PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Marking requirements Dimensional requirements Load/speed performance, Rolling resistance Measurement by force method (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan 48084 Initial Accreditation Date: Issue Date: Expiration Date: March 31, 2012 January 26, 2017 February 28, 2019 Accreditation No.: Certificate No.: 70874 L17-45 The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: www.pjlabs.com Page 1 of 3
Certificate of Accreditation: Supplement Yoshiaki Otsuka Phone: 0463-35-9609 Accreditation is granted to the facility to perform the following testing: FIELD OF TEST Mechanical F ITEMS, MATERIALS OR PRODUCTS TESTED tires (PC), Light truck tires (LT), Truck/bus tires (TB) tires (PC) SPECIFIC TESTS OR PROPERTIES MEASURED Marking requirements, Dimensional requirements, Load/speed performance test (Except Run flat tire test) SPECIFICATION, STANDARD METHOD OR TECHNIQUE USED Marking requirements_ Dimensional measurement operating procedure (PD-02-108/109/110/111/112/113/ 114) Council Directive 92/23/EEC UN/ECE Regulation No.30, UN/ECE Regulation No.54, Load/speed performance test operating procedure (PD-02-108/111/114) Council Directive 92/23/EEC, UN/ECE Regulation No.30, RANGE (WHERE APPROPRIATE) AND DETECTION LIMIT Groove depth 11.1 mm TWI 1.65 mm to 2.15 mm Outside diameter Official tolerance requirements Minimum +0.4 % Maximum -0.4 % Overall width Official tolerance requirements Minimum +0.4 % Maximum -0.4 % Outer diameter difference before and after travelling ±3.1 % Issue: 01/2017 This supplement is in conjunction with certificate #L17-45 Page 2 of 3
Certificate of Accreditation: Supplement Yoshiaki Otsuka Phone: 0463-35-9609 Accreditation is granted to the facility to perform the following testing: FIELD OF TEST Mechanical F ITEMS, MATERIALS OR PRODUCTS TESTED Light truck tires (LT), Truck/bus tires (TB) SPECIFIC TESTS OR PROPERTIES MEASURED Load/speed performance test SPECIFICATION, STANDARD METHOD OR TECHNIQUE USED Load/speed performance test operating procedure (PD-02-109/110/112/113) RANGE (WHERE APPROPRIATE) AND DETECTION LIMIT Outer diameter difference before and after travelling ±3.1 % tires(c1), Light truck tires(c2), Truck/bus tires(c3) Rolling resistance measurement test by force method UN/ECE Regulation No.54, Rolling resistance measurement test operating procedure(pc RR Test instrument) (PD-04-293/300) C1, C2 tire: RRC 1.0 N/kN C3 tire: RRC 0.2 N/kN UN/ECE Regulation No.117, EC Regulation No.1222, ISO28580, No. 544 and South Korea s energy consumption efficiency grade indication system 1. The presence of a superscript F means that the laboratory performs testing of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this testing at its fixed location. 2. In, C1, C2 and C3 shall be replaced respectively with C2, C3, and C4. Issue: 01/2017 This supplement is in conjunction with certificate #L17-45 Page 3 of 3
ペリージョンソンラボラトリーアクレディテーションインク 認定証 ペリージョンソンラボラトリーアクレディテーションインクは 下記の試験所を審査しました 横浜ゴム株式会社タイヤ試験部試験 1 試験 2 グループ : 254-8601 神奈川県平塚市追分 2-1 ここに本組織が 以下の認知された国際規格に基づき 認定されたことを証します ISO/IEC 17025:2005 本認定により 以下の範囲及び試験所品質マネジメントシステムの運営における技術的能力を実証するものとします (2009 年 1 月発行 ISO-ILAC-IAF 共同コミュニケに準ずる ) タイヤの表示要件 寸法要件 荷重 / 速度性能試験 フォース法による転がり抵抗測定試験 ( 詳細は付属書に記述 ) 上記試験及び / 又は校正サービスに対する認定資格は本認定証内で言及された住所のみを対象とする 本認定は 上記規格の認定を管理するシステム規定に従い授与され 組織はその規定を遵守し 認定機関の任務を尊重することをここに誓約する PJLA トレーシーサーツェンプレジデント / オペレーションマネージャー Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver Rd., Suite 1325 Troy, Michigan 48084 初回認定日 発行日 認定証有効期限 2012 年 3 月 31 日 2017 年 1 月 26 日 2019 年 2 月 28 日 認定番号 認定証番号 70874 L17-45 この認定証の有効性は 持続された認定に基づく継続審査を通して維持されています PJLA ウェブサイト (www.pjlabs.com) でご確認いただけます 尚 本認定証は日本語翻訳版であり 英文の認定証を正式のものとする 1/2 頁
認定証付属書 横浜ゴム株式会社タイヤ試験部 1) 試験 1 試験 2 グループ : 254-8601 神奈川県平塚市追分 2-1 大塚好秋 Tel: 0463-35-9609 本認定を 上記組織の実施する下記試験について授与する 試験分野 試験された 品目 材料 製品 試験の内容または 測定された属性 適用された仕様 規格に規定された方法 定量下限値 機械的 F (PC) 小型トラック用タイヤ (LT) トラック バス用タイヤ (TB) 表示要件の確認 寸法測定 または手法 Council Directive 92/23/EEC UN/ECE Regulation No.30 UN/ECE Regulation No.54 に基づく タイヤ表示検査 _ 寸法測定作業手順 (PD-02-108/109/110/111/112/113/114) 溝深さ (Groove depth) 11.1 mm 以上 * TWI 1.65 ~ 2.15 mm 外径公的要求公差最小 +0.4% 公的要求公差最大 -0.4% 総幅公的要求公差最小 +0.4% 公的要求公差最大 -0.4% (PC) 荷重 / 速度性能試験 ( ランフラットタイヤ試験を除く ) Council Directive 92/23/EEC UN/ECE Regulation No.30 に基づく 荷重 / 速度性能試験作業手順 (PD-02-108/111/114) 走行前後外径差 ±3.1 % 小型トラック用タイヤ (LT) トラック バス用タイヤ (TB) 荷重 / 速度性能試験 UN/ECE Regulation No.54 に基づく 荷重 / 速度性能試験作業手順 (PD-02-109/110/112/113) 走行前後外径差 ±3.1 % (C1) 小型トラック用タイヤ (C2) トラック バス用タイヤ (C3) フォース法による転がり抵抗測定試験 UN/ECE Regulation No.117 EC Regulation No.1222 ISO28580 及び韓国エネルギー消費効率等級基準に基づく 転がり抵抗タイヤ認定試験作業手順 (PD- 04-293/300) C1 C2 タイヤ RRC 1.0 N/kN C3 タイヤ RRC 0.2 N/kN * TWI 0.6mm は トレッド溝の深さが 1.6mm( 公差 +0.6/-0mm) まで減少した時に適用できるものである * の場合 C1 を C2 C2 を C3 C3 を C4 と読み代える * 上付き文字 F は 試験所が固定された位置で示されたパラメータの試験を実行することを意味している ( 例 : Outside Micrometer F は 試験所が固定された位置でこの試験を行うことを明確にしている ) 2017 年 1 月発行本付属書は 認定証番号 L17-45 の認定証を補足するものである 2/2 頁