No468_1609

Size: px
Start display at page:

Download "No468_1609"

Transcription

1 高能率荒加工用工具 No.468 新製品 NEW PRODUCT QM MAX GⅡ GMX / MXG 形 QM MAX GⅡ GMX / MXG type with high efficient roughing. 高能率 効果コスト削減 Achieved high efficient & economical machining!! 新チップ材種 New insert grade / チップ厚み 4mm 断面強度従来品比 20%UP!! Insert thickness: 4mm improved strength by.2 times compared with conventional tool. 焼入れ鋼 (50HRC 以下 ) 高強度ステンレス鋼には <> "" for high hardened steel less than 50HRC & high strength stainless steel. 一般鋼 プリハードン鋼 (35HRC 以下 ) には <> "" for general & mold steel less than 35HRC. チップ両面 4コーナ使用可能で経済的 Economical double-side insert (4 corners). 高剛性 High rigid ホルダラインナップ Lineup ボアタイプ Facemill φ50 φ66 モジュラータイプ Modular head φ6 φ42 抜群の切りくず排出量 3 Q=225cm /min (φ50 7 枚刃使用 炭素鋼加工時 )

2 マックスマスター QM MAX GⅡ GMX / MXG type 特 長 Features 抜群の切りくず排出量を実現! "QM MAX GⅡ" GMX / MXG type, indexable cutter with high efficient roughing. 高送り可能な刃先形状を採用した低抵抗形チップ 刃先形状の最適化により 刃先強度を保ちながら切りくず厚みを薄くかつ安定させ 刃当たりの送りUPが可能 ( 切込み深さap=mm 時 当社従来品ポジタイプ比切りくず厚み4% 低減 ) Low cutting force inserts with optimum cutting edge for high feed machining. Compared with conventional positive type cutter, chips thickness of QM MAX GⅡ reduced by 4% (in case of ap=mm). ネガチップ Negative insert 最適な刃先形状 Optimum cutting edge チップ厚み 4mm 断面強度は従来品比 20%UP と高剛性 Insert thickness: 4mm improved strength by.2 times compared with conventional tool. チップは両面使用可能で 4 コーナと経済的 Economical double-side insert (4 corners). チップ厚み 4mm Insert thickness: 4mm 両面使用可能! Double-side usable! チップ材種は新 PVD コーティング材種 <><> を採用 炭素鋼からプリハードン鋼 焼入れ鋼 高強度ステンレス鋼まで幅広い被削材に対応 2 insert grades & can be widely applied from general & mold steel to hardened die steel & high strength stainless steel. チップ材種適用領域 Application 使用分類記号 ISO 適用領域 Applicable range P 鋼 M ステンレス鋼 K 鋳鉄 H 高硬度材 P0 P0 P20 P30 P40 M0 M0 M20 M30 M40 K0 K0 K20 K30 H0 H0 H20 NEW NEW NEW NEW NEW NEW 焼入れ鋼 (50HRC 以下 ) 高強度ステンレス鋼には <> "" for high hardened steel less than 50HRC & high strength stainless steel. 一般鋼 プリハードン鋼 (35HRC 以下 ) には <> "" for general & mold steel less than 35HRC. 切削性能 Cutting performance 切削抵抗比較 Cutting force comparison 被削材 Mat l: S50C C50 切削条件 Cutting conditions: Vc=20m/min, fz=.0mm/t, ap=mm, ae=5mm ダウンカット Down cut エアブロー Air blow 工具形番 Tool No.: MXG-4025-M2 (φ25 4 枚刃 ) チップ形番 Insert No.:ENMU0042ZER-PM 切りくず比較 Shape of chips comparison 被削材 Mat l: S50C C50 切削条件 Cutting conditions:vc=20m/min, ae=5mm ダウンカット Down cut エアブロー Air blow 工具形番 Tool No.: MXG-4025-M2 (φ25 4 枚刃 ) チップ形番 Insert No.:ENMU0042ZER-PM 切削抵抗 (N) Cutting resistance,800,600,400,, 当社従来品 Conventional tool マックスマスター MXG 形 (φ25 4 枚刃 ) MXG type (φ25 4N) 約 6% Down! X( 送り分力 ) Feed force Y( 主分力 ) Main force Z( 背分力 ) Back force 合力 Resultant force fz=mm/t fz=.0mm/t fz=.5mm/t ap=mm ap=mm ap=.0mm 幅広い切削条件で安定した切りくずを生成 Stable chips can be formed under the wide range of cutting conditions.

3 高能率荒加工用カッタ Greatly improved metal removal rate! L/D=6 以上の長い突出しでも安定した高送り加工が可能 Possible to stable high feed machining in case of long overhung length over L/D=6. ランピングおよびヘリカル加工にも優れ 高能率なポケット加工が可能 Excellent in ramping and helical interpolation, and possible to high efficient pocket milling. カッタ径 φ25でランピング角 まで対応可能 ( 当社従来品ポジタイプと同等性能 ) Possible to Max. ramping angle in case of using φ25mm m tool dia. 耐熱性に優れた強靭性鋼 + 表面の GN 処理により 表面硬さ 65HRC 以上と高硬度かつ熱変形に強く高剛性で 本体耐久性および工具寿命を従来品比 30% 以上アップ 過酷な加工条件にも威力を発揮します さらに 切りくずの溶着 錆の発生を抑制する効果もあります Adopted GN surface-hardening treatment on thermal resistant high strength steel gives high hardness over 65HRC and secure insert pocket and holder against thermal deformation, improved body durability and tool life by 30% or more. Make it difficult to be damaged even under severe cutting conditions. Also rust-proof and anti-welding effect is much improved. 切削性能 Cutting performance 寿命比較 Tool life comparison 被削材 Mat l: 高強度ステンレス鋼 (SUS630) High strength stainless steel (.4542) 切削条件 Cutting conditions: Vc=20m/min, fz=mm/t, ap=mm, ae=5mm アップ & ダウンカット Up & down cut エアブロー Air blow 枚刃にて加工 Test by insert 工具形番 Tool No.: MXG-4025-M2 (φ25 4 枚刃 ) チップ形番 Insert No.:ENMU0042ZER-PM マックスマスターは 0m 加工でき正常摩耗 他社同等品と比較し大幅な寿命 UP を達成 After 0m, MXG type showed just normal wear. And achieved greatly longer tool life, compared with competitor s tools. 逃げ面摩耗量 Flank wear m チッピング Chipping 90m 摩耗大 Max. flank wear DIJET 0m 正常摩耗 Normal wear DIJET: ENMU0042ZER-PM () A 社 Competitor A B 社 Competitor B 切削長 (m) Cutting length 2

4 マックスマスター QM MAX GⅡ GMX / MXG type ボアタイプフライス Facemill type クーラント穴付き Through coolant hole φdb φd a.7 Lf b φd φdc R.2 Type Inch Bore Metric Bore Cat. No. GMX-7050R GMX-7063R GMX-7050R-22 GMX-7052R-22 GMX-7063R-22 GMX-7066R-22 GMX-7066R-27 Stock No. of inserts φ mmdimensions φ φ φ Applicable inserts ENMU0042 ZER-PM Parts Clamp screw TSW -2567H Wrench A-08 切削条件 Cutting conditions Clamp screw TSW-2567H Recommended torque 3 Standard stock itemssoon to be stockedsoon to be deleted

5 MXG マックスマスターモジュラーヘッド クーラント穴付き Through coolant hole Modular head MXG type W C MD φdc φdb R.2.7 Lf Cat. No. Stock No. of inserts φ mmdimensions φ Applicable inserts Parts Clamp screw Wrench MXG-206-M8 MXG-207-M8 MXG-3020-M0 MXG-302-M0 MXG-3025-M2 MXG-4025-M2 MXG-4026-M2 MXG-5030-M6 MXG-5032-M6 MXG-5035-M6 MXG-6040-M6 MXG-6042-M ENMU0042ZER-PM TSW-2567H A-08 アーバ Arbor 切削条件 Cutting conditions Clamp screw TSW-2567H Recommended torque MXG GMX 対応チップ Inserts B rε A T Cat. No. Tolerance PVD coated mmdimensions ENMU0042ZER-PM Standard stock itemssoon to be stockedsoon to be deleted 4

6 マックスマスター QM MAX GⅡ GMX / MXG type 5

7 Note) Please see page 0 for recommended tightening torque. 6

8 マックスマスター QM MAX GⅡ GMX / MXG type 7

9 8

10 マックスマスター QM MAX GⅡ GMX / MXG type 9

11 0

12 マックスマスター QM MAX GⅡ GMX / MXG type プログラム作成上のコーナ形状定義 Definition of corner shape for programming Remains Corner radius for programming Over Cut a Corner radius for programming Standard Over Cut Remains プロファイル加工時の注意事項 Ramping Attention for profile milling Helical interpolation φ Calculation of tool pass dia. φφφ a φ φ a Depth of cut per one circuit should not exceed max. depth of cut ap. Down cutting is recommended, so tool pass rotation should be counterclockwise. In case of ramping and helical interpolation, apply 70% or less feed speed from standard cutting condition table. In case of drilling, apply 50% or less Z axis feed speed from standard cutting condition table. Long consecutive chips may come out in case of drilling, confirm the safe condition sufficiently. Cat. No. MXG-206-M8 MXG-207-M8 MXG-3020-M0 MXG-302-M0 MXG-*025-M2 MXG-4026-M2 MXG-5030-M6 MXG-5032-M6 MXG-5035-M6 MXG-6040-M6 MXG-6042-M6 GMX-7050 GMX-7052 GMX-7063 GMX-7066 Tool dia. Eff. Cutting dia. Max. depth of cut Max. ramping angle Ramping mm Total cutting length at Max. ap Helical interpolation Min. bore dia. Dh min Max. bore dia. Dh max

13 標準切削条件 Recommended cutting conditions for GMX GMX type (facemill type) Work materials (S50C, S55C) Carbon steel (C50, C55) Below 250HB (SKD6, SKD) Die steel (.2344,.2379) Below 255HB (HPM7, PX5, P20) Mold steel (.23, P20) 30-36HRC (NAK80, HPM, P2) Mold steel (.23, P2) 38-43HRC (SKD6, DAC, DHA) Hardened die steel (.2344,.2379) 42-52HRC (FC, FCD) Grey & Nodular cast iron (GG, GGG) Below 300HB (SUS304) Stainless steel Below 250HB Grades () () () () Overhung length ap 0.2 ae Tool dia. 50 / / 66 No. of teeth7n n (min - ),020, ,020, ,020, ,50,50, Vf (mm/min) 8,570 8,570 7,480 6,970 6,970 8,570 8,570 7,480 6,970 6,970 8,570 8,570 7,480 6,970 6,970 4,60 4,60 3,20 3,020 2,690 4,60 4,60 3,20 2,080 2,080 0,70 9,980 7,980 5,320 5,320 4,480 4,480 3,580 ap 0.2 No. of teeth7n n (min - ) ae Vf (mm/min) 6,800 6,800 5,960 5,540 5,540 6,800 6,800 5,960 5,540 5,540 6,800 6,800 5,960 5,540 5,540 3,30 3,30 2,520 2,390 2,30 3,30 3,30 2,520 9,560 9,560 8,50 7,980 6,380 4,270 4,270 3,570 3,570 2,860 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. 2In case of chatter occurring, recommend to reduce the depth of cut ap or Spindle speed and keep feed per tooth. 3If machine does not have enough power, recommend to reduce the depth of cut ap or Spindle speed and Feed speed. 4Use air blow. 2

14 マックスマスター QM MAX GⅡ GMX / MXG type 標準切削条件 Recommended cutting conditions for MXG and MSN MXG and MSN type Work materials (S50C, S55C) Carbon steel (C50, C55) Below 250HB (SKD6, SKD) Die steel (.2344,.2379) Below 255HB (HPM7, PX5, P20) Mold steel (.23, P20) 30-36HRC (NAK80, HPM, P2) Mold steel (.23, P2) 38-43HRC (SKD6, DAC, DHA) Hardened die steel (.2344,.2379) 42-52HRC (FC, FCD) Grey & Nodular cast iron (GG, GGG) Below 300HB (SUS304) Stainless steel Below 250HB Grades () () () () Tool dia. 6 / 7 20 / 2 25 No. of teeth No. of teeth No. of teeth ap ae n (min - ) V f (mm/min) 3,580 8,590 3,580 8,590 3,80 7,630 3,580 8,590 3,580 8,590 3,80 7,630 3,80 7,630 3,80 7,630 2,590 6,220,890 4,60,690 3,040,590 2,860,890 4,60,690 3,040,590 2,860 3,980,940 3,980,940 3,580 8,590 2,390 4,780 2,390 4,780,990 3, ap ae n (min - ) V f (mm/min) 2,860 2,860 2,550 2,860 2,860 2,550 2,550 2,550 2,070,50,350,270,50,350,270 3,80 3,80 2,860,90,90,590 0,300 0,300 9,80 0,300 0,300 9,80 9,80 9,80 7,450 4,980 3,650 3,430 4,980 3,650 3,430 4,30 4,30 0,300 5,730 5,730 3, ap ae n (min - ) 2,040 2,040 2,040 2,040,660,20,080,020,20,080,020 2,550 2,550,530,530,270 V f (mm/min) 8,240 8,240 7,340 8,240 8,240 7,340 7,340 7,340 5,980 3,990 2,920 2,750 3,990 2,920 2,750,480,480 8,240 4,590 4,590 3,050 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. 2In case of chatter occurring, recommend to reduce the depth of cut ap or Spindle speed and keep feed per tooth. 3If machine does not have enough power, recommend to reduce the depth of cut ap or Spindle speed and Feed speed. 4Use air blow. 3

15 標準切削条件 Recommended cutting conditions for MXG and MSN MXG and MSN type Work materials (S50C, S55C) Carbon steel (C50, C55) Below 250HB (SKD6, SKD) Die steel (.2344,.2379) Below 255HB (HPM7, PX5, P20) Mold steel (.23, P20) 30-36HRC (NAK80, HPM, P2) Mold steel (.23, P2) 38-43HRC (SKD6, DAC, DHA) Hardened die steel (.2344,.2379) 42-52HRC (FC, FCD) Grey & Nodular cast iron (GG, GGG) Below 300HB (SUS304) Stainless steel Below 250HB Grades () () () () Tool dia. 25 / / 32 / 35 No. of teeth No. of teeth ap ae n (min - ) V f (mm/min) 2,040 2,040 2,040 2,040,660,20,080,020,20,080,020 2,550 2,550,530,530,270 0,990 0,990 9,790 0,990 0,990 9,790 9,790 9,790 7,970 5,320 3,890 3,670 5,320 3,890 3,670 5,300 5,300 0,990 6,20 6,20 4, ap ae n (min - ) V f (mm/min),90,90,700,90,90,700,700,700,380, , ,20 2,20,90,270,270,060,460,460 0,,460,460 0, 0, 0, 8,280 5,560 4,050 3,830 5,560 4,050 3,830 5,900 5,900,460 6,350 6,350 4, / 42 No. of teeth ap ae n (min - ) V f (mm/min),430 0,300,430 0,300,270 9,40,430 0,300,430 0,300,270 9,40,270 9,40,270 9,40,030 7, , , , , , ,460,590 4,30,590 4,30,430 0, , , ,840 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. 2In case of chatter occurring, recommend to reduce the depth of cut ap or Spindle speed and keep feed per tooth. 3If machine does not have enough power, recommend to reduce the depth of cut ap or Spindle speed and Feed speed. 4Use air blow. 4

16 60960TS.A2

No472_1610

No472_1610 高能率荒加工用工具 No.472 新製品 NEW PRODUCT EXTREME DIEMATE ボアタイプ φ50 φ モジュラータイプ φ32 φ40 EXTDM / MTX 形 チップ両面仕様 難削材対応 ラジアスカッタ Indexable radius cutter for hard-to-cut material with double-side insert. タービンブレード加工に最適!

More information

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT PRODUCT NEWS No. 0 NEW PRODUCT SSE series 0 SSD0 SSE JCTMA ECO PRODUCT SSD0 0 JCTMA ECO PRODUCT series SSE, SSD0 Dijet-mill SSE type SSE For general use and face milling Features SSE gives wide application

More information

No483_1710

No483_1710 PRODUCT NEWS No. 483 NEW NEW PRODUCT for high feed machining with 4corners. SKG/MSG SKS-G SKG / MSG type, innovative high feed cutter achieved extremely excellent chip removal rate! SKS-G SKS-G Feature

More information

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong

More information

アクアEXオイルホールロング(CC2015).indd

アクアEXオイルホールロング(CC2015).indd High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge

More information

BNM

BNM Features and benefits 1. Ultimate precision indexable ball nose endmill with two effective teeth Radius form accuracy : below m (Radius form accuracy of insert : below m) 2. Precision clamp screw mounting

More information

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach

More information

No474kai_1802

No474kai_1802 刃先交換式ドリル 座ぐり加工用 No.474 改 新製品 NEW PRODUCT 先端角 1 フラット φ14 φ (1.5Dタイプ) Indexable spot facing drill with point angle of 1 (flat face). Size range: φ14- φmm dia. (Drilling depth: 1.5D) Indexable Spot facing

More information

DIJET - Carbide Holders.pdf

DIJET - Carbide Holders.pdf PRODUCT NEWS No. 07 B FU INEUP Fits all major manufacturers Straight Neck type 5 Items Taper Neck type Items Staight Arbor type Items Different type carbide shank holder from M to M bore diameters with

More information

mirror1604

mirror1604 PRODUCT NEWS No.5 SERIES EXPANSION BNM typebnm-c type RNM typernm-c type MBN typembn-h type / MRN typemrn-h type MIRROR BALL MIRROR RADIUS MIRROR BALL BNM BNM-C MIRROR BALL carbide shank series are possible

More information

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 OSG-WALTER Vol. 5 F3000 Series F3010 P3F90R NEW WAK25 F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 2 INSERT SIZE & APPLICABLE CUTER INSERTS APPLICATION CHART Inserts Application Chart Product

More information

SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing pr

SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing pr PRODUCT NEWS 刃先交換式ボールエンドミル No. 9 新製品 スウィングボール ネオ SWBX/MSWX形 NEW PRODUCT 曲面加工 肩削り コーナR 溝削り コーナR シャンクタイプ モジュラータイプ φ φ0 SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and

More information

SGドリルシリーズ_CC2015.indd

SGドリルシリーズ_CC2015.indd SG Drill Series High performance PMHSS Drills High performance PMHSS Drills Powder HSS with SG Coating and the tool life is 2 times of conventional coated drills. Extremely precise positioning and Stable

More information

メタルバンドソー

メタルバンドソー Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

More information

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

PRODUCT NEWS No. 397 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB

PRODUCT NEWS No. 397 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB PRODUCT NEWS No. 7 SERIES EXPANSION Swing Ball Indexable Ball Nose End Mill series SWB SWB Swing Ball series SWB/SWE Indexable Ball Nose End Mill SWB TYPE Features The most suitable inserts from raw material

More information

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing AERO End Mill High Speed Carbide End Mills for Aluminum Alloys Vol.4! New cutting data on specials! LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute,

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

アクアドリルEX改定.indd

アクアドリルEX改定.indd AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD AQDEXOHD AQDEXOHD AQDEXZ Delivering high-performance consistently in a wide range from moderate-low to high speeds AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD

More information

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a SG Drill Series High performance PM-HSS Drills High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning and Stable

More information

No488_1804

No488_1804 PRODUCT S No. 488 SERIES EXPANSION Spot facing drill Spot facing drill with point angle of 180 (flat face). Size range: 1-14mm dia. JCTMA 2015-018 ECO PRODUCT Flat Face Application Spot facing slope Spot

More information

MRBTNH230

MRBTNH230 高硬度材への深彫り加工で真価を発揮する Show its higher ability by deep milling for high hard materials. 無限コーティングプレミアム ロングテーパーネック 2 枚刃ボールエンドミル MRBTNH230 MUGEN-COATING PREMIUM 2-Flute Long Taper Neck Ball End Mill 最適化したテーパーネック形状

More information

No499_1810

No499_1810 No.499 シリーズ拡張 SERIES EXPANSION フェースミルタイプ HEPTA MILL facemi type HEP-FM 形 φ0~φ200 Size rage: 0-200 mm dia. 高切込み高送りが可能 刃先強度に優れ経済的な 7 角形インサート採用 ボアタイプフライス Facemi type 近日発売 COMING SOON Fig.1 b φdb φd a Lf Fig.2

More information

タップ総合

タップ総合 1 2 3 4 N NEW タップシリーズ N Tap series ねじ加工に適した高バナジウムハイスの使用により 汎用タップながらも長寿命 高剛性設計で安定ねじ加工を実現 Nスパイラルタップ NSP By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads

More information

H1-H4.ai

H1-H4.ai PRODUCT NEWS No. 44 FU INEUP NEW TA-EZ TEZD "Indexable EZ DRI" TEZD type JCTMA 213-6 ECO PRODUCT 超硬工具協会 (JCTMA) 環境認定製品です "Indexable EZ DRI" achieved easy assembly and high cutting performance. Indexable

More information

ALシリーズ.indd

ALシリーズ.indd アルミ専用エンドミル 倍刃長タイプ AD- AD- NS の A シリーズは あらゆる条件で安定した高能率加工を実現 コストパフォーマンスに優れた高剛性 倍刃長タイプ NS の A シリーズは あらゆる条件で安定した高能率加工を実現 幅広い領域で安定した加工面精度が得られ 高速加工でもビビリを抑制 A-series realized a stable and high efficient machining.

More information

TURNING INERT NEW RODUCT 2014 ocket Guide

TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 ocket Guide TURNING INERT NEW RODUCT 2014 3 7 11 13 15 18 20 24 26 28 30 34 38 40 44 45 47 3 ocket Guide 2014 ocket Guide 2014 4

More information

H1-H4

H1-H4 No.489 Plunging Tools SEC-PDL/ SEC - SEC-Plunge Drill PDL Type/ SEC-Plunge Mill Type Having an edge in pocketing and deep contour milling! Lineup of 10 items each from the PDL type / type! Achieving stable

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

Features Features FeaturesThread milling cutters 1

Features Features FeaturesThread milling cutters 1 Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons

More information

KOMET KUB K2® 小径対応ヘッド交換式ドリル

KOMET KUB K2® 小径対応ヘッド交換式ドリル KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also

More information

Thread Milling Cutter Series

Thread Milling Cutter Series Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials

More information

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools for high-rate machining of steels, prototype cutters

More information

リーマレス加工にこだわった高精度 高能率 3 フルート High precision and high efficiency 3 Flutes is particular about no reaming AQUA Drills EX 3Flutes EX3 AQDEXOH3F AQDEX3FR レ

リーマレス加工にこだわった高精度 高能率 3 フルート High precision and high efficiency 3 Flutes is particular about no reaming AQUA Drills EX 3Flutes EX3 AQDEXOH3F AQDEX3FR レ リーマレス加工にこだわった高精度 高能率 3 フルート High precision and high efficiency 3 Flutes is particular about no reaming EX3 AQUA Drills EX 3Flutes AQDEXOH3F AQDEX3FR レギュラ 5D 用 AQDEX3FH ハード高硬度材用 3D 5D 10D オイルホール 3 タイプ リーマレス加工にこだわった高精度

More information

5 Fiute Highly Efficient Radius End Mills

5 Fiute Highly Efficient Radius End Mills 形状の特長 Features から (55HRC) まで幅広い被削材に対応! 不等分割 不等リード形状 ポジティブすくい角刃形状により 側面加工で高能率加工が可能! シームレスコーナ R 形状により 切削抵抗を飛躍的に低減! Broad plication range from Carbon Steels to Hardened Steels (55HRC). Variable pitch, variable

More information

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i 内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining

More information

R.10 2 面拘束 +10 (.R.) 切削力 主切れ刃 2,000 fz = 0.2 mm/t 切削抵抗 (N) 1,600 1, % DOWN fz = 0.3 mm/t B Vc = 1 m/min, fz = mm/t,

R.10 2 面拘束 +10 (.R.) 切削力 主切れ刃 2,000 fz = 0.2 mm/t 切削抵抗 (N) 1,600 1, % DOWN fz = 0.3 mm/t B Vc = 1 m/min, fz = mm/t, 1045 10 45 10 1045 10 1 10 2 5.R.10 2 面拘束 +10 (.R.) 切削力 主切れ刃 2,000 fz = 0.2 mm/t 切削抵抗 (N) 1,600 1,200 800 16% DOWN fz = 0.3 mm/t B Vc = 1 m/min, fz = 0.2-0.3 mm/t, ap ae = 3 110 mm C 400 0 主分力送り分力背分力 GM

More information

00_1512_SLIMLINE_BOOK.indb

00_1512_SLIMLINE_BOOK.indb PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity

More information

ドリルドリVP-GOLD RECOMMENDED DRILLING CONDITIONS VP- ゴールドドリル切削条件基準表 低 軟鋼 Low SCM SCr Special Hardened Steel 28HRC 28 34HRC N/ mm 2 Cutting 38 50m/

ドリルドリVP-GOLD RECOMMENDED DRILLING CONDITIONS VP- ゴールドドリル切削条件基準表 低 軟鋼 Low SCM SCr Special Hardened Steel 28HRC 28 34HRC N/ mm 2 Cutting 38 50m/ 切RECOMMENDED ドリル-VP- ゴールドドリル切削条件基準表 VP-GOLD RECOMMENDED DRILLING CONDITIONS VPH-GDS VP-GOLD VゴールドドリルP Cutting 34 43HRC 1060 1400N/ mm 2 調質鋼 Hardened Steel 特殊鋼 Special 43 48HRC 1400 1600N/ mm2 48 53HRC

More information

No461_7_p1-6.indd

No461_7_p1-6.indd 461 igh-speed, igh-efficiency Cutter Dedicated to on-ferrous etal EC-Wavemill WAX3000/4000 Type A full lineup of cutter models with diameters ranging WAX4000/4000E/EL Type from 25 to 125 mm Characteristics

More information

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed

More information

Technology Features of ABPF type New product: -flute ball end mill ( to ) compatible with machines ranging from general-purpose manufacturing machines

Technology Features of ABPF type New product: -flute ball end mill ( to ) compatible with machines ranging from general-purpose manufacturing machines New Product News No.6- Planing Side Cutting Profiling adius 5- Applications Pat. No. 5666 Can be chosen from three kind of grade according to the work material. The efficiency improve in finishing process.the

More information

AME type Roughing End Mill AME New Product News No

AME type Roughing End Mill AME New Product News No AME type Roughing End Mill AME New Product News No.1212-3 2019-4 New variations of coating, introducing AJ coating series. Nicked inserts enable suppression of chattering in heavy milling! Cutting Applications

More information

Tungsten Carbide End Mills UNIMAX Series

Tungsten Carbide End Mills UNIMAX Series 2 ( の順に推奨) SS40 S45C S55C SK SCM SUS 30~45 HRC NAK HPM ~55 HRC HRC ~60 HRC ~70 鉄鋼材加工用 C-CES2000 2 枚刃スクエア 18 30 φ0.1~φ20 コスト重視 加工面重視のマルチプレイヤー C-CES4000 4 枚刃スクエア 32 30 φ1~φ20 コスト重視 加工面重視のマルチプレイヤー 高能率加工用

More information

高送り加工の切削抵抗低減とコスト低減に新提案 New proposal to reduce cost and cutting force during high-feed-rate processing シャンク径逃げタイプを追加しました Shank diameter runout type add

高送り加工の切削抵抗低減とコスト低減に新提案 New proposal to reduce cost and cutting force during high-feed-rate processing シャンク径逃げタイプを追加しました Shank diameter runout type add ASRF mini type アルファ ASRF mini 形 Super Radius Mill Four Corners ASRF mini 高送りラジアスミル 4 コーナ Super Radius Mill Four Corners New Product News No.1501-5 2017-10 高送り加工の切削抵抗低減とコスト低減に新提案 New proposal to reduce

More information

4 90 MEW 4 90 MEW 4 MEWH NEW DLC PDL025

4 90 MEW 4 90 MEW 4 MEWH NEW DLC PDL025 9 MEW 9 MEW MEWH NEW DLC PDL5 9 MEW DLC PDL5 1 ー () A.R. Max.+ (15 タイプ ), 1, 17% 1% 切削抵抗 (N) 1, 1, 1, 9% DOWN % 9% 1, 他社品 A ( ネガ ) 他社品 B ( ネガ ) MEW GM ブレーカ 他社品 C ( ポジ ) Vc = 15 m/min, fz =.15 mm/t, ap

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

Nachi - AQDEX

Nachi - AQDEX The next generation solid carbide drill Series Series AQDEX AQDEXR AQDEXOH3D AQDEXOH5D AQDEXOH8D 3D 5D Realize stable, high efficiency drilling in wide area, from medium and low speed up to high speed

More information

No440_11_p1-6.indd

No440_11_p1-6.indd No.440 New general purpose indexable milling cutter WaveMill WGC type Introducing new coated series grades ACP & ACK Achieved world class performance and accuracy! High quality machining due to a high

More information

Thread Mill Series

Thread Mill Series Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank

More information

スモールツール Small Tools 3次元シャープエッジブレーカシリーズ Molded sharp edge chipbreakers Series 自動盤用 3次元シャープエッジブレーカシリーズ 3D Sharp Edge Chipbreaker Series for Automatic La

スモールツール Small Tools 3次元シャープエッジブレーカシリーズ Molded sharp edge chipbreakers Series 自動盤用 3次元シャープエッジブレーカシリーズ 3D Sharp Edge Chipbreaker Series for Automatic La スモールツール Small Tools 次元シャープエッジシリーズ Molded sharp edge chipbreakers Series 自動盤用 次元シャープエッジシリーズ D Sharp Edge Chipbreaker Series for Automatic Lathe 切りくず処理の悩みを解決する充実のレパートリー シリーズとの組み合わせで長寿命加工が可能 Extensive product

More information

製品カタログ コロミル745

製品カタログ コロミル745 森一産業ホームページ掲載商品の資料をご覧頂き ありがとうございます ご不明の点などございましたら お気軽に電話 メールなどでお問い合わせ下さい 問い合わせ先 : 電話 041221( 大阪 ) 0221181( 新潟 ) :FX 0412302( 大阪 ) 0221140( 新潟 ) :EMIL info@mori1.net なお 検索等で直接 このページをご覧になって頂いている方は もしよろしければ弊社ホームページを一度ご訪問いただきたく存じます

More information

NEW NACHI の技術を結集した 新しいジャンルの革新タップ誕生 材料から熱処理 研削技術 表面処理まで NACHI のもつ歯切工具やブローチのシーズ技術を応用 加工メカニズムと摩耗解析による最適設計で 寿命バラツキの少ない安定加工を実現 低速 ~ 中速領域で高性能を発揮し 無処理タップの 2~

NEW NACHI の技術を結集した 新しいジャンルの革新タップ誕生 材料から熱処理 研削技術 表面処理まで NACHI のもつ歯切工具やブローチのシーズ技術を応用 加工メカニズムと摩耗解析による最適設計で 寿命バラツキの少ない安定加工を実現 低速 ~ 中速領域で高性能を発揮し 無処理タップの 2~ 217 Vol.3 NEW NACHI の技術を結集した 新しいジャンルの革新タップ誕生 材料から熱処理 研削技術 表面処理まで NACHI のもつ歯切工具やブローチのシーズ技術を応用 加工メカニズムと摩耗解析による最適設計で 寿命バラツキの少ない安定加工を実現 低速 ~ 中速領域で高性能を発揮し 無処理タップの 2~3 倍の長寿命 コーティングタップをも凌駕する長寿命 New style of innovative

More information

_H1-H4_1011

_H1-H4_1011 Headquarters 2-1-18, Kami-Higashi, Hirao-ku, Osaka 547-0002, Ja Phoe: 81-6-6791-6781 Fax: 81-6-6793-1221 PRODUCT NEWS No. 497 NEW PRODUCT NEW for high efficiet shoulder millig. EXSAP/MSX DIJET GmbH (Europe)

More information

UNIMAX SERIES VOL18

UNIMAX SERIES VOL18 長4 枚刃 UTCOAT サイズ φ1~φ20 CZS 対応表 ( の順に推奨 ) 炭素鋼 S45C S55C 合金鋼 SK / SCM SUS プリハードン鋼 NAK HPM 焼入れ鋼 ~ 55HRC ~ 60HRC ~ 70HRC 鋳鉄アルミ合金グラファイト銅樹脂ガラス入り樹脂チタン合金超耐熱合金超硬合金硬脆材 新開発の底刃形状により ムクのワークに Z 切込みが出来ます 欠けにくい高靱性超硬材料を採用

More information

高硬度金型(60HRC) の高速切削

高硬度金型(60HRC) の高速切削 High-Speed Cutting of Hardened (60HRC) Die Mold Kunio Naito, Kazutaka Ogo, Yasuhisa Takada, Kazuki Watanabe, Kenji Wada 40HRC60HRC 60HRC CBN Hardened die mold steels have been conventionally As a result

More information

銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Coppe

銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Coppe 銅電極の加工に圧倒的な長寿命と高品位を実現する銅電極加工用ロングネックボールエンドミル DRB230 Realize long life and high quality in machining copper electrode. Long Neck Ball End Mill for Copper Electrode - DRB230. バリを最小限に抑えた高精度な加工を可能にするシャープな刃形状!

More information

botek_8p.indd

botek_8p.indd DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS Throw away type Deep hole drilling tools botek Type 01, 07, 07A Sole Agent MURAKI LTD. (MACHINE & TOOL DIVISION) Tokyo, Osaka, Nagoya & Fukuoka Type 01 Type

More information

AFE45 type アルファ正面フライス AFE45 形 Face Mill AFE45 type New Product News No

AFE45 type アルファ正面フライス AFE45 形 Face Mill AFE45 type New Product News No AFE45 type アルファ正面フライス AFE45 形 Face Mill AFE45 type New Product News No.1215-3 219-4 ユニークな超硬シートの逃げ面形状により低切削抵抗の刃形を実現鋳鉄 一般鋼 焼入れ鋼 アルミから難削材まで加工可能! Low cutting force geometry is realized, due to unique sheet

More information

止まり穴ソリッド加工 (Type01000 Type01010) 貫通穴ソリッド加工 (Type01000 Type01010) OK OK OK 止まり穴カウンター加工 (Type01000 Type01010) NG 貫通穴カウンター加工 (Type01000 Type01010) クロスホール

止まり穴ソリッド加工 (Type01000 Type01010) 貫通穴ソリッド加工 (Type01000 Type01010) OK OK OK 止まり穴カウンター加工 (Type01000 Type01010) NG 貫通穴カウンター加工 (Type01000 Type01010) クロスホール Type01 スローアウェイタイプ Type Type01001 2 12.0017.99 1 2 0.9mm Type01000 2 18.00.99 2 2 0.9mm Type01011 Type01010 12.0017.99 18.00.99 1 2 2 2 0.9mm 0.9mm * 2 12.0017.99 21 K10K0 SP1SP91SP BBXBB 1 1.017.99 11

More information

AS Roughing Finishing. aximum Notch. aximum Notch ill dia. tolerance for the master insert. Planing Side Cutting Slotting Die-sinking Profiling Helica

AS Roughing Finishing. aximum Notch. aximum Notch ill dia. tolerance for the master insert. Planing Side Cutting Slotting Die-sinking Profiling Helica No.9- AS形 Super Excellent INI AS Type 特許申請中 Small tool diameter, ter ol To d Ultra-high efficiency 8 φ c D 径 e iam 外 Patent Pending mm φ φ φ φ φ φ6 φ7 9年 超モノづくり部品大賞 機械部品賞 受賞 9年度 日本工具工業会 JP 環境貢献賞 受賞 AS

More information

S 字の切れ味! 強ねじれ刃形による美しい加工面コーナでもびびりにくい高精度加工用インサート High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful cutting s

S 字の切れ味! 強ねじれ刃形による美しい加工面コーナでもびびりにくい高精度加工用インサート High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful cutting s 仕上加工用刃先交換式ボールエンドミル Indexable ball end mill for finishing ABPFN type アルファボールプレシジョン F ABPFN 形 Ball Precision F ABPFN type New Product News No.1606-1 2017-6 S 字の切れ味! 強ねじれ刃形による美しい加工面コーナでもびびりにくい高精度加工用インサート

More information

レパートリー拡大 Product Lineup Expansion for Small Double Sided Tooling 仕上げ 中切削用 SK ブレーカ登場! New! SK chipbreaker for finishing to middle cutting 10 角シャンク追加! 1

レパートリー拡大 Product Lineup Expansion for Small Double Sided Tooling 仕上げ 中切削用 SK ブレーカ登場! New! SK chipbreaker for finishing to middle cutting 10 角シャンク追加! 1 自動盤用 スモールネガ Small Double Sided Tooling 新設計ネガチップ採用により コーナ数が 2 倍で高い経済性と安定性を発揮 New negative insert enables high cost efficiency and stability with double-faced design 従来ポジチップに匹敵する切れ味を実現 Sharpness even equal

More information

WXLコーティング新登場!! 3枚刃超硬面取りカッタ arbide 3-flute hamfering utter WXL oated Now Available arbide hamfering utter 独自の3刃仕様 arbide Series with TiAIN oating W-HST

WXLコーティング新登場!! 3枚刃超硬面取りカッタ arbide 3-flute hamfering utter WXL oated Now Available arbide hamfering utter 独自の3刃仕様 arbide Series with TiAIN oating W-HST A wide variety of products is available so you can choose the ideal tools for your applications! WXL WXL oating Now Available!! LS-HST-P HST-P V-US WLS-HST-P W-HST-P FX-MG-S A line-up expanded! No more

More information

テクノロジー Technology JM460 ステンレス鋼 Stainless steel 炭素鋼合金鋼 Carbon steel Alloy steel JS4045 GX240 プリハードン鋼焼入れ鋼 30~45HRC Pre-hardened steel Hardened steel 30

テクノロジー Technology JM460 ステンレス鋼 Stainless steel 炭素鋼合金鋼 Carbon steel Alloy steel JS4045 GX240 プリハードン鋼焼入れ鋼 30~45HRC Pre-hardened steel Hardened steel 30 高送りラジアスミル Super Radius Mill type アルファ 高送りラジアスミル 形 Super Radius Mill type N e w P ro d u c t N e w s No.604-4 207-0 テクノロジー Technology JM460 ステンレス鋼 Stainless steel 炭素鋼合金鋼 Carbon steel Alloy steel JS4045

More information

超 硬 防 振 型 エンドミル AE-VMS シリーズ Vol.8 Anti-Vibration Carbide End Mill AE-VMSS AE-VMS AE-VML ロング刃長 チップブレーカタイプ追加 New long chipbreaker end mill

超 硬 防 振 型 エンドミル AE-VMS シリーズ Vol.8 Anti-Vibration Carbide End Mill AE-VMSS AE-VMS AE-VML ロング刃長 チップブレーカタイプ追加 New long chipbreaker end mill 超 硬 防 振 型 エンドミル AE-VMS シリーズ Vol.8 Anti-Vibration Carbide End Mill AE-VMSS AE-VMS AE-VML ロング刃長 チップブレーカタイプ追加 New long chipbreaker end mill INDEX 新たなミーリングスタンダード The New Standard for Milling スタブ形 ショート形 Stub

More information

No473_13.indd

No473_13.indd ニュース No.473 優れた切りくず排出性と安定長寿命を実現 Excellent Chip Evacuation and Stable and Long Tool Life スーパーマルチドリル GS 型 /HGS 型 /WGS 型 SUPER MULTIRILL GS series / HGS series / WGS series 第 13 版 2009-015 series series EX-Coating

More information

Aerospace Solutions

Aerospace Solutions Aerospace Solutions INDEX Assembly 2 Type 3 CFRP 4 CFRP/AL Stack 5 CFRP/TI Stack 6 Special Assembly s 7 Structure 8 Aluminum Parts 9 CFRP Parts 11 Titanium Parts 13 Honeycomb Parts 17 Engine 18 Drilling

More information

アクアドリルシリーズ

アクアドリルシリーズ AQUA Drill Series EX Standard of high efficiency drilling and highly accurate drilling AQUA drill EX, enter the stage Realize high speed/high efficiency drilling with new flutes geometry and AQUA coating,

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

Tooling by DIJET ミーリング&ドリリング編 Vol.6

Tooling by DIJET ミーリング&ドリリング編 Vol.6 69 Dc Lf d d a b R Db SKS-06RS-0 SKS-00RS-0 SKS-RS-0 SKS-RS-0 SKS-6RS-0 SKS-06RS-0- SKS-00RS-0-7 SKS-RS-0- SKS-RS-0-0 SKS-6RS-0-0 kg Fig. 7 6 6 7 7 7 6 0 6 0 6 6 0 6. 7 9 9..7.7.9 9 0... 6. 6. 0 70 70

More information

CBN.indd

CBN.indd CBN エンドミルシリーズ CBN End Mill Series 高硬度材の長時間仕上げ加工に最適! Suitable for long finishing operation in hardened steels CBN エンドミルシリーズ CBN End Mill Series 工具素材にダイヤモンドに次ぐ硬さをもつ CBN 焼結体を採用したエンドミル高硬度で耐熱性のある CBN 焼結体の特性を活かすユニークな工具形状高硬度材の仕上げ加工時に長寿命で安定した仕上げ面が得られます!

More information

455-omote+

455-omote+ No.455 For steel industry and eavy industry Inserts and Holders or eavy duty turning SNMM Type inserts wit N and N cip reakers or Rouging RCMT Type inserts wit N Type cip reaker or cip control New coating

More information

SM-CP-2019

SM-CP-2019 2019 2019930 CONTENTS App StoreGoogle PlayCOCOAR2 QR 2019 A A-1 GMX/MXG 4 A-2 EXTDM/MTX 7 10 A 15 DIJET SUMMER CAMPAIGN 2019 01 2019 B B-1 BNM/MBX B-2 TSBNM-TS TS BNM-TS TS SR0.006 12 B 15 02 DIJET SUMMER

More information

02-03 HSK-AEFC.indb

02-03 HSK-AEFC.indb H S K 267 CTSA New Super tite-lock Milling Chuck Slim design milling chuck. Specially designed slits enables heavy endmilling. Multibore tool system 5690 13416075 HSK40A -CT16SA - 75 1 2 16 45 75 50 26

More information

超硬エンドミル ユニマックスシリーズ UTCOAT 4枚刃高能率縦横送り 部品加工用スクエアエンドミル

超硬エンドミル ユニマックスシリーズ UTCOAT 4枚刃高能率縦横送り 部品加工用スクエアエンドミル UTCOAT 4 枚刃高能率縦横送り部品加工用スクエアエンドミル 4 Flute Highly Efficient Square End Mills for both Drilling & Slotting サイズ Size φ1~φ20 CZS 対応表 ( の順に推奨 )Material Applications( Highly Recommended Recommended Suggested)

More information

底面仕上の加工が良好で立ち壁仕上げ加工もできる多機能エンドミル provides good bottom finishing and can also perform standing wall finishing. ultifunction end mill 多刃仕様により仕上げ加工の スピードア

底面仕上の加工が良好で立ち壁仕上げ加工もできる多機能エンドミル provides good bottom finishing and can also perform standing wall finishing. ultifunction end mill 多刃仕様により仕上げ加工の スピードア ASPV type アルファポリッシュミル V タイプ ASPV 形 Polish ill V type ASPV New Product News No. 00 底面仕上の加工が良好で立ち壁仕上げ加工もできる多機能エンドミル provides good bottom finishing and can also perform standing wall finishing. ultifunction

More information

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U 汎用 用 ル ル S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High rigidity makes the

More information

切削条件表超硬 4 枚刃不等分割不等リードエンドミル 38 /41 刃長 1.5D 型式 外径 一般構造用鋼炭素鋼 (S45C/SS/FC/FCD) (24~30HRC) 合金鋼 (SCM/ 低合金鋼 ) (30~38HRC) ステンレス鋼 (SUS304/SUS316) プリハードン鋼 (SKD/

切削条件表超硬 4 枚刃不等分割不等リードエンドミル 38 /41 刃長 1.5D 型式 外径 一般構造用鋼炭素鋼 (S45C/SS/FC/FCD) (24~30HRC) 合金鋼 (SCM/ 低合金鋼 ) (30~38HRC) ステンレス鋼 (SUS304/SUS316) プリハードン鋼 (SKD/ 形状別エンドミル目次不等分割不等リードボールラジアススクエアラフィングアルミ用面取り リーディングドリル不等分割不等リード φ1 20 超硬 4 枚刃不等分割不等リードエンドミル 3 8 / 4 1 刃長 1. 5 D E141-1.5HX 材質 仕様 N 90 γ5 90 加工形態 対応表 ( 最適 / 適 ) 炭素鋼 工具鋼 プリハードン鋼 合金鋼 プリハードン鋼 焼き入れ鋼 ステンレス鋼 ダグタイル

More information

OSG Product Catalogue VOL-2.pdf

OSG Product Catalogue VOL-2.pdf IPG CARBIDE END MILLS & DRILLS S SERIES 2 FLUTE SHORT SMG-EDS 2 FLUTE SHORT WITH PREMIER COATING TA-SMG-EDS S S 1 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 PRe

More information

高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMa

高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMa 高能率 多機能タップ A-TAP Vol.10 新価格体系 New Price 2018 年 6 月 Highly Efficient Multi-Purpose Tap Series タップホルダ シンクロマスター SynchroMaster 追加 New tap holder SynchroMaster INDEX A-TAP is A-TAP Features 3 Cutting Conditions

More information

CBN エンドミルシリーズ CBN End Mill Series 高硬度材の長時間仕上げ加工に最適! Suitable for long finishing operation in hardened steels CBN エンドミルシリーズ CBN End Mill Series 工具素材にダイ

CBN エンドミルシリーズ CBN End Mill Series 高硬度材の長時間仕上げ加工に最適! Suitable for long finishing operation in hardened steels CBN エンドミルシリーズ CBN End Mill Series 工具素材にダイ CBN END MILL SER IES Vol.2 CBN エンドミルシリーズ Vol.2 CBN エンドミルシリーズ CBN End Mill Series 高硬度材の長時間仕上げ加工に最適! Suitable for long finishing operation in hardened steels CBN エンドミルシリーズ CBN End Mill Series 工具素材にダイヤモンドに次ぐ硬さをもつ

More information

TOOL NEWS B223J

TOOL NEWS B223J TOOL NEWS B223J センタリング 面取り加工用超硬ドリル リーディングドリルシリーズ 新発売 切れ味が良く耐欠損性に優れ ステンレス鋼でも安定加工 センタリング 面取り加工用超硬ドリル リーディングドリルシリーズ センタリングと面取り加工の要求性能を追求 センタリング 面取り加工 横送り面取り加工 V 溝加工 ドリル使用範囲 特長 良好な食付き性を実現するシンニング 中心部の切りくず排出スペースにより

More information

evel egarding the Transmission apability Table 1. The values given in the table are for a service factor of 1.Using the table on the right, please mod

evel egarding the Transmission apability Table 1. The values given in the table are for a service factor of 1.Using the table on the right, please mod NISSEI evel New Products evel gears atalog Number of NISSEI evel The catalog number systems of differs from other miter gears. 001 G F Hand of () Products Shape (Finished Shape) Surface finish () The haracteristics

More information

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U < 汎用機用 > S ホルダ ( Q C ホルダ ) S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High

More information

A J コーティングが新たにラインナップ! 超快削刃型と多機能刃型の融合 New variations of coating, introducing AJ coating series. Fusion of "easy cutting geometry"and "multi function ge

A J コーティングが新たにラインナップ! 超快削刃型と多機能刃型の融合 New variations of coating, introducing AJ coating series. Fusion of easy cutting geometryand multi function ge 刃先交換式快削エンドミル Easy cut multi function mill AHJ type アルファ快削じゅうおう AHJ 形 Easy cut multi function mill AHJ type New Product News No.00-6 08-7 A J コーティングが新たにラインナップ! 超快削刃型と多機能刃型の融合 New variations of coating,

More information

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ "R"Zero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ R ゼロホルダ RZero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです ターニングツールTurning Tools for SPEEDIO STシャンーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic

More information

研磨用 CBN カッタ for Polishing 研磨作業に適したです Suitable for polishing. 優れた自生作用により 細目粒度であっても目づまりが起こりません 合金 サメット 鋼 合金鋼 MINIMO推奨ピス 銅 エアグラインダ ボル盤 電気 両頭グラインダ / Coppe

研磨用 CBN カッタ for Polishing 研磨作業に適したです Suitable for polishing. 優れた自生作用により 細目粒度であっても目づまりが起こりません 合金 サメット 鋼 合金鋼 MINIMO推奨ピス 銅 エアグラインダ ボル盤 電気 両頭グラインダ / Coppe CONTENTS P127-132 for Polishing HIGH PERFORMANCE PRECISION POWER TOOL SYSTEM P133-138 for Grinding Explanation for Elastic Points 研磨用 CBN カッタ for Polishing 研磨作業に適したです Suitable for polishing. 優れた自生作用により

More information

PCD エンドミルシリーズ PCD End Mill Series 鏡面のような ツルツル すべすべ ピカピカ な仕上げ面を切削で実現! Finished surface looks smooth, even and shiny such as the mirror surface realized

PCD エンドミルシリーズ PCD End Mill Series 鏡面のような ツルツル すべすべ ピカピカ な仕上げ面を切削で実現! Finished surface looks smooth, even and shiny such as the mirror surface realized PCD エンドミルシリーズ PCD End Mill Series 鏡面のような ツルツル すべすべ ピカピカ な仕上げ面を切削で実現! Finished surface looks smooth, even and shiny such as the mirror surface realized by milling process. 工具素材に PCD( 多結晶ダイヤモンド ) を採用 新次元の仕上げ品位を得られる特殊な刃先形状

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181 These items are using an aluminum alloy cast, so the weight is corrosion-resistant and excel halo tolerance and is light-weight and it's about 1/3 compared with conventional cast iron and made of steel

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

TR503_DoTriple-Mill.indd

TR503_DoTriple-Mill.indd MillLine Tungaloy Report No. 53-J 3 ACCELERATED MACHINING MillLine 4 8 3 SNMU / SNGU P6P7 SNMU-MJ SNGU-MJ SNGU-MH SNGU-W ONMU / ONGU P8 ONMU-MJ ONGU-MJ ONGU-W RNMU P9 RNMU-MJ MJ - 3 1 - A A A-A 4 DOTRIPLEMILL

More information

<8B5A8F70985F95B632936EE7B22E696E6464>

<8B5A8F70985F95B632936EE7B22E696E6464> 47 Electrical Discharge Truing for Electroplated Diamond Tools Koji Watanabe Hisashi Minami Hatsumi Hiramatsu Kiyonori Masui (211 7 8 ) Electroplated diamond tools are widely used for grinding because

More information

高能率 多機能タップ A-TAP Vol.9 Highly Efficient Multi-Purpose Tap Series

高能率 多機能タップ A-TAP Vol.9 Highly Efficient Multi-Purpose Tap Series 高能率 多機能タップ A-TAP Vol.9 Highly Efficient Multi-Purpose Tap Series INDEX A-TAP is A-TAP Features 3 Cutting Conditions 5 Cutting Data 7 A-SFT for Blind Holes Metric Screw Thread A-SFT 15 (1.5P1P) Short Chamfer

More information

Safe-ock 1 by HIMER

Safe-ock 1 by HIMER Vol.2 Safe-ock UVX-TI Safe-ock 1 by HIMER SFE-λOCK 3 SFE-λOCK SFE-λOCK 4 Safe-ock 33DG=2.5 25,000min -1 2 OSG-HIMER OSG-HIMER Safe-ock SFE-λOCK UVX-TI OSG Safe-ock mm 6 8 10 12 14 16 18 20 25 32 40 42

More information

March 8, 2011 March 8,

March 8, 2011 March 8, March 8, 2011 March 8, 2011 2 March 8, 2011 3 March 8, 2011 4 4 5 March 8, 2011 March 8, 2011 2009 NCTC Report on Terrorism NCTC National Counterterrorism Center 6 2009 NCTC Report on Terrorism March 8,

More information

TOOLS NEWS B137J

TOOLS NEWS B137J TOOLS NEWS 2013.2 B137J WSTAR s l.dl?r WSTAR && 1 a y WSTAR s l.dl?r (Al,Ti)N TF15 (%) mm 1.22E+03 1.16E+03 1.10E+03 1.04E+03 9.76E+02 9.15E+02 8.54E+02 7.93E+02 7.32E+02 6.71E+02 6.10E+02 5.49E+02 4.88E+02

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

水晶振動子/発振器

水晶振動子/発振器 !! !! r !! !! !! !! 1.2±0.1 1.0±0.1 rr 0.60 0.30 max. (1) (4) 0.63 0.42 1.6±0.1 (2) (3) 0.35 (1) Crystal Terminal (2) GND (3) Crystal Terminal (4) No Connect Marking Monthly Code 1.2±0.1 0.68 0.35 max.

More information