Options(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet si
|
|
|
- ゆみか にいだ
- 5 years ago
- Views:
Transcription
1 AC Fan 6mm sq. San Ace 6 28mm thick, 38mm thick General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) mm Mass:12g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy /6 5/4.6/.5.7/.6 2,25/2,7.27/ / / /.75 24/26-3 to +7 25, /.5 Dimensions(Unit : mm) Mounting Hole AIR FLOW Lead Wire AWG26 UL143 1 M4.7 Earth Ground tap Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening(unit : mm) Inlet side Outlet side Wiring diagram C 5.3 FANA
2 Options(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Resin finger guards Model :19-13G AC Fan 6mm Resin filter kits Model :19-13F13(13PPI),19-13F2(2PPI) :19-13F3(3PPI),19-13F4(4PPI) Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V Air Flow CFM 6mm
3 AC Fan 6mm sq. General Specifications Rotating Direction 5.3 San Ace 6 Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) mm Mass:17g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy /6 6/ /.6.7/.6 Dimensions(Unit : mm) Reference dimension of mounting holes and vent opening(unit : mm) Inlet side thick, 38mm thick.8/.7.8/.7 2,6/3,15.33/ / / /.94 28/3-3 to +6 25, Mounting Hole AIR FLOW 1 Lead Wire AWG26 UL143 M4.7 Earth Ground tap Air Flow Direction Wiring diagram Outlet side 58 C mm FANA
4 Options(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Resin finger guards Model :19-13G AC Fan 6mm Resin filter kits Model :19-13F13(13PPI),19-13F2(2PPI) :19-13F3(3PPI),19-13F4(4PPI) Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V CFM 6mm
5 AC Fan 8mm sq. General Specifications Rotating Direction 78 San Ace 8 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) 8 8 2mm Mass:18g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy [V] [Hz] [W] [A] [A] [min -1 ] [m³/min] (CFM] [Pa] [inchh ² O] [db(a)] [ ] [h] /6 6/ /.5.6/.5 Dimensions(Unit : mm) Lead Wire AWG22 UL143 Reference dimension of mounting holes and vent opening(unit : mm) Inlet side C FANAthick.7/.6.7/.6 2,5/3,.44/ / / / /31-3 to +6 25, Mounting Hole M4.7,6mm M4.7 6 deep Earth Ground tap 3L AIR FLOW Air Flow Direction Wiring diagram Outlet side mm
6 Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet 吐出側 side Resin finger guards Model :19-12G AC Fan 8mm mm Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet 吸込側 side,, 吐出側兼用 Outlet side Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V Air Flow CFM
7 8.5 AC Fan 8mm sq. General Specifications Rotating Direction San Ace mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Storage Temperature -3 to+7 (Non-condensing) mm Mass:27g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S5 1.12/.1.13/.11 19S /.8.11/.9 19S51 2.6/.5.6/.5 19S /.4.5/.4 5/6 9/7 19S3 1.12/.1.13/.11 19S /.8.11/.9 19S31 2.6/.5.6/.5 19S /.4.5/.4 Dimensions(Unit : mm) Mounting Hole C FANAthick 2,65/3,1.63/ / / /.154 3/33 2,35/2,7.55/ / / / /3 28MAX. 26 M4.7,6mm M4.7 6 deep Earth Ground tap AIR FLOW Wiring diagram Outlet side mm Air Flow Direction Reference dimension of mounting holes and vent opening(unit : mm) Inlet side to +6 25, 78
8 Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet side Resin finger guards Model :19-12G AC Fan 8mm Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet side, Outlet side <PS>E JET ORIEX 3A 25V Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L L 5 Flat 2 2-core vinyl cord VFF.75mm 2 2 Black R R1.5 R1 6 L 5 1 Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V Hz 1V 5Hz 1V Air Flow 19S5 19S53 19S51 19S54 m 3 /min CFM Air Flow 19S3 19S33 19S31 19S34 CFM 8mm
9 AC Fan 8mm sq. General Specifications Rotating Direction San Ace 8 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Storage Temperature -3 to+7 (Non-condensing) mm Mass:4g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy /.11.17/ /.1.14/.12 5/6 9/ /.6.9/ /.5.8/.7 Dimensions(Unit : mm) Mounting Hole Reference dimension of mounting holes and vent opening(unit : mm) Inlet side C FANAthick 2,7/3,15.9/ / / / /39-3 to +6 25, M4.7,6mm M4.7 6 deep Earth Ground tap AIR FLOW Air Flow Direction Wiring diagram Outlet side mm
10 Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet 吐出側 side Resin finger guards Model :19-12G AC Fan 8mm Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet side, Outlet side Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L <PS>E JET ORIEX 3A 25V L 5 Flat 2 2-core vinyl cord VFF.75mm 2 2 Black R R1.5 R1 6 L 5 1 Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V Air Flow CFM 8mm
11 AC Fan 8mm sq. General Specifications M4.7 6,6mm deep Earth Ground tap San Ace Mounting Hole Rotating Direction mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Storage Temperature -3 to+7 (Non-condensing) mm Mass:41g Specifications represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-4UL UL /.1.14/.12 1/ UL 2.7/.6.8/.7 5/ UL 23.6/.5.7/ UL 1 4/ UL 115.4/.4.4/.4 Dimensions(Unit : mm) Reference dimension of mounting holes and vent opening(unit : mm) Inlet side C FANAthick.13/.11.16/.14 2,65/3,1.85/1. 3./ / /.142 4/44.5/.5.5/.5 1,5/1,5.43/ / /8.8.35/.35 24/ Air Flow Direction Wiring diagram Outlet side mm to +6 25, 78
12 Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet side Resin finger guards Model :19-12G AC Fan 8mm Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet 吸込側 side,, 吐出側兼用 Outlet side Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-8-L1/489-8-L21/489-8-L Flat 2 2-core vinyl cord VFF.75mm 22 Black <PS>E JET ORIEX 3A 25V L 5 1 Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L 35 3,5 Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V Air Flow 19-4UL 19-43UL 19-41UL 19-44UL CFM Hz 1V 5Hz 1V Air Flow 19-47UL 19-33UL CFM 8mm
13 AC Fan 92mm sq. San Ace 92 25mm thick, 25mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! black Sensor yellow mm Mass:29g / 31g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S /.9.13/.12 8/7 19S /.8.11/.1 2,7/3,1.95/ / / / /38 19S /1.7/.6.8/.8 19S /9.6/.5.7/.7 19S95 1 5/6 8/7.1 /.9.11/.1 2,4/2,8.84/ / / / /35 19S96 1.9/.8.9/.8 7/6 19S /.7.8/.7 1,5/1,7.55/ / /16.3.5/.65 24/27 19S /.5.6/.5 8/7 19S /.4.5/.4-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S /.9.13/.12 8/7 19S /.8.11/.1 2,7/3,1.95/ / / / /38 19S /1.7/.6.8/.8 5/6 19S /9.6/.5.7/.7 19S495 8/7.1 /.9.11/.1 2,4/2,8.84/ / / / / S496 7/6.9/.8.9/.8 1,5/1,7.55/ / /16.3.5/.65 24/27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,
14 Dimensions(Unit : mm) Standard MAX Mounting Hole AIR FLOW Reference dimension of mounting holes and vent opening(unit : mm) Standard M4.7 6,6mm deep Earth Ground tap Inlet side, Outlet side AC Fan 92mm Rotating Direction Air Flow Direction L Sensor-Purpose AWG28 Lead Wire Length UL17 3L 3L AWG UL MAX Mounting Hole M4.7 6 M4.7 6,6mm deep Earth Ground tap AIR FLOW AIR FLOW Inlet side, Outlet side Rotating Direction Air Flow Direction Wiring diagram Standard C FANASensor C with FANA(For fan power supply) Sensor circuit 5V Brown Yellow 4.5V to 5.5V 1mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V Sensor circuit Brown Yellow Black 9.6V to 14.4V 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. 12V Sensor output V 92mm 2 2
15 AC Fan 92mm sq. San Ace mm Mass:29g / 31g() Options(Unit : mm) Finger guards Model :19-99C Surface treatment :Nickel-chrome plating (silver) Outlet side 吐出側 Resin finger guards Model :19-11G Model :19-99E :19-99H Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Resin filter kits Model :19-11F13(13PPI),19-11F2(2PPI) :19-11F3(3PPI),19-11F4(4PPI) Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L <PS>E JET ORIEX 3A 25V L 2 Flat 2-core vinyl cord VFF.75mm 2 2 Black 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L R R R1 6 L 5 1 Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1
16 mm AC Fan 92mm Air Flow and Static Pressure Characteristics Standard 6Hz 1V 5Hz 1V Hz 1V 5Hz 1V Hz 1V 5Hz 1V 19S91 19S93 19S92 19S94 CFM.5 19S CFM S96 19S193 19S192 19S CFM Hz 1V 5Hz 1V Hz 1V 5Hz 1V Hz 1V 5Hz 1V Air Flow 19S491 19S493 19S492 19S494 5 CFM.5 19S CFM S CFM 22
17 AC Fan 12mm sq. San Ace 12 25mm thick, 25mm thick() 38mm thick, 38mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! black Sensor yellow mm Mass:37g / 39g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S /.14.19/.17 19S /.12.16/ /12 2,5/2,9 1.92/ / S88 2.8/.7.1 /.9 49 / / /41 19S /.6.8/.7 19S81 1 5/ /.1 19S /.9 9.5/8.5 19S /.6 2,2/2, / / / /.16 34/35 19S /.5 19S /1.14/.12.15/.13 1,4/1,6 1.11/ / / /.79 24/27-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S /.14.19/.17 19S /.12.16/ /12 25/29 19S /6.8/.7.1 / / / /52.193/.29 38/41 19S /.6.8/.7 19S /1.14/.12.15/.13 14/ / / / /.75 24/27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,
18 Dimensions(Unit : mm) Pull-up resistor Inlet side MAX M4.7, M mm deep Earth Ground tap AIR FLOW Mounting Hole Rotating Direction Air Flow Direction Sensor-Purpose Lead Wire 3L 26MAX. Length 26 AWG28 AGW UL17 UL17 Mounting Hole Standard M4.7 6,6mm deep Earth Ground tap AIR FLOW Rotating Direction Air Flow Direction Wiring diagram Standard 5V (For fan power supply) Brown 4.5V to 5.5V Yellow 1mA MAX. 27.6V MAX. Black Sensor output V C FANAC FANA Sensor circuit Reference dimension of mounting holes and vent opening(unit : mm) 117 Sensor circuit 12V Brown Yellow Black Outlet side V to 14.4V Sensor output V mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 12mm 12mm
19 AC Fan 12mm sq. San Ace mm Mass:37g / 39g() Model :19-19E 12 12mm * Surface treatment :Nickel-chrome plating (silver) :19-19K 19-19E :Cation electropainting (black) 19-19K Inlet side, Outlet side Options(Unit : mm) Finger guards Model :19-19C 12 12mm ** Surface treatment :Nickel-chrome plating (silver) :19-19H 19-19C :Cation electropainting (black) 19-19H Outlet side Resin finger guards 12 12mm * Model :19-1G 19-19E K Resin filter kits Model :19-1F13(13PPI),19-1F2(2PPI) :19-1F3(3PPI),19-1F4(4PPI) Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L <PS>E JET ORIEX 3A 25V L Flat 2 2-core vinyl cord VFF.75mm 2 2 Black 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L R R R1 6 L 5 1 Model Power cord length(mm) ー L1 1, ー L21 2,1
20 AC Fan 12mm Air Flow and Static Pressure Characteristics Standard Hz 1V 5Hz 1V Hz 1V 5Hz 1V Hz 1V 5Hz 1V CFM CFM S85 19S84 19S88 19S S81 19S83 19S82 19S S86 2 CFM Hz 1V 5Hz 1V Hz 1V 5Hz 1V CFM 19S485 19S484 19S488 19S CFM Air Flow 19S486 12mm
21 AC Fan 12mm sq. San Ace 12 25mm thick, 25mm thick() 38mm thick, 38mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! black Sensor yellow mm Mass:55g / 58g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S75UL 1.24/.21.32/.28 19S74UL /.18.27/.24 18/16 19S78UL 2.12/.1.16/.14 2,7/3,1 2.5/ / / / /45 19S72UL 23.11/.9.14/.13 19S5 19S5UL 1.18/.16.25/.22 19S /.14.21/.18 19S24UL /12 19S8 2.9/.8.13/.11 19S8UL 2,7/3,1 2.35/ / / /.264 4/43 19S25 5/ S25UL.8/.7.11/.9 19S29UL 14/12.18/.16.23/.21 2,45/2,7 2.15/ / / / /4 19S13 19S13UL 1 13/11.16/.14.16/.15 1,8/2, 1.54/ / /27.96/.18 3/32 19S6 7/7.1 /.9.1 /.9 1,65/1,7 1.45/ / / /.71 28/28 19S6UL 115 1/1.13/.11.13/.11 1,8/1,9 1.56/ / /2.6.8/.83 3/31 19S1 2 7/7.5/.4.5/.4 1,65/1,7 1.45/ / / /.71 28/28 19S1UL 24 11/11.6/.5.6/.5 1,8/1, / / / /.87 3/32-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S45UL 1.18/.16.25/.22 19S424UL /.14.21/.18 2,7/3,1 2.35/2.7 83/ / /.264 4/43 19S48UL 2 14/12.9/.8.13/.11 19S425UL 23.8/.7.11/.9 19S429UL.18/.16.23/.21 2,45/2,7 2.15/ / / / /4 1 5/6 19S46UL 7/6.9/.8.1 /.9 1,65/1,7 1.45/1.5 51/ / /.71 28/28 19S475UL 1.24/.21.32/.28 19S474UL /.18.27/.24 18/16 2,7/3,1 2.5 / / / / /45 19S478UL 2.12/.1.16/.14 19S472UL 23.11/.9.14/.13 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,
22 Dimensions(Unit : mm) Mounting Hole AIR FLOW Mounting Hole Rotating Direction Air Flow Direction Rotating Direction Wiring diagram Standard C FANAC Standard FANA (For fan power supply) Sensor circuit 5V Sensor-Purpose Lead Wire 3L Length AWG2828 UL AIR FLOW Air Flow Direction Brown Yellow V to 5.5V Reference dimension of mounting holes and vent opening(unit : mm) Inlet side mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V 117 Sensor circuit 12V Brown Yellow Black Outlet side V to 14.4V Sensor output V mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 12mm 12mm
23 AC Fan 12mm sq. San Ace mm Mass:55g / 58g() Options(Unit : mm) Finger guards Model :19-19C 12 12mm ** Surface treatment :Nickel-chrome plating (silver) :19-19H 型番 :19-19C :Cation : electropainting (black) :19-19H : 電 Outlet side φ ー φ1.6 φ1.6 φ113 φ Resin finger guards 12 12mm * Model :19-1G 型番 :19-19E : :19-19K : 電 φ1.6φ1.6 φ φ18.6 φ φ4.3.3 Model :19-19E 12 12mm * Surface treatment :Nickel-chrome plating (silver) 型番 :19-19E : :19-19K :Cation electropainting (black) :19-19K : 電 Inlet side, Outlet side φ1.6φ1.6 電 φ φ Resin filter kits Model :19-1F13(13PPI),19-1F2(2PPI),19-1F3(3PPI),19-1F4(4PPI) φ4.3.3 φ148 4-φ Filter kits Model :19-18 Applicable models:ac Fan mm 8.5 (64) Screen kits Model :19-2 Applicable models:ac Fan mm Neither filterkit nor screenkit can be installed on fans with sensor Plug cord Exclusive for fans without UL at the end of the model number. (Products compliant with Electrical Appliance and Material Safety Law) Model:489-6-L1/489-6-L21/489-6-L IN G <PS> E JET ORIEX 3A 25V 24 4 G 6 L VSF1.25mm 2 2 For ー ground,black 用, 5 1 Flat 2 2-core vinyl ー コード cord VFF.75mm 2 Black IN G Exclusive for fans with UL at the end of the model number. (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L21/ L <PS>E JET ORIEX 3A 25V R1 G L 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-7-L1/489-7-L21 UL115 AWG18 For ー ground,green/yellow 用, / spiral Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L35 3,5 L 5 1 Flat 2 2-core vinyl ー コード cord ULSPT-1 AWG18 Black AWG18
24 Air Flow and Static Pressure Characteristics Standard Hz 1V 6 5 5Hz 1V Hz 1V 5 4 5Hz 1V CFM CFM CFM 19S75UL 19S74UL 19S5 19S5UL 19S29UL 19S78UL 19S72UL 19S24 19S24UL 19S8 19S8UL 19S25 19S25UL Hz 1V 5 5Hz 1V AC Fan 12mm Hz 1V 5Hz 1V Hz115V/24V 5Hz115V/24V 6Hz1V/2V 5Hz1V/2V CFM 19S13 19S13UL CFM 19S6 19S6UL 19S1 19S1UL Hz 1V 5Hz 1V Hz 1V 5Hz 1V Hz 1V 5Hz 1V CFM 19S45UL 19S424UL 19S48UL 19S425UL Hz 1V 6 5Hz 1V CFM 19S429UL CFM 19S46UL 12mm CFM 19S475UL 19S474UL 19S478UL 19S472UL
25 AC Fan 16mm sq. San Ace16 51mm thick 51mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! black Sensor yellow mm Mass:1,1g / 1,1g() Specifications Standard Mounting Hole Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Range Life Expectancy /.35.72/ /.31.62/.61 5/6 37.5/33 2,85/3,35 7.2/ / / / /6-3 to +6 25, /.18.36/ /.16.32/.31 Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Range Life Expectancy /.35.72/ /.31.62/.61 5/6 37.5/33 2,85/3,35 7.2/ / / / /6-1 to +6 25, /.18.36/ /.16.32/.31 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. Dimensions(Unit : mm) Standard MAX M4.7 5,5mm deep Earth Ground tap Reference dimension of mounting holes and vent opening(unit : mm) Inlet side, Outlet side AIR FLOW ROTATION Mounting Hole Rotating Direction Air Flow Direction MAX M4.7 5,5mm deep Earth Ground tap AIR FLOW ROTATION Sensor-Purpose Lead Wire Length 3L 3L AWG28 UL17 AWG28 UL17 Rotating Direction Air Flow Direction
26 Wiring diagram Standard C FANA FANA (For fan power supply) C Sensor circuit 5V Brown Yellow 4.5V to 5.5V 1mA MAX. 27.6V MAX. Pull-up resistor Model 16 16mm ** :19-619E Surface treatment :Nickel-chrome plating (silver) Inlet side, Outlet side L 5 Flat 2 2-core vinyl cord ULSPT-1 AWG18 Black ORIEX 3A 25V L Flat 2 2-core vinyl cord ULSPT-1 AWG18 Black R ORIEX 3A 25V PS E JET L PS E JET ORIEX S272 3A 25V mm Sensor output Black V Sensor circuit Brown Yellow Black 9.6V to 14.4V 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. 12V Sensor output V AC Fan 16mm Options(Unit : mm) Finger guards Plug cord (UL/CSA CERTIFIED)) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L21 L-shaped Flat 2-core vinyl cord ULSPT-1 AWG18 Black (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model: L1/ L21 straight Model :19-62 Surface treatment :Nickel-chrome plating (silver) Outlet side (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L21/ L28 straight (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L21 L-shaped Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L28 2, L 5 1 Air Flow and Static Pressure Characteristics Standard mm Static Pressure Hz 1V 5Hz 1V Hz 1V 5Hz 1V CFM Air Flow CFM
27 AC Fan φ 172mm General Specifications San Ace mm thick(sidecut type) 51mm thick(round type) 51mm thick(round type /with sensor) Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute φ 172mm 51mm Mass:9g Specifications Sidecut type Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S /.25.65/.64 19S /.22.55/.54 5/6 27/25 2,9/3,5 5.3/ / /196.59/ /56-3 to +6 25, 19S /.13.33/.32 19S /.11.28/.27 Dimensions(Unit : mm) ROTATION AIR FLOW M4.7,5mm M4.7 5 deep Earth Ground tap Mounting Hole Reference dimension of mounting holes and vent opening(unit : mm) Inlet side, Outlet side R Rotating Direction Air Flow Direction Wiring diagram A C FAN
28 Options(Unit : mm) Finger guards Model :19-319E :19-319H Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Model :19-32 Surface treatment :Nickel-chrome plating (silver) Outlet side AC AC ファン Fan 172mm Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L PS E JET ORIEX S272 3A 25V L-shaped (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 : L1/ L21 L-shaped L 5 2 ULSPT-1 AWG L 5 1 Flat 2-core vinyl cord ULSPT-1 AWG18 Black Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics Hz 1V 5Hz 1V S31 19S CFM 19S34 19S33 172mm
29 AC Fan φ 172mm General Specifications San Ace mm thick(sidecut type) 51mm thick(round type) 51mm thick(round type /with sensor) Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! black Sensor yellow φ 172mm 51mm Mass:96g / 98g() Specifications Standard Round type Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy /.25.65/ /.22.55/.54 5/6 27/25 2,9/3,5 5.3/ / /196.59/ /51-3 to +6 25, /.13.33/ /.11.28/.27 Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy /.25.65/ /.22.55/.54 5/6 27/25 2,9/3,5 5.3/ / /196.59/ /51-1 to +6 25, /.13.33/ /.11.28/.27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. Dimensions(Unit : mm) Standard AIR FLOW ROTATION M4.7 5 M4.7,5mm deep Earth Ground tap ROTATION AIR FLOW M4.7,5mm M4.7 5 deep Earth Ground tap Mounting Hole Rotating Direction Air Flow Direction 3L Sensor-Purpose Leed 3L Length 3L AGW28 AWG28 UL Mounting Hole Rotating Direction Air Flow Direction
30 Reference dimension of mounting holes and vent opening (Unit : mm) Inlet 吸込側 side,, Outlet 吐出側 side R Wiring diagram Standard A C (For fan power supply) A C FAN FAN 5V Sensor circuit Brown 4.5V to 5.5V Yellow 1mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V 12V Sensor circuit Brown 9.6V to 14.4V Yellow 2mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 172mm Options(Unit : mm) Finger guards Model :19-319E :19-319H Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Model :19-32 Surface treatment :Nickel-chrome plating (silver) Outlet side Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model: L1/ L PS E JET ORIEX S272 3A 25V L-shaped (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 : L1/ L21 L-shaped L L 5 1 Flat 2-core vinyl cord ULSPT-1 AWG18 Black Model 型番 電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 172mm Air Flow and Static Pressure Characteristics Standard Hz 1V 5Hz 1V Hz 1V 5Hz 1V CFM CFM
Options Unit : mm Finger guards Color Model Surface treatment Nickel-chrome plating silver DC Fan 4mm Air Flo
DC Fan 4mm sq. San Ace 4 1mm thick, 15mm thick (GA type), 15mm thick, 2mm thick (GA type), 2mm thick 28mm thick (GA type), 28mm thick (GE type) 28mm thick (GV type), 28mm thick General Specifications Material
Air Flow - Static Pressure Characteristics PWM Duty Cycle % 1% 5% CRA312P4K
Counter Rotating Fan 38mm sq. San Ace 38 48mm thick (CRA type) General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to
untitled
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San
Airflow - Static Pressure Characteristics DC % 6% % Airflow 風量 PWM PWMDuty デューティ Cycle %
33mm thick (9BM type) 33mm thick (9BMB type) General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L:Survival
How to Read Specifications Fan Fan Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Airflow Max. Static Pres
Fan Wide lineup including low power consumption fans (9GA type), silent fans (9S type), and high airflow and high static pressure fans. Domain Diagram Airflow Frame Size.1.2.3.4.5.6.7.8.9 1. 2. 3. 4. 5.
Fan mm San Ace 36 9GX/9GV type (Model no.: 9GX3612P3K1 only) / General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impell
Fan Wide lineup including low power consumption fans (9GA type), silent fans (9S type), and high airflow and high static pressure fans. Fan Model Numbering System Not every combination of the following
xEffect_SG_MV_Part2_E_xEffect_SG_MV_E
Miniature Circuit Breakers FAZ-NA, FAZ-RT, FAZ-DU SG56912 FAZ-NA/-RT/-DU According to UL 489, CSA C22.2 No. 5 and also IEC 60947-2 standard For Applications, wich are permitted for UL 1077 or CSA C22.2
cms.pdf
RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Terminal pin lick spring Ground terminal Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated
音響部品アクセサリ本文(AC06)PDF (Page 16)
Guide for Electret Condenser Microphones A microphone as an audio-electric converting device, whose audio pickup section has a structure of a condenser consisting of a diaphragm and a back plate opposite
/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p
/ Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high
LMC6022 Low Power CMOS Dual Operational Amplifier (jp)
Low Power CMOS Dual Operational Amplifier Literature Number: JAJS754 CMOS CMOS (100k 5k ) 0.5mW CMOS CMOS LMC6024 100k 5k 120dB 2.5 V/ 40fA Low Power CMOS Dual Operational Amplifier 19910530 33020 23900
AC ファン mm 厚 San Ace 120 型番により取得規格が異なります p. 582 ~ 583をご参照ください 一般仕様 材質 フレーム : アルミニウム, 羽根 : 樹脂 ( 難燃グレード UL 94V-1) 期待寿命 仕様表参照 (L10: 残存率 90%,60 C, 定
AC ファン 12 38 mm 厚 San Ace 12 型番により取得規格が異なります p. 582 ~ 583をご参照ください 一般仕様 材質 フレーム : アルミニウム, 羽根 : 樹脂 ( 難燃グレード UL 94V-1) 期待寿命 仕様表参照 (L1: 残存率 9%,6 C, 定格電圧, 連続運転, フリーエアー状態 ) モータ構造 くま取りモータ モータ保護機能 拘束時焼損保護機能 詳細は
WIF6002-e
Installation and Operating Instructions Sartorius IF.. Standard and IF...CE Verifiable Models Flat-bed Scale 98648-012-37 2 ! 3 4 5 6 7 General View of the Equipment 2 4 1 3 5 6 1 Weighing platform 2 Handles
5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²
DIN Connector_p2-25.qxd
INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A
高周波同軸コネクタ
RF circuit ANT Probe Signal in Signal out Probe Signal out Signal in RF circuit ANT Probe Probe Signal in Signal out Signal out Signal in RF ANT. RF ANT. Probe Probe Signal out Signal out Signal in Signal
Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m
RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed
LMC6082 Precision CMOS Dual Operational Amplifier (jp)
Precision CMOS Dual Operational Amplifier Literature Number: JAJS760 CMOS & CMOS LMC6062 CMOS 19911126 33020 23900 11800 ds011297 Converted to nat2000 DTD Edited for 2001 Databook SGMLFIX:PR1.doc Fixed
LM35 高精度・摂氏直読温度センサIC
Precision Centigrade Temperature Sensors Literature Number: JAJSB56 IC A IC D IC IC ( ) IC ( K) 1/4 55 150 3/4 60 A 0.1 55 150 C 40 110 ( 10 ) TO-46 C CA D TO-92 C IC CA IC 19831026 24120 11800 ds005516
1.0 (040 ) CONNECTOR ハウジング本体に組込まれたスペーサをセットする により二重係止化を図り 端子抜けを防止します ターミナルが半挿入の場合 スペーサはセットされず半挿入を防止します ロック 部により ロック れを防止します 1. DOUBLE TERMINAL LOCKING
1.0 (040 ) CONNECTOR ハウジング本体に組込まれたスペーサをセットする により二重係止化を図り 端子抜けを防止します ターミナルが半挿入の場合 スペーサはセットされず半挿入を防止します ロック 部により ロック れを防止します 1. DOUBLE TERMINAL LOCKING SYSTEM ELIMINATES TERMINAL PUSH-OUT. (HOUSING LANCE,
080906_…o…−…^…b…vVSCW
Thyristor Type Single-Phase Power Regulator 2030 A 6A 150200A TOKYO RIKOSHA CO., LTD Latest VARITAP VSCW Series Achieved 1/2 the width (our company comparison). Free Power source of 100 to 240V specification.cover-type
FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.
-temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in
Distributeur : JBG-METAFIX
CL-7IR-X (.x.5x.mm) Lead-free RS-4 (.65x7.5x.75mm) Lead-free PR- (.5x.375x.6 mm) Lead-free P.7 P.4 P.35 CL-9IRS-X (x.8x.8mm) Lead-free RS-47 (3.x4.5x.mm) Lead-free CPT-3 (3.xx.mm) Lead-free P.8 P.6 P.37
MLA8取扱説明書
(5)-2 2 (5)-2 3 (5)-2 4 5 2 3 4 5 6 7 1 2 3 4 5 6 7 8 POWER ON / OFF 1 1 n 2 3 4 5 6 7 n 6 AC IN 8 MODEL MAL8 MADE IN INDONESIA 7 6 5 4 OUTPUT +4dBu ANALOG OUTPUT +4dBu G G 3 2 1 8 7 6 5 INPUT 4 3 2 1
TOCOS indd
巻線形可変抵抗器 WIRE WOUND POTENTIOMETERS φ25 Type RA25シリーズ 特徴 FEATURES JIS 準拠品です Meets JIS. 品名構成 PART NUMBER COMPOSITION 1 軸単連形の場合 Single-shaft, single-unit RA 25 Y 20 S B 102 1 2 3 5 6 7 8 RoHS 指令対応 RoHS compliant
型式表示
LS8MG series, Φ8 Coreless Motor, Metal Planetary, 5V 1 Specification/ 仕様一覧表 voltage 称呼 ( 推奨 ) Speed(min -1 ) Total 負荷 010 1.0 3 >5 1500 1150 負荷 全長 5.8mm 11mm 6g 5 050 48.0 6 9 >15 370 90 070 67.7 10 15
AD8212: 高電圧の電流シャント・モニタ
7 V typ 7 0 V MSOP : 40 V+ V SENSE DC/DC BIAS CIRCUIT CURRENT COMPENSATION I OUT COM BIAS ALPHA 094-00 V PNP 0 7 V typ PNP PNP REV. A REVISION 007 Analog Devices, Inc. All rights reserved. 0-9 -- 0 40
pc2sd11_j
PCSDNTZ PC3SDNTZ PCSDNTZ UL577file No. E64380 SD CSAfile No. CA9533SD UL94V - 0 Sheet No.: D-A0740FJP Date Mar. 3. 004 SHARP Corporation 3 6 5 4 3 4 5 6 Anode Cathode NC Anode/Cathode No external connection
58 W type W タイプコネクタとは 58 コネクタ S タイプ (M ターミナルタブ幅 2.8mm) の防水コネクタです W TYPE CONNECTOR: THE BLADE WIDTH OF THE MALE TERMINAL FOR THIS CONNECTOR IS IN
58 W type W タイプコネクタとは 58 コネクタ S タイプ (タブ幅 2.8mm) の防水コネクタです W TYPE CONNECTOR: THE BLADE WIDTH OF THE FOR THIS CONNECTOR IS 0.110 INCHES./ SEALED TYPE OF 58 S TYPE CONNECTOR. [ 特徴 ] DISTINCTIVE FEATURES 1
62 Z type Z タイプコネクタとは 58 コネクタ W タイプの小型化 軽量化を図ったコネクタです Z TYPE CONNECTOR: MINIATURIZATION AND WEIGHT REDUCTION OF THE EXISTING W-TYPE CONNECTOR OF THE 5
62 Z type Z タイプコネクタとは 58 コネクタ W タイプの小型化 軽量化を図ったコネクタです Z TYPE CONNECTOR: MINIATURIZATION AND WEIGHT REDUCTION OF THE EXISTING W-TYPE CONNECTOR OF THE 58 SERIES. [ 特徴 ] DISTINCTIVE FEATURES 1 ターミナルが半挿入の場合
FLA Brochure.indd
Ultra-Flat Brushless DC Actuators FLA Series Ultra-Flat Actuators Integrate a High-Performance Speed Reducer and a Brushless DC Motor The new ultra-flat, ultra-light brushless actuators combine our high-precision/high-performance
…X…C…b…`A001_212
RoHS compliant ITERAL STRUCTURE FEATURES RoHS compliant Meets EIAJ SP standard outline dimensions (B type) Low profile design of 2.5 mm 12 types of 1, 2, 4, 6, or 1 bit with either gull wing or J-hook
MDS_PowerSupplies_JP_
Medical Power Supplies From The World s o. Power Supply Company pril 207 www.deltapsu.com ...... 2-3... 4-3 MDS 040PS (2/5/8/)... 4 MDS 065PS (2/5/8/)... 5 MDS 00PS (2/5/8/)... 6 MDS 00BPS (2/5/8/)...
LMV851/LMV852/LMV854 8 MHz Low Power CMOS, EMI Hardened Operational Amplifi(jp)
LMV851,LMV852,LMV854 LMV851/LMV852/LMV854 8 MHz Low Power CMOS, EMI Hardened Operational Amplifiers Literature Number: JAJSAM3 LMV851/LMV852/LMV854 8MHz CMOS EMI LMV851/LMV852/LMV854 CMOS IC 40 125 LMV851/
FEEL Prod Grap PH_Artwork_P0AVS QSG JP A4_ _Rev.11.indd
EUROPORT MPA40BT-PRO/MPA40BT All-in-One Portable 40-Watt PA System with Bluetooth Connectivity, Battery Operation and Transport Handle 2 EUROPORT MPA40BT-PRO/MPA40BT 3 ¼" TS 1. 2. 3. 4. 5. 6. 7. 8. 9.
ADC121S Bit, ksps, Diff Input, Micro Pwr Sampling ADC (jp)
ADC121S625 ADC121S625 12-Bit, 50 ksps to 200 ksps, Differential Input, Micro Power Sampling A/D Converter Literature Number: JAJSAB8 ADC121S625 12 50kSPS 200kSPS A/D ADC121S625 50kSPS 200kSPS 12 A/D 500mV
OVERVIEW IRIE KOKEN's high vacuum angle valves are long-life vacuum valves with built-in formed or welded bellows. The valves off your choice of three
c 高真空アングルバルブシリーズ OVERVIEW IRIE KOKEN's high vacuum angle valves are long-life vacuum valves with built-in formed or welded bellows. The valves off your choice of three flanges for connection: the user-friendly
mbed祭りMar2016_プルアップ.key
1 2 4 5 Table 16. Static characteristics (LPC1100, LPC1100L series) continued T amb = 40 C to +85 C, unless otherwise specified. Symbol Parameter Conditions Min Typ [1] Max Unit Standard port pins, RESET
LM358
LM358 2 DC LM358 5V DC 15V DC micro SMD (8 micro SMD) LM358 LM2904 LM258 LM158 20000801 19870224 33020 23900 11800 2002 3 ds007787 Converted to nat2000 DTD added avo -23 to the first page Edited for 2001
Plastic Package (Note 12) Note 1: ( ) Top View Order Number T or TF See NS Package Number TA11B for Staggered Lead Non-Isolated Package or TF11B for S
Overture 68W ( ) 0.1 (THD N) 20Hz 20kHz 4 68W 8 38W SPiKe (Self Peak Instantaneous Temperature ( Ke)) SOA (Safe Operating Area) SPiKe 2.0 V ( ) 92dB (min) SN 0.03 THD N IMD (SMTPE) 0.004 V CC 28V 4 68W
水晶振動子/発振器
!! !! r !! !! !! !! 1.2±0.1 1.0±0.1 rr 0.60 0.30 max. (1) (4) 0.63 0.42 1.6±0.1 (2) (3) 0.35 (1) Crystal Terminal (2) GND (3) Crystal Terminal (4) No Connect Marking Monthly Code 1.2±0.1 0.68 0.35 max.
#表紙ドキュメントPDF書き出し用.indd
MAGNETIC ENCODER MH-10 MR-13 MR-16 磁気式エンコダ モタと一体化設計とすること で 超小型ながら３ 高分解能 ラインドライバ出力を 実現した磁気式エンコダです MR-13,MR-16 As designed in one unit with a motor, these magnetic encoders are very small, but are equipped
LM mA 低ドロップアウト・リニア・レギュレータ
800mA 800mA LM1117I 800mA LM1117 Chris Russell LM1117 800mA 1.2V LM1117 LM317 LM1117 2 1.25V 13.8V 1.8V 2.5V 2.85V 3.3V 5V 5 LM1117 1 LM1117 LLP TO-263 SOT-223 TO-220 TO-252 10 F 19970801 23900 DS100919
カタログ_XL_Mini-XL.indd
XLR シリーズ XLR Series コンタクト数 # of contacts 2 3 4 5 6 6 7 コンタクトアレンジメント ( ピンタイプの結合面から見た図 ) 2A 3 4 5 6 6A 7 Contact Arrangement Configuration (Engaging View Pin Insert) 定格電流 Rated Current 15A 15A 10A 7.5A 7.5A
Specification for Manual Pulse Generator, GFK-2262
Specification change in Manual Pulse Generator () A) Abstract This document explains about the specification change in Manual Pulse Generator (). The production of the former specifications written in
…X…C…b…`A001_212
SA- RoHS compliant INTERNAL STRUCTURE FEATURES RoHS compliant Low profile of. mm Wide variety (top or side setting, or positions, J-hook, gull wing or through hole pins) to choose from Easy to recognize
PA M01 LITEON SPEC Rev A
規格書 Electrical Specification Model No: PA-1360-5M01 Description: 12V 36W single output AC adapter Revision: A Issued Date: May 21, 2013 Customer Part No.: 90, Chien I Rd, Chung Ho city, Taipei Hsien 235,
LP3470 Tiny Power On Reset Circuit (jp)
Tiny Power On Reset Circuit Literature Number: JAJS547 IC ( C) CMOS IC 2.63V 2.93V 3.08V 3.65V 4.00V 4.38V 4.63V 6 (V RTH ) 2.4V 5.0V V CC (L ow ) ( ) V CC ( ) IC SOT23-5 1 : 2.63V 2.93V 3.08V 3.65V 4.00V
チョークコイル・リアクタ
THIN TRNSORMRS (MPT TYP) OMSTI(JPN) U S I TYP MPT MPT series are available for the thinner-sized sets and suit to I standard. H MPT I KS5535 KS6435 KS7235 KS7250 KS7270 KS9640 KS9660 KS9680 KS00 75.0 67.0
1 2 3
INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL
リードタイプ円板型セラミックコンデンサ（安全規格認定品）樹脂モールド面実装タイプセラミックコンデンサ（安全規格認定品）
!! !! D max. e F±1.0 T max. 25.0 min. 3.0 max. ød (in mm) Lead Code Coating Extension e ød A3 Up to the end of crimp 0.6±0.05 D max. T max. e F±0.8 Lead Code J3 3.5± 1.0 0.5 Coating Extension e ød Up
DS90LV011A 3V LVDS 1 回路入り高速差動出力ドライバ
3V LVDS Single High Speed Differential Driver Literature Number: JAJS962 Single High Speed Differential Driver 19961015 23685 ds200149 Input Voltage changed to 3.6V from 5V Updated DC and AC typs basic
WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi
ES-600P Operating Instructions WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing
pc3sd21_j
PCSDNTZ PCSDNTZ PCSDNTZ UL77file No. E680 SD CSAfile No. CA9SD VDE DIN EN6077- -file No. 000889SD UL9V - 0 ( ) PCSFYVZ ( ) Sheet No.: D-A0760FJP Date Mar.. 00 SHARP Corporation Anode 6 Cathode NC Anode/Cathode
pc725v0nszxf_j
PC725NSZXF PC725NSZXF PC725NSZXF PC725 DE file PC725 Date Jun. 3. 25 SHARP Corporation PC725NSZXF 2 6 5 2 3 4 Anode Cathode NC Emitter 3 4 5 Collector 6 Base PC725NSZXF PC725YSZXF.6 ±.2.2 ±.3 SHARP "S"
alternating current component and two transient components. Both transient components are direct currents at starting of the motor and are sinusoidal
Inrush Current of Induction Motor on Applying Electric Power by Takao Itoi Abstract The transient currents flow into the windings of the induction motors when electric sources are suddenly applied to the
fj111_109
15 1 111 Super Low-Loss / Super High-Density Multi-fiber Optical Connector * * * *2 Katsuki Suematsu Masao Shinoda Takashi Shigenaga Jun Yamakawa *2 *3 *3 Masayoshi Tsukamoto Yoshimi Ono Takayuki Ando
Unidirectional Measurement Current-Shunt Monitor with Dual Comparators (Rev. B
www.tij.co.jp INA206 INA207 INA208 INA206-INA208 INA206-INA208 V S 1 14 V IN+ V S 1 10 V IN+ OUT CMP1 IN /0.6V REF 2 3 1.2V REF 13 12 V IN 1.2V REF OUT OUT CMP1 IN+ 2 3 9 8 V IN CMP1 OUT CMP1 IN+ 4 11
Ｊ表紙.dpt
- 1-1 1.1 1.1.1 600V ( 6 4 ) PAB X POS 1.1.2 2000m 1 1.1.3 1.2 (Area operator access) 1.2.7.1 (Area service access) 1.2.7.2 (Body) 1.2.7.5 (Cable interconnecting) 1.2.11.6 ELV (Circuit ELV) 1.2.8.5 (Circuit
2014.3.10 @stu.hirosaki-u.ac.jp 1 1 1.1 2 3 ( 1) x ( ) 0 1 ( 2)NOT 0 NOT 1 1 NOT 0 ( 3)AND 1 AND 1 3 AND 0 ( 4)OR 0 OR 0 3 OR 1 0 1 x NOT x x AND x x OR x + 1 1 0 x x 1 x 0 x 0 x 1 1.2 n ( ) 1 ( ) n x
OPA134/2134/4134('98.03)
OPA OPA OPA OPA OPA OPA OPA OPA OPA TM µ Ω ± ± ± ± + OPA OPA OPA Offset Trim Offset Trim Out A V+ Out A Out D In +In V+ Output In A +In A A B Out B In B In A +In A A D In D +In D V NC V +In B V+ V +In
OPA277/2277/4277 (2000.1)
R OPA OPA OPA OPA OPA OPA OPA OPA OPA µ µ ± ± µ OPA ±± ±± ± µ Offset Trim Offset Trim In OPA +In -Pin DIP, SO- Output NC OPA Out A In A +In A A D Out D In D +In D Out A In A +In A A B Out B In B +In B
FAZ_NA_2008_e.qxd
www.moeller.net Xpole Xpole Industrial, the logical continuation of the development of installation products for industrial applications. From protective switches to modular installation devices to surge
LM4663 2 Watt Stereo Class D Audio Pwr Amp w/Stereo Headphone Amplifier (jp)
2 Watt Stereo Class D Audio Power Amplifier with Stereo Headphone Amplifier Literature Number: JAJS693 Boomer 2006 4 A very minor text edit (typo). (MC) Converted to nat2000 DTD. Few edits on Table 1 and
UL STYLE 1015LF, CSA TYPE TEW XLPE UL, CSA STANDARD ELECTRONIC WIRE LEAD FREE HEAT RESISTANT WIRE
UL STYLE 1007LF, CSA TYPE TR - 64 XLPE UL, CSA STANDARD ELECTRONIC WIRE LEAD FREE HEAT RESISTANT WIRE UL STYLE 1015LF, CSA TYPE TEW XLPE UL, CSA STANDARD ELECTRONIC WIRE LEAD FREE HEAT RESISTANT WIRE UL
スプリングプローブコネクタ、ライトアングルコネクタ
スフ リンク フ ローフ コネクタ 8Y254B eries pring Probe Connectors MT type pecifications Dielectric strength : C300Vrms 1minute Insulation resistance : 1000MΩmin Contact resistance : 50mΩmax * Durability : 100,000
untitled
1.0 1. Display Format 8*2 Character 2. Power Supply 3.3V 3. Overall Module Size 30.0mm(W) x 19.5mm(H) x max 5.5mm(D) 4. Viewing Aera(W*H) 27.0mm(W) x 10.5mm(H) 5. Dot Size (W*H) 0.45mm(W) x 0.50mm(H) 6.
pc123xnnsz_j
PC2XNNSZF PC2XNNSZF = UL577 2 fi le No. E68 PC2 BSI BS-EN665 fi le No. 787 BS-EN695 fi le No. 79 PC2 SEMKO EN665 EN695 PC2 DEMKO EN665 EN695 PC2 NEMKO EN665 EN695 PC2 FIMKO EN665 EN695 PC2 CSAfile No.CA952
Fig. 1. Relation between magnetron anode current and anode-cathod voltage. Fig. 2. Inverter circuit for driving a magnetron. 448 T. IEE Japan, Vol. 11
High Frequency Inverter for Microwave Oven Norikazu Tokunaga, Member, Yasuo Matsuda, Member, Kunio Isiyama, Non-member (Hitachi, Ltd.), Hisao Amano, Member (Hitachi Engineering, Co., Ltd.). Recently resonant
標準シンクロ
Catalogue No.T12-126N15 STANDARD S FUNCTION OF Torque Synchro Torque Transmitter TX,G Torque Receiver TR,M Torque Differential TransmitterTDX,DG Torque Differential Receiver TDR,DM TXG TRM TDXDG TDRDM
LM6172 デュアル高速低消費電力、低歪み電圧帰還アンプ
Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers Literature Number: JAJS854 100MHz 3000V/ s 50mA 2.3mA/ 15V ADSL 5V VIP III (Vertically Integrated PNP) LM6171 Dual High Speed, Low
アクアEXオイルホールロング(CC2015).indd
High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge
Connectors for Automobiles 62 SEALED SERIES Japanese English
Connectors for Automobiles 62 SEALED SERIES Japanese English 62 P-01 62 P-02 ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5 20.8 2.1 M(1400-0434) F(1400-0432) ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5
LC304_manual.ai
Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
LM2940
1A 3 1A 3 0.5V 1V 1A 3V 1A 5V 30mA (V IN V OUT 3V) 2 (60V) * C Converted to nat2000 DTD updated with tape and reel with the new package name. SN Mil-Aero: Order Info table - moved J-15 part from WG row
<836F F332E706466>
DC Power Jacks DCP0 B-0 Contents Contents & Specifications DC Power Jacks( RC-0A Standard) Product Lineup DC Power Jacks DC Power Jacks Product Lineup DC Power Jacks Specifications Insulation Resistance
16-Bit, Serial Input Multiplying Digital-to-Analog Converter (Rev. B
DAC8811 www.tij.co.jp ± ± µ ± µ ± V REF CS Power-On Reset DAC8811 D/A Converter 16 DAC Register 16 R FB I OUT CLK SDI Shift Register GND DAC8811C ±1 ±1 MSOP-8 (DGK) 4to 85 D11 DAC8811ICDGKT DAC8811C ±1
Nano Range Specification Stable & Stable Telescopic Resonators Model Nano S Nano S Nano S Nano S Nano L Nano L Nano L Nano L Nano L Nano L Nano L 130-
L i t r o n T o t a l L a s e r C a p a b i l i t y Nano Series Ultra Compact Pulsed Nd:YAG Lasers Product Range Specification Nano Range Specification Stable & Stable Telescopic Resonators Model Nano
MKS-05 "TERRA-Pプラス 日本語訳取扱説明書
MKS-05 "TERRA-P+" BICT.412129.021 KE Sparing-Vist Center Sparing-Vist Center ECOTEST (+38 032) 242-15-15 (+38 032) 242-20-15 sales@ecotest.ua 18 ( ) 2 1. 3 2. 3 3. 4 4. 4 5. 6 6. 7 7. 11 8. 11 9. 11 10.
LM837 Low Noise Quad Operational Amplifier (jp)
Low Noise Quad Operational Amplifier Literature Number: JAJSBB7 600 Low Noise Quad Operational Amplifier 2000 8 Converted to nat2000 DTD ds009047tl/h/9047 33020 19860602 10 V/ s ( ); 8 V/ s ( ) 25 MHz
LTC ホット･スワップ･コントローラ
LTC / GND CNECTOR CNECTOR R Q 0.00Ω MTB0N0V SENSE LTC GND C 0.µF R 0Ω FB C 0.µF.k % R.k % µp C 00µF V BACKPLANE PLUG-IN CARD TA0 LTC GND N PACKAGE -LEAD PDIP TOP VIEW SENSE FB S PACKAGE -LEAD PLASTIC SO
untitled
1 2 3 4 5 130mm 32mm UV-irradiation UV-cationic cure UV-cationic cure UV-cationic cure Thermal cationic Reaction heat cure Thermal cationic Cation Reaction heat cure Cation (a) UV-curing of
s102t02_j
S0T0 S0T0 ITrmsA SIP 4pin IRED SSR iso rms3.0k I T rms.0a SIP DRM 600 DRM 400 iso rms3.0k UL508file No. E94758S0T0/ S0T0 CSA. No.4file No. LR63705 S0T0/S0T0 UL94-0 Sheet No.: D4-A050FJP-A Date Apr. 8.
LT 低コスト、シャットダウン機能付き デュアルおよびトリプル300MHz 電流帰還アンプ
µ µ LT1398/LT1399 V IN A R G 00Ω CHANNEL A SELECT EN A R F 3Ω B C 97.6Ω CABLE V IN B R G 00Ω EN B R F 3Ω 97.6Ω V OUT OUTPUT (00mV/DIV) EN C V IN C 97.6Ω R G 00Ω R F 3Ω 1399 TA01 R F = R G = 30Ω f = 30MHz
untitled
dynamics operator manual Klark Teknik Klark Teknik Building Walter Nash Road Kidderminster Worcestershire DY11 7HJ England Tel: +44 1562 741515 Fax: +44 1562 745371 Email: klarkteknik.info@uk.telex.com
QCL_Accse_J.pdf
CW QCL HHL QCL TO-8 TEC * 1 (DC) * 3 TEC -8 A +8 A -1.9 A +1.9 A 24 V 24 V 8 A * 2 2.6 A * 2 NTC, 2 RTD 3 (Pt100) * 5 (W H D) -50 C +125 C / -50 C +150 C 0.01 C PID * 4 RS-232C, RS-424 0 C +40 C * 6-5
FreeSpace.book
IZA 190-HZ IZA 250-LZ ZA 190-HZ ZA 250-LZ FreeSpace Integrated Zone Amplifier/Zone Amplifier * 1. 2. 3. 4. 5. 6. 7. 8. 9. 2 2 10. 11. 12. 13. 14. 15. 16. 17. 40 C This product conforms to all EU Directive
0810_UIT250_soto
UIT UNIMETER SERIES 250 201 Accumulated UV Meter Digital UV Intensity Meter Research & Development CD Medical Biotech Sterilization Exposure Bonding Manufacturing Curing Production Electronic Components
LM3886
Overture 68W ( ) 0.1 (THD N) 20Hz 20kHz 4 68W 8 38W SPiKe TM (Self Peak Instantaneous Temperature ( Ke)) SOA (Safe Operating Area) SPiKe 2.0 V ( ) 92dB (min) SN 0.03 THD N IMD (SMTPE) 0.004 V CC 28V 4
MAX4886 DS.J
19-0807; Rev 0; 4/07 EVALUATION KIT AVAILABLE μ PART TEMP RANGE PIN- PACKAGE PKG CODE ETO+ -40 C to +85 C 42 TQFN-EP* T42359OM-1 * EYE DIAGRAM ( = 3.3V, f = 2.6GHz 600mV P-P PRBS SIGNAL+) * PRBS = PSUEDORANDOM
AN15880A
DATA SHEET 品種名 パッケージコード QFH064-P-1414H 発行年月 : 2008 年 12 月 1 目次 概要.. 3 特長.. 3 用途.. 3 外形.. 3 構造...... 3 応用回路例.. 4 ブロック図.... 5 端子.. 6 絶対最大定格.. 8 動作電源電圧範囲.. 8 電気的特性. 9 電気的特性 ( 設計参考値 )... 10 技術資料.. 11 入出力部の回路図および端子機能の
Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM
磁気測定によるオーステンパ ダクタイル鋳鉄の残留オーステナイト定量
33 Non-destructive Measurement of Retained Austenite Content in Austempered Ductile Iron Yoshio Kato, Sen-ichi Yamada, Takayuki Kato, Takeshi Uno Austempered Ductile Iron (ADI) 100kg/mm 2 10 ADI 10 X ADI
Tab 5, 11 Tab 4, 10, Tab 3, 9, 15Tab 2, 8, 14 Tab 1, 7, 13 2
COMPANION 20 MULTIMEDIA SPEAKER SYSTEM Owner s Guide Tab 5, 11 Tab 4, 10, Tab 3, 9, 15Tab 2, 8, 14 Tab 1, 7, 13 2 Tab1, 7, 13 Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, Tab 5, 11 This product conforms to all
03-01 Senyouki.pdf
Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder
PowerPoint プレゼンテーション
一般機器用 For Consumer Products 汎用パワーインダクタ Common Power Inductors HER series RoHS HER327 HER427 HER527 HER627 HER88 HER9 特徴 直流重畳特性に優れている為 DC-DC コンバータ用インダクタとして最適 ドラムコアとリングコアに異なる磁性材料を使い電流特性を向上 * 既存同サイズと比べて電流特性を約
圧電型加速度センサ Piezoelectric Acceleration sensor 特長 Features 圧電素子に圧電型セラミックを用いた加速度センサは 小型堅牢 高感度で広帯域を特長としております 従って 低い周波数の振動加速度から衝突の様な高い加速度の測定まで 各分野で 幅広く使用されて
圧電型加速度センサ 小型タイプ φ3.5 5.85 2.5(H)mm 加速度 MAX100,000m/s 2 高温タイプ MAX250 小型 3 軸タイプ 8 7 5.5(H)mm Super miniature type φ3.5 5.85 2.5(H)mm 100,000m/s 2 High temperature resistance type MAX250 and Triaxial type
目次 / Contents 1. 概要 / Overview 3 2. NS,NA規格溶接べローズ 4 NS, NA Standard Welded Bellows 3. ご使用にあたって When using 3-1 型式の選択方法 Model selection 3-2 ご使用時の注意点 Pre
No.220 WELDED BELLOWS 溶接ベローズ WB COMPACT WB 目次 / Contents 1. 概要 / Overview 3 2. NS,NA規格溶接べローズ 4 NS, NA Standard Welded Bellows 3. ご使用にあたって When using 3-1 型式の選択方法 Model selection 3-2 ご使用時の注意点 Precautions