P001.pdf

Size: px
Start display at page:

Download "P001.pdf"

Transcription

1 Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL RADIO CONTROLLED ELECTRIC POWERED TOURING CAR SERIES PureTen EP WD CHASSIS KIT KX-One INDEX Required for operation Radio preparation Before you begin Assembly Operating your model safely Spare parts & Optional parts Exploded View SAFETY PRECAUTIONS This radio control model is not a toy. First-time builders should seek the advice of experienced modellers before commencing assembly and if they do not fully understand any part of the construction. Assemble this kit only in places out of children's reach! Take care before operating this model. You are responsible for this model's assembly and safe operation! Always keep this instruction manual ready at hand for quick reference, even after completing the assembly. Ni-Cd The product you have purchased is powered by a rechargeable battery. The battery is recyclable. At the end of its useful life, under various national / state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. *SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. 00 KYOSHO No. 00

2 NI-CD BATTERY JRM No.70 NI-CD BATTERY 0AT THE FINEST RADIO CONTROL MODELS R JRM R REQUIRED FOR OPERATION () ch with electronic speed controller and servo radio control set CAUTION: Only use a surface radio with channels and electronic speed controller! (Any other radio is prohibited!) This kit requires a channel radio control set with electronic speed controller. Because there are stick-type and wheeltype transmitters, use which ever fits your convenience best. For more information on the radio control set, refer to its instruction manual. Stick-type ch radio set Wheel-type ch radio set AA-size Batteries (For Transmitter) Suitable servos, receiver & electric speed controller Standard Size Servo Electric Speed Controller Receiver 0mm Approx. 0mm AA AA 0 9mm 0mm 50mm Approx. 50mm 6 mm Operation/Receiver Battery and Charger for Ni-Cd Battery A single Ni-Cd battery powers operation and receiver. Batteries listed right are suitable. Two types of chargers are available. One operates on a V car battery. The other operates on a 00V house outlet. 7.V-000mAh XFORCE 7.V-00mAh XFORCE V-00mAh Ni-Cd Battery 7.V-000mAh XFORCE Ni-MH Battery XFORCE 000 X- DC X-CHARGER DC Ni-MH Separate Type Battery is also available. X- AC X-CHARGER AC for 7.-8.V Ni-Cd & Ni-MH Ni-Cd Motor Use a 50 size motor. Tire / Wheel / Inner Sponge (Pure Ten Size) Body 90mm /0 This kit does not include a body shell. Purchase one for :0 scale cars, with about 90mm in width. mm Gear ratio included in the kit suits T motor. Use tires, wheels and Inner Sponge less than mm width. 5 Paint and Brush PAINT BRUSH For painting the body, use Kyosho paints for models! No.0 POLYCA COLOR No KYOSHO SPRAY COLOR CAUTION: Before using spray colors, always read their explanations! KY OSH O S PR AY CO LO R MICRON LINE TAPE No.8 (mm x 5m) KYOSHO 8 (.5mm x 5m) 8 (.5mm x 5m) 859 (0.mm x 8m) 860 (0.7mm x 8m) Super-flexible tape for masking and detail designing jobs. Micron Line Tape No.9670 D FLEX COLOR DECAL Self-adhesive super-flexible sheets that bond to polycarbonate - even when applied to curved surfaces. No.97 MASKING SHEET For safe masking jobs, use this plastic masking sheet featuring one self-adhesive edge.

3 REQUIRED FOR OPERATION () Tools required Phillips Screwdriver ( L. M. S. ) Needle Nose Pliers CAUTION: Handle tools carefully! Instant Glue Sharp Hobby Knife TOOLS INCLUDED Hex Wrench Grease Wire Cutters Awl Rubber Cement Threadlocker (screw cement) Cross Wrench Grease No.80 SPECIAL TAPER REAMER No need to pre-drill! Drills neat mm to 5mm holes directly! No.89 ROUND CUTTER & SANDER For trimming bodies! Cutting along curved lines never was so easy! RADIO PREPARATION A new Ni-Cd battery must be charged before it is used. Refer to the charger instruction manual for charging. Set up the radio control system as indicated below. Ni-Cd Battery Charger Electronic Speed Controller 7 ON 9 OFF Transmitter ON OFF Servo START Receiver Install batteries. (Transmitter) Extend the antenna. (Transmitter) Connect the Ni-Cd battery. Extend the antenna. (Receiver) Center the trims. Switch on. (Transmitter) Switch on. (Receiver) Switch Make sure the servos are in command. 9 0 FINISH 9 0 Switch off. (Receiver) Switch off. (Transmitter) Retract the antenna. (Transmitter)

4 BEFORE YOU BEGIN () Read through the manual before you begin, so you will have an overall idea of what to do. Check all parts. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. How to read the instruction manual: Front Suspension 5 x 0mm Metal Bushing No., No.5, No.6 This instruction manual uses several symbols. Please note them during the entire assembly. 5 King Pin mm Pillow Ball (Black) 6 R 7 L 5 8 Key Number, Part Name, True-to-scale Diagram, Quantity Used All parts except screws are identified by key numbers. For purchasing spare parts, find the key no. of the part needed in the spare part list and refer to the left column to look up the corresponding order no. Symbols used throughout the instruction manual, comprise: Assemble left and right sides the same way. Assemble in the specified order. Apply instant glue (CA glue, super glue). mm Drill holes with the specified diameter (here: mm). True-to-scale diagram. Apply rubber cement. Cut off shaded portion. Must be purchased separately! x Apply grease. Assemble as many times as specified (here: twice). Apply threadlocker (screw cement). Ensure smooth non-binding movement while assembling. Tentatively tighten. 90 Pay close attention here! No.90 Ball bearings are optional! (with optional part no.)

5 BEFORE YOU BEGIN () 5 This kit contains screws and hardware in different metric sizes and shapes. Before using them, check the screws on the true-to-scale diagrams on the left side in each assembly step. Some screws are extras. SCREWS Screw Self-tapping (TP) Screw OTHER HARDWARE Screw Washer Nut E-ring Cap Screw TP F/H Screw mm mm mm mm Flat Head (F/H) Screw Set Screw F/H Screw mm Metal Bushing Bearing 5mm Pillow Ball mm 0mm 5.8mm 6 Self-tapping (TP) screws cut threads into the parts when being tightened. Excessive force may permanently damage parts when tightening TP screws. It is recommended to stop tightening when the part is attached or when some resistance is felt after the threaded portion enters the plastic. Correct Wrong Overtightened. The threads are stripped. MEMO 5

6 ARRANGEMENT OF PLASTIC PARTS ON RUNNERS No No. 78 Shaded parts are not used No.7 Shaded parts are not used. No.8 Shaded parts are not used

7 Chassis No.,0 x 8mm Screw 8 For Right Side. x8mm x8mm x8mm x8mm For Left Side. Chassis No.,0 x 6mm Screw x 0mm Round Head Screw x 8mm TP TP Screw x8mm For Left Side. x0mm x6mm 7

8 Chassis No.,,,9,0 x 8mm Screw x mm F/H Screw 9 x 6mm Screw x 0mm TP TP Screw x mm Round Head Screw 5 7 x6mm 0 x 8mm TP TP Screw 5 6 Note the direction. x0mm 7 Aluminum Frame Spacer x8mm xmm 8 xmm x8mm(tp) x0mm Front One Way Unit No.,0 x 6mm Screw x 8mm Ball Bearing Note the direction. x6mm 8 Apply instant glue (CA glue, super glue).

9 5 Gear Differential 5 Note the direction. No Place the differential balls into 6 and apply ball differential grease. Ball Differential Grease Remove oil deposits from 7 and 8 before applying a small amount of ball differential grease to the spots marked with 7 8 x 9.6 x 5mm Cap Screw Apply grease on 0, and put on 8pcs. x 8mm Ball Bearing 0 Thrust Washer /6 Thrust Ball 8 6 / Ball 8 Thrust Plate.6x5mm Follow illustration below, to tighten.6 5mm Cap Screw properly Secure parts and 5 in place with two flat head screwdrivers and rotate the differential case until it becomes tight. Then, tighten screw 9. When running the car, the differential must be tight, otherwise it may damage and mm Hex Wrench 5 9 Now, hold the differential case firmly and rotate part 5. If part rotates into the opposite direction to part 5, no further adjustment is necessary. If part does not rotate, screw 9 is too tight. In this case, gradually loosen screw 9 until part rotates. 5 5 MAINTENANCE As soon as the ball differential's smooth action becomes rough, parts 6, 8, 0 and may have become "gritty". If this happens, disassemble the unit and clean these parts, apply more grease and reassemble. If the action is still not smooth, the parts are worn and, therefore, must be replaced. We recommend that these parts be replaced from time to time to ensure smooth running. Apply grease. x Apply instant glue (CA glue, super glue). Assemble as many times as specified. 9

10 6 Chassis No.,, x 5mm Ball Bearing 8 Bearing Color (Rear) Note the direction. 0 6 Note the direction. 7 8 Wipe out oil. Rolling it, insert x 0mm Ball Bearing Place Drive Belt properly as illustration shown. 9 Bearing Color (Front) 0 A Front Cup Joint A Note the direction. Note the direction. x 0mm TP TP Screw x 0mm Round Head Screw Install as illustration shown. x 6mm Screw x 8mm TP TP Screw x0mm(tp) x mm Round Head Screw x0mm x6mm x8mm x6mm x8mm x0mm(tp) xmm 0 Pay close attention here!

11 7 Chassis No.,,,0 7 0 x 5mm Ball Bearing 8 Bearing Color (Rear).6x8mm x 8mm TP TP Screw x8mm x8mm.6 x 8mm TP TP Screw B Front Cup Joint B Wipe out oil. Rolling it, insert Chassis x mm Set Screw No.,0 mm Place Set Screw as shown. Do not tighten too much. xmm xmm Adjust to place the pulley center as shown. Make sure the pulley rotates smoothly. xmm Pay close attention here!

12 9 Motor Plate No.,0 mm x 5mm F/H Screw x 8mm F/H Screw 6 5 mm Nut x5mm 6 7mm Aluminum collar 6 6 x8mm 0 Center Pulley No., Cut the excess plastic xmm Apply threadlock and place on flat part. 0 Place the pulley under the belt. mm x 8mm Ball Bearing mm Nylon Nut x mm Set Screw xmm Adjust the space by the xmm set screw, so they don't touch each other. Pay close attention here! Apply instant glue (CA glue, super glue). Apply threadlocker (screw cement).

13 Tensioner No.,0 x 8mm Cap Screw 6 mm Washer 6 5 x 0mm Ball Bearing 6 5 Install the belt as illustration shown. Tension Collar x 8mm mm mm x 8mm Adjust Belt Tension Press by the finger and tighten the screw. Do not tighten too much. Loosen slightly. ( same as opposite side) x 6mm Screw 6 Install 6 Spur Gear. T 8T Generally loosen the belt tension when using big torque type motor such as T. While tighten the belt tension when using high revolution type such as 8T. If tighten the belt tension too much, it may cause bad response and skip the belt teeth. 6 x6mm Tentatively tighten. Apply instant glue (CA glue, super glue).

14 Shock Stay x 0mm Cap Screw mm Nut No.,0 < For Front > 7 x0mm mm Nylon Nut x 8mm TP TP Screw x 8mm Screw 9 mm 8 mm Nylon Nut < For Rear > x8mm x 0mm Screw 9 5.8mm Pillow Ball 50 x8mm(tp) x0mm 8 mm Tapered Washer mm Ball Nut mm x8mm x0 mm Front Suspension No.5,0.6 x 6mm Round Head Screw < For Right Side > Cut little by little not to crack the part. 8 8 < For Left Side> 5 5 Short Long Short Long.6x6mm < For Right Side > < For Left Side > Pay close attention here! Assemble left and right sides the same way. Cut off shaded portion.

15 No.5,0 Front Suspension < 9 5.8mm For Right Side> Pillow Ball mm 8 mm 8 Tapered Washer 9 mm Nylon Nut x 0mm Ball Bearing Apply threadlock. Flame a moment when disassemble the parts. x 5.5 x 9mm Pin 59 L King Pin (L) 60 LL King Pin (LL) < Right > 58 Not to tighten too much Note the direction. < Left > 6 58 x 8 x mm Plastic Collar Not to tighten too much. mm mm 5 Front Suspension No.,5,0 E.5 E E-ring 6 Suspension Shaft < Right > 9 8 < Left > 9 5.8mm Pillow Ball 65.8mm (S) Ball Stud (S) 8 mm Tapered Washer E Apply grease. Assemble left and right sides the same way. Ensure smooth non-binding movement while assembling. Assemble in the specified order. Assemble as many times as specified. x 5

16 6 Front Suspension No.5,0 67 x 57mm Shaft 66 Sponge E.5 E.5 E E-ring E.5 7 Front Suspension No mm L Ball End (L) 69 x 0mm Adjustable Rod The side with the step is a reverse screw. mm approx. mm x 6 True-to-scale diagram. Assemble left and right sides the same way. x Assemble as many times as specified.

17 8 Front Suspension No.,5,0 xmm x mm Set Screw 7 Stabilizer Ball xmm 7 7 x 0mm Screw Insert 7 as shown. x0mm xmm 7 Tighten the set screws and make sure part 7 is stable. No.6 9 Rear Suspension mm Pillow Ball 8 8 mm 75 Tapered Washer Parts assembled step 6 5 x 0mm Ball Bearing 6 x Pay close attention here! Ensure smooth non-binding movement while assembling. x Assemble as many times as specified. Assemble left and right sides the same way. Assemble in the specified order. 7

18 0 Rear Suspension No.,6,0 E.5 E E-ring 6 Suspension Shaft < Left > < Right > mm (S) Ball Stad (S) Note part 75 has each right and left different shape. Lean the tires toward the right way as illustration shown. 75 Use this hole E Cut off shaded portion if part 75 and 76 contacts Rear Suspension No.6,0, 67 x 57mm Shaft E.5 E E-ring 78 x 6 x mm Plastic Collar E E.5 No.6 Rear Suspension The side with the step is a reverse screw. 6mm approx. 6mm x mm L 79 x mm Ball End (L) Adjustable Rod Pay close attention here! Assemble left and right sides the same way. x Assemble as many times as specified. True-to-scale diagram. 8

19 No.6,0 Rear Suspension 0.8mm (M) Ball End (M) x 0mm Set Screw x 6mm Screw 0 x 0mm x xmm 7 5 x mm Set Screw 7 Stabilizer Ball 6mm approx. 6mm 5 x6mm No.,6,7 Oil Shock 8 Apply Silicon Oil. 8 O O-ring (White) 8 Shaft Slider (White) 85.8mm (S) Ball End (S) For Front : pcs For Rear : pc 0mm : For Front mm : For Rear x 5 x mm Plastic Collar 8 85 Grab with a piece of cloth. For Front For Rear x x 5 Oil Shock No Stop-ring O O-ring (Black) Silicon Oil (For shock absorber) Thrust in the Pressure Top 90 as shown with care not to tear it up and have it stick fast. Wipe out oil flown over with facial tissue or the like. 90 Pressure Top x Move down the piston and put some oil. Move up and down the piston slowly to get rid of air bubbles. Pay close attention here! True-to-scale diagram. Assemble as many times as specified. Assemble in the specified order. Ensure smooth non-binding movement while assembling. Assemble left and right sides the same way. x 9

20 6 Oil Shock No.7 5 This is for adjusting the spring. Compress the spring for inserting 9. 9 There are types of 9. You can adjust the car clearance to be level fore and aft while running by picking up correct types mm Ball 5 mm Shock Stopper x 7 Oil Shock No.7 95 Shock Aluminum Collar mm Plastic Nut Note the direction < Front > Note the direction < Rear > 0 Assemble left and right sides the same way. x Assemble as many times as specified.

21 8 Radio.6 x 6mm F/H Screw 0 5.8mm Servo Ball.6 x 6mm Round Head Screw.6 x 6mm TP TP Screw x 6mm Round Head Screw x 6mm TP Round Head TP Screw No.8, Use the screws included the servos Insert 0 through 00 ( 0 or 0 ) to install 99 spring. After installing 99 spring, pull 0 away. 98 Use following screws for alternative x6mm { Choose this part, depending on the servo. HITEC FUTABA KO JR SANWA No. No.5 No..6 x 6mm.6 x 6mm x 6mm x 6mm Screw TP Screw Screw TP Screw 0 Place the servo under neutral condition. 9 Radio No.,8,0 Short x0mm mm L Ball End (L) Long 05 x 0mm Adjustable Rod x 0mm Screw (silver) mm mm Washer Nut mm mm The side with the step is a reverse screw. 7mm approx. 7mm x Must be purchased separately! Assemble left and right sides the same way. Tentatively tighten. x Assemble as many times as specified. True-to-scale diagram.

22 0 Radio No.0 x 5mm Screw mm Washer mm x5mm Servo Backward Front Pulley Place Servo Horn center of the chassis. Place the servo backward not to contact Front Pulley. No.,8,0 Radio x 0mm Screw x mm Screw mm Washer 5 07 mm If there is a space here, insert mm washer between x0mm mm mm Nut xmm mm mm xmm Tentatively tighten. Assemble left and right sides the same way.

23 Motor No.8,0 x 8mm Screw mm Washer x mm Set Screw mm Motor x8mm.5mm Hex Wrench Insert a sheet of paper between both gears and tighten both screws that hold the motor. xmm 08 Firimiy tighten the set screw on to flat spots. Radio Plate No.9,0 x mm TP TP Screw x 0mm Set Screw 8 x0mm Cut off shaded portion. 0 x0mm 0 09 Tighten with.5mm Hook Pin. Do not tighten too much. xmm 5mm 09 xmm Cut off shaded portion. Must be purchased separately! Cut off shaded portion. Assemble left and right sides the same way.

24 Radio Plate No.,9,0 x8mm Hook Pin x 8mm F/H Screw 5 Radio Hook Pin No.9,0 Place Receiver and Speed Controller parallel with chassis. Speed Controller Receiver Antenna 6 AMB In case of using AMB Transmitter. ( Transponder) 5 Double-sided Tape 5 Double-sided Tape Switch Take care of wiring. Part is removal for changing a battery. Connect as per radio equipment instruction manual. Strap down the cords as they may trail on the ground or into moving parts. 7 Assemble left and right sides the same way. Must be purchased separately!

25 6 Tire Mould Inner mm Use tires for /0 Touring Car. ( less than mm width) In case wheels contact Rear Sus Arm, cut off the part of Rear Sus Arm. x Insert the wheels inside the tires as shown. Twist the tire onto the wheel. After fitting them together, pour instant glue along the seam. 7 Tire and Front Bumper No.,,9,0 x8mm 8 x mm Pin x 8mm TP TP Screw < Front > 9 mm Flanged Nylon Nut 0 x Assemble all four tires the same way. Take care not to tighten too much. 6 8 x8mm mm x Assemble as many times as specified. Pay close attention here! Apply instant glue (CA glue, super glue). Ensure smooth non-binding movement while assembling. 5

26 8 Body Mounts x 6mm TP TP Screw No.8,0 Adjust height of body mount depending upon kind of body. Cut off excess part. < Front > x6mm 9 Body Mounts x 6mm TP TP Screw No.8,0 Adjust height of body mount depending upon kind of body. Cut excess comes down. x 8mm Screw mm Nut mm < Rear > Note the direction. Top x6mm x8mm Apply threadlock. 0 Battery No.9 Attach after battery is loaded. Disconnect Ni-Cd battery when it is not in use. < > < Straight Packed Battery > Ni-Cd Battery < > < Separated Battery > Sponge Tape Apply Sponge Tape if there is a space between Battery and Radio Plate. 6 Cut off shaded portion. Pay close attention here! Assemble left and right sides the same way. Must be purchased separately!

27 Body Shell No.0 Hook Pin No.9965 When using Altezza body, drill holes to match the chassis. Gear Ratio Spur 05T 0T 5T 0T 5T Pinion Combine Spur & Pinion according to the motor. T T T 8.0 Included in this kit. 0T T T T T 5T 6T 7T 8T 9T 0T T T T T 5T 6T 7T 8T 9T 50T Shock Adjustment No.,7 Rebound Adjustment Piston Function Speed Adjustment 5 xx0.mm Shim x5 x mm Plastic Collar 6 5 x x 0.mm Shim x5xmm Using Plastic Collar makes the length of Shock short. Also adjust the length, screwing Shock End. A Piston A B Piston B E. E E-ring T Motor : 0 : 0 pc 8T T Motor : : pcs Adjust Front Shock little longer than Rear Shock. Generally use a shorter shock on slippery surface. On the other hand, use a longer shock on high traction surface. Lifting up the car and down, balance both right and left tires on the ground at the same time. Using mobile Piston A, it makes difference speed of extending and shrinking. Under the original condition, extending speed is faster than shrinking speed. When the difference of extending and shrinking speed is big, it would be easier to turn mildly. While the difference is small, it gives quick response of steering. Must be purchased separately! Pay close attention here! 7

28 Front Hub 58 Location of Knuckle Arm can be adjusted. 59 Set 9 x8xmm 6 9 x8xmm Plastic Collar is placed under Knuckle Arm. Set 58 x8xmm Standard 58 x8xmm Plastic Collar to both below and above the Knuckle Arm. Set 9 x8xmm 9 x8xmm Plastic Collar is placed over the Knuckle Arm Set Set Set for high grip track. Set for low grip track, but this is up to your preference. If the location of Plastic Collar is changed, Chassis Height and Rebound should be adjusted, too. Front Toe Angle Adjust by changing the length of Steering Rod. Toe - in Toe - out Steering Characteristics Straightline stability becomes better. Mild steering. Quick steering. Camber Angle To change Camber Angle, adjust the length of Upper Rod. Making longer. Positive Camber Shortening. Negative Camber Front / Rear Steering Characteristics Front Steering becomes milder. Rear Rear tire grip becomes worse when entering corners. Front Enters corners more aggressively. Rear Gives rear tires more grip when entering corners. MEMO 8 Ensure smooth non-binding movement while assembling.

29 Operate the model in spacious areas with no people around! Do NOT operate it:. on roads!. in places where children and many people gather!. in residential districts and parks!. indoors and in limited space! * Non-observance may account for personal injury and property damage! OPERATING YOUR MODEL SAFELY WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents!) Always check the dry batteries in the radio! When the dry batteries get weaker, transmission and reception of the radio decrease. You may lose control of your model when operating it under such condition. This may lead to accidents! Keep in mind that people around you may also operate a radio control model! NEVER share the same frequency with somebody else at the same time! Signals will be mixed and you will lose control of your model. This may lead to accidents! When the model is behaving strangely...! Immediately stop the model and check the reason. As long as the problem is not cleared, do NOT operate it! This may lead to further trouble and unforeseen accidents! Do NOT put fingers or any objects inside rotating and moving parts! Rotating / moving at high speed, you may be seriously injured! After operation, the electric motor and Ni-Cd battery are hot! You may burn yourself seriously touching them! WARNING: in order to avoid accidents and personal injury, be sure to observe the following: Before charging, please carefully read the explanations of the Ni-Cd battery and charger unit! While charging, the Ni-Cd battery and charger unit get hot! NEVER charge on top of or near easily inflammable material as this will result in fires! NEVER short out Ni-Cd batteries!. Do NOT disassemble or modify Ni-Cd batteries!. Ensure the cords do NOT trail into rotating and moving parts! Ni-Cd batteries use heavy metals that are noxious to health! NEVER throw them into fires as they will explode! ALWAYS return disused Ni-Cd batteries to the shop! Do NOT dispose of them into the usual waste stream! 9

30 PRE-RUN CHECKLIST Are all screws securely tight? Are the radio batteries fully charged? Are the onboard batteries fully charged? Is the backlash properly adjusted? Does the car's steering react according to your transmitter inputs? Does the speed (electric speed controller) change according to your transmitter inputs? Is the Ni-Cd battery securely attached? Is the running area safe? Is nobody using the same frequency as you do in the same running area at the same time? A the wheels and tires securely attached? Are all rotating parts greased? Do moving parts not contact anywhere? Do the shocks move and damp? EVERYDAY MAINTENANCE Make sure screws and nuts are securely tightened and parts are not worn. Grease all rotating parts. Repair wiring if for example cords drag on the ground or cords are damaged. Should the servo cords and the antenna be damaged, get them repaired by their manufacturers. Make sure the suspension train ist broken due to crashes. Make sure that gears are not worn or damaged. Remove dirt from the chassis. 0

31 BATT. BATT. BATT. BATT. BATT. BATT. BATT. / PROPER OPERATING PROCEDURES Fully charge the Ni-Cd battery. Check the transmitter batteries. Make sure the throttle control is in neutral. CH- CH- CH- CH- Connect the Ni-Cd batter 5 Extend the transmitter antenna. 6 Switch on the transmitter. ON CH- CH- CH- CH- OFF ON Switch on the receiver. Make sure the model steers according to your transmitter inputs. Make sure the speed (electric speed controller) changes according to your transmitter inputs. ON CH- CH- CH- CH- 0 Make sure the running area is safe. / AFTER FINISHING RUNNING After finishing running, collect your car. Do not leave on the racing car. STOP Switch off the receiver. OFF Switch off the transmitter. CH- CH- OFF ON OFF 5 Disconnect the Ni-Cd battery. Remove dirt from the chassis. OFF CHECK When NOT using the model, always switch off the receiver and transmitter! Furthermore, disconnect the Ni-Cd battery and remove it from the model! This may lead to overheat and fires!

32 TROUBLESHOOTING Steering control servo does not operate. Transmitter and/or receiver is not switched on. Transmitter batteries are weak. Improper radio installation. Switch on. Replace with new batteries. Correct as per radio instruction manual. Motor does not run. Ni-Cd battery capacity is insufficient. Improper radio installation. Loose connectors. Motor trouble. Recharge Ni-Cd battery. Correct as per instruction manual. Make connectors tighter with minus screwdriver. Replace with a new motor. Motor runs but car does not run. Pinion gear is not installed. Or, screw is loose. Tighten screw that holds pinion gear. Not enough speed. Wheels hardly rotate/do not rotate at all. Ni-Cd battery capacity is insufficient. Electronic speed controller is not properly adjusted. Dirt entered rotating parts on wheels. Backlash is too tight. Recharge Ni-Cd battery. Adjust throttle trim (transmitter). Should electronic speed controller not shift into high, readjust it as per instruction manual. Clean and regrease. Readjust as per instruction manual. Even when releasing throttle, car does not run. Electronic speed controller is not properly adjusted. Adjust throttle trim (transmitter). Should electronic speed controller not shift into high, readjust it as per instruction manual.

33 SPARE PARTS No. No. Part Names Quantity KX00 Spur Gear Shaft 0 x (0T) KX00 8 x 7 Drive Pulley Set (0T) x 500 KX00 Tensioner Set 5 x 600 KX00 7 x Frame Collars 6 x 07 x 600 KX005 Motor Mount 5 x 00 KX006 TypeA Front Shock Stay TypeA 7 x 00 KX007 TypeA Rear Shock Stay TypeA 50 x 500 KX008 Diff. Housing 7 x 700 KX009 Diff. Cup Joint 5 x 000 KX00 (9T) Pulley Set (9T) 5 x x 800 KX0 Front Suspension Plate 68 x 00 KX0 Suspension Shaft 67 x 700 KX0 Universal Swing shaft x 600 KX0- KX0- Wheel Shaft Drive Shaft 56 x 57 x KX0-5 Joint Pin Set 55 x 600 KX0 Front One way Unit x 00 KX05 One Way Cup Joint 0 x 900 KX05- Sponge ( for Cup Joint ) 66 x 8 00 KX06 5.8mm (S) 5.8mm Ball Nut (S) 0 x KX07 Shock Absorbing Tape x 00 KX09 KX0.8mm.8mm Knuckle Plate 7 x 8 x KX0 KX0 Drive Belt Main Chassis x x KX Direct Servo Saver x 700 KX05 0 Battery Holder Set x 09 0 x 600 KX Plastic Parts Set 9 06 x 6 x 500 KX07 Frame Set 5 x 600 KX x Bumper Set 7 x x KX09 (KX-One) Decal (KX-One) x 600 LA (L) King Pin (L) 59 x 0 LA 5.8mm 5.8mm Ball End 70 x 00 OT6VB Knuckle Arm 5 5 x 500 OT 5.8mm 5.8mm Ball 9 x 0 50 OTW S 79 x Adjust Rod (S) 00 OTW M Adjust Rod (M) 05 x 00 SP0 Drive Hub, Pulley Set x 00 SP0B Suspension Arm Set x 600 SP07V- Rear Hub x 00 FOR JAPANESE MARKET ONLY. No. No. Part Names Quantity LL SP King Pin (LL) 60 x SPW5 Adjust Rod Set 69 x 650 SPW5BK (M) Urethane Bumper (M) Black 0 x 500 SPW0 -V Front Hub 6 6 x 9 x 58 x 600.8mm UM.8mm Ball End 85 0 x 6 00 UM9 Diff. Ring 8 x 500 / UM0 / Ball 6 x 00 UM 9 Diff. Adjust Screw x 50 UM9.8mm (S).8mm Ball Stad (S) 65 x 00 WBD7 Diff. Adjust Spring x 50 W0 mm 8 x 0 mm Tapered Washer 50 W x Shock Case (Plastic Parts) 9 x W60 T Pinion Gear (T) 08 x 600 W60 0T Spur Gear (0T) 6 x mm 5.8mm Pillow Ball 9 x S 7 x 8 KP/KY Fluorescent Nylon Strap (S) Pink / Yellow Color Antenna (Black Cap) 6 x Shock Case 80 x Shock Cap 88 x Lower Cap Set 8 8 x Stop-ring Set x mm mm O-ring (White) 8 x mm 5.8mm Ball Set 95 x Assy Variable Piston Assy. 8 x 700 xx0.mm xx0.mm Shim Set 5 x E. x xmm xmm Pin 8 x Snap Pin x Suspension Shaft 6 x E.5 x mm 5.8mm Ball Nut 5 x Body Mount x x Double-sided Tape 5 x x 5mm 0 x 5mm Ball Bearing 7 x Diff. Thrust Bearing 0 x x x 0mm 6 x 5 x 0mm Ball Bearing x 8mm x 8mm Ball Bearing x 000 Some of the parts included are not available as spare parts. Purchase optional parts instead.

34 OPTIONAL PARTS FOR JAPANESE MARKET ONLY. No. No. No. Part Names Quantity No. Part Names Quantity KXW0 90 Titanium Screw Set Light Weight / BK Aero Wheel (5-spoke / black) KXW0...6, / Front Stabilizer Set Diameter:.,.6,.8mm 600 Aero Wheel (5-spoke / white) 800-8W KXW0.,.,.6,.8,.07 x Rear Stabilizer Set 90-5 V M-5MN Diameter:.,.,.6,.8,.0mm 900 V Slick Tire M-5MN 000 (mm JMRCA 90-0 KXW0 V M-0MN 5 5 = V Slick Tire M-0MN Includes pcs. Medium 000 Rear Belt Tensioner Prevent from skipping the belt at 00 Narrow Size (mm width) the time of breaking and reverse V M-5MN V Slick Tire M-5MN 5 5 = Soft Hard KXW05 Multi Ride Height Gauge For measurement Multi Ride Height 800 Racing Battery Holder Made from Carbon. Light weight. 99 On-road Spring Set Includes kinds (each) (S) KXW06 On-road Spring Set (S) Includes kinds (each) 800 Oneway Universal SwingShaft Gives quick response of steering with One Way Bearing on Drive Shaft. 967 Super Narrow Wheel 00 (mm JMRCA RC M Racing Slick Tire M Includes pcs. Super SPW0V 7 7 M-0 Front Hub 7 Hub Carrier ( 7 camber) Racing Slick Tire M-0 Narrow Size 00 SPW M = Soft Hard Front Hub 0 Hub Carrier (0 ) 600-0V -0 Racing Slick Tire M-0 00 SPW6 SP 990 SP Gear Holder Aluminum Gear Holder 500-8S Aerodish Wheel 8pcs SPW (H) Hard Rear Hub Aluminum Rear Hub (0 ) 00-8H Aerodish Wheel (H) 8pcs SPW Hard Rear Hub Aluminum Rear Hub ( ) 00 -BK Aerodish Wheel (Black) pcs W509 M-5MN Damper Oil Decal 5 difference color. For sign of oil container Racing Slick Tire M-5MN (mm JMRCA 00 W600 (0T) 990 M-0MN /6 600 Pinion Gear (0T) -0 Racing Slick Tire M-0MN 00 Includes pcs. Medium 990 M-5MN Narrow Size Matches with /6 Inch Racing Slick Tire M-5MN 00-5 W6050 (50T) 5 0 = Soft Hard Pinion Gear (50T) Pitch Pinion Gear Motor M-0MN -0 Racing Slick Tire M-0MN 00 W605 05T 990 Spur Gear (05T) 50 MN-0-0 Mould Inner Form MN-0 (mm 00 0T 990 W60 MN-0 Spur Gear (0T) 50-0 Mould Inner Form MN-0 Includes pcs. Medium 00 /6 5T /6 Inch Pitch Spur Gear 990 Narrow Size W65 MN-0 Spur Gear (5T) 50-0 Mould Inner Form MN = Soft Hard 00 W65 5T (S) Spur Gear (5T) Dual Springs (S) Special Antenna Holder Aluminum Antenna Holder 500 (M) 99 Dual Springs (M) Hobby Shears & Sander 000 (H) 99 Dual Springs (H) Use with 99. A set 00 Includes different type mm Body (ALTEZZA) 99 Matches with 90mm chassis. 000 Ring Set of springs.( each) 600 Makes various spring Precision Camber Gauge For best alignment 997 Dual Springs (S) hardness Assy - Piston Shaft Assy steps adjustment available 90 Loctite (medium strength) Fixes screws (0T) T Xspeed Modified Motor 800 Ball Diff. Grease Stops vain slip of Ball Differential 800 Gives big power in HG 800 HG Joint Grease Decreases a friction (7T) severe competition T Xspeed Modified Motor One Way Bearing Grease Prevents from slipping of One Way Bearing T -SS Xspeed Stock Motor SS x7mm 5x7mm Shim Set To make up for extra space of wheel parts X-FORCE 000 X-FORCE 00 Straight NI-MH Battery Straight NI-CD Battery x6mm x6mm Shim Set To make up for extra space of wheel parts X DC X CHARGER DC DC DC Battery Charger for NI-MH X AC C Taper Reamer Handy to drill a hole for body mount Maintenance Stand Convenient stand for work 800 Team 878 KYOSHO Team KYOSHO Transmitter Bag Transmitter Carrying Bag (H) On-road Spring Set (H) Includes kinds. (each) 800

35 No. Part Names No. Qty Silicone Oil (00) Silicone Oil (50) Silicone Oil (00) 50 for shocks Silicone Oil (50) Silicone Oil (00) Silicone Oil (50) OPTIONAL PARTS 00 FOR JAPANESE MARKET ONLY. No. No. No. Part Names Qty. No. Part Names Qty Silicone Oil (00) Silicone Oil (000) Silicone Oil (500) 9675 Silicone Oil (000) for shocks Silicone Oil (600) Silicone Oil (5000) for diffs Silicone Oil (800) Silicone Oil (6000) Silicone Oil (000) Silicone Oil (7000) for diffs Silicone Oil (000) FOR JAPANESE MARKET ONLY. mm mm No. Size (mm) QUANTITY No. Size (mm) QUANTITY No. QUANTITY 00 Round Head Screw Round Head Self-Tapping Screw 00 Nut x6 x8 x0 x5.6x8.6x0.6x.6x x x6 x8 x0.6x6.6x8.6x0.6x 7 7 mm.6mm mm mm 0 each 0 each x x6 x8 x0 x x6 x8 x0 x x x x6 x8 x0 5 x5 x6 x8 x0 00 Flanged Nut x6 x8 x0 x x x x6 x8 6 7 x5 x0 x5.6x.6x5.6x6.6x mm mm 0 pcs 0 pcs Bind Screw.6x.6x6.6x8.6x x x6 x8 x0 x x x6 x8 x0 x6 x8 x0 x x x5 x8 x0 x5 x8 x0 x Flat Head Screw.6x8.6x0.6x.6x x6 x8 x0 x x x6 x8 x0 x8 x0 x5 x0 x x x6 x8 x0 x x x5 Cap Screw x8 x0 x x.6x8.6x0.6x.6x x8 x0 x x x5 x6 x8 x0 x5 x0 x5 x0 x0 x5 x0 x5 x8 x0 x5 x0 x each each each each each each each each SCREW NUT etc x6.6x8.6x0.6x x6 x8 x0 x x x5 x6 x8 x0 x5 x0 x5 x6 x8 x0 x8 x0 x x8 x0 Bind Self-Tapping Screw.6x6.6x8.6x0.6x x6 x8 x0 x x x5 x6 x8 x0 x0 x5 x8 Flat Head Self-Tapping Screw 00 Flanged Cap Screw Screw Set Screw x6 x x x6 x x x5 x0 x x5 x8 x 5x 5x5 5x6 5x0 5x0 00 Nylon Nut mm mm mm 5 pcs 5 pcs 5 pcs Flanged Nylon Nut mm 5 pcs 00 each each 00 0 each 00 each each each each each 65 x0 x5 each E.5 E.0 E.5 E.0 E.0 E5.0 E6.0 E7.0 E0.0 Washer mm.6mm mm mm 5mm E E-Clips 0 each 0 each 50 0 pcs 0 pcs 0 pcs 0 pcs 0 pcs 0 pcs 0 pcs 6 pcs 6 pcs 5

36 00 KX-One 00 KYOSHO EXPLODED VIEW < > Parts indentified only by key numbers are not sold individually 6 7 A F F B A G E C D D E C G 96 5 KX05 KX06 6 KX KX0- KX0 KX0- KX0- KX0 - OT6VB 5 SP W0 8 LA 59 LA 70 LA 70 OTW 79 LA W0 8 LA 70 KX0 67 KX0 67 UM9 65 UM OTW 05 KX06 KX0 0 KX05 09 KX05 0 SPW0-V 6 SPW0-V 58 KX07 KX05 8 W KX08 7 KXW KX08 W56 - W UM 80 W56- W OT LA 70 SPW5 69 LA 70 KX KX SP0B 6 KX0 67 KX006 7 KX05-66 KX05 KX0 KX06 W KX06 9 KX00 KX00 KX0 KX07 KX07 SPW5BK 0 KX08 9 KX KY KX08 W60 08 KX005 5 W60 6 SP0 KX00 0 KX00 6 KX05 KX KX KX KX08 7 KX KX07 KX06 8 OT6VB 5 SPW0-V 6 KX06 SP0B 6 UM9 65 B KX0 KX KX KX06 KX06 8 KX009 KX008 7 UM KX KX007 KX009 5 WBD7 UM KX KXW0 95 W56- OT 9 7 UM9 8 UM KX00 5 KX UM 9 7 KX06 9 KX06 KX06 06 SP0B KX KX KX06 9 KX00 7 KX05 0 SP07V SP07V- 76 KX KXW UM 0 KX W KX UM W W /

37 R THE FINEST RADIO CONTROL MODELS TEL ( ) PRINTED IN JAPAN

P001.pdf

P001.pdf Before commencing assembly, please read these instructions thoroughly. WINGSPAN : 195mm R THE FINEST RADIO CONTROL MODELS EP CESSNA 180 TRAINER INSTRUCTION MANUAL RADIO CONTROLLED ELECTRIC POWERED AIRCRAFT

More information

Kyosho Pure Ten EP KX-One Manual

Kyosho Pure Ten EP KX-One Manual Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL RADIO CONTROLLED ELECTRIC POWERED TOURING CAR SERIES PureTen EP WD CHASSIS KIT

More information

32720_MR-03_JSCC_CUP

32720_MR-03_JSCC_CUP Before beginning assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R MINI-Z Racer MR-03 Chassis Set ASF.4GHz JSCC CUP Edition Thank you for purchasing the Chassis Set

More information

p01.pdf

p01.pdf RADIO CONTROLLED ELECTRIC POWERED WD RACING BUGGY INDEX SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. C KYOSHO 000 R REQUIRED FOR OPERATION () ch with electronic speed controller and servo radio

More information

P12_InstructionManual.pdf

P12_InstructionManual.pdf 1 BAG 1 CHASSIS PREPARATION OPEN BAG 1 1 SEAL THE EDGES OF GRAPHITE PARTS FOR PROTECTION SANDPAPER USE SANDPAPER TO SAND SMOOTH THE EDGES C20001 Rapide P12 2.5mm Graphite Main Chassis CA GLUe APPLY CA

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS ELECTRIC POWER EPVERSION INSTRUCTION MANUAL :0 SCALE RADIO CONTROLLED ELECTRIC POWER WD RACING BUGGY

More information

p01.pdf

p01.pdf Before use, please carefully read the explanations! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL LENGTH : 630mm (5") RADIO CONTROLLED ELECTRIC POWERED CRUISER INDEX REQUIRED FOR OPERATION BEFORE

More information

P001.pdf

P001.pdf Before commencing assembly, please read these instructions thoroughly! Radio Controlled. Engine Powered Touring Car Series THE FINEST RADIO CONTROL MODELS R INSTRUCTION MANUAL INDEX REQUIRED FOR OPERATION

More information

SPARE PARTS (2) FOR JAPANESE MARKET ONLY. No. Part Names No. Quantity No. Part Names No. Quantity

SPARE PARTS (2) FOR JAPANESE MARKET ONLY. No. Part Names No. Quantity No. Part Names No. Quantity SPARE PARTS (2) FOR JAPANESE MARKET ONLY. No. Part Names No. Quantity No. Part Names No. Quantity 37 W5015 Shock End 247 x 4 W5105BL 129 x 4 Shock Cap Set (Blue) W5106 Shock Plastic Parts 118 x 2 W5107

More information

p01.pdf

p01.pdf *Before beginning assembly, *please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL :8 Scale Radio Controlled Electric Powered WD Monster Truck TWIN FORCE INDEX

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS For Beginner & Intermediate Flyers INSTRUCTION MANUAL Wingspan: 1600mm (6.9") RADIO CONTROLLED.0

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly! THE FINEST RADIO CONTROL MODELS R INSTRUCTION MANUAL :8 Scale Radio Controlled. Engine Powered WD Racing Car EVOLVA 003 INDEX REQUIRED

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS Radio Controlled. Engine Powered Racing Car Series INSTRUCTION MANUAL INDEX REQUIRED FOR OPERATION

More information

内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H) HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE

内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H)  HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE B7FY-0351-02 J E J 1 J 1 2 3 2 4 J 3 4 Preface Thank you very much for purchasing the hard disk drive. This hard disk drive provides a IDE interface and can be installed in the 3.5-inch storage bay of

More information

Kyosho Fantom 2001 Manual

Kyosho Fantom 2001 Manual INSTRUCTION MANUAL Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS FANTOM 00 :8 Scale Radio Controlled. Engine Powered WD Racing Car INDEX REQUIRED

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly! V-ONE RR EVOLUTION CONVERSION KIT R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL No.39300 Symbols used throughout the instruction

More information

Kyosho Fantom Sports Manual

Kyosho Fantom Sports Manual Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS FANTOM SPORTS INSTRUCTION MANUAL :8 Scale Radio Controlled. Engine Powered WD Racing Car Series

More information

P001.pdf

P001.pdf Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS Size GP WD D AMG Mercedes CLK INDEX REQUIRED FOR OPERATION RADIO PREPARATION BEFORE YOU BEGIN ARRANGEMENT

More information

untitled

untitled OREC ISSUED NO. SP1000-1 Parts catalogue Spider Mower (EXPORT MODEL) SP1000 MODEL CODE SP1000 0202- CONTENTS HANDLE 1-8 DRIVING & CUTTING 9-12 CHAIN CASE 13 TRANSMISSION 14-22 GEAR FRAME 23 FRONT WHEEL

More information

Kyosho Super Ten GP FW-04 Manual

Kyosho Super Ten GP FW-04 Manual INSTRUCTION MANUAL Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS Size GP WD Radio Controlled.5 Engine Powered Touring Car Series SuperTen GP FW-0

More information

P001(FANTOM SPORTS).pdf

P001(FANTOM SPORTS).pdf Before commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS FANTOM SPORTS INSTRUCTION MANUAL :8 Scale Radio Controlled. Engine Powered WD Racing Car Series

More information

Kyosho Ultima GP ST Type-R Manual

Kyosho Ultima GP ST Type-R Manual Before commencing assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R GAS POWERED GPVERSION INSTRUCTION MANUAL :0 SCALE RADIO CONTROLLED.-.5 ENGIE POWER WD STADIUM TRUCK

More information

19403131 AFTER MARKET SERVICE CARD When purchasing Tamiya replacement parts, please take or send this form to your local Tamiya dealer so that the parts required can be correctly identified and supplied.

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL : 0 SCALE RADIO CONTROLLED.5 ENGINE POWERED WD RACING BUGGY INDEX This kit is

More information

P001(LANDMAX II)PEUGEOT.pdf

P001(LANDMAX II)PEUGEOT.pdf Before commencing assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R INSTRUCTION MANUAL Super Eight GP LANDMAX WD PEUGEOT 06 WRC INDEX REQUIRED FOR OPERATION RADIO PREPARATION

More information

Kyosho GP TR-15 Rally Manual

Kyosho GP TR-15 Rally Manual Before commencing assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL GP TR-5 RALLY WD MITSUBISHI LANCER EVOLUTION VII WRC INDEX This kit is half assembled.

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

ES8259取説

ES8259取説 ES8259 B B B B 2 µm µm C C C C µm µm 1 3 4 2 H H 3 C C C C C C C C C C C C C C C C C C C C C C C C C C C 4 B B B B B B B B B B B B 5 B B B C C B B C C B B B C B C B B B 6 7 8 OFF/ON $ & ( $ ' # % # $ %

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

P001.pdf

P001.pdf Before commencing assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R WINGSPAN: 930mm (36.6") For Intermediate & Advanced Flyers INSTRUCTION MANUAL RADIO CONTROLLED ELECTRIC

More information

LC304_manual.ai

LC304_manual.ai Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union

More information

No_ST012.indd

No_ST012.indd Pipe Threading Machine Supertronic INSTRUCTION MANUAL Double Insulation Important: For your safety and effective operation, read this Instruction Manual carefully and completely before use and thoroughly

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

P001.pdf

P001.pdf *Before beginning assembly, *please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL INDEX MAD FORCE RADIO CONTROLLED. ENGINE POWERED MONSTER TRUCK REQUIRED FOR

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly! THE FINEST RADIO CONTROL MODELS R INSTRUCTION MANUAL :0 SCALE RADIO CONTROLLED.-.5 ENGINE POWERED TOURING CAR SERIES CHASSIS KIT INDEX

More information

OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper

OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before operation.if there are any questions,please contact a Tohnichi

More information

00_20

00_20 KAWADA CATALOG 2004 Vol.11 www.kawadamodel.co.jp 1/10th scale TOURING CAR SV-10 SIGMA 1-2 kit, spare parts, option parts 1/10th scale TOURING CAR SV-10 ALCYON series 3 kit, spare parts, option parts 1/12th

More information

p01.pdf

p01.pdf *Before beginning assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R INSTRUCTION MANUAL RADIO CONTROLLED. ENGINE POWERED MONSTER TRUCK INDEX REQUIRED FOR OPERATION RADIO

More information

ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ

ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ class SCLE HELICOPTER SUPERCOR W-1W ODY KIT INSTRUCTION MNUL SUPERCOR Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive to SUPERCOR.

More information

ÉgÉEÉRÉuÉâï\éÜ

ÉgÉEÉRÉuÉâï\éÜ 60 class SCLE HELICOPTER TOWCOR H-1SIII ODY KIT INSTRUCTION MNUL TOWCOR 60 Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive

More information

TF6 面付p

TF6 面付p Before beginning assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL :0 Scale Radio Controlled Electric Powered WD Touring Car TF6 INDEX REQUIRED FOR

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

P3FY J E

P3FY J E P3FY-1490-01 J E J 1 J 1 2 2 J 3 3 4 4 5 J 5 Preface Thank you very much for purchasing the hard disk drive. This hard disk drive provides a IDE interface and can be installed in the 3.5-inch storage

More information

WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi

WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi ES-600P Operating Instructions WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing

More information

p01.pdf

p01.pdf *Before beginning assembly, *please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL GIGA CRUSHER DF (Dual Force) / SCALE RADIO CONTROLLED.6 X ENGINE POWERED MONSTER

More information

The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is es

The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is es The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is especially designed for operation of butterfly, plug

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL PureTen GP WD CHASSIS KIT :0 SCALE RADIO CONTROLLED.-.5 ENGINE POWERED TOURING

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se

More information

Anl_MonzaJAP.indd

Anl_MonzaJAP.indd ENGLISH A car racing game which encourages tactical thinking for 2 to 6 clever players ages 5 to 99. Author: Jürgen P. K. Grunau Illustrations: Haralds Klavinius Length of the game: 10-15 minutes approx.

More information

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly. R WINGSPAN: 116mm THE FINEST RADIO CONTROL MODELS For Intermediate & Advanced Flyers RADIO CONTROLLED ENGINE POWERED ALL-BALSA AIRCRAFT

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly. INSTRUCTION MANUAL R THE FINEST RADIO CONTROL MODELS INFERNO MP INDEX REQUIRED FOR OPERATION RADIO PREPARATION BEFORE YOU BEGIN ARRANGEMENT

More information

1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times t

1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times t 1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times the Dia, from the end of the rope. B A B point Position

More information

メタルバンドソー

メタルバンドソー Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

More information

P001.pdf

P001.pdf Before commencing assembly, please read these instructions thoroughly. R WINGSPAN : 600mm THE FINEST RADIO CONTROL MODELS For Intermediate & Advanced Flyers INSTRUCTION MANUAL RADIO CONTROLLED ELECTRIC

More information

OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper

OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before operation.if there are any questions,please contact a Tohnichi

More information

p01.pdf

p01.pdf Before beginning assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL II INFERNO MP-7. II YUICHI KANAI EDITION INDEX REQUIRED FOR OPERATION RADIO PREPARATION

More information

elemmay09.pub

elemmay09.pub Elementary Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Number Challenge Time:

More information

INSTRUCTION MANUAL WARNING Be sure to READ the Instruction Manual. Prior to using, be sure to check whether the machine functions properly. If not, NE

INSTRUCTION MANUAL WARNING Be sure to READ the Instruction Manual. Prior to using, be sure to check whether the machine functions properly. If not, NE INSTRUCTION MANUAL WARNING Be sure to READ the Instruction Manual. Prior to using, be sure to check whether the machine functions properly. If not, NEVER use it. NEVER apply your fingers to near the front

More information

03-03 Bush Mentori.pdf

03-03 Bush Mentori.pdf 54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1

More information

TK-M700…p†[…c…−…X…g

TK-M700…p†[…c…−…X…g TK Tape cutter device Machine models M700 Series / TK Series Parts Catalog INTRODUCTION This parts catalog covers the TK Series device. On pages 3-12, each mechanism is arranged on facing pages, the first

More information

UT(W1600).indd

UT(W1600).indd UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations

More information

W200テンプレート.indd

W200テンプレート.indd W200 Small Cylinder Bed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W200 series machine manufactured in January, 2003. The components of W200 series are arranged

More information

fx-9860G Manager PLUS_J

fx-9860G Manager PLUS_J fx-9860g J fx-9860g Manager PLUS http://edu.casio.jp k 1 k III 2 3 1. 2. 4 3. 4. 5 1. 2. 3. 4. 5. 1. 6 7 k 8 k 9 k 10 k 11 k k k 12 k k k 1 2 3 4 5 6 1 2 3 4 5 6 13 k 1 2 3 1 2 3 1 2 3 1 2 3 14 k a j.+-(),m1

More information

5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²

More information

429

429 WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly! WINGSPAN: 156mm R THE FINEST RADIO CONTROL MODELS For Intermediate & Advanced Flyers. INSTRUCTION MANUAL RADIO CONTROLLED ENGINE POWERED

More information

+ -

+ - i i C Matsushita Electric Industrial Co., Ltd.2001 -S F0901KK0 seconds ANTI-SKIP SYSTEM Portable CD player Operating Instructions -S + - + - 9 BATTERY CARRYING CASE K 3 - + 2 1 OP 2 + 3 - K K http://www.baj.or.jp

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL INFERNO MP-7. INDEX REQUIRED FOR OPERATION RADIO PREPARATION BEFORE YOU BEGIN

More information

P001(GP BLUE STREAK 800).pdf

P001(GP BLUE STREAK 800).pdf Before commencing assembly, please read these instructions thoroughly! R GPVERSION THE FINEST RADIO CONTROL MODELS LENGTH : 90mm INSTRUCTION MANUAL RADIO CONTROLLED.6 ENGINE POWERED RACING BOAT GP BLUESTREAK

More information

<45934B8D87955C B1D9CCA733816A2E786C73>

<45934B8D87955C B1D9CCA733816A2E786C73> 92001 On-Road Spring (Hard) 4955439738085 1284 Pillow Ball(5.8) 4955439654972 1710 Special Antenna Holder 4955439653845 1710V Special Antenna Holder II 4955439752456 1916 5x10 Bushing (=FD26) 4955439655450

More information

DZ-GX20/DZ-MV780取扱説明書(上巻)

DZ-GX20/DZ-MV780取扱説明書(上巻) DZ-GX20 DZ-MV780(S) DZ-MV780(R) DZ-MV780(A) Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use

More information

MFS 8A3 9.8A3 #026832XE OB NO.002-21051-4 0910 NB 3,400 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors. 2. Please keep the Parts List updated

More information

Bead Instructions First, locate the acupressure point you wish to stimulate. Next, remove a plastic bead from the bag. Remove the backing from the adh

Bead Instructions First, locate the acupressure point you wish to stimulate. Next, remove a plastic bead from the bag. Remove the backing from the adh icewave Instructions Bead Instructions First, locate the acupressure point you wish to stimulate. Next, remove a plastic bead from the bag. Remove the backing from the adhesive plastic patch included.

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly. R WINGSPAN: 1800mm THE FINEST RADIO CONTROL MODELS For Intermediate & Advanced flyers. INSTRUCTION MANUAL RADIO CONTROLLED ENGINE

More information

面付け

面付け 組立てる前にこの説明書を良くお読みになり十分に理解してください Before Begining assembly, please read these instructions thoroughly. R For Intermediate & Advanced Flyers WINGSPAN: 100mm (55.1") - SP 1300mm (51.") - ST 中 上級者向 組立 取扱説明書

More information

p01.pdf

p01.pdf efore commencing assembly, please read these instructions thoroughly! R THE FINEST RADIO CONTROL MODELS INSTRUCTION MANUAL REQUIRED FOR OPERATION TOOLS REQUIRED EFORE YOU EGIN 3 RADIO PREPARATION 3 ASSEMLY

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

Fig. 1 Schematic construction of a PWS vehicle Fig. 2 Main power circuit of an inverter system for two motors drive

Fig. 1 Schematic construction of a PWS vehicle Fig. 2 Main power circuit of an inverter system for two motors drive An Application of Multiple Induction Motor Control with a Single Inverter to an Unmanned Vehicle Propulsion Akira KUMAMOTO* and Yoshihisa HIRANE* This paper is concerned with a new scheme of independent

More information

MFS 2B 2.5B 3.5B OB NO NB 3,000

MFS 2B 2.5B 3.5B OB NO NB 3,000 MFS B.5B 3.5B OB NO.00-105-1 0910 NB 3,000 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors.. Please keep the Parts List updated each time when

More information

OPERATING INSTRUCTION QL QL5 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any quest

OPERATING INSTRUCTION QL QL5 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any quest OPERATING INSTRUCTION QL QL5 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any questions, please contact to Tohnichi authorized distributor

More information

M6B_8B_98B_body.indd

M6B_8B_98B_body.indd M 6B 8B 9.8B 1. 2. 3. 4. ' 5. 1) """" 6. No. No. 7. "" "" HOW TO USE THIS PARTS LIST 1. This Parts List lists the component parts of the Tohatsu outboard motors. 2. Please keep the Parts List updated

More information

p01.pdf

p01.pdf Before commencing assembly, please read these instructions thoroughly! WINGSPAN: 1375mm R THE FINEST RADIO CONTROL MODELS For Intermediate & Advanced Flyers. INSTRUCTION MANUAL RADIO CONTROLLED ENGINE

More information

Beginners' Coaching Notes 1

Beginners' Coaching Notes 1 Beginners' Coaching Notes 1 The Basic Idea of the Game 2 Single Ball Strokes 2.1 The Grip and Stance 2.2 Aim Stalking 2.3 Swing 3 Rushes 4 Hoop Running 5 Croquet Strokes 5.1 The Standard Drive 5.2 The

More information

On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new e

On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new e On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new electric wave projector is proposed in this paper. The

More information

2

2 8 23 26A800032A8000 31 37 42 51 2 3 23 37 10 11 51 4 26 7 28 7 8 7 9 8 5 6 7 9 8 17 7 7 7 37 10 13 12 23 21 21 8 53 8 8 8 8 1 2 3 17 11 51 51 18 23 29 69 30 39 22 22 22 22 21 56 8 9 12 53 12 56 43 35 27

More information

2

2 8 22 19A800022A8000 30 37 42 49 2 3 22 37 10 11 49 4 24 27 7 49 7 8 7 9 8 5 6 7 9 8 16 7 7 7 37 10 11 20 22 20 20 8 51 8 8 9 17 1 2 3 16 11 49 49 17 22 28 48 29 33 21 21 21 21 20 8 10 9 28 9 53 37 36 25

More information

;y ;y ;; yy ;y;; yy y;y;y;y ;y; ;; yy ; y Portable CD player Operating Instructions RQT5364-S

;y ;y ;; yy ;y;; yy y;y;y;y ;y; ;; yy ; y Portable CD player Operating Instructions RQT5364-S ;y ;y ;; yy ;y;; yy y;y;y;y ;y; ;; yy ; y Portable CD player Operating Instructions -S + - + - 1 3 K 2 - + H K Ni-Cd A.SHOCK S-XBS HOLD HOLD HOLD HOLD ( 1; 1; 6 VOLUME 5 4 1; A.SHOCK S-XBS RANDOM NOR

More information

DZ-HS503 取扱説明書

DZ-HS503 取扱説明書 DZ-HS503 Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended accessories only. CAUTION

More information

Huawei G6-L22 QSG-V100R001_02

Huawei  G6-L22 QSG-V100R001_02 G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/

More information

西川町広報誌NETWORKにしかわ2011年1月号

西川町広報誌NETWORKにしかわ2011年1月号 NETWORK 2011 1 No.657 平 成 四 年 四 の 開 校 に 向 け て 家 庭 教 育 を 考 え よ う! Every year around the winter holiday the Japanese custom of cleaning out your office space is performed. Everyone gets together and cleans

More information

Canofix_Manual_JP 1805

Canofix_Manual_JP 1805 Installation Manual Thank you for purchasing CANOFIX. Please give us a call or email if you have any questions regards toinstallation. (* canofixjapan@gmail.com *Required Tools Copyright 2015 Mr. Can All

More information

DZ-GX3300/GX3100/GX3100取扱説明書

DZ-GX3300/GX3100/GX3100取扱説明書 DZ-GX3300(S)/(B) DZ-GX3200 DZ-GX3100 Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended

More information

平成29年度英語力調査結果(中学3年生)の概要

平成29年度英語力調査結果(中学3年生)の概要 1 2 3 1 そう思う 2 どちらかといえば そう思う 3 どちらかといえば そう思わない 4 そう思わない 4 5 楽しめるようになりたい 6 1 そう思う 2 どちらかといえば そう思う 3 どちらかといえば そう思わない 4 そう思わない 7 1 そう思う 2 どちらかといえば そう思う 3 どちらかといえば そう思わない 4 そう思わない 8 1 そう思う 2 どちらかといえば そう思う

More information