メタルバンドソー

Size: px
Start display at page:

Download "メタルバンドソー"

Transcription

1 Metal Band Saw Blades

2 Tornado Series selection

3 TiCN HSS Co FAX FMX PM VL

4 Selection Chart Selection Chart Solids Selection Teeth 3

5 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

6 Products Information TORNADO SWORD G TORNADO SWORD CNC/TORNADO PM CNC Features Features Longer life on diffi cult to cut material by high alloy HSS with TiCN coating. Excellent anti-adhesion. Excellent chip fl ow. Work Materials Tempered steels (to 32HRC) Mold steels HSS Stainless steels High-temperature steels Longer fatigue life by body material of spring steels. Faster cutting by positive rake and wide gullets. Smooth finish and straight cut. Work Materials Structural steels Alloy steels Stainless steels High-temperature steels Tool steels Applicable Machines Performance Performance Stocked Sizes P8 5 Stocked Sizes P9

7 TORNADO SWORD MD/TORNADO PM-MD TORNADO PM-K Features Features Long tool life by high alloy HSS. Smooth fi nish and straight cut. Suitable for profiles and bundles. Excellent chipping and low vibration in VL pitch pattern. Longer life by tooth made from Super HSS. Work Materials High & Low Wide & Narrow Structure materials Work Materials Alloy steels Mold steels Stainless steels Performance Performance Stocked Sizes P10P13 6 Stocked Sizes P14

8 Selection Tooth Form note) TORNADO G, TORNADO FAX does not support structure materials. 7

9 Size Chart Metal Band Saw Blades for Cut Off Machine TORNADO G-FAX It shows long life when cutted hardened steel and structual and tubing having difficult machinability. TORNADO SWORD G It shows long life when cutted hardened steel and structual and tubing having difficult machinability. Type TiCN FAX Stock TPI Type TiCN FMX Stock TPI Pcs. 8

10 Size Chart Metal Band Saw Blades for Cut Off Machine TORNADO FAX It is suitable for efficient cutting of hard to cut stractural and tubing. TORNADO SWORD CNC Applicable for CNC machine by adoption of tough spring steel as the body material. For difficult cutting steels. Type FAX Stock TPI CODE FMX TPI Stock TORNADO PM CNC Applicable for CNC machine by adoption of tough spring steel as the body material. For general steels. PM CODE TPI Stock 9

11 It is suitable for stractural and tubing. TORNADO SWORD TORNADO SWORD-MD Possible on a smooth cutting surface, and a small cutting resistance. CODE FMX TPI Stock Type FMX Stock TPI Stock Type TPI 10

12 Size Chart Metal Band Saw Blades for Cut Off Machine TORNADO SWORD-H Possible high speed cutting by sharp tooth design. Type FMX Stock TPI Cutting Condition P24 11

13 TORNADO PM Applicable from solid material to variant material. CODE PM TPI Stock Type Stock TPI 12

14 Size Chart Metal Band Saw Blades for Cut Off Machine TORNADO PM TORNADO PM-MD Possible on a smooth cutting surface, and a small cutting resistance. CODE TPI Stock Type Stock TPI Type PM Stock TPI WT Type Bandsaw blade In case of large selfstressing materials, band saw may be jammed by its stress. We recommend "WT type band saw blade" to avoid this jamming. 13

15 TORNADO PM-H Possible high speed cutting by sharp tooth design. TORNADO PM-K This band saw blade having variable teeth pitch and strong teeth form is suitable for cutting of profiles and bundles. Type PM Stock TPI Type PM Stock TPI 14

16 Size Chart Metal Band Saw Blades for Rortary Machine TORNADO PM Suitable for cutting of hard to cut material and structural and tubing. PM CODE TPI Stock 15

17 Metal Band Saw Blades for Contour Machine Bi-Metal PM It is suitable for automatic cutting of material such as SUS, SKD. Bi-Metal MV It is very general band saw blades, and it have high speed, high effi ciency abiiity. PM HSS Co CODE TPI Stock CODE TPI Stock 16

18 Size Chart Metal Band Saw Blades for Portable Machine Bi-Metal It is very general band saw blades. HSS Co CODE TPI Stock Selection of Teeth Material shape Solids Size of material(mm) TPI Selection of Selection of wavy cutting and width (mm) Minimum radii 17

19 Cutting Oil 18

20 Technical Reference Nomenclature Tooth form Regular tooth form Hook tooth form Tooth pitch Constant pitch Variable pitch(vl) 19

21 Type of tooth set Standard tooth set Group tooth set Combination tooth set Wave tooth set Tooth material & Bi-Metal Construction 20

22 Applicable Machines 21

23 22

24 Clamp Method According to Work Shape 23

25 Cutting Condition 24

26 Trouble-Shooting 25

27 26

28 The designs, specifications and/or dimensions are subject to change without notice. CATALOG NO V-ABE-ABE

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong

More information

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1

F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 OSG-WALTER Vol. 5 F3000 Series F3010 P3F90R NEW WAK25 F3000 SERIES FEATURES F3042 F3038 F301090 F3052 F307575 1 2 INSERT SIZE & APPLICABLE CUTER INSERTS APPLICATION CHART Inserts Application Chart Product

More information

Features Features FeaturesThread milling cutters 1

Features Features FeaturesThread milling cutters 1 Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons

More information

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a

High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning a SG Drill Series High performance PM-HSS Drills High performance PM-HSS Drills Powder HSS with SG Coating and the tool life is 2- times of conventional coated drills. Extremely precise positioning and Stable

More information

SGドリルシリーズ_CC2015.indd

SGドリルシリーズ_CC2015.indd SG Drill Series High performance PMHSS Drills High performance PMHSS Drills Powder HSS with SG Coating and the tool life is 2 times of conventional coated drills. Extremely precise positioning and Stable

More information

アクアEXオイルホールロング(CC2015).indd

アクアEXオイルホールロング(CC2015).indd High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge

More information

Thread Milling Cutter Series

Thread Milling Cutter Series Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials

More information

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM

PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach

More information

アクアドリルEX改定.indd

アクアドリルEX改定.indd AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD AQDEXOHD AQDEXOHD AQDEXZ Delivering high-performance consistently in a wide range from moderate-low to high speeds AQUA Drill EX Series AQDEXS AQDEXR AQDEXOHD

More information

Thread Mill Series

Thread Mill Series Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

KOMET KUB K2® 小径対応ヘッド交換式ドリル

KOMET KUB K2® 小径対応ヘッド交換式ドリル KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

OSG Product Catalogue VOL-2.pdf

OSG Product Catalogue VOL-2.pdf IPG CARBIDE END MILLS & DRILLS S SERIES 2 FLUTE SHORT SMG-EDS 2 FLUTE SHORT WITH PREMIER COATING TA-SMG-EDS S S 1 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 PRe

More information

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT

PRODUCT NEWS No. 405 NEW PRODUCT 45 SSE45 series 90 SSD90 SSE45 45 JCTMA ECO PRODUCT SSD90 90 JCTMA ECO PRODUCT PRODUCT NEWS No. 0 NEW PRODUCT SSE series 0 SSD0 SSE JCTMA ECO PRODUCT SSD0 0 JCTMA ECO PRODUCT series SSE, SSD0 Dijet-mill SSE type SSE For general use and face milling Features SSE gives wide application

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

BNM

BNM Features and benefits 1. Ultimate precision indexable ball nose endmill with two effective teeth Radius form accuracy : below m (Radius form accuracy of insert : below m) 2. Precision clamp screw mounting

More information

cms.pdf

cms.pdf RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Terminal pin lick spring Ground terminal Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated

More information

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing

LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute, extra long type see p.10 AERO-ETL For finishing AERO End Mill High Speed Carbide End Mills for Aluminum Alloys Vol.4! New cutting data on specials! LINE UP High Speed Carbide End Mills for Aluminum Alloys AERO Series AERO-EXTL For finishing 3-flute,

More information

Present Situation and Problems on Aseismic Design of Pile Foundation By H. Hokugo, F. Ohsugi, A. Omika, S. Nomura, Y. Fukuda Concrete Journal, Vol. 29

Present Situation and Problems on Aseismic Design of Pile Foundation By H. Hokugo, F. Ohsugi, A. Omika, S. Nomura, Y. Fukuda Concrete Journal, Vol. 29 Present Situation and Problems on Aseismic Design of Pile Foundation By H. Hokugo, F. Ohsugi, A. Omika, S. Nomura, Y. Fukuda Concrete Journal, Vol. 29, No. 8, pp. 4-12, Aug. 1986 Synopsis The pile foundation

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F 01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

利隆塑料

利隆塑料 w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented

More information

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i 内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining

More information

無標題-1

無標題-1 Professional cranes & hoists for lifting SOFT START/STOP Reduction Gear Motor CHENG DAY MACHINERY WORKS CO., LTD. No. 173, Wen Chiu Road, Dajia District, Taichung City, 37 Taiwan. Tel: +88--288-1581 Fax:

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

PC_14ZY6_BFT150A_US_ indd

PC_14ZY6_BFT150A_US_ indd PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any

More information

タップ総合

タップ総合 1 2 3 4 N NEW タップシリーズ N Tap series ねじ加工に適した高バナジウムハイスの使用により 汎用タップながらも長寿命 高剛性設計で安定ねじ加工を実現 Nスパイラルタップ NSP By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads

More information

OSG Product Catalogue VOL-2.pdf

OSG Product Catalogue VOL-2.pdf TAPS SPIR POINTED TAP SERIES GENER APPLICATION EX-POT Suitable for through hole tapping of carbon steels, alloy steels and nonferrous metals whose chips are produced in continuous coil form. These taps

More information

0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin

More information

455-omote+

455-omote+ No.455 For steel industry and eavy industry Inserts and Holders or eavy duty turning SNMM Type inserts wit N and N cip reakers or Rouging RCMT Type inserts wit N Type cip reaker or cip control New coating

More information

磁気測定によるオーステンパ ダクタイル鋳鉄の残留オーステナイト定量

磁気測定によるオーステンパ ダクタイル鋳鉄の残留オーステナイト定量 33 Non-destructive Measurement of Retained Austenite Content in Austempered Ductile Iron Yoshio Kato, Sen-ichi Yamada, Takayuki Kato, Takeshi Uno Austempered Ductile Iron (ADI) 100kg/mm 2 10 ADI 10 X ADI

More information

The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Sh

The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Sh The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Shigeru Kitamura, Member Masaaki Sakuma Genya Aoki, Member

More information

58 W type W タイプコネクタとは 58 コネクタ S タイプ (M ターミナルタブ幅 2.8mm) の防水コネクタです W TYPE CONNECTOR: THE BLADE WIDTH OF THE MALE TERMINAL FOR THIS CONNECTOR IS IN

58 W type W タイプコネクタとは 58 コネクタ S タイプ (M ターミナルタブ幅 2.8mm) の防水コネクタです W TYPE CONNECTOR: THE BLADE WIDTH OF THE MALE TERMINAL FOR THIS CONNECTOR IS IN 58 W type W タイプコネクタとは 58 コネクタ S タイプ (タブ幅 2.8mm) の防水コネクタです W TYPE CONNECTOR: THE BLADE WIDTH OF THE FOR THIS CONNECTOR IS 0.110 INCHES./ SEALED TYPE OF 58 S TYPE CONNECTOR. [ 特徴 ] DISTINCTIVE FEATURES 1

More information

MRBTNH230

MRBTNH230 高硬度材への深彫り加工で真価を発揮する Show its higher ability by deep milling for high hard materials. 無限コーティングプレミアム ロングテーパーネック 2 枚刃ボールエンドミル MRBTNH230 MUGEN-COATING PREMIUM 2-Flute Long Taper Neck Ball End Mill 最適化したテーパーネック形状

More information

A Study on Throw Simulation for Baseball Pitching Machine with Rollers and Its Optimization Shinobu SAKAI*5, Yuichiro KITAGAWA, Ryo KANAI and Juhachi

A Study on Throw Simulation for Baseball Pitching Machine with Rollers and Its Optimization Shinobu SAKAI*5, Yuichiro KITAGAWA, Ryo KANAI and Juhachi A Study on Throw Simulation for Baseball Pitching Machine with Rollers and Its Optimization Shinobu SAKAI*5, Yuichiro KITAGAWA, Ryo KANAI and Juhachi ODA Department of Human and Mechanical Systems Engineering,

More information

Safety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------

More information

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed

More information

The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch

The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Chikara MINAMISAWA, Nozomu AOKI (Department of Mechanical

More information

高硬度金型(60HRC) の高速切削

高硬度金型(60HRC) の高速切削 High-Speed Cutting of Hardened (60HRC) Die Mold Kunio Naito, Kazutaka Ogo, Yasuhisa Takada, Kazuki Watanabe, Kenji Wada 40HRC60HRC 60HRC CBN Hardened die mold steels have been conventionally As a result

More information

<96BC8FCC96A290DD92E82D37>

<96BC8FCC96A290DD92E82D37> Integrated Operation & Programming Guidance with extremely simplified operations Integrated Operation & Programming Guidance with extremely simplified operations i FANUC MANUAL GUIDE i is an integrated

More information

K02LE indd

K02LE indd I Linear Stage Table of Contents 1. Features... 1 2. Description of part Number... 1 3. Maximum Speed Limit... 2 4. Specifications... 3 5. Accuracy Grade... 4 6. Motor and Motor Adaptor Flange... 4 6-1

More information

016-fujiseito-000

016-fujiseito-000 Machine table45kg Precision Metal Cutter Precision Metal Cutter FUJI KOSOKU. Precision Metal Cutters are powerful and efficient. Cutting surface is fine, free from burr or burnt and so precise as to save

More information

evel egarding the Transmission apability Table 1. The values given in the table are for a service factor of 1.Using the table on the right, please mod

evel egarding the Transmission apability Table 1. The values given in the table are for a service factor of 1.Using the table on the right, please mod NISSEI evel New Products evel gears atalog Number of NISSEI evel The catalog number systems of differs from other miter gears. 001 G F Hand of () Products Shape (Finished Shape) Surface finish () The haracteristics

More information

Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth

Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth and Foot Breadth Akiko Yamamoto Fukuoka Women's University,

More information

TK-M700…p†[…c…−…X…g

TK-M700…p†[…c…−…X…g TK Tape cutter device Machine models M700 Series / TK Series Parts Catalog INTRODUCTION This parts catalog covers the TK Series device. On pages 3-12, each mechanism is arranged on facing pages, the first

More information

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools

Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools Machining Performance of High-rate Facemilling Cutters with SWC Application Tetsutaro HOSHI, Itsuro BABA and Tadai MATSUMOTO To develop milling tools for high-rate machining of steels, prototype cutters

More information

62 Z type Z タイプコネクタとは 58 コネクタ W タイプの小型化 軽量化を図ったコネクタです Z TYPE CONNECTOR: MINIATURIZATION AND WEIGHT REDUCTION OF THE EXISTING W-TYPE CONNECTOR OF THE 5

62 Z type Z タイプコネクタとは 58 コネクタ W タイプの小型化 軽量化を図ったコネクタです Z TYPE CONNECTOR: MINIATURIZATION AND WEIGHT REDUCTION OF THE EXISTING W-TYPE CONNECTOR OF THE 5 62 Z type Z タイプコネクタとは 58 コネクタ W タイプの小型化 軽量化を図ったコネクタです Z TYPE CONNECTOR: MINIATURIZATION AND WEIGHT REDUCTION OF THE EXISTING W-TYPE CONNECTOR OF THE 58 SERIES. [ 特徴 ] DISTINCTIVE FEATURES 1 ターミナルが半挿入の場合

More information

UT(W1600).indd

UT(W1600).indd UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations

More information

Description

Description Metal Hybrid Inductor Description Metal Hybrid Inductor Magnetically shielded Suitable for Large Current Size: 4.3 x 4.3 x H2.1 mm Max. Product weight:.18g (Ref.) Halogen Free available Operating temperature

More information

アクアドリルシリーズ

アクアドリルシリーズ AQUA Drill Series EX Standard of high efficiency drilling and highly accurate drilling AQUA drill EX, enter the stage Realize high speed/high efficiency drilling with new flutes geometry and AQUA coating,

More information

Fig. 4. Configuration of fatigue test specimen. Table I. Mechanical property of test materials. Table II. Full scale fatigue test conditions and test

Fig. 4. Configuration of fatigue test specimen. Table I. Mechanical property of test materials. Table II. Full scale fatigue test conditions and test (J. Soc. Mat. Sci., Japan), Vol. 52, No. 11, pp. 1351-1356, Nov. 2003 Fatigue Life Prediction of Coiled Tubing by Takanori KATO*, Miyuki YAMAMOTO*, Isao SAWAGUCHI** and Tetsuo YONEZAWA*** Coiled tubings,

More information

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H) HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE

内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H)  HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE B7FY-0351-02 J E J 1 J 1 2 3 2 4 J 3 4 Preface Thank you very much for purchasing the hard disk drive. This hard disk drive provides a IDE interface and can be installed in the 3.5-inch storage bay of

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

PowerPoint プレゼンテーション

PowerPoint プレゼンテーション 一般機器用 For Consumer Products 汎用パワーインダクタ Common Power Inductors HER series RoHS HER327 HER427 HER527 HER627 HER88 HER9 特徴 直流重畳特性に優れている為 DC-DC コンバータ用インダクタとして最適 ドラムコアとリングコアに異なる磁性材料を使い電流特性を向上 * 既存同サイズと比べて電流特性を約

More information

03-03 Bush Mentori.pdf

03-03 Bush Mentori.pdf 54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se

More information

0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- EU/EX Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin

More information

Table 1. Main specifications of VAD plant. Fig. 2. Typical operating pattern of low alloy steel.

Table 1. Main specifications of VAD plant. Fig. 2. Typical operating pattern of low alloy steel. UDC 669. 184. 244. 66-251: 669. 046. 554-982 On the Operations of LD-VAD Process and Product Qualities Takaharu MORIYA and Masanori TAWARA Synopsis: VAD (Vacuum Arc Degassing) plant is characterized by

More information

Table 1. Reluctance equalization design. Fig. 2. Voltage vector of LSynRM. Fig. 4. Analytical model. Table 2. Specifications of analytical models. Fig

Table 1. Reluctance equalization design. Fig. 2. Voltage vector of LSynRM. Fig. 4. Analytical model. Table 2. Specifications of analytical models. Fig Mover Design and Performance Analysis of Linear Synchronous Reluctance Motor with Multi-flux Barrier Masayuki Sanada, Member, Mitsutoshi Asano, Student Member, Shigeo Morimoto, Member, Yoji Takeda, Member

More information

429

429 WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B

More information

LHHBAA+ArialMT Adobe Identity 0

LHHBAA+ArialMT Adobe Identity 0 13ヲ ヲオヲァヲャヲ ヲアヲゥヲイ ヲウヲァヲイ ヲェヲエヲ ヲ ヲアヲュヲァヲイヲ ヲクヲイ (ヲウヲ ヲエヲカヲッヲイ 6メ2ヲ ヲエヲウヲ ヲアヲッ) 30965 2009-12-23 ICS: 93.040 1 71 71 71 7 1 71 7 1501-03-05-02-01:2009 1 71 71 71 71 71 71 71 7 TEXNIKH 1 71 71 71 71 71

More information

Influence of Material and Thickness of the Specimen to Stress Separation of an Infrared Stress Image Kenji MACHIDA The thickness dependency of the temperature image obtained by an infrared thermography

More information

Nachi - AQDEX

Nachi - AQDEX The next generation solid carbide drill Series Series AQDEX AQDEXR AQDEXOH3D AQDEXOH5D AQDEXOH8D 3D 5D Realize stable, high efficiency drilling in wide area, from medium and low speed up to high speed

More information

音響部品アクセサリ本文(AC06)PDF (Page 16)

音響部品アクセサリ本文(AC06)PDF (Page 16) Guide for Electret Condenser Microphones A microphone as an audio-electric converting device, whose audio pickup section has a structure of a condenser consisting of a diaphragm and a back plate opposite

More information

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3 BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted

More information

一般用 TiCN スパイラルタップ Symbol:SFT-TiCN TiCN Coated Spiral Fluted Tap TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistan

一般用 TiCN スパイラルタップ Symbol:SFT-TiCN TiCN Coated Spiral Fluted Tap TiN コーティングに比べ対磨耗性 反溶着性に優れ軟質材から硬質材まで幅広く使用できます (TiCN coating has a good welding resistan スパイラルタップ シリーズ Spiral Fluted Tap Series 一般用スパイラルタップ ( ネック付きタイプ ) Symbol:SFT / SFT-OX Spiral Fluted Tap For General Application (Neck Type) 1. 止まり穴用 1. For Blind Holes. 2. 切りくずが コイルのようにカールして排出される被 2. Materials

More information

Fig. 3 Coordinate system and notation Fig. 1 The hydrodynamic force and wave measured system Fig. 2 Apparatus of model testing

Fig. 3 Coordinate system and notation Fig. 1 The hydrodynamic force and wave measured system Fig. 2 Apparatus of model testing The Hydrodynamic Force Acting on the Ship in a Following Sea (1 St Report) Summary by Yutaka Terao, Member Broaching phenomena are most likely to occur in a following sea to relative small and fast craft

More information

Manufacturing Processes Machining Casting Process Welding, Bonding and Cutting Plastic Working Cutting Process Abrasive Machining

Manufacturing Processes Machining Casting Process Welding, Bonding and Cutting Plastic Working Cutting Process Abrasive Machining I Academic English I Lesson 11 Manufacturing Processes Machining Casting Process Welding, Bonding and Cutting Plastic Working Cutting Process Abrasive Machining Machining 1 primary forming process secondary

More information

チョークコイル・リアクタ

チョークコイル・リアクタ THIN TRNSORMRS (MPT TYP) OMSTI(JPN) U S I TYP MPT MPT series are available for the thinner-sized sets and suit to I standard. H MPT I KS5535 KS6435 KS7235 KS7250 KS7270 KS9640 KS9660 KS9680 KS00 75.0 67.0

More information

第122号(A4、E)(4C)/3 宇野ほか

第122号(A4、E)(4C)/3 宇野ほか trans Development of high performance heat resistant transparent polyimides based on trans-,,, -cyclopentanetetracarboxylic dianhydride Takaaki Uno Takashi Okada Igor Rozhanskii Toshimitsu Kikuchi Kohei

More information

5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²

More information

Connectors for Automobiles 62 SEALED SERIES Japanese English

Connectors for Automobiles 62 SEALED SERIES Japanese English Connectors for Automobiles 62 SEALED SERIES Japanese English 62 P-01 62 P-02 ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5 20.8 2.1 M(1400-0434) F(1400-0432) ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5

More information

WIF6002-e

WIF6002-e Installation and Operating Instructions Sartorius IF.. Standard and IF...CE Verifiable Models Flat-bed Scale 98648-012-37 2 ! 3 4 5 6 7 General View of the Equipment 2 4 1 3 5 6 1 Weighing platform 2 Handles

More information

年次大会原稿最終.PDF

年次大会原稿最終.PDF Structural Analysis of Coating Layer Containing Plastic Pigments Yoko Saito, Hideki Touda, Junji Kasai ZEON Corporation Hitomi Hamada, Toshiharu Enomae, Fumihiko Onabe The University of Tokyo Recently,

More information

H1-H4

H1-H4 No.489 Plunging Tools SEC-PDL/ SEC - SEC-Plunge Drill PDL Type/ SEC-Plunge Mill Type Having an edge in pocketing and deep contour milling! Lineup of 10 items each from the PDL type / type! Achieving stable

More information

- 1 -

- 1 - - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - 1 2 1-16 - 2 3 4 5 6 7-17 - 1 2 1 2 3 4-18 - 1 2 3 4 1 2-19 - 1 2 3 1 2-20 - 3 4 5 6 7 1-21 - 1 2 3 4-22

More information

Title < 論文 > 多重債務者の救済活動 : ある 被害者の会 のエスノグラフィー Author(s) 大山, 小夜 Citation 京都社会学年報 : KJS = Kyoto journal of so 113-137 Issue Date 1998-12-25 URL http://hdl.handle.net/2433/192561 Right Type Departmental Bulletin

More information

1..FEM FEM 3. 4.

1..FEM FEM 3. 4. 008 stress behavior at the joint of stringer to cross beam of the steel railway bridge 1115117 1..FEM FEM 3. 4. ABSTRACT 1. BackgroundPurpose The occurrence of fatigue crack is reported in the joint of

More information

High-reliability metal powder products for high technology applications To create innovative materials that will help build the industrial foundation

High-reliability metal powder products for high technology applications To create innovative materials that will help build the industrial foundation Metal Powders and Powder Metallurgy Products SANYO SPECIAL STEEL - the Confident Choice SANYO SPECIAL STEEL High-reliability metal powder products for high technology applications To create innovative

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

10生活環境研究報告.indd

10生活環境研究報告.indd It is well known that there are great differences among the flow characteristics of a non- Newtonian fluid such as gelatinized starch dispersions, depending on the analytical devices used and measurement

More information

Photo. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a

Photo. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a Work Rolls in Hot Strip Mills Hidemaro KAWAHARA Synopsis: The work roll materials in hot strip mills and the damages of rolls which arise in rolling operation are discussed in this paper. As for the rolls

More information

ねじ切り丸ダイスROUND DIES 819 本カタログに掲載されている製品につきましては 在庫表記を記載しておりますが 新材種 新製品などの開発にともない改廃される場合もございます 予告なく仕様 形状 表内の値等が変更となる場合がございます The inventory status is indi

ねじ切り丸ダイスROUND DIES 819 本カタログに掲載されている製品につきましては 在庫表記を記載しておりますが 新材種 新製品などの開発にともない改廃される場合もございます 予告なく仕様 形状 表内の値等が変更となる場合がございます The inventory status is indi 切り丸ダイス 819 本カタログに掲載されている製品につきましては 表記を記載しておりますが 新材種 新製品などの開発にともない改廃される場合もございます 予告なく仕様 形状 表内の値等が変更となる場合がございます The inventory status is indicated for respective products on this catalogue. However, the products

More information

TOOL STORAGE CABINET REMOVABLE TOOL STORAGE CABINET 373

TOOL STORAGE CABINET REMOVABLE TOOL STORAGE CABINET 373 373 Removable Tool Storage Cabinet MS8Shelves can be combined as desired Removable doors Size Weight 60kg/shelf Shelves Order a total of 8 shelves per cabinet Shelf Part No.TD50 Removable type Shelf Part

More information

ScanFront300/300P セットアップガイド

ScanFront300/300P セットアップガイド libtiff Copyright (c) 1988-1996 Sam Leffler Copyright (c) 1991-1996 Silicon Graphics, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby

More information

P038-046.@10.k...@...i.ec6

P038-046.@10.k...@...i.ec6 On repairing the masonry wall of the castle Kanazawa KITANO Hiroshi This study considers the method of studying the masonry wall of the castle in the Kinsei era, taking the castle Kanazawa in Ishikawa

More information

02-03 HSK-AEFC.indb

02-03 HSK-AEFC.indb H S K 267 CTSA New Super tite-lock Milling Chuck Slim design milling chuck. Specially designed slits enables heavy endmilling. Multibore tool system 5690 13416075 HSK40A -CT16SA - 75 1 2 16 45 75 50 26

More information

IT i

IT i 27 The automatic extract of know-how search tag using a thesaurus 1160374 2016 2 26 IT i Abstract The automatic extract of know-how search tag using a thesaurus In recent years, a number of organizational

More information

untitled

untitled GENERAL CATALOGUE Vol.-11 Abbreviation Name Page Appearance Size Carbide Reamers Cermet Reamers Carbide Miniature Drill Point Setter High Speed Steel Reamers Adjustable Reamers Order Made High Speed Steel

More information

No488_1804

No488_1804 PRODUCT S No. 488 SERIES EXPANSION Spot facing drill Spot facing drill with point angle of 180 (flat face). Size range: 1-14mm dia. JCTMA 2015-018 ECO PRODUCT Flat Face Application Spot facing slope Spot

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

KSKH(MX).indd

KSKH(MX).indd KS/KH Chain cutter device Machine models MX Series Parts Catalog INTRODUCTION This parts catalog covers the KS,KH device which are manufactured in November, 2003. The components are shown on pages 4-7.

More information

untitled

untitled SUBJECT: Applied Biosystems Data Collection Software v2.0 v3.0 Windows 2000 OS : 30 45 Cancel Data Collection - Applied Biosystems Sequencing Analysis Software v5.2 - Applied Biosystems SeqScape Software

More information