GA-G41MT-S2 LGA775 (Intel Core /Intel Pentium /Intel Celeron ) MJ-G41MTS2-1301R

Size: px

Start display at page:

Download "GA-G41MT-S2 LGA775 (Intel Core /Intel Pentium /Intel Celeron ) MJ-G41MTS2-1301R"

へいぞういなおか
5 years ago
Views:

1 GA-G41MT-S2 LGA775 (Intel Core /Intel Pentium /Intel Celeron ) MJ-G41MTS2-1301R

2 Motherboard GA-G41MT-S2 Oct. 1, 2010 Motherboard GA-G41MT-S2 Oct. 1, 2010

3 2010 GIGA-BYTE TECHNOLOGY CO., LTD. GIGABYTE GIGABYTE GIGABYTE Webhttp:// REV X.X REV BIOS

4 GA-G41MT-S CPU CPU CPU BIOS MB Intelligent Tweaker (M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor/User Password Save & Exit Setup Exit Without Saving Installing Chipset Drivers ()

5 GA-G41MT-S2 KB_MS ATX_12V CPU_FAN COMA LGA775 VGA R_USB ATX USB_LAN AUDIO F_AUDIO Intel G41 GA-G41MT-S2 Atheros AR8151 PCIEX1_1 BATTERY CLR_CMOS B_BIOS M_BIOS DDR3_1 DDR3_2 F_PANEL PCIEX16 ite IT8718 PCIEX1_2 CODEC PCI Intel ICH7 SATA2_3 LPT SYS_FAN F_USB2 SATA2_2 SATA2_1 F_USB1 SATA2_0 GA-G41MT-S2 SATA (x2) I/O - 5 -

6 1 1-1 (ESD) S/N () AC CPU (ESD) ESD - 6 -

7 1-2 製品の仕様 CPU フロントサイドバスチップセットメモリオンボードグラフィックスオーディオ LGA 775 パッケージの Intel Core 2 Extreme プロセッサ/ Intel Core 2 Quad プロセッサ/Intel Core 2 Duo プロセッサ/ Intel Pentium プロセッサ/Intel Celeron プロセッサ LGA 775パッケージ同梱 (最新の CPU サポートリストについては GIGABYTE の Web サイトにアクセスしてください) L2 キャッシュは CPU で異なります 1333/1066/800 MHz FSB ノースブリッジ: Intel G41 Express チップセットサウスブリッジ: Intel ICH7 最大 4GB のシステムメモリをサポートする 1.5V DDR3 DIMM ソケット (x2) デュアルチャンネルメモリアーキテクチャ DDR3 1066/800 MHz メモリモジュールのサポート (サポートされる最新のメモリ速度とメモリモジュールについては GIGABYTE の Web サイトにアクセスしてください ) ノースブリッジに統合: - D-Sub ポート (x1) VIA VT1708S コーデックハイディフィニションオーディオ 2/4/5.1/7.1 チャンネル * 7.1 チャンネルオーディオを構成するにはフロントパネル経由で HD Audio 規格のポートに接続しオーディオドライバを通してマルチチャンネルオーディオ機能を有効にする必要があります LAN 拡張スロットストレージインターフェイス USB 内部コネクタ 1 x Atheros AR8151 チップ (10/100/1000 Mbit) (x1) PCI Express x16 スロット (x1) x16 で実行 PCI Express x1 スロット (x2) PCI スロット (x1) サウスブリッジ: - 最大 4 つの SATA 3Gb/s デバイスをサポートする SATA 3Gb/s コネクタ (x4) サウスブリッジ: - 最大 8 の USB 2.0/1.1 ポート (背面パネルに 4 つ内部 USB ヘッダに接続された USB ブラケットを介して 4 つ) 24 ピン ATX メイン電源コネクタ (x1) 4 ピン ATX 12V 電源コネクタ (x1) SATA 3Gb/s コネクタ (x4) CPU ファンヘッダ (x1) システムファンヘッダ (x1) 前面パネルヘッダ (x1) 前面パネルオーディオヘッダ (x1) USB 2.0/1.1 ヘッダ (x2) パラレルポート (x1) クリアリング CMOS ジャンパ (x1) -7- ハードウェアの取り付け

8 背面パネルのコネクタ PS/2 キーボードポート (x1) PS/2 マウスポート (x1) シリアルポート (x1) D-Sub ポート (x1) USB 2.0/1.1 ポート (x4) RJ-45 ポート (x1) オーディオジャック (x3) (ラインイン/ラインアウト/マイク) I/O コントローラ ite IT8718 ハードウェアモニタシステム電圧の検出 CPU / システム温度検出 CPU / システムファン速度の検出 CPU 過熱警告 CPU / システムファンエラー警告 CPU ファン速度コントロール * CPUファン速度コントロール機能がサポートされているかどうかは取り付けたCPU クーラーによって異なります BIOS 固有の機能 8 Mbit フラッシュ (x2) ライセンスを受けた AWARD BIOS の使用 DualBIOS のサポート PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI のサポート Q-Flash のサポート Xpress BIOS Rescue のサポート Download Center のサポート Xpress Install のサポート Xpress Recovery2 のサポート EasyTune のサポート Easy Energy Saver のサポート * EasyTune の使用可能な機能はマザーボードのモデルによって異なります * ハードウェアの制限により Easy Energy Saverのサポートを有効にするには Intel CoreTM 2 Extreme/ CoreTM 2 Quad/ CoreTM 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron 400シリーズCPUを取り付ける必要がありますバンドルされたソフトウェアオペレーティングシステムフォームファクタ Time Repair のサポート ON/OFF Charge のサポート Q-Share のサポート Norton インターネットセキュリティ (OEM バージョン) Microsoft Windows 7/Vista/XP のサポートマクロ ATX フォームファクタ 24.4cm x 19.4cm *G IGABYTEは事前の通知なしに製品仕様と製品関連の情報を変更する権利を留保しますハードウェアの取り付け -8-

9 1-3 CPU CPU CPU CPU ( CPU GIGABYTE Web ) CPU CPU 1 CPU ( CPU CPU ) CPU CPU CPU CPU CPU CPU CPU CPU CPU LGA775 CPU LGA 775 CPU CPU 1 CPU 1-9 -

10 1-4 GIGABYTE Web DDR3 BIOS 2 2 DDR3 21 0: DDR3_1 1: DDR3_2 DDR3_1 DDR3_2 1. DDR

11 1-6 PS/2 PS/2 PS/2 PS/2 D-Sub D-Sub 15 D-Sub D-Sub USB 2.0/1.1 USB USB 2.0/1.1 USB /USB USB USB RJ-45 LAN Gigabit LAN 1 Gbps LAN LED / LED LAN LED / LED 1 Gbps 100 Mbps 10 Mbps LED LAN () () 2 4/5.1 () 7.1HD Audio

12 ) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN 5) SATA2_0/1/2/3 6) F_PANEL 7) F_AUDIO 8) F_USB1/F_USB2 9) LPT 10) CLR_CMOS 11) BATTERY

13 1/2) ATX_12V/ATX (2x2 12V 2x12 ) 12V CPU 12V 500W 3 1 ATX_12V 4 2 ATX_12V: 1 GND 2 GND 3 +12V 4 +12V ATX : V V 2 3.3V 14-12V 3 GND 15 GND 4 +5V 16 PS_ON (/ ) 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND V V SB ( +5V) 21 +5V ATX V 22 +5V V (2x12 ATX ) 23 +5V (2x12 ATX ) V (2x12 ATX ) 24 GND (2x12 ATX )

3/4) CPU_FAN/SYS_FAN (ファンヘッダ) マザーボードには 4 ピン CPU ファンヘッダ (CPU_FAN) と 3 ピンシステムファンヘッダ (SYS_FAN) が搭載されていますほとんどのファンヘッダは絶対確実な挿入設計が施されていますファンケーブルを接続するとき正しい方向に接続してください (黒いコネクタワイヤはアース線です) マザーボードは CPU

14 3/4) CPU_FAN/SYS_FAN (ファンヘッダ) マザーボードには 4 ピン CPU ファンヘッダ (CPU_FAN) と 3 ピンシステムファンヘッダ (SYS_FAN) が搭載されていますほとんどのファンヘッダは絶対確実な挿入設計が施されていますファンケーブルを接続するとき正しい方向に接続してください (黒いコネクタワイヤはアース線です) マザーボードは CPU ファン速度制御をサポートしファン速度制御設計を搭載した CPU ファンを使用する必要があります最適の放熱を実現するためにシャーシ内部にシステムファンを取り付けるようにお勧めします CPU_FAN 1 CPU_FAN ピン番号定義 1 GND 2 +12V/速度制御 3 検知 4 速度制御 SYS_FAN 1 SYS_FAN ピン番号定義 1 GND 2 +12V 3 検知 DEBUG PORT DEBUG PORT CPU およびシステムが過熱しないようにファンケーブルをファンヘッダに必ず DEBUG 接続してください過熱すると CPUが損傷したりまたはシステムがハングアップPORT する結果となります DEBUG これらのファンヘッダは設定ジャンパブロックではありませんヘッダにジャン PORT プのキャップを取り付けないでください 5) SATA2_0/1/2/3 (SATA 3Gb/s コネクタ) SATA コネクタはSATA 3Gb/s 標準に準拠し SATA 1.5Gb/s 標準との互換性を有していますそれぞれの SATA コネクタは単一の SATA デバイスをサポートします SATA2_3 7 1 SATA2_2 7 1 SATA2_ SATA2_0 ピン番号定義 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND SATA ケーブルの L 形状の端を SATA ハードドライブに接続してくださいハードウェアの取り付け

15 6) F_PANEL () / / LED PWR- SPEAK- SPEAK+ PW- PW+ MSG- MSG PWR+ CI+ CI- RES+ RES- HD- HD+ LED LED MSG/PWR (// LED): LED LED S0 S1 LED S1 S3/S4 S3/S4/S5 (S5)LED PW (): ( 2 BIOS ) SPEAK (): 1 BIOS HD (IDE LED): LED LED RES (): CI (): // LED LED

16 7) F_AUDIO () Intel (HD) AC97 HD 1 MIC2_L 2 GND 3 MIC2_R 4 -ACZ_DET 5 LINE2_R 6 GND 7 FAUDIO_JD 8 9 LINE2_L 10 GND AC97 1 MIC 2 GND 3 MIC 4 NC 5 6 NC 7 NC NC HD 8) F_USB1/F_USB2 (USB ) USB 2.0/1.1 USB USB 2 USB USB (5V) 2 (5V) 3 USB DX- 4 USB DY- 5 USB DX+ 6 USB DY+ 7 GND 8 GND 9 10 NC IEEE 1394 (2x5 ) USB USB USB

17 9) LPT LPTLPT1 LPT STB- 14 GND 2 AFD- 15 PD6 3 PD0 16 GND 4 ERR- 17 PD7 5 PD1 18 GND 6 INIT- 19 ACK- 7 PD2 20 GND 8 SLIN- 21 BUSY 9 PD3 22 GND 10 GND 23 PE 11 PD GND 25 SLCT 13 PD5 26 GND 10) CLR_CMOS ( CMOS ) CMOS ( BIOS ) CMOS CMOS CMOS CMOS CMOS BIOS (Load Optimized Defaults ) BIOS (BIOS 2 BIOS )

18 11) BATTERY CMOS (BIOS ) CMOS CMOS ( 5 ) (+) (-) ()

19 2 BIOS BIOS POST <Delete> BIOS BIOS <Ctrl> + <F1> BIOS GIGABYTE Q-Flash Windows BIOS BIOS BIOS BIOS BIOS BIOS BIOS () CMOS (CMOS 1 /CMOS ) 2-1 BIOS Award Modular BIOS v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. G41MT-S2 E10c.... <DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 09/20/2010-G41-ICH7-6A79PG0IC BIOS () <Enter> ( BIOS : E10c) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Change CPU's Clock & Voltage BIOS

20 <Ctrl>+<F1> Load Optimized Defaults BIOS BIOS <F11> <F12> () F11 : Save CMOS to BIOS BIOS 8 ( 1-8) (SPACE ) <Enter> F12 : Load CMOS from BIOS BIOS BIOS BIOS <Enter> 2-3 MB Intelligent Tweaker (M.I.T.) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster [] CPU Clock Ratio () [10X] Fine CPU Clock Ratio () [+0.0] CPU Frequency 2.66GHz ( 266x10) ******** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control [Disabled] x CPU Host Frequency (Mhz) 266 PCI Express Frequency (Mhz) [] >>>>> Advanced Clock Control ******** DRAM Performance Control ******** Performance Enhance [Standard] (G)MCH Frequency Latch [] System Memory Multiplier (SPD) [] Memory Frequency (Mhz) DRAM Timing Selectable (SPD) [] >>>>> Standard Timing Control Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults () CPU BIOS

21 CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) x CAS Latency Time 9 x trcd 9 x trp 9 x tras 24 >>>>> Advanced Timing Control } Advanced Timing Control [Press Enter] ******** Mother Board Voltage Control ******** Voltage Types Normal Current >>> CPU CPU Vcore V [] CPU Termination 1.200V [] >>> DRAM DRAM Voltage 1.500V [] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults / / CPU (CMOS ) Robust Graphics Booster R.G.B. () BIOS R.G.B. ()FastTurbo CPU Clock Ratio () CPU CPU Fine CPU Clock Ratio () CPU0.5 CPU CPU Frequency CPU ******** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control CPU /Enabled CPU Host Frequency 20 CMOS ( Disabled) () CPU BIOS

22 CPU Host Frequency (Mhz) CPU CPU Host Clock Control 100 MHz1200 MHz Important: CPU CPU PCI Express Frequency (Mhz) PCIe 90 MHz 150 MHz PCIe 100 MHz ( ) ******** DRAM Performance Control ******** Performance Enhance 3 Standard () Turbo Extreme (G)MCH Frequency Latch 200MHz, 266MHz, 333MHz System Memory Multiplier (SPD) CPU FSB SPD (G) MCH Frequency Latch ( ) Memory Frequency (Mhz) 2 CPU Host Frequency (Mhz) System Memory Multiplier DRAM Timing Selectable (SPD) Manual () DRAM : ( ), Manual () >>>>> Standard Timing Control CAS Latency Time : ()4~11 trcd : ()1~15 trp : ()1~15 tras : ()1~63 >>>>> Advanced Timing Control Advanced Timing Control () CPU BIOS

23 x trrd x twtr x twr x trfc x trtp x Command Rate (CMD) CMOS Setup Utility-Copyright (C) Award Software Advanced Timing Control Item Help Menu Level >>>>> Channel A } Channel A Timing Settings [Press Enter] } Channel A Driving Settings [Press Enter] >>>>> Channel B } Channel B Timing Settings [Press Enter] } Channel B Driving Settings [Press Enter] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults trrd : ()1~15 twtr : ()1~31 twr : ()1~31 trfc : ()1~255 trtp : ()1~15 Command Rate(CMD) : ()1~3 >>>>> Channel A/B Channel A/B Timing Settings x Static tread Value x trd Phase0 Adjustment x trd Phase1 Adjustment x trd Phase2 Adjustment x trd Phase3 Adjustment CMOS Setup Utility-Copyright (C) Award Software Channel A/B Timing Settings Item Help Menu Level x Trd2rd(Different Rank) x Twr2wr(Different Rank) x Twr2rd(Different Rank) x Trd2wr(Same/Diff Rank) x DIMM1 Clock Skew Control x DIMM2 Clock Skew Control x DDR Write Leveling x DDR Write Training : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Static tread Value : ()1~ BIOS

24 trd Phase0 Adjustment : ()0-Normal1-Advanced trd Phase1 Adjustment : ()0-Normal1-Advanced trd Phase2 Adjustment : ()0-Normal1-Advanced trd Phase3 Adjustment : ()0-Normal1-Advanced Trd2rd(Different Rank) : ()1~15 Twr2wr(Different Rank) : ()1~15 Twr2rd(Different Rank) : ()1~15 Trd2wr(Same/Diff Rank) : ()1~15 DIMM1 Clock Skew Control : ()+800ps~-700ps DIMM2 Clock Skew Control : ()+800ps~-700ps DDR Write Leveling BIOS() Enabled Disabled DDR Write Training BIOS() Enabled Disabled Channel A/B Driving Settings x Driving Strength Profile x Data Driving Pull-Up Level x Cmd Driving Pull-Up Level x Ctrl Driving Pull-Up Level x Clk Driving Pull-Up Level CMOS Setup Utility-Copyright (C) Award Software Channel A/B Driving Settings Item Help Menu Level x Data Driving Pull-Down Lev x Cmd Driving Pull-Down Lev x Ctrl Driving Pull-Down Lev x Clk Driving Pull-Down Lev : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults BIOS

25 Driving Strength Profile : () Data Driving Pull-Up Level : ()+8~-7 Cmd Driving Pull-Up Level : ()+8~-7 Ctrl Driving Pull-Up Level : ()+8~-7 Clk Driving Pull-Up Level : ()+8~-7 Data Driving Pull-Down Lev : ()+8~-7 Cmd Driving Pull-Down Lev : ()+8~-7 Ctrl Driving Pull-Down Lev : ()+8~-7 Clk Driving Pull-Down Lev : ()+8~-7 ******** Mother Board Voltage Control ******** >>> CPU CPU Vcore CPU Termination >>> DRAM DRAM Voltage BIOS

26 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) The, Sep Time (hh:mm:ss) 22:31:24 } IDE Channel 0 Master [None] } IDE Channel 0 Slave [None] } IDE Channel 1 Master [None] } IDE Channel 1 Slave [None] Item Help Menu Level Halt On Base Memory Extended Memory Total Memory [All, But Keyboard] 640K 988M 990M : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) Time (hh:mm:ss) IDE Channel 0, 1 Master/Slave IDE Channel 0/1 Master/SlaveIDE 3 IDE/SATA : POST BIOS IDE/SATA () None IDE/SATA None POST Manual CHS (IDE Channel 0 Master/Slave ) Access Mode (: ) Capacity Cylinder Head Precomp Landing Zone Sector Halt On POST [All Errors], [No Errors], [All, But Keyboard] (), [All, But Diskette], [All, But Disk/Key]. Memory BIOS POST BIOS

27 2-5 Advanced BIOS Features CMOS Setup Utility-Copyright (C) Award Software Advanced BIOS Features } Hard Disk Boot Priority [Press Enter] Quick Boot [Disabled] First Boot Device [Hard Disk] Second Boot Device [CDROM] Third Boot Device [Legacy LAN] Password Check [Setup] HDD S.M.A.R.T. Capability [Enabled] CPU Multi-Threading () [Enabled] Limit CPUID Max. to 3 () [Disabled] No-Execute Memory Protect () [Enabled] CPU Enhanced Halt (C1E) () [Enabled] C2/C2E State Support () [Disabled] CPU Thermal Monitor 2(TM2) () [Enabled] CPU EIST Function () [Enabled] Virtualization Technology () [Enabled] Delay For HDD (Secs) [0] Backup BIOS Image to HDD [Disabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Hard Disk Boot Priority Quick Boot / (: Disabled) First/Second/Third Boot Device Password Check BIOS BIOS Set Supervisor/ User Password Setup BIOS () System BIOS HDD S.M.A.R.T. Capability S.M.A.R.T. ( ) / / ( Disabled) CPU Multi-Threading () Intel CPU CPU Enabled CPU () Disabled 1 CPU () CPU Intel CPU Intel Web BIOS

28 Limit CPUID Max. to 3 () CPUID Windows XP Disabled Windows NT4.0 Enabled ( Disabled) No-Execute Memory Protect () Intel Execute Disable Bit / (Enabled) CPU Enhanced Halt (C1E) () Intel CPU Enhanced Halt (C1E) CPU / CPU ( Enabled) C2/C2E State Support () CPUC2/C2E CPU (Disabled) CPU Thermal Monitor 2 (TM2) () Intel CPU Thermal Monitor (TM2) CPU / CPU CPU (Enabled) CPU EIST Function () Intel SpeedStep Technology (EIST) /CPU Intel EIST CPU ( Enabled) Virtualization Technology () Intel /Intel 1 ( Enabled) Delay For HDD (Secs) BIOS 0 15 ( 0) Backup BIOS Image to HDD BIOSBIOS ( Disabled) () CPU Intel CPU Intel Web BIOS

29 2-6 Advanced Chipset Features ** VGA Setting ** Onboard VGA Init Display First PAVP Mode PAVP Lite Mode x Paranoid PAVP Mode Onboard VGA VGA / Enable If No Ext PEG PCI Express () Always Enable PCI Express VGA Always Enable () Init Display First PCIPCI Express PCI PCI () Onboard PEG PCI Express PAVP Mode PAVP HDCP PAVP ( ) Disabled PAVP Lite Mode Paranoid PAVP CMOS Setup Utility-Copyright (C) Award Software Advanced Chipset Features [Enable If No Ext PEG] [PCI] [PAVP Lite Mode] [32MB] (32+96)128MB Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults () 96 MB Windows Vista Aero (DWM) PAVP Lite Mode PAVP Mode PAVP Lite Mode : 32MB ()48MB64MB128MB256MB Paranoid PAVP Mode PAVP Mode Paranoid PAVP : (32+96)128MB ()(48+96)160MB(64+96)160MB(128+96)224MB (256+96)352MB PAVP Lite PAVP Lite PAVP Paranoid 128 AES ( 96 MB) BIOS

30 2-7 Integrated Peripherals CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals Azalia Codec [] Onboard H/W LAN [Enabled] } SMART LAN [Press Enter] Onboard LAN Boot ROM [Disabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] USB 1.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] USB Storage Function [Enabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Azalia Codec /() Disabled Onboard H/W LAN LAN /(Enabled) LAN Disabled SMART LAN (LAN ) Start detecting at Port... Part1-2 Status = Open / Length = 0m Part3-6 Status = Open / Length = 0m Part4-5 Status = Open / Length = 0m Part7-8 Status = Open / Length = 0m CMOS Setup Utility-Copyright (C) Award Software SMART LAN : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults BIOS Item Help Menu Level LAN Onboard LAN Boot ROM LAN ROM ( Disabled) Onboard Serial Port 1 / I/O 3F8/IRQ4 ()2F8/IRQ33E8/IRQ42E8/IRQ3Disabled Onboard Parallel Port (LPT)/I/0 378/IRQ7 (), 278/IRQ5, 3BC/IRQ7, Disabled

31 Parallel Port Mode (LPT): SPP ( )()EPP ()ECP ()ECP+EPP USB 1.0 Controller USB 1.0 /(Enabled) Disabled USB USB 2.0 Controller USB 2.0 /(Enabled) USB Keyboard Function MS-DOS USB (Disabled) USB Mouse Function MS-DOS USB (Disabled) USB Storage Function POST USB USB USB (Enabled) 2-8 Power Management Setup CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S3(STR)] Soft-Off by PWR-BTTN [Instant-Off] PME Event Wake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 HPET Support () [Enabled] HPET Mode () [32-bit mode] Power On By Mouse [Disabled] Power On By Keyboard [Disabled] x KB Power ON Password Enter AC Back Function [Soft-Off] ErP Support [Disabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ACPI S1(POS) ACPI S1 () S1 S3(STR) ACPI S3 (RAM ) ( )S3 S1 () Windows 7/Vista BIOS

32 Soft-Off by PWR-BTTN MS-DOS Instant-Off () Delay 4 Sec. 4 4 PME Event Wake Up PCI PCIe ACPI +5VSB 1A ATX ( Enabled) Power On by Ring ACPI ( Enabled) Resume by Alarm ( Disabled) Date (of Month) Alarm Time (hh mm ss) Alarm HPET Support () Windows 7/Vista HPET () /( Enabled) HPET Mode () Windows 7/Vista HPET HPET SupportEnabled ( 32-bit mode) Power On By Mouse PS/2 ( Disabled) +5VSB1AATX Double Click PS/2 Power On By Keyboard PS/2 ( Disabled) +5VSB 1A ATX Password 1~5 Keyboard 98 Windows 98 POWER KB Power ON Password Power On by Keyboard Password <Enter> 5 <Enter> <Enter> <Enter> <Enter> () Windows 7/Vista BIOS

33 AC Back Function AC Soft-Off AC () Full-On AC Memory AC ErP Support S51W ( Disabled) Enabled: PME LAN 2-9 PnP/PCI Configurations PCI1 IRQ Assignment CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations [] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI1 IRQ Assignment BIOS IRQ PCI () 3,4,5,7,9,10,11,12,14,15 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 2-10 PC Health Status CMOS Setup Utility-Copyright (C) Award Software PC Health Status Reset Case Open Status [Disabled] Case Opened No Vcore V DDR15V 1.520V +3.3V 3.328V +12V V Current CPU Temperature 32 o C Current CPU FAN Speed 1864 RPM Current SYSTEM FAN Speed 0 RPM CPU Warning Temperature [Disabled] CPU FAN Fail Warning [Disabled] SYSTEM FAN Fail Warning [Disabled] CPU Smart FAN Control [Enabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status Enabled Case Opened No ( Disabled) Case Opened CI Yes No Reset Case Open Status Enabled CMOS BIOS

34 Current Voltage(V) Vcore/DDR15V/+3.3V/+12V Current CPU Temperature CPU Current CPU/SYSTEM FAN Speed (RPM) CPU/ CPU Warning Temperature CPU CPU BIOS Disabled ()60 o C/140 o F, 70 o C/158 o F, 80 o C/176 o F, 90 o C/194 o F CPU/SYSTEM FAN Fail Warning CPU/ ( Disabled) CPU Smart FAN Control CPU /Enabled CPU CPU EasyTune CPU ( Enabled) 2-11 Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Fail-Safe Defaults (Y/N)? N Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Load Fail-Safe Defaults <Enter> <Y> BIOS BIOS BIOS

35 2-12 Load Optimized Defaults CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Optimized Defaults (Y/N)? N Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Load Optimized Defaults <Enter> <Y> BIOS BIOS BIOS CMOS 2-13 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Enter Password: Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Change/Set/Disable Password <Enter> 8 <Enter> <Enter> BIOS 2 : Supervisor Password Advanced BIOS Features Password Check Setup BIOS BIOS Password Check System BIOS ( ) User Password Password Check System () BIOS BIOS BIOS <Enter> <Enter> PASSWORD DISABLED BIOS

36 2-14 Save & Exit Setup CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Save to CMOS and EXIT (Y/N)? Load Y Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Save Data to CMOS <Enter> <Y> CMOS BIOS <N> <Esc> BIOS 2-15 Exit Without Saving CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Quit Without Saving (Y/N)? Load N Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Abandon all Data <Enter> <Y> CMOS BIOS BIOS <N> <Esc> BIOS BIOS

37 3 ( Run.exe ) 3-1 Installing Chipset Drivers () Xpress Install Install All () Xpress Install Install Single Items BIOS

38 GIGABYTE GIGABYTE GIGABYTE RoHS( )WEEE () GIGABYTE (RoHS) GIGABYTE (CdPbHgCr+6PBDEPBB) RoHS GIGABYTE (WEEE) GIGABYTE2002/96/EC WEEE() WEEE WEEE

39 () ( RoHS)

GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4003 Tech. and Non-Tech.

40 GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, Taiwan TEL: , FAX: Tech. and Non-Tech. Support (Sales/Marketing) : WEB address (English): WEB address (Chinese): GIGABYTE web web GIGABYTE (/ ) http//ggts.gigabyte.com.tw

1 124

1 124 7 1 2 3 4 5 6 7 8 9 10 11 12 1 124 Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals On-Chip Primary PCI IDE [Enabled] IDE Primary Master PIO [Auto] IDE Primary Slave PIO [Auto] IDE Primary