IPC-BX950 CentOS5.4 インストール確認書 CentOS 5.4-i386-bin-DVD.iso
目次 1 調査環境... - 3-1.1 ハードウェア... - 3-1.2 ソフトウェア... - 3-2 調査項目の手順と結果...- 4-2.1 Console 日本語入力...- 4-2.2 シリアルポート... - 5-2.2.1 ポーリング処理の接続方法...- 6-2.2.2 IRQ4,3 を使用して送受信する方法...- 6-2.3 LINE 出力... - 7-2.4 CF... - 8-2.5 PowerManagement...- 10-2.5.1 S1, S3, S4 ステート...- 10-2.5.2 S5 ステート...- 10-3 付録... - 11-3.1 メモリの確認... - 11-3.2 runlevel 対応サービス... - 11-3.3 CPU 情報... - 12-3.4 メモリ情報... - 13-3.5 カーネルモジュールメッセージ...- 14-3.6 PCI Device 情報...- 19-3.7 システムロードモジュール...- 19-3.8 バージョン情報...- 20-3.9 IRQ 利用情報... - 20-3.10 I/Oポート利用情報...- 21 - - 2 -
1 調査環境 1 調査環境 1.1 ハードウェア IPC-BX950 ハードウェアの詳細なスペックについては ユーザーズマニュアルを参照してください COM 2 イヤフォン COM 1 LAN 1 IPC-BX950(Linux) インターネット接続 図 1 ハードウェアの接続形態 マウス モニタ等は省略しています 1.2 ソフトウェア 本調査で使用したディストリビューションについては以下の通りです CentOS5.4 バージョン情報 [root@c54d4g ~]# cat /proc/version Linux version 2.6.18-164.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009 [root@c54d4g ~]# - 3 -
2 調査項目の手順と結果 2 調査項目の手順と結果 本調査では以下の内容を調査致しました また インストール後に行った調査に関しましては root 権限にて実行しています 表 1 調査結果 調査項目 確認内容 結果 備考 OS USB 接続メディアよりインストール出来る事正常に通常インストールが可能 メモリ free の内容確認 付録参照 キーボード インストール時及び OS 入力後共正常キーボード マウスが正常に動作する事マウス インストール時及び OS 入力後共正常 USB インストール DVD からインストール作業が正常 CD/DVD に行える事 インストール時正常認識 OS インストール後 auto mount 確認 日本語入力 日本語入力を行い表示できる事 画面出力 ディスプレイを接続し正しく表示される事 シリアルポート シリアルポートより通信が出来ること IRQ3,4 通信できない ただし ポーリング処理での接続と起動オプションに noapic を加えて接続すると通信可能 ライン出力 イヤフォンを接続し音の出力が確認出来る事 イヤフォンにて音声確認 マイク入力 - - LAN DHCP でネットワーク情報が取得出来る事 DHCP サーバより IP address 取得確認 Yum にてパッケージインストールが可能 CF FAT32 でフォーマットした CF を CF2 に挿入し 読み書きすることができるか スタンバイ (S1 ステート ) 動作 正常動作 Power サスペンド (S3 ステート ) 動作 IPC-BX950 の BIOS がサポートしていないため Management ハイバネーション (S4 ステート ) 動作 IPC-BX950 の BIOS がサポートしていないため システム終了時の電源 OFF(S5 ステート ) 動作 正常動作 2.1 Console 日本語入力 GNOME 画面上で Ctrl + space または 半角 / 全角キー を押下します 画面右下に日本語のコントロールが表示され 日本語が入力できることを確認します - 4 -
2 調査項目の手順と結果 2.2 シリアルポート 文字列の送受信テスト IPC-BX950 の COM1 と COM2 にクロスケーブルを用いて接続します ターミナルウインドウを 2 つ起動してください 片側のターミナルウインドウで 以下のコマンドを入力してください このコマンドを入力した方が受信側となります [root@localhost ]# cat /dev/ttys0 [root@localhost ]# もう片方が送信側です 以下のコマンドを入力して文字列 (aiueo) を送信してください [root@localhost ]# echo aiueo > /dev/ttys1 [root@localhost ]# 受信側のターミナルウインドウに送信側のターミナルウインドウから送信したテキストが表示されれば 正常に通信が出来ています 以下の画面が表示されます インストール直後の状態では IRQ4,3 を利用して通信することができませんが 以下の方法で 通信することが可能です - 5 -
2 調査項目の手順と結果 2.2.1 ポーリング処理の接続方法 IPC-BX950 ttys0 の IRQ を 0 に設定し 更新されているか確認を行います [root@localhost ]# setserial /dev/ttys0 irq 0 [root@localhost ]# setserial -Gg /dev/ttys0 /dev/ttys0 uart 16550A port 0x03f8 irq 0 baud_base 115200 spd_normal skip_test [root@localhost ]# 2.2 シリアルポートを元に文字列の送受信を行います 2.2.2 IRQ4,3 を使用して送受信する方法 kernel の起動オプションに noapic を追加します /boot/grub/grub.conf のファイルを以下のように編集 再起動を行い 2.2 シリアルポートを元に接続の確認をします - 6 -
2 調査項目の手順と結果 2.3 LINE 出力 デスクトップのタスクバーより システム 設定 サウンドを開く 以下の画面が表示され テストボタンを押すとイヤフォンに音が出力されるのを確認します - 7 -
2 調査項目の手順と結果 2.4 CF システム 管理 ハードウェア を選択し デバイスマネージャを表示します Devices に CF が表示されている事を確認します フォルダを作成し マウントを行います [root@localhost ]# mkdir /mnt/data [root@localhost ]# mount -t vfat /dev/hdb1 /mnt/data マウントの確認を行います [root@localhost ]# mount < 省略 > /dev/hdb1 on /mnt/data type vfat (rw) [root@localhost ]# - 8 -
2 調査項目の手順と結果 テキストファイルの読み書きを行います [root@localhost ]# echo hello > /mnt/data/hello.txt [root@localhost ]# cat /mnt/data/hello.txt hello [root@localhost ]# アンマウントを行い ファイルが読めなくなる事を確認します [root@localhost ]# umount /mnt/data/ [root@localhost ]# ls /mnt/data [root@localhost ]# - 9 -
2 調査項目の手順と結果 2.5 PowerManagement 2.5.1 S1, S3, S4 ステートパワーマネジメントステータスを確認し サスペンド処理が使用可の状態か確認を行います 1 [root@localhost ]# cat /sys/power/state standby disk [root@localhost ]# このシステムは スタンバイ (standby) とハイバネーション (disk) をサポートしていると表示されますが IPC-BX950 の BIOS はハイバネーションをサポートしていないため ご利用になれません 表 2 /sys/power/state 出力文字 意味 ACPI 状態 関連コマンド standby スタンバイ S1 mem サスペンド S3 pm-suspend disk ハイバネーション S4 pm-hibernate スタンバイ機能 (ACPI S1 ステート ) は 以下で動作を確認することができます [root@localhost ]# echo -n standby > /sys/power/state スタンバイ状態に遷移したら 電源スイッチを ON してください Linux の復帰を確認できます 2.5.2 S5 ステートシャットダウンコマンドを実行してください シャットダウン終了後 本体の電源が OFF になることを確認できます [root@localhost ]# shutdown -h now 1 http://www.linux.or.jp/jf/jfdocs/kernel-docs-2.6/power/states.txt.html http://netlog.jpn.org/r271-635/2008/06/centos_52.html - 10 -
3 付録 3.1 メモリの確認 [root@c54d4g ~]# free total used free shared buffers cached Mem: 1025880 788828 237052 0 28592 511420 -/+ buffers/cache: 248816 777064 Swap: 524280 0 524280 [root@c54d4g ~]# 3.2 runlevel 対応サービス [root@c54d4g ~]# chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off autofs 0:off 1:off 2:off 3:on 4:on 5:on 6:off avahi-daemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off avahi-dnsconfd 0:off 1:off 2:off 3:off 4:off 5:off 6:off bluetooth 0:off 1:off 2:on 3:on 4:on 5:on 6:off capi 0:off 1:off 2:off 3:off 4:off 5:off 6:off conman 0:off 1:off 2:off 3:off 4:off 5:off 6:off cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off dnsmasq 0:off 1:off 2:off 3:off 4:off 5:off 6:off dund 0:off 1:off 2:off 3:off 4:off 5:off 6:off firstboot 0:off 1:off 2:off 3:on 4:off 5:on 6:off gpm 0:off 1:off 2:on 3:on 4:on 5:on 6:off haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off hidd 0:off 1:off 2:on 3:on 4:on 5:on 6:off hplip 0:off 1:off 2:on 3:on 4:on 5:on 6:off httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ibmasm 0:off 1:off 2:off 3:off 4:off 5:off 6:off ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off irda 0:off 1:off 2:off 3:off 4:off 5:off 6:off irqbalance 0:off 1:off 2:on 3:on 4:on 5:on 6:off isdn 0:off 1:off 2:on 3:on 4:on 5:on 6:off kudzu 0:off 1:off 2:off 3:on 4:on 5:on 6:off lvm2-monitor 0:off 1:on 2:on 3:on 4:on 5:on 6:off mcstrans 0:off 1:off 2:on 3:on 4:on 5:on 6:off mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off mdmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off multipathd 0:off 1:off 2:off 3:off 4:off 5:off 6:off netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off netplugd 0:off 1:off 2:off 3:off 4:off 5:off 6:off network 0:off 1:off 2:on 3:on 4:on 5:on 6:off nfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off nscd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off oddjobd 0:off 1:off 2:off 3:off 4:off 5:off 6:off pand 0:off 1:off 2:off 3:off 4:off 5:off 6:off pcscd 0:off 1:off 2:on 3:on 4:on 5:on 6:off portmap 0:off 1:off 2:off 3:on 4:on 5:on 6:off psacct 0:off 1:off 2:off 3:off 4:off 5:off 6:off rawdevices 0:off 1:off 2:off 3:on 4:on 5:on 6:off rdisc 0:off 1:off 2:off 3:off 4:off 5:off 6:off readahead_early 0:off 1:off 2:on 3:on 4:on 5:on 6:off readahead_later 0:off 1:off 2:off 3:off 4:off 5:on 6:off restorecond 0:off 1:off 2:on 3:on 4:on 5:on 6:off rpcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcidmapd 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcsvcgssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off sendmail 0:off 1:off 2:on 3:on 4:on 5:on 6:off smartd 0:off 1:off 2:on 3:on 4:on 5:on 6:off sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off - 11 -
syslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off tcsd 0:off 1:off 2:off 3:off 4:off 5:off 6:off vncserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off wdaemon 0:off 1:off 2:off 3:off 4:off 5:off 6:off winbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off xfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off yum-updatesd 0:off 1:off 2:on 3:on 4:on 5:on 6:off [root@c54d4g ~]# 3.3 CPU 情報 [root@c54d4g ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz stepping : 12 cpu MHz : 800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr bogomips : 2394.19 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz stepping : 12 cpu MHz : 800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr bogomips : 2393.70 [root@c54d4g ~]# - 12 -
3.4 メモリ情報 [root@c54d4g ~]# cat /proc/meminfo MemTotal: 1025880 kb MemFree: 237052 kb Buffers: 28608 kb Cached: 511420 kb SwapCached: 0 kb Active: 218968 kb Inactive: 405976 kb HighTotal: 121728 kb HighFree: 244 kb LowTotal: 904152 kb LowFree: 236808 kb SwapTotal: 524280 kb SwapFree: 524280 kb Dirty: 32 kb Writeback: 0 kb AnonPages: 84976 kb Mapped: 35568 kb Slab: 21704 kb PageTables: 3768 kb NFS_Unstable: 0 kb Bounce: 0 kb CommitLimit: 1037220 kb Committed_AS: 364484 kb VmallocTotal: 114680 kb VmallocUsed: 5388 kb VmallocChunk: 109044 kb HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 4096 kb [root@c54d4g ~]# - 13 -
3.5 カーネルモジュールメッセージ [root@c54d4g ~]# dmesg Linux version 2.6.18-164.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000010000-000000000009f400 (usable) BIOS-e820: 000000000009f400-00000000000a0000 (reserved) BIOS-e820: 00000000000f0000-0000000000100000 (reserved) BIOS-e820: 0000000000100000-000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000-000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000-000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000-000000003f700000 (reserved) BIOS-e820: 00000000e0000000-00000000f0000000 (reserved) BIOS-e820: 00000000fec00000-0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4d50 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Using x86 segment limits to approximate NX protection On node 0 totalpages: 259808 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 30432 pages, LIFO batch:7 DMI 2.2 present. Using APIC driver default ACPI: RSDP (v000 IntelR ) @ 0x000f8f50 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e3080 ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7ac0 ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7a40 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050930) @ 0x3f6e8160 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) Detected 1197.098 MHz processor. Built 1 zonelists. Total pages: 259808 Kernel command line: ro root=/dev/volgroup01/logvol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0761000 soft=c0741000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1022140k/1039232k available (2154k kernel code, 16292k reserved, 899k data, 232k init, 121728k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.19 BogoMIPS (lpj=1197098) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000 Intel machine check architecture supported. - 14 -
Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 11000 CPU 1 irqstacks, hard=c0762000 soft=c0742000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2393.70 BogoMIPS (lpj=1196854) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz stepping 0c Total of 2 processors activated (4787.90 BogoMIPS). ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=176 bytes migration_cost=55 checking if image is initramfs... it is Freeing initrd memory: 3156k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [ _SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:09: ioport range 0x400-0x4bf could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: e000-0000 MEM window: fdc00000-00000000 PREFETCH window 0x00000000fd900000-0x00000000fd9fffff PCI: Bridge: 0000:00:1c.1 IO window: d000-0000 MEM window: fd800000-00000000 PREFETCH window 0x00000000fdd00000-0x00000000fddfffff PCI: Bridge: 0000:00:1e.0 IO window: c000-0000 MEM window: fdb00000-00000000 PREFETCH window 0x00000000fda00000-0x00000000fdafffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64-15 -
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1268988109.971:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 581431131FF6A527 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI: Processor [CPU0] (supports 2 throttling states) ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI: Processor [CPU1] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (36 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GME Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttys0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttys1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttys0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttys1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 209 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:dma, hdb:pio Probing IDE interface ide0... hda: TRANSCEND, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 7962192 sectors (4076 MB) w/1kib Cache, CHS=7899/16/63, UDMA(66) hda: hda1 hda2 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:usb HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered - 16 -
Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) Initalizing network drop monitor service Freeing unused kernel memory: 232k freed Write protecting the kernel read-only data: 404k Time: tsc clocksource has been installed. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 217, io mem 0xfdfff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000fe00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000fd00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000fc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fb00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected SCSI subsystem initialized usb 1-3: new high speed USB device using ehci_hcd and address 4 libata version 3.00 loaded. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com usb 1-3: configuration #1 chosen from 1 choice device-mapper: dm-raid45: initialized v0.2594l usb 1-4: new high speed USB device using ehci_hcd and address 5 usb 1-4: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /class/input/input0 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1 usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: USB Keyboard as /class/input/input1 input: USB HID v1.00 Keyboard [USB Keyboard ] on usb-0000:00:1d.0-2 input: USB Keyboard as /class/input/input2 input: USB HID v1.00 Device [USB Keyboard ] on usb-0000:00:1d.0-2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1268988133.177:2): selinux=0 auid=4294967295 ses=4294967295 intel_rng: FWH not detected e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:01:00.0 to 64 input: PC Speaker as /class/input/input3 e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM Initializing USB Mass Storage driver... - 17 -
scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. eth0: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a7:c0:5f eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM eth1: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a7:c0:5e eth1: Intel(R) PRO/1000 Network Connection eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1e.2 to 64 intel8x0_measure_ac97_clock: measured 51177 usecs intel8x0: clocking to 48000 floppy0: no floppy controllers found lp: driver loaded but no devices found Vendor: Optiarc Model: DVD RW AD-7560A Rev: DX09 Type: CD-ROM ANSI SCSI revision: 00 usb-storage: device scan complete Vendor: StoreJet Model: Transcend Rev: Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 34 00 00 00 sda: assuming drive cache: write through SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 34 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi disk sda usb-storage: device scan complete scsi 1:0:0:0: Attached scsi generic sg0 type 5 sd 0:0:0:0: Attached scsi generic sg1 type 0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] md: Autodetecting RAID arrays. md: autorun... md:... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/volgroup01/logvol01. Priority:-1 extents:1 across:524280k IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present Bluetooth: HIDP (Human Interface Emulation) ver 1.1 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [drm] Initialized i915 1.8.0 20060929 on minor 0 [root@c54d4g ~]# - 18 -
3.6 PCI Device 情報 [root@c54d4g ~]# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller [root@c54d4g ~]# 3.7 システムロードモジュール [root@c54d4g ~]# lsmod Module Size Used by i915 24001 2 drm 65365 3 i915 autofs4 29253 3 hidp 23105 2 rfcomm 42457 0 l2cap 29505 10 hidp,rfcomm bluetooth 53925 5 hidp,rfcomm,l2cap lockd 63081 0 sunrpc 145405 2 lockd cpufreq_ondemand 12493 2 acpi_cpufreq 13897 0 dm_multipath 24909 0 scsi_dh 11713 1 dm_multipath video 21193 0 hwmon 7365 0 backlight 10049 1 video sbs 18533 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 sr_mod 19941 0 cdrom 36577 1 sr_mod ipv6 267361 18 xfrm_nalgo 13381 1 ipv6 sg 36573 0 crypto_api 12609 1 xfrm_nalgo parport_pc 29157 0 lp 15849 0 parport 37513 2 parport_pc,lp joydev 13313 0 snd_intel8x0 35421 1 snd_ac97_codec 93025 1 snd_intel8x0 ac97_bus 6337 1 snd_ac97_codec snd_seq_dummy 7877 0 snd_seq_oss 32577 0 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49585 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42817 0 serio_raw 10693 0 snd_mixer_oss 19009 1 snd_pcm_oss i2c_i801 11725 0 snd_pcm 72133 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss i2c_core 23745 2 i2c_ec,i2c_i801 usb_storage 77857 0 pcspkr 7105 0 snd_timer 24517 2 snd_seq,snd_pcm snd 55749 11 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer e1000e 112793 0 soundcore 11553 1 snd - 19 -
snd_page_alloc 14281 2 snd_intel8x0,snd_pcm dm_raid45 67145 0 dm_message 6977 1 dm_raid45 dm_region_hash 15681 1 dm_raid45 dm_mem_cache 9537 1 dm_raid45 dm_snapshot 22885 0 dm_zero 6209 0 dm_mirror 24265 0 dm_log 14657 3 dm_raid45,dm_region_hash,dm_mirror dm_mod 63225 11 dm_multipath,dm_raid45,dm_snapshot,dm_zero,dm_mirror,dm_log ata_piix 23621 0 libata 157317 1 ata_piix sd_mod 25281 0 scsi_mod 141717 6 scsi_dh,sr_mod,sg,usb_storage,libata,sd_mod ext3 125001 2 jbd 57065 1 ext3 uhci_hcd 25421 0 ohci_hcd 24553 0 ehci_hcd 33869 0 [root@c54d4g ~]# 3.8 バージョン情報 [root@c54d4g ~]# cat /proc/version Linux version 2.6.18-164.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009 [root@c54d4g ~]# 3.9 IRQ 利用情報 [root@c54d4g ~]# cat /proc/interrupts CPU0 CPU1 0: 3124990 0 IO-APIC-edge timer 1: 3 0 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-level acpi 12: 5 0 IO-APIC-edge i8042 14: 6952 14531 IO-APIC-edge ide0 82: 65 20209 PCI-MSI eth0 169: 0 0 IO-APIC-level uhci_hcd:usb5, i915@pci:0000:00:02.0 177: 0 0 IO-APIC-level Intel ICH7 209: 0 0 IO-APIC-level uhci_hcd:usb4 217: 978 114323 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 225: 0 0 IO-APIC-level uhci_hcd:usb3 NMI: 0 0 LOC: 3124320 3124320 ERR: 0 MIS: 0 [root@c54d4g ~]# - 20 -
3.10 I/O ポート利用情報 [root@c54d4g ~]# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : serial 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0400-047f : 0000:00:1f.0 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0410-0415 : ACPI CPU throttle 0428-042f : ACPI GPE0_BLK 0480-04bf : 0000:00:1f.0 0500-051f : 0000:00:1f.3 0500-051f : i801_smbus c000-cfff : PCI Bus #03 d000-dfff : PCI Bus #02 df00-df1f : 0000:02:00.0 e000-efff : PCI Bus #01 ef00-ef1f : 0000:01:00.0 f200-f2ff : 0000:00:1e.2 f200-f2ff : Intel ICH7 f800-f80f : 0000:00:1f.1 f800-f807 : ide0 fa00-fa3f : 0000:00:1e.2 fa00-fa3f : Intel ICH7 fb00-fb1f : 0000:00:1d.3 fb00-fb1f : uhci_hcd fc00-fc1f : 0000:00:1d.2 fc00-fc1f : uhci_hcd fd00-fd1f : 0000:00:1d.1 fd00-fd1f : uhci_hcd fe00-fe1f : 0000:00:1d.0 fe00-fe1f : uhci_hcd ff00-ff07 : 0000:00:02.0 [root@c54d4g ~]# - 21 -
発行株式会社コンテック 大阪市西淀川区姫里 3-9-31 555-0025 日本語 http://www.contec.co.jp/ 英語 http://www.contec.com/ NA00956(LYLX361) 中国語 http://www.contec.com.cn/ [09222010] 本製品および本書は著作権法によって保護されていますので無断で複写 複製 転載 改変することは禁じられています