MANUAL SUPPLEMENT 3-2 3-2 Agilent 1 3-2 P/N 16000-99023 Print Date: October 2001 PRINTED IN JAPAN Copyright Agilent Technologies Japan, Ltd. 2001 1-3-2, Murotani, Nishi-ku, Kobe-shi, Hyogo, 651-2241 JAPAN
Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A Jun 2009 Change 1 Add TAR and change the Measurement Uncertainty value of Source Voltage Accuracy Test (Page 9-19) to the following. Source Voltage Setting Test Limits Test Result 1 Measurement Uncertainty 0 V ±0.10 V V ± 0.00021V 485 10 V ±0.12 V V ± 0.00027V 433 25 V ±0.14 V V ± 0.00054V 257 50 V ±0.18 V V ± 0.00096V 188 100 V ±0.26 V V ± 0.00185V 141 200 V ±0.42 V V ± 0.0037 V 115 201 V ±0.82 V V ± 0.0040 V 206 250 V ±0.90 V V ± 0.0053 V 170 500 V ±1.3 V V ± 0.0097 V 133 1000 V ±2.1 V V ± 0.0188 V 112 TAR Change 2 Add TAR and change the Measurement Uncertainty value of Ammeter Offset Voltage Test (Page 9-19) to the following. Test Limits Test Result 1 Measurement Uncertainty TAR ±0.5 mv mv ± 0.0083 mv 60.27 Change 3 Add TAR and change the Measurement Uncertainty value of Ammeter Input Resistance Test (Page 9-19) to the following. Test Limits Test Result 1 Measurement Uncertainty TAR ±50 ohm ohm ± 4.37 ohm 11.5 C Copyright 2008 Agilent Technologies
Change 4 Add TAR and change the Measurement Uncertainty value of Current Measurement Accuracy Test (Page 9-20) to the following. Test Current Test Limits Measurement Time Test Result 1 Measurement Uncertainty 100 pa ±2.6 pa Long pa ± 0.27 pa 9.8 1 na ±0.0094 na Long na ± 0.0007 na 13.1 10 na ±0.063 na Long na ± 0.0074 na 8.4 100 na ±0.53 na Long na ± 0.046 na 11.4 1 μa ±0.0043 μa Long μa ± 0.0005 µa 8.1 10 μa ±0.036 μa Long μa ± 0.0053 µa 6.7 100 μa ±0.60 μa Long μa ± 0.056 µa 10.7 TAR Change 5 Add TAR and change the Measurement Uncertainty value of Resistance Measurement Accuracy Test (Floating Device) (Page 9-20) to the following. Resistor Setting Voltage Setting Measurement Time Test Limits 10 6 ohm 100 V Short ±0.0086 x 10 6 ohm 10 7 ohm 100 V Long ±0.0063 x 10 7 ohm 10 8 ohm 100 V Long ±0.0073 x 10 8 ohm 10 9 ohm 100 V Long ±0.0093 x 10 9 ohm 10 10 ohm 100 V Long ±0.0273 x 10 10 ohm 10 11 ohm 100 V Long ±0.0453 x 10 11 ohm 10 11 ohm 100 V Short ±0.0550 x 10 11 ohm 10 11 ohm 10 V Long ±0.0546 x 10 11 ohm Test Result 1 Measurement Uncertainty TAR x 10 6 ohm ± 0.00015 10 6 58.2 ohm x 10 7 ohm ± 0.0003 10 7 ohm 21.5 x 10 8 ohm ± 0.0006 10 8 ohm 11.9 x 10 9 ohm ± 0.0007 10 9 ohm 13.9 x 10 10 ohm ± 0.0012 10 10 ohm 22.3 x 10 11 ohm ± 0.0035 10 11 ohm 12.8 x 10 11 ohm ± 0.0035 10 11 ohm 15.6 x 10 11 ohm ± 0.0035 10 11 ohm 15.5 C Copyright 2008 Agilent Technologies
Change 6 Add TAR and change the Measurement Uncertainty value of Resistance Measurement Accuracy Test (Grounded Device) (Page 9-20) to the following. Resistor Setting Voltage Setting 10 7 ohm 100 V ±0.0066 x 10 7 ohm 10 11 ohm 10 V ±0.0573 x 10 11 ohm Test Limits Test Result 1 Measurement Uncertainty TAR x 10 7 ohm ± 0.0003 10 7 ohm 22.6 x 10 11 ohm ± 0.0035 10 11 ohm 16.2 C Copyright 2008 Agilent Technologies
Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A Sep 2008 Change 1 Change the Measurement Uncertainty value of Source Voltage Accuracy Test (Page 9-19) to the following. Source Voltage Setting Test Limits Test Result 1 Measurement Uncertainty 0 V ±0.10 V V ± 0.000206 V 10 V ±0.12 V V ± 0.00027 V 25 V ±0.14 V V ± 0.00054V 50 V ±0.18 V V ± 0.0010 V 100 V ±0.26 V V ± 0.0019 V 200 V ±0.42 V V ± 0.0037 V 201 V ±0.82 V V ± 0.0040 V 250 V ±0.90 V V ± 0.0053 V 500 V ±1.3 V V ± 0.0097 V 1000 V ±2.1 V V ± 0.0188 V Change 2 Change the Measurement Uncertainty value of Ammeter Offset Voltage Test (Page 9-19) to the following. Test Limits Test Result 1 Measurement Uncertainty ±0.5 mv mv ± 0.0083 mv Change 3 Change the Measurement Uncertainty value of Ammeter Input Resistance Test (Page 9-19) to the following. Test Limits Test Result 1 Measurement Uncertainty ±50 ohm ohm ± 4.37 ohm C Copyright 2008 Agilent Technologies
Change 4 Change the Measurement Uncertainty value of Current Measurement Accuracy Test (Page 9-20) to the following. Test Current Test Limits Measurement Time Test Result 1 Measurement Uncertainty 100 pa ±2.6 pa Long pa ± 0.27 pa 1 na ±0.0094 na Long na ± 0.0007 na 10 na ±0.063 na Long na ± 0.0074 na 100 na ±0.53 na Long na ± 0.046 na 1 μa ±0.0043 μa Long μa ± 0.0005 µa 10 μa ±0.036 μa Long μa ± 0.0053 µa 100 μa ±0.60 μa Long μa ± 0.056 µa Change 5 Change the Measurement Uncertainty value of Resistance Measurement Accuracy Test (Floating Device) (Page 9-20) to the following. Resistor Setting Voltage Setting Measurement Time Test Limits Test Result 1 Measurement Uncertainty 10 6 ohm 100 V Short ±0.0086 x 10 6 ohm x 10 6 ohm ± 0.00015 10 6 ohm 10 7 ohm 100 V Long ±0.0063 x 10 7 ohm x 10 7 ohm ± 0.0003 10 7 ohm 10 8 ohm 100 V Long ±0.0073 x 10 8 ohm x 10 8 ohm ± 0.0006 10 8 ohm 10 9 ohm 100 V Long ±0.0093 x 10 9 ohm x 10 9 ohm ± 0.0007 10 9 ohm 10 10 ohm 100 V Long ±0.0273 x 10 10 ohm x 10 10 ohm ± 0.0012 10 10 ohm 10 11 ohm 100 V Long ±0.0453 x 10 11 ohm x 10 11 ohm ± 0.0035 10 11 ohm 10 11 ohm 100 V Short ±0.0550 x 10 11 ohm x 10 11 ohm ± 0.0035 10 11 ohm 10 11 ohm 10 V Long ±0.0546 x 10 11 ohm x 10 11 ohm ± 0.0035 10 11 ohm Change 6 Change the Measurement Uncertainty value of Resistance Measurement Accuracy Test (Grounded Device) (Page 9-20) to the following. Resistor Setting Voltage Setting Test Limits Test Result 1 Measurement Uncertainty 10 7 ohm 100 V ±0.0065 x 10 6 ohm x 10 7 ohm ± 0.0003 10 7 ohm 10 11 ohm 10 V ±0.0573 x 10 11 ohm x 10 11 ohm ± 0.0035 10 11 ohm C Copyright 2008 Agilent Technologies
Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A June 2007 Change 1 Add the following note to the 3-c. Turning ON the 4339B (page 1-13). Note In case the setting of the ac line frequency is not match, there s any possibility the measurement error will rise. Make sure the ac line frequency has been set up correctly. Change 2 Add the following condition to the Measurement Accuracy (page 8-4). 6. The ac line frequency has been set up correctly. C Copyright 2007 Agilent Technologies
マニュアルチェンジ 変更 1 4339B の電源投入の手順 3-c( ページ 1-11) に以下の注記を追加して下さい 注記 AC 電源周波数の設定値が一致していない場合 測定誤差が増大する可能性があります 必ず AC 電源周波数を正しく設定して下さい 変更 2 測定確度の条件 ( ページ 8-4) に以下の条件を追加して下さい 6. AC 電源周波数が正しく設定されている C Copyright 2007 Agilent Technologies
Manual Change Agilent Part No. N/A August 2004 Printed in Japan Change Change the company name from (YOKOGAWA-) HEWLETT-PACKARD, LTD., or its abbreviation HP (YHP) to Agilent Technologies or Agilent. This document may contain references to HP (YHP) or (Yokogawa-) Hewlett-Packard. Please note that Hewlett-Packard s former test and measurement, semiconductor products and chemical analysis businesses are now part of Agilent Technologies. To reduce potential confusion, the only change to product numbers and names has been in the company name prefix: where a product number/name was HP XXXX the current name/number is now Agilent XXXX. For example, model number HP4294A is now model number Agilent 4294A. 変更 マニュアル チェンジ 本文中の HP(YHP) または ( 横河 ) ヒューレット パッカード株式会社 という語句を Agilent または アジレント テクノロジー株式会社 と変更してください ヒューレット パッカード社の電子計測 半導体製品 化学分析ビジネス部門は分離独立し アジレント テクノロジー社となりました 社名変更に伴うお客様の混乱を避けるため 製品番号の接頭部のみ変更しております ( 例 : 旧製品名 HP 4294A は 現在 Agilent 4294A として販売いたしております ) Copyright 2004 Agilent Technologies
Safety Summary When you notice any of the unusual conditions listed below, immediately terminate operation and disconnect the power cable. Contact your local Agilent Technologies sales representative or authorized service company for repair of the instrument. If you continue to operate without repairing the instrument, there is a potential fire or shock hazard for the operator. Instrument operates abnormally. Instrument emits abnormal noise, smell, smoke or a spark-like light during the operation. Instrument generates high temperature or electrical shock during operation. Power cable, plug, or receptacle on instrument is damaged. Foreign substance or liquid has fallen into the instrument. 使用上の安全について 以下のような異常が見られたときは 直ちに使用を中止して電源プラグを抜き 最寄りの当社セールス オフィス オフィスまたは当社指定のサービス会社に連絡して修理を受けて下さい そのまま使用を続けると 火災や感電のおそれがあります 正常な動作をしない 動作中に異音 異臭 発煙あるいはスパークのような光が発生した 使用時に異常な高温や電気ショックを感じた 電源コード 電源プラグ 電源コネクタが損傷した 製品内に異物 液体などが入った