWBX0MSW SWBXHS SWBXMSW SWBXHS SWBXMSW SWBX0HS SWBX0MSW SWBX0HS SWBX0MSW ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL DSW-H DSW-07H DSW-07H TSW-0H TSW-0H DSW-H DSW-H TSW-H TSW-H TSW-H TSW-H DSW-H DSW-H A-0SD A-0 A-0 A- A- A-0 A-0 A-0 A-0 A-0 A-0 A-0SD A-0SD Clamp screw DSW-H DSW-07H TSW-0H DSW-H TSW-H Recommended torque..... Standard stock itemssoon to be stockedsoon to be deleted

6 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ MSWX TYPE Modular head MSWX type Through coolant hole Arbor Cutting conditions Cat. No. Stock No. of inserts Main blade Sub blade Dimensions Inserts Main blade Sub blade Clamp screw Parts Wrenchnot be included MSWX--M MSWX-0-M0 MSWX--M MSWX-0-M Note). All cutters are supplied without inserts.. All cutters are supplied without wrench & MOLY.. Please see page for recommended tightening torque.. Please see page 7 for the details of machined form. SWBXHM SWBXHS SWBXMMW SWBXMSW SWBX0HM SWBX0HS SWBX0MMW SWBX0MSW SWBXHM SWBXHS SWBXMMW SWBXMSW SWBX0HM SWBX0HS SWBX0MMW SWBX0MSW DSW-H DSW-07H TSW-0H DSW-H Clamp screw DSW-H DSW-07H TSW-0H DSW-H A-0SD A-0 A- A-0 Recommended torque.... Standard stock itemssoon to be stockedsoon to be deleted

7 Attention Attention to mounting head and MSN/ MGN shank holder. Cleaning Remove dirt and chips with air from the connecting thread and face of modular head and MSN/MGN shank holder. Initial Tightening Tighten by hand until the head and the shank holder faces touch. Final Tightening Tighten slowly with torque control spanner wrench or DIJET DS type spanner wrench and confirm that there is no g. Attention : Final tightening without initial tightening cause connecting thread damage. Note). Use the torque control spanner wrench or DIJET DS type spanner wrench.. Please gently ply pressure on wrench.. Please confirm that there is no g between MSN/MGN shank holder and modular head. Tightening procedure Thread M M0 M M Tightening Torque Nm Nm 0Nm Nm Spanner size 0,, 7, 9, Note). Modular heads are supplied without spanner wrench.. In case of choosing torque control spanner wrench, confirm that the wrench size is match to the dimensions W & C of each modular head. (There are some cases that modifying the thickness of spanner wrench is necessary). mark shows: DIJET have a stock of DS- and type spanner wrenches. Selection of "MSN Carbide shank holder" In case of using modular head over mm, please select MSN carbide shank that diameter (D) is mm or more smaller than modular head (Dc). A wrong selection causes damage to the carbide shank. MSN carbide shank neck diameter Clearance necessary more than 0.mm Coolant or air blow is recommended to flushing the chips. Modular head tool diameter Caution for the mounting to shrink fit holder. When you use a carbide shank and a modular head on the shrink fit holder, please shrink fit the only carbide shank without mounting a modular head together. Please mount a modular head after shrinking fit operation. Note) In case of shrink fit MSN shank + modular head together, it will be difficult to loose due to heat desipation.

8 MSN TYPE Indexable Ball Nose End Mill スウィングボールネオ Through coolant hole SWBX/MSWX For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Fig. Coolant hole dia. Fig. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight Fig. MSN-M-0-SC 0 7. MSN-M-0-SC MSN-M-0T-S0C MSN-M-77T-S0C M 0.9 MSN-M-0-SC 0. MSN-M-0-SC MSN-M--SC MSN-M0-0-S0C MSN-M0-0-S0C MSN-M0-0T-S0C MSN-M0--S0C MSN-M0-T-SC. 0. MSN-M0--S0C M0 0.0 MSN-M0-T-S0C MSN-M0-0-S0C MSN-M0-0T-S0C MSN-M0-0-S0C MSN-M0-0-S0C Note) Please see page for recommended tightening torque. 7 Standard stock itemssoon to be stockedsoon to be deleted

9 MSN TYPE Through coolant hole For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Fig. Coolant hole dia. Fig. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight Fig. MSN-M--SC MSN-M--SC 0 MSN-M-00T-SC MSN-M-0-SC 0 M.0 MSN-M--SC.0 MSN-M--SC 0. MSN-M-00-SC 00. MSN-M--SC 9 MSN-M--SC 0 9. MSN-M-77-SC MSN-M-97-SC MSN-M-0-SC MSN-M-7T-SC MSN-M-7-SC MSN-M-7T-SC MSN-M--SC M..0 MSN-M-77-SC MSN-M-77T-SC MSN-M-9-SC MSN-M-97T-SC MSN-M--SC 9.7 MSN-M--SC MSN-M-9-SC Note) Please see page for recommended tightening torque. Standard stock itemssoon to be stockedsoon to be deleted

10 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ MSN TYPE Through coolant hole For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Coolant hole dia. Straight arbor type Cat. No. Stock Dimensions kg Weight MSN-M-97S-SC MSN-M-7S-SC 7 M MSN-M-97S-SC MSN-M-07S-SC MSN-M-7S-SC 07 7 M 0.0 MSN-M0-0S-SC 0 0. MSN-M0-S-SC M0 0. MSN-M0-0S-SC 0 9 MSN-M0-0S-S0C 0 MSN-M0-S-S0C 0 M0 MSN-M0-0S-S0C 0.0 MSN-M-S-SC MSN-M-S-SC M 0.9. MSN-M-S-SC MSN-M-S-SC M.07. MSN-M-S-SC 0.9 MSN-M-S-SC M. MSN-M-S-SC.0 MSN-M-0S-SC 0. MSN-M-0S-SC 0 M.77 MSN-M-0S-SC 0. MSN-M-7S-SC 7. MSN-M-7S-SC MSN-M-7S-SC 7 7 M..9 MSN-M-7S-SC 7. Note) Please see page for recommended tightening torque. 9 Standard stock itemssoon to be stockedsoon to be deleted

11 MGN TYPE Through coolant hole MGN G-Body steel shank holder Adopted ultra-rigid and improved body durability "G-Body". Short type Cost-effective and high strength steel shank holder. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight MGN-M-7-S MGN-M0-0-S0 MGN-M--S MGN-M--S MGN-M-7-S MGN-M-77-S M M0 M M M M Note). In case of using modular head combined with MGN steel shank holder, ply the recommended cutting conditions sheet (see page 7 ).. Please see page for recommended tightening torque. Adopted GN surface-hardening treatment on thermal resistant high strength steel gives high hardness over HRC and secure insert pocket and holder against thermal deformation, improved body durability and tool life by 0% or more, compared with competitor's tool. Make it difficult to be damaged even under severe cutting conditions. Also rust-proof and anti-welding effect is much improved. Adopted GN surfaceplease scan the below QR code for the other arbor (MSA type intergrated carbide shank) Standard stock itemssoon to be stockedsoon to be deleted 0

12 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Inserts Fig. (Main blade for low cutting force) Fig. (Sub blade for low cutting force) Fig. (Main blade for welding & hardened material) Fig. (Sub blade for welding & hardened material) Fig. (Peripheral blade) Cat. No. Type PVD coated Dimensions JC0 JC JC0 Fig. SWBXHM SWBXMMW Main (for low cutting force) Main (for welding & hardened material) SWBXHS Sub (for low cutting force)... SWBXMSW SWBX0HM SWBX0MMW Sub (for welding & hardened material) Main (for low cutting force) Main (for welding & hardened material) SWBX0HS Sub (for low cutting force) SWBX0MSW Sub (for welding & hardened material) SWBXHM Main (for low cutting force).... SWBXMMW SWBXHS SWBXMSW Main (for welding & hardened material) Sub (for low cutting force) Sub (for welding & hardened material) SWBX0HM SWBX0MMW SWBX0HS SWBX0MSW Main (for low cutting force) Main (for welding & hardened material) Sub (for low cutting force) Sub (for welding & hardened material) ZPMT000ZER-PL Peripheral 0. 0 inserts per case. Note). Please see page for cutting conditions and page for the details of machined form.. Be sure to use the same type & the same grade for main & sub blade together. Standard stock itemssoon to be stockedsoon to be deleted

13 Work Vertical MC (HSK)WorkVertical MCWorkVertical MC Cutting data Machining turbine blade Result Overhung length: Compared with competitor's, MSWX reduced machining time by half and improved tool life by times (machined 00 works). No chatter and good surface roughness. WorkVertical MCTool Cutting conditions Part name Material Hardness Tool No. Insert No. n, Vc Vf, f Coolant Machine Turbine blade Stainless steel (.0) Water soluble Machining stamping die Part name Stamping die Material.79, D Hardness Tool Tool No. Insert No. Result Overhung length: After 7. hours (cutting length: km), inserts showed normal wear and were still able to continue. Cutting conditions n, Vc Vf, f Coolant Machine Mist coolant Machining forging die Part name Forging die Material.7 Hardness Tool Tool No. Insert No. Result Overhung length: Total machining time of roughing & finishing is 0 hours. No chatter and good surface roughness. Cutting conditions n, Vc Vf, f Coolant Machine Roughing: mm, finishing: mm Roughing: mm, finishing: mm Air blow Machining welding part Part name Stamping die Material.79+welding Hardness Tool Tool No. Insert No. Result Overhung length: Machined welding part for hour. Inserts were still good conditions (no breakage and normal wear). Cutting conditions n, Vc Vf, f Coolant Machine Air blow

14 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for Swing Ball-NEO mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),000 0,00 0,00 0,00 0,000 0,00 0,00 0,00,00 0,00 0,000 0,000,000,00,00, ,00 0,0 00,00,00,00,00,000,000,000 00,00,00 0, ,00 0,00 00,00,00 0,000 00,00 0,00 0,0 0,00 0,00 0,00 0,00 0,00 0,00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.

15 Recommended cutting conditions for Swing Ball-NEO 0mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),0,00 0,0 0,00 0,0 00, 0,00 0,0,0,00 0,00 0,0,0,000,00,0 0,00 0,0 0, 00,00 0,0,00,00,00 0,0,000,0 00 0,00 0,0 0 0, ,0 0 0, 0,0,00 0,00 0, ,0 00 0,0,0 0, 0,0 0,00 0,0,0 0,0 0,0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.

16 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for Swing Ball-NEO mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),0,00,0,00 0,00 0,00 0,00 0,0,000,00,00 0,0,0,00 0,0,00 0,00 0,00 00,00 0,0,0,00 0,00 0,0,0..,00 0..,0 0..,00 0..,00 0..,00 0,0 0..,00 0..,00 0..,0.., 00 0,0 0 0, 0 0,0 0 0,0 0 0, 0 0,0 0 0,0 0 0, 00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.

17 Recommended cutting conditions for Swing Ball-NEO 0mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) JC n (min - ) JC n (min - ) MMW/MSW JC0 JC n (min - ) MMW/MSW JC0 n (min - ) JC MMW/MSWJC0 n (min - ) JC0 JC n (min - ) n (min - ), ,0 0, 0 0,00 0 0,00 0,00 00,00 0,00,0 0,0 0,00 0 0, ,00,00 0,0 0, 0 0, ,00 0 0,00 0,00 0,00,0 0,0 0, ,00,00 0,00 7 9,0 0 9, 00 9, ,00 0 9,00 00.,00,00 9,0 0 9, ,00 7 9,00 0, 0,0,0 0,00,0 0, 0,0 0,00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.

18 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for MSWX and MSN Materials (S0C,SC) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) 0-HRC (.,P0) 0-HRC NAK0,P) -HRC (.,P) -HRC (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 Insert type Grade 0 JC0 00 JC 0 0 JC 00 JC0 0 0 JC0 00 JC JC JC HW/HS JC 00 MMW/MSW 0 0 MMW/MSW JC JC 00 MMW/MSW 0 0 JC 00 JC0 0 0 JC JC (min - ) (mm/min).0,00,0,00,0,00,0.0,000,00,000,00,00,0.0,000,00,000,00,00,00.0,00,00,00,00,000,00.0,00,00,00,00,000,00,000,00 0.,00,00 0.,00 0.,00,00, , ,000,00.0,000,00 0.,00,00.0,000,00,000,00,00,0.0,00,00,00,00,000,00.0,00,0,00,0,00, Tool dia (min - ) (mm/min).,00,0,00,0 0.,000,00.,000,00,000,00 0.,00,00.,000,00,000,00 0.,00,00.,00,0,00,0 0.,00,00.,00,0,00,0 0.,00,00 0.9,00,00,00,00,0 0.,0 0., ,00 0.,00,00.0,00,00 0.,0,0.,000,00,000,00 0.,00,00.,00,0,00,0 0.,00,00.,00,0,00,0 0.,000, (min - ) (mm/min).,00,0,00,0 0.,00,00.,00,0,00,0 0.,00,.,00,0,00,0 0.,00,.,00,00,00,00 0.,000,00.,00,00,00,00 0.,000,00.0,0,0, ,00 00,00 0.,00 0,00 0.,00,00.0,00,00 0.,0,00.,00,0,00,0 0.,00,.,00,00,00,00 0.,000,00.,00,0,00,0 0.,00,00 NOTEThe figure to be adjusted according to the machine rigidity or work rigidity. Use air blow. 7 SWBX type Note) At center point as shown in above figure, material can be left as mentioned in chart. Machined form by Swing Ball-NEO

19 Materials Insert type Grade (min - ) Tool dia. (mm/min) (S0C,SC) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) 0-HRC (.,P0) 0-HRC NAK0,P) -HRC (.,P) -HRC (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 JC0 JC JC JC0 JC0 JC JC JC JC MMW/MSWJC0 MMW/MSW JC0 JC MMW/MSWJC0 JC JC0 JC JC ,000,00,000,00,0,0,00,0,00,0,00,00,00,0,00,0,00,00,0,00,0,00,00,000,0,00,0,00,00,000,00,00,00 0,00 0,00 0,00 0,00,00,00,00,00,00,00,0,00,0,00,00,0,00,0,00,00,000,000,00,000,00,0,0 NOTEThe figure to be adjusted according to the machine rigidity or work rigidity. Use air blow. Maximum plunging depth and feed rate for Swing Ball-NEO Materials (FC,FCD,GM) Cast iron (GG,GGG) Cast steel, Alloy steel, Die steel Max.value f (mm/rev) f (mm/rev) f f Tool dia

20 DIJET INDUSTRIAL CO., LTD. 本 社 大阪市平野区加美東丁目番号 TEL 代表 FAX Headquarters --, Kami-Higashi, Hirano-ku, Osaka 7-000, Jan Phone: Fax: 国内 拠 点 東 京 支 店 東関東営業所 大 阪 支 店 大阪営業所 -00 埼玉県三郷市中央1丁目8番地2 Residencia 善F 大阪市平野区加美東2丁目1番18号 TEL TEL FAX FAX 富山営業所 南関東営業所 -0 神奈川県横浜市神奈川区鶴屋町2丁目26番地4 第3安田ビルF TEL 富山市西大泉17番20号 浜忠第二ビル 1-B TEL FAX FAX 広島営業所 北関東営業所 7-0 群馬県太田市小舞木町614番地 7-00 広島市南区東雲1丁目23番15号 板村ビル1F 103号 TEL. 07 TEL. 0 7 FAX FAX. 0 7 九州営業所 仙台オフィス 9-0 仙台市宮城野区榴岡5丁目2番3号 -00 福岡市博多区博多駅前4丁目3番3号 博多八百治ビルF TEL TEL FAX FAX 名古屋 支 店 名古屋営業所 -00 名古屋市昭和区明月町1丁目39番地2 エクセル御器所F TEL FAX. 0 場 大阪事業所 大阪市平野区加美東2丁目1番18号 三河営業所 -00 愛知県安城市三河安城南町1丁目15番地10 シティタワーF TEL 工 FAX TEL 三重事業所 -00 三重県伊賀市伊勢路758-14 TEL 浜松オフィス FAX. 09 富田林工場 -00 大阪府富田林市中野町東2丁目1番23号 0-09 静岡県浜松市中区砂山町340番地の7 TEL. 0 FAX FAX TEL FAX. 07 海外拠点 DIJET GmbH (Europe) Immermannstr.9 00 Düsseldorf, Germany Phone , 00 Fax DIJET INDUSTRIAL CO., LTD. (Bangkok Representative Office) 99 Srinakarindr Road, Modernform Tower th Floor, Kweang Suanluang Khet Suanluang, Bangkok 00, Thailand Phone. --7-, 9 Fax DIJET INDUSTRIAL CO., LTD. (Shanghai Representative Office) Room No.00 Tomson Commercial Building., Dongfang Rd., Shanghai 00, China Phone Fax DIJET INDUSTRIAL CO., LTD. (Guandong Representative Office) Rm. JF, A Building, Lotus Plaza, Xianxidadao Road, Changan Town, Dongguan City, Guangdong Provence, 0 P. R., CHINA Phone , 00 Fax 技術相談フリーコール サンキュー ハ イ サンキュー 営業企画課 FAX ご使用上の注意 DIJET INDUSTRIAL CO., LTD. (Chengdu Office) RM.No.0, No.BLDG.A-B Stand, Hi-Tech Incubation Garden, No.0 Tianfu Avenue North, Hi-Tech District, Chengdu City, Sichuan, P.R.CHINA Phone. --- Fax DIJET INDUSTRIAL CO., LTD. (Wuhan Office) B-, Jiayu Jianyin Business Masion, No.0 Chuangye Road, Wuhan Eco. & Tech. Development Zone, Wuhan City, Hubei 00, China Phone Fax DIJET INDUSTRIAL CO., LTD. (Mumbai Representative Office), ARCADIA Hiranandani Estate, Patlipada, G.B. Road, Thane (W) 00 07, India Phone Fax DIJET Incorporated (U.S.A.) 07 Helm Street, Plymouth, MI U.S.A. Phone Fax インターネットホームページ 工具を安全にご使用いただくために 不適切な切削条件で使用しないでください 大きな摩耗や欠けのある工具は使用しないでください 切りくずの飛散 巻き付きによるケガにご注意ください 又 保護眼鏡や安全カバーをご使用ください Grinding produces hazardous dust. To avoid adverse health, use adequate ventilation and read Material Safety Data Sheet first. WARNING: Cutting tools may fragment in use. Wear eye protection in the vicinity of their operation. 工具仕様は 改良のため予告なく変更することがあります Specification shall be changed without notice. 販売店 00SS.A

No488_1804

No488_1804 PRODUCT S No. 488 SERIES EXPANSION Spot facing drill Spot facing drill with point angle of 180 (flat face). Size range: 1-14mm dia. JCTMA 2015-018 ECO PRODUCT Flat Face Application Spot facing slope Spot

More information

No483_1710

No483_1710 PRODUCT NEWS No. 483 NEW NEW PRODUCT for high feed machining with 4corners. SKG/MSG SKS-G SKG / MSG type, innovative high feed cutter achieved extremely excellent chip removal rate! SKS-G SKS-G Feature

More information

DIJET - Carbide Holders.pdf

DIJET - Carbide Holders.pdf PRODUCT NEWS No. 07 B FU INEUP Fits all major manufacturers Straight Neck type 5 Items Taper Neck type Items Staight Arbor type Items Different type carbide shank holder from M to M bore diameters with

More information

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT PRODUCT NEWS No. 0 NEW PRODUCT SSE series 0 SSD0 SSE JCTMA ECO PRODUCT SSD0 0 JCTMA ECO PRODUCT series SSE, SSD0 Dijet-mill SSE type SSE For general use and face milling Features SSE gives wide application

More information

PRODUCT NEWS No. 397 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB

PRODUCT NEWS No. 397 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB PRODUCT NEWS No. 7 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB Swing Ball series SWB/SWE Indexable Ball Nose End Mill SWB TYPE Features The most suitable inserts from raw material

More information

H1-H4.ai

H1-H4.ai PRODUCT NEWS No. 44 FU INEUP NEW TA-EZ TEZD "Indexable EZ DRI" TEZD type JCTMA 213-6 ECO PRODUCT 超硬工具協会 (JCTMA) 環境認定製品です "Indexable EZ DRI" achieved easy assembly and high cutting performance. Indexable

More information

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach

More information

No468_1609

No468_1609 高能率荒加工用工具 No.468 新製品 NEW PRODUCT QM MAX GⅡ GMX / MXG 形 QM MAX GⅡ GMX / MXG type with high efficient roughing. 高能率 効果コスト削減 Achieved high efficient & economical machining!! 新チップ材種 New insert grade / チップ厚み

More information

mirror1604

mirror1604 PRODUCT NEWS No.5 SERIES EXPANSION BNM typebnm-c type RNM typernm-c type MBN typembn-h type / MRN typemrn-h type MIRROR BALL MIRROR RADIUS MIRROR BALL BNM BNM-C MIRROR BALL carbide shank series are possible

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong

More information

BNM

BNM Features and benefits 1. Ultimate precision indexable ball nose endmill with two effective teeth Radius form accuracy : below m (Radius form accuracy of insert : below m) 2. Precision clamp screw mounting

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

アクアEXオイルホールロング(CC2015).indd

アクアEXオイルホールロング(CC2015).indd High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

SGドリルシリーズ_CC2015.indd

SGドリルシリーズ_CC2015.indd SG Drill Series High performance PMHSS Drills High performance PMHSS Drills Powder HSS with SG Coating and the tool life is 2 times of conventional coated drills. Extremely precise positioning and Stable

More information

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 OSG-WALTER Vol. 5 F3000 Series F3010 P3F90R NEW WAK25 F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 2 INSERT SIZE & APPLICABLE CUTER INSERTS APPLICATION CHART Inserts Application Chart Product

More information

No472_1610

No472_1610 高能率荒加工用工具 No.472 新製品 NEW PRODUCT EXTREME DIEMATE ボアタイプ φ50 φ モジュラータイプ φ32 φ40 EXTDM / MTX 形 チップ両面仕様 難削材対応 ラジアスカッタ Indexable radius cutter for hard-to-cut material with double-side insert. タービンブレード加工に最適!

More information

00_1512_SLIMLINE_BOOK.indb

00_1512_SLIMLINE_BOOK.indb PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity

More information

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing AERO End Mill High Speed Carbide End Mills for Aluminum Alloys Vol.4! New cutting data on specials! LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute,

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

KOMET KUB K2® 小径対応ヘッド交換式ドリル

KOMET KUB K2® 小径対応ヘッド交換式ドリル KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also

More information

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

メタルバンドソー

メタルバンドソー Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

More information

TURNING INERT NEW RODUCT 2014 ocket Guide

TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 3 7 11 13 15 18 20 24 26 28 30 34 38 40 44 45 47 3 ocket Guide 2014 ocket Guide 2014 4

More information

Features Features FeaturesThread milling cutters 1

Features Features FeaturesThread milling cutters 1 Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons

More information

H1-H4

H1-H4 No.489 Plunging Tools SEC-PDL/ SEC - SEC-Plunge Drill PDL Type/ SEC-Plunge Mill Type Having an edge in pocketing and deep contour milling! Lineup of 10 items each from the PDL type / type! Achieving stable

More information

Thread Milling Cutter Series

Thread Milling Cutter Series Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials

More information

No474kai_1802

No474kai_1802 刃先交換式ドリル 座ぐり加工用 No.474 改 新製品 NEW PRODUCT 先端角 1 フラット φ14 φ (1.5Dタイプ) Indexable spot facing drill with point angle of 1 (flat face). Size range: φ14- φmm dia. (Drilling depth: 1.5D) Indexable Spot facing

More information

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a SG Drill Series High performance PM-HSS Drills High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning and Stable

More information

タップ総合

タップ総合 1 2 3 4 N NEW タップシリーズ N Tap series ねじ加工に適した高バナジウムハイスの使用により 汎用タップながらも長寿命 高剛性設計で安定ねじ加工を実現 Nスパイラルタップ NSP By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads

More information

高硬度金型(60HRC) の高速切削

高硬度金型(60HRC) の高速切削 High-Speed Cutting of Hardened (60HRC) Die Mold Kunio Naito, Kazutaka Ogo, Yasuhisa Takada, Kazuki Watanabe, Kenji Wada 40HRC60HRC 60HRC CBN Hardened die mold steels have been conventionally As a result

More information

Thread Mill Series

Thread Mill Series Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank

More information

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed

More information

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i 内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining

More information

Technology Features of ABPF type New product: -flute ball end mill ( to ) compatible with machines ranging from general-purpose manufacturing machines

Technology Features of ABPF type New product: -flute ball end mill ( to ) compatible with machines ranging from general-purpose manufacturing machines New Product News No.6- Planing Side Cutting Profiling adius 5- Applications Pat. No. 5666 Can be chosen from three kind of grade according to the work material. The efficiency improve in finishing process.the

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

アクアドリルEX改定.indd

アクアドリルEX改定.indd AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD AQDEXOHD AQDEXOHD AQDEXZ Delivering high-performance consistently in a wide range from moderate-low to high speeds AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD

More information

ALシリーズ.indd

ALシリーズ.indd アルミ専用エンドミル 倍刃長タイプ AD- AD- NS の A シリーズは あらゆる条件で安定した高能率加工を実現 コストパフォーマンスに優れた高剛性 倍刃長タイプ NS の A シリーズは あらゆる条件で安定した高能率加工を実現 幅広い領域で安定した加工面精度が得られ 高速加工でもビビリを抑制 A-series realized a stable and high efficient machining.

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ "R"Zero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ R ゼロホルダ RZero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです ターニングツールTurning Tools for SPEEDIO STシャンーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic

More information

02-03 HSK-AEFC.indb

02-03 HSK-AEFC.indb H S K 267 CTSA New Super tite-lock Milling Chuck Slim design milling chuck. Specially designed slits enables heavy endmilling. Multibore tool system 5690 13416075 HSK40A -CT16SA - 75 1 2 16 45 75 50 26

More information

MRBTNH230

MRBTNH230 高硬度材への深彫り加工で真価を発揮する Show its higher ability by deep milling for high hard materials. 無限コーティングプレミアム ロングテーパーネック 2 枚刃ボールエンドミル MRBTNH230 MUGEN-COATING PREMIUM 2-Flute Long Taper Neck Ball End Mill 最適化したテーパーネック形状

More information

AME type Roughing End Mill AME New Product News No

AME type Roughing End Mill AME New Product News No AME type Roughing End Mill AME New Product News No.1212-3 2019-4 New variations of coating, introducing AJ coating series. Nicked inserts enable suppression of chattering in heavy milling! Cutting Applications

More information

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools for high-rate machining of steels, prototype cutters

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted by

More information

ON A FEW INFLUENCES OF THE DENTAL CARIES IN THE ELEMENTARY SCHOOL PUPIL BY Teruko KASAKURA, Naonobu IWAI, Sachio TAKADA Department of Hygiene, Nippon Dental College (Director: Prof. T. Niwa) The relationship

More information

Contents 1 Contents 1 2 USB3.0 Connectors Plug Cables USB Connectors Mini-B Receptacles 3 Plugs HDMI Connectors Type E Receptacles 6 Plu

Contents 1 Contents 1 2 USB3.0 Connectors Plug Cables USB Connectors Mini-B Receptacles 3 Plugs HDMI Connectors Type E Receptacles 6 Plu ELECT R ONIC COMPONENT S IFC07 B-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents 1 Contents 1 2 USB3.0 Connectors Plug Cables 2 3 4 USB Connectors Mini-B Receptacles 3 Plugs 4-5 6 7 HDMI

More information

OSG Product Catalogue VOL-2.pdf

OSG Product Catalogue VOL-2.pdf IPG CARBIDE END MILLS & DRILLS S SERIES 2 FLUTE SHORT SMG-EDS 2 FLUTE SHORT WITH PREMIER COATING TA-SMG-EDS S S 1 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 PRe

More information

Nachi - AQDEX

Nachi - AQDEX The next generation solid carbide drill Series Series AQDEX AQDEXR AQDEXOH3D AQDEXOH5D AQDEXOH8D 3D 5D Realize stable, high efficiency drilling in wide area, from medium and low speed up to high speed

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F 01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries

More information

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate

More information

429

429 WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B

More information

TC-32BN QT TC-32BN FT 1 2

TC-32BN QT TC-32BN FT 1 2 BROTHER MACHINE TOOLS BROTHER INTERNATIONAL CORP. MACHINE TOOLS DIV. TECHNICAL CENTER 2200 North Stonington Avenue, Suite 270, Hoffman Estates, IL 60169, U.S.A. PHONE:(1)224-653-8415 FAX:(1)224-653-8821

More information

_H1-H4_1011

_H1-H4_1011 Headquarters 2-1-18, Kami-Higashi, Hirao-ku, Osaka 547-0002, Ja Phoe: 81-6-6791-6781 Fax: 81-6-6793-1221 PRODUCT NEWS No. 497 NEW PRODUCT NEW for high efficiet shoulder millig. EXSAP/MSX DIJET GmbH (Europe)

More information

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3 BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted

More information

Fig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T

Fig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.

More information

ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys

ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool system 機能付きホルダFunction Holder プルスタッドRetention Stud シャンク規格Tool

More information

A5 PDF.pwd

A5 PDF.pwd DV DV DV DV DV DV 67 1 2016 5 383 DV DV DV DV DV DV DV DV DV 384 67 1 2016 5 DV DV DV NPO DV NPO NPO 67 1 2016 5 385 DV DV DV 386 67 1 2016 5 DV DV DV DV DV WHO Edleson, J. L. 1999. The overlap between

More information

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed a series of researches on continuous cooling transformation

More information

商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16.

商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16. BT HDC A 高精度コレットホルダ BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHigh-Precision Collet Holder ドリル加工 リーマ加工 仕上エンドミル加工に最適 Suitable for drilling, reaming and finish endmilling. ターニングツールTurning Tools for

More information

汎用ツール 汎用 用 ー 特徴 FEATURES P.9- NT -CTH <NT Shank> HARD CHUCK 標準セット A,B A-set, B-set P.49 H G NT No. MODE CODE H G NTW -CTH20 U NT40(M) -CTH25 -CTH U NT

汎用ツール 汎用 用 ー 特徴 FEATURES P.9- NT -CTH <NT Shank> HARD CHUCK 標準セット A,B A-set, B-set P.49 H G NT No. MODE CODE H G NTW -CTH20 U NT40(M) -CTH25 -CTH U NT 汎用ツール < 汎用機用 >ハードチャック < 汎用機用 > 正面フライスアーバA 型 < 汎用機用 >ハードチャック ( 標準セットA) < 汎用機用 >ハードチャック ( 標準セットB) < 汎用機用 >ハードチャック < 汎用機用 >Sホルダ (QCホルダ) Sホルダ ( 標準セット ) Sホルダ本体 (QCホルダ) テーパスリーブ (Sコレット) ハードチャック (S2コレット)

More information

1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times t

1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times t 1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times the Dia, from the end of the rope. B A B point Position

More information

075 B Tooling by MSN JCTMA ECO PRODUCT MSN-M6-12-S10C MSN-M6-15-S12C MSN-M6-30-S10C MSN-M6-30-S12C MSN-M6-35T-S12C MSN-M6-50-S10C MSN-M6-50-S12C MSN-M

075 B Tooling by MSN JCTMA ECO PRODUCT MSN-M6-12-S10C MSN-M6-15-S12C MSN-M6-30-S10C MSN-M6-30-S12C MSN-M6-35T-S12C MSN-M6-50-S10C MSN-M6-50-S12C MSN-M 075 MSN JCTMA ECO PRODUCT MSN-M6-12-S10C MSN-M6-15-S12C MSN-M6-30-S10C MSN-M6-30-S12C MSN-M6-35T-S12C MSN-M6-50-S10C MSN-M6-50-S12C MSN-M6-57T-S12C MSN-M6-65T-S16C MSN-M6-80-S10C MSN-M6-80-S12C MSN-M8-20-S16C

More information

汎用ツール

汎用ツール 汎用ツール < 汎用機用 >ハードチャック < 汎用機用 > 正面フライスアーバA 型 < 汎用機用 >ハードチャック ( 標準セットA) < 汎用機用 >ハードチャック ( 標準セットB) < 汎用機用 >ハードチャック < 汎用機用 >Sホルダ (QCホルダ) Sホルダ ( 標準セット ) Sホルダ本体 (QCホルダ) テーパスリーブ (Sコレット) ハードチャック (S2コレット)

More information

Journal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp

Journal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp 58 00847 53 * ** ** Journal of Japan Institute of Light Metals, Vol. 58, No. 008, pp. 47 53 Production of aluminum tall container with flange by hydraulic bulging with compression of surrounding material

More information

<8B5A8F70985F95B632936EE7B22E696E6464>

<8B5A8F70985F95B632936EE7B22E696E6464> 47 Electrical Discharge Truing for Electroplated Diamond Tools Koji Watanabe Hisashi Minami Hatsumi Hiramatsu Kiyonori Masui (211 7 8 ) Electroplated diamond tools are widely used for grinding because

More information

5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²

More information

無標題-1

無標題-1 Professional cranes & hoists for lifting SOFT START/STOP Reduction Gear Motor CHENG DAY MACHINERY WORKS CO., LTD. No. 173, Wen Chiu Road, Dajia District, Taichung City, 37 Taiwan. Tel: +88--288-1581 Fax:

More information

untitled

untitled Coaxial shaft type VRS VRB VRL VRT VRS series VRB series VRL series VRT series VRXF VRXF series VRG VRG series ABLE REDUCER ABLE REDUCER Reducer Selection Tool ABLE REDUCERABLE REDUCER ABLE REDUCERABLE

More information

388599-P036-P041

388599-P036-P041 Die life improvement of flat type punches for hot forging Morihiko Nakasaki, Koji Era, Hiroyuki Myochin and Ichiro Takasu Synopsis: Since forged products have been required more complex and net-shape,

More information

利隆塑料

利隆塑料 w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented

More information

cms.pdf

cms.pdf RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Terminal pin lick spring Ground terminal Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated

More information

455-omote+

455-omote+ No.455 For steel industry and eavy industry Inserts and Holders or eavy duty turning SNMM Type inserts wit N and N cip reakers or Rouging RCMT Type inserts wit N Type cip reaker or cip control New coating

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181 These items are using an aluminum alloy cast, so the weight is corrosion-resistant and excel halo tolerance and is light-weight and it's about 1/3 compared with conventional cast iron and made of steel

More information

No499_1810

No499_1810 No.499 シリーズ拡張 SERIES EXPANSION フェースミルタイプ HEPTA MILL facemi type HEP-FM 形 φ0~φ200 Size rage: 0-200 mm dia. 高切込み高送りが可能 刃先強度に優れ経済的な 7 角形インサート採用 ボアタイプフライス Facemi type 近日発売 COMING SOON Fig.1 b φdb φd a Lf Fig.2

More information

botek_8p.indd

botek_8p.indd DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS Throw away type Deep hole drilling tools botek Type 01, 07, 07A Sole Agent MURAKI LTD. (MACHINE & TOOL DIVISION) Tokyo, Osaka, Nagoya & Fukuoka Type 01 Type

More information

銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Coppe

銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Coppe 銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Copper Electrode - DRB230. バリを最小限に抑えた高精度な加工を可能にするシャープな刃形状!

More information

LC304_manual.ai

LC304_manual.ai Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06

More information

Huawei G6-L22 QSG-V100R001_02

Huawei  G6-L22 QSG-V100R001_02 G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/

More information

Safety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------

More information

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U 汎用 用 ル ル S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High rigidity makes the

More information

OSG Product Catalogue VOL-2.pdf

OSG Product Catalogue VOL-2.pdf TAPS SPIR POINTED TAP SERIES GENER APPLICATION EX-POT Suitable for through hole tapping of carbon steels, alloy steels and nonferrous metals whose chips are produced in continuous coil form. These taps

More information

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U < 汎用機用 > S ホルダ ( Q C ホルダ ) S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High

More information

1215_MFM_H1-H4.ai

1215_MFM_H1-H4.ai 030 SUMIBOON small diamete Ball-nose & adius endmills 2007-027 Fo hadened steels even with a hadness exceeding 0HC!! Long tool life in pe-hadened steel and hadened steel applications that demand high speeds

More information

Photo. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a

Photo. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a Work Rolls in Hot Strip Mills Hidemaro KAWAHARA Synopsis: The work roll materials in hot strip mills and the damages of rolls which arise in rolling operation are discussed in this paper. As for the rolls

More information

Fig. 1 Hydrostatic Thrust Bearing Fig. 2 Point loading of elastic half-space

Fig. 1 Hydrostatic Thrust Bearing Fig. 2 Point loading of elastic half-space Characteristics of Hydrostatic Bearing/Seal Parts of Hydraulic Pumps and Motors for Water Hydraulic Systems (2nd Report, Theory) Xiongying WANG, Atsushi YAMAGUCHI In this paper, the characteristics of

More information

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc. -temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in

More information

03-03 Bush Mentori.pdf

03-03 Bush Mentori.pdf 54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1

More information

DIN Connector_p2-25.qxd

DIN Connector_p2-25.qxd INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A

More information

アクアドリルシリーズ

アクアドリルシリーズ AQUA Drill Series EX Standard of high efficiency drilling and highly accurate drilling AQUA drill EX, enter the stage Realize high speed/high efficiency drilling with new flutes geometry and AQUA coating,

More information

<836F F332E706466>

<836F F332E706466> DC Power Jacks DCP0 B-0 Contents Contents & Specifications DC Power Jacks( RC-0A Standard) Product Lineup DC Power Jacks DC Power Jacks Product Lineup DC Power Jacks Specifications Insulation Resistance

More information

ドリルドリVP-GOLD RECOMMENDED DRILLING CONDITIONS VP- ゴールドドリル切削条件基準表 低 軟鋼 Low SCM SCr Special Hardened Steel 28HRC 28 34HRC N/ mm 2 Cutting 38 50m/

ドリルドリVP-GOLD RECOMMENDED DRILLING CONDITIONS VP- ゴールドドリル切削条件基準表 低 軟鋼 Low SCM SCr Special Hardened Steel 28HRC 28 34HRC N/ mm 2 Cutting 38 50m/ 切RECOMMENDED ドリル-VP- ゴールドドリル切削条件基準表 VP-GOLD RECOMMENDED DRILLING CONDITIONS VPH-GDS VP-GOLD VゴールドドリルP Cutting 34 43HRC 1060 1400N/ mm 2 調質鋼 Hardened Steel 特殊鋼 Special 43 48HRC 1400 1600N/ mm2 48 53HRC

More information

高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMa

高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMa 高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMaster INDEX A-TAP is A-TAP Features 3 Cutting Conditions

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se

More information