00_表紙
|
|
|
- ともなり みやまる
- 6 years ago
- Views:
Transcription
1 PARTS LIST PLATE COMPACTOR MVC-F60/F MIKASA SANGYO CO.,LTD.
2
3 How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part and the old one. XX : Not Interchangeable between new and old. OX : New part is usable for the old machine but the old part is not usable for the new machine. XO : The old part is usable for the new machine but the new part is not usable for the old machine. Note : In case of the lack of interchangeability between the new part and old part,a new part may be used by replacing all other parts found in the assembly. In this case, refer to section 2 for instruction on identifying other parts involved in a new assembly. AD : Newly established(added) DC : Suspended(discontinued) NC : Part number changed QC : Quantity used has been changed NS : Not supplied individually but supplied in an assembly or a group. AS : Special part designed to allow interchangeability between new and old part. CR : Correction Section 2 : Items Found In Remark Column Serial Numbers Where indicated, this indicates a serisl number range (inclusive) where a particular part is used. Model Number Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant. # or : All parts with the same number following # or belong to the same assembly. this part cannot be interchanged individually with any other assemblies to replace an old part (indicated by #), with a new part(indicated by ), then all other parts of that assembly must be replaced with new ones. Note : If more than one of the same reference number is listed, the last one listed indicates newest(or latest)part available. Section 3: Example REF NO. PART NO. PART NAME Q TY MRK REMARKS 457(1) Hinge Metal, Upper/24g #3 (5) 457(2) Hinge Metal, Upper M16 1 OX(3) U1071-(6) 3(7) (1) Old part (2) New part (3) New part usable with old machine, but old part not usable with new machine (reference section 1). (4) Old part number is used through this machine serial number. (5) Old part, used in an assembly with other parts marked with #3. To use this part on a new machine, all other parts in this assembly must be replaced with old ones. (6) New part put into use starting with this serial number and is still current. (7) New part used in an assembly with other parts marked 3, to use this part as a replacement for an old part, all other 3 marked parts must be changed at the same time. Section 4: Items Found In MK2 Column (only for suspended products)! OO ( OO is shown in figure) : The part shown in lower line is supplied.! SD : Not available due to termination of production.! NS : Not supplied individually, but supplied in an assembly or a group.! PD : Supplied as unit product. SS : Not available after stock run out. (The contents of this parts catalog are subject to change without notice.)
4 MVC-F60,F60S,F70 BODY/ 本体 (NEW) 4MS J J F60 / 1-VELT S 1
5 MVC-F60, F60S, F /2/8 BODY / 本体 (NEW) ** 4MS ** REF NO. PART NO. PART NAME 部品名称 Q'TY MRK MK2 REMARKS VIB.PLATE 350B/MVC-F60 散水板付輾圧盤 (350)N/MVC-F60 1 SX *1F60 L VIB.PLATE 420B / MVC-F70 散水板付輾圧盤 (420)/MVC-F70 1 SX *2F70 L S VIBRATING PLATE/F60S 散水装置付輾圧盤 ( 静音型 350)/F60S 1 F60S BASE / MVC-F60 エンジンベース ( ハンドル軸付 )/F60 1! *3F60 L BASE / MVC-F60SERIES ベース /MVC-F60 系共通 1 OO F BASE / MVC-F70 エンジンベース ( ハンドル軸付 )/F70 1 *3F70 L SHOK ABSORBER D45-H41 防振ゴム Φ45X41H 68 /F EARTH WIRE アースワイヤー NUT M10 ナット M SW M10 SW M PW M10 PW M ENGINE AY/GX120U1SM12 エンジン /GX120U1SM12/R60 1 GX120/MQ ENGINE AY/GX120U1SM12 エンジン /GX120U1SM12/R60 1 GX120/EXP ENGINE AY /GX160U1/F80 エンジンAY/GX160U1/80VH 1! GX160/MQ ENGINE AY GX160U1/MVC-88G エンジンAY/GX160U1SMX4 1 GX160/EXP 11 J ENGINE AY EX13 JPN/BLACK エンジンAY/EX , 和文 1 EX13/JPN ENGINE AY EX13 EXP/BL/MM エンジン /EX ,S 付英文 1 EX13/MQ,EXP 11 J ENGINE AY/EX17,JPN エンジンAY/EX17,40081( 和文 ) 1 EX17/JPN ENGINE AY EX17 EXP/BL/MM エンジン /EX ,S 付英文 1 EX17/MQ,EXP BOLT,ENGINE/MVC-F60 エンジン板ボルト /F60/!R172 1 *1F60 L BOLT,ENGINE/MVC-F70 エンジン板ボルト /F70/!R172 1 *2F70 L ENGINE NUT,REAR /MVC-60 エンジンナット ( 後 ) /MVC BOLT 8X40 T ボルト 8x40 T SW M8 SW M PW M8 PW M PW M8 PW M NYLON NUT M8 ナイロンナット M SPACER 18X25X8/CLUTCH スペーサー 18X25X8/ クラッチ 1 F CLUTCH SPACER 20.2X25X9.4 クラッチスペーサー 20.2x25x9.4 1 F CLUTCH AY A1 /65W クラッチ AY /MVR-65W 1 F60/ 1-VELT CLUTCH,SHAFT,A,Y/MVR-65W クラッチシュー A,Y ボス付 /MVR-65 1 F60/ 1-VELT CRUTCH PULLY A1124-S18D クラッチドラム A1124-S18D 1 F60/ 1-VELT STOP RING S-30 ストップリング S 30 1 F60/ 1-VELT STOP RING AR-55 ストップリング AR 55 同芯 1 F60/ 1-VELT BEARING 6006DDU ベアリング 6006DDU 1 F60/ 1-VELT CLUTCH AY/MVC-F60 クラッチAY2 本掛 /MVC-F60/JP 1 AD F60/JPN/2V CLUTCH AY S20-A1-124/EY20 クラッチ AY /MVC-72,EY20 1 F KEY キー 5X35/EY18 1 F KEY キ- 5X5X20 1 F WASHER 9304 ワッシャー BOLT 8X25 T ボルト 8x25 T 1 F BOLT 8X20 T ボルト 8x20 T 1 F SW M8 SW M V-BELT RPF-3310 Vベルト RPF-3310/A V-BELT RPF-3310 Vベルト RPF-3310/A-31 2 AD F60/JPN/2V BELT COVER / MVC-F60,F70 ベルトカバー /F60,F70 1 SX BELT COVER MQ-OR/F60,70 ベルトカバー (MQ)/MVC-F60 1 MQ F60 L BELT COVER MQ-OR/F60,70 ベルトカバー (MQ)/MVC-F60 1 MQ F70 L BOLT 10X35 T ボルト 10x35 T SW M10 SW M PW M10 PW M BELT COVER(IN)/MVC-F60,70 ベルトカバー IN/MVC-F60,F BOLT 10X65 T ボルト 10x65 T SW M10 SW M PW M10 PW M COVER SEAL(E/G)/F60,F70 カバーシール (E/G/MVC-F60 VL NUT M8 ナット M8 2 *1F60 L NUT M8 ナット M8 2 *2F70 L SW M8 SW M8 2 *1F60 L SW M8 SW M8 2 *2F70 L PW M8 PW M8 2 *1F60 L PW M8 PW M8 2 *2F70 L HANDLE /MVC-72 ハンドル /MVC JPN HANDLE LONG / IT,FR,ES,NR ハンドル ロング ( 輸出 黒 )/MVC-60 1 EXP RUBBER 20X32X28.5/52H ゴム ( ハンドル用 )20x32x WASHER 11X35X4.5 ワッシャー 11x35x BOLT 10X20 T ボルト 10x20 T SW M10 SW M RUBBER,HANDLE /MVC-60 ハンドル受ゴム /MVC SOCKET HEAD BOLT 8X45 T 六角穴付ボルト 8x45 T NUT M8 ナット M DECAL, 2V-BELT 銘板,2 本ベルト 1 AD F60/JPN/2V
6 MVC-F60,F70 VIBRATOR/ 起振体 4MJ A
7 MVC-F60, F /2/8 VIBRATOR / 起振体系 ** 4MJ ** REF NO. PART NO. PART NAME 部品名称 Q'TY MRK MK2 REMARKS A VIB.CASE ASSY/F60 起振体 ASSY/MVC-F60 60VL 1 F60,F60VL A VIB.CASE ASSY/F70 起振体 ASSY /MVC-F70 1 F VIBRATING CASE/MVC-F60,70 起振体ケース /MVC-F60,F BOLT 14X45 T ボルト 14x45 T SW M14 SW M PW M14 PW M CASE COVER/PULLEY /F60,70 ベルト側ケースフタ /MVC-F60,F OIL SEAL TC オイルシールTC30458(UE)/MVC CASE COVER/SHUT OFF /F60 反ベルト側ケースフタ /MVC-F PACKING/MVC-F60,F70 パッキン /MVC-F60,F70/TG BOLT 8X20 T ボルト 8x20 T SW M8 SW M COVER SEAL,VIB/F60,70 カバーシール /MVC-F60/ 穴アキ型 1 F60,-VL,F COVER SEAL(VIB.) /MVC-F70 カバーシール /MVC-F70/ 供給中止 1! F ECC.ROTOR SHAFT /MVC-F60 振子軸 /MVC-F60 1 F60,F60VL ECC.ROTOR SHAFT /MVC-F70 振子軸 /MVC-F70 1 F BEARING 6307C4 ベアリング 6307C PULLEY/VIB./F60,70 振子プーリー /F60 F70 φ PULLEY /VIB,F60 振子プーリー 2 本掛 /MVC-F60 1 AD F60/JPN/2V KEY 7X7X30 キー 7x7x WASHER 11X35X4.5 ワッシャー 11x35x BOLT 10X30 T ボルト 10x30 T SW M10 SW M PLUG 1/4X14 10L プラグ 1/4x14 10L PACKING 1/4 (CU) パッキン1/4 (Cu) 1
8 MVC-F60,F70 ACCESSORIES / 装備品 ( フック 散水装置 移動車 ) 4MK
9 MVC-F60,F /2/8 ANCCESSORIES / 装備品 ( フック 散水装置 移動車 ) ** 4MK ** REF NO. PART NO. PART NAME 部品名称 Q'TY MRK MK2 REMARKS GUARD HOOK /MVC-F80,70,60 ガードフック /MVC-F SX BOLT 10X25 H,SW ボルト 10x25 H,SW 付 WATER TANK W/CAP(GR/F60) 水タンク キャップ付 / 国内 / 緑 /F60 1 SX INCL WATER TANK W/CAP(OR,MQ) 水タンク キャップ付 /MQ/ 橙色 /F60 1 SX INCL WATER TANK W/CAP(W,IMER) 水タンク キャップ付 / 仏 / 白 /F SX INCL CAP,WATER TANK(NBR) タンクキャップ (NBR)/MRH,MVC BOLT 10X30 U ボルト 10x30 U WASHER 10.5X21X2 SUS ワッシャー 10.5x21x2 SUS NYLON NUT M10 (SUS) ナイロンナット M10 高型 SUS COCK PT1/4, BH-1211(AL) 水コック PT1/4BH1211 右廻開 AL NUT PS-1/4 PS 1/4 ナット PACKING 11.5X19.5X2 パッキン ( )/F60 1CR PIPE HOLDER (L) /MVC-88 散水管ホルダー ( コック )/MVC-88G 1 SX SPRINKLING PIPE 散水管 /MVC-F60,F70(5 穴 ) BOLT 8X25 T ボルト 8x25 T 1DC FLANGE BOLT 8X25 (SUS) フランジ付六角ボルト 8x25(SUS) 1CR PW M8 PW M8 2DC PW M8 (SUS) PW M8(SUS) 1CR NUT M8 ナット M8 1DC NUT M8 (SUS) ナット M8(SUS) 1CR RUBBER CAP / MVC-F60,F70 散水管ゴムキャップ /MVC-F60,F PACKING,8X15X2T ゴムパッキン CR RUBBER(SPRINKLINK) 散水ゴム /MVC-F70 2 CR F SHAFT/CARRY(350) /F60 移動車軸 (350)/MVC-F60 1 SS! F SHAFT/CARRY(420) /F60,F70 移動車軸 (420)/MVC-F60,F70 1 F PW M18 PW M SPLIT COTTER PIN 3X30 割ピン 3x WHEEL 18X200X50 車輪 φ18x200/ プラ /MVC MT 2 SS! SPRINKLING,PIPE W/RUBBER 散水管 CP( 散水ゴム付 )/F70 1 F70/INCL.121
10 MVC-F60,F70 NAME PLATES / 銘板 4ML
11 MVC-F60,F /2/8 NAME PLATES / 銘板 ** 4ML ** REF NO. PART NO. PART NAME 部品名称 Q'TY MRK MK2 REMARKS PLATE SERIAL NO./F60R/JPN 銘板, 製番 /MVC-F60R( 国内 ) 1 F60/JPN PLATE SERIAL NO./F60S/JPN 銘板, 製番 (MVC-F60S) 国内 1 F60S/JPN PLATE SERIAL NO./F60R/5CO 銘板, 製番 /MVC-F60R( 五カ国語 ) 1 F60R/5COUNT PLATE SERIAL NO./F60H/5CO 銘板, 製番 /MVC-F60H( 五カ国語 ) 1 F60H/5COUNT PLATE SERIAL NO./F70R/5CO 銘板, 製番 /MVC-F70R( 五カ国語 ) 1 F70R/5COUNT PLATE SERIAL NO./F70H/5CO 銘板, 製番 /MVC-F70H( 五カ国語 ) 1 F70H/5COUNT PLATE SERIAL NO./MQ 銘板 製番 ( ランマー用 )/MQ 1 64E/MQ PLATE SERIAL NO./64H/MQ 銘板, 製番 /MVC-64H(MQ) 1 64H/MQ PLATE SERIAL NO./F70/JPN 銘板, 製番 (MVC-F70) 国内 1 F70/JPN PLATE SERIAL NO./70E/MQ 銘板, 製番 /MVC-70E(MQ) 1 70E/MQ PLATE SERIAL NO./70H/MQ 銘板, 製番 /MVC-70H(MQ) 1 70H/MQ EAR PROTECTION LABEL 銘板騒音保護防止 / 和英共通 / 1 JPN DECAL, CAUTION(MANUAL) 銘板, 取扱説明書熟読 ( 和文 ) 1 JPN DECAL,CAUTION(ICON)/R60 銘板 取扱注意 ( 絵文字 )/MVH-R60 1 EXP DECAL, CAUTION 銘板取扱注意 /MT MVC/ 英文 1 MQ DECAL, WITHOUT ENGINE OIL 銘板,E/Gオイルナシ(5ケ国語; 荷札 ) 1 EXP(ROBIN) DECAL,EC NOISE REQ.LWA105 銘板 EC 騒音 LWA105(EU/EXP 1 EU DECAL,MIKASA MARK 125MM 銘板,MIKASAマーク 125MM 1 WATER TANK DECAL, MIKASA MARK 120X60 銘板, 三笠マーク 120x60( 黒 ) 1 WATER TANK DECAL,MQ MARK 71X55 MQ マーク 71x55 1 MQ/W. TANK DECAL, IMER 銘板 イメール社名 1 IMER/W.TANK DECAL, 2V-BELT 銘板,2 本ベルト 1 AD F60/JPN/2V
12 本社大阪支店札幌営業所仙台営業所新潟出張所北関東営業所長野出張所静岡出張所中部営業所金沢営業所中国営業所四国出張所九州営業所南九州出張所沖縄出張所 東京都千代田区猿楽町 1 丁目 4 番 3 号電話 FAX 大阪市西区立売堀 3 丁目 3 番 10 号電話 FAX 札幌市白石区流通センター 6 丁目 1 番 48 号電話 FAX 仙台市若林区卸町 5 丁目 1 番 16 号電話 FAX 新潟市西区小新 2 丁目 16 番 11 号電話 FAX 館林市近藤町 178 番地電話 FAX 長野市稲里町中央 3 丁目 23 番 7 号 E-3 電話 FAX 静岡市駿河区下川原 3 丁目 25 番 51 号 B-101 電話 FAX 名古屋市中村区則武 1 丁目 9 番 4 号電話 FAX 金沢市駅西新町 3 丁目 16 番 30 号電話 FAX 広島市安佐南区祇園 3 丁目 45 番 11 号電話 FAX 高松市今里町 6 番 2 号電話 FAX 福岡市博多区博多駅南 5 丁目 22 番 5 号電話 FAX 鹿児島市宇宿町 2222 番地 6 号 102 電話 FAX 那覇市安謝 1 丁目 18 番 10 号パークサイド M201 号電話 FAX 部品サービスセンター 部品課春日部市緑町 3 丁目 4 番 39 号電話 FAX サービス課春日部市緑町 3 丁目 4 番 39 号電話 FAX 館林物流センター 技術研究所 館林工場 春日部工場
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
01_4UE0_BODY
MVC-T90H MVC-T90H VAS MVC-T90H Product cord 731515 731520 731521 731522 731523 MVC-T90H VAS Product cord 731524 731525 731526 731527 731528 731529 PARTS LIST 403-08801 How to read the marks and remarks
00_表紙
403-05005 MIKASA SANGYO CO.,LTD. 三笠産業株式会社 How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part and the
_MVC-50GB_表紙
403-07801 MIKASA SANGYO CO.,LTD. 三笠産業株式会社 How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part and the
Reservdelskatalog MIKASA MVH-150 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen
Reservdelskatalog MIKASA MVH-150 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
表紙
PARTS LIST HYDRAULIC REVERSIBLE COMPACTOR MVH-150 405-030 MIKASA SANGYO CO.,LTD. How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MT-55 vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
VIBRATING PLATE & VIBRATOR
Reservdelskatalog Maskin & Motor MIKASA MVC-40GB vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se
MFS 2B 2.5B 3.5B OB NO NB 3,000
MFS B.5B 3.5B OB NO.00-105-1 0910 NB 3,000 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors.. Please keep the Parts List updated each time when
MFS 8A3 9.8A3 #026832XE OB NO.002-21051-4 0910 NB 3,400 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors. 2. Please keep the Parts List updated
untitled
OREC ISSUED NO. SP1000-1 Parts catalogue Spider Mower (EXPORT MODEL) SP1000 MODEL CODE SP1000 0202- CONTENTS HANDLE 1-8 DRIVING & CUTTING 9-12 CHAIN CASE 13 TRANSMISSION 14-22 GEAR FRAME 23 FRONT WHEEL
TL140 Book No BT9Z009 S N 21
TL140 Book No. BT9Z009 S/N 21400011- Index TL140 Book No.BT9Z009 Serial No.21400011-3 5 10 6 1 2 4 8 Reference Index ヘ ーシ 0-1 TL140 Book No. BT9Z009 S/N 21400011- How to read the parts manual(1/9) Reference
UT(W1600).indd
UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations
M6B_8B_98B_body.indd
M 6B 8B 9.8B 1. 2. 3. 4. ' 5. 1) """" 6. No. No. 7. "" "" HOW TO USE THIS PARTS LIST 1. This Parts List lists the component parts of the Tohatsu outboard motors. 2. Please keep the Parts List updated
HG…p†[…c…J…^…“…O
HG Hemming guide device Machine models W(T)664 Series / HG Series Parts Catalog INTRODUCTION This parts catalog covers the HG Series device. On pages 2-37, each mechanism is arranged on facing pages, the
05/12/28
PARTS NO.3431 9810 000 05/12/28 05/12/28 NO. PART NO. PART NAME Q'ty DESCRIPTION R/P FROM UP TO SERIAL NO. REMARKS 1 3432 0002 000 ENGINE 1 GR250-E-GCLS-CH1 2 F301 0110 000 NUT 4 M10 3 K814 0110 040 F
W200テンプレート.indd
W200 Small Cylinder Bed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W200 series machine manufactured in January, 2003. The components of W200 series are arranged
C(W)500 AT,TK PB
AT/TK Series Tape cutter (C)W500 WT500 Series (C)W500 WT500 Series Parts Catalog INTRODUCTION This parts catalog covers the (C)W500 WT500 series machine manufactured October, 2001. The components of (C)W500
EB803RT(25)_P Eb_EN.xls
PARTS CATALOG BLOWER 25000001 - P016-001530-13Eb 1. CYLINDER 1 P021-040460 1 CYLINDER ASSY 2 V100-000320 1 GASKET 3 900105-06025 4 BOLT, H.S. 6*25 6*25 4 A200-000420 1 INSULATOR 5 A209-000210 1 BAFFLE
W522.indd
W522 2-Needle flatbed double chainstitch machines Parts Catalog INTRODUCTION This parts catalog covers the W522 series machine manufactured in July, 200. The components of W522 series are arranged according
KSKH(MX).indd
KS/KH Chain cutter device Machine models MX Series Parts Catalog INTRODUCTION This parts catalog covers the KS,KH device which are manufactured in November, 2003. The components are shown on pages 4-7.
EX5100.indd
EX100 EX100 Series Cylinder bedoveredgers Parts Catalog INTRODUCTION This parts catalog covers the EX100 series machine manufactured in December, 200. The components of EX100 series are arranged according
CS-3000_3400(6digits)(35)(36)_CS-3000_3400(6digits)(35)(36)_EN.xls
PARTS CATALOG TOP HANDLE SAW - 36057511 1. Cylinder, Crankcase, Piston 5 100202-39130 1 CRANKCASE SET Sus. by 100202-39131 5 100202-39131 1 CRANKCASE SET CS-3000 5 100202-39530 1 CRANKCASE SET Sus. by
TK-M700…p†[…c…−…X…g
TK Tape cutter device Machine models M700 Series / TK Series Parts Catalog INTRODUCTION This parts catalog covers the TK Series device. On pages 3-12, each mechanism is arranged on facing pages, the first
2006 CBR600RR Parts List K
005CBR600RR.............................................................................................. E........................................... E.............................................. E......................................................................
CPI GTR motor reservedele
CONTENTS-ENGINE GROUP E1 GENERATOR & CRANKSHAFT E2 PISTON & DRIVE FACE STARTER CLUTCH OUTER ASSY E3 GTR-50 CYLINDER E4 CRANKCASE & OIL PUMP & CLUTCH & TRANSMISSION E5 R. CRANK CASE COVER E6 CARBURETOR
ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ
class SCLE HELICOPTER SUPERCOR W-1W ODY KIT INSTRUCTION MNUL SUPERCOR Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive to SUPERCOR.
EXT.indd
EXT Special Parts EXT00 Series Variable top feed safety stitch machines EXT00 Series Variable top feed overedgers Parts Catalog INTRODUCTION This parts catalog covers the EXT series machine manufactured
2/23 ページ ZH8-801 SCREW, SETTING BOLT, FLANGE, 6X Z1V-702ZA STARTER ASSY., RECOIL *NH1* 1 19
1/23 ページ GXV160H2(SFN1) E-11-1 RECOIL STARTER (2) 001 28400-Z1V-013ZA STARTER ASSY., RECOIL *NH1* 1 1915342 002 28410-Z1V-003ZB CASE COMP., RECOIL STARTER *NH1* 1 1915342 002 28410-Z1V-701ZA CASE COMP.,
ÉgÉEÉRÉuÉâï\éÜ
60 class SCLE HELICOPTER TOWCOR H-1SIII ODY KIT INSTRUCTION MNUL TOWCOR 60 Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive
BROTHER INDUSTRIES, LTD. T-8750C-00 5:
T-8750C PARTS BOOK 2 TWIN NEEDLE SPLIT NEEDLE BAR LOCK STITCHER WITH LARGE HOOK Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation.
MB-D100.indd
作成承認印 配布許可印 MB-D100 VAK12201 P A R T S L I S T 修理部品表 Recycled paper 再生紙を使用しています Copyrigh c 2002 by Nikon Corporation. All Rights Reserved. 無断転載を禁ず!! Printed in Japan Jun 2002 G1-17040FSx2 (10) 6C998-547
07_N1A_Setup_Manual_Parts_List
- - -3 -4 -5 -6 -7 -8 -9 -0 - - -3 6 8 9 3 7 0 4 6 7 8 5 9 3 4 0 5-4 -5 -6 - - -3 -4 -5 -6 () () -7 -8 -9 -0 C A D - - -3 -4 -5 -6 -7 -8 -9 -0 - - -3 -4 -5 -6 -7 -8 -9 () () () (3) (4) () () () (3) ()
5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²
PB-2100(6digits)(35)(36)_PB-2100(6digits)(35)(36)_EN.xls
PARTS CATALOG HANDHELD BLOWER 1. Cylinder, Crankcase, Piston 1 101011-06560 1 CYLINDER 1 101011-06561 1 CYLINDER 1 101011-06562 1 CYLINDER 1 A130-000020 1 CYLINDER 1 A130-000021 1 CYLINDER 2 900162-05022
ES-2400_ES-2400_EN.xls
PARTS CATALOG SHRED 'N' VAC 1. Cylinder, Crankcase, Piston 1 101011-08960 1 CYLINDER (CR) 17 101003-08960 1 CYLINDER PISTON KIT 1 + 101011-08961 1 CYLINDER (CR) 5 + 100011-09560 2 RING, PISTON 7 + 100015-04630
1. CYLINDER, PISTON, CRANKSHAFT 1 A CRANKSHAFT,ASM 2 A CYLINDER 3 V GASKET,CYL T:0.5 4 V BOLT,5 5*22 5
PARTS CATALOG TRIMMER 37001001 - P016-002600-15E 1. CYLINDER, PISTON, CRANKSHAFT 1 A011-000301 1 CRANKSHAFT,ASM 2 A130-000850 1 CYLINDER 3 V100-000240 1 GASKET,CYL T:0.5 4 V203-000170 4 BOLT,5 5*22 5 P021-037520
SRM-3150,3600_SRM-3150,3600_EN.xls
PARTS CATALOG GRASS-TRIMMER / BRUSHCUTTER 1. Cylinder, Crankcase, Piston, Fan Cover 4 900162-05020 4 BOLT, H.S. 5*20 5*20 W,SW 5 101034-55630 1 CYLINDER SRM-3150 5 101034-55830 1 CYLINDER Sus. by A130-000601
BROTHER INDUSTRIES, LTD. T-8450C-00 3: 5:
T-8450C PARTS BOOK 2 TWIN NEEDLE SPLIT NEEDLE BAR LOCK STITCHER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/
EJ /October
EJ15 PARTS NO.4105 9810 000 2008/October EJ15-1 2008/October 4105 020A デンソウ ELECTRIC 見出 部品番号 部品名称 個数 型 寸 互 適用号機 備考 換性 NO. PART NO. PART NAME Q'ty DESCRIPTION R/P FROM ~ UP TO SERIAL NO. REMARKS 1 4105
03__H650パーツ(J)__ indd
H0 装置別明細 0009 ENGINE (YANMAR) 000 ENGINE (KUBOTA) 000 HYDRAULIC SYSTEM 000 FRAME 000 COVER 000 SPRINKLER SYSTEM 00 (Y) ELECTRIC SYSTEM (Y) 00 (K) ELECTRIC SYSTEM (K) 000 STEERING HANDLE 00 DECAL 000 SCRAPER
MIDI_IO.book
MIDI I/O t Copyright This guide is copyrighted 2002 by Digidesign, a division of Avid Technology, Inc. (hereafter Digidesign ), with all rights reserved. Under copyright laws, this guide may not be duplicated
材質 形状 Material Shape PA アツチューブ PA Thick-Walled Tube チューブ Tube アツチューブ Thick-Walled Tube PET チューブ PET Tube パーツ No. Part No. 品名 Name 呼称容量 Nominal Volume
材質 形状 Material Shape PA アツチューブ PA Thick-Walled Tube チューブ Tube アツチューブ Thick-Walled Tube PET チューブ PET Tube パーツ No. Part No. 品名 Name 呼称容量 Nominal Volume (ml) サイズ Size (cm) 販売単位 ( 本 / 箱 ) Supply unit (pcs
03-03 Bush Mentori.pdf
54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1
Tab 5, 11 Tab 4, 10, Tab 3, 9, 15Tab 2, 8, 14 Tab 1, 7, 13 2
COMPANION 20 MULTIMEDIA SPEAKER SYSTEM Owner s Guide Tab 5, 11 Tab 4, 10, Tab 3, 9, 15Tab 2, 8, 14 Tab 1, 7, 13 2 Tab1, 7, 13 Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, Tab 5, 11 This product conforms to all
WE WESB WENB WESNB 428
KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always
取扱説明書
ER-LD530 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 1 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 2 3 22 23 1 2 24 25 26 27 1 2 3 28 29 30 31 32 33 34 1 2 3 35 1 2 3 36 37 1 2 3 4 38 39 1 2 3 4 40
W1500_1.indd
W1500 Flatbed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W1500 series machine manufactured in June, 2003. The components of W1500 series are arranged according to
1. CYLINDER, PISTON, CRANKSHAFT 1 A CRANKSHAFT,ASY 2 A CYLINDER 3 V GASKET,CYL 4 V BOLT, TORX 5 TB-5*2
PARTS CATALOG GRASS-TRIMMER / BRUSHCUTTER 37002291 - P014-003141-14C 1. CYLINDER, PISTON, CRANKSHAFT 1 A011-001230 1 CRANKSHAFT,ASY 2 A130-002070 1 CYLINDER 3 V100-000760 1 GASKET,CYL 4 V805-000210 4 BOLT,
P43D-E1-2 2 of 223
COMPONENTS PARTS CATALOG Wheelloader Part No. P43D-E1-2 LX290E Serial No. 1001 to 1499 (except 1080) Front Axle: ZF pn 4474 054 019 MTL3105 Rear Axle: ZF pn 4474 053 019 MTL3095 LX290E-2 Serial No. 1500
w2600.indd
W2600 Cylinderbed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W2600 series machine manufactured in June, 2003. The components of W2600 series are arranged according
WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi
ES-600P Operating Instructions WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing
32720_MR-03_JSCC_CUP
Before beginning assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R MINI-Z Racer MR-03 Chassis Set ASF.4GHz JSCC CUP Edition Thank you for purchasing the Chassis Set
FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.
-temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in
SRM-222ES_L(37)_P Fb_EN.xls
PARTS CATALOG GRASS-TRIMMER / BRUSHCUTTER 37000001 - P014-002030-12Fb 1. CYLINDER, CRANKCASE, PISTON 1 A011-000101 1 CRANKSHAFT,ASM 2 A130-002100 1 CYLINDER 3 101010-44332 1 GASKET, CYL. BASE 4 900162-05022
料理集
ABC Cooking Studio 1 2 3 ABC Cooking Studio ABC Cooking Studio Point Point ABC Cooking Studio Point ABC Cooking Studio ABC Cooking Studio Point
PC_14ZY6_BFT150A_US_ indd
PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any
429
WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B
DM-9_DM-9_EN.xls
PARTS CATALOG DUSTER / MIST BLOWER 1. Piston 2 100000-02411 1 PISTON KIT 2 100000-02412 1 PISTON KIT 1 + 100011-01110 2 RING, PISTON 3 + 100015-00120 2 CIRCLIP, PISTON PIN 4 + 100012-12330 1 BEARING, NEEDLE
SRM-420TES/U
SRM-420TES/U Published:11/24/2016-1 - - A1 - TABLE OF CONTENTS CYLINDER, PISTON, CRANKSHAFT... 1 CRANKCASE... MAGNETO... 5 CLUTCH... 7 AIR CLEANER, CARBURETOR... 9 CARBURETOR... 11 FUEL TANK... 1 MUFFLER...
390SX(37)_P Bb_ _---_EN.xlsx
PARTS CATALOG CHAIN SAW 37001701 - P016-001351-14Bb 1. CYLINDER, MUFFLER 1 P021-040340 1 CYLINDER ASY 2 V100-000750 1 GASKET,CYL 3 900105-05018 4 BOLT, H.S. 5*18 5*18 4 V202-000350 3 BOLT-SPW M4-14 5 A202-000240
Parts list 47
Parts list 7 Code No. 00-37 00-603 00-70 00-8 00-86 00-8 0-8 0-6 0-7 0-8 0-6 0-30 0-30 0-303 0-30 0-30 -080-086 -008 9-003 30-009 X90 Stabilizer bar X90 SSR-IV seesaw pin X3 EX blade spacer SSR-V damper
0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- EU/EX Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin
K02LE indd
I Linear Stage Table of Contents 1. Features... 1 2. Description of part Number... 1 3. Maximum Speed Limit... 2 4. Specifications... 3 5. Accuracy Grade... 4 6. Motor and Motor Adaptor Flange... 4 6-1
00_1512_SLIMLINE_BOOK.indb
PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity
0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin
ECJ-PX50
ECJ-PX50 0.9L This appliance is designed for domestic use in Japan only and cannot be used in any other country. 1 2 3 4 5 6 1 2 3 7 8 1 2 3 4 5 1 2 1 9 3 4 10 1 2 3 11 4 2 4 12 1 2 3 13 1 14 A B B A 15
AT、TK（EX,EXT,LX）.indd
/ Tape cutter device EX3200, EX5200, EX5400, EXT3200 EXT5200, LX3200, LX5200 Series Parts Catalog INTRODUCTION This parts catalog covers the, device which are manufactured in August, 2003. The components
2
NSCP-W61 08545-00U60 2 3 4 5 6 7 8 9 10 11 12 1 2 13 7 3 4 8 9 5 6 10 7 14 11 15 12 13 16 17 14 15 1 5 2 3 6 4 16 17 18 19 2 1 20 1 21 2 1 2 1 22 23 1 2 3 24 1 2 1 2 3 3 25 1 2 3 4 1 2 26 3 4 27 1 1 28
Hello from the Tone Farm Risk of Electric Shock. Do Not Open. No user serviceable parts inside. Replace fuse with same type/rating only. Do not expose to rain or moisture. CAUTION: WARNING: 0123456789ABCDEF
ｨｨ ｨｨ00ｨ ｨｰ0205ｨｹ 09 09ｨ (1000) 1 7ig. 1. Engine in assy (1000)
130509020402 ﾁ010403 03020601060004 06 020306080906 UNITS AND PARTS 01 08ｨｨ09. 1 7ig. No. 01 070604ｨｨ02ｨｨｨｨ ｨｪｨ 08ｨｨ09. Ref. No in 1 7ig. 02ｨ 0604ｨｪｨ ﾂ02ｨｪｨｨ02 0102ｨｰｨ 05ｨｨ (09ｨ 060806 ﾂｨｪ06ｨｦ 0201ｨｨｨｪｨｨ0204)
インターネット接続ガイド v110
1 2 1 2 3 3 4 5 6 4 7 8 5 1 2 3 6 4 5 6 7 7 8 8 9 9 10 11 12 10 13 14 11 1 2 12 3 4 13 5 6 7 8 14 1 2 3 4 < > 15 5 6 16 7 8 9 10 17 18 1 2 3 19 1 2 3 4 20 U.R.G., Pro Audio & Digital Musical Instrument
ご注文の際は部品番号の前に ZR をご記入下さい 10 CRANK CASE GR 1003 20B-10101-21 CRANK CASE CP - 1 STD 1020 044-03500-90 OIL SEAL - 1 1021 060-03502-40 BALL BEARING - 1 35DX72DX17B 1022 X60-01500-11 BALL BEARING - 1 15DX35DX11B
ミッション_1.PDF
- 1/34 ハンドル部 1/6 5 89-1711-060002 平座金 6 13 1.0 2 4 89-1553-060002 Uナット M 6( キャップ付 ) 1 3 89-1113-060402 六角ボルト (8T) M6X40 1 2 0208-12500 伸縮レバースプリング 1 1 0208-12400 ハンドル伸縮レバー CMP 1 2/34 ハンドル部 2/6 12 0208-70510
1. CYLINDER, MUFFLER 1 A CYLINDER 2 V GASKET,CYL 3 V BOLT, TORX 5 TB-5* V GASKET,INTAKE 5 A20
PARTS CATALOG GRASS-TRIMMER / BRUSHCUTTER 37000001-37002091 P014-003150-13Cb 1. CYLINDER, MUFFLER 1 A130-002070 1 CYLINDER 2 V100-000760 1 GASKET,CYL 3 V805-000210 4 BOLT, TORX 5 TB-5*20 12.9 4 V103-001620
1.SRM330ES_RUSSIA_Cover_01.pmd
PARTS CATALOGUE TRIMMER/ BRUSH CUTTER SRM-330ES SRM-330ES 1 Cylinder, Crankcase, Piston 1 X547-000670 1 LABEL,ECHO 2 900162-05020 4 BOLT, H.S. 5*20 3 A130-000630 1 CYLINDER 9 A160-000391 1 COVER,CYLINDER
基本操作ガイド
HT7-0199-000-V.5.0 1. 2. 3. 4. 5. 6. 7. 8. 9. Copyright 2004 CANON INC. ALL RIGHTS RESERVED 1 2 3 1 1 2 3 4 1 2 1 2 3 1 2 3 1 2 3 1 2 3 4 1 2 3 4 1 2 3 4 5 AB AB Step 1 Step
EH092DN8521.xls
Model R 1700i for C A NA DA S pec. No. R A S 17023091 (E H092DN8521) IS S UE E MD-G P 6345 IS S UE DAT E 2006.10 Tableofabbreviations/ 略語一覧 ABBREVIATIONS/ 略語 DESCRIPTION 説明 A AMPERE アンペア AC AIRCLEANER
操作ガイド（本体操作編）
J QT5-0571-V03 1 ...5...10...11...11...11...12...12...15...21...21...22...25...27...28...33...37...40...47...48...54...60...64...64...68...69...70...70...71...72...73...74...75...76...77 2 ...79...79...80...81...82...83...95...98
1. CYLINDER, PISTON, CRANKSHAFT 1 A CRANKSHAFT,ASY 2 A CYLINDER 3 V GASKET,CYL T BOLT, H.
PARTS CATALOG PAS ATTACHMENT 37017937 - P014-000251-14M 1. CYLINDER, PISTON, CRANKSHAFT 1 A011-000434 1 CRANKSHAFT,ASY 2 A130-000761 1 CYLINDER 3 V100-000210 1 GASKET,CYL T0.5 38.1 4 900162-05025 4 BOLT,
エレクトーンのお客様向けiPhone/iPad接続マニュアル
/ JA 1 2 3 4 USB TO DEVICE USB TO DEVICE USB TO DEVICE 5 USB TO HOST USB TO HOST USB TO HOST i-ux1 6 7 i-ux1 USB TO HOST i-mx1 OUT IN IN OUT OUT IN OUT IN i-mx1 OUT IN IN OUT OUT IN OUT IN USB TO DEVICE
A K0-740 () K6-67 () K-9 () B G07- () B00-90 () C K00-88~866 x0~() AF-S VR DX 8-00 / F.-.6G ED JAA7947-R.678.A K () K00-847~87 x0~() K0-74 () J7
作成承認印 JAA7947-R.678.A 配布許可印 サービス計画課 M AF-S VR DX Zoom Nikkor 8-00/.-.6G ED JAA7947 JAA7946 JAA794 (MADE IN JAPAN) (NIKON CORP.JAPAN)) (MADE IN THAILAND) P A R T S L I S T 修理部品表 Printed in Japan Oct 00
VALVE ASSY. (S2) J INLET VALVE J EXHAUST VALVE I RETAINER, VALVE SPRING I SPRING
ZONGSHEN CG-150 ks CYLINDER ASSY. (S1) 1 11226-I008-000086 UPPER COVER, CYLINDER HEAD 1 2 B057890006002870X BOLT M6 28 3 3 B057890006001270X BOLT M6 12 1 4 93301-70621513000 WASHER 6.5 1.5 12 1 5 90103-I008-0000
Tornado Series selection SW TiCN HSS Co FAX VL PM
Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products
Engine for TL120 4TNV84T XTBL
Reference 02 ヘ ーシ 0-2 How to read this Parts Catalog Parts Number ENGINE 4TNV84T-XTBL S/N 21200008-2007.4.4 Reference 01 ヘ ーシ 0-1 CYLINDER BLOCK Fig. 1 GEAR HOUSING Fig. 2 FLYWHEEL HOUSING & OIL SUMP Fig.
*MJ-S100B
MJ-S100B This appliance is designed for domestic use in Japan only and cannot be used in any other country. No servicing is available outside of Japan. !! &' $ $ $ & ' ' %! ! # "!! $ ' !! # ! "!! ! '
操作ガイド（本体操作編）
J-1 QT5-0681-V02 1 m a b c d e f l kj i h g a b c d e f g h i j k l m n n o o s p q r p q r s w t u v x y z t u v w x y z a bc d e f g q p o n m l k j i h a b c d e f g h i j k l {}[] {}[] m n
基本操作ガイド
HT7-0022-000-V.4.0 Copyright 2004 CANON INC. ALL RIGHTS RESERVED 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 4 1 1 2 3 4 5 1 2 1 2 3 1 2 3 1 2 3 1 2 3 4 1 2 3 4 1 2 3 4 5 6 1 2 3 4 5 6 7 1 2 3 4
Series Ref. --0-JUL-/ (CG) CAM PIN, CAM WASHER WASHER, CYLINDRICAL CONTACT ROD ASSY, ROD, GUIDE ROUND, GUIDE ROLLER GUIDE ASSY ROLLER GUIDE,
Series Ref. -0-0-JUL (CG) 0 - - - - - 0 - - - - - CAM PIN, CAM WASHER, CYLINDRICAL CONTACT ROD ASSY, ROD, GUIDE ROUND, GUIDE, GUIDE WASHER (0.MM,.0") WASHER (MM.0") WASHER (.0") ANVIL SET ANVIL MM, 0.")
03-01 Senyouki.pdf
WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06
MJ-H100BX
MJ-H100BX This appliance is designed for domestic use in Japan only and cannot be used in any other country. No servicing is available outside of Japan. ' $ % $ % $ &'! %! %! ! &! " ' # "# $ $ ! $ ' $
*MJ-H100DX
MJ-H100DX This appliance is designed for domestic use in Japan only and cannot be used in any other country. No servicing is available outside of Japan. ' ' $ % $ % & &' & "#!! ! "#! ' # $% " "# ' &! '
NJ-XS10J This appliance is designed for use in Japan only and can not be used in any other country. No servicing is available outside of Japan. a a a a a ba a a a a a a a a 1 2 1 2 3 4 1 2 3 3 4 1
P9-Y1083 DC-645 PARTS CATALOG
PARTS CATALOG SLITTER / CUTTER / CREASER DC- DEC 00 Revision DUPLO DC- P-Y0 Table of Contents . Suction Section MODEL DC- 0 0 0 0 INDEX PARTS No. DESCRIPTION AA0 Bearing 00ZZ-NR AA00 Bearing FZZ CA0