Options(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet si

AC Fan 6mm sq. San Ace 6 28mm thick, 38mm thick General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) 6 6 28mm Mass:12g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-18 1 5/6 5/4.6/.5.7/.6 2,25/2,7.27/.33 9.5/11.7 11.8/18.6.47/.75 24/26-3 to +7 25, 19-183 115.6/.5 Dimensions(Unit : mm) 6.5 5.3 8-4.3 Mounting Hole 3 28.5 3 +5 3 AIR FLOW 6.5 5.3 Lead Wire AWG26 UL143 1 M4.7 Earth Ground tap Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening(unit : mm) 4-4.5 Inlet side 4-4.5 Outlet side 58 5.3 Wiring diagram C 5.3 FANA 59 5.3 63 5.3 58

Options(Unit : mm) Finger guards Model :19-139E :19-139H 53 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side 4.3.3 4 1 Resin finger guards Model :19-13G 6.5 1 5.3 6.5.5 4 2.5 4 4.3.3 6.5 1 AC Fan 6mm 5.3 9.5.5 64 1 5.3 75 1.5.5 62 7.7 Resin filter kits Model :19-13F13(13PPI),19-13F2(2PPI) :19-13F3(3PPI),19-13F4(4PPI) 64 1 5.3 4 4.3.3 4 1.5 4 2.5 Air Flow and Static Pressure Characteristics.12 3.1.8.6.4.2 2 1 6Hz 1V 5Hz 1V.2.4 5 1 15 Air Flow 19-18 19-183 CFM 6mm

6.5 5.3 4-4.5 AC Fan 6mm sq. General Specifications 6.5 5.3 Rotating Direction 5.3 San Ace 6 Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) 6 6 38mm Mass:17g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-13 1 5/6 6/5 19-133 115.7/.6.7/.6 Dimensions(Unit : mm) Reference dimension of mounting holes and vent opening(unit : mm) Inlet side thick, 38mm thick.8/.7.8/.7 2,6/3,15.33/.4 11.7/14.1 16.3/23.3.65/.94 28/3-3 to +6 25, 8-4.3 38.5 Mounting Hole 3 3 +5 3 AIR FLOW 1 Lead Wire AWG26 UL143 M4.7 Earth Ground tap Air Flow Direction Wiring diagram Outlet side 58 C4-4.5 5.3 28mm FANA 59 5.3 63 5.3 58

8.5 71.5.3 AC Fan 8mm sq. General Specifications 71.5.3 8.5 71.5.3 Rotating Direction 78 San Ace 8 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Lead Wire black, 2pcs Storage Temperature -3 to+7 (Non-condensing) 8 8 2mm Mass:18g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy [V] [Hz] [W] [A] [A] [min -1 ] [m³/min] (CFM] [Pa] [inchh ² O] [db(a)] [ ] [h] 19-21 1 5/6 6/5 19-213 115.6/.5.6/.5 Dimensions(Unit : mm) Lead Wire AWG22 UL143 Reference dimension of mounting holes and vent opening(unit : mm) Inlet side 4-4.5 71.5.3 C FANAthick.7/.6.7/.6 2,5/3,.44/.53 15.5/18.7 23.5/31.4.94/.126 26/31-3 to +6 25, 2.5 8-4.3 3.5 3.5 Mounting Hole M4.7,6mm M4.7 6 deep Earth Ground tap 3L AIR FLOW Air Flow Direction Wiring diagram Outlet side 71.5.3 2mm 4-4.5 78 89.5 71.5.3 78

8.5 AC Fan 8mm sq. General Specifications 71.5.3 71.5.3 78 8.5 71.5.3 Rotating Direction 71.5.3 San Ace 8 3-4.5 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Storage Temperature -3 to+7 (Non-condensing) 8 8 25mm Mass:27g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S5 1.12/.1.13/.11 19S53 115.1 /.8.11/.9 19S51 2.6/.5.6/.5 19S54 23.5/.4.5/.4 5/6 9/7 19S3 1.12/.1.13/.11 19S33 115.1 /.8.11/.9 19S31 2.6/.5.6/.5 19S34 23.5/.4.5/.4 Dimensions(Unit : mm) 6-4.3 25.5 Mounting Hole 3.5 3.5 78 71.5.3 C FANAthick 2,65/3,1.63/.76 22.3/26.9 27.5/38.3.11/.154 3/33 2,35/2,7.55/.63 19.4/22.3 21.6/28.4.87/.114 28/3 28MAX. 26 M4.7,6mm M4.7 6 deep Earth Ground tap AIR FLOW Wiring diagram Outlet side 71.5.3 2mm 3-4.5 Air Flow Direction Reference dimension of mounting holes and vent opening(unit : mm) Inlet side 89.5-3 to +6 25, 78

Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet side 4.3.3 75 5 1 Resin finger guards Model :19-12G 82 1 71.5.3 7.5 4 2.5 4 4.3.3 AC Fan 8mm 15.5 1.5 39.6 88 82 1 71.5.3 Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet side, Outlet side 4.3.3 5 1 85.5 1 71.5.3 1.5.5 4 4.3.3 11 7.5 8.9 17.5 <PS>E JET ORIEX 3A 25V 24 11.5 4 8 18 9.5 2 6 15.5 1.5 88 85.5 1 71.5.3 11.2 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-16-L1/489-16-L 21 4 1.5 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-47-L1/489-47-L21 4 2.5 L 5 Flat 2 2-core vinyl cord VFF.75mm 2 2 Black 1 11 8.9 7.5 17.5 R1 24 8 11.5 4 18 9.5 2 R1.5 R1 6 L 5 1 Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics.2 5.2 5.15.1.5 4 3 2 1 6Hz 1V 5Hz 1V.15.1.5 4 3 2 1 6Hz 1V 5Hz 1V.2.4.6.8 5 1 15 2 25 3 Air Flow 19S5 19S53 19S51 19S54 m 3 /min CFM.25.5.75 1 2 3 Air Flow 19S3 19S33 19S31 19S34 CFM 8mm

8.5 78 AC Fan 8mm sq. General Specifications 71.5.3 8.5 71.5.3 Rotating Direction 71.5.3 89.5 San Ace 8 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame or between lead conductor and frame) Storage Temperature -3 to+7 (Non-condensing) 8 8 38mm Mass:4g Specifications Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-15 1.13/.11.17/.15 19-153 115.11/.1.14/.12 5/6 9/8 19-151 2.7/.6.9/.8 19-154 23.6/.5.8/.7 Dimensions(Unit : mm) 4-4.5 71.5.3 7-4.3 3.5 Mounting Hole Reference dimension of mounting holes and vent opening(unit : mm) Inlet side 78 71.5.3 C FANAthick 2,7/3,15.9/1.5 31.8/37.1 31.4/44.1.126/.177 35/39-3 to +6 25, 38.5 3.5 M4.7,6mm M4.7 6 deep Earth Ground tap AIR FLOW Air Flow Direction Wiring diagram Outlet side 71.5.3 3-4.5 2mm 89.5 78

Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet 吐出側 side 4.3.3 75 5 1 Resin finger guards Model :19-12G 82 1 71.5.3 7.5 4 2.5 4 4.3.3 AC Fan 8mm 15.5 1.5 39.6 88 82 1 71.5.3 Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet side, Outlet side 4.3.3 5 1 85.5 1 71.5.3 1.5.5 4 4.3.3 11 7.5 15.5 1.5 88 85.5 1 71.5.3 11.2 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-16-L1/489-16-L 21 4 1.5 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-47-L1/489-47-L21 4 2.5 8.9 17.5 <PS>E JET ORIEX 3A 25V 24 11.5 4 8 18 9.5 2 6 L 5 Flat 2 2-core vinyl cord VFF.75mm 2 2 Black 1 11 8.9 7.5 17.5 R1 24 8 11.5 4 18 9.5 2 R1.5 R1 6 L 5 1 Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics.2 5.15.1.5 4 3 2 1 6Hz 1V 5Hz 1V.5 1 2 3 4 Air Flow 19-15 19-153 19-151 19-154 1. 1.5 5 CFM 8mm

AC Fan 8mm sq. General Specifications M4.7 6,6mm deep Earth Ground tap 8.5 71.5.3 78 71.5.3 San Ace 8 8-4.3 Mounting Hole Rotating Direction 4-4.5 71.5.3 25mm thick, 38mm thick, 42mm thick Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Storage Temperature -3 to+7 (Non-condensing) 8 8 42mm Mass:41g Specifications represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-4UL 1 19-43UL 115.11/.1.14/.12 1/9 19-41UL 2.7/.6.8/.7 5/6 19-44UL 23.6/.5.7/.6 19-47UL 1 4/3.5 19-33UL 115.4/.4.4/.4 Dimensions(Unit : mm) Reference dimension of mounting holes and vent opening(unit : mm) Inlet side C FANAthick.13/.11.16/.14 2,65/3,1.85/1. 3./35.3 24.5/35.3.98/.142 4/44.5/.5.5/.5 1,5/1,5.43/.43 15.2/15.2 8.8/8.8.35/.35 24/24 8.5 42.5 71.5.3 3 3 Air Flow Direction Wiring diagram Outlet side 71.5.3 4-4.5 2mm 78 89.5 71.5.3-3 to +6 25, 78

Options(Unit : mm) Finger guards Model :19-49C Surface treatment :Nickel-chrome plating (silver) Outlet side 4.3.3 75 5 1 Resin finger guards Model :19-12G 82 1 71.5.3 7.5 4 2.5 4 4.3.3 AC Fan 8mm 15.5 1.5 39.6 88 82 1 71.5.3 Model :19-49E :19-49H 11.2 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Resin filter kits Model :19-12F13(13PPI),19-12F2(2PPI) :19-12F3(3PPI),19-12F4(4PPI) 75 Inlet 吸込側 side,, 吐出側兼用 Outlet side 4.3.3 5 1 85.5 1 71.5.3 1.5.5 4 4.3.3 15.5 1.5 88 85.5 1 71.5.3 11.2 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-8-L1/489-8-L21/489-8-L35 4 1.5 4 2.5 Flat 2 2-core vinyl cord VFF.75mm 22 Black 16.5 6 <PS>E JET ORIEX 3A 25V 1 2 25 5 1 1.5 5.6 L 5 1 Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L 35 3,5 Air Flow and Static Pressure Characteristics.15.1.5 4 3 2 1.2.4 6Hz 1V 5Hz 1V.6.8 1. 1.2 1 2 3 4 Air Flow 19-4UL 19-43UL 19-41UL 19-44UL CFM.6.5.4.3.2.1 16 14 12 1 8 6 4 2 6Hz 1V 5Hz 1V.1.2.3.4.5.6 5 1 15 2 Air Flow 19-47UL 19-33UL CFM 8mm

AC Fan 92mm sq. San Ace 92 25mm thick, 25mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! brown @ black Sensor yellow 92 92 25mm Mass:29g / 31g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S91 1.1 /.9.13/.12 8/7 19S93 115.9/.8.11/.1 2,7/3,1.95/1.1 33.6/38.9 39.2/49..157/.197 35/38 19S92 2 11/1.7/.6.8/.8 19S94 23 1/9.6/.5.7/.7 19S95 1 5/6 8/7.1 /.9.11/.1 2,4/2,8.84/.98 29.7/34.6 31.4/4.2.126/.161 32/35 19S96 1.9/.8.9/.8 7/6 19S193 115.8/.7.8/.7 1,5/1,7.55/.65 19.4/23 12.5/16.3.5/.65 24/27 19S192 2.6/.5.6/.5 8/7 19S194 23.5/.4.5/.4-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S491 1.1 /.9.13/.12 8/7 19S493 115.9/.8.11/.1 2,7/3,1.95/1.1 33.6/38.9 39.2/49..157/.197 35/38 19S492 2 11/1.7/.6.8/.8 5/6 19S494 23 1/9.6/.5.7/.7 19S495 8/7.1 /.9.11/.1 2,4/2,8.84/.98 29.7/34.6 31.4/4.2.126/.161 32/35 1 19S496 7/6.9/.8.9/.8 1,5/1,7.55/.65 19.4/23 12.5/16.3.5/.65 24/27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,

Dimensions(Unit : mm) Standard 92.5 82.5.3 92.5 82.5.3 28MAX. 26 25.5 6-3.7 3.5 3.5 Mounting Hole AIR FLOW Reference dimension of mounting holes and vent opening(unit : mm) Standard M4.7 6,6mm deep Earth Ground tap 82.5.3 82.5.3 Inlet side, 82.5.3 Outlet side 82.5.3 9 9 3 4 3 4 AC Fan 92mm Rotating Direction Air Flow Direction 1.5 92.5 92.5 72 72 1.5 1.5 1.5 3L Sensor-Purpose AWG28 Lead Wire Length UL17 3L 3L AWG28 92.5 UL17 92.5 46 46 26 4-3.7 25.5 26MAX. 26 4-3.7 3.5 3.5 25.5 Mounting Hole 3.5 3.5 M4.7 6 M4.7 6,6mm deep Earth Ground tap AIR FLOW AIR FLOW 116.6.3 116.6.3 Inlet side, Outlet side 9 9 2-4 2-4 Rotating Direction 116.6.5 116.6.5 Air Flow Direction Wiring diagram Standard C FANASensor C with FANA(For fan power supply) Sensor circuit 5V Brown Yellow 4.5V to 5.5V 1mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V Sensor circuit Brown Yellow Black 9.6V to 14.4V 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. 12V Sensor output V 92mm 2 2

AC Fan 92mm sq. San Ace 92 92 92 25mm Mass:29g / 31g() Options(Unit : mm) Finger guards Model :19-99C Surface treatment :Nickel-chrome plating (silver) Outlet side 吐出側 4.3.3 5 1 Resin finger guards Model :19-11G 92 1 82.5.3 7.5 4 2.5 4 4.3.3 1.5.5 12.5 39.8 87 99 92 1 82.5.3 116.6 Model :19-99E :19-99H 12.5.5 1.5 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side 4.3.3 87 99 1 5 91 Resin filter kits Model :19-11F13(13PPI),19-11F2(2PPI) :19-11F3(3PPI),19-11F4(4PPI) 96.5 1 82.5.3 96.5 1 82.5.3 1.5.5 4 4.3.3 116.6 4 9.5.5 4 2.5 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-16-L1/489-16-L21 11 7.5 8.9 17.5 <PS>E JET ORIEX 3A 25V 24 4 8 11.5 18 9.5 2 6 L 2 Flat 2-core vinyl cord VFF.75mm 2 2 Black 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-47-L1/489-47-L21 11 8.9 7.5 17.5 R1 24 8 11.5 4 18 R1.5 9.5 2 R1 6 L 5 1 Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1

.25 6.2 5 4.15 3.1 2.5 1.5 1. 1.5 1 2 3 4 5 92mm AC Fan 92mm Air Flow and Static Pressure Characteristics Standard 6Hz 1V 5Hz 1V.2 5 4.15 3.1 2.5 1 6Hz 1V 5Hz 1V 3.1 2.5 1 6Hz 1V 5Hz 1V 19S91 19S93 19S92 19S94 CFM.5 19S95 1. 1.5 1 2 3 4 5 CFM.5 1 2 3 19S96 19S193 19S192 19S194 1. CFM.25 6.2 5 4.15 3.1 2.5 1 6Hz 1V 5Hz 1V.2 5 4.15 3.1 2.5 1 6Hz 1V 5Hz 1V 3.1 2.5 1 6Hz 1V 5Hz 1V.5 1. 1.5 1 2 3 4 Air Flow 19S491 19S493 19S492 19S494 5 CFM.5 19S495 1. 1.5 1 2 3 4 5 CFM.5 1 2 3 19S496 1. CFM 22

AC Fan 12mm sq. San Ace 12 25mm thick, 25mm thick() 38mm thick, 38mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! brown @ black Sensor yellow 12 12 25mm Mass:37g / 39g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S85 1.16/.14.19/.17 19S84 115.14/.12.16/.15 13.5/12 2,5/2,9 1.92/2.22 67.8/78.4 19S88 2.8/.7.1 /.9 49 /53.9.197/.216 38/41 19S87 23.7/.6.8/.7 19S81 1 5/6.11.11/.1 19S83 115.1.1 /.9 9.5/8.5 19S82 2.7.7/.6 2,2/2,35 1.63/1.78 57.6/62.9 29.4/26.3.118/.16 34/35 19S89 23.6.6/.5 19S86 1 12/1.14/.12.15/.13 1,4/1,6 1.11/1.35 39.2/47.7 15.7/19.6.63/.79 24/27-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S485 1.16/.14.19/.17 19S484 115.14/.12.16/.15 13.5/12 25/29 19S488 2 5/6.8/.7.1 /.9 1.92/2.22 67.8/78.4 48 /52.193/.29 38/41 19S487 23.7/.6.8/.7 19S486 1 12/1.14/.12.15/.13 14/16 1.11/1.35 39.2/47.7 15.7/19.6.59/.75 24/27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,

Dimensions(Unit : mm) Pull-up resistor Inlet side 119.5 26MAX. 26 25.5 14.8.3 14.8.5 3.5 3.5 M4.7, M4.7 6 6mm deep Earth Ground tap AIR FLOW 8-3.7 Mounting Hole Rotating Direction Air Flow Direction Sensor-Purpose Lead Wire 3L 26MAX. Length 26 AWG28 AGW28 8-3.7 25.5 UL17 UL17 Mounting Hole 3.5 3.5 41 Standard M4.7 6,6mm deep Earth Ground tap AIR FLOW 1.5 14.8.3 119.5 Rotating Direction Air Flow Direction Wiring diagram Standard 5V (For fan power supply) Brown 4.5V to 5.5V Yellow 1mA MAX. 27.6V MAX. Black Sensor output V 119.5 14.8.5 119.5 14.8.3 C FANAC FANA79 9.5 9.5 1.5 Sensor circuit Reference dimension of mounting holes and vent opening(unit : mm) 117 Sensor circuit 12V 4-4 14.8.3 Brown Yellow Black Outlet side 115 14.8.3 127 9.6V to 14.4V Sensor output V 4-4 14.8.3 115 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 12mm 12mm

AC Fan 12mm sq. San Ace 12 12 12 25mm Mass:37g / 39g() Model :19-19E 12 12mm * Surface treatment :Nickel-chrome plating (silver) :19-19K 19-19E :Cation electropainting (black) 19-19K Inlet side, Outlet side 5 1 1 5 13 Options(Unit : mm) Finger guards Model :19-19C 12 12mm ** Surface treatment :Nickel-chrome plating (silver) :19-19H 19-19C :Cation electropainting (black) 19-19H Outlet side 4.3.3 152.5.5 42.2 152.5 1.5.5 113 148 113 4.3.3 18.6 13 5 1 13 152.5.5 Resin finger guards 12 12mm * Model :19-1G 19-19E 119 1 19-19K 14.8.3 119 1 124 1 14.8.3 14.8.3 113 4.3.3 18.6 148 5 1 13 Resin filter kits Model :19-1F13(13PPI),19-1F2(2PPI) :19-1F3(3PPI),19-1F4(4PPI) 124 1 14.8.3 7.5 4-2.5 1.5.5 4-4.3.3 4-4.3.3 148 4-11.5 4-2.5 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-16-L1/489-16-L21 11 7.5 8.9 17.5 <PS>E JET ORIEX 3A 25V 24 4 8 11.5 18 9.5 2 6 L Flat 2 2-core vinyl cord VFF.75mm 2 2 Black 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-47-L1/489-47-L21 11 8.9 7.5 17.5 R1 24 8 11.5 4 18 R1.5 9.5 2 R1 6 L 5 1 Model Power cord length(mm) ー L1 1, ー L21 2,1

AC Fan 12mm Air Flow and Static Pressure Characteristics Standard.25 6.2 5 4.15 3.1 2.5 1 6Hz 1V 5Hz 1V.15 3.1 2.5 1 6Hz 1V 5Hz 1V.12 3.1.8 2.6.4 1.2 6Hz 1V 5Hz 1V 1 2 2 4 6 8 CFM 2 4 6 8 1 CFM 2 4 6 8 19S85 19S84 19S88 19S87 1 2 3 19S81 19S83 19S82 19S89 1 19S86 2 CFM.3.25.2.15.1.5 7 6 5 4 3 2 1 6Hz 1V 5Hz 1V.12.1.8.6.4.2 3 2 1 6Hz 1V 5Hz 1V 1 2 3 1 2 2 4 6 8 1 CFM 19S485 19S484 19S488 19S487 2 4 6 8 1 CFM Air Flow 19S486 12mm

AC Fan 12mm sq. San Ace 12 25mm thick, 25mm thick() 38mm thick, 38mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! brown @ black Sensor yellow 12 12 38mm Mass:55g / 58g() Specifications Standard represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S75UL 1.24/.21.32/.28 19S74UL 115.21/.18.27/.24 18/16 19S78UL 2.12/.1.16/.14 2,7/3,1 2.5/2.9 88.3/12.5 57.9/68.7.233/.276 42/45 19S72UL 23.11/.9.14/.13 19S5 19S5UL 1.18/.16.25/.22 19S24 12.16/.14.21/.18 19S24UL 115 14/12 19S8 2.9/.8.13/.11 19S8UL 2,7/3,1 2.35/2.7 83 / 95.4 55.9/65.7.224/.264 4/43 19S25 5/6 23 19S25UL.8/.7.11/.9 19S29UL 14/12.18/.16.23/.21 2,45/2,7 2.15/2.35 76 / 83 44.1/49..177/.197 38/4 19S13 19S13UL 1 13/11.16/.14.16/.15 1,8/2, 1.54/1.72 54.4/ 6.8 24 /27.96/.18 3/32 19S6 7/7.1 /.9.1 /.9 1,65/1,7 1.45/1.5 51.2/ 53 17.6/17.6.71/.71 28/28 19S6UL 115 1/1.13/.11.13/.11 1,8/1,9 1.56/1.64 55 / 57.9 2 /2.6.8/.83 3/31 19S1 2 7/7.5/.4.5/.4 1,65/1,7 1.45/1.5 51.2/ 53 17.6/17.6.71/.71 28/28 19S1UL 24 11/11.6/.5.6/.5 1,8/1,95 1.58/1.68 55.8/ 59.3 2.6/21.6.83/.87 3/32-3 to +6 25, represents low-speed. Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19S45UL 1.18/.16.25/.22 19S424UL 115.16/.14.21/.18 2,7/3,1 2.35/2.7 83/95.4 55.9/65.7.224/.264 4/43 19S48UL 2 14/12.9/.8.13/.11 19S425UL 23.8/.7.11/.9 19S429UL.18/.16.23/.21 2,45/2,7 2.15/2.35 76/83 44.1/49..177/.197 38/4 1 5/6 19S46UL 7/6.9/.8.1 /.9 1,65/1,7 1.45/1.5 51/53 17.7/17.7.71/.71 28/28 19S475UL 1.24/.21.32/.28 19S474UL 115.21/.18.27/.24 18/16 2,7/3,1 2.5 /2.9 88.3/12.4 57.9/68.7.233/.276 42/45 19S478UL 2.12/.1.16/.14 19S472UL 23.11/.9.14/.13 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. -1 to +6 25,

Dimensions(Unit : mm) 119.8 14.8.3 119.8 14.8.3 8-3.7 Mounting Hole 119.8 14.8.3 6.8.3 4 38.5 AIR FLOW 8-3.7 Mounting Hole Rotating Direction Air Flow Direction 119.8 14.8.3 Rotating Direction Wiring diagram Standard C FANAC Standard FANA (For fan power supply) Sensor circuit 5V Sensor-Purpose Lead Wire 3L Length AWG2828 UL17 6.5.3 4 38.5 6.8.3 4 AIR FLOW Air Flow Direction Brown Yellow 6.5.3 4 4.5V to 5.5V Reference dimension of mounting holes and vent opening(unit : mm) Inlet side 14.8.3 1mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V 117 Sensor circuit 12V 4-4 14.8.3 Brown Yellow Black Outlet side 115 14.8.3 127 9.6V to 14.4V Sensor output V 4-4 14.8.3 115 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 12mm 12mm

AC Fan 12mm sq. San Ace 12 12 12 38mm Mass:55g / 58g() Options(Unit : mm) Finger guards Model :19-19C 12 12mm ** Surface treatment :Nickel-chrome plating (silver) :19-19H 型番 :19-19C :Cation : electropainting (black) :19-19H : 電 Outlet side 4.3.3 φ42.2 152.5 +1.5 ー.5 5 +1 φ1.6 φ1.6 φ113 φ148 13 152.5.5 Resin finger guards 12 12mm * Model :19-1G 型番 :19-19E : 119 1 :19-19K : 電 14.8.3 119 1 14.8.3 φ1.6φ1.6 φ113 4.3.3 φ18.6 φ148 5 +1 13 7.5 4-2.5 4-φ4.3.3 Model :19-19E 12 12mm * Surface treatment :Nickel-chrome plating (silver) 型番 :19-19E : :19-19K :Cation electropainting (black) :19-19K : 電 Inlet side, Outlet side 5 +1 +1 5 φ1.6φ1.6 電 13 152.5.5 φ113 4.3.3 φ18.6 13 Resin filter kits Model :19-1F13(13PPI),19-1F2(2PPI),19-1F3(3PPI),19-1F4(4PPI) 124 1 14.8.3 124 1 14.8.3 1.5.5 4-φ4.3.3 φ148 4-φ11.5 4-2.5 Filter kits Model :19-18 Applicable models:ac Fan 12 12 38mm 8.5 (64) Screen kits Model :19-2 Applicable models:ac Fan 12 12 38mm 14.5.8 8.5 131.8 131.8 89.6 155.6.8 Neither filterkit nor screenkit can be installed on fans with sensor. 155.6.8 Plug cord Exclusive for fans without UL at the end of the model number. (Products compliant with Electrical Appliance and Material Safety Law) Model:489-6-L1/489-6-L21/489-6-L35 7.9 IN G 5 8 19.5 26.9 <PS> E JET ORIEX 3A 25V 24 4 G 6 L VSF1.25mm 2 2 For ー ground,black 用, 5 1 Flat 2 2-core vinyl ーコード cord VFF.75mm 2 Black IN G Exclusive for fans with UL at the end of the model number. (Products compliant with Electrical Appliance and Material Safety Law) Model:489-37-L1/489-37-L21/489-37-L35 7.9 5 8 21.2 24.7 26.9 <PS>E JET ORIEX 3A 25V R1 G +2 6 4 +2 24 L 5 1 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-7-L1/489-7-L21 UL115 AWG18 For ー ground,green/yellow 用, / spiral 8.2 8 24.7 7.9 24 4 26.9 +2 6 Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L35 3,5 L 5 1 Flat 2 2-core vinyl ーコード cord ULSPT-1 AWG18 Black AWG18

Air Flow and Static Pressure Characteristics Standard.3.25.2.15.1.5 8 7 6Hz 1V 6 5 5Hz 1V 4 3 2 1 1 2 3.3.25.2.15.1.5 7 6 6Hz 1V 5 4 5Hz 1V 3 2 1 1 2 3 2 4 6 8 1 12 CFM 2 4 6 8 1 12 CFM 2 4 6 8 1 12 CFM 19S75UL 19S74UL 19S5 19S5UL 19S29UL 19S78UL 19S72UL 19S24 19S24UL 19S8 19S8UL 19S25 19S25UL.3.25.2.15.1.5 7 6 6Hz 1V 5 5Hz 1V 4 3 2 1 1 2 3 AC Fan 12mm 3.1 2.5 1 6Hz 1V 5Hz 1V.12.1.8.6.4.2 3 2 1 6Hz115V/24V 5Hz115V/24V 6Hz1V/2V 5Hz1V/2V 1 2 3 2 4 6 8 1 CFM 19S13 19S13UL.5 1. 1.5 2. 1 2 3 4 5 6 7 CFM 19S6 19S6UL 19S1 19S1UL.3.25.2.15.1.5 7 6 5 4 3 2 1 6Hz 1V 5Hz 1V.3.25.2.15.1.5 7 6 5 4 3 2 1 6Hz 1V 5Hz 1V.12.1.8.6.4.2 3 2 1 6Hz 1V 5Hz 1V 1 2 3 1 2 3.5 1. 1.5 2 4 6 8 1 CFM 19S45UL 19S424UL 19S48UL 19S425UL.35.3.25.2.15.1.5 8 7 6Hz 1V 6 5Hz 1V 5 4 3 2 1 2 4 6 8 1 CFM 19S429UL 1 2 3 4 5 6 CFM 19S46UL 12mm 1 2 3 2 4 6 8 1 CFM 19S475UL 19S474UL 19S478UL 19S472UL

AC Fan 16mm sq. San Ace16 51mm thick 51mm thick() General Specifications Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! brown @ black Sensor yellow 16 16 51mm Mass:1,1g / 1,1g() Specifications Standard 8-5.5 Mounting Hole Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Range Life Expectancy 19-61 1.43/.35.72/.7 19-64 115.39/.31.62/.61 5/6 37.5/33 2,85/3,35 7.2/8.5 254.4/3.4 156.8/166.6.63/.669 56/6-3 to +6 25, 19-62 2.23/.18.36/.35 19-63 23.21/.16.32/.31 Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Range Life Expectancy 19-641 1.43/.35.72/.7 19-644 115.39/.31.62/.61 5/6 37.5/33 2,85/3,35 7.2/8.5 254.4/3.4 156.8/166.6.63/.669 56/6-1 to +6 25, 19-642 2.23/.18.36/.35 19-643 23.21/.16.32/.31 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. Dimensions(Unit : mm) Standard +1 16 138.5.3 28MAX. 28 4 +1 51 4 M4.7 5,5mm deep Earth Ground tap Reference dimension of mounting holes and vent opening(unit : mm) Inlet side, Outlet side 157 138.5.3 4 5.7 +1 16 138.5.3 AIR FLOW ROTATION 175 138.5.3 157 8-5.5 Mounting Hole Rotating Direction Air Flow Direction +1 +1 16 51 138.5.3 28MAX. 28 4 4 M4.7 5,5mm deep Earth Ground tap +1 16 138.5.3 AIR FLOW ROTATION Sensor-Purpose Lead Wire Length 3L 3L AWG28 UL17 AWG28 UL17 Rotating Direction Air Flow Direction

Wiring diagram Standard C FANA FANA (For fan power supply) C Sensor circuit 5V Brown Yellow 4.5V to 5.5V 1mA MAX. 27.6V MAX. Pull-up resistor Model 16 16mm ** :19-619E Surface treatment :Nickel-chrome plating (silver) 19-62 Inlet side, Outlet side 1.5 159.7 1.8 1.8 159.7 1.8 26.3 25.2 195.9 1 61.7.4.55.5.2.4 5.5.2 1.8 195.9 25.2 3.6 1.5.5 1 184 8 1.5 16.5 15.5 8 9 13.5 16.5 3 L 5 Flat 2 2-core vinyl cord ULSPT-1 AWG18 Black 1 8 9 11 17.5 ORIEX 3A 25V 16.5 4 16.5 37 L 5.5 5 1 Flat 2 2-core vinyl cord ULSPT-1 AWG18 Black 8 1.5 1.8 159.7 25.2.5 195.9 1 1.8.4 5.5.2 3.6 1.5 17.5 8 R.3 9 11 ORIEX 3A 25V PS E JET 2 4 4.5 16.5 5.5 2 L 5 1 18.5 19.5 18 PS E JET ORIEX S272 3A 25V 19 9.5 61.7 9 13.5 16.5 3 16mm Sensor output Black V Sensor circuit Brown Yellow Black 9.6V to 14.4V 2mA MAX. 27.6V MAX. Pull-up resistor GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. 12V Sensor output V AC Fan 16mm Options(Unit : mm) Finger guards Plug cord (UL/CSA CERTIFIED)) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-84-L1/489-84-L21 L-shaped Flat 2-core vinyl cord ULSPT-1 AWG18 Black (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 Model:489-86-L1/489-86-L21 straight Model :19-62 Surface treatment :Nickel-chrome plating (silver) Outlet side (Products compliant with Electrical Appliance and Material Safety Law) Model:489-1618-L1/489-1618-L21/489-1618-L28 straight (Products compliant with Electrical Appliance and Material Safety Law) Model:489-1619-L1/489-1619-L21 L-shaped Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 ー L28 2,8 17.5 8 2 L 5 1 Air Flow and Static Pressure Characteristics Standard.8 2.8 2 16mm Static Pressure.6.4.2 15 1 5 6Hz 1V 5Hz 1V.6.4.2 15 1 5 6Hz 1V 5Hz 1V 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3 35 CFM Air Flow 19-61 19-64 19-62 19-63 1 2 3 4 5 6 7 8 9 5 1 15 2 25 35 3 CFM 19-641 19-644 19-642 19-643

Options(Unit : mm) Finger guards Model :19-319E :19-319H 148 172.5 1 Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side 162.4 4.3.2 9.5 1 Model :19-32 Surface treatment :Nickel-chrome plating (silver) Outlet side 4.3.4.2 62.2 3.2 1 AC AC ファン Fan 172mm 152 148 172 1.5 162 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-1619-L1/489-1619-L21 18.5 19.5 18 PS E JET ORIEX S272 3A 25V L-shaped 19 9.5 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 :489-84-L1/489-84-L21 L-shaped 16.5 15.5 9 13.5 16.5 3 L 5 2 ULSPT-1 AWG18 1 9 13.5 3 16.5 8 17.5 8 2 L 5 1 Flat 2-core vinyl cord ULSPT-1 AWG18 Black Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 Air Flow and Static Pressure Characteristics.8 2.6.4.2 15 1 5 6Hz 1V 5Hz 1V 2 4 6 8 19S31 19S32 5 1 15 2 25 3 CFM 19S34 19S33 172mm

AC Fan φ 172mm General Specifications San Ace 172 51mm thick(sidecut type) 51mm thick(round type) 51mm thick(round type /with sensor) Material Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Life Expectancy Varies for each model (L1:Survival rate: 9% at 6, rated voltage,and continuously run in a free air state) Dielectric Strength 5/6Hz 1,5VAC 1minute (between input terminal and frame) Dielectric Strength (With Sensor) between AC input and DC input(sensor output) : 5/6Hz 1,VAC 1minute between AC input and G : 5/6Hz 1,5VAC 1minute, between G and DC input(sensor output) : 5/6Hz 1,VAC 1minute Sensor-Purpose Lead Wire! brown @ black Sensor yellow φ 172mm 51mm Mass:96g / 98g() Specifications Standard Round type Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-311 1.33/.25.65/.64 19-314 115.29/.22.55/.54 5/6 27/25 2,9/3,5 5.3/6.4 187.3/226.1 147/196.59/.787 47/51-3 to +6 25, 19-312 2.16/.13.33/.32 19-313 23.14/.11.28/.27 Voltage Frequency Input Current Locked Rotor Current Rated Speed Air Flow Static Pressure SPL Operating Temperature Life Expectancy 19-371 1.33/.25.65/.64 19-374 115.29/.22.55/.54 5/6 27/25 2,9/3,5 5.3/6.4 187.3/226.1 147/196.59/.787 47/51-1 to +6 25, 19-372 2.16/.13.33/.32 19-373 23.14/.11.28/.27 Two types of power supplies, 5V and 12V, are available in fans with sensor attached. Dimensions(Unit : mm) Standard 1.8.4 7.5.4 AIR FLOW ROTATION 172.8 162.5 M4.7 5 M4.7,5mm deep Earth Ground tap 78 1.8.4 7.5.4 ROTATION 172.8 162.5 AIR FLOW M4.7,5mm M4.7 5 deep Earth Ground tap 8-4.3 Mounting Hole Rotating Direction 7.5 7.5 51.8 Air Flow Direction 3L Sensor-Purpose Leed 3L Length 3L AGW28 AWG28 UL17 72 8-4.3 Mounting Hole 162.5 Rotating Direction 7.5 7.5 51.8 Air Flow Direction

Reference dimension of mounting holes and vent opening (Unit : mm) 162.3 Inlet 吸込側 side,, Outlet 吐出側 side 9.5 162.3 168 R9.5 4-4.5 Wiring diagram Standard A C (For fan power supply) A C FAN FAN 5V Sensor circuit Brown 4.5V to 5.5V Yellow 1mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V 12V Sensor circuit Brown 9.6V to 14.4V Yellow 2mA MAX. 27.6V MAX. Pull-up resistor Sensor output Black V GND should be shared in case that power supply for sensor circuit and that for sensor pull-up are separated. AC Fan 172mm Options(Unit : mm) Finger guards Model :19-319E :19-319H Surface treatment :Nickel-chrome plating (silver) :Cation electropainting (black) Inlet side, Outlet side Model :19-32 Surface treatment :Nickel-chrome plating (silver) Outlet side 148 172.5 1 162.4 4.3.2 9.5 1 4.3.4.2 62.2 3.2 1 152 148 172 1.5 162 Plug cord (Products compliant with Electrical Appliance and Material Safety Law) Model:489-1619-L1/489-1619-L21 18.5 19.5 18 PS E JET ORIEX S272 3A 25V L-shaped 19 9.5 (UL/CSA CERTIFIED) UL FILE No.E5197 CSA FILE No.LR6748 :489-84-L1/489-84-L21 L-shaped 16.5 15.5 9 13.5 16.5 3 L 5 1 9 13.5 3 16.5 8 17.5 8 2 L 5 1 Flat 2-core vinyl cord ULSPT-1 AWG18 Black Model 型番電源コードの長さ Power cord length(mm) (mm) ー L1 1, ー L21 2,1 172mm Air Flow and Static Pressure Characteristics Standard.8 2.8 2.6.4.2 15 1 5 6Hz 1V 5Hz 1V.6.4.2 15 1 5 6Hz 1V 5Hz 1V 2 4 6 8 5 1 15 2 25 3 CFM 19-311 19-314 19-312 19-313 2 4 6 8 5 1 15 2 25 3 CFM 19-371 19-374 19-372 19-373