RCP-700/701

Size: px

Start display at page:

Download "RCP-700/701"

あやかうえや
1 years ago
Views:

1 REMOTE CONTROL PANEL RCP-700/701 * * OPERATION MANUAL 1st Edition (Revised 4) Japanese/English

2 For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. For customers in Canada This Class A digital apparatus complies with Canadian ICES-003. Pour les utilisateurs au Canada Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For the customers in Europe This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: EN : Electromagnetic Interference (Emission) EN : Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors) and E4 (controlled EMC environment, ex. TV studio). Pour les clients européens Ce produit portant la marque CE est conforme à la Directive sur la compatibilité électromagnétique (EMC) (89/336/CEE) émise par la Commission de la Communauté européenne. La conformité à cette directive implique la conformité aux normes européennes suivantes: EN : Interférences électromagnétiques (émission) EN : Sensibilité électromagnétique (immunité) Ce produit est prévu pour être utilisé dans les environnements électromagnétiques suivants: E1 (résidentiel), E2 (commercial et industrie légère), E3 (urbain extérieur) et E4 (environnement EMC contrôlé, ex. studio de télévision). Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung Und erfüllt die EMV-Richtlinie (89/336/EWG) der EG- Kommission. Angewandte Normen: EN : Elektromagnetische Verträglichkeit (Störaussendung) EN : Elektromagnetische Verträglichkeit (Störfestigkeit), für die folgenden elektromagnetischen Umgebungen: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrieller Bereich), E3 (Stadtbereich im Freien) und E4 (kontrollierter EMV- Bereich, z.b. Fernsehstudio).

3 1(J)

4 2(J)

5 3(J) CLOSE OPEN SENS COARSE ALARM PREVIEW REMOTE CONTROL PANEL REMOTE CONTROL PANEL IRIS MASTER BLACK AUTO MASTER SLAVE WHITE BLACK IRIS/MB ACTIVE EXT CALL BLACK WHITE S PANEL ACTIVE OPEN CLOSE SENS COARSE ALARM IRIS AUTO MASTER SLAVE WHITE BLACK IRIS/MB ACTIVE EXT CALL BLACK WHITE S PANEL ACTIVE !º! !º!!!!!!!!!!! 6 9 5

6 1! !º!! 4(J)

7 !!!!!!! 5(J)

8 PREVIEW REMOTE (J)

9 7(J)

10 Table of Contents Overview... 2(E) Location and Function of Parts and Controls... 3(E) Operation Panel... 3(E) Connector Panel... 6(E) Specifications... 7(E) Manuals for the BVP-700-series video camera system Three types of manuals are provided for the BVP-700-series video camera system: an Operation Manual, a Maintenance Manual, and a System Manual. The Operation and Maintenance Manuals are provided for each device used in the system, and the System Manual is provided as an option. In the Operation Manual, specific functions and characteristics of the device, such as features, functions of each part and specifications, are described. In the Maintenance and System Manuals, you will find general information on the system, such as possible system configurations, the setup method, connections, and system preparations and operations. 1(E)

11 Overview The RCP-700/701 Remote Control Panel is designed for remote control of elementary functions of the BVP-700-series Color Video Camera. The panel is used in connection with another RCP-series Remote Control Panel (such as RCP-740/741) via a special cable. It can also be directly connected to the CCU-700/700P Camera Control Unit or the CNU-700 Camera Command Network Unit. The RCP-700 and RCP-701 are completely identical in their functions except with respect to the iris and master black adjustments. For the iris and master black adjustments, the RCP-700 uses a joystick-type control, while the RCP-701 uses rotary knobs. The iris and master black adjustments on the RCP- 700/701 are always made in Absolute mode. The principal features of the RCP-700/701 are as follows. Control parts arrangement for high operability The parts required to control the elementary functions of the BVP-700-series cameras are arranged for highest possible operability. This enables smooth operations even in limited panel space. Flexible camera control through use in combination with another control panel You can use this panel to quickly control elementary functions and, when more detailed adjustments are required, other RCP-series panels or the MSU-700 Master Setup Unit. Thus, through combined use with other controllers, the most desirable operating emvironment can be flexibly selected according to conditions. Signal transmission via a digital line Between this remote control panel and another unit, signals are digitally transmitted via a single connection cable (CCA-5), ensuring a reliable signal. Six units mountable on a 19-inch rack Up to six units of this control panel can be mounted in a line on a 19-inch EIA standard rack. The height is four rack units. 2(E)

12 Location and Function of Parts and Controls Operation Panel RCP-700 S PANEL ACTIVE 1 PANEL ACTIVE button 2 WHITE button 3 BLACK button WHITE BLACK CALL 4 CALL button WHITE 5 WHITE knobs BLACK 6 BLACK knobs MASTER SLAVE 7 EXT indicator! AUTO button! Camera number/ tally indication window AUTO EXT IRIS/MB ACTIVE SENS 8 IRIS/MB ACTIVE button 9 SENS control knob!º COARSE control knob! Master black control ring CLOSE OPEN COARSE ALARM! ALARM indicator! IRIS control lever/preview switch IRIS REMOTE CONTROL PANEL 1 PANEL ACTIVE button 2 WHITE button 3 BLACK button RCP-701 S PANEL ACTIVE WHITE BLACK CALL 4 CALL button WHITE 5 WHITE knobs BLACK 6 BLACK knobs! AUTO button! Camera number/ tally indication window! MASTER BLACK control MASTER AUTO MASTER BLACK SLAVE EXT IRIS/MB ACTIVE SENS 7 EXT indicator 8 IRIS/MB ACTIVE button 9 SENS control knob!º COARSE control knob CLOSE OPEN COARSE ALARM! ALARM indicator! IRIS control! Iris gauge! PREVIEW button IRIS PREVIEW REMOTE CONTROL PANEL 3(E)

13 Location and Function of Parts and Controls Parts common to the RCP-700/701 Items 1 through! are common to the RCP-700 and RCP PANEL ACTIVE button Press and light up the button to permit this panel to control the camera system (Panel active status). The IRIS/MB ACTIVE button also lights. 2WHITE (white balance) button Press to automatically adjust the white balance. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit, the automatic adjustment is canceled and the button flashes. To stop the flashing, press the button again. Note If an error occurs during adjustment, the pressed button flashes. 3BLACK (black balance) button Press to automatically adjust the black balance and black set. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit, the automatic adjustment is canceled and the button flashes. To stop the flashing, press the button again. Note If an error occurs during adjustment, the pressed button flashes. 6BLACK (black balance manual adjustment) knobs Used to manually adjust the black balance. Adjust the R and B signals, respectively. 7EXT (lens extender) indicator Lights when the lens extender is used. 8IRIS/MB ACTIVE (iris/master black active) button Press and light up this button to enable the iris/ master black control block of the panel. When the PANEL ACTIVE button is pressed, this button also lights. 9SENS (sensitivity) control knob Used for manual iris adjustment. See the table Iris adjustment functions on the next page.!ºcoarse control knob Used for manual iris adjustment. See the table Iris adjustment functions on the next page.! ALARM indicator Lights when trouble occurs in the camera system and the self-diagnostic function activates at the video camera or the CCU-700/700P.! AUTO button Press and light the button to automatically adjust the iris according to the amount of input light. If you press the button when lit, it goes dark and manual iris adjustment is enabled. 4CALL button Press to send a call signal to the video camera, on which the CALL button lights. The tally lamps on the camera and the red tally lamp on the CCU-700/ 700P light when not lit, or go dark when lit. When the CALL button on the video camera is pressed, the CALL button on this panel lights and a buzzer sounds. 5WHITE (white balance manual adjustment) knobs Used to manually adjust the white balance. Adjust the R and B signals, respectively. 4(E)

14 ! Camera number/tally indication window (incorporated with MASTER/SLAVE indications) The number of the camera being controlled from this panel is displayed in orange. When a red tally signal is sent to the camera, the number is displayed in black and the background of the number lights in red. When a green tally signal is sent to the camera, the number is displayed in black and the background of the number lights in green. When both red and green tally signals are simultaneously sent, the left half of the background lights in red and the right half lights in green. In Master/Slave mode to adjust the white balance of multiple cameras, the upper-left (MASTER) corner lights in orange when the camera being controlled from this panel is designated as the master unit, and the upper-right (SLAVE) corner lights in orange when designated as a slave unit. RCP-700-exclusive parts! Master black control ring Turn to manually adjust the master black.! IRIS control lever/preview switch When the AUTO button is not lit, you can adjust the iris manually by moving this lever. When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with this lever. Push it axially to connect the key signal for preview at the PREVIEW connector. See the table Iris adjustment functions below. RCP-701-exclusive parts! MASTER BLACK control Manually adjust the master black.! IRIS control When the AUTO button is not lit, you can adjust the iris manually by turning the control. When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with this control. See the table Iris adjustment functions shown left below.! Iris gauge The white line on the gauge provides a click position for the IRIS control. Turn the gauge to set the line to the most frequently used iris position, and it can be used as the reference for manual iris adjustment. The gauge rotates infinitely in either direction. When no click position is required, set the line outside the rotation range of the IRIS control.! PREVIEW button Connects the key signal for preview at the PREVIEW connector. Iris adjustment functions IRIS lever (RCP-700) IRIS control (RCP-701) COARSE control SENS control Adjusts the iris within the variable range set by the SENS and COARSE controls. Sets the lower limit for CLOSED. Sets the upper limit for OPEN according to CLOSED value set by the COARSE control. 5(E)

15 Location and Function of Parts and Controls Connector Panel PREVIEW REMOTE 2 REMOTE connector 1 PREVIEW connector 1PREVIEW connector (6-pin) Supplies preview signals. The RCP-701 receives the power from an external device, such as a video switcher, to light the PREVIEW button through this connector. 2REMOTE connector (8-pin) Connect to the RCP/CNU connector of the CCU- 700/700P, the RCP connector of the CNU-700 or the AUX connector of another RCP-series Remote Control Panel. 6(E)

16 Specifications General Power requirements 10 to 30 V DC Power consumption 2 W max. Maximum cable length 200 m (656 feet) Operating temperature 0 C to 45 C (32 F to 113 F) Dimensions mm (w/h/d) (2 3 / /4 inches) including projecting parts and controls Mass 0.9 kg (2 lb) Inputs/outputs REMOTE 8-pin multiconnector (1) PREVIEW 6-pin (1) Supplied accessories 6-pin plug for preview (1) Operation Manual (1) Design and specifications are subject to change without notice. 7(E)

17 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.

18 * * RCP-700/701 (SY) Sony Corporation Printed in Belgium

MIDI_IO.book

MIDI_IO.book MIDI I/O t Copyright This guide is copyrighted 2002 by Digidesign, a division of Avid Technology, Inc. (hereafter Digidesign ), with all rights reserved. Under copyright laws, this guide may not be duplicated