特-4.indd
|
|
- よりとし かに
- 7 years ago
- Views:
Transcription
1 1 000 Ni-Cr Tribological Characteristics of Ni-Cr Alloy at C in Air R&D Ni-Cr Ni-Cr alloy sliding tests in atmosphere at C were carried out and the process in which a glazed oxide layer was formed on the wear track was investigated. We have confirmed the formation of a glazed oxide layer through a detailed analysis of the surface and the cross-section of the wear track. Furthermore, the discharge of wear particles necessary for the formation of glazed oxide is promoted at C so that glazed oxide begins to form at a comparatively early stage, thereby showing excellent tribological characteristics. 1. 緒言 ( 1 ) ( 2 ) Ni-Cr ( 3 ) ( 4 ) 800 ( 3 ) ( 7 ) Ni-Cr 試験供試体 2. 試験方法 第 1 表 Ni-Cr mm f12 20 mm Ra 0.8 mm 試験装置 第 1 図 第 1 表 Ni-Cr Table 1 Main composition of Ni-Cr alloy mass Ni Cr C Al Ni-Cr IHI Vol.52 No.3 ( 2012 ) 79
2 1.0 ( a ) 第 1 図 Fig. 1 Schematic image of test rig 試験条件 11 N 3.3 mm/s 10 mm SEM ( Scanning Electron Microscope ) SEM WDS ( Wave Dispersive Spectroscopy ) EDS ( Energy Dispersive Spectroscopy ) WDS 3. 試験結果および考察 ( b ) 大気中の Ni-Cr 合金のトライボロジー特性第 2 図 Ni-Cr 第 2 図 - ( a ) 第 2 図 - ( b ) 第 3 図 mm 3. 2 試験後の摺動面の比較 SEM 第 4 図 2 第 4 図 - ( a ) 第 4 図 - ( d ) 100 第 4 図 - ( b ) 2 - ( a ) 第 4 図 - ( c ) - ( f ) ( b ) - ( e ) 第 4 図 - ( c ) 第 2 図 Ni-Cr Fig. 2 Friction coefficient of Ni-Cr alloy 80 IHI Vol.52 No.3 ( 2012 )
3 ( a ) ( b ) A A ( µm ) ( c ) ( d ) B 2.5 B 12.5 ( µm ) 第 3 図 mm Fig. 3 Profiles of sliding surfaces after cycles ( unit : mm ) ( a ) 2 ( b ) 100 ( c ) SEM ( d ) 2 ( e ) 100 ( f ) SEM 第 4 図 Fig. 4 Comparison of sliding surfaces after tests 3. 3 試験後摺動表面の詳細観察 100 第 5 図 第 6 図 第 5 図 - ( a ) 第 4 図 - ( b ) 第 6 図 - ( a ) 第 4 図 - ( e ) SEM ( Ni ) ( Cr ) IHI Vol.52 No.3 ( 2012 ) 81
4 ( a ) SEM 4 - ( b ) ( b ) 第 5 図 Fig. 5 Element distribution on the sliding surface of a plate specimen ( a ) SEM 4 - ( e ) ( b ) 第 6 図 Fig. 6 Element distribution on the sliding surface of a cylinder specimen ( Al ) 3. 4 摺動面と非摺動面の比較 100 第 5 図 - ( a ) SEM 第 7 図 ( 5 ) ( 6 ) Ni-Cr 第 7 図 - ( a ) SEM nm ( 7 ) 750 Ni-Cr Co-Cr 5 15 nm ( a ) 5 ( a ) ( b ) 5 µm 5 µm 第 7 図 100 Fig. 7 Sliding and non sliding surface after 100 cycles 82 IHI Vol.52 No.3 ( 2012 )
5 3. 5 摺動部の断面の詳細観察第 8 図 第 9 図 SEM 第 10 図 SEM 2.3 mm 7.9 mm ( a ) SEM ( b ) 第 8 図 Fig. 8 Element distribution on the cross-sectional sliding surface of a plate specimen ( a ) SEM ( b ) 第 9 図 Fig. 9 Element distribution on the cross-sectional sliding surface of a cylinder specimen ( a ) SEM ( b ) 第 10 図 Fig. 10 Element distribution on the non sliding surface of a cylinder specimen IHI Vol.52 No.3 ( 2012 ) 83
6 大気中における Ni-Cr 合金のグレーズ酸化膜の形成機構の特徴 Ni-Cr Ni-Cr 結言 Ni-Cr 参考文献 ( 1 ) RHV4 ( STEP4 ) IHI pp ( 2 ) MSCoating IHI pp ( 3 ) F. H. Stott : High-temperature sliding wear of metals Tribology International Vol. 35 No. 8 ( ) pp ( 4 ) F. H. Stott and G. C. Wood : The influence of oxides on the friction and wear of alloys Tribology International Vol. 11 No. 4 ( ) pp ( 5 ) Ni-Cr Vol. 28 No pp ( 6 ) A. Pauschitz, Manish Roy and F. Franek : Mechanisms of sliding wear of metals and alloys at elevated temperatures Tribology International Vol. 41 No. 7 ( ) pp ( 7 ) I. A. Inman, S. Datta, H. L. Du, J. S. Burnell- Gray and Q. Luo : Microscopy of glazed layers formed during high temperature sliding wear at 750 C Wear Vol. 254 No. 5 6 ( ) pp IHI Vol.52 No.3 ( 2012 )
Vol. 21, No. 2 (2014) W 3 mm SUS304 Ni 650 HV 810 HV Ni Ni Table1 Ni Ni μm SUS mm w 50 mm l 3 mm t 2.2 Fig. 1 XY Fig. 3 Sch
110 : 565-0871 2-1 567-0871 11-1 660-0811 1-9 - 1 tanigawa@jwri.osaka - u.ac.jp Influence of Laser Beam Profile on Cladding Layer TANIGAWA Daichi, ABE Nobuyuki, TSUKAMOTO Masahiro, HAYASHI Yoshihiko, YAMAZAKI
More information特-7.indd
Mechanical Properties and Weldability of Turbine Impeller Materials for High Temperature Exhaust Gas Turbocharger 1 000 1 050 246 IN100 The increase in environmental awareness in recent years has led to
More information電子部品はんだ接合部の熱疲労寿命解析
43 Evaluation for Thermal Fatigue Life of Solder Joints in Electronic Components Haruhiko Yamada, Kazuyoshi Ogawa 2 63Sn- 37Pb 95Pb-5Sn Si Cu Si 63Sn-37Pb Since automotive electronic components are used
More informationCuおよびCu‐Sn系化合物のSn‐Pbはんだ濡れ性解析
61 Wettability of Cu and Cu-Sn Intermetallic Compound by Sn-Pb Solder Alloy Hisaaki Takao, Nobuyuki Yamamoto, Hideo Hasegawa CuCu-Sn Cu 150 C 2h55nmCu 2 O Cu Cu-Sn 5nm Cu-Sn Cu SnCu-Sn Wettability of Cu
More informationThe Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch
The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Chikara MINAMISAWA, Nozomu AOKI (Department of Mechanical
More informationFig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T
Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.
More information無電解めっきとレーザー照射による有機樹脂板上へのCuマイクロパターン形成
Title 無電解めっきとレーザー照射による有機樹脂板上への Cu マイクロパターン形成 Author(s) 菊地, 竜也 ; 和智, 悠太 ; 坂入, 正敏 ; 高橋, 英明 ; 飯野, 潔 ; 片山, 直樹 Citation 表面技術, 59(8): 555-561 Issue Date 2008-08 Doc URL http://hdl.handle.net/2115/36647 Type
More informationInfluence of Material and Thickness of the Specimen to Stress Separation of an Infrared Stress Image Kenji MACHIDA The thickness dependency of the temperature image obtained by an infrared thermography
More informationFig. 4. Configuration of fatigue test specimen. Table I. Mechanical property of test materials. Table II. Full scale fatigue test conditions and test
(J. Soc. Mat. Sci., Japan), Vol. 52, No. 11, pp. 1351-1356, Nov. 2003 Fatigue Life Prediction of Coiled Tubing by Takanori KATO*, Miyuki YAMAMOTO*, Isao SAWAGUCHI** and Tetsuo YONEZAWA*** Coiled tubings,
More informationTable 1. Reluctance equalization design. Fig. 2. Voltage vector of LSynRM. Fig. 4. Analytical model. Table 2. Specifications of analytical models. Fig
Mover Design and Performance Analysis of Linear Synchronous Reluctance Motor with Multi-flux Barrier Masayuki Sanada, Member, Mitsutoshi Asano, Student Member, Shigeo Morimoto, Member, Yoji Takeda, Member
More informationVol. 19, No. 3 (2012) 207 Fig. 2 Procedures for minute wiring onto polyimide substrate. Fig. 3 Ink - jet printing apparatus as part of laser sintering
206 : 316-8511 4-12 - 1 Laser Sintering Characteristics of Silver Nanoparticle Paste for Electronics Packaging YAMASAKI Kazuhiko, MAEKAWA Katsuhiro (Received January 10, 2012) Ibaraki University, Faculty
More information渡辺(2309)_渡辺(2309)
[ 29 p. 241-247 (2011)] ** *** ** ** Development of a nickel-based filler metal containing a small amount of silicon by WATANABE Takehiko, WAKATSUKI Ken, YANAGISAWA Atsusi and SASAKI Tomohiro Authors tried
More information<8B5A8F70985F95B632936EE7B22E696E6464>
47 Electrical Discharge Truing for Electroplated Diamond Tools Koji Watanabe Hisashi Minami Hatsumi Hiramatsu Kiyonori Masui (211 7 8 ) Electroplated diamond tools are widely used for grinding because
More informationIHIMU Energy-Saving Principle of the IHIMU Semicircular Duct and Its Application to the Flow Field Around Full Scale Ships IHI GHG IHIMU CFD PIV IHI M
IHIMU Energy-Saving Principle of the IHIMU Semicircular Duct and Its Application to the Flow Field Around Full Scale Ships IHI GHG IHIMU PIV IHI Marine United Inc. ( IHIMU ) has already developed several
More informationRate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been s
Rate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been studied using a volume constant technique. The process
More information日立金属_33.indb
Boundary Lubrication Mechanism for Self-lubricating ecialty Steel with Low Friction Loss Kunichika Kubota Seishin Ueda Tatsuya Shoji The Hitachi-developed steel SLD-MAGIC TM has become popular in the Japanese
More informationAl-Si系粉末合金の超塑性
Superplasticity of Al-Si P/M Alloys Satoru Ishihara, Mikio Kondoh, Kazuhiko Itoh Al-17Si-4.5Cu-0.5Mg-(06)Fe-(02)Mm ( Mm : ) (i) (ii) Si(iii) Fe (iv) Mm Al-17Si-4.5Cu-0.5Mg500 10 2 s 1 520 110 1 s 1 Si
More informationJ. Jpn. Inst. Light Met. 65(6): 224-228 (2015)
65 62015 224 228 ** Journal of The Japan Institute of Light Metals, Vol. 65, No. 6 (2015), 224 228 2015 The Japan Institute of Light Metals Investigation of heat flow behavior on die-casting core pin with
More information走査型プローブ顕微鏡によるラテックス/デンプンブレンドフィルムの相分離状態の観察
紙パ技協誌, 53(3): 107-113(1999) * 1 Observation of Separated Domains in SB-latex/Starch blend film by Scanning Probe Microscope Toshiharu Enomae and Fumihiko Onabe Graduate School of Agricultural and Life
More informationスペースプラズマ研究会-赤星.ppt
14 1 1 1 1 Pauline Faure 1 1 2 3 (1: 2: JAXA 3: IHI) IHI (C)(No.21560819) ISAS(JAXA) ISO TC20/SC14 / (Spall) 60~90% 2 (Cone) 1% (Jetting) CDV11227 Committee Draft for Comments CDV11227 Witness plate Sabot
More informationステンレス鋼用高性能冷間鍛造油の開発
Development of High Performance Cold Forging Oil for Stainless Steel Toshihide Ohmori, Kazuhiko Kitamura ClP ( ) Cl P-Zn ( P ) ClP-Zn High performance cold forging oil for stainless steel has been developed
More informationUDC : ' : '24' : '24'26' : : A Study of Condition of Pits Formation and Their Fe
UDC 620.193: 669.15'26-194.3: 669.15'24'26-194.3: 669.15'24'26'28-194.3: 669.141.24: 621.385.833.2 A Study of Condition of Pits Formation and Their Features in Chloride Solution Norio FUKASAKO, Hirokazu
More informationTitle インジウムを添加した Ag-Au-Cu-Pd 系合金の物性 Author(s) 時崎, 照彦 ; 服部, 雅之 ; 小田, 豊 Journal 歯科材料 器械, 26(5-6): URL Right Post
Title インジウムを添加した Ag-Au-Cu-Pd 系合金の物性 Author(s) 時崎, 照彦 ; 服部, 雅之 ; 小田, 豊 Journal 歯科材料 器械, 26(5-6): 367-374 URL http://hdl.handle.net/10130/420 Right Posted at the Institutional Resources for Unique Colle
More informationS-5.indd
Development and pplication of Ultrasonic Noise B-scan nalysis ( I-CLT ) Creep Damage ssessment for Fossil-Fuel Boiler Piping precise creep damage assessment method has been required for boiler plants using
More information原著03_高橋.indd
55 171 2013 73-80 Journal of the Combustion Society of Japan Vol.55 No.171 (2013) 73-80 ORIGINAL PAPER 酸化微粒子塗布バーナによる表面改質 Surface Modification by Oxide Particles Spray Burner 1 2 * 1 2 2 GOTO, Masaya 1,
More information特-3.indd
Development of Automation Technology for Precision Finishing Works Employing a Robot Arm There is demand for the automation of finishing processes that require technical skills in the manufacturing of
More informationEffect of Autofrettage on Fatigue Crack Growth Rate for High Pressure Reactors For high pressure reactor vessels such as for polyethylene production,
Effect of Autofrettage on Fatigue Crack Growth Rate for High Pressure Reactors For high pressure reactor vessels such as for polyethylene production, autof rettage is used extensively to have the fatigue
More information年次大会原稿最終.PDF
Structural Analysis of Coating Layer Containing Plastic Pigments Yoko Saito, Hideki Touda, Junji Kasai ZEON Corporation Hitomi Hamada, Toshiharu Enomae, Fumihiko Onabe The University of Tokyo Recently,
More information日立金属技報 Vol.34
Influence of Misorientation Angle between Adjacent Grains on Magnetization Reversal in Nd-Fe-B Sintered Magnet Tomohito Maki Rintaro Ishii Mitsutoshi Natsumeda Takeshi Nishiuchi Ryo Uchikoshi Masaaki Takezawa
More information01_辻
20 EBSD 2008.11.28 scanning electron microscope: SEM EBSD electron back scattering diffraction [1-4] 10 EBSD anisotropy polycrystal orientation texture EBSD EBSD EBSD EBSD Table 1 EBSD Table 1-10 mmφ
More informationCorrosion Wear of Alloy Tool Steel (SKD 11) Coated with VC and Precipitation Hardening Stainless Steel (SUS 630) in Sodium Chloride Aqueous Solution T
Corrosion Wear of Alloy Tool Steel (SKD 11) Coated with VC and Precipitation Hardening Stainless Steel (SUS 630) in Sodium Chloride Aqueous Solution Toshiyuki TANAKI*, Makoto YUASA** and Isao SEKINE***
More informationStudy of the "Vortex of Naruto" through multilevel remote sensing. Abstract Hydrodynamic characteristics of the "Vortex of Naruto" were investigated b
Study of the "Vortex of Naruto" through multilevel remote sensing. Abstract Hydrodynamic characteristics of the "Vortex of Naruto" were investigated based on the remotely sensed data. Small scale vortices
More information*1 *2 *1 JIS A X TEM 950 TEM JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbe
*1 *2 *1 JIS A 14812008X TEM 950 TEM 1 2 3 4 JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbestos with Superheated Steam Part 3 An evaluation with
More information(43) Vol.33, No.6(1977) T-239 MUTUAL DIFFUSION AND CHANGE OF THE FINE STRUCTURE OF WET SPUN ANTI-PILLING ACRYLIC FIBER DURING COAGULATION, DRAWING AND
(43) Vol.33, No.6(1977) T-239 MUTUAL DIFFUSION AND CHANGE OF THE FINE STRUCTURE OF WET SPUN ANTI-PILLING ACRYLIC FIBER DURING COAGULATION, DRAWING AND DRYING PROCESSES* By Hiroshi Aotani, Katsumi Yamazaki
More informationTable 1. Shape and smelting properties of chrome ores as delivered. Table 2. Chemical composition of chrome ores (%). Table 3. Chemical composition of
UDC 669.263.1: 669.046.462 The Reduction Process and Reducibility of Chromite with Carbon Hiroshi G. KATAYAMA and Akihiko TANAKA Synopsis: In the present work, various chrome ores and relatively pure chromites
More informationMikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization
Mikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization) in the annealed state of iron-cobalt alloys has been
More informationT05_Nd-Fe-B磁石.indd
Influence of Intergranular Grain Boundary Phases on Coercivity in Nd-Fe-B-based Magnets Takeshi Nishiuchi Teruo Kohashi Isao Kitagawa Akira Sugawara Hiroyuki Yamamoto To determine how to increase the coercivity
More information41 1 Table 1. Chemical composition of alloys (mass%). Alloy Fe Cr Al S Pd Pt Fe 20Cr 4Al (Standard) Bal Fe 20Cr 4Al (FZ) Bal
MEMOIRS OF SHONAN INSTITUTE OF TECHNOLOGY Vol. 41, No. 1, 2007 * Effects of Element Additions on High-Temperature Corrosion of Heat-Resisting Alloys Tadaaki AMANO* Adherence of oxide scale formed on Fe
More information20 12,, 59 q r 2 2.1 Fig.2 [3] Fig.3 1cm Fig.2 Schematic of experimental apparatus for measuring interfacial thermal resistance. Fig.3 Surface morphol
58 *1, *1, * 2 Mechanism of Heat Transfer through Mold Flux in Continuous Casting Mold By Hiroyuki Shibata, Shin-ya Kitamura and Hiromichi Ohta 1 K.C.Mills and A.B.Fox [1] [2] Fig.1 q c q r q t q t = q
More informationSystem to Diagnosis Concrete Deterioration with Spectroscopic Analysis IHI IHI IHI The most popular method for inspecting concrete structures for dete
System to Diagnosis Concrete Deterioration with Spectroscopic Analysis IHI IHI IHI The most popular method for inspecting concrete structures for deterioration ( for example, due to chloride attack ) is
More informationSafety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------
More informationレーザ誘起蛍光法( LIF法) によるピストンの油膜挙動の解析
Analysis of Piston Oil Film Behavior by Using Laser Induced Fluorescence Method Shuzou Sanda, Akinori Saito ( Laser Induced Fluorescence Method LIF ) LIF Scanning -LIF Abstract Analysis of the oil film
More informationTable-1 Formulation for testing water-based sunscreen gel containing P-ZnO. q. s.: quantum sufficit. J. Soc. Cosmet. Chem. Jpn. Vol. 42, No. 2 2008 103 Fig.-1 X-ray diffraction patterns of P-ZnO. Fig.
More informationThe Evaluation of LBB Behavior and Crack Opening Displacement on Statically Indeterminate Piping System Subjected to Monotonic Load The plastic collap
The Evaluation of LBB Behavior and Crack Opening Displacement on Statically Indeterminate Piping System Subjected to Monotonic Load The plastic collapse and LBB behavior of statically indeterminate piping
More informationアルミニウム合金のイオン窒化
Studies on Ion Nitriding of Aluminum and Its Alloys Hideo Tachikawa 400 500 H V 1000 1600 TiN HCl Studies were made on low temperature ion nitriding of aluminum and its alloys by dc glow discharge in nitrogen
More informationDevelopment of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake
Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake supplied to the engine, and as such are critical elements
More informationLNG Tank-Its Structure, the Materials and Welding Techniques Yasunosuke OGAWA, Mitsuhiro SAKAMOTO, Kiyoaki TOYOMASU, Mitsuo OHYAMA, Munemitsu FUKAGAWA, and Yoshinori SAIGA Table 2. Material list for various
More informationTable 2 C, Al and Nb contents of samples (%) Table 3 C, Al and Nb contents of samples (%) Table 4 C, Al and Nb contents of samples (%) 6
Study on the Weldability of Ni Base Superalloy (Part 7) Improvement of Hot Crack Sensitivity of Inconel 713C and its Mechanical Properties by Hiroshi Ikawa, Shigeo Shin, Yoshikuni Nakao, Haruo Yawata and
More informationuntitled
(a) (b) (c) (d) (e) (f) (g) (f) (a), (b) 1 He Gleiter 1) 5-25 nm 1/2 Hall-Petch 10 nm Hall-Petch 2) 3) 4) 2 mm 5000% 5) 1(e) 20 µm Pd, Zr 1(f) Fe 6) 10 nm 2 8) Al-- 1,500 MPa 9) 2 Fe 73.5 Si 13.5 B 9 Nb
More informationInstability of Aerostatic Journal Bearings with Porous Floating Bush at High Speeds Masaaki MIYATAKE *4, Shigeka YOSHIMOTO, Tomoaki CHIBA and Akira CH
Instability of Aerostatic Journal Bearings with Porous Floating Bush at High Speeds Masaaki MIYATAKE *4, Shigeka YOSHIMOTO, Tomoaki CHIBA and Akira CHIBA Department of Mechanical Engineering, Tokyo University
More information9 171179 2006 Sn Ag Cu Effect of Addition Elements on Creep Properties of the Sn Ag Cu Lead Free Solder Megumi NAGANO*, Noboru HIDAKA*, Hirohiko WATANABE*, Masayoshi SHIMODA* and Masahiro ONO* * 191-8502
More information16 (16) poly-si mJ/cm 2 ELA poly-si super cooled liquid, SCL [3] a-si poly-si [4] solid phase crystalization, SPC [5] mJ/cm 2 SPC SCL (di
(15) 15 ELA により形成された poly-si 結晶成長様式 - グレイン形状と水素の関係 - Crystal Growth Mode of Poly-Si Prepared by ELA -Relationship between the Grain Morphology and ydrogens- Naoya KAWAMOTO (Dept. of Electrical and Electronic
More informationTable 1. St-VAc blockcopolymers Table 2. Stability of dispersion of blockcopolymers in unsaturated polyester
97 Table 1. St-VAc blockcopolymers Table 2. Stability of dispersion of blockcopolymers in unsaturated polyester (a) (b) (c) Fig. 1. Phase reversions of poly (St-b-VAc) in unsaturated polyester. Fig. 2.
More informationX-Ray Investigation on the Residual Stress of Metallic Materials (On the Residual Stress of Stretched Carbon Steel) by Shuji TAIRA and Yasuo YOSHIOKA
X-Ray Investigation on the Residual Stress of Metallic Materials (On the Residual Stress of Stretched Carbon Steel) by Shuji TAIRA and Yasuo YOSHIOKA (Faculty of Engineering, Kyoto University, Kyoto) The
More information藤村氏(論文1).indd
Nano-pattern profile control technology using reactive ion etching Megumi Fujimura, Yasuo Hosoda, Masahiro Katsumura, Masaki Kobayashi, Hiroaki Kitahara Kazunobu Hashimoto, Osamu Kasono, Tetsuya Iida,
More informationFig. 1. Schematic drawing of testing system. 71 ( 1 )
1850 UDC 669.162.283 : 669.162.263.24/. 25 Testing Method of High Temperature Properties of Blast Furnace Burdens Yojiro YAMAOKA, Hirohisa HOTTA, and Shuji KAJIKAWA Synopsis : Regarding the reduction under
More information42 1 Fig. 2. Li 2 B 4 O 7 crystals with 3inches and 4inches in diameter. Fig. 4. Transmission curve of Li 2 B 4 O 7 crystal. Fig. 5. Refractive index
MEMOIRS OF SHONAN INSTITUTE OF TECHNOLOGY Vol. 42, No. 1, 2008 Li 2 B 4 O 7 (LBO) *, ** * ** ** Optical Scatterer and Crystal Growth Technology of LBO Single Crystal For Development with Optical Application
More information地質調査研究報告/Bulletin of the Geological Survey of Japan
Hideaki Nagamori, Hiroaki Yoshikawa, Koji Hatakeyama, Masumi Terao and Tomotaka Tanabe (2005) Proboscidean footprint fossils from the Lower Pleistocene Okui Formation on the river bed of Chikuma River,
More information塗装深み感の要因解析
17 Analysis of Factors for Paint Depth Feeling Takashi Wada, Mikiko Kawasumi, Taka-aki Suzuki ( ) ( ) ( ) The appearance and quality of objects are controlled by paint coatings on the surfaces of the objects.
More informationï\éÜA4*
Feature Article Imaging of minuscule amounts of chemicals, Scannimg Chemical Microscope --- Increasing analysis information through imaging --- Abstract We have developed a Scanning Chemical Microscope
More informationJournal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp
58 00847 53 * ** ** Journal of Japan Institute of Light Metals, Vol. 58, No. 008, pp. 47 53 Production of aluminum tall container with flange by hydraulic bulging with compression of surrounding material
More informationNatural Convection Heat Transfer in a Horizontal Porous Enclosure with High Porosity Yasuaki SHIINA*4, Kota ISHIKAWA and Makoto HISHIDA Nuclear Applie
Natural Convection Heat Transfer in a Horizontal Porous Enclosure with High Porosity Yasuaki SHIINA*4, Kota ISHIKAWA and Makoto HISHIDA Nuclear Applied Heat Technology Division, Japan Atomic Energy Agency,
More information16−ª1“ƒ-07‘¬ŠÑ
The purpose of this study is to clarify a process that Awa dance developed into tourist resources and the factors that it spread out in all over Japan. Consideration was made with the memory magazines,
More informationJ Jpn Prosthodont Soc 51: 11-21, 2007 Analysis of Polished Surfaces of Titanium Castings Miura Eiji, Takayama Yasuko, Kawai Yoshiyuki, Hosoi Toshio an
J Jpn Prosthodont Soc 51: 11-21, 2007 Analysis of Polished Surfaces of Titanium Castings Miura Eiji, Takayama Yasuko, Kawai Yoshiyuki, Hosoi Toshio and Mizuno Yukihiro* The First Department of Prosthetic
More informationField Measurement of Aeolian Sand Flux over a Sand Dune Slope Junaidi Keiko UDO, Shota MITSUSHIO, JUNAIDI, Shin-ichi AOKI, Shigeru KATO and Akira MANO
Field Measurement of Aeolian Sand Flux over a Sand Dune Slope Junaidi Keiko UDO, Shota MITSUSHIO, JUNAIDI, Shin-ichi AOKI, Shigeru KATO and Akira MANO This study conducted field observations in terms of
More information16 Dissolution Rate of Alumina into Molten CaO-SiO2--Al2O3-MgO Slags Shoichirou TAIRA, Kunihiko NAKASHIMA and Katsumi MORI Synopsis : Dissolution rate
16 Dissolution Rate of Alumina into Molten CaO-SiO2--Al2O3-MgO Slags Shoichirou TAIRA, Kunihiko NAKASHIMA and Katsumi MORI Synopsis : Dissolution rates of sintered alumina into molten CaO-SiO2-9mass%Al2O3-10mass%MgO
More informationTable 2 Cases of Nail Deformity Associated with upward Distortion of Distal Soft Tissue No. Age Sex Affected RegionsDuration Results M Both grea
Table 2 Cases of Nail Deformity Associated with upward Distortion of Distal Soft Tissue No. Age Sex Affected RegionsDuration Results 1. 49 M Both great toes 2 years Cured after 4 months 2. 11 F Both great
More informationSurface Morphology for Poly-L-lactide Fibers Subjected to Hydrolysis Suong-Hyu Hyon Institute for Frontier Medical Sciences, Kyoto University 53, Shog
Surface Morphology for Poly-L-lactide Fibers Subjected to Hydrolysis Suong-Hyu Hyon Institute for Frontier Medical Sciences, Kyoto University 53, Shogoin Kawaharacho, Sakyo-ku, Kyoto, 606-8507 Japan Abstract:
More informationLAGUNA LAGUNA 10 p Water quality of Lake Kamo, Sado Island, northeast Japan, Katsuaki Kanzo 1, Ni
LAGUNA10 47 56 2003 3 LAGUNA 10 p.47 56 2003 1997 2001 1 2 2 Water quality of Lake Kamo, Sado Island, northeast Japan, 1997 2001 Katsuaki Kanzo 1, Niigata Prefectural Ryotsu High School Science Club, Iwao
More informationOptical Lenses CCD Camera Laser Sheet Wind Turbine with med Diffuser Pitot Tube PC Fig.1 Experimental facility. Transparent Diffuser Double Pulsed Nd:
*1 *2 *3 PIV Measurement of Field of the Wind Turbine with a med Diffuser Kazuhiko TOSHIMITSU *4, Koutarou NISHIKAWA and Yuji OHYA *4 Department of Mechanical Engineering, Matsue National Collage of Technology,
More informationEQUIVALENT TRANSFORMATION TECHNIQUE FOR ISLANDING DETECTION METHODS OF SYNCHRONOUS GENERATOR -REACTIVE POWER PERTURBATION METHODS USING AVR OR SVC- Ju
EQUIVALENT TRANSFORMATION TECHNIQUE FOR ISLANDING DETECTION METHODS OF SYNCHRONOUS GENERATOR -REACTIVE POWER PERTURBATION METHODS USING AVR OR SVC- Jun Motohashi, Member, Takashi Ichinose, Member (Tokyo
More informationSPring8菅野印刷.PDF
20021219Spring-8 Ah/kg Ah/dm 3 Li -3.01 540 3860 2090 Na -2.71 970 1160 1140 Al -1.66 2690 2980 8100 Zn -0.76 7140 820 5800 Fe -0.44 7850 960 7500 Cd -0.40 8650 480 4100 Pb -0.13 11340 260 2900 H 2 0
More informationFig. 1 Structure of a Sebaceous Follicle (Ref.1).
Importance and Countermeasures for Sebum Control in Application of Makeup Cosmetics Koichi NOMURA POLA Chemical Industries, Inc., R&D Planning Department 27-1, Takashimadai, Kanagawa-ku, Yokohama 221-0833,
More informationMicrosoft Word - mitomi_v06.doc
MSS mitomi@edm.bosai.go.jp matsuoka@edm.bosai.go.jp yamazaki@edm.bosai.go.jp taniguchi@manage.nitech.ac.jp 1 MSS MSS 2 2 1 m MSS CCT CCT Fig.1 CCT b02-b0 b0-b0b-b b-b1 CCT Landsat/TM MSS S/N 21x21 21x21
More informationSCORE−‹Šp‡Ì”è‹ø‡«Ver3
2 Step 0 Step 1 Step 1 Step 2 Step 3 Step 4 Step 5 Step1 3 Step 2 Step 2-1 Step 2-2 Step3 Step4 Step2 4 5 Step 3 Step 3-1 Step 3-2 Step 3-3 Step5 6 Step 3-4 Step3 Step5 7 8 Step 4 Step 4-1 9 Step4 Step
More informationゼリーこんにゃくの分析
39 Analysis of Jelly Konjac Hiromichi HAYANO, Tsutomu KUMAZAWA Central Customs Laboratory, Ministry of Finance 531, Iwase, Matsudo shi, Chiba Ken, 271 Japan Some properties of so called jelly Konjac have
More informationS-6.indd
Structural Health Monitoring with Fiber Optic Deformation Sensor ( SOFO ) SOFO SOFO ( SOFO V ) ( SOFO Dynamic ) 2 SOFO The fiber optic deformation sensor, SOFO, has excellent characteristics such as ease
More informationuntitled
2 3 WHO (kd ) Lol p 1 grass group? 27 35 Lol p 2? 11 Lol p 3? 11 Lol p 4? 57 Lol p 5? 25 30 Lol p 9? 31 35 Lol p10 12 Lol p11 16 15 How about recent studies? Animal exposure Biomedical tests Questionnaire
More information製紙用填料及び顔料の熱分解挙動.PDF
Thermogravimetric analysis of pigments and fillers for papermaking Toshiharu Enomae Graduate School of Agricultural and Life Sciences Contact e-mail address: enomae@psl.fp.a.u-tokyo.ac.jp A2 350 450 A2
More informationVisual Evaluation of Polka-dot Patterns Yoojin LEE and Nobuko NARUSE * Granduate School of Bunka Women's University, and * Faculty of Fashion Science,
Visual Evaluation of Polka-dot Patterns Yoojin LEE and Nobuko NARUSE * Granduate School of Bunka Women's University, and * Faculty of Fashion Science, Bunka Women's University, Shibuya-ku, Tokyo 151-8523
More informationClay Minerals in the Amakusa Pottery Stones and Some Features of Their Pottery Clays. Surface Charge of Sericite and Dispersion- Coagulation Propertie
Clay Minerals in the Amakusa Pottery Stones and Some Features of Their Pottery Clays. Surface Charge of Sericite and Dispersion- Coagulation Properties of Pottery Clay in Water Hiroshi TATEYAMA, Hideharu
More informationFig. 2 Effect of oxygen partial pressure on interfacial tensions between molten copper and fayalite slag (Fe/Si0 2=1.23) at 1473 K. Fig. s Effect or o
Fig. 1 Schematic diagram of the apparatus for measurements of interfacial tension by sessile drop method. Fig. 2 Effect of oxygen partial pressure on interfacial tensions between molten copper and fayalite
More informationFig. 1 Hydrostatic Thrust Bearing Fig. 2 Point loading of elastic half-space
Characteristics of Hydrostatic Bearing/Seal Parts of Hydraulic Pumps and Motors for Water Hydraulic Systems (2nd Report, Theory) Xiongying WANG, Atsushi YAMAGUCHI In this paper, the characteristics of
More informationMotivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test conditions except for t
Review of Seatbelt Anchorage and Dimensions of Test Bench Seat Cushion JASIC Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test
More information1.7 D D 2 100m 10 9 ev f(x) xf(x) = c(s)x (s 1) (x + 1) (s 4.5) (1) s age parameter x f(x) ev 10 9 ev 2
2005 1 3 5.0 10 15 7.5 10 15 ev 300 12 40 Mrk421 Mrk421 1 3.7 4 20 [1] Grassberger-Procaccia [2] Wolf [3] 11 11 11 11 300 289 11 11 1 1.7 D D 2 100m 10 9 ev f(x) xf(x) = c(s)x (s 1) (x + 1) (s 4.5) (1)
More informationVol.57 No
Title 合併と企業統治 : 大正期東洋紡と大日本紡の比較 Author(s) 川井, 充 Citation 大阪大学経済学. 57(3) P.38-P.72 Issue 2007-12 Date Text Version publisher URL http://hdl.handle.net/11094/17848 DOI Rights Osaka University Vol.57 No.3
More information鉛フリー無電解Niめっき皮膜中の共析物がはんだ実装信頼性に及ぼす影響
Title: 鉛フリー無電解 Ni めっき皮膜中の共析物がはんだ実装信頼性に及ぼす影響 Authors: 土田徹勇起, 大久保利一, 狩野貴宏, 荘司郁夫 Issue Date:2013 年 1 月 20 日 Publisher: 一般社団法人エレクトロニクス実装学会 Citation: エレクトロニクス実装学会誌 Vol.16 No.6(2013)484-491 次ページより本文を掲載致します 論文1.
More informationStructural Studies of Graphite Intercalation Compounds of Fluorine by Transmission Electron Microscopy Tetsuya Isshiki, Fujio Okino, Yoshiyuki Hattori
Structural Studies of Graphite Intercalation Compounds of Fluorine by Transmission Electron Microscopy Tetsuya Isshiki, Fujio Okino, Yoshiyuki Hattori, Shinji Kawasaki and Hidekazu Touhara Department of
More information51-4特-10.indd
技術解説 Quantification of Rust and Prediction of Cracking PWR Metal corrosion was classified into two types general ( or uniform ) corrosion ( rust ) and passive or localized corrosion ( cracking ) based
More informationuntitled
1 2 3 4 5 130mm 32mm UV-irradiation UV-cationic cure UV-cationic cure UV-cationic cure Thermal cationic Reaction heat cure Thermal cationic Cation Reaction heat cure Cation (a) UV-curing of
More informationⅡ 方法と対象 1. 所得段階別保険料に関する情報の収集 ~3 1, 分析手法
67 論文 要旨 : 1507 キーワード : Ⅰ 緒言 65 2014 89 5 2 3 5 6 2 5 6 3 4 3 4 2006 2015 9 9 68 2018. 3 2015 Ⅱ 方法と対象 1. 所得段階別保険料に関する情報の収集 6 2015 7 2016 2 ~3 1,507 2. 分析手法 69 3 3 3 A B C 3 A 4 1 1 2 2 2014 2014 2014 5
More information_14.indd
Thermal Characteristics of Japanese Clothing and Western Clothing Yukari Yogi and Isako Nomiyama Key Words : 13 12 4 5 6 13 10 C 50% 10% 1 1 A A B B A B 1 2 A B 2 A 2 A - 1 + + A - 2 A - 1 A - 3 A - 2
More information特-2.indd
LNG IHI-SPB IHI-SPB Tank for LNG Fueled Ship NO x SO x 3 2015 ECA ( Emission Control Area ) 2 NO x 80 0.1 LNG IHIMU IHI-SPB LNG LNG IHIMU IHI-SPB LNG Much attention is being paid to LNG fueled vessels
More information75 unit: mm Fig. Structure of model three-phase stacked transformer cores (a) Alternate-lap joint (b) Step-lap joint 3 4)
3 * 35 (3), 7 Analysis of Local Magnetic Properties and Acoustic Noise in Three-Phase Stacked Transformer Core Model Masayoshi Ishida Kenichi Sadahiro Seiji Okabe 3.7 T 5 Hz..4 3 Synopsis: Methods of local
More informationFig. 2 Signal plane divided into cell of DWT Fig. 1 Schematic diagram for the monitoring system
Study of Health Monitoring of Vehicle Structure by Using Feature Extraction based on Discrete Wavelet Transform Akihisa TABATA *4, Yoshio AOKI, Kazutaka ANDO and Masataka KATO Department of Precision Machinery
More information*...X Z-.....F.{..
No. 35 (2000) pp.115-124 The Late Quaternary stratigraphy in the western margin of Yodobashi- dai, northern part of Setagaya-ku, Tokyo Jiro KOMORI, Kunihiko ENDO, Fumihiko HASEGAWA, and Sei TAMURA (Received
More information: , , % ,299 9, , % ,
No. 22 March 2013 1. 1 2 3 4 2. 1 2 3. 1 2 2007 : 22 1980 51 1. 1 2008 : 170 4 5 2007 2007 2008 1 2008 6 2,592 205 2,900 0.33% 2009 7 6,299 9,300 238 2,600 0.31% 2010 254 1,700 2008 13.41 191.88 14 2010
More information