02-03 HSK-AEFC.indb

Size: px
Start display at page:

Download "02-03 HSK-AEFC.indb"

Transcription

1 H S K 267

2 CTSA New Super tite-lock Milling Chuck Slim design milling chuck. Specially designed slits enables heavy endmilling. Multibore tool system HSK40A -CT16SA M5 16, , M5 16, ,000 HS CT20SA M5 14, , M5 12, ,000 HS CT25SA M5 10, ,000 HS HSK50A -CT16SA M5 20, ,000 HS CT20SA M5 18, , M5 17, ,000 HS CT25SA M5 15, ,000 HS HSK63A -CT16SA M8 20, , M8 20, ,000 HS CT20SA M8 18, , M8 18, ,000 HS M8 18, , CT25SA M8 16, , M8 16, ,000 HS M8 15, , CT32SA M8 12, , M8 12, ,000 HS M8 12, , HSK100A -CT16SA M10 12, , M10 12, ,400 HS CT20SA M10 12, , M10 12, , M10 12, ,600 HS M10 12, , M10 12, ,

3 HSK100A -CT25SA M10 12, , M10 12, , M10 12, ,000 HS M10 12, , M10 12, , CT32SA M10 12, , M10 12, , M10 12, ,100 HS M10 12, , M10 12, , CT42SA M10 10, , M10 10, , M10 10, ,100 HS M10 10, , M10 10, , When ordering, indicate number of spanners required. No charge spanners are limited to number of milling chucks on order. 2. Tolerance of cutting tool shank must be h7. 3. Permissible speed is greatly affected by the stiffness of the machine spindle and the balance of the cutting tool. Gradually increase from a low speed, and use at the proper speed. Models with 1-6 cannot be used with some accessories due to short length Multibore tool system HSK63A - CT16SA - 75 HSK63A - CT16SA H 269

4 CTA Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Type3 Multibore tool system HSK40A -CT16A M ,000 HS CT20A M ,000 HS CT25A M ,000 HS HSK50A -CT16A M ,000 HS CT20A M ,000 HS CT25A M ,000 HS HSK63A -CT20A M , M ,000 HS CT25A M , M ,000 HS CT32A M , M ,000 HS HSK100A -CT20A M , M ,400 HS M , CT25A M , M ,800 HS M , CT32A M , M ,900 HS M , CT42A M , M ,900 HS M ,000 1.When ordering, indicate number of spanners required. No charge spanners are limited to number of milling chucks on order. 2. Tolerance of cutting tool shank must be h7. 270

5 Models with 1-5 cannot be used with some accessories due to short length HSK63A - CT16A 75 HSK63A - CT16A 75 - H Multibore tool system 271

6 MC MC 16 -d , MC 20 -d , MC 25 -d , MC 32 -d , MC 42 -d ,560 1.Not applicable for some holder sizes. Please see milling chuck pages. MC-OH MC 16 -d-oh , MC 20 -d-oh , MC 25 -d-oh , MC 32 -d-oh , MC 42 -d-oh ,520 1.Not applicable for some holder sizes. Please see milling chuck pages. Multibore tool system MC-C MC 16 -d-c , MC 20 -d-c , MC 25 -d-c , MC 32 -d-c , MC 42 -d-c ,280 1.Not applicable for some holder sizes. Please see milling chuck pages. MC42-32 MC OH MC C 272

7 MCA MCA MCA MCA MCA MCA MCA 16 -d , MCA 20 -d , MCA 25 -d , MCA 32 -d , MCA 42 -d ,920 1.Not applicable for some holder sizes. Please see milling chuck pages. MCA42-32 HSK-BL HSK40 -BL -L5 M5 P= HSK40A,HSK50A 1, HSK63 -BL -5 M8 P= HSK63A 1, HSK63 -BL -L5 M8 P= HSK63A 1, HSK100 -BL -L5 M10 P= HSK100A 1,800 Multibore tool system Choose right L5 dimension by checking minimum insertion length and shank I.D. depth. HSK63 - BL

8 MA Type 1 Type 2 Not applicable for some holder sizes. Please see milling chuck pages. D MA 16 -MT ~ 32 5, MT ~ 37 5, MT ~ 37 5, MT ~ 37 5, MT ~ 39 5, MT ~ 39 5, MT ~ 39 5, MT ~ 48 5, MT ~ 48 5, MT ~ 48 5, MT ~ 48 5,900 L3 MA16 - MT1 MAB Multibore tool system MAB 16 -MT , MT , MT , MT , MT , MT , MT , MT , MT , MT , MT ,900 Not applicable for some holder sizes. Please see milling chuck pages. MAB16 - MT1 274

9 JA Type 1 Type 2 D JA 16 -JT2S S , JT2S S , JT , JT2S S , JT , JT2S S , JT , JT2S S , JT ,500 L5 Not applicable for some holder sizes. Please see milling chuck pages. JA16 - JT2S JAB JAB 16 -JT2S 16 2S , JT2S 20 2S , JT , JT2S 25 2S , JT , JT2S 32 2S , JT , JT2S 42 2S , JT ,300 Multibore tool system Not applicable for some holder sizes. Please see milling chuck pages. JAB16 - JT2S 275

10 SDM Drill Holder With Easy Tool Length Adjustment Projection length of the cutting tool can be adjusted by simply turning circumference of the holder. Type1 Type2 Type3 Multibore tool system HSK40A -SDM HDP-07A 41, HDP-07A 42, HDP-07A 43, HDP-07A 43, SDM HDP-09 40, HDP-09 41, HDP-09 42, HDP-09 42, SDM HDP-12 44, HDP-12 44, HDP-12 44, HDP-12 46, HDP-12 48, SDM HDP-16 47, HDP-16 47, HDP-16 51, SDM HDP-22 51, HDP-22 53, HDP-22 56, HSK50A -SDM HDP-07A 46, HDP-07A 46, HDP-07A 46, SDM HDP-09 45, HDP-09 45, HDP-09 46, SDM HDP-12 47, HDP-12 47, HDP-12 48, HDP-12 49, HDP-12 50, SDM HDP-16 52, HDP-16 53, HDP-16 54, HDP-16 54, SDM HDP-22 56, HDP-22 59,300 FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L 276

11 HSK63A -SDM HDP-07A 49, HDP-07A 49, HDP-07A 50, HDP-07A 51, HDP-07A 51, SDM HDP-09 49, HDP-09 50, HDP-09 50, HDP-09 51, HDP-09 51, HDP-09 53, SDM HDP-12 50, HDP-12 51, HDP-12 51, HDP-12 52, HDP-12 52, HDP-12 54, SDM HDP-16 54, HDP-16 55, HDP-16 55, HDP-16 56, HDP-16 58, SDM HDP-22 61, HDP-22 61, HDP-22 62, HDP-22 63, HSK100A -SDM HDP-07A 56, HDP-07A 57, HDP-07A 57, HDP-07A 58, HDP-07A 58, HDP-07A 59, SDM HDP-09 56, HDP-09 56, HDP-09 57, HDP-09 58, HDP-09 58, HDP-09 59, SDM HDP-12 57, HDP-12 58, HDP-12 59, HDP-12 59, HDP-12 61, SDM HDP-16 59, HDP-16 61, HDP-16 61, HDP-16 62, HDP-16 63, SDM HDP-22 66, HDP-22 67, HDP-22 67, HDP-22 69, HDP-22 71,300 FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L 1.Collet and spanner are sold separately. 2. is the dimension between the cap end and the preset screw top end. 3.See P. 486 for standard tightening torque. Multibore tool system HSK63A - SDM07-90 HSK63A - SDM H 277

12 HDCA High-Precision Collet Holder Suitable for drilling, reaming and fi nish endmilling. Type1 Type2 Type3 Multibore tool system HSK40A -HDC07A HDP-07A ,700 (22 ~ 24) HDP-07A , HDP-07A , HDP-07A , HDP-07A , HDC09A HDP , HDP , HDP , HDP , HDP , HDC12A HDP , HDP , HDP , HDP , HDC16A ( ~ 37) HDP , HDP ,300 (38 ~ 51) HDP , HDP , HDC22A HDP , HDP , HDP , HSK50A -HDC07A HDP-07A , HDP-07A , HDP-07A , HDC09A HDP , HDP , HDP , HDC12A HDP , HDP , HDP , HDC16A HDP ,500 (38 ~ 47) HDP , HDP , HDC22A HDP , HDP , HDP ,500 FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC-22 S-1L S-3L S-4L S-5L 278

13 HSK63A -HDC07A HDP-07A , HDP-07A , HDP-07A ,000 FDC-07 S HDP-07A , HDP-07A , HDC09A ( ~ 31) 26 HDP , HDP , HDP ,000 FDC-09 S-1L HDP , HDP , HDC12A HDP , ( ~ 45) 32 HDP , HDP ,000 FDC-12 S-3L HDP , HDP , HDP , HDC16A HDP , ( ~ 45) 36 HDP , HDP ,000 FDC-16 S-4L HDP , HDP , HDP , HDC22A HDP , HDP , HDP ,000 FDC-22 S-5L HDP , HDP , HSK100A -HDC07A HDP-07A , HDP-07A , HDP-07A ,000 FDC-07 S HDP-07A , HDP-07A , HDC09A HDP , HDP , HDP , HDP , HDP , HDC12A HDP ,000 (33 ~ 38) HDP , HDP , HDP , HDP , HDC16A HDP ,200 (38) HDP , HDP , HDP , HDP , HDC22A HDP , HDP , HDP , HDP , HDP , Collet, spanner, hexagon head preset screw, preset screw for semi-dry processing are sold separately. Standard preset screw is included. 2. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets (OH,C or MS). 3. L3 indicates dimension when using with a preset screw. The value within () indicates the value when using a preset screw with a hex hole (sold separately). 4. See P. 486 for standard tightening torque. FDC-09 FDC-12 FDC-16 FDC-22 HSK63A - HDC09A- 90 S-1L S-3L S-4L S-5L HSK63A - HDC09A H Multibore tool system 279

14 GDCA High-Precision Collet Holder ( High-Balanced Type ) Suitable for high speed rotation drilling, reaming, and fi nish endmilling. Type1 Type2 Multibore tool system HSK40A -GDC07A HDP-07A , HDP-07A 42,500 FDC-07AA S HDP-07A 43, GDC09A GDP , GDP-09 41,500 FDC-09AA S GDP-09 42, GDC12A GDP , GDP ,500 FDC-12AA FK GDP-12 48, GDC16A GDP , GDP-16 47,500 FDC-16AA FK GDP , GDC22A GDP-22 51,000 FDC-22AA FK GDP-22 56, HSK50A -GDC07A HDP-07A 45, HDP-07A 46,000 FDC-07AA S HDP-07A , GDC09A GDP , GDP ,500 FDC-09AA S GDP , GDC12A GDP , GDP ,000 FDC-12AA FK GDP , GDC16A GDP , GDP ,000 FDC-16AA FK GDP , GDC22A GDP ,000 FDC-22AA FK GDP ,

15 HSK63A -GDC07A HDP-07A , HDP-07A ,500 FDC-07AA S HDP-07A , GDC09A GDP , GDP ,500 FDC-09AA S GDP , GDC12A GDP , GDP ,500 FDC-12AA FK GDP , GDC16A GDP , GDP ,000 FDC-16AA FK GDP , GDC22A GDP , GDP ,500 FDC-22AA FK GDP , HSK100A -GDC07A HDP-07A , HDP-07A ,000 FDC-07AA S HDP-07A , GDC09A GDP , GDP ,000 FDC-09AA S GDP , GDC12A GDP , GDP ,500 FDC-12AA FK GDP , GDC16A (38) GDP , GDP , GDP , GDC22A GDP , GDP , GDP ,000 FDC-16AA FK-0034 FDC-22AA FK Collet, preset screw and spanner are sold separatey. 2. Always use "AA" class collet. 3. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets (OH,C or MS). 4. "L3" indicates dimension when using with a preset screw. The value within () indicates the value when using a preset screw with a hex hole (sold separately). 5. See P. 486 for standard tightening torque. Multibore tool system HSK63A - GDC07A - 90 HSK63A - GDC07A H 281

16 ERC Collet Holder For Small Diameters For drilling in tight space HSK40A -ERC ~ ERP , ~ ERP ,500 (0 ~ 2.4) (19 ~ 31) ER8 S-8E ~ (0 ~ 2.4) (19 ~ 31) 12 ERP , ERC11S ~ ~ 4 22 ~ ERP-11S , ~ ~ 4 22 ~ ERP-11S ,000 FDC-07 S-11E ~ ~ 4 22 ~ ERP-11S , HSK50A -ERC ~ (0 ~ 2.4) (19 ~ 30) 12 ERP , ~ (0 ~ 2.4) (19 ~ 31) 12 ERP ,800 ER8 S-8E ERC11S ~ ~ 4 22 ~ ERP-11S , ~ ~ 4 22 ~ ERP-11S ,600 FDC-07 S-11E HSK63A -ERC ~ ERP ,600 (0 ~ 2.4) (19 ~ 28) ~ ERP ,000 (0 ~ 2.4) (19 ~ 31) ER8 S-8E ERC11S ~ ~ 4 22 ~ ERP-11S , ~ ~ 4 22 ~ ERP-11S ,700 FDC-07 S-11E Multibore tool system 1. Collet and spanner are sold separately. 2. ES8, a preset screw for ERC8, is sold separately. ERC11S includes a standard preset screw HDS-07A-ES " B " and "L2 " dimensions in brackets are for using ES8 preset screw. 4. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets. 5. See P. 486 for standard tightening torque. HSK63A - ERC8-75 HSK63A - ERC H 282

17 ERC-T Collet Holder For Small Diameters ( Taper Type ) For drilling in tight space HSK40A -ERC8-60T 0.5 ~ ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP ,800 ER T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , ERC11S -60T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S ,600 FDC T 0.5 ~ ~ 4 22 ~ ERP-11S , HSK50A -ERC8-75T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 30) ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP ,800 ER T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , ERC11S -75T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S ,600 FDC T 0.5 ~ ~ 4 22 ~ ERP-11S , HSK63A -ERC8-60T 0.5 ~ ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 28) ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP ,000 ER T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , T 0.5 ~ (0 ~ 2.4) 34 (19 ~ 31) ERP , ERC11S -60T 0.5 ~ ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S ,700 FDC T 0.5 ~ ~ 4 22 ~ ERP-11S , T 0.5 ~ ~ 4 22 ~ ERP-11S , Collet and spanner are sold separately. 2. ES8-T, a preset screw for ERC8, is sold separately. ERC11S-T includes a standard preset screw HDS-07A-ES " B " and "L2 " dimensions in brackets are for using ES8 preset screw. 4. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets. 5. See P. 486 for standard tightening torque. HSK63A - ERC8-75T S-8E S-11E S-8E S-11E S-8E S-11E HSK63A - ERC8-75T - H Multibore tool system 283

18 MEMO 284

19 CTZ SA New "R"Zero Holder for Large Diamater Runout of the cutting edge can be adjusted as close as to zero.suitable for large diameter reaming. Caution : Please rotate the clamping ring counterclockwise more than 360 degrees after a cutting tool is removed HSK63A -CTZ25SA M8 P= ,000 58, M8 P= ,000 60,000 HS CTZ32SA M8 P= ,000 61, M8 P= ,000 63,000 HS HSK100A -CTZ25SA M10 P= ,500 71, M10 P= ,500 73,000 HS CTZ32SA M10 P= ,000 75, M10 P= ,000 78, CTZ42SA M10 P= ,000 83, M10 P= ,000 89, When ordering, indicate number of spanners required. No charge spanners are limited to number of holders on order. 2. A wrench is included. 3. The model with 1 and 2 are not compatible with some accessories. For more information about the accessories, please refer below chart. 4. Tolerance of cutting tool shank must be h7. 25,32,42 50 HS-3-32 HS-4-42 Models with 1-2 cannot be used with some accessories due to short length. 6, , , L-6L (Included) HSK63A - CTZ32SA HSK63A - CTZ32SA H Multibore tool system 285

20 HDZ "R"Zero Holder Runout accuracy of the cutting edge can be adjusted as closely as to zero. Type1 Type2 Multibore tool system HSK40A -HDZ HDP-07A 43, HDP-07A 44,500 FDC-07 S-0 L-3T HDP-07A , HDZ HDP ,500 FDC HDP-09 44,500 S-1L L-3T HDZ HDP , HDP ,500 FDC-12 S-3L L-4T HDP-12 50, HDZ (38 ~ 51) HDP ,000 FDC-16 S-4L L-4T HDP , HDP-16 53, HSK50A -HDZ HDP-07A 47, HDP-07A ,000 FDC-07 S-0 L-3T HDP-07A , HDZ HDP-09 46, HDP ,000 FDC-09 S-1L L-3T HDP , HDZ HDP , HDP ,000 FDC-12 S-3L L-4T HDP , HDZ (38 ~ 47) HDP ,500 FDC-16 S-4L L-4T HDP , HDP ,

21 HSK63A -HDZ HDP-07A , HDP-07A 51,500 FDC-07 S-0 L-3T HDP-07A 52, HDZ (27 ~ 31) HDP , FDC-09 S-1L L-3T HDP , HDP-09 52, HDZ (33 ~ 45) HDP , FDC-12 S-3L L-4T HDP , HDP , HDZ (38 ~ 45) HDP , HDP ,500 FDC-16 S-4L L-4T HDP , HDZ22A HDP ,500 FDC HDP ,500 S-5L L-6T HSK100A -HDZ HDP-07A 57, HDP-07A 58,500 FDC-07 S-0 L-3T HDP-07A 59, HDZ HDP-09 57, (27 ~ 44) HDP ,500 FDC-09 S-1L L-3T HDP-09 59, HDZ (33 ~ 38) HDP , FDC-12 S-3L L-4T HDP-12 60, HDP , HDZ (38) HDP , FDC-16 S-4L L-4T HDP-16 62, HDP-16 63, HDZ22A HDP , HDP ,000 FDC-22 S-5L L-6T HDP-22 70, Collet, spanner, hexagon head preset screw, preset screw for semi-dry processing, and adjustment wrench are sold separately. Standard preset screw is included. 2. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets (OH,C or MS). 3. "L1" indicates dimension when using with a preset screw. The value within () indicates the value when using a preset screw with a hex hole (sold separately). 4. See P. 486 for standard tightening torque. Multibore tool system HSK63A - HDZ12-90 HSK63A - HDZ H 287

22 GDZ "R"Zero Holder ( High-Balanced Type ) Runout accuracy of the cutting edge can be adjusted as closely as to zero. (High-balanced type) Type1 Type2 Type3 Multibore tool system HSK40A -GDZ HDP-07A 42, HDP-07A ,000 FDC-07AA S-0 L-3T HDP-07A 44, GDZ GDP-09 44, GDP-09 45,500 FDC-09AA S-0 L-3T GDP-09 46, GDZ GDP-12 49, GDP-12 50,000 FDC-12AA FK-0034 L-4T GDP-12 52, GDZ GDP-16 49, GDP-16 50,500 FDC-16AA FK-0034 L-4T GDP-16 52, HSK50A -GDZ HDP-07A 50, HDP-07A 51,000 FDC-07AA S-0 L-3T HDP-07A 51, GDZ GDP-09 51, GDP-09 53,500 FDC-09AA S-0 L-3T GDP-09 54, GDZ GDP-12 55, GDP-12 57,000 FDC-12AA FK-0034 L-4T GDP-12 59, GDZ GDP-16 58, GDP-16 59,000 FDC-16AA FK-0034 L-4T GDP-16 61,

23 HSK63A -GDZ HDP-07A , HDP-07A ,000 FDC-07AA S-0 L-3T HDP-07A 53, GDZ GDP , GDP ,500 FDC-09AA S-0 L-3T GDP , GDZ GDP , GDP-12 59,000 FDC-12AA FK-0034 L-4T GDP-12 61, GDZ GDP , GDP ,000 FDC-16AA FK-0034 L-4T GDP-16 63, GDZ22A GDP , GDP-22 66,000 FDC-22AA FK-0045 L-6T HSK100A -GDZ HDP-07A 63, HDP-07A 64,000 FDC-07AA S-0 L-3T HDP-07A 65, GDZ GDP-09 63, GDP-09 64,000 FDC-09AA S-0 L-3T GDP-09 65, GDZ GDP-12 70, GDP-12 70,500 FDC-12AA FK-0034 L-4T GDP-12 73, GDZ GDP-16 70, GDP-16 71,000 FDC-16AA FK-0034 L-4T GDP-16 73, GDZ22A GDP-22 70, GDP-22 71,500 FDC-22AA FK-0045 L-6T GDP-22 73, Collet, preset screw, spanner and adjustment wrench are sold separatey. 2. Always use AA class collet. 3. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets (OH,C or MS). 4. "L3" indicates dimension when using with a preset screw. 5. See P. 486 for standard tightening torque. Multibore tool system HSK63A - GDZ07-90 HSK63A - GDZ H 289

24 ERZ "R"Zero Holder For Small Diameters Holder with runout adjustment mechanism. Suitable for drilling in tight space. Multibore tool system HSK40A -ERZ ~ (0~3.1) 33 (19~29) ERP-8 54, ~ (0~3.1) 33 (19~29) ERP-8 54, ~ (0~3.1) 33 (19~29) ERP-8 54, ERZ11S ~ ~4 22~ ERP-11S 52, ~ ~4 22~ ERP-11S 53, ~ ~4 22~ ERP-11S 53, HSK50A -ERZ ~ (0~3.1) 33 (19~28) ERP-8 55, ~ (0~3.1) 33 (19~29) ERP-8 56, ~ (0~3.1) 33 (19~29) ERP-8 56, ERZ11S ~ ~4 22~ ERP-11S 54, ~ ~4 22~ ERP-11S 54, ~ ~4 22~ ERP-11S 54, HSK63A -ERZ ~ (0~3.1) 33 (19~26) ERP-8 53, ~ (0~3.1) 33 (19~29) ERP-8 54, ~ (0~3.1) 33 (19~29) ERP-8 54, ERZ11S ~ ~4 22~ ERP-11S 52, ~ ~4 22~ ERP-11S 52, ~ ~4 22~ ERP-11S 53, Collet,spanner and adjustment wrench are sold separately. 2. ES8, a preset screw for ERZ8, is sold separately. ERZ11S includes a standard preset screw HDS-07A-ES " B " and " L2 " dimensions in brackets are for using ES8 preset screw. 4. Refer to P. 092 for minimum tool insertion length in case of using our coolant collets. 5. See P. 486 for standard tightening torque. ER8 S-8E L-3T FDC-07 S-11E L-3T ER8 S-8E L-3T FDC-07 S-11E L-3T ER8 S-8E L-3T FDC-07 S-11E L-3T HSK63A - ERZ8-75 HSK63A - ERZ H 290

25 PHZS Slim Hydro "R" Zero Holder Slim Hydro Chuck with "R" zero runout adjustment function. Suitable for high precision cutting in a deep/narrow hole. Type1 Type2 Type3 Max. min HSK40A -PHZ06S , , PHZ07S , , PHZ08S , , PHZ09S , , PHZ10S , , PHZ11S , , PHZ12S , , HSK63A -PHZ06S , , , , PHZ07S , , , , PHZ08S , , , , PHZ09S , , , , PHZ10S , , , , PHZ11S , , , , PHZ12S , , , , HSK100A -PHZ06S , , , , PHZ07S , , , , PHZ08S , , , , PHZ09S , , , , PHZ10S , , , , PHZ11S , , , , PHZ12S , , , ,000 L-4T L-4T L-4T Tool shank diameter tolerance must be within h6. Permissible speed is greatly affected by the stiffness of the machine spindle and the balance of the cutting tool. Gradually increase from a low speed, and use at the proper speed. HSK63A - PHZ06S HSK63A-PHZ06S H L-3T-S L-3T-S L-3T-S Multibore tool system 291

26 PHC H Hydro Chuck Ω High Rigidity Hydro Chuck is the best holder for high effi ciency rough machining. New Multibore tool system Code Model 1. Tool shank diameter tolerance must be within h7. h6 or 0/-0.01 tolerance is recommended when newly making a cutting tool. 2. PHC20H and PHC32H have pin holes for collet with stopper pin on its body. 3. Permissible speed is greatly affected by the stiffness of the machine spindle and the balance of the cutting tool. Gradually increase from a low speed, and use at the proper speed. Type d L L1 D1 D2 D3 L0 Max. min -1 kg HSK63A -PHC16H H , PHC20H H , L-4T PHC25H H , PHC32H H , L-5T H , HSK100A -PHC16H H , PHC20H H , L-4T PHC25H H , H , PHC32H H , L-5T H , PHC42H H , L-6T HSK63A - PHC16H H 292

27 HSK-BL HSK63 -BL - 5 M8 P= HSK63A 1, HSK63 -BL - L5 M8 P= HSK63A 1, HSK100 -BL - L5 M10 P= HSK100A 1, Choose right L5 dimension by checking minimum insertion length and shank I.D. depth. 2. Stopper bolts cannot be used with HSK63A-PHC32H-105 or HSK100A-PHC32H-110. HSK63 - BL - 15 Multibore tool system 293

28 PHC A Power Hydro Chuck Hydro chuck with collet holder fl exibility. Suitable for high precision cutting. Type1 Coolant tube Type2 Coolant tube Type3 Stopper bolt Multibore tool system Coolant tube d L L1 D1 D2 D3 L HSK40A -PHC03A , , PHC04A , , PHC06A , , PHC07A , , PHC08A , , PHC09A , , PHC10A , , PHC11A , ,400 L-4T PHC12A , , PHC13A , , PHC14A , , PHC15A , , PHC16A , , PHC20A , , PHC25A , ,500 L-6T HSK50A -PHC03A , , PHC04A , , PHC06A , , PHC07A , , PHC08A , , PHC09A , , PHC10A , , PHC11A , ,400 L-4T PHC12A , , PHC13A , , PHC14A , , PHC15A , , PHC16A , , PHC20A , , PHC25A , ,500 L-6T HSK63A -PHC03A , , PHC04A , , PHC06A , , , , PHC07A , , , , PHC08A , ,800 L-4T , , PHC09A , , , , PHC10A , , , ,

29 d L L1 D1 D2 D3 L HSK63A -PHC11A , , , , PHC12A , , , , PHC13A , , , , PHC14A , , , , PHC15A , , , , PHC16A , , , , PHC20A , , , , PHC25A , , , , PHC32A , , , , HSK100A -PHC06A , , , , , , PHC07A , , , , , , PHC08A , , , , , , PHC09A , , , , , , PHC10A , , , , , , PHC11A , , , , , , PHC12A , , , , , , PHC13A , , , , , , PHC14A , , , , , , PHC15A , , , , , , PHC16A , , , , , , PHC20A , , , , , , PHC25A , , , , PHC32A , , , ,000 L-4T L-6T L-4T L-4T L-6T 1. Cutting tool shank must be within tolerances specifi ed below ; Shank diameter less than 6mm : Within h6 tolerance Shank diameter 6mm and over : Within h7 tolerance h6 or 0/-0.01 tolerance is recommended when newly making a cutting tool. 2. PHC12A and PHC20A have pin holes for collet with stopper pin on its body. 3. Permissible speed is greatly affected by the stiffness of the machine spindle and the balance of the cutting tool. Gradually increase from a low speed, and use at the proper speed. Multibore tool system HSK63A -PHC12A- 120 HSK63A-PHC12A H 295

30 PHCS Slim Hydro Chuck Perfect choice for tight space applications, such as endmill fi nishing, drilling and reaming on 5-axis machines. Type1 Coolant tube Type2 Coolant tube Multibore tool system HSK40A -PHC03S , , , , PHC04S , , , , PHC06S , , , , , , PHC07S , , , , , , PHC08S , , , , , , PHC09S , , , , , , PHC10S , , , , , , PHC11S , , , , , , PHC12S , , , , , , HSK50A -PHC03S , , , , PHC04S , , , , PHC06S , , , , , , PHC07S , , , , , , PHC08S , , , , , , PHC09S , , , , , , PHC10S , , , , , , PHC11S , , , , , , PHC12S , , , , , , HSK63A -PHC03S , , , , PHC04S , , , , PHC06S , , , , , , , ,000 L-4T L-4T L-4T 296

31 HSK63A -PHC07S , , , , , , , , PHC08S , , , , , , , , PHC09S , , , , , , , , PHC10S , , , , , , , , PHC11S , , , , , , , , PHC12S , , , , , , , , PHC16S , , , , , , PHC20S , , , , , , PHC25S , , , , , , HSK100A -PHC06S , , , , , , , , PHC07S , , , , , , , , PHC08S , , , , , , , , PHC09S , , , , , , , , PHC10S , , , , , , , , PHC11S , , , , , , , , PHC12S , , , , , , , , PHC16S , , , , , , PHC20S , , , , , , PHC25S , , , , , , Tool shank diameter tolerance must be within h6. 2. Permissible speed is greatly affected by the stiffness of the machine spindle and the balance of the cutting tool. Gradually increase from a low speed, and use at the proper speed. L-4T L-6T L-4T L-6T Multibore tool system HSK63A -PHC12S- 135 HSK63A-PHC12S H 297

32 HC Compact Hydraulic Chuck High precision hydraulic chuck with stable repeated runout accuracy. Type1 Type2 Multibore tool system HSK40A -HC , HC , HC , HC ,000 L-4T HC , HC , HSK50A -HC , HC , HC , HC ,000 L-4T HC , HC , HSK63A -HC , HC , HC , HC ,000 L-4T HC , HC , HC ,000 L-6T HSK100A -HC , HC , HC , HC ,000 L-4T HC , HC , HC ,000 L-6T 1.Please use cutting tool with smaller tolerance than h7. Tolerance within is recommended in case newly making cutting tools. 2. Never operate clamp bolt without cutting tool in the chuck, otherwise the chuck will be damaged. HSK63A - HC12-90 HSK63A - HC H 298

33 SRE Shrink Fit ( Small Diameter Type ) Shrinkage method sets a cutting tool fi rmly by heating and cooling the chuck. High precision and strong chucking. (Small diameter type) Type1 Type2 Type HSK40A -SRE3A , , , , , , SRE4A , , , , , , SRE5A , , , , , , SRE6A , , , , , , SRE8A , , , , , , HSK50A -SRE3A , , , , , , SRE4A , , , , , , SRE5A , , , , , ,200 Multibore tool system 299

34 Multibore tool system HSK50A -SRE6A , , , , , , SRE8A , , , , , , HSK63A -SRE3A , , , , , , SRE4A , , , , , , SRE5A , , , , , , SRE6A , , , , , , SRE8A , , , , , , HSK100A -SRE3A , , , , SRE4A , , , , SRE5A , , , , SRE6A , , , , SRE8A , , , , Center through coolant is not possible with SRE3A and SRE4A. 2. Always use carbide shank tools with h6 tolerance. ISG NT coil is necessary in case of heating SRE chucks with ISG3400. HSK63A - SRE6A - 90 HSK63A - SRE6A H 300

35 SRK Shrink Fit ( Heavy Type ) Shrinkage method sets a cutting tool fi rmly by heating and cooling the chuck. High precision, rigidity and strong chucking. (Heavy Type) HSK40A -SRK6A , SRK8A , SRK10A , SRK12A , SRK16A , HSK50A -SRK6A , SRK8A , SRK10A , SRK12A , SRK16A , SRK20A , HSK63A -SRK6A , SRK8A , SRK10A , SRK12A , SRK16A , SRK20A , SRK25A , HSK100A -SRK6A , SRK8A , SRK10A , SRK12A , SRK16A , SRK20A , SRK25A , SRK32A ,000 Always use carbide shank tools with h6 tolerance. ISG coil is necessary in case of heating SRE32 chucks with ISG3400. Multibore tool system HSK63A - SRK6A - 80 HSK63A - SRK6A H 301

36 SRD Shrink Fit ( DIN Standard ) Shrinkage method sets a cutting tool fi rmly by heating and cooling the chuck. High precision, rigidity and strong chucking. (DIN Type) Multibore tool system HSK40A -SRD6A , , , SRD8A , , , SRD10A , , , SRD12A , , , SRD14A , , , SRD16A , , , HSK63A -SRD6A , , , SRD8A , , , SRD10A , , , SRD12A , , , SRD14A , , , SRD16A , , , SRD18A , , , SRD20A , , SRD25A , , SRD32A , ,

37 HSK100A -SRD6A , , , SRD8A , , , SRD10A , , , SRD12A , , , SRD14A , , , SRD16A , , SRD18A , , SRD20A , , SRD25A , , SRD32A , ,000 Always use carbide shank tools with h6 tolerance. HSK63A - SRD10A HSK63A - SRD10A H Multibore tool system 303

38 SRS Shrink Fit ( Slim Type ) Shrinkage method sets a cutting tool fi rmly by heating and cooling the chuck. High precision and strong chucking. (Slim Type) Multibore tool system HSK40A -SRS6A , , SRS8A , , SRS10A , , SRS12A , , SRS16A , , HSK50A -SRS6A , , SRS8A , , SRS10A , , SRS12A , , SRS16A , , SRS20A , , HSK63A -SRS6A , , , SRS8A , , , SRS10A , , , SRS12A , , , SRS16A , , , SRS20A , , ,

39 Always use carbide shank tools with h6 tolerance HSK100A -SRS6A , , , SRS8A , , , SRS10A , , , , SRS12A , , , , SRS16A , , , , SRS20A , , , ,000 HSK63A - SRS12A ISG3400 SRK-HA1,HB2 HSK63A - SRS12A H Multibore tool system 305

40 STM Synchronous Tap Holder With Easy Tool Length Adjustment Projection length of the cutting tool can be adjusted by simply turning circumference of the holder. Type1 Type2 Type3 Tap sizes are based on old JIS standard. NOTENut O.D. of STM8 is 19mm. Multibore tool system HSK40A -STM KDP , KDP , KDP ,500 FDC-07 STS KDP , STM HTP-09 36, HTP-09 36, HTP-09 36,500 FSC-09 STS-12 S-1L HTP-09 36, STM HTP , HTP-16 37, HTP-16 37,500 FSC-16 STS-18 S-4L HTP-16 37, HSK50A -STM KDP , KDP , KDP ,600 FDC-07 STS KDP , STM HTP , HTP ,600 FSC-09 STS-12 S-1L HTP-09 36, STM HTP , HTP , HTP ,600 FSC-16 STS-18 S-4L HTP-16 37, HSK63A -STM KDP , KDP , KDP , KDP , KDP , KDP ,600 FDC-07 STS STM HTP , HTP , HTP , HTP , HTP , HTP ,800 FSC-09 STS-12 S-1L STM HTP , HTP , HTP ,000 FSC-16 STS-18 S-4L HTP , HTP-16 38, STM HTP , HTP-22 42, HTP-22 43,100 FSC-22 STS-30 S-5L HTP-22 43, HSK100A -STM KDP , KDP , KDP , KDP , KDP , KDP ,900 FDC-07 STS HSK100A -STM HTP-09 42, HTP , HTP-09 42, HTP-09 43, HTP-09 43, HTP-09 43,900 FSC-09 STS-12 S-1L 17mm Flat 17mm width 17mm Flat 17mm width 17mm Flat 17mm width 17mm Flat 17mm width 306

41 STM HTP , HTP-16 43, HTP-16 43,900 FSC-16 STS-18 S-4L HTP-16 44, HTP-16 44, STM HTP , HTP-22 48, HTP-22 49,100 FSC-22 STS-30 S-5L HTP , HTP , Collet, spanner and preset driver are sold separatey. 2. Please see below for l1 dimension. For models with, please see l1row in the below chart. 3. Tap holes smaller than M4 can be made by STM8. Collets to be used are as follows. M1-M2.6: FDC M3-M3.5: FDC Tap drive will not be used for the above usages. HSK63A - STM12-90 M4~6 U No.8~1/4 21~35 21~26 M7~12 U 5/16~U7/16 23~37 23~28 PT1/8 M13~15 U 1/2~5/8 28~42 - PT1/4 M16~17 32~45 - M18~27 U 3/4~U1 33~47 - PT3/8~5/8 M30 U1-1/8 PT3/4 38~52 - M46 U No.81/ M78 U5/ M46 U No.81/ M710 U 5/163/ M1112 U 7/ PT 1/8 U1/ M1315 U9/ U5/8 PT1/ M M18 U 3/ PT3/8 M2021 PT1/ M22 U 7/ M M2425 PT5/ M2627 U M M30 PT3/ U 1-1/ HSK63A - STM H M M M M M M M M M M M M6 M M10 M M M M M M Multibore tool system 307

42 STP Synchro Tapping Chuck Quick-changeable tap adapter. STP STC ( Option) WE ( Option) WENB ( Option) Tap sizes are based on old JIS standard. Multibore tool system HSK40A -STP ,000 STC WEN1B M3 M12 M3 M10 PIPEPT,PS,PF1/ ,000 WE HSK50A -STP ,000 STC WEN1B M3 M12 M3 M10 PIPEPT,PS,PF1/ ,000 WE STP ,000 STC PIPEPT,PS,PF1/8 WEN2B M8 M20 M8 M14 PIPEPT,PS,PF1/ ,000 WE PIPEPT,PS,PF3/ HSK63A -STP ,000 STC WEN1B M3 M12 M3 M10 PIPEPT,PS,PF1/ ,000 WE STP ,000 STC PIPEPT,PS,PF1/8 WEN2B M8 M20 M8 M14 PIPEPT,PS,PF1/ ,000 WE PIPEPT,PS,PF3/ HSK100A -STP ,000 STC WEN1B M3 M12 M3 M10 PIPEPT,PS,PF1/ ,000 WE STP ,000 STC PIPEPT,PS,PF1/8 WEN2B M8 M20 M8 M14 PIPEPT,PS,PF1/ ,000 WE PIPEPT,PS,PF3/8 L5 values are in the case of metric thread. Please refer to P. 430, P. 434 for L6 dimension of WE, WEN B. STC1 L6 MIN MAX STC2 L6 MIN MAX

43 STC1- FDC-09 FDC-09 HDP-09B 17,000 S-1L STC1- ESC10 KDP ,000 S-1L STC2- FDC-16 FDC-16 HDP-16B 19,000 S-4L STC2- ESC16 KDP ,000 S-4L HSK63A - STP1-80 HSK63A - STP H STC1 - M10 WEN1B - M10 Multibore tool system 309

44 TP1 Quick Change Tapping Chuck Strong compression allows use with rolled thread tap. Tap sizes are based on old JIS standard HSK40A -TP HSK50A -TP HSK63A -TP HSK100A -TP M3 M12,U1/4 U7/16, PIPEPT,PS,PF1/8 M3 M12,U1/4 U7/16, PIPEPT,PS,PF1/8 M8 M22,U3/8 U7/8, PIPEPT,PS,PF1/8 3/8 M3 M12,U1/4 U7/16, PIPEPT,PS,PF1/8 M8 M22,U3/8 U7/8, PIPEPT,PS,PF1/8 3/8 M3 M12,U1/4 U7/16, PIPEPT,PS,PF1/8 M8 M22,U3/8 U7/8, PIPEPT,PS,PF1/8 3/8 M16 M38,U3/4 1-3/8, PIPEPT,PS,PF3/8 1-1/ , , , , , , , ,000 Multibore tool system 1. To prevent tap breakage, use tap adapter with safety torque device. 2. Tap adapter is sold separately. 3. Coolant tube is included, although center through coolant is not possible with this model. HSK63A - TP HSK63A - TP H 310

45 SLA Side Lock Holder For straight shank boring bar with fl at and straight shank boring head with fl at. Type1 Type HSK40A -SLA , SLA , SLA , HSK50A -SLA , SLA , SLA , HSK63A -SLA , SLA , SLA , HSK100A -SLA , SLA , SLA , SLA ,500 Please contact NT if the cutting tool has tilted fl at on the shank. Special tool holder that matches to the tilted fl at can be manufactureed. Multibore tool system HSK63A - SLA20-90 HSK63A - SLA H 311

46 SL2 Side Lock Holder For JIS straight shank endmill with fl at. Type1 Type2 Type3 Type4 Multibore tool system HSK40A -SL M6 19, M8 19, M , M12 19, M14 19, M , HSK50A -SL M6 20, M8 21, M , M , M , M , HSK63A -SL M , M8 22, M , M , M , M , M , M , M , M , HSK100A -SL M8 30, M , M , M10 31, M , M , M , M , M , M16 31, M , M18 31, M , M20 31,000 Please contact NT if the cutting tool has tilted fl at on the shank. Special tool holder that matches to the tilted fl at can be manufactureed. HSK63A - SL HSK63A - SL H 312

47 SLD Side Lock Holder For use with straight shank cutting tools with a fl at and a fl ange HSK63A -SLD H , SLD H , SLD H , SLD H , HSK100A -SLD H , SLD H , SLD H , SLD H , SLD H ,000 HSK63A - SLD H Multibore tool system 313

48 FMH Face Mill Arbor (For Cutters with Oil Hole) Coolant fl ows from the end face of centering location to cutter with oil hole. Type1 Type2 Type3 Multibore tool system HSK40A -FMH ,700 M FMH22 -FMH ,700 21,700 M FMH , FMH ,900 M HSK50A -FMH ,700 M FMH22 -FMH ,700 21,900 M FMH , FMH ,900 M HSK63A -FMH , ,900 M , FMH , , , , , , FMH ,200 M , , , , , FMH , , , FMH , ,000 M , , , , FMH , , , , ,000 M , FMH , , ,

49 HSK100A -FMH , , , , , , FMH , , , , , , , , , , , , FMH , , , , , , , , , , , , FMH , , , , , FMH , , , , , , , , , , FMH , , , , , , , , , , FMH , , , FMH , , , , , , FMH , , , FMH , , ,000 M8 M10 M12 M16 MBAH-M20 MBAH-M24 Multibore tool system Clamp bolt is Included. HSK50A - FMH HSK63A - FMH H 315

50 FMA Face Mill Arbor For JIS B4113 face mill. Type1 Type2 Multibore tool system HSK40A -FMA ,600 MBA-M FMA ,600 MBA-M HSK50A -FMA ,000 MBA-M HSK63A -FMA , ,000 MBA-M FMA , ,000 MBA-M , FMA , ,000 MBA-M , FMA , ,000 MBA-M , HSK100A -FMA , ,000 MBA-M , FMA , ,000 MBA-M , FMA , ,000 MBA-M , FMA , ,000 MBA-M ,000 Clamp bolt is Included. HSK50A - FMA HSK63A - FMA H 316

51 FMB Face Mill Arbor For SANDVIK T-MAX face mill and shoulder cutter. Type1 Type HSK40A -FMB ,600 MBA-M FMB ,600 MBA-M HSK50A -FMB ,000 MBA-M FMB ,000 MBA-M HSK63A -FMB ,500 MBA-M FMB ,500 MBA-M FMB ,400 MBA-M HSK100A -FMB ,900 MBA-M FMB ,900 MBA-M FMB ,500 MBA-M Clamp bolt is Included. HSK50A - FMB HSK63A - FMB H Multibore tool system 317

52 FMC Face Mill Arbor For SANDVIK T-MAX shoulder face mill. Type1 Type2 Multibore tool system HSK40A -FMC ,600 M FMC ,600 M HSK50A -FMC ,000 M FMC ,000 M HSK63A -FMC ,500 M FMC ,500 M FMC ,500 M FMC ,500 M HSK100A -FMC ,600 M FMC ,900 M FMC ,900 M FMC ,800 M Clamp bolt is Included. HSK50A - FMC HSK63A - FMC H 318

53 SCA Side Cutter Arbor For JIS side cutter and metal saw. Type1 Type2 L1 30 H1 1 4 K1 H2 2 H3 H4 G1 D1 C1 C1 C1 G1 B HSK40A -SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , HSK50A -SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , SCA M ,5,7,8,10, , HSK63A -SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , HSK100A-SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , SCA M ,5,7,8,10, , M ,5,7,8,10, , One clamp nut and spacers (size 3, 5, 7, 8, 10, and 12 / one each) are included. Coolant tube is included, although center through coolant is not possible with this model. Multibore tool system HSK63A - SCA HSK63A - SCA H 319

54 MTA Morse Taper Holder For Morse taper shank with tang. Type1 Type2 Type3 Multibore tool system HSK40A -MTA , MTA , MTA , HSK50A -MTA , MTA , MTA , HSK63A -MTA , MTA , MTA , MTA , HSK100A -MTA , MTA , MTA , MTA , MTA , Coolant tube is included, although center through coolant is not possible with this model. HSK63A - MTA1-105 HSK63A - MTA H 320

55 MS Master Arbor HSK32A -MS , HSK40A -MS , HSK50A -MS , HSK63A -MS , HSK100A -MS , Center through coolant is not possible with this model. HSK63A - MS Multibore tool system 321

56 HSKA Master Shank Base shank for multibore tooling system. Type1 Type2 Multibore tool system HSK40A , , , , , , HSK50A , , , , , , , , , , , , , HSK63A , , , , , , , , , , , , , , , , HSK100A , , , , , , , , , , , , , , , , ,000 HSK63A HSK63A H 322

57 KLD Keyless Drill Chuck HSK40A -KLD ,000 FC6.5LC HSK50A -KLD ,000 FC13LC HSK63A -KLD ,000 FC13LC HSK100A -KLD ,000 FC13LC 1. Coolant tube is included, although center through coolant is not possible with this model. FC6.5LC ,200 FC13LC ,500 HSK63A - KLD HSK63A - KLD H Multibore tool system 323

58 HDCA High-Precision Collet Holder Suitable for drilling, reaming and fi nish endmilling. Multibore tool system HSK25E -HDC07A HDP-07A 36, ~ 4 22 ~ HDP-07A 36,400 HDS-07 FDC-07 S HDC09A HDP-09 37, ~ 4 27 ~ HDP-09 37,400 HDS-09 FDC-09 S-1L HSK32E -HDC07A HDP-07A 36, ~ 4 22 ~ HDP-07A 36,400 HDS-07 FDC-07 S HDC09A HDP-09 37, ~ 4 27 ~ HDP-09 37,400 HDS-09 FDC-09 S-1L HDC12A HDP-12 37, ~ 5 33 ~ HDP-12 37,800 HDS-12 FDC-12 S-3L HSK40E -HDC07A HDP-07A 36, ~ 4 22 ~ HDP-07A 36,400 HDS ~ 4 22 ~ HDP-07A 36,400 HDS-07 FDC-07 S ~ 4 22 ~ HDP-07A 37,100 HDS ~ 4 22 ~ HDP-07A 37,700 HDS HDC09A HDP-09 34, HDP-09 34, ~ 4 27 ~ HDP-09 35,100 HDS-09 FDC-09 S-1L ~ 4 27 ~ HDP-09 36,400 HDS ~ 4 27 ~ HDP-09 37,100 HDS HDC12A HDP-12 37, ~ 5 33 ~ HDP-12 37,800 HDS ~ 5 33 ~ HDP-12 38,400 HDS-12 FDC-12 S-3L ~ 5 33 ~ HDP-12 39,000 HDS ~ 5 33 ~ HDP-12 42,000 HDS HDC16A HDP-16 38, ~ 6 38 ~ HDP-16 38,700 HDS ~ 6 38 ~ HDP-16 39,300 HDS-16 FDC-16 S-4L ~ 6 38 ~ HDP-16 41,200 HDS ~ 6 38 ~ HDP-16 44,400 HDS HSK50E -HDC07A HDP-07A 39, ~ 4 22 ~ HDP-07A 39,500 HDS ~ 4 22 ~ HDP-07A 39,500 HDS-07 FDC-07 S ~ 4 22 ~ HDP-07A 40,000 HDS ~ 4 22 ~ HDP-07A 40,500 HDS HDC09A HDP-09 38, ~ 4 27 ~ HDP-09 38,500 HDS ~ 4 27 ~ HDP-09 39,500 HDS-09 FDC-09 S-1L ~ 4 27 ~ HDP-09 40,000 HDS

59 1. Collet, spanner and hexagon head preset screw are sold separately. Standard preset screw is included. 2. "L3" indicates dimension when using with a preset screw. 3. See P. 486 for standard tightening torque. 4. Tools marked with cannot have coolant hoses installed HSK50E -HDC12A HDP-12 40, ~ 5 33 ~ HDP-12 40,400 HDS ~ 5 33 ~ HDP-12 41,000 HDS-12 FDC ~ 5 33 ~ HDP-12 42,000 HDS ~ 5 33 ~ HDP-12 44,000 HDS HDC16A HDP-16 44, HDP-16 44, ~ 6 38 ~ HDP-16 45,500 HDS-16 FDC ~ 6 38 ~ HDP-16 46,500 HDS ~ 6 38 ~ HDP-16 47,500 HDS HDC22A HDP-22 47, HDP-22 48, ~ 8 47 ~ HDP-22 49,000 HDS-22 FDC ~ 8 47 ~ HDP-22 51,500 HDS-22 S-3L S-4L S-5L HSK50E - HDC12A - 60 Multibore tool system 325

60 ERC Collet Holder For Small Diameters For drilling in tight space HSK25E -ERC ERP , ERP , (0~2.4) 34 (19~20) 12 ERP ,500 ES8 ER8 S-8E ERC11S ERP-11S , ~4 22~27 16 ERP-11S ,000 HDS-07A-ES11 FDC-07 S-11E HSK32E -ERC ERP-8 45, ERP-8 45,500 ER8 S-8E ERC11S ERP-11S 44, ~4 22~24 16 ERP-11S 44,000 HDS-07A-ES11 FDC-07 S-11E HSK40E -ERC ERP , ERP ,500 ER8 S-8E ERC11S ERP-11S , ~4 22~24 16 ERP-11S ,000 HDS-07A-ES11 FDC-07 S-11E HSK50E -ERC ERP , ERP , (0~2.4) 34 (19~30) 12 ERP-8 46,000 ES ERC11S ERP-11S ,800 ER8 S-8E Multibore tool system ~4 22~24 16 ERP-11S ,000 HDS-07A-ES ~4 22~32 16 ERP-11S 45,000 HDS-07A-ES11 FDC-07 S-11E 1. Collet and spanner are sold separately. 2. ES8, a preset screw for ERC8, is sold separately. 3. " B " and " " dimensions in brackets are for using ES8 preset screw. 4. See P. 486 for standard tightening torque. HSK40E - ERC

61 PHC A Power Hydro Chuck Hydro chuck with collet holder fl exibility. Suitable for high precision cutting HSK40E -PHC06A , PHC07A , PHC08A , PHC09A , PHC10A , PHC11A , PHC12A , HSK50E -PHC06A , PHC07A , PHC08A , PHC09A , PHC10A , PHC11A , PHC12A , PHC13A , PHC14A , PHC15A , PHC16A , PHC20A , Cutting tool shank must be within tolerances specifi ed below ; Shank diameter less than 6mm : Within h6 tolerance Shank diameter 6mm and over : Within h7 tolerance h6 or 0/-0.01 tolerance is recommended when newly making a cutting tool. 2. PHC12A and PHC20A have pin holes for collet with stopper pin on its body. L- 4T L- 4T Multibore tool system HSK50E - PHC12A

62 SRE Shrink Fit ( Small Diameter Type ) Shrinkage method sets a cutting tool fi rmly by heating and cooling the chuck. High precision and strong chucking. (Small diameter type) Multibore tool system HSK25E -SRE3A , , SRE4A , , SRE5A , , SRE6A , , SRE8A , , HSK32E -SRE3A , , SRE4A , , SRE5A , , SRE6A , , SRE8A , , HSK40E -SRE3A , , SRE4A , , SRE5A , , SRE6A , , , SRE8A , , , HSK50E -SRE3A , , SRE4A , , SRE5A , , SRE6A , , , SRE8A , , ,300 ISG NT coil is necessary in case of heating SRE chucks with ISG Center through coolant is not possible with SRE3A and SRE4A. 2. SRE cannot have coolant hoses installed. 3. Always use carbide shank tools with h6 tolerance. HSK40E - SRE6A

63 HDCA High-Precision Collet Holder Suitable for drilling, reaming and fi nish endmilling HSK63F -HDC07A HDP-07A 46,200 HDS HDP-07A 47,300 HDS HDP-07A 48,400 HDS HDP-07A 49,500 HDS HDC09A ( ~ 33) 26 HDP-09 46,200 HDS HDP-09 47,300 HDS HDP-09 48,400 HDS HDP-09 49,500 HDS HDP-09 51,200 HDS HDC12A HDP-12 47, HDP-12 48,400 HDS HDP-12 49,500 HDS HDP-12 50,600 HDS HDP-12 52,300 HDS HDC16A HDP-16 50, ( ~ 46) 36 HDP-16 51,700 HDS HDP-16 52,800 HDS HDC22A HDP-22 56, HDP-22 57,200 HDS ( ~ 59) 46 HDP-22 58,300 HDS-22 FDC-07 S-0 FDC-09 FDC-12 FDC-16 FDC Collet, spanner and hexagon head preset screw are sold separately. Standard preset screw is included. 2. "" indicates dimension when using with a preset screw. The value within () indicates the value when using a preset screw with a hex hole (sold separately). 3. See P. 486 for standard tightening torque. S-1L S-3L S-4L S-5L Multibore tool system HSK63F - HDC12A

64 ERC Collet Holder For Small Diameters For drilling in tight space HSK63F -ERC (0 2.4) 34 (19 31) 12 ERP , (0 2.4) 34 (19 31) 12 ERP-8 51,500 ES8 Option) ER8 S-8E (0 2.4) 34 (19 31) 12 ERP , ERC11S ERP-11S , ERP-11S ,000 HDS-07A-ES11 Included) FDC-07 S-11E ERP-11S , Collet and spanner are sold separately. 2. ES8, a preset screw for ERC8, is sold separately. ERC11S includes a standard preset screw HDS-07A-ES " B " and " " dimensions in brackets are for using ES8 preset screw. 4. See P. 486 for standard tightening torque. Multibore tool system HSK63F - ERC

65 PHC A Power Hydro Chuck Hydro chuck with collet holder fl exibility. Suitable for high precision cutting. Type1 Stopper bolt 1 Insertion length Min. clamping length Type2 Stopper bolt 1 Insertion length Min. clamping length L L1 D1 D2 D HSK63F -PHC06A , , PHC07A , , PHC08A , , PHC09A , , PHC10A , , PHC11A , , PHC12A , , PHC13A , , PHC14A , , PHC15A , , PHC16A , , PHC20A , , PHC25A , , PHC32A , , Cutting tool shank must be within tolerances specifi ed below ; Shank diameter less than 6mm : Within h6 tolerance Shank diameter 6mm and over : Within h7 tolerance h6 or 0/-0.01 tolerance is recommended when newly making a cutting tool. 2. PHC12A and PHC20A have pin holes for collet with stopper pin on its body. d L0 L L1 d D1 D2 D3 L-4T L-6T Multibore tool system HSK63F - PHC12A

66 MN5523J Manual Flange How to install 1.Insert the holder into the spindle. 2. Turn the cover ring. 3. Insert the wrench into the clamp bolt and turn it clockwise. 4.Remove the wrench and cover the hex hole for the wrench by turning the cover ring. Multibore tool system 332

商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16.

商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16. BT HDC A 高精度コレットホルダ BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHigh-Precision Collet Holder ドリル加工 リーマ加工 仕上エンドミル加工に最適 Suitable for drilling, reaming and finish endmilling. ターニングツールTurning Tools for

More information

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ "R"Zero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ R ゼロホルダ RZero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです ターニングツールTurning Tools for SPEEDIO STシャンーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic

More information

商品コード Code 1. センタースルークーラント供給時は M4 5(S) ボルト 1 本でエアー抜き穴をふさいで下さい 2. 専用スパナは付属していません ご注文時に必要数をご指定頂ければ無償出荷します 3. h7 公差の刃具シャンクをご使用下さい 1.Use 1pcs. of M4 5(S)h

商品コード Code 1. センタースルークーラント供給時は M4 5(S) ボルト 1 本でエアー抜き穴をふさいで下さい 2. 専用スパナは付属していません ご注文時に必要数をご指定頂ければ無償出荷します 3. h7 公差の刃具シャンクをご使用下さい 1.Use 1pcs. of M4 5(S)h BT CT A タイトロックミーリングチャック BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミTite-Lock Milling Chuck 締め付け完了時にカチッと音の鳴る細身設計ミーリングチャックです Slim design milling chuck. Clicking sound tells completion of clamping. Type1

More information

T SA New HSK A/E/F/ 専用機 関連機器 ブシュ メントリミターニングツールTurning Tools for プルスタッーリングチャックMilling huck コレットホルダollet Holder ハイドロチャックHydraulic huck タッピングチャックTapping

T SA New HSK A/E/F/ 専用機 関連機器 ブシュ メントリミターニングツールTurning Tools for プルスタッーリングチャックMilling huck コレットホルダollet Holder ハイドロチャックHydraulic huck タッピングチャックTapping B T シリーズツーリングシステム (MAS 403-1982) TOOLING SYSTEM 059 T SA New HSK A/E/F/ 専用機 関連機器 ブシュ メントリミターニングツールTurning Tools for プルスタッーリングチャックMilling huck コレットホルダollet Holder ハイドロチャックHydraulic huck タッピングチャックTapping

More information

A H O AHO シリーズツーリングシステム AHO TOOLING SYSTEM 213

A H O AHO シリーズツーリングシステム AHO TOOLING SYSTEM 213 A H O シリーズツーリングシステム TOOLING SYSTEM 213 T SA スーパータイトロックミーリングチャック 専用機関連機器ブシュ メントリミSuper tite-lock Milling huck 細身設計でありながら重切削を可能にした口元締まりの特殊スリット採用 Slim design milling chuck. Specially designed slits enables

More information

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec

BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted by

More information

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3 BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted

More information

ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys

ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool system 機能付きホルダFunction Holder プルスタッドRetention Stud シャンク規格Tool

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

00_1512_SLIMLINE_BOOK.indb

00_1512_SLIMLINE_BOOK.indb PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity

More information

FMA Type3 Type4 Multibore tool system Please refer to P When AHO is used with center through coolant feeding, a designated retention stud (with

FMA Type3 Type4 Multibore tool system Please refer to P When AHO is used with center through coolant feeding, a designated retention stud (with BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミFMA フェイスミルアーバ JIS B4113 正面フライス用 ターニングツールTurning Tools for SPEEDIO プルスタッーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

429

429 WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B

More information

ハイドロチャックオメガ PHC H Hydro Chuck Omega 抜けない! ビビらない! 曲がらない! ワンランク上の高能率加工を実現! No more pullout, chatter or deflection! Step on up to high-efficiency machini

ハイドロチャックオメガ PHC H Hydro Chuck Omega 抜けない! ビビらない! 曲がらない! ワンランク上の高能率加工を実現! No more pullout, chatter or deflection! Step on up to high-efficiency machini ハイドロチャックシリーズ Hydro Chuck Series ハイドロチャックオメガ PHC H Hydro Chuck Omega 抜けない! ビビらない! 曲がらない! ワンランク上の高能率加工を実現! No more pullout, chatter or deflection! Step on up to high-efficiency machining! レンチ 1 本で簡単チャッキング

More information

ハイドロチャックシリーズ Hydro Chuck Series

ハイドロチャックシリーズ Hydro Chuck Series ハイドロチャックシリーズ Hydro Chuck Series ハイドロチャックオメガ Hydro Chuck Omega 抜けない! ビビらない! 曲がらない! ワンランク上の高能率加工を実現! No more pullout, chatter or deflection! Step on up to high-efficiency machining! レンチ 1 本で簡単チャッキング Easy!

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

P.86 P.89,90 P.91,92 HSK series FEATURES >> P.1-6 FEATURES >> P.1-6 FEATURES >> P.1-6 HPC MICRON CHUCK HPC-H MICRON CHUCK H series HPC-M MICRON CHUCK

P.86 P.89,90 P.91,92 HSK series FEATURES >> P.1-6 FEATURES >> P.1-6 FEATURES >> P.1-6 HPC MICRON CHUCK HPC-H MICRON CHUCK H series HPC-M MICRON CHUCK HSK series 86 89,90 91,92 93 96 97 101 103 103 104 105 106 107 108 109 111 112 113 113 114 115 116 117 MICRON CHUCK (Milling Chuck) MICRON CHUCK H series MICRON CHUCK M series HARD CHUCK COLLET CHUCK COLLET

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06

More information

KOMET KUB K2® 小径対応ヘッド交換式ドリル

KOMET KUB K2® 小径対応ヘッド交換式ドリル KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also

More information

03-03 Bush Mentori.pdf

03-03 Bush Mentori.pdf 54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1

More information

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i 内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining

More information

汎用ツール

汎用ツール 汎用ツール < 汎用機用 >ハードチャック < 汎用機用 > 正面フライスアーバA 型 < 汎用機用 >ハードチャック ( 標準セットA) < 汎用機用 >ハードチャック ( 標準セットB) < 汎用機用 >ハードチャック < 汎用機用 >Sホルダ (QCホルダ) Sホルダ ( 標準セット ) Sホルダ本体 (QCホルダ) テーパスリーブ (Sコレット) ハードチャック (S2コレット)

More information

汎用ツール 汎用 用 ー 特徴 FEATURES P.9- NT -CTH <NT Shank> HARD CHUCK 標準セット A,B A-set, B-set P.49 H G NT No. MODE CODE H G NTW -CTH20 U NT40(M) -CTH25 -CTH U NT

汎用ツール 汎用 用 ー 特徴 FEATURES P.9- NT -CTH <NT Shank> HARD CHUCK 標準セット A,B A-set, B-set P.49 H G NT No. MODE CODE H G NTW -CTH20 U NT40(M) -CTH25 -CTH U NT 汎用ツール < 汎用機用 >ハードチャック < 汎用機用 > 正面フライスアーバA 型 < 汎用機用 >ハードチャック ( 標準セットA) < 汎用機用 >ハードチャック ( 標準セットB) < 汎用機用 >ハードチャック < 汎用機用 >Sホルダ (QCホルダ) Sホルダ ( 標準セット ) Sホルダ本体 (QCホルダ) テーパスリーブ (Sコレット) ハードチャック (S2コレット)

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

名称未設定-1

名称未設定-1 シンクロタップホルダ SYFN/SYFS 型 特徴 FEATURES P.2 BT SYFN/SYFS SYNCHRO TAP HODER センタースルー対応 Thru thetool Coolant Available スキマスルー対応 ( オプション ) Thruthegroove Coolant Available(Option) 2 H 2 FIG. FIG.4 FIG.5 2 2 2 2

More information

品紹 Rustproof Tool Holder ECO NT TOOL, the best protection against rust! 商 Special rust proof coating on entire surface including the tapered shank (BT

品紹 Rustproof Tool Holder ECO NT TOOL, the best protection against rust! 商 Special rust proof coating on entire surface including the tapered shank (BT 品 商紹介026 Eco Holder Series ECO 品紹 Rustproof Tool Holder ECO NT TOOL, the best protection against rust! 商 Special rust proof coating on entire surface including the tapered shank (BT, AHO, CAT only). Prevent

More information

Features Features FeaturesThread milling cutters 1

Features Features FeaturesThread milling cutters 1 Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons

More information

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach

More information

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong

More information

名称未設定-1

名称未設定-1 コレットチャック高速タイプ ( メッキコーティング ) BT のみ 特徴 FEATURES P.9-10 BT -RSC D MAX- G COET CHUCK G Type (PATE COATING) BT only センタースルー対応 Thru -the-tool Coolant Available スキマスルー対応 Thru-the-groove Coolant Available BBT

More information

Thread Mill Series

Thread Mill Series Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank

More information

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U

汎用ツール 汎用 用 ル ル ル ル S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. 4 S U - HODER 2 3 引きネジ 4 呼称 1 type MODE 1 SU-HODER S50U 汎用 用 ル ル S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High rigidity makes the

More information

HSK シリーズ コレットチャック用 ACCESSORIES for COET CHUCK C R コレット CR COET CR -D (A) 4 d (B) BT series 簡単で確実なコレット着脱 リングの内側の約半分が大きくなっていますので コレットを傾けるだけで 簡単に着脱できます E

HSK シリーズ コレットチャック用 ACCESSORIES for COET CHUCK C R コレット CR COET CR -D (A) 4 d (B) BT series 簡単で確実なコレット着脱 リングの内側の約半分が大きくなっていますので コレットを傾けるだけで 簡単に着脱できます E コレットチャック ( スリムタイプ ) 特徴 FEATURES P.14 ST D -SSC D MAX- COET CHUCK (SIM TYPE) センタースルー対応 Thru -the-tool Coolant Available スキマスルー対応 Thru-the-groove Coolant Available ST シリーズ FIG.1 調整ネジ ( 別売 ) H 1 2 BT series

More information

メタルバンドソー

メタルバンドソー Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

More information

ー 特徴 FEATURES P.9-10 SBT -CTH - HARD CHUCK センタースルー対応 Thru -the-tool Coolant Available BT シリーズ 特長 FEATURES ハードチャックはツーリングに要求される条件 ( 剛性 求心性 操作性 経済性 ) を総合

ー 特徴 FEATURES P.9-10 SBT -CTH - HARD CHUCK センタースルー対応 Thru -the-tool Coolant Available BT シリーズ 特長 FEATURES ハードチャックはツーリングに要求される条件 ( 剛性 求心性 操作性 経済性 ) を総合 ー 特徴 EATURES P.9-0 ST -CT - ARD CUCK センタースルー対応 Thru -the-tool Coolant Available T シリーズ 特長 EATURES ハードチャックはツーリングに要求される条件 ( 剛性 求心性 操作性 経済性 ) を総合的に考えて設計していますので あらゆる条件にもハイレベルで調和を計り無理のないツールレイアウトが可能です The ball

More information

SK シリーズ 特徴 FEATURES P.9-10 SKA -RSC MAX- G COET CUCK G Type センタースルー対応 Thru -the-tool Coolant Available スキマスルー対応 Thru-the-groove Coolant Available 調整ネジ

SK シリーズ 特徴 FEATURES P.9-10 SKA -RSC MAX- G COET CUCK G Type センタースルー対応 Thru -the-tool Coolant Available スキマスルー対応 Thru-the-groove Coolant Available 調整ネジ 特徴 FEATURES P.9-10 SKA -RSC MAX- COET CUCK センタースルー対応 Thru -the-tool Coolant Available スキマスルー対応 Thru-the-groove Coolant Available SK シリーズ 調整ネジ ( 別売 ) Max. 20,000min -1 Max. 8,000min -1 Accessories Cutting

More information

名称未設定-1

名称未設定-1 T ハードチャック 特徴 EATURES P.7- T -CT D - ARD CUCK センタースルー対応 Thru -the-tool Coolant Available 特長 EATURES ハードチャックはツーリングに要求される条件 ( 剛性 求心性 操作性 経済性 ) を総合的に考えて設計していますので あらゆる条件にもハイレベルで調和を計り無理のないツールレイアウトが可能です The ball

More information

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U

汎用ツール < 汎用機用 > S ホルダ (QC ホルダ ) S ホルダ本体 (QC ホルダ ) S-HODER BODY (Q.C. Holder) <NT Shank> S-HODER (Q.C. Holder) S -HODER NT No. ご注文例 ORDERIN EXAMPE 4 S U < 汎用機用 > S ホルダ ( Q C ホルダ ) S-HODER (Q.C. Holder) 汎用ツール クイックチェンジホルダのエース S-HODER Sホルダ An ace of quick change holders 工具交換が 3 秒で OK! Tool change can be done in 3 seconds. フェースミル " も使用可能の高剛性 High

More information

ALシリーズ.indd

ALシリーズ.indd アルミ専用エンドミル 倍刃長タイプ AD- AD- NS の A シリーズは あらゆる条件で安定した高能率加工を実現 コストパフォーマンスに優れた高剛性 倍刃長タイプ NS の A シリーズは あらゆる条件で安定した高能率加工を実現 幅広い領域で安定した加工面精度が得られ 高速加工でもビビリを抑制 A-series realized a stable and high efficient machining.

More information

429

429 WE WESB WENB WESNB 428 429 WENB, WENRB Quick Change Tap Adapter 0210 11000 WEN0B M3 M8M10 U1/4 U5/16U3/8 0 8 22 13 13 15 4 19.5 28 0.05 10,170 0210 11001 WEN1B M3 M12M15 U1/4 U7/16U9/16 Pipe(PT,PS,PF)1/8

More information

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc. -temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in

More information

Thread Milling Cutter Series

Thread Milling Cutter Series Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials

More information

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing AERO End Mill High Speed Carbide End Mills for Aluminum Alloys Vol.4! New cutting data on specials! LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute,

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

切削工具 NEW SUPER DRILL (Standard Head Type) 特徴 FEATURES P MT - MAX- MORSE TAPER SHANK SET (Standard) 1. 標準ヘッド ( E 以上のセット内容にはセンタードリル 替刃は含まれておりません )

切削工具 NEW SUPER DRILL (Standard Head Type) 特徴 FEATURES P MT - MAX- MORSE TAPER SHANK SET (Standard) 1. 標準ヘッド ( E 以上のセット内容にはセンタードリル 替刃は含まれておりません ) 切削工具 ニュースーパードリルセット標準形ヘッド替刃 ( 標準形ヘッド用 ) ニュースーパードリルセット平形ヘッド替刃 ( 平形ヘッド用 ) エクステンションアーバ ( 標準形ヘッド専用 ) オイルリングオイルプラグ,158 159 160,161 162 162 1 1 NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW

More information

名称未設定-1

名称未設定-1 切削工具 ニュースーパードリルセット標準形ヘッド NEW SUPER DRILL (Standard Head Type) 特徴 FEATURES P.31-34 モールステーパシャンクセット ( 標準タイプ ) MT - MAX- D MORSE TAPER SHANK SET (Standard) 1. 標準ヘッド ( E 以上のセット内容にはセンタードリル 替刃は含まれておりません ) ø L3

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

刃先の振れを限りなく ゼロ にセット NT 独自の 4 点調整方式で 簡単 確実 スピーディーに刃先の振れをゼロに NT s origina 4 Points adjustment system for easy, accurate and speedy runout adjustment! Adj

刃先の振れを限りなく ゼロ にセット NT 独自の 4 点調整方式で 簡単 確実 スピーディーに刃先の振れをゼロに NT s origina 4 Points adjustment system for easy, accurate and speedy runout adjustment! Adj 大径用 "R"ゼロホルダ - CTZ SA "R" Zero Hoder for arge Diameter - CTZ SA 大径リーマでの仕上げ加工に最適! Suitabe for arge diameter reaming. 振れ精度 Runout Accuracy 穴径の安定 Invariant Hoe Diameter φ25-42mm 面粗度UP 刃具寿命UP Better Surface

More information

名称未設定-1

名称未設定-1 コレットチャック ( メッキコーティング ) BT のみ 特徴 FEATURES P.90 BT RSC D MAX COET CUCK (PATE COATING) BT only センタースルー対応 Thru thetool Coolant Available スキマスルー対応 Thruthegroove Coolant Available BBT 対応 BBT Available BT FIG.

More information

Huawei G6-L22 QSG-V100R001_02

Huawei  G6-L22 QSG-V100R001_02 G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

タップ総合

タップ総合 1 2 3 4 N NEW タップシリーズ N Tap series ねじ加工に適した高バナジウムハイスの使用により 汎用タップながらも長寿命 高剛性設計で安定ねじ加工を実現 Nスパイラルタップ NSP By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads

More information

H1-H4

H1-H4 No.489 Plunging Tools SEC-PDL/ SEC - SEC-Plunge Drill PDL Type/ SEC-Plunge Mill Type Having an edge in pocketing and deep contour milling! Lineup of 10 items each from the PDL type / type! Achieving stable

More information

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

TOOL STORAGE CABINET REMOVABLE TOOL STORAGE CABINET 373

TOOL STORAGE CABINET REMOVABLE TOOL STORAGE CABINET 373 373 Removable Tool Storage Cabinet MS8Shelves can be combined as desired Removable doors Size Weight 60kg/shelf Shelves Order a total of 8 shelves per cabinet Shelf Part No.TD50 Removable type Shelf Part

More information

名称未設定-1

名称未設定-1 マイクロンチャックク MICRON CHUCK 何故マイクロンなのか? Why Micron Chuck? Outstanding Clamping power. Minimal runout. 高速 高精度 高剛性ミーリングチャック HIGH PRECISION MILLING CHUCK 1 1 振れ精度口元 1μ 3D 先 2μ を保証できるのは マイクロンチャックだけ Only Micron

More information

アクアEXオイルホールロング(CC2015).indd

アクアEXオイルホールロング(CC2015).indd High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge

More information

2

2 8 23 26A800032A8000 31 37 42 51 2 3 23 37 10 11 51 4 26 7 28 7 8 7 9 8 5 6 7 9 8 17 7 7 7 37 10 13 12 23 21 21 8 53 8 8 8 8 1 2 3 17 11 51 51 18 23 29 69 30 39 22 22 22 22 21 56 8 9 12 53 12 56 43 35 27

More information

2

2 8 22 19A800022A8000 30 37 42 49 2 3 22 37 10 11 49 4 24 27 7 49 7 8 7 9 8 5 6 7 9 8 16 7 7 7 37 10 11 20 22 20 20 8 51 8 8 9 17 1 2 3 16 11 49 49 17 22 28 48 29 33 21 21 21 21 20 8 10 9 28 9 53 37 36 25

More information

2

2 8 24 32C800037C800042C8000 32 40 45 54 2 3 24 40 10 11 54 4 7 54 30 26 7 9 8 5 6 7 9 8 18 7 7 7 40 10 13 12 24 22 22 8 55 8 8 8 8 1 2 3 18 11 54 54 19 24 30 69 31 40 57 23 23 22 23 22 57 8 9 30 12 12 56

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F 01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries

More information

特殊防錆処理 Rustproof シャンク部等除く Some exceptions apply クーラント対応 Coolant feeding enabled

特殊防錆処理 Rustproof シャンク部等除く Some exceptions apply クーラント対応 Coolant feeding enabled 特殊防錆処理 Rustproof シャンク部等除く Some exceptions apply クーラント対応 Coolant feeding enabled HSK T とは? 複合加工機の旋削機能を最大限に発揮するために作られたインターフェースです 2008 年に ISO12164-3:2008 として国際標準規格化されました What is HSK-T? HSK-T interface was

More information

BNM

BNM Features and benefits 1. Ultimate precision indexable ball nose endmill with two effective teeth Radius form accuracy : below m (Radius form accuracy of insert : below m) 2. Precision clamp screw mounting

More information

PC_14ZY6_BFT150A_US_ indd

PC_14ZY6_BFT150A_US_ indd PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any

More information

SGドリルシリーズ_CC2015.indd

SGドリルシリーズ_CC2015.indd SG Drill Series High performance PMHSS Drills High performance PMHSS Drills Powder HSS with SG Coating and the tool life is 2 times of conventional coated drills. Extremely precise positioning and Stable

More information

6 50G5S 3 34 47 56 63 http://toshibadirect.jp/room048/ 74 8 9 3 4 5 6 3446 4755 566 76373 7 37 3 8 8 3 3 74 74 79 8 30 75 0 0 4 4 0 7 63 50 50 3 3 6 3 5 4 4 47 7 48 48 48 48 7 36 48 48 3 36 37 6 3 3 37

More information

HG…p†[…c…J…^…“…O

HG…p†[…c…J…^…“…O HG Hemming guide device Machine models W(T)664 Series / HG Series Parts Catalog INTRODUCTION This parts catalog covers the HG Series device. On pages 2-37, each mechanism is arranged on facing pages, the

More information

6 3 34 50G5 47 56 63 74 8 9 3 4 5 6 3446 4755 566 76373 7 37 3 8 8 3 3 74 74 79 8 30 75 0 0 4 4 0 7 63 50 50 3 3 6 3 5 4 4 47 7 48 48 48 48 7 36 48 48 3 36 37 6 3 3 37 9 00 5 45 3 4 5 5 80 8 8 74 60 39

More information

Lock diagram レバーハンドル用標準錠前製品図 切カキ図 Lock for Lever Handle Product diagram / Assembly diagram シリンダー錠の設定はありません 錠前はルーター加工用調整式ストライクです 錠前のフロント及びストライクはステンレスです

Lock diagram レバーハンドル用標準錠前製品図 切カキ図 Lock for Lever Handle Product diagram / Assembly diagram シリンダー錠の設定はありません 錠前はルーター加工用調整式ストライクです 錠前のフロント及びストライクはステンレスです レバーハンドル用標準錠前製品図 切カキ図 Lock for Lever Handle / シリンダー錠の設定はありません 錠前はルーター加工用調整式ストライクです 錠前のフロント及びストライクはステンレスです 対応ドア厚は mm 0mm が標準です 内部ドア用です There is no setting for the cylinder lock. The lock is adjustment style

More information

シンクロマスター SynchroMaster Tap Holder STシャンクホルダ追加! BT50 ホルダ New ST shank holder and BT50 holder! A タップとの相性抜群 Designed for the A-Tap

シンクロマスター SynchroMaster Tap Holder STシャンクホルダ追加! BT50 ホルダ New ST shank holder and BT50 holder! A タップとの相性抜群 Designed for the A-Tap シンクロマスター Tap Holder STシャンクホルダ追加! BT50 ホルダ New ST shank holder and BT50 holder! A タップとの相性抜群 Designed for the A-Tap 同期送り機構付き設備用のタップホルダをお探しの皆さまへ To manufacturers who are looking for a tap holder for equipment

More information

H8000操作編

H8000操作編 8 26 35 32H800037H800042H8000 49 55 60 72 2 3 4 48 7 72 32 28 7 8 9 5 7 9 22 43 20 8 8 8 8 73 8 13 7 7 7 55 10 49 49 13 37 49 49 49 49 49 49 12 50 11 76 8 24 26 24 24 6 1 2 3 18 42 72 72 20 26 32 80 34

More information

2 3 12 13 6 7

2 3 12 13 6 7 2 8 17 42ZH700046ZH700052ZH7000 28 43 54 63 74 89 2 3 12 13 6 7 3 4 11 21 34 63 65 8 17 4 11 4 55 12 12 10 77 56 12 43 43 13 30 43 43 43 43 10 45 14 25 9 23 74 23 19 24 43 8 26 8 9 9 4 8 30 42 82 18 43

More information

Z7000操作編_本文.indb

Z7000操作編_本文.indb 2 8 17 37Z700042Z7000 46Z7000 28 42 52 61 72 87 2 3 12 13 6 7 3 4 11 21 34 61 8 17 4 11 4 53 12 12 10 75 18 12 42 42 13 30 42 42 42 42 10 62 66 44 55 14 25 9 62 65 23 72 23 19 24 42 8 26 8 9 9 4 11 18

More information

BT MICRON CHUCK (Milling Chuck) FEATURES P.1-6 -HPC- Thru -the-tool Coolant Available Thru-the-groove Coolant Available FIG.1 M L H H1 L1 FIG.2 M L H

BT MICRON CHUCK (Milling Chuck) FEATURES P.1-6 -HPC- Thru -the-tool Coolant Available Thru-the-groove Coolant Available FIG.1 M L H H1 L1 FIG.2 M L H BT series 29,30 33,34 35,36 37 38 39 42,43 44 48 49 51 53 53 54 55 56 57 58 59 60 61 62 63 65 65 66 67 68 69 70 71 72 73 74 75,76 77 77 78 78 79 80 81,82 MICRON CHUCK (Milling Chuck) MICRON CHUCK H series

More information

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed

More information

2

2 8 23 32A950S 30 38 43 52 2 3 23 40 10 33 33 11 52 4 52 7 28 26 7 8 8 18 5 6 7 9 8 17 7 7 7 38 10 12 9 23 22 22 8 53 8 8 8 8 1 2 3 17 11 52 52 19 23 29 71 29 41 55 22 22 22 22 22 55 8 18 31 9 9 54 71 44

More information

untitled

untitled Coaxial shaft type VRS VRB VRL VRT VRS series VRB series VRL series VRT series VRXF VRXF series VRG VRG series ABLE REDUCER ABLE REDUCER Reducer Selection Tool ABLE REDUCERABLE REDUCER ABLE REDUCERABLE

More information

Removable doors Removable type Size Shelves Weight Order a total of 8 shelves per cabinet Shelf Part No.TD50 60kg/shelf Removable Tool Storage Cabinet

Removable doors Removable type Size Shelves Weight Order a total of 8 shelves per cabinet Shelf Part No.TD50 60kg/shelf Removable Tool Storage Cabinet STORAGE CABINET TOOL STORAGE CABINET TOOL REMOVABLE 265 Removable doors Removable type Size Shelves Weight Order a total of 8 shelves per cabinet Shelf Part No.TD50 60kg/shelf Removable Tool Storage Cabinet

More information

1602ソディック.indd

1602ソディック.indd High Speed Electrode Machining Center Linear Motor Drive Ultra High-speed Milling Center Metal 3D Printer One Process Milling Center SHRINK-FIT HOLDER SLIMLINE DETa-1 COLLET HOLDER COLLET HOLDER The ultimate

More information

SHIMPO_40P抜粋版用_H1-H4.indd

SHIMPO_40P抜粋版用_H1-H4.indd VRS VRS series For servo motor VRSSeries VRS Coaxial shaft series Features VRS series バックラッシは3 分 以 下 精 密 な 位 置 決 めに 威 力 を 発 揮 Standard backlash is 3 arc-min, ideal for precision control. 総 ころ 形 軸 受 を

More information

技術資料

技術資料 Data 技術資料 BTシャンク寸法表 NTシャンク寸法表 MTシャンク寸法表 SKMシャンク寸法表 HSKシャンク寸法表クーラントパイプ寸法表 HSK 各タイプの形状 特徴硬度換算表国際単位換算表常用するはめあいの軸で用いる寸法許容差常用するはめあいの穴で用いる寸法許容差タップ下穴表六角穴付ボルトに対する座グリ ボルト穴寸法表 79 79 2, 7, 9 9 BT SHANK DIMENSIONS

More information

UT(W1600).indd

UT(W1600).indd UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations

More information

19_22_26R9000操作編ブック.indb

19_22_26R9000操作編ブック.indb 8 19R900022R900026R9000 25 34 44 57 67 2 3 4 10 37 45 45 18 11 67 25 34 39 26 32 43 7 67 7 8 7 9 8 5 7 9 21 18 19 8 8 70 8 19 7 7 7 45 10 47 47 12 47 11 47 36 47 47 36 47 47 24 35 8 8 23 12 25 23 OPEN

More information

P.29,30 P.33,34 P.35,36 BT series FEATURES >> P.1-6 FEATURES >> P.1-6 FEATURES >> P.1-6 HPC MICRON CHUCK HPC-H MICRON CHUCK H series HPC-M MICRON CHUCK M series P.37,38 P.39 P.42 P.44 FEATURES >> P.7-8

More information

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a SG Drill Series High performance PM-HSS Drills High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning and Stable

More information

0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin

More information

5 7 3AS40AS 33 38 45 54 3 4 5 4 9 9 34 5 5 38 6 8 5 8 39 8 78 0 9 0 4 3 6 4 8 3 4 5 9 5 6 44 5 38 55 4 4 4 4 5 33 3 3 43 6 6 5 6 7 3 6 0 8 3 34 37 /78903 4 0 0 4 04 6 06 8 08 /7 AM 9:3 5 05 7 07 AM 9

More information

2 HSK HSK 33

2 HSK HSK 33 33 /MLY MILLING CHUCK ACE LOCK HSK A63 MLY 20 105 L 1 D 1 mm D 1 L 1 C 1 H 1 H 2 kg 137101 HSK A63-MLY20-105 105 1.8 137102 HSK A63-MLY20-135 20 135 52 75 59 2.3 137103 HSK A63-MLY20-150 150 2.5 137104

More information

BT シリーズ ANGLE JET (Angle Head Holder) BT -AGCT-RSC - HSKA -AGCT-RSC - BT series 新機構搭載によりスピンドルからのセンタースルークーラントを直接刃先へ供給可能 特長 FEATURES スピンドルスルーに完全対応クーラントユ

BT シリーズ ANGLE JET (Angle Head Holder) BT -AGCT-RSC - HSKA -AGCT-RSC - BT series 新機構搭載によりスピンドルからのセンタースルークーラントを直接刃先へ供給可能 特長 FEATURES スピンドルスルーに完全対応クーラントユ BT シリーズ ANGE JET (Angle Head Holder) BT -AGCT-RSC - HSA -AGCT-RSC - 新機構搭載によりスピンドルからのセンタースルークーラントを直接刃先へ供給可能 特長 FEATURES スピンドルスルーに完全対応クーラントユニットを標準搭載したことによりこれまで不可能だったスピンドルからのクーラントの刃先への供給を可能にしました Perfectly

More information

5 30 B36B3 4 5 56 6 7 3 4 39 4 69 5 56 56 60 5 8 3 33 38 45 45 7 8 4 33 5 6 8 8 8 57 60 8 3 3 45 45 8 9 4 4 43 43 43 43 4 3 43 8 3 3 7 6 8 33 43 7 8 43 40 3 4 5 9 6 4 5 56 34 6 6 6 6 7 3 3 3 55 40 55

More information

BBT Shank Old number: L BBT30 -CKB1-72 -CKB CKB CKB CKB5-63 -CKB6-64 BBT40 -CKB1-72 -CKB CKB CKB4-4

BBT Shank Old number: L BBT30 -CKB1-72 -CKB CKB CKB CKB5-63 -CKB6-64 BBT40 -CKB1-72 -CKB CKB CKB4-4 Information about change of model numbers 为了统一 BIG 集团 ( 包括欧洲 北美 ) 产品的型号, 镗刀系列产品从下个生产批次开始变更部分型号 部分产品会出现新 旧型号同时存在的情况, 但在尺寸及品质方面无任何问题, 请放心使用 给您带来不便, 敬请谅解 BIG DAISHOWA Group promotes global unification of

More information

スリムハイドロチャックブラスター Slim Hydro Chuck Blaster 高能率加工と刃物寿命を追求した ブラスター シリーズ誕生 New "Blaster" series: Get high efficiency in machining and longer tool life! 把握

スリムハイドロチャックブラスター Slim Hydro Chuck Blaster 高能率加工と刃物寿命を追求した ブラスター シリーズ誕生 New Blaster series: Get high efficiency in machining and longer tool life! 把握 スリムハイドロチャックブラスター Sim Hyro Chuck Baster 高能率加工と刃物寿命を追求した ブラスター シリーズ誕生 New "Baster" series: Get high efficiency in machining an onger too ife! 把握径 I.D. PHC SA-C PHC SA-NC 芯ズレ精度 Accuracy ø3.0 ø25.0 ø4.0 ø12.0

More information

2

2 8 26 38 37Z800042Z800047Z8000 54 65 72 83 101 2 3 4 7 101 53 27 33 7 8 9 5 7 9 22 47 72 8 8 8 8 102 8 13 7 7 7 65 10 67 67 13 71 40 67 67 67 67 43 67 12 55 55 11 104 8 24 26 24 20 25 6 1 2 3 18 46 101

More information

0810_UIT250_soto

0810_UIT250_soto UIT UNIMETER SERIES 250 201 Accumulated UV Meter Digital UV Intensity Meter Research & Development CD Medical Biotech Sterilization Exposure Bonding Manufacturing Curing Production Electronic Components

More information

NTTOO 独自の弾性体構造にてタップ加工時の負荷を軽減し 刃物の寿命が向上! NT Tools's unique elastic design reduces tapping stress and improves cutting tool life. タップ寿命が 2~5 倍に向上!( 当社比

NTTOO 独自の弾性体構造にてタップ加工時の負荷を軽減し 刃物の寿命が向上! NT Tools's unique elastic design reduces tapping stress and improves cutting tool life. タップ寿命が 2~5 倍に向上!( 当社比 NTTOO 独自の弾性体構造により タップ加工時の負荷を軽減し刃物の寿命が向上! NT Tools's unique elastic design reduces tapping stress and improves cutting tool life. 弾性機構部はメンテナンスフリー! NT 独自の弾性体一体構造で 劣化が生じにくい! タップ寿命が 2~5 倍に向上!( 当社比 ) Tap life

More information

untitled

untitled JIS A 12190000 Method for standard penetration test 2005 1 ISO 22476-3:2005 J J 1 SPTSPT 63.5 kg 760 mm SPT N SPT 300 mm N A 2 ISO 22475-1,Geotechnical investigation and testing Sampling methods and groundwater

More information

6 4 45 7ZS 5 59 7 8 94 05 4 5 6 4 5 5 6 8 8 40 45 48 56 60 64 66 66 68 7 78 80 8 7 8 0 0 0 90 0 57 64 69 66 66 69 0 4 4 4 4 4 0 7 48 5 4 4 5 4 4 4 7 46 46 6 46 8 46 48 46 46 4 46 46 4 4 5 4 6 4 9 9 0

More information

Specification for Manual Pulse Generator, GFK-2262

Specification for Manual Pulse Generator, GFK-2262 Specification change in Manual Pulse Generator () A) Abstract This document explains about the specification change in Manual Pulse Generator (). The production of the former specifications written in

More information

On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new e

On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new e On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new electric wave projector is proposed in this paper. The

More information

6 4 4 9RERE6RE 5 5 6 7 8 9 4 5 6 4 4 5 6 8 4 46 5 7 54 58 60 6 69 7 8 0 9 9 79 0 4 0 0 4 4 60 6 9 4 6 46 5 4 4 5 4 4 7 44 44 6 44 8 44 46 44 44 4 44 0 4 4 5 4 8 6 0 4 0 4 4 5 45 4 5 50 4 58 60 57 54

More information