Neo-Flex Mobile Media Center, LD with 90 Portrait/Landscape rotation Holds displays with the following VESA mounting hole pattern: 100 x 100 mm 200 x 200 mm 200 x 300 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 500 x 200 mm 500 x 300 mm 600 x 200 mm 600 x 300 mm 200 x 400 mm 300 x 400 mm 400 x 400 mm 500 x 400 mm 600 x 400 mm 25-50 lbs (11.3-22.7 kg) Holds displays with the following VESA mounting hole pattern: 75 x 75 mm 100 x 100 mm 200 x 100 mm 200 x 200 mm 25-36 lbs (11.3-16 kg) 13mm 15mm 14mm User's Guide - English Guía del usuario - Español Manuel de l utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l utente - Italiano Användarhandbok - svenska 1 of 21
Holds displays with the following VESA mounting hole pattern: 100 x 100 mm 200 x 200 mm 200 x 300 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 500 x 200 mm 500 x 300 mm 600 x 200 mm 600 x 300 mm 200 x 400 mm 300 x 400 mm 400 x 400 mm 500 x 400 mm 600 x 400 mm 25-50 lbs (11.3-22.7 kg) 20" (510 mm) -15 +5 Holds displays with the following VESA mounting hole pattern: 75 x 75 mm 100 x 100 mm 200 x 100 mm 200 x 200 mm 20" (510 mm) -25 +5 25-36 lbs (11.3-16 kg) <30 lbs (15 kg) <5 lbs (2.2 kg) 2 of 21
WARNING STORED ENERGY HAZARD! DO NOT OPEN TOWER OR REMOVE SAFETY GUARD! Stored Energy Hazard: The lift mechanism in the tower is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment or make adjustments to lift tension unless the front assembly has been moved to the highest position on the tower! Failure to follow this instruction may result in serious personal injury and/or equipment damage! WARNING DO NOT load the Cart/Stand past maximum weight capacity. DO NOT mount a display larger than the recommended size. Failure to comply with warning may result in Cart/Stand instability leading to equipment damage or personal injury. kg UHD: 90-120 lbs (41-54 kg) CAUTION TIPPING HAZARD! DO NOT move Cart with Display in highest position. DO NOT push Cart from front or back of Tower. DO NOT move Cart over cords or uneven, dirty, soft or sloping surfaces. DO NOT move Cart by pushing on Display. Failure to comply with this caution may result in Cart instability leading to equipment damage or personal injury. TO MOVE CART 1. Push Display down to lowest position on Cart. 2. Disconnect power cord and attach to Tower. 3. Unlock casters; point casters in direction of travel. 4. Push Cart from side with hands on Tower. 30lbs (15kg) kg kg +30lbs (15kg) WARNING TIPPING HAZARD! DO NOT allow children on Cart / Stand. DO NOT route electric cords or equipment cables within reach of children. LOCK CASTERS when Cart is stationary. Failure to comply with this warning may result in Cart / Stand instability leading to equipment damage 3 of 21
A B Leg Mounting Hardware 1 M10 x 60mm 2 Leg Cover Mounting Screws M3.5 x 6mm 8x 3 Shelf Mounting Hardware 8x TM Mounting Hardware M6x8mm M3 x 39mm 4 5 5.1(ID) x 10(OD) x 6mm 5.1(ID) x 10(OD) x 12mm 400mm Extension Hardware M4 x 16mm Large Display Cart Hardware M5 x 16mm M8 x 14mm 8.1(ID) x 16(OD) x 6mm 8.1(ID) x 16(OD) x 12mm M6x20mm 6 5.1(ID) x 10(OD) x 18mm M20mm M40mm M6x45mm 7 8 9 10 8.1(ID) x 16(OD) x 24mm M5x20mm 8x 5.3(ID) x 16(OD) x 1.0mm 6.3(ID) x 14(OD) x 1.0mm M5x40mm 100x100mm VESA Plate Hardware M5 x 10mm Power Strip Hardware Cable Management Support Hardware Top Cap Hardware M5x8mm M5x8mm M5x9mm 25-36 lbs (11.3-16 kg) M5 x 8mm M6 x 8mm M8x25mm M8x50mm M4 x 12mm M5 x 7mm M5 x 12mm M6 x 12mm M5 x 20mm 4 of 21
1 a b 15mm Leg Mounting Hardware 2 Leg Cover Mounting Screws 8x M3.5 x 6mm 5 of 21
3 a Shelf Mounting Hardware M3 x 39mm b c Shelf Mounting Hardware M3 x 39mm 6x 6 of 21
4 25-36 lbs (11.3-16 kg) Holds displays with the following VESA mounting hole pattern: 25-50 lbs (11.3-22.7 kg) Holds displays with the following VESA mounting hole pattern: 75 x 75 mm 100 x 100 mm 200 x 100 mm 200 x 200 mm 100 x 100 mm 200 x 200 mm 200 x 300 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 500 x 200 mm 500 x 300 mm 600 x 200 mm 600 x 300 mm 200 x 400 mm 300 x 400 mm 400 x 400 mm 500 x 400 mm 600 x 400 mm 4 14 4 5 6 M6 x 8mm M5 x 8mm 7 of 21
25-36 lbs (11.3-16 kg) 7 100mm (3-15/16 ) 75mm (2-15/16 ) A 75x75mm 100x100mm 9 100mm (3-15/16 ) 75mm (2-15/16 ) 100mm (3-15/16 ) B 100x200mm 10 200mm (7-7/8 ) 200mm (7-7/8 ) C 200x200mm 10 200mm (7-7/8 ) 200mm (7-7/8 ) D 200x100mm 10 100mm (3-15/16 ) 8 of 21
7 A 75x75mm 100x100mm 100mm (3-15/16 ) 75mm (2-15/16 ) 100mm (3-15/16 ) 75mm (2-15/16 ) M4 x 12mm 8 12 9 of 21
B C D 100x200mm 200x200mm 200x100mm 100mm (3-15/16 ) 200mm (7-7/8 ) 200mm (7-7/8 ) 100mm (3-15/16 ) 200mm (7-7/8 ) 200mm (7-7/8 ) 7a M5 x 7mm 7b M4 x 12mm M5 x 12mm M6 x 12mm 11 10 of 21
NOTE: Follow this step only if your TV/monitor has M8 holes which need to be reduced to M5. Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor screws to secure. M5 x 20mm NOTE: Follow this step only for Samsung models using the holder ring. Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws and Samsung holder ring to secure. M5 x 20mm 11 of 21
8 25-36 lbs (11.3-16 kg) 重要! 本製品は取り付け後に調整する必要があります 調整を行う前に すべての機器が本製品に適切に取り付けられていることを確認してください 本製品は可動範囲内でスムーズかつ簡単に動く必要があり 選定した位置にしっかり固定されなければなりません 製品が簡単に動きすぎる場合 動きがぎこちない場合 あるいは目的の位置に固定されない場合は 説明書に従いスムーズに動くように調整してください お使いの製品や調整によっては 違いがはっきりするまで何回か回さなければならないこともあります 本製品に機器を追加したり 機器を取り外したことで積載重量が変わった場合は 安全かつ最適な操作を実現するために調節手順を繰り返してください a 14mm 12 of 21
b 4mm 9 10 19 13 of 21
25-50 lbs (11.3-22.7 kg) 4 a TM Mounting Hardware M6x8mm b TM Mounting Hardware M8 x 14mm 13mm 5 100 mm 100 mm 7 16 200 mm 300 mm 400 mm 500 mm 600 mm 600 mm 500 mm 400 mm 300 mm 200 mm 400mm Extension Hardware M5 x 16mm 14 of 21
25-50 lbs (11.3-22.7 kg) 6 Large Display Cart Hardware M6x20mm M6x45mm M8x25mm M20mm M40mm M5x20mm M5x40mm 5.1(ID) x 10(OD) x 6mm 8.1(ID) x 16(OD) x 6mm 5.1(ID) x 10(OD) x 18mm 8.1(ID) x 16(OD) x 24mm 5.1(ID) x 10(OD) x 12mm M8x50mm 8x 8.1(ID) x 16(OD) x 12mm 5.3(ID) x 16(OD) x 1.0mm 6.3(ID) x 14(OD) x 1.0mm Ø M4 M5 M6 M8 M20mm M5x20mm M6x20mm M8x25mm 20 mm 20 mm 20 mm 25 mm 6mm 6mm 6mm 6mm 6mm M40mm M5x40mm M6x45mm M8x50mm 40 mm 40 mm 45 mm 50 mm 18mm 24mm 12mm 12mm 15 of 21
25-50 lbs (11.3-22.7 kg) a b 100x100mm VESA Plate Hardware M5 x 10mm 7 100 mm 100 mm 200 mm 300 mm 400 mm 500 mm 600 mm y 1 = y 2 x < 600mm g * 16 of 21
25-50 lbs (11.3-22.7 kg) 8 a b TM Mounting Hardware M4 x 16mm c TM Mounting Hardware a b 17 of 21
25-50 lbs (11.3-22.7 kg) 9 重要! 本製品は取り付け後に調整する必要があります 調整を行う前に すべての機器が本製品に適切に取り付けられていることを確認してください 本製品は可動範囲内でスムーズかつ簡単に動く必要があり 選定した位置にしっかり固定されなければなりません 製品が簡単に動きすぎる場合 動きがぎこちない場合 あるいは目的の位置に固定されない場合は 説明書に従いスムーズに動くように調整してください お使いの製品や調整によっては 違いがはっきりするまで何回か回さなければならないこともあります 本製品に機器を追加したり 機器を取り外したことで積載重量が変わった場合は 安全かつ最適な操作を実現するために調節手順を繰り返してください 14mm 18 of 21
10a Power Strip Hardware M5x9mm b c Cable Management Support Hardware d 12 a b Cable Management Support Hardware M5x8mm 19 of 21
c Cable Management Support Hardware d Top Cap Hardware M5x8mm 20 of 21
www.computingcomfort.org 保証書をご覧ください : www.ergotron.com/warranty サービスをご覧ください : www.ergotron.com 最寄りのカスタマーケアの電話番号については こちらをご覧ください : http://contact.ergotron.com 2015 Ergotron, Inc. All rights reserved. 21 of 21