5
w w w w w
Press <F2> to enter SETUP or Press <F12> to boot from Network Enter Password
Main System Management BMC LAN Configuration Event Log Configuration Advanced Security Server Boot Save & Exit Additional setup menus to view server management features. Assert NMI on PERR Assert NMI on SERR FRB-2 Policy Boot Monitoring Boot Monitoring Policy Thermal Sensor Check previous System Config BMC IRQ POST Error Pause Memory Error Power Switch Inhibit AC-LINK Power ON Delay Time Platform Event Filtering CLI SETUP [Retry 3 Times] [Retry 3times] [IRQ 11] [Boot] [Last State] 20
w w w w w w Main Advanced Security Server Boot Save & Exit BIOS Information BIOS Version Build Date Access Level Memory Information Total Memory System Language System Date System Time 4. 6. XXXX 01/27/2010 Administrator 2048 MB [English] [Thu 01/15/2009] [20:33:57] Select the display language for system setup.
ç ñ
w w w
Main Advanced Security Server Boot Save & Exit Processor Configuration Memory Configuration PCI Configuration Advanced Chipset Configuration SATA Configuration USB Configuration Serial Port Configuration Memory Configuration Parameters Main Advanced Security Server Boot Save & Exit Processor Information Processor C3 Report EIST Turbo Boost Performance/Watt Server Class Execute Disable Bit VT-x Active Processor Cores Hyper-Threading [ACPI C3] [Power Optimized] [HPC] [All]
Main Advanced Security Server Boot Save & Exit Processor 1 CPUID Processor Type Processor Speed Processor Cores L2 Cache RAM L3 Cache RAM Microcode Revision EMT64 Hyper-Threading Processor 2 CPUID Processor Type Processor Speed Processor Cores L2 Cache RAM L3 Cache RAM Microcode Revision EMT64 Hyper-Threading 106a4 Intel (R) Xeon(R) CPU 2261 MHz Quad 1024 KB 9192 KB xxxx xxxx Supported Supported 106a4 Intel (R) Xeon(R) CPU 2261 MHz Quad 1024 KB 9192 KB xxxx xxxx Supported Supported Not Installed
Main Advanced Security Server Boot Save & Exit Memory Information Hardware Memory Test Memory Retest Memory RAS Mode Memory Frequency Memory Voltage NUMA [No] [Independent] [1333 MHz] [Low]
Main Advanced Security Server Boot Save & Exit Total Memory Available under 4GB CPU1_DIMM1 Status CPU1_DIMM2 Status CPU1_DIMM3 Status CPU1_DIMM4 Status CPU1_DIMM5 Status CPU1_DIMM6 Status CPU2_DIMM1 Status CPU2_DIMM2 Status CPU2_DIMM3 Status CPU2_DIMM4 Status CPU2_DIMM5 Status CPU2_DIMM6 Status 49152 MB 3072 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
Main Advanced Security Server Boot Save & Exit LAN Controller LAN1 Option ROM Scan LAN2 Option ROM Scan PCI Slot 0A Option ROM PCI Slot 2B Option ROM PCI Slot 3B Option ROM PCI Slot 1C Option ROM PCI Slot 2C Option ROM PCI Slot 3C Option ROM [PXE Boot] [PXE Boot] Disables / Enables the onboard LAN controller.
Main Advanced Security Server Boot Save & Exit HPET VT-d I/OAT QPI Frequency Wake On LAN/PME Wake On Ring Wake On RTC Alarm [Auto] Disables / Enables High Precision Event Timer.
Main Advanced Security Server Boot Save & Exit SATA Information SATA Mode Hard Disk Pre-Delay [IDE Mode]
Main Advanced Security Server Boot Save & Exit SATA Port0 SATA Port1 SATA Port2 SATA Port3 SATA Port4 SATA Port5 Not Present Not Present Not Present Not Present Not Present Not Present
Main Advanced Security Server Boot Save & Exit USB 2.0 Support Device Reset Timeout [20 sec] Disables / Enables USB 2.0 feature.
Main Advanced Security Server Boot Save & Exit Serial Port A Settings Serial Port A Serial A Base I/O Serial A Interrupt Serial Port B Settings Serial Port B Serial B Base I/O Serial B Interrupt Console Redirection Settings BIOS Redirection Port [3F8h] [IRQ 4] [2F8h] [IRQ 3] Configures serial port A using options. No configuration User configuration.
Main Advanced Security Server Boot Exit Password Configuration Administrator Password User Password Set the Administrator Password for system setup. Security Configuration Password On Boot Disable USB Ports Trusted Computing w w w
Main Advanced Security Server Boot Exit TPM Configuration TPM Support Current TPM Status Information TPM SUPPORT OFF Disables/Enables Trusted Platform Module support. Intel(R) TXT Configuration TXT Support Setup Notice : When the above "TPM Support", "TPM State" and the following menus are set to, "TXT Support" can be set to. VT-x VT-d Main Advanced Security Server Boot Exit TPM Configuration TPM Support TPM State Pending TPM operation Current TPM Status Information TPM Enabled Status TPM Active Status TPM Owner Status [None] [Deactivated] [UnOwned] Disables/Enables Trusted Platform Module support. Intel(R) TXT Configuration TXT Support Setup Notice : When the above "TPM Support", "TPM State" and the following menus are set to, "TXT Support" can be set to. VT-x VT-d
Main Advanced Security Server Boot Exit TPM Support TPM State Setup Notice : When "TXT Support" is set to, "TPM Support" and "TPM State" cannot be set to. Pending TPM operation [None] Disables/Enables Intel(R) Trusted Execution Technology. Current TPM Status Information TPM Enabled Status TPM Active Status TPM Owner Status [Activated] [UnOwned] Intel(R) TXT Configuration TXT Support VT-x VT-d Setup Notice : When "TXT Support" is set to, "VT-x" and "VT-d" cannot be set to.
Main Advanced Security Server Boot Save & Exit System Management BMC LAN Configuration Event Log Configuration Assert NMI on PERR Assert NMI on SERR FRB-2 Policy Boot Monitoring Boot Monitoring Policy Thermal Sensor Check previous System Config BMC IRQ POST Error Pause Memory Error Power Switch Inhibit AC-LINK Power ON Delay Time Platform Event Filtering CLI SETUP [Retry 3 Times] [Retry 3times] [IRQ 11] [Boot] [Last State] 20 Additional setup menus to view server management features.
Main Advanced Security Server Boot Save & Exit BIOS Version Board Part Number Board Serial Number System Part Number System Serial Number Chassis Part Number Chassis Serial Number Onboard LAN1 MAC Onboard LAN2 MAC Management LAN MAC BMC Device ID BMC Device Revision BMC Firmware Revision SDR Revision PIA Revision 4.6.XXXX xxxx xxxx xxxx xxxx xxx xxx xxx xxxx xxxx xxxx xxxx xxxx xxxx xxxxx
Main Advanced Security Server Boot Save & Exit BMC Network Configuration Shared BMC LAN LAN Connection Type IP Address Subnet Mask Default Gateway DHCP Web Interface HTTP HTTP Port Number HTTPS HTTPS Port Number Command Line Interface Telnet Telnet Port Number SSH SSH Port Number Clear BMC Configuration [Auto Negotiation] 192.168.1.1 255.255.255.0 0.0.0.0 Select [Enable] to share a s ystem LAN port with BMC LAN. If you use a management LAN port for the BMC, select [Disable].
Main Advanced Security Server Boot Save & Exit System Event Log Auto Clear Event Logs Clear All Event Logs
Main Advanced Security Server Boot Save & Exit Setup Notice If you select "System Event Log" menu below, it may take a few minutes to display. View System Event Log View System Event Log Main Advanced Security Server Boot Save & Exit ***************************************************** Setup Notice : If you select "View System Event Log" menu below, It may take a few minutes to display. ***************************************************** Getting System Event Logs... Number of SEL Entries = 919 DATE TIME SENSOR TYPE 05/28/10 18:10:19 System ACPI Power State 05/28/10 18:10:19 System Event 05/28/10 18:10:18 Button/Switch 05/28/10 17:37:35 System ACPI Power State 05/28/10 17:37:32 Reserved Type 05/28/10 17:37:32 OS Critical Stop 05/28/10 17:36:09 Reserved Type 05/28/10 17:36:09 OS Boot 05/28/10 17:35:53 System Boot Initiated 05/28/10 17:34:28 System Event 05/28/10 17:34:27 System Event 05/28/10 16:33:49 System Event 05/28/10 16:33:13 System Event 05/28/10 16:32:33 System ACPI Power State View System Event Log
w w w
Main Advanced Security Server Boot Save & Exit Boot Configuration Quiet Boot Bootup Numlock State Setup Prompt Timeout Boot Option Priorities Boot Option #1 Boot Option #2 Boot Option #3 Boot Option #4 CD/DVD ROM Drive BBS Priorities Floppy Drive BBS Priorities Hard Drive BBS Priorities Network Drive BBS Priorities [Off] 5 [CD/DVD Drive] [Y-E DATAUSB-FDU 7.03] [Hard Drive] [IBA GE Slot 0100 v...] Disables/Enables the Quiet Boot option
Main Advanced Security Server Boot Save & Exit Save Options Save Changes and Exit Discard Changes and Exit Save Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes.
3 2 1 3 2 1 3 2 1 3 2 1
w w w w w w w w w w