Contents Warnings Precautions Precautions for use Operating procedure Torque set Specifications Option 3 4 Warnings Precautions Don't use this d
|
|
|
- あいり たもん
- 5 years ago
- Views:
Transcription
1 7 仕様 Specifications RTD型 RTDCN RTD30CN RTD0CN RTD0CN RTD0CN RTD00CN 目盛 (M.8) M(M.) (M.8)M M.,M3 (M.)M. (M3.) M3(M3.) (.) M,M (.) RTD0CN 00CNのみプレセッ トフックスパナ RTD0CN 0CNのみ樹脂 オレンジ色.For RTD0CN,00CN,preset hook spanner is supplied as standard sccessory..for RTD0CN,0CN,orange-colored resin grip is supplied as standard accessory. 3.Standard bit,. HEX is available. LTD型 LTDCN LTD30CN LTD0CN LTD0CN LTD0CN LTD00CN LTD0CN 目盛 (M.8) (M.8)M M(M.) (M.)M. M.,M3 M3(M3.) (M3.) (.) (.) M,M M M LTD0CN 000CNのみプレセッ ト用フックスパナ は補助締具が付属しています LTD00CN 0CNは別売で補助締具があります は専用ビッ トになります LTD0CN 0CNのみ樹脂 灰色 LTD0CN 000CNにはロッカがありません.For LTD0CN 000CN, preset hook spanner is supplied as standard accessory..for LTD0CN,0CN,gray-colored resin grip is supplied as standard accessory. 3.For,auxiliary tightening tool is supplied as standard accessory. 4.For LTD00CN,0CN,optional auxiliary tightening tool is available..s for are supplied from only Tohnichi..For LTD0CN 000CN,there is no locker attached. 7.Standard bit,. HEX is available,except for. AMLDCN AMLDCN AMLD4CN AMLD8CN BMLDCN BMLD30CN 目盛 SMALL SCREW M (M.)M. (M.8) M(M.) TAPPING SCREW M (M.)M. (M.8)M 83 補助締具 ADJUSTING TOOL TIGHTNING TOOL FOR LTD RTD,LTD型のゼロ調整に使用します This tool is used to adjust the torque of the RTD and LTD torque drivers. 大型LTD型の締め付けを容易にします This tool makes tightening with the large LTD tool much easier 付属品 ACCESSORY BIT # RTDCN 30CN/LTD RTD0CN/LTD RTD0CN/LTD RTD0CN/LTD RTD00CN/LTD LTD0CN 東日トルクドライバ RTD LTD MLD型 TOHNICHI TORQUE DRIVERS RTD LTD MLD SERIES RTD00CN/LTD/NTD/RNTD, FTD400CN LTD0CN/NTD, FTD8N, N 取扱説明書 OPERATING INSTRUCTION トルクドライバテスタ TORQUE DRIVER TESTER RTD型 トルクドライバの検査 調整に使用します This tester is used for torque driver calibration. RTD0CN樹脂付き RTD0CN with Resin ) PRESET HOOK SPANNER FOR RTD/LTD 中 大型RTD LTD型のトルクセットを容易にします This tool makes it easier to set the torque for mid to large capacity RTD and LTD drivers. 3 4 RTD0CN/LTD RTD00CN/LTD LTD0CN トルク測定範囲 cn m MIN MAX LTD型 digit TDT0CN TDT00CN 0 00 樹脂は脱着可能です The resin grip is able to desorb and replace. LTD Model LTD0CN樹脂付き LTD0CN with Resin ) トルクドライバ用樹脂ハンドル RESINE HANDLE FOR TORQUE DRIVER 本社 TEL 代表 FAX 東京都大田区大森北-- Standard Color オプション色 Option Color カタログNo Catalog No. RTD0CN LTD0CN RTD0CN LTD0CN 東京営業所 TEL FAX 東京都大田区大森北-- sales@tohnichi.co.jp オレンジ/灰/黒/緑/赤/青 ORANGE/GRAY/BLACK/GREEN/RED/BLUE オレンジ/灰 ORANGE/GRAY 80/8/8/83/84/8 8/87 刃先厚 幅 thickness width 大阪営業所 TEL FAX 大阪市北区本庄東-- トルクセ ンター大阪 名古屋営業所 TEL FAX 愛知郡長久手町砂子70 トルクセン ター名古屋 広島営業所 TEL FAX 広島市南区南蟹屋-- 九州出張所 TEL FAX 北九州市小倉北区浅野--39 小倉 興産4号館03号 BMLDのビッ トは別売です.s for AMLD are supplied from only Tohnichi..Standard bit,. HEX is available for BMLD. TOHNICHI MFG.CO.,LTD. TEL FAX ,Omori-Kita,-Chome Ota-ku,Tokyo JAPAN overseas@tohnichi.co.jp WebSite: 樹脂は脱着可能です The resin grip is able to desorb and replace. AMLD BMLD型 AMLD/BMLD Model TOHNICHI AMERICA CORP. TEL.(847)7-80 FAX.(847) Academy Drive,Northbrook,Illinois 00,U.S.A. inquire@tohnichi.com WebSite: トルクのことならお気軽に ご相談ください トルクのことならフリーダイヤル URL AMLD N.V.TOHNICHI EUROPE S.A. TEL.3--0 FAX Industrieweg 7 Boortmeerbeek,B-390 BELGIUM tohnichi-europe@online.be 0.04.D RTD Model RTD LTD用プレセットフックスパナ 標準色 RTD LTD用 調整工具 Model 六角二面幅最大値 Width Across Flat Max 六角対角 最大幅 Width Across Corner Max 長さ Length ドライバ取り付け時 Overall Length AMLD/BMLD型 注 関連製品のご紹介 トルクドライバオプション 専用工具 Option BMLD お客様へ 本トルク機器をお使いいただく前に 本 取扱説明書を必ず熟読して下さい ご不 明な点は 販売店又は東日製作所までご 連絡下さい なお 本取扱説明書は大切 に保管して下さい To the user In order to use the torque driver properly and safely please read this instruction manual before operation.if there are any questions,please contact a Tohnichi authorized distributor or Tohnichi sales office.keep these Operating Instructions for future use.
2 Contents Warnings Precautions Precautions for use Operating procedure Torque set Specifications Option 3 4 Warnings Precautions Don't use this driver except for tightening purposes. This is a torque drivers for screw tightening only. Don't use this driver for loosening. Excessive torque may be applied while loosening,which will cause damage to the torque driver and could result in an accident or injury. Make sure there is no oil,or grease on the grip. A slip of the hand while tightening, may cause an accident or injury. Check for cracks,scratches and rust. These will cause damage to the driver and may result in an injury.if such conditions exist,have a functional test performed and repair if necessary. When you use this driver in a high location, prepare to prevent dropping the drivers. If you drop the torque driver or bit,that may cause a serious accident or injury. Don't use the torque driver beyond the maximum torque setting. This will cause damage or injury. Don't use the torque driver if it is missing a pin,etc. Ask a repair shop or our company to inspect the torque driver and repair it before using.
3 3 4 Don't modify the torque drivers. Modifications will weaken the torque drivers.this may cause errors in accuracy, as well as, cause an accident or injury. Don't drop the torque drivers or apply a strong shock or jolt. This will cause damage or deformation as well as decrease the accuracy and durability,which may cause an accident or injury. Use only parts designated by Tohnichi for repair of the torque drivers. Ask the place of purchase or our company for assistance when you repair,and use only Tohnichi parts. 3 Precautions for use Make sure the torque drivers is set correctly before using. The torque is set on the minimum scale for shipment. Use the wrench within the scale range. Do not set torque below minimum scale torque. Confirm that the torque is set according to the correct unit of measure before using. Don't lock,by using pliers. The lock mechanism will be damaged and will not maintain torque accuracy. Don't use torque driver in fresh water or sea water. Don't turn the main scale with releasing the locker. Stop tightening when you feel a click. Applying more torque beyond the click will lead to overtorquing. Perform regular inspections for function and accuracy. Periodical inspections are essential to insure the torque wrench is in optimal condition thus preventing injury.
4 9 0 Remove any dirt such as dust, mud, oil and water, etc. after each use and before storing torque drivers. When storing the torque drivers for a long time,set at the minimum torque,apply rustproof oil,and keep in a dry place. If improperly stored,the accuracy and durability will decrease rapidly. 4 Operating Instructions RTD LTD MLD Series Turn clockwise to release lock. Hold the knurled part of the main scale and turn the handle until the desired torque is reached. (Fig.) How to set the torque Turn the handle until the edge of the minor scale is lined up with the torque line of the major scale. Set vertical torque line of the minor scale to vertical line of the major scale For LTD0CN, 000CN, use the attached spanner for easy torque setting. (Fig.) (Hook spanner for RTD00CN/LTD is option.) After the torque setting,turn counter-clockwise for locking. Insert the bit into the adapter. Push the bit until the ball in the adapter stays in the center of bit groove. For the AMLD/00LTD,push up the coupler and insert the bit. (Fig.3) Start tightening operation. RTD model slips when set torque reaches. Fig. Fig. Fig.3 q e w r 3
5 Torque Set qfigure 4 shows the setting of cn m (major scale points, minor scale points 0). Minor scale has cn m of one graduation, and moves 0cN m in one rotation. Making one rotation clockwise sets 0cN m. Making one rotation counterclockwise sets 80cN m. wfrom the setting of cn m, turning the minor scale clockwise to the scale marking of sets 0cN m. (Fig.) efrom the setting of cn m, turning the minor scale counterclockwise to the scale marking of 8 sets 98cN m (Fig.) Fig Fig. Fig
6 7 仕様 Specifications RTD型 RTDCN RTD30CN RTD0CN RTD0CN RTD0CN RTD00CN 目盛 (M.8) M(M.) (M.8)M M.,M3 (M.)M. (M3.) M3(M3.) (.) M,M (.) RTD0CN 00CNのみプレセッ トフックスパナ RTD0CN 0CNのみ樹脂 オレンジ色.For RTD0CN,00CN,preset hook spanner is supplied as standard sccessory..for RTD0CN,0CN,orange-colored resin grip is supplied as standard accessory. 3.Standard bit,. HEX is available. LTD型 LTDCN LTD30CN LTD0CN LTD0CN LTD0CN LTD00CN LTD0CN 目盛 (M.8) (M.8)M M(M.) (M.)M. M.,M3 M3(M3.) (M3.) (.) (.) M,M M M LTD0CN 000CNのみプレセッ ト用フックスパナ は補助締具が付属しています LTD00CN 0CNは別売で補助締具があります は専用ビッ トになります LTD0CN 0CNのみ樹脂 灰色 LTD0CN 000CNにはロッカがありません.For LTD0CN 000CN, preset hook spanner is supplied as standard accessory..for LTD0CN,0CN,gray-colored resin grip is supplied as standard accessory. 3.For,auxiliary tightening tool is supplied as standard accessory. 4.For LTD00CN,0CN,optional auxiliary tightening tool is available..s for are supplied from only Tohnichi..For LTD0CN 000CN,there is no locker attached. 7.Standard bit,. HEX is available,except for. AMLDCN AMLDCN AMLD4CN AMLD8CN BMLDCN BMLD30CN 目盛 SMALL SCREW M (M.)M. (M.8) M(M.) TAPPING SCREW M (M.)M. (M.8)M 83 補助締具 ADJUSTING TOOL TIGHTNING TOOL FOR LTD RTD,LTD型のゼロ調整に使用します This tool is used to adjust the torque of the RTD and LTD torque drivers. 大型LTD型の締め付けを容易にします This tool makes tightening with the large LTD tool much easier 付属品 ACCESSORY BIT # RTDCN 30CN/LTD RTD0CN/LTD RTD0CN/LTD RTD0CN/LTD RTD00CN/LTD LTD0CN 東日トルクドライバ RTD LTD MLD型 TOHNICHI TORQUE DRIVERS RTD LTD MLD SERIES RTD00CN/LTD/NTD/RNTD, FTD400CN LTD0CN/NTD, FTD8N, N 取扱説明書 OPERATING INSTRUCTION トルクドライバテスタ TORQUE DRIVER TESTER RTD型 トルクドライバの検査 調整に使用します This tester is used for torque driver calibration. RTD0CN樹脂付き RTD0CN with Resin ) PRESET HOOK SPANNER FOR RTD/LTD 中 大型RTD LTD型のトルクセットを容易にします This tool makes it easier to set the torque for mid to large capacity RTD and LTD drivers. 3 4 RTD0CN/LTD RTD00CN/LTD LTD0CN トルク測定範囲 cn m MIN MAX LTD型 digit TDT0CN TDT00CN 0 00 樹脂は脱着可能です The resin grip is able to desorb and replace. LTD Model LTD0CN樹脂付き LTD0CN with Resin ) トルクドライバ用樹脂ハンドル RESINE HANDLE FOR TORQUE DRIVER 本社 TEL 代表 FAX 東京都大田区大森北-- Standard Color オプション色 Option Color カタログNo Catalog No. RTD0CN LTD0CN RTD0CN LTD0CN 東京営業所 TEL FAX 東京都大田区大森北-- sales@tohnichi.co.jp オレンジ/灰/黒/緑/赤/青 ORANGE/GRAY/BLACK/GREEN/RED/BLUE オレンジ/灰 ORANGE/GRAY 80/8/8/83/84/8 8/87 刃先厚 幅 thickness width 大阪営業所 TEL FAX 大阪市北区本庄東-- トルクセ ンター大阪 名古屋営業所 TEL FAX 愛知郡長久手町砂子70 トルクセン ター名古屋 広島営業所 TEL FAX 広島市南区南蟹屋-- 九州出張所 TEL FAX 北九州市小倉北区浅野--39 小倉 興産4号館03号 BMLDのビッ トは別売です.s for AMLD are supplied from only Tohnichi..Standard bit,. HEX is available for BMLD. TOHNICHI MFG.CO.,LTD. TEL FAX ,Omori-Kita,-Chome Ota-ku,Tokyo JAPAN overseas@tohnichi.co.jp WebSite: 樹脂は脱着可能です The resin grip is able to desorb and replace. AMLD BMLD型 AMLD/BMLD Model TOHNICHI AMERICA CORP. TEL.(847)7-80 FAX.(847) Academy Drive,Northbrook,Illinois 00,U.S.A. inquire@tohnichi.com WebSite: トルクのことならお気軽に ご相談ください トルクのことならフリーダイヤル URL AMLD N.V.TOHNICHI EUROPE S.A. TEL.3--0 FAX Industrieweg 7 Boortmeerbeek,B-390 BELGIUM tohnichi-europe@online.be 0.04.D RTD Model RTD LTD用プレセットフックスパナ 標準色 RTD LTD用 調整工具 Model 六角二面幅最大値 Width Across Flat Max 六角対角 最大幅 Width Across Corner Max 長さ Length ドライバ取り付け時 Overall Length AMLD/BMLD型 注 関連製品のご紹介 トルクドライバオプション 専用工具 Option BMLD お客様へ 本トルク機器をお使いいただく前に 本 取扱説明書を必ず熟読して下さい ご不 明な点は 販売店又は東日製作所までご 連絡下さい なお 本取扱説明書は大切 に保管して下さい To the user In order to use the torque driver properly and safely please read this instruction manual before operation.if there are any questions,please contact a Tohnichi authorized distributor or Tohnichi sales office.keep these Operating Instructions for future use.
7 7 仕様 Specifications RTD型 RTDCN RTD30CN RTD0CN RTD0CN RTD0CN RTD00CN 目盛 (M.8) M(M.) (M.8)M M.,M3 (M.)M. (M3.) M3(M3.) (.) M,M (.) RTD0CN 00CNのみプレセッ トフックスパナ RTD0CN 0CNのみ樹脂 オレンジ色.For RTD0CN,00CN,preset hook spanner is supplied as standard sccessory..for RTD0CN,0CN,orange-colored resin grip is supplied as standard accessory. 3.Standard bit,. HEX is available. LTD型 LTDCN LTD30CN LTD0CN LTD0CN LTD0CN LTD00CN LTD0CN 目盛 (M.8) (M.8)M M(M.) (M.)M. M.,M3 M3(M3.) (M3.) (.) (.) M,M M M LTD0CN 000CNのみプレセッ ト用フックスパナ は補助締具が付属しています LTD00CN 0CNは別売で補助締具があります は専用ビッ トになります LTD0CN 0CNのみ樹脂 灰色 LTD0CN 000CNにはロッカがありません.For LTD0CN 000CN, preset hook spanner is supplied as standard accessory..for LTD0CN,0CN,gray-colored resin grip is supplied as standard accessory. 3.For,auxiliary tightening tool is supplied as standard accessory. 4.For LTD00CN,0CN,optional auxiliary tightening tool is available..s for are supplied from only Tohnichi..For LTD0CN 000CN,there is no locker attached. 7.Standard bit,. HEX is available,except for. AMLDCN AMLDCN AMLD4CN AMLD8CN BMLDCN BMLD30CN 目盛 SMALL SCREW M (M.)M. (M.8) M(M.) TAPPING SCREW M (M.)M. (M.8)M 83 補助締具 ADJUSTING TOOL TIGHTNING TOOL FOR LTD RTD,LTD型のゼロ調整に使用します This tool is used to adjust the torque of the RTD and LTD torque drivers. 大型LTD型の締め付けを容易にします This tool makes tightening with the large LTD tool much easier 付属品 ACCESSORY BIT # RTDCN 30CN/LTD RTD0CN/LTD RTD0CN/LTD RTD0CN/LTD RTD00CN/LTD LTD0CN 東日トルクドライバ RTD LTD MLD型 TOHNICHI TORQUE DRIVERS RTD LTD MLD SERIES RTD00CN/LTD/NTD/RNTD, FTD400CN LTD0CN/NTD, FTD8N, N 取扱説明書 OPERATING INSTRUCTION トルクドライバテスタ TORQUE DRIVER TESTER RTD型 トルクドライバの検査 調整に使用します This tester is used for torque driver calibration. RTD0CN樹脂付き RTD0CN with Resin ) PRESET HOOK SPANNER FOR RTD/LTD 中 大型RTD LTD型のトルクセットを容易にします This tool makes it easier to set the torque for mid to large capacity RTD and LTD drivers. 3 4 RTD0CN/LTD RTD00CN/LTD LTD0CN トルク測定範囲 cn m MIN MAX LTD型 digit TDT0CN TDT00CN 0 00 樹脂は脱着可能です The resin grip is able to desorb and replace. LTD Model LTD0CN樹脂付き LTD0CN with Resin ) トルクドライバ用樹脂ハンドル RESINE HANDLE FOR TORQUE DRIVER 本社 TEL 代表 FAX 東京都大田区大森北-- Standard Color オプション色 Option Color カタログNo Catalog No. RTD0CN LTD0CN RTD0CN LTD0CN 東京営業所 TEL FAX 東京都大田区大森北-- sales@tohnichi.co.jp オレンジ/灰/黒/緑/赤/青 ORANGE/GRAY/BLACK/GREEN/RED/BLUE オレンジ/灰 ORANGE/GRAY 80/8/8/83/84/8 8/87 刃先厚 幅 thickness width 大阪営業所 TEL FAX 大阪市北区本庄東-- トルクセ ンター大阪 名古屋営業所 TEL FAX 愛知郡長久手町砂子70 トルクセン ター名古屋 広島営業所 TEL FAX 広島市南区南蟹屋-- 九州出張所 TEL FAX 北九州市小倉北区浅野--39 小倉 興産4号館03号 BMLDのビッ トは別売です.s for AMLD are supplied from only Tohnichi..Standard bit,. HEX is available for BMLD. TOHNICHI MFG.CO.,LTD. TEL FAX ,Omori-Kita,-Chome Ota-ku,Tokyo JAPAN overseas@tohnichi.co.jp WebSite: 樹脂は脱着可能です The resin grip is able to desorb and replace. AMLD BMLD型 AMLD/BMLD Model TOHNICHI AMERICA CORP. TEL.(847)7-80 FAX.(847) Academy Drive,Northbrook,Illinois 00,U.S.A. inquire@tohnichi.com WebSite: トルクのことならお気軽に ご相談ください トルクのことならフリーダイヤル URL AMLD N.V.TOHNICHI EUROPE S.A. TEL.3--0 FAX Industrieweg 7 Boortmeerbeek,B-390 BELGIUM tohnichi-europe@online.be 0.04.D RTD Model RTD LTD用プレセットフックスパナ 標準色 RTD LTD用 調整工具 Model 六角二面幅最大値 Width Across Flat Max 六角対角 最大幅 Width Across Corner Max 長さ Length ドライバ取り付け時 Overall Length AMLD/BMLD型 注 関連製品のご紹介 トルクドライバオプション 専用工具 Option BMLD お客様へ 本トルク機器をお使いいただく前に 本 取扱説明書を必ず熟読して下さい ご不 明な点は 販売店又は東日製作所までご 連絡下さい なお 本取扱説明書は大切 に保管して下さい To the user In order to use the torque driver properly and safely please read this instruction manual before operation.if there are any questions,please contact a Tohnichi authorized distributor or Tohnichi sales office.keep these Operating Instructions for future use.
8 7 仕様 Specifications RTD型 RTDCN RTD30CN RTD0CN RTD0CN RTD0CN RTD00CN 目盛 (M.8) M(M.) (M.8)M M.,M3 (M.)M. (M3.) M3(M3.) (.) M,M (.) RTD0CN 00CNのみプレセッ トフックスパナ RTD0CN 0CNのみ樹脂 オレンジ色.For RTD0CN,00CN,preset hook spanner is supplied as standard sccessory..for RTD0CN,0CN,orange-colored resin grip is supplied as standard accessory. 3.Standard bit,. HEX is available. LTD型 LTDCN LTD30CN LTD0CN LTD0CN LTD0CN LTD00CN LTD0CN 目盛 (M.8) (M.8)M M(M.) (M.)M. M.,M3 M3(M3.) (M3.) (.) (.) M,M M M LTD0CN 000CNのみプレセッ ト用フックスパナ は補助締具が付属しています LTD00CN 0CNは別売で補助締具があります は専用ビッ トになります LTD0CN 0CNのみ樹脂 灰色 LTD0CN 000CNにはロッカがありません.For LTD0CN 000CN, preset hook spanner is supplied as standard accessory..for LTD0CN,0CN,gray-colored resin grip is supplied as standard accessory. 3.For,auxiliary tightening tool is supplied as standard accessory. 4.For LTD00CN,0CN,optional auxiliary tightening tool is available..s for are supplied from only Tohnichi..For LTD0CN 000CN,there is no locker attached. 7.Standard bit,. HEX is available,except for. AMLDCN AMLDCN AMLD4CN AMLD8CN BMLDCN BMLD30CN 目盛 SMALL SCREW M (M.)M. (M.8) M(M.) TAPPING SCREW M (M.)M. (M.8)M 83 補助締具 ADJUSTING TOOL TIGHTNING TOOL FOR LTD RTD,LTD型のゼロ調整に使用します This tool is used to adjust the torque of the RTD and LTD torque drivers. 大型LTD型の締め付けを容易にします This tool makes tightening with the large LTD tool much easier 付属品 ACCESSORY BIT # RTDCN 30CN/LTD RTD0CN/LTD RTD0CN/LTD RTD0CN/LTD RTD00CN/LTD LTD0CN 東日トルクドライバ RTD LTD MLD型 TOHNICHI TORQUE DRIVERS RTD LTD MLD SERIES RTD00CN/LTD/NTD/RNTD, FTD400CN LTD0CN/NTD, FTD8N, N 取扱説明書 OPERATING INSTRUCTION トルクドライバテスタ TORQUE DRIVER TESTER RTD型 トルクドライバの検査 調整に使用します This tester is used for torque driver calibration. RTD0CN樹脂付き RTD0CN with Resin ) PRESET HOOK SPANNER FOR RTD/LTD 中 大型RTD LTD型のトルクセットを容易にします This tool makes it easier to set the torque for mid to large capacity RTD and LTD drivers. 3 4 RTD0CN/LTD RTD00CN/LTD LTD0CN トルク測定範囲 cn m MIN MAX LTD型 digit TDT0CN TDT00CN 0 00 樹脂は脱着可能です The resin grip is able to desorb and replace. LTD Model LTD0CN樹脂付き LTD0CN with Resin ) トルクドライバ用樹脂ハンドル RESINE HANDLE FOR TORQUE DRIVER 本社 TEL 代表 FAX 東京都大田区大森北-- Standard Color オプション色 Option Color カタログNo Catalog No. RTD0CN LTD0CN RTD0CN LTD0CN 東京営業所 TEL FAX 東京都大田区大森北-- sales@tohnichi.co.jp オレンジ/灰/黒/緑/赤/青 ORANGE/GRAY/BLACK/GREEN/RED/BLUE オレンジ/灰 ORANGE/GRAY 80/8/8/83/84/8 8/87 刃先厚 幅 thickness width 大阪営業所 TEL FAX 大阪市北区本庄東-- トルクセ ンター大阪 名古屋営業所 TEL FAX 愛知郡長久手町砂子70 トルクセン ター名古屋 広島営業所 TEL FAX 広島市南区南蟹屋-- 九州出張所 TEL FAX 北九州市小倉北区浅野--39 小倉 興産4号館03号 BMLDのビッ トは別売です.s for AMLD are supplied from only Tohnichi..Standard bit,. HEX is available for BMLD. TOHNICHI MFG.CO.,LTD. TEL FAX ,Omori-Kita,-Chome Ota-ku,Tokyo JAPAN overseas@tohnichi.co.jp WebSite: 樹脂は脱着可能です The resin grip is able to desorb and replace. AMLD BMLD型 AMLD/BMLD Model TOHNICHI AMERICA CORP. TEL.(847)7-80 FAX.(847) Academy Drive,Northbrook,Illinois 00,U.S.A. inquire@tohnichi.com WebSite: トルクのことならお気軽に ご相談ください トルクのことならフリーダイヤル URL AMLD N.V.TOHNICHI EUROPE S.A. TEL.3--0 FAX Industrieweg 7 Boortmeerbeek,B-390 BELGIUM tohnichi-europe@online.be 0.04.D RTD Model RTD LTD用プレセットフックスパナ 標準色 RTD LTD用 調整工具 Model 六角二面幅最大値 Width Across Flat Max 六角対角 最大幅 Width Across Corner Max 長さ Length ドライバ取り付け時 Overall Length AMLD/BMLD型 注 関連製品のご紹介 トルクドライバオプション 専用工具 Option BMLD お客様へ 本トルク機器をお使いいただく前に 本 取扱説明書を必ず熟読して下さい ご不 明な点は 販売店又は東日製作所までご 連絡下さい なお 本取扱説明書は大切 に保管して下さい To the user In order to use the torque driver properly and safely please read this instruction manual before operation.if there are any questions,please contact a Tohnichi authorized distributor or Tohnichi sales office.keep these Operating Instructions for future use.
9
10
11
12
13
14
Contents 1Warnings 2Precautions 3Precautions for use Operating procedure 5Torque set 6Specifications 7Option 1 Warnings Don't use this driver
OPERATING INSTRUCTION RTD Model LTD Model To the user In order to use the torque driver properly and safely please read this instruction manual before operation.if there are any questions,please contact
OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper
OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before operation.if there are any questions,please contact a Tohnichi
OPERATING INSTRUCTION QL QL5 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any quest
OPERATING INSTRUCTION QL QL5 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any questions, please contact to Tohnichi authorized distributor
OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before oper
OPERATING INSTRUCTION RNTD Model NTD Model To the use r In order to use the torque driver properly and safely,please read the instructions before operation.if there are any questions,please contact a Tohnichi
Contents Warnings Precautions Precautions for use How to use 5 Specifications Warnings Don't use this wrench except for tightening purposes. This is a
QLQL Model QL-MHQL-MHQL Model QLE Model OPERATING INSTRUCTION Contents Warnings Precautions Precautions for use How to use 5 Specifications Warnings Don't use this wrench except for tightening purposes.
Contents Warnings Precautions Precautions for use How to use Interchangeable Head Warnings Don't use this wrench except for tightening purposes. T h i
OPERATING INSTRUCTION CL-MH Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any questions, please contact to Tohnichi authorized distributor
_RTDLS_RNTDLS_修正.indd
東日 LS 式トルクドライバ RTDLS RNTDLS TOHNICHI LS TYPE TORQUE DRIVERS RTDLS RNTDLS カールコート Curled Cable 取扱説明書 OPERATING INSTRUCTION フ ラク Plug ビットは別売りです Dliver bits are optional. カールコート Curled Cable RTDLS120CN リミットスイッチ
1 Contents 1Warnings 1 2Do's and Don'ts 2 3Proper use of torque wrench 3 4How to set the torque 5 5Adjusting tool 5 6Usage 7 7Specifications 89 1 Warn
OPERATING INSTRUCTION QSP3QSP4 Model CSP3CSP4 Model In order to use the torque wrench properly and safely, please read this instructions before operation. If any questions, please contact to Tohnichi authorized
Contents 01Application 1 02Features 1 03Warnings 2 04External View 2 05Specifications 3 06Operating Procedure 4 07How to Apply Force 4 08Count Checker
OPERATING INSTRUCTION ACLS2 Model AC2 Model A Model A100N A180N Contents 01Application 1 02Features 1 03Warnings 2 04External View 2 05Specifications 3 06Operating Procedure 4 07How to Apply Force 4 08Count
00_1512_SLIMLINE_BOOK.indb
PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ "R"Zero Holder 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです Runout accuracy of the cutting edge can b
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHDZ "R" ゼロホルダ 刃先の振れを限りなく ゼロ に調整できる画期的なホルダです ターニングツールTurning Tools for SPEEDIO STシャンーリングチャックMilling Chuck コレットホルダCollet Holder Rゼロホルダ"R" Zero Holder ハイドロチャックHydraulic
indd
東日スリップ式トルクレンチ TOHNICHI BREAK-OVER TORQUE WRENCH NSP100CN X 8 取扱説明書 OPERATING INSTRUCTION お客様へ 本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To the User In order
OPERATING INSTRUCTION AP220N2 1200N2 Model AP2200N2, 4000N2 Model To use this product correctly and safely, please read this manual carefully before u
OPERATING INSTRUCTION AP220N21200N2 Model AP2200N2, 4000N2 Model To use this product correctly and safely, please read this manual carefully before use. If you have any question about the product, contact
トルクゲージ TORQUE GAUGE MODEL ATG BTG(S) 取扱説明書 OPERATING INSTRUCTION お客様へ 本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To the User In order to use the torque gauge
MADE IN Nm 目次 1. 警告 2. 注意 3. 使用上の注意 4. 使用方法 5. 仕様 Contents 1. Warnings 2. Do'sandDon'ts 3. Properuseoftorquewrench 4. Usage 5. Speci
ダイヤル式トルクレンチ DIAL INDICATING TORQUE WRENCH MODEL CDB-S 取扱説明書 OPERATING INSTRUCTION お客様へ本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To the User In order to use
LC304_manual.ai
Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
空転式絶縁トルクドライバ INSULATED TORQUE DRIVER MODEL RTDZ/RNTDZ プリセット形 Adjustable / 単能形 Single Function 取扱説明書 OPERATING INSTRUCTION お客様へ 本トルク機器をお使いいただく前に 本取扱説明書
空転式絶縁トルクドライバ INSULATED TORQUE DRIVER MODEL RTDZ/RNTDZ プリセット形 Adjustable / 単能形 Single Function 取扱説明書 OPERATING INSTRUCTION お客様へ 本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい
fx-9860G Manager PLUS_J
fx-9860g J fx-9860g Manager PLUS http://edu.casio.jp k 1 k III 2 3 1. 2. 4 3. 4. 5 1. 2. 3. 4. 5. 1. 6 7 k 8 k 9 k 10 k 11 k k k 12 k k k 1 2 3 4 5 6 1 2 3 4 5 6 13 k 1 2 3 1 2 3 1 2 3 1 2 3 14 k a j.+-(),m1
WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi
ES-600P Operating Instructions WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing
1 2 3
INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL
2 3
RR-XR330 C Matsushita Electric Industrial Co., Ltd.2001 2 3 4 + - 5 6 1 2 3 2 1-3 + + - 22 +- 7 22 8 9 1 2 1 2 1 2 3 12 4 1 2 5 12 1 1 2 3 1 2 1 2 10 11 1 2 $% 1 1 2 34 2 % 3 % 1 2 1 2 3 1 2 12 13 1 2
I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro
Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard
03-01 Senyouki.pdf
Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder
(1) Precautions in selecting valve type 1) 2) WARNING Use the valve at maximum operating pressure or below. CAUTION Use general mineral oil series hydraulic oil. The valve model No. described in this catalogue
目次 Contents 1. 警告 2. 注意 3. 使用上の注意 4. トルクセットの方法 5. 使用方法 6. 仕様 1.Warnings 2.Do s and Don ts 3.Proper use of torque wrench 4.How to set the torque 5.Usag
両振り用単能型トルクレンチ PRESET TYPE TORQUE WRENCH FOR BOTH DIRECTIONS MODEL BQSP/BCSP 型 取扱説明書 OPERATING INSTRUCTION お客様へ本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To
商品コード型式キャップ d L B L1 D1 Code Model Nut kg BT40 -HDC16A ~ ~ 6 38 ~ HDP , ~ 16.
BT HDC A 高精度コレットホルダ BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミHigh-Precision Collet Holder ドリル加工 リーマ加工 仕上エンドミル加工に最適 Suitable for drilling, reaming and finish endmilling. ターニングツールTurning Tools for
RR-US470 (RQCA1588).indd
RR-US470 Panasonic Corporation 2006 2 3 4 http://www.sense.panasonic.co.jp/ 1 2 3 ( ) ZOOM 5 6 7 8 9 10 4 2 1 3 4 2 3 1 3 11 12 1 4 2 5 3 1 2 13 14 q φ φ 1 2 3 4 3 1 2 3 4 2 3 15 16 1 2 3 [/]p/o 17 1 2
Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test conditions except for t
Review of Seatbelt Anchorage and Dimensions of Test Bench Seat Cushion JASIC Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test
目次 1. 警告 2. 注意 3. 使用上の注意 4. 使用方法 5. 仕様 Contents 1. Warnings 2. Do'sandDon'ts 3. Properuseoftorquewrench 4. Usage 5. Specifications 警告 Warnings ねじの締め付け
ダイヤル式トルクレンチ DIAL INDICATING TORQUE WRENCH MODEL CDB-S 取扱説明書 OPERATING INSTRUCTION お客様へ本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To the User In order to use
% + RP-BC30 BATTERY CHARGER STAND K -! # % $ $ % % # $ $ $ %
i C /RF-ND70R/RF-ND70R 3 4 3 4 5 6 7 % 8 5 6 7 8 9 : ;! # < = > #? @ 9 : ; < = >? @ % + RP-BC30 BATTERY CHARGER STAND K -! % @ # % $ $ % %! @ % # $ $ $ % % % % 3 %! @ % # $ % % % @ $ ! @ % # $ % ^ % ^
2 3
* This device can only be used inside Japan in areas that are covered by subscription cable TV services. Because of differences in broadcast formats and power supply voltages, it cannot be used in overseas
01.eps
444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning
内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H) HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE
B7FY-0351-02 J E J 1 J 1 2 3 2 4 J 3 4 Preface Thank you very much for purchasing the hard disk drive. This hard disk drive provides a IDE interface and can be installed in the 3.5-inch storage bay of
PC_14ZY6_BFT150A_US_ indd
PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any
Microsoft Word - Win-Outlook.docx
Microsoft Office Outlook での設定方法 (IMAP および POP 編 ) How to set up with Microsoft Office Outlook (IMAP and POP) 0. 事前に https://office365.iii.kyushu-u.ac.jp/login からサインインし 以下の手順で自分の基本アドレスをメモしておいてください Sign
32720_MR-03_JSCC_CUP
Before beginning assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R MINI-Z Racer MR-03 Chassis Set ASF.4GHz JSCC CUP Edition Thank you for purchasing the Chassis Set
i5 Catalyst Case Instructions JP
Catalyst iphone iphone iphone ON/OFF O O Touch ID Page 01 iphone O O O O O Page 02 ( ) O OK O O O 30 30 min Page 03 ( ) 30 O iphone iphone iphone iphone iphone iphoneiphone Catalyst ON/OFF iphone iphone
*Ł\”ƒ‚ä(DCH800)
B B B B B B B B B C * This device can only be used inside Japan in areas that are covered by subscription cable TV services. Because of differences in broadcast formats and power supply voltages, it cannot
コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projec
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSDM 高さ調整式ドリル用コレットホルダ Drill Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted by
5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²
The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is es
The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is especially designed for operation of butterfly, plug
;y ;y ;; yy ;y;; yy y;y;y;y ;y; ;; yy ; y Portable CD player Operating Instructions RQT5364-S
;y ;y ;; yy ;y;; yy y;y;y;y ;y; ;; yy ; y Portable CD player Operating Instructions -S + - + - 1 3 K 2 - + H K Ni-Cd A.SHOCK S-XBS HOLD HOLD HOLD HOLD ( 1; 1; 6 VOLUME 5 4 1; A.SHOCK S-XBS RANDOM NOR
FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.
-temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in
Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM
ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ
class SCLE HELICOPTER SUPERCOR W-1W ODY KIT INSTRUCTION MNUL SUPERCOR Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive to SUPERCOR.
WE WESB WENB WESNB 428
KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always
elemmay09.pub
Elementary Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Activity Bank Number Challenge Time:
目次 1. 警告 2. 注意 3. 使用上の注意 4. トルクセットの方法 5. 使用方法 6. 仕様 Contents 1.Warnings 2.Do's and Don'ts 3.Proper use of torque wrench 4.How to set the torque 5.Usag
シグナル式トルクレンチ CLICK TYPE TORQUE WRENCH MODEL PQL PQL4 PCL PCL4 取扱説明書 OPERATING INSTRUCTION お客様へ 本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお 本取扱説明書は大切に保管して下さい To the User In order
TH-42PAS10 TH-37PAS10 TQBA0286
TH-42PAS10 TH-37PAS10 TQBA0286 2 4 8 10 11 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 38 42 44 46 50 51 52 53 54 3 4 5 6 7 8 3 4 1 2 9 5 6 1 4 2 3 5 6 10 11 1 2 3 4 12 13 14 TH-42PAS10 TH-42PAS10
ÉgÉEÉRÉuÉâï\éÜ
60 class SCLE HELICOPTER TOWCOR H-1SIII ODY KIT INSTRUCTION MNUL TOWCOR 60 Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive
Microsoft Word - PCM TL-Ed.4.4(特定電気用品適合性検査申込のご案内)
(2017.04 29 36 234 9 1 1. (1) 3 (2) 9 1 2 2. (1) 9 1 1 2 1 2 (2) 1 2 ( PSE-RE-101/205/306/405 2 PSE-RE-201 PSE-RE-301 PSE-RE-401 PSE-RE-302 PSE-RE-202 PSE-RE-303 PSE-RE-402 PSE-RE-203 PSE-RE-304 PSE-RE-403
DZ-GX20/DZ-MV780取扱説明書（上巻）
DZ-GX20 DZ-MV780(S) DZ-MV780(R) DZ-MV780(A) Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use
6 50G5S 3 34 47 56 63 http://toshibadirect.jp/room048/ 74 8 9 3 4 5 6 3446 4755 566 76373 7 37 3 8 8 3 3 74 74 79 8 30 75 0 0 4 4 0 7 63 50 50 3 3 6 3 5 4 4 47 7 48 48 48 48 7 36 48 48 3 36 37 6 3 3 37
6 3 34 50G5 47 56 63 74 8 9 3 4 5 6 3446 4755 566 76373 7 37 3 8 8 3 3 74 74 79 8 30 75 0 0 4 4 0 7 63 50 50 3 3 6 3 5 4 4 47 7 48 48 48 48 7 36 48 48 3 36 37 6 3 3 37 9 00 5 45 3 4 5 5 80 8 8 74 60 39
ユーザーズマニュアル
1 2 3 4 This product (including software) is designed under Japanese domestic specifications and does not conform to overseas standards. NEC *1 will not be held responsible for any consequences resulting
INSTRUCTION MANUAL WARNING Be sure to READ the Instruction Manual. Prior to using, be sure to check whether the machine functions properly. If not, NE
INSTRUCTION MANUAL WARNING Be sure to READ the Instruction Manual. Prior to using, be sure to check whether the machine functions properly. If not, NEVER use it. NEVER apply your fingers to near the front
<31322D899C8CA982D982A95F985F95B65F2E696E6464>
SUMMARY Japan is one of the most earthquakeprone country in the world, and has repeatedly experienced serious major damages. No matter how serious the impact of earthquake disasters, each and every time,
137. Tenancy specific information (a) Amount of deposit paid. (insert amount of deposit paid; in the case of a joint tenancy it should be the total am
13Fast Fair Secure PRESCRIBED INFORMATION RELATING TO TENANCY DEPOSITS* The Letting Protection Service Northern Ireland NOTE: The landlord must supply the tenant with the Prescribed Information regarding
Introduction Purpose This training course describes the configuration and session features of the High-performance Embedded Workshop (HEW), a key tool
Introduction Purpose This training course describes the configuration and session features of the High-performance Embedded Workshop (HEW), a key tool for developing software for embedded systems that
MFS 2B 2.5B 3.5B OB NO NB 3,000
MFS B.5B 3.5B OB NO.00-105-1 0910 NB 3,000 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors.. Please keep the Parts List updated each time when
0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin
注意 Caution 1) AMT-KS を溶接ロボット等に取り付ける際には 必ず溶接機の電源を OFF にし 電気が流れていないことを確認した後 作業を行ってください Keep off of the welding power source during AMT-KS installation w
溶業資 No.012015-L001 溶接ワイヤ用矯正機 Welding wire straightener 取扱説明書 Instruction manual Ver.1.0-1- 注意 Caution 1) AMT-KS を溶接ロボット等に取り付ける際には 必ず溶接機の電源を OFF にし 電気が流れていないことを確認した後 作業を行ってください Keep off of the welding power
2
8 24 32C800037C800042C8000 32 40 45 54 2 3 24 40 10 11 54 4 7 54 30 26 7 9 8 5 6 7 9 8 18 7 7 7 40 10 13 12 24 22 22 8 55 8 8 8 8 1 2 3 18 11 54 54 19 24 30 69 31 40 57 23 23 22 23 22 57 8 9 30 12 12 56
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
untitled
Coaxial shaft type VRS VRB VRL VRT VRS series VRB series VRL series VRT series VRXF VRXF series VRG VRG series ABLE REDUCER ABLE REDUCER Reducer Selection Tool ABLE REDUCERABLE REDUCER ABLE REDUCERABLE
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
取扱説明書_KX-PW100CL
See pages 236 238 for English Guide. KX-PW100CL Ni-MH KX-PW100CL-W KX-FKN100-W 1 2 NTT NTT 1 4 3 4 5 6
429
WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B
2 3 12 13 6 7
2 8 17 42ZH700046ZH700052ZH7000 28 43 54 63 74 89 2 3 12 13 6 7 3 4 11 21 34 63 65 8 17 4 11 4 55 12 12 10 77 56 12 43 43 13 30 43 43 43 43 10 45 14 25 9 23 74 23 19 24 43 8 26 8 9 9 4 8 30 42 82 18 43
2
8 23 26A800032A8000 31 37 42 51 2 3 23 37 10 11 51 4 26 7 28 7 8 7 9 8 5 6 7 9 8 17 7 7 7 37 10 13 12 23 21 21 8 53 8 8 8 8 1 2 3 17 11 51 51 18 23 29 69 30 39 22 22 22 22 21 56 8 9 12 53 12 56 43 35 27
2
8 22 19A800022A8000 30 37 42 49 2 3 22 37 10 11 49 4 24 27 7 49 7 8 7 9 8 5 6 7 9 8 16 7 7 7 37 10 11 20 22 20 20 8 51 8 8 9 17 1 2 3 16 11 49 49 17 22 28 48 29 33 21 21 21 21 20 8 10 9 28 9 53 37 36 25
Z7000操作編_本文.indb
2 8 17 37Z700042Z7000 46Z7000 28 42 52 61 72 87 2 3 12 13 6 7 3 4 11 21 34 61 8 17 4 11 4 53 12 12 10 75 18 12 42 42 13 30 42 42 42 42 10 62 66 44 55 14 25 9 62 65 23 72 23 19 24 42 8 26 8 9 9 4 11 18
5 7 3AS40AS 33 38 45 54 3 4 5 4 9 9 34 5 5 38 6 8 5 8 39 8 78 0 9 0 4 3 6 4 8 3 4 5 9 5 6 44 5 38 55 4 4 4 4 5 33 3 3 43 6 6 5 6 7 3 6 0 8 3 34 37 /78903 4 0 0 4 04 6 06 8 08 /7 AM 9:3 5 05 7 07 AM 9
How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se
2
8 23 32A950S 30 38 43 52 2 3 23 40 10 33 33 11 52 4 52 7 28 26 7 8 8 18 5 6 7 9 8 17 7 7 7 38 10 12 9 23 22 22 8 53 8 8 8 8 1 2 3 17 11 52 52 19 23 29 71 29 41 55 22 22 22 22 22 55 8 18 31 9 9 54 71 44
Huawei G6-L22 QSG-V100R001_02
G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/
H8000操作編
8 26 35 32H800037H800042H8000 49 55 60 72 2 3 4 48 7 72 32 28 7 8 9 5 7 9 22 43 20 8 8 8 8 73 8 13 7 7 7 55 10 49 49 13 37 49 49 49 49 49 49 12 50 11 76 8 24 26 24 24 6 1 2 3 18 42 72 72 20 26 32 80 34
MIDI_IO.book
MIDI I/O t Copyright This guide is copyrighted 2002 by Digidesign, a division of Avid Technology, Inc. (hereafter Digidesign ), with all rights reserved. Under copyright laws, this guide may not be duplicated
取説_KX-PW101CL_PW102CW
See pages 270 and 271 for English Guide. KX-PW101CL KX-PW102CW Ni-Cd F1 F1 F2 F4 F1 F2 F4 F1 F2 F4 2 1 2 Ni-Cd Ni-Cd NTT NTT F1 F1 F1 F1 F1 F1 F1 F1 F4 F4 F4 F1 F4 F1
Microsoft Word - ★(9215) 332_O.doc
No. : 205-03-332 取扱説明書 INSTRUCTION MANUAL 9215Series Sheltap BRANCH CONNECTOR FOR COPPER WIRE O EDN19163 2019/07/16 K. Nakagaki T. Hata T. Michihiro NO EDN/DCN DATE PREPARED by CHECKED by APPROVED by 106-03-003
PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM
PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach
目次 Contents 1. 警告 Warnings 2 2. 注意 Cautions 3 3. 使用上の注意 Proper use of torque wrench 4 4. DOLE 2 組立 分解 Installation/Uninstallation 6 5. トルクセットの方法 How t
上下角ドライブ付プリセット形トルクレンチ CLICK TYPE TORQUE WRENCH WITH DOUBLE MALE SQUARE DRIVES MODEL DQL4 DQL DQLE2 取扱説明書 OPERATING INSTRUCTIONS お客様へ本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい なお
03-01 Senyouki.pdf
WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06
DZ-HS503 取扱説明書
DZ-HS503 Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended accessories only. CAUTION
AN-200A(J-GB).doc :16 AM ページ 2
AN-200A(J-GB).doc 10.5.26 11:16 AM ページ 1 JAPANESE VERSION ENGLISH VERSION AN-200A(J-GB).doc 10.5.26 11:16 AM ページ 2 AN-200A(J-GB).doc 10.5.26 11:16 AM ページ 1 S INTRODUCTION Thank you very much for purchasing
取説_KX-PW38CL_PW48CL
KX-PW38CL KX-PW48CL See pages 260 and 261 for English Guide. 2 3 1 2 NTT NTT Ni-Cd Ni-Cd 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 0 6 1 2 3
206“ƒŁ\”ƒ-fl_“H„¤‰ZŁñ
51 206 51 63 2007 GIS 51 1 60 52 2 60 1 52 3 61 2 52 61 3 58 61 4 58 Summary 63 60 20022005 2004 40km 7,10025 2002 2005 19 3 19 GIS 2005GIS 2006 2002 2004 GIS 52 2062007 1 2004 GIS Fig.1 GIS ESRIArcView
DZ-GX3300/GX3100/GX3100取扱説明書
DZ-GX3300(S)/(B) DZ-GX3200 DZ-GX3100 Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended
/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p
/ Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high
DZ-HS303 取扱説明書
DZ-HS303(S)/(A) Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended accessories
VE-GP32DL_DW_ZA
VE-GP32DL VE-GP32DW 1 2 3 4 5 6 1 2 3 4 1 1 2 3 2 3 1 1 2 2 2006 Copyrights VisionInc. @. _ & $ % + = ^ @. _ & $ % + = ^ D11 D12 D21
03-03 Bush Mentori.pdf
54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1
,,,,., C Java,,.,,.,., ,,.,, i
24 Development of the programming s learning tool for children be derived from maze 1130353 2013 3 1 ,,,,., C Java,,.,,.,., 1 6 1 2.,,.,, i Abstract Development of the programming s learning tool for children
アクアEXオイルホールロング(CC2015).indd
High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge
目次 Contents 1. 警告 Warnings 2 2. 注意 Cautions 3 3. 使用上の注意 Proper use of torque wrench 4 4. トルクセットの方法 How to set the torque 6 5. 使用方法 Usage 7 6. 仕様 Speci
オーバートルク防止ヘッド交換式トルクレンチ Prevention from Over-torque and Interchangeable Head Type Adjustable Torque Wrench MODEL YCL 取扱説明書 OPERATING INSTRUCTIONS お客様へ 本トルク機器をお使いいただく前に 本取扱説明書をよくお読み頂き正しくご使用下さい ご不明な点は 販売店又は東日製作所までご連絡下さい
L1 What Can You Blood Type Tell Us? Part 1 Can you guess/ my blood type? Well,/ you re very serious person/ so/ I think/ your blood type is A. Wow!/ G
L1 What Can You Blood Type Tell Us? Part 1 Can you guess/ my blood type? 当ててみて / 私の血液型を Well,/ you re very serious person/ so/ I think/ your blood type is A. えーと / あなたはとっても真面目な人 / だから / 私は ~ と思います / あなたの血液型は
Agilent 4339B High Resistance Meter Operation Manual
MANUAL SUPPLEMENT 3-2 3-2 Agilent 1 3-2 P/N 16000-99023 Print Date: October 2001 PRINTED IN JAPAN Copyright Agilent Technologies Japan, Ltd. 2001 1-3-2, Murotani, Nishi-ku, Kobe-shi, Hyogo, 651-2241 JAPAN
ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool sys
ーリングチャックMilling Chuck コレットホルダCollet Holder イドロチャックHydraulic Chuck シュリンカーチャックShrink Fit タッピングチャックTapping Chuck アーバー類Arbors マルチボアツーリングMultibore tool system 機能付きホルダFunction Holder プルスタッドRetention Stud シャンク規格Tool