Creating NSR-500 DVD Installer Overview This document describes how to create DVD installer for the NSR-500 series. Applicable Model NSR-500 Series To be required * Windows (XP, Vista or 7) installed PC (*1) * DVD-R drive * Windows Server 2003 Resource Kit Tools (*2) * NSR-500 DVD installer image File name: NSR-500-dvd-iso-[a.b.c-n].zip (*3) * Blank DVD-R or DVD-RW media (*1) The procedures described in this document have been verified with the PCs listed below: Windows XP/SP3, Vista/SP2, 7/SP1 (*2) It s necessary for either of Windows XP or Vista being installed. You can download from following URL. http://www.microsoft.com/downloads/en/details.aspx?familyid=9d467a69-57ff-4ae7-96ee-b18c4790cffd (*3) You can download the latest DVD installer image( Installer for DVD ) from following URL. Installer for DVD (at Software Download ) http://www.sony.net/products/ipela/nsr/nsr500/ 1
Creating NSR-500 DVD Installer Procedures (Windows XP or Vista) 1. Installing Windows Server 2003 Resource Kit Tools to PC 2. Extracting the DVD installer image Extract NSR-500-dvd-iso-[a.b.c-n].zip. After that, you can see vessapp_nsr_target_install_dvd_[yymmdd-n].iso. 3. Invoking the Command Prompt Shell 4. Writing the image to a DVD-R with dvdburn command Set a blank DVD-R media to the drive. Write the ISO image to the media. (Usage: dvdburn [Drive] [ISO file]) 5. Waiting for completion When the writing is completed, the message Burn successful! is displayed, after the burned DVD-R is automatically ejected and then reinserted. With some hard drives, the burned DVD-R is automatically ejected without being reinserted afterward and the message "Error reinserting disc" is displayed. This message, however, can be ignored. The writing is completed. Continue to do system installation with Installation Guide. Though the following message may be displayed with some hard drive, it can be ignored. "Error setting timestamp; this error will be ignored, some drives can work without this." 2
Creating NSR-500 DVD Installer Procedures (Windows 7) 1. Extracting the DVD installer image Extract NSR-500-dvd-iso-[a.b.c-n].zip. After that, you can see vessapp_nsr_target_install_dvd_[yymmdd-n].iso. 2. Invoking Windows Disc Image Burner Right click the.iso file which has been extracted in Step 1. And select Burn disc image. 3
Creating NSR-500 DVD Installer Procedures (Windows 7) 3. Burning the DVD-R Set a blank DVD-R media to the drive, check Verify disc after burning, and then press Burn. 4. Waiting for completion When the message The disc image has been successfully burned to disc is displayed, the writing is finished. Continue to do system installation with Installation Guide. You can download the latest NSR-500 Installation Guide from the following URL. NSR-500 Installation Guide (at Other s/white Paper ) http://www.sony.net/products/ipela/nsr/nsr500/ 4
NSR-500 DVD インストーラー作成手順 概要 NSR-500 の DVD インストーラーを作成する手順を示します 対象モデル NSR-500 シリーズ 準備するもの Windows (XP, Vista, 7) がインストールされた PC ( 注 1) DVD-R を書き込み可能なドライブ Windows Server 2003 Resource Kit Tools ( 注 2) NSR-500 DVD インストーラーイメージファイル名 :NSR-500-dvd-iso-[a.b.c-n].zip ( 注 3) ブランク DVD-R もしくは DVD-RW 1 枚 ( 注 1) 以下の PC で動作確認済みです Windows XP/SP3, Vista/SP2, 7/SP1 ( 注 2)Windows XP あるいは Vista がインストールされている場合のみ必要 下記 URL より入手可能です http://www.microsoft.com/downloads/en/details.aspx?familyid=9d467a69-57ff-4ae7-96ee-b18c4790cffd ( 注 3) 下記 URL より最新版をダウンロードできます Install for DVD (Software Download) http://www.sony.net/products/ipela/nsr/nsr500/ 5
NSR-500 DVD インストーラ作成手順 手順 (Windows XP Vista) 1. PC に Windows Server 2003 Resource Kit Tools をインストールする 2. DVD インストーラーイメージを展開する NSR-500-dvd-iso-[a.b.c-n].zip 圧縮ファイルを展開してください 展開すると vessapp_nsr_target_install_dvd_[yymmdd-n].iso というファイルが作成されます 3. コマンドプロンプトを起動する 4. dvdburn コマンドにより DVD-R に書き込みを行うブランク DVD-R をドライブにセットする dvdburn コマンドを起動し 書き込む ( dvdburn [DVD-R ドライブ ] [ISO ファイル名 ]) 5. 書き込みの完了を待つ 書き込みが完了すると 書き込み済みの DVD-R が自動的にイジェクトされた後 再挿入され Burn successful! と表示されます ただし お使いのドライブによってはイジェクト後再挿入されない場合があります この場合 Error reinserting disc と表示されますが 無視して構いません DVD-R への書き込みは完了です 引き続き インストールガイドを参照しながら インストール作業を実施してください お使いのドライブによっては以下のメッセージが表示されますが 無視して構いません Error setting timestamp; this error will be ignored, some drives can work without this. 6
NSR-500 DVD インストーラー作成手順 手順 (Windows 7) 1. DVD インストーラーイメージを展開する NSR-500-dvd-iso-[a.b.c-n].zip 圧縮ファイルを展開してください 展開すると vessapp_nsr_target_install_dvd_[yymmdd-n].iso というファイルが作成されます 2. Windows ディスクイメージ書き込みツールを起動する手順 1 で展開したファイルのアイコンを右クリックし ディスクイメージの書き込み を選択する 7
NSR-500 DVD インストーラ作成手順 手順 (Windows 7) 3. DVD-R に書き込むブランク DVD-R をドライブにセットする 書き込み後のディスクの確認 をチェックし 書き込み ボタンをクリックする 4. 書き込みの完了を待つ ディスクイメージは正常に書き込まれました と表示されれば DVD-R への書き込みは完了です 引き続き インストールガイドを参照しながら インストール作業を実施してください 最新版のインストールガイドは 以下の URL から入手して下さい NSR-500 Installation Guide (Other s/white Paper) http://www.sony.net/products/ipela/nsr/nsr500/ 8