Fan mm San Ace 36 9GX/9GV type (Model no.: 9GX3612P3K1 only) / General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impell

Transcription

1 Fan Wide lineup including low power consumption fans (9GA type), silent fans (9S type), and high airflow and high static pressure fans. Fan Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination. 9GV J Type name Frame size Voltage Speed code Frame thickness Sensor specifications Frame form Fans with PWM control function 9GV P 4 G 1 Type name Frame size Voltage PWM control function Frame thickness Speed code Individual customer s spec (2 to 4 digits) Frame form Type name 9E 9P 9R 9A 9EC 9G 9GA 9GAX 9GV 9GE 9GX 9HV 9HVA 9S 9SG Frame size (mm) ø ø ø ø 2 (sidecut) (sidecut) Voltage (V) etc. Speed code A B C D E F G H J K L M S W etc. Frame thickness (mm) , Sensor specifications 1 or 1 2 or 2 D1 or D1 With a pulse sensor Without a sensor With a lock sensor Frame form Nil 1 3 Plastic frame: Ribbed frame Plastic frame: Ribless frame mm for 1U applications Aluminum frame: Ribless frame Plastic frame: Ribbed frame How to Read Specifications ( fan) Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412G to to +7 4/6 C (7/4 C) Rated voltage This is the necessary voltage to drive the fan. E.g.),, 48 V The voltage range over which fan operation is guaranteed. Rated current The current when the fan is operating at rated voltage (at free air). Rated input The power value when the fan is operating at rated voltage (at free air). Rated speed The speed when the fan is operating at rated voltage (at free air). Max. airflow The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device). Airflow is the volume of air generated by the fan per unit of time. Max. static pressure The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device). Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed. SPL SPL stands for Sound Pressure Level. The noise level during the fan's rated operation. Please refer to the technical material section for the measurement method. Operating temperature The temperature range over which fan operation is guaranteed (Non- condensing). Expected life Service life hours that 9% of bearings will survive without failing when continuously operated at the rated voltage and 6 C temperature. Expected life at 4 C is for reference only. For more information, please refer to the technical material section. 11

2 Fan mm San Ace 36 9GX/9GV type (Model no.: 9GX3612P3K1 only) / General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature C (Non-condensing, Model no.: 9GX3612P3K1 only), -2 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 46 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GX3612P3K to /6 C -1 to (7/4 C) * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 556). The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV3612J to to +6 4/6 C 9GV3612G Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GX3612P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % PWM デューティ 1% 5% V PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 24 min min -1 1 (%) 12

3 Airflow - Static Pressure Characteristics 9GV3612J31 With pulse sensor 9GV3612G31 With pulse sensor V V V V 1 Fan 36 mm sq Dimensions (unit: mm) (With pulse sensor) 36± ±.3 4-ø3.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG28 UL ±.5 (4) (4) 36± ±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 4-ø ±.3 35 ø ±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 35 Options Finger guards page: p. 513 Model no.:

4 Fan mm San Ace 38 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 52 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA312P3K1 9GA312P3J1 9GA312P3G1 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to /6 C -2 to (7/4 C) Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA312P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% % % PWM PWMduty デューティ cycle 1% V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%) 14

5 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA312P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % %.1 V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM frequency: 周波数 :25 khz 25 khz min -1 1 (%) 235 min -1 Fan 38 mm sq. 9GA312P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) Dimensions (unit: mm) (With ribs) 4-ø3.5±.3 Mounting 取付用穴 hole ±.5 3±.3 (1) 3±.3 38±.5 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 15

6 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 37 3±.3 (16) 4-ø (16) 3±.3 37 Options Finger guards page: p. 513 Model no.:

7 Fan mm San Ace 38 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -2 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 5 g Fan 38 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV312K GV312J31 7 to GV312G to +6 4/6 C 9GV312E to GV312H Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics 9GV312K31 With pulse sensor 9GV312J31 With pulse sensor 9GV312G31 With pulse sensor V 7 V V 7 V V V GV312E31 With pulse sensor 9GV312H31 With pulse sensor V 4.5 V V 4.5 V

8 Dimensions (unit: mm) (With ribs) 38±.5 3±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) 28±.5 (4) ±.5 3±.3 (1) Rotating 回転方向 direction リード線 Lead wire AWG26 UL 17 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 37 3±.3 4-ø3.7 (16) 37.5 (16) 3±.3 37 Options Finger guards page: p. 513 Model no.:

9 Fan mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 19 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H to P45M to +6 4/6 C 19P412H to P412M Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H91 With pulse sensor 19P45M91 With pulse sensor 19P412H91 With pulse sensor V 5 V 4.5 V V 5 V 4.5 V V P412M91 With pulse sensor V

10 Dimensions (unit: mm) ±.3 4-ø3.5±.3 Mounting 取付用穴 hole +1 1 (3) (3) ±.3 (1) Rotating 回転方向 direction Lead リード線 wire AWG26 UL 17 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (15) 4-ø (15) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 2

11 Fan mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 28 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 4/6 C 9GA412P7G to to +7 (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412G to GA412H Other sensor specifications are available as options. Refer to the index (p. 551). -2 to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM PWMduty デューティ cycle 1% (min -1 ) 15 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz min PWM デューティ 1% 5% V (%) 21

12 Airflow - Static Pressure Characteristics 9GA412G71 With pulse sensor 9GA412H71 With pulse sensor V V V V Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø3.5±.3 Mounting 取付用穴 hole 15.2±.5 (4) (4) ±.3 32±.3 (1) 32±.3 4±.3 Lead リード線 wire AWG28 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 22

13 Fan mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 32 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H to to 5.5 6/6 C 19P45M P412R71 7 to /6 C 19P412S to +7 19P412H to /6 C 19P412M P424H to Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H71 With pulse sensor 19P45M71 With pulse sensor 19P412R71 With pulse sensor V 5 V 4.5 V V 5 V 4.5 V V

14 Airflow - Static Pressure Characteristics 19P412S71 With pulse sensor 19P412H71 With pulse sensor 19P412M71 With pulse sensor V V V ±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) (4) ± P424H71 With pulse sensor V Dimensions (unit: mm) Rotating 回転方向 direction (1) Lead リード線 wire AWG24 UL 17 Airflow 風吹出方向 direction 24

15 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 4-ø3.7 (15) 38.5 (15) 32±.3 39 Fan 4 mm sq. Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 25

16 Fan mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 35 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA45P6H1** /6 C to 5.5 9GA45P6F1** /6 C GA412P6G1 4/6 C GA412P6H to to +7 6/6 C GA412P6F GA424P6G1** /6 C 9GA424P6H1** to /6 C 9GA424P6F1** * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA45P6H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 5 5 V V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 5.5 V 5 V 4.5 V Voltage: 電圧 :5 5 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 26

17 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA45P6F1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 6 1% % 5 5 VV 12 PWM PWMduty デューティ cycle 1% V V V.1 2 電圧 Voltage: :55 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min Fan 4 mm sq (%) 9GA412P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % PWM デューティ 1% 5% V % PWM デューティ 1% 5% PWM デューティ 1% 5% V V 9GA412P6H1 With pulse sensor with PWM control function PWM 9GA412P6F1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% V PWM PWMduty デューティ cycle 1% V PWM PWM duty デューティ cycle 1% 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) PWM duty - Speed characteristics example Voltage: 電圧 :12 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) PWM duty - Speed characteristics example Voltage: 電圧 :12 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%) 27

18 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA424P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1%.2 5 5% V PWM デューティ 1% %.1.2 V PWM デューティ 1% % V GA424P6H1 With pulse sensor with PWM control function PWM 9GA424P6F1 With pulse sensor with PWM control function PWM PWM 1% PWMデューティ1% V PWM PWMduty デューティ cycle 1% V PWM PWMduty デューティ cycle 1% V (min -1 ) Voltage: 電圧 :24 V PWM 周波数 frequency: :25 khz 25 khz 16 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :24 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) PWM duty - Speed characteristics example Voltage: 電圧 :24 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 28

19 Dimensions (unit: mm) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (1) Fan 4 mm sq. 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 29

20 Fan mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45J /6 C 19P45H to to +7 19P45F /6 C 19P45M P412G /6 C -2 to +6 19P412D P412E61 7 to P412H /6 C -2 to +7 19P412F P412M61 8 to P424G61 12 to to +6 4/6 C 19P424D61 12 to P424H to P424F61 14 to to +7 6/6 C 19P424B to Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45J61 With pulse sensor 19P45H61 With pulse sensor 19P45F61 With pulse sensor (inch H2O) (Pa) V 5 V 4.5 V V 5 V 4.5 V V 5 V 4.5 V.2.3 3

21 Airflow - Static Pressure Characteristics 19P45M61 With pulse sensor 19P412G61 With pulse sensor 19P412D61 With pulse sensor V 5 V 4.5 V V V Fan 4 mm sq. 19P412E61 With pulse sensor 19P412H61 With pulse sensor 19P412F61 With pulse sensor.5 12 (inch H2O).4 (Pa) V V V P412M61 With pulse sensor 19P424G61 With pulse sensor 19P424D61 With pulse sensor V P424H61 With pulse sensor 19P424F61 With pulse sensor 19P424B61 With pulse sensor V V

22 Dimensions (unit: mm) ±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) リード線 Lead wire AWG24 UL ±.5 (4) ±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 4-ø3.7 (15) 38.5 (15) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 32

23 Fan mm San Ace 4 9HV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 6 g Fan 4 mm sq. Specifications The models listed below have pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9HV412P3K to to +6 4/6 C * PWM frequency: 25 khz Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 14 V PWM デューティ 1% % 1. 2 % PWM PWMduty デューティ cycle 1% 1% 12.6 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) Dimensions (unit: mm) 8-ø3.5±.3 Mounting 取付用穴 hole ±.3 32±.3 (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 4±.3 4±.3 28±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 33

24 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.5) 4-ø3.7 4-R2.85 ø42.8 (17.5) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 34

25 Fan mm San Ace 4 9GAX type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 53 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GAX412P3S1** to GAX412P3S to +6 3/6 C GAX412P3K1** to GAX412P3K * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GAX412P3S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ % % PWM PWM duty デューティ cycle 1% 1% 12.6 V 1.8 V Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz min min -1 1 (%) 35

26 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GAX412P3S3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ % % PWM PWM duty デューティ cycle 1% 1% 12.6 V 1.8 V Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz (min -1 ) min min (%) 9GAX412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4. 1 V PWM デューティ 2.5 1% % PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 22 min min -1 1 (%) 9GAX412P3K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 6 1% % PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz 22 min min (%) 36

27 Dimensions (unit: mm) (With ribs) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 4-ø3.7 (17.6) 4 (17.6) 32±.3 39 Fan 4 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 37

28 Fan mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 53 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412P3K to +6 3/6 C 9GA412P3J GA412P3G to GA412P3H GA412P3M to +7 4/6 C 9GA424P3J1** GA424P3G1** to GA424P3H1** GA424P3M1** * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 5 1% % PWM PWMduty デューティ cycle 1% V V Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz 22 min min (%) 38

29 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % PWM デューティ 1% 5% V PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 45 min min -1 Fan 4 mm sq (%) 9GA412P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % PWM デューティ 1% 5% V PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 45 min -1 1 (%) 165 min -1 9GA412P3H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% % V 1.8 V min min -1 1 (%) 9GA412P3M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % PWM デューティ 1% 5% V PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 35 min -1 1 (%) 125 min -1 39

30 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA424P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWM duty デューティ cycle 1% 1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 18 min (%) 9GA424P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 165 min (%) 9GA424P3H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% V 21.6 V min (%) 9GA424P3M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM 1% PWMデューティ1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 125 min (%)

31 Dimensions (unit: mm) (With ribs) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Fan 4 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 41

32 Fan mm San Ace 4 9GE type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 55 g Specifications The models listed below have pulse sensors with PWM control function. Model no. 9GE412P3K3 9GE412P3J3 9GE412P3G3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to +6 4/6 C Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GE412P3K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example %.4 V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 3 min -1 1 (%) 165 min -1 42

33 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GE412P3J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) (Pa) % 5% V PWM デューティ 1% PWM PWMduty デューティ cycle 1% V V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 265 min -1 1 (%) 15 min -1 Fan 4 mm sq. 9GE412P3G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%) Dimensions (unit: mm) 8-ø3.5±.3 Mounting 取付用穴 hole 4±.3 28±.5 4± ±.3 32 ±.3 (1) 32 ±.3 4 ±.3 Lead リード線 wire AWG28 UL 161 Rotating 回転方向 direction Airflow 風吹出方向 direction 43

34 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 44

35 Fan mm San Ace 4 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -2 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 5 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV412K to GV412J to +6 9GV412G /6 C 7 to GV412H GV412C to +7 Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics 9GV412K31 With pulse sensor 9GV412J31 With pulse sensor 9GV412G31 With pulse sensor V 1.8 V V V V V

36 Airflow - Static Pressure Characteristics 9GV412H31 With pulse sensor 9GV412C31 With pulse sensor V V ±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG26 UL ±.5 (4) (4) 4±.3 32±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32± V V Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 46

37 Fan mm San Ace 4 9P type Model 19P424R313 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 52 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H /6 C to P45F to +7 6/6 C 19P412K313 8 to P412J to P412G to +6 4/6 C 19P412B P412H313 7 to P412F to +7 6/6 C 19P412M to P424R P424J to to +6 4/6 C 19P424G P424B P424H to P424F to to +7 6/6 C Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H313 With pulse sensor 19P45F313 With pulse sensor 19P412K313 With pulse sensor V 5 V 4.5 V V 5 V 4.5 V V 8 V

38 Airflow - Static Pressure Characteristics 19P412J313 With pulse sensor 19P412G313 With pulse sensor 19P412B313 With pulse sensor (inch H2O) (Pa) V V 13.2 V 7 V V 13.2 V 7 V V V P412H313 With pulse sensor 19P412F313 With pulse sensor 19P412M313 With pulse sensor 1.2 V P424R313 With pulse sensor 19P424J313 With pulse sensor 19P424G313 With pulse sensor 26.4 V P424B313 With pulse sensor 19P424H313 With pulse sensor 19P424F313 With pulse sensor V V

39 Dimensions (unit: mm) 4±.5 32±.3 4±.5 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (1) 28±.5 (4) (4) Inlet side, Outlet side 39 32±.3 (15) 4-ø (15) 32±.3 39 Fan 4 mm sq. Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 49

40 Fan mm San Ace 52 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 4 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA512P7G GA512P7A to GA512P7H GA524P7A to GA524P7H GA512P7M GA524P7G to +7 4/6 C 9GA524P7M * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA512P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 78 min (%) 5

41 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA512P7A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 63 min -1 Fan 52 mm sq (%) 9GA512P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % V PWM デューティ 1% %.1.2 V PWM デューティ 1% V PWM デューティ 1% 9GA512P7M1 With pulse sensor with PWM control function PWM GA524P7G1 With pulse sensor with PWM control function PWM Static 静圧 pressure PWM PWMduty デューティ cycle 1% 1.2 V PWM PWMduty デューティ cycle 1% 1.2 V PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) (%) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (%) 43 min -1 PWM duty - Speed characteristics example 34 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 78 min (%) 51

42 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA524P7A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1 V.4 1 PWM PWMduty デューティ cycle 1% (min -1 ) 8 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% V min (%) 9GA524P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% Static 静圧 pressure PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 43 min (%) 9GA524P7M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% V min (%) 52

43 Dimensions (unit: mm) 52±.5 42±.3 4-ø4.5±.3 Mounting 取付用穴 hole ±.3 52±.5 Rotating 回転方向 direction (1) Lead リード線 wire AWG26 UL 17 (3) (3) 15±.5 Airflow 風吹出方向 direction Inlet side, Outlet side ±.3 ø ±.3 Fan 52 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 4-ø4.5 Options Finger guards page: p. 513 Model no.: , E 53

44 Fan mm San Ace 52 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 55 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P55M to /6 C 19P512A to /6 C -2 to +7 19P512H to /6 C 19P512M P524A to +6 4/6 C 19P524H to to +7 6/6 C 19P524M Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P55M71 With pulse sensor 19P512A71 With pulse sensor 19P512H71 With pulse sensor V 5 V 4.5 V V V

45 Airflow - Static Pressure Characteristics 19P512M71 With pulse sensor 19P524A71 With pulse sensor 19P524H71 With pulse sensor V P524M71 With pulse sensor 14 V.4 4-ø3.7±.3 Mounting 取付用穴 hole 52±.5 42±.3 Lead リード線 wire AWG24 UL 17 (3) (3) ±.5 42± V V Fan 52 mm sq Dimensions (unit: mm) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 55

46 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 51 42±.3 (24) 4-ø (24) 42±.3 51 Options Finger guards page: p. 513 Model no.: , E 56

47 Fan mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 35 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612G91 7. to to +6 9GA612H to to GA612L to +7 Other sensor specifications are available as options. Refer to the index (p. 551). 4/6 C 7/4 C Airflow - Static Pressure Characteristics 9GA612G91 With pulse sensor 9GA612H91 With pulse sensor 9GA612L91 With pulse sensor V V (inch H2O) (Pa) V (inch H2O) (Pa) V

48 Dimensions (unit: mm) 4-ø4.3±.3 Mounting 取付用穴 hole 6±.5 5± ±.3 6±.5 (1) リード線 Lead wire AWG28 UL 17 (3) (3) 1±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 4-ø ±.3 ø63 5±.3 58 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 58

49 Fan mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Model 9GA624P7G1 is not TÜV certified. Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 5 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GA612P7G to /6 C to +7 9GA612P7H1 (7/4 C) GA624P7G1** to * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612G GA612H to GA612M GA612L GA624M to Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). -2 to +7 4/6 C (7/4 C) 6/6 C 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 5% PWM PWM duty デューティ cycle 1% 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 59 min min (%) 59

50 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 5% 12 V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 49 min min (%) 9GA624P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ.3 7 1% % PWM PWMduty デューティ cycle 1% V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 59 min -1 1 (%) 9GA612G71 With pulse sensor 9GA612H71 With pulse sensor 9GA612M71 With pulse sensor V V V GA612L71 With pulse sensor 9GA624M71 With pulse sensor V

51 Dimensions (unit: mm) (With pulse sensor with PWM control function) 6±.5 4-ø4.5±.3 Mounting 取付用穴 hole 5±.3 Lead リード線 wire AWG28 UL (3) 15±.5 (3) Fan 6 mm sq. (1) 5±.3 Airflow 風吹出方向 direction Rotating 回転方向 direction 58 5±.3 4-ø4.7 ø63 5± ±.5 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 61

52 Fan mm San Ace 6 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 6 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P65H to P65M to +7 6/6 C 19P612K to to P612S /6 C 19P612H to to +7 19P612M to P612B /6 C 19P624J to +6 4/6 C 19P624S71 14 to P624H to +7 6/6 C 19P624M to Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P65H71 With pulse sensor 19P65M71 With pulse sensor 19P612K71 With pulse sensor V 5 V 4.5 V V 5 V 4.5 V V

53 Airflow - Static Pressure Characteristics 19P612S71 With pulse sensor 19P612H71 With pulse sensor 19P612M71 With pulse sensor V V V Fan 6 mm sq. 19P612B71 With pulse sensor 19P624J71 With pulse sensor 19P624S71 With pulse sensor V 14 V V (m /min) P624H71 With pulse sensor 19P624M71 With pulse sensor V V

54 Dimensions (unit: mm) 4-ø4.3±.3 Mounting 取付用穴 hole ± ±.3 (4) Lead リード線 wire AWG24 UL (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 4-ø ±.3 ø63 5±.3 58 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 64

55 Fan mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 7 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612P6G to GA612P6S /6 C -2 to +7 9GA624P6G (7/4 C) to GA624P6S * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612H to GA612M to +7 6/6 C 9GA624H to GA624M Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 685 min (%) 65

56 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P6S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% V PWM デューティ 1% 5% GA624P6G1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 55 min (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 685 min -1 1 (%) 9GA624P6S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 55 min (%) 9GA612H61 With pulse sensor 9GA612M61 With pulse sensor 9GA624H61 With pulse sensor 6 V V V V 1.8 V V 1.8 V V 21.6 V

57 Airflow - Static Pressure Characteristics 9GA624M61 With pulse sensor V V 1 V Fan 6 mm sq Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG26 UL 17 6±.5 5± ±.3 6±.5 Rotating 回転方向 direction 4-ø ±.3 ø63 5±.3 58 (1) (4) (4) 2±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 67

58 Fan mm San Ace 6 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P612W61 6 to P612H to P612M /6 C 19P624W61 12 to to +7 19P624H to P624M P648H to /6 C Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P612W61 With pulse sensor 19P612H61 With pulse sensor 19P612M61 With pulse sensor V 16 V V V

59 Airflow - Static Pressure Characteristics 19P624W61 With pulse sensor 19P624H61 With pulse sensor 19P624M61 With pulse sensor V V V Fan 6 mm sq. 19P648H61 With pulse sensor V 48 V 43 V Dimensions (unit: mm) ø4.3±.3 Mounting 取付用穴 hole 5±.3 (3) (5) リード線 Lead wire AWG24 UL ± (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 69

60 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 4-ø ±.3 ø63 5±.3 58 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 7

61 Fan mm San Ace 6 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 55 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S612S to S612H to +7 4/6 C 9S612F to S612M Other sensor specifications are available as options. Refer to the index (p. 557). Airflow - Static Pressure Characteristics 9S612S41 With pulse sensor 9S612H41 With pulse sensor 9S612F41 With pulse sensor V V V S612M41 With pulse sensor V

62 Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 17 (3) 25±.5 (3) 6±.5 5± (1) 5±.3 6±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 4-ø ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 72

63 Fan mm San Ace 6 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 9 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] G612P4S to G612P4H /6 C 9G624P4S1-2 to (7/4 C) to G624P4H G648P4S to * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 548 to 549). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9G612P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% % PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 73

64 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9G612P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % V PWM デューティ 1% 5% V PWM デューティ 1% 5% % V 5 5 9G624P4S1 With pulse sensor with PWM control function PWM PWM デューティ 1% 5% 9G624P4H1 With pulse sensor with PWM control function PWM PWM duty デューティ cycle 1% PWM duty デューティ cycle 1% 1.2 V V 2.4 V PWM duty デューティ cycle 1% Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 95 min min Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz (%) PWM duty - Speed characteristics example 33 min -1 1 (%) 11 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 95 min min (%) 9G648P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 48 V/72 V 36 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 11 min min -1 1 (%)

65 Dimensions (unit: mm) (With ribs) 6±.5 5±.3 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 (1) Lead リード線 wire AWG26 UL 143 Fan 6 mm sq. 5±.3 6±.5 (3) 25±.5 (3) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 75

66 Fan mm San Ace 6 9R type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19R65H to +7 19R65F to to +6 6/6 C 19R65M to +7 19R612J to +6 4/6 C 1.8 to R612G R612D to R612S R612H41 6 to to +7 6/6 C 19R612F R612M41 7 to R624J to to +6 19R624G to /6 C 19R624D R624S to to +7 19R624H /6 C 19R624F R624M41 14 to R648J to R648G to to +6 4/6 C 19R648H41 4 to to +7 6/6 C Other sensor specifications are available as options. Refer to the index (p. 545). Airflow - Static Pressure Characteristics 19R65H41 With pulse sensor 19R65F41 With pulse sensor 19R65M41 With pulse sensor V 4 5 V V V 5 V 4.5 V V 2 5 V V

67 Airflow - Static Pressure Characteristics 19R612J41 With pulse sensor 19R612G41 With pulse sensor 19R612D41 With pulse sensor V 1.8 V V 1.8 V V Fan 6 mm sq. 19R612S41 With pulse sensor 19R612H41 With pulse sensor 19R612F41 With pulse sensor V V V R612M41 With pulse sensor 19R624J41 With pulse sensor 19R624G41 With pulse sensor V V 21.6 V V R624D41 With pulse sensor 19R624S41 With pulse sensor 19R624H41 With pulse sensor

68 Airflow - Static Pressure Characteristics 19R624F41 With pulse sensor 19R624M41 With pulse sensor 19R648J41 With pulse sensor V V 48 V 43.2 V R648G41 With pulse sensor 19R648H41 With pulse sensor V 48 V 43 V V 5 48 V V Dimensions (unit: mm) (With ribs) ± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL ±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 78

69 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø4.5 Fan 6 mm sq ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 79

70 Fan mm San Cooler 6 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 8 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A612G41 6 to to +6 3/6 C 9A612S A612H to A612F to +7 4/6 C 9A612M41 7 to A624G41 12 to to +6 3/6 C 9A624S A624H to A624F to +7 4/6 C 9A624M41 14 to Other sensor specifications are available as options. Refer to the index (p. 546). Airflow - Static Pressure Characteristics 9A612G41 With pulse sensor 9A612S41 With pulse sensor 9A612H41 With pulse sensor V 13.2 V V V

71 Airflow - Static Pressure Characteristics 9A612F41 With pulse sensor 9A612M41 With pulse sensor 9A624G41 With pulse sensor V V Fan 6 mm sq. 9A624S41 With pulse sensor 9A624H41 With pulse sensor 9A624F41 With pulse sensor A624M41 With pulse sensor V

72 Dimensions (unit: mm) (With ribs) ± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL ±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 82

73 Fan mm San Ace 6 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 135 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] /6 C 9HV612P1J to to (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV612P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% % PWM PWMduty デューティ cycle 1% /12.6 V 1.8 V Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz (%) 217 min -1 Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole ±.5 5±.3 (1) リード線 Lead wire AWG24 UL 143 5±.3 6±.5 4±.3 4±.3 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 83

74 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 84

75 Fan mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GA612P1J3** 1.8 to to GA612P1K3** to GA612P1H3** 1.8 to /6 C (7/4 C) 9GA612P1K6-2 to GA624P1J3** 21.6 to to GA624P1K3** 21.6 to to * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P1J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 7 1% %.4 6% V PWM PWM duty デューティ cycle 1% 1% V 1.8 V 回転速度 Fan speed (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 175 min -1 1 (%) 85

76 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P1K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 6% 2% PWM PWMduty デューティ cycle 1% 1% 13.2 V 1.8 V 回転速度 Fan speed (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 148 min (%) 9GA612P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 14 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 6% 2% V 1.8 V min (%) 9GA612P1K6 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 V 2.5 PWM デューティ 6 1% % % PWM 1% PWMデューティ1% V, 1.8 V 回転速度 Fan speed Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%) 9GA624P1J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1% 2% 6% V PWM PWMduty デューティ cycle 1% 1% 25.2 V 21.6 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%)

77 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA624P1K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V 6 PWM デューティ 1% % 1 2% PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V ø4.5±.3 Mounting 取付用穴 hole +5 3 Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 59 5± ø ±.3 59 (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 148 min -1 1 (%) Fan 6 mm sq. Dimensions (unit: mm) (With ribs) 6±.5 5±.3 (1) 5±.3 6±.5 (4) 38±.5 (4) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 87

78 Fan mm San Ace 6 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV612P1G GV612P1H to GV612P1M to +7 4/6 C 9GV612P1L1** 1.8 to GV624P1G to GV624P1M3** GV648P1H to * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV612P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 min min (%) 88

79 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV612P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % V PWM デューティ 1% PWM PWMduty デューティ cycle 1% V (min -1 ) Voltage: 電圧 :12 V PWM PWM 周波数 frequency: :25 khz 25 khz 27 min -1 1 (%) 145 min -1 Fan 6 mm sq. 9GV612P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1%.8 2 5%.4 1 % PWM PWM duty デューティ cycle 1% 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 9GV612P1L1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 9GV624P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 2.4 V Voltage: 電圧 : V (min -1 ) PWM PWM 周波数 frequency: :25 khz 25 khz min min (%) 89

80 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV624P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 13 min (%) 9GV648P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV 7 PWM デューティ 6 1% 5 5% 4 % PWM PWMduty デューティ cycle 1% 57 V 48 V 38 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole ±.5 5±.3 (1) リード線 Lead wire AWG26 UL 17 UL 143( (Model 型番 :9GV612P1G3 no.: only) のみ ) 5±.3 6±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 9

81 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø4.5 Fan 6 mm sq ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 91

82 Fan mm San Ace 6 9G type (Ribless model depicted) General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 11 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G612G to G612S G624G G624S to to +7 4/6 C 9G624H G648G to G648S Other sensor specifications are available as options. Refer to the index (pp. 548 to 549). Airflow - Static Pressure Characteristics 9G612G11 With pulse sensor 9G612S11 With pulse sensor 9G624G11 With pulse sensor V V V

83 Airflow - Static Pressure Characteristics 9G624S11 With pulse sensor 9G624H11 With pulse sensor 9G648G11 With pulse sensor V G648S11 With pulse sensor V.4 48 V 28 V V V.8 48 V 28 V Fan 6 mm sq. Dimensions (unit: mm) (With ribs) ± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL ±.5 (4) (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 93

84 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5± ø ±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: E, H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 94

85 Fan mm San Ace 7 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 17 g Fan 7 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA712P1G1 9GA712P1H1 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA712P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 165 min -1 1 (%) 9GA712P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 6 V 6 PWM PWMduty デューティ cycle 1% (min -1 ) 14 Voltage: 電圧 :12 V PWM 周波数 frequency: :25 khz 25 khz % PWM デューティ 1% 5% V 1.8 V min (%) 95

86 Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 7± ± (1) 61.5±.3 7±.5 Lead リード線 wire AWG24 UL 143 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 61.5 Outlet side ø4.5 4-ø4.5 ø74 ø Options Finger guards page: p. 513 Model no.:

87 Fan mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Model 9GA812H71 is not certified. Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 65 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P7G to GA812P7S /6 C -2 to +7 9GA824P7G (7/4 C) to GA824P7S * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812H to GA824H to Other sensor specifications are available as options. Refer to the index (p. 552). -2 to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM frequency: 25 khz PWM 周波数 :25 khz 61 min (%) 97

88 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P7S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1% 5% PWM デューティ 1% 5% V V 9GA824P7G1 With pulse sensor with PWM control function PWM PWM duty デューティ cycle 1% 1.2 V PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 9GA824P7S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 min (%) 9GA812H71 With pulse sensor 9GA824H71 With pulse sensor V 13.2 V V

89 Dimensions (unit: mm) (With pulse sensor with PWM control function) 8± ±.3 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 Fan 8 mm sq. 71.5±.3 8±.5 Rotating direction 回転方向 (1) 71.5±.3 4-ø ø9 71.5±.3 Lead リード線 wire AWG28 UL 17 (4) (4) 15±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 99

90 Fan mm San Ace 8 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 68 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P812H /6 C 12 7 to P812M /6 C -2 to +7 19P824H /6 C to P824M /6 C Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P812H71 With pulse sensor 19P812M71 With pulse sensor 19P824H71 With pulse sensor V V 7 V V P824M71 With pulse sensor V

91 Dimensions (unit: mm) 8± ±.3 8± ±.3 4-ø4.3±.3 (3.5) Mounting 取付用穴 hole Lead リード線 wire AWG24 UL (3.5) Fan 8 mm sq. (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 71.5±.3 4-ø ±.3 4-ø4.5 ø84 ø ± ±.3 Inlet side Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 11

92 Fan mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 8 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P6G1 4/6 C to (7/4 C) 9GA812P6M /6 C -2 to +7 4/6 C 9GA824P6G to (7/4 C) 9GA824P6M /6 C * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 585 min (%) 12

93 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P6M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ.1 1% % PWM デューティ 1% 5% V V GA824P6G1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% 1.2 V PWM PWMduty デューティ cycle 1% V (min -1 ) (min -1 ) 75 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 29 min -1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 585 min (%) Fan 8 mm sq. 9GA824P6M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 29 min (%) 13

94 Dimensions (unit: mm) 4-ø4.5±.3 Mounting 取付用穴 hole (4) 2±.5 (4) 8± ± (1) 71.5±.3 8±.5 Lead リード線 wire AWG26 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø ø9 71.5± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 14

95 Fan mm San Ace 8 9P type Model 19P812C61 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 1 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P812C to +6 19P812H to P812M /6 C -2 to +7 19P824H to P824M P848C to to /6 C 19P848H to +6 Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P812C61 With pulse sensor 19P812H61 With pulse sensor 19P812M61 With pulse sensor V V V

96 Airflow - Static Pressure Characteristics 19P824H61 With pulse sensor 19P824M61 With pulse sensor 19P848C61 With pulse sensor V V V 48 V 38 V P848H61 With pulse sensor V V V Dimensions (unit: mm) 8± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole 2-1 (3.5) (3.5) (1) 8± ± リード線 Lead wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction 16

97 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 71.5±.3 4-ø ±.3 4-ø4.5 ø ± ±.3 ø89.5 Fan 8 mm sq Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 17

98 Fan mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 11 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P4J GA812P4G to GA812P4H /6 C -2 to (7/4 C) 9GA824P4J GA824P4G to GA824P4H * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P4J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 6% PWM PWMduty デューティ cycle 1% V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 8 74 min (%) 18

99 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.7 18 V PWM デューティ.5 1% % % PWM PWMduty デューティ cycle 1% 13.2 V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz (%) 68 min -1 Fan 8 mm sq. 9GA812P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 25% V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 9GA824P4J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2 V PWM デューティ.6 1% % % V 16.6 PWM デューティ 14 1% % % GA824P4G1 With pulse sensor with PWM control function PWM (m 3 /min PWM PWMduty デューティ cycle 1% 1% V V PWM PWM duty デューティ cycle 1% 1% V V (min -1 ) (%) Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 74 min -1 PWM duty - Speed characteristics example 68 min -1 1 (%) 19

100 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA824P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 6% 25% PWM PWM duty デューティ cycle 1% 1% 26.4 V 21.6 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 Lead リード線 wire AWG26 UL ±.3 4-ø4.5 ø ±.3 8± ±.3 (1) 71.5±.3 8±.5 (4) 25.2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side

101 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) Fan 8 mm sq. 111

102 Fan mm San Ace 8 9S type Silent Fan Model 9S812H41 is not TÜV certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 75 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. 9S812H41 9S812F41 Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 5. to to S812M S812L41 6. to S824M to S824L Other sensor specifications are available as options. Refer to the index (p. 557). -1 to +7 4/6 C Airflow - Static Pressure Characteristics 9S812H41 With pulse sensor 9S812F41 With pulse sensor 9S812M41 With pulse sensor V 13.2 V V V

103 Airflow - Static Pressure Characteristics 9S812L41 With pulse sensor 9S824M41 With pulse sensor 9S824L41 With pulse sensor V V 1 V V 1 V 4-ø4.3±.3 Mounting 取付用穴 hole 25±.5 (4) (4) 8± ±.3 リード線 Lead wire AWG24 UL (1) 71.5±.3 8±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction 4-ø ±.3 ø ±.3 Fan 8 mm sq Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 113

104 Fan mm San Ace 8 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 125 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GV812P4K to GV812P4J to +7 4/6 C GV824P4K to GV848P4K to * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P4K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 114

105 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P4J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 Fan 8 mm sq (%) 9GV824P4K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% % 5% PWM PWMduty デューティ cycle 1% 2.4 V Voltage: 電圧 : V (min -1 ) PWM frequency: 周波数 :25 khz 25 khz min min (%) 9GV848P4K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 53 V 48 V 43 V Voltage: 電圧 :48 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 115

106 Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG26 UL 17 8± ± (1) 71.5±.3 8±.5 (4) (4) 25.2±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø4.5 ø ± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 116

107 Fan mm San Ace 8 9R type Model 19R812E41 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 11 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19R85F to R85M to +7 6/6 C 19R812G to R812E to +6 4/6 C 19R812S R812H to R812F to +7 6/6 C 19R812M R812L41 7 to R824G to to +6 4/6 C 19R824S R824H to R824F to +7 6/6 C 19R824M R824L41 14 to R848K to +6 4/6 C to R848S to +7 6/6 C Other sensor specifications are available as options. Refer to the index (pp. 545 to 546). Airflow - Static Pressure Characteristics 19R85F41 With pulse sensor 19R85M41 With pulse sensor 19R812G41 With pulse sensor V 5 V 4.5 V V 5 V 4.5 V V V

108 Airflow - Static Pressure Characteristics 19R812E41 With pulse sensor 19R812S41 With pulse sensor 19R812H41 With pulse sensor V V V R812F41 With pulse sensor 19R812M41 With pulse sensor 19R812L41 With pulse sensor V V V V R824G41 With pulse sensor 19R824S41 With pulse sensor 19R824H41 With pulse sensor 7 V R824F41 With pulse sensor 19R824M41 With pulse sensor 19R824L41 With pulse sensor V

109 Airflow - Static Pressure Characteristics 19R848K41 With pulse sensor 19R848S41 With pulse sensor V 48 V 4.8 V ± ±.3 8± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL ±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 71.5±.3 4-ø ø9 71.5± V.5 48 V 4.8 V Fan 8 mm sq. Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 119

110 Fan mm San Cooler 8 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A812G41 6 to to +6 3/6 C 9A812S A812H to A812F to +7 4/6 C 9A812M A812L41 7 to A824G41 12 to to +6 3/6 C 9A824S A824H to A824F to +7 4/6 C 9A824M A824L41 14 to Other sensor specifications are available as options. Refer to the index (pp. 546 to 547). Airflow - Static Pressure Characteristics 9A812G41 With pulse sensor 9A812S41 With pulse sensor 9A812H41 With pulse sensor V 13.2 V V V

111 Airflow - Static Pressure Characteristics 9A812F41 With pulse sensor 9A812M41 With pulse sensor 9A812L41 With pulse sensor V V V A824G41 With pulse sensor 9A824S41 With pulse sensor 9A824H41 With pulse sensor 9A824F41 With pulse sensor 9A824M41 With pulse sensor 9A824L41 With pulse sensor.5 7 V V Fan 8 mm sq. 121

112 Dimensions (unit: mm) (With ribs) 8± ±.3 8± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL ±.5 (4) (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø ø9 71.5± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 122

113 Fan mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GA812P2S to GA812P2H to +7 9GA812P2M1 1.2 to to +55 4/6 C 9GA824P2S to to +7 9GA848P2S to to +7 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 552 to 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P2S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 97 min min -1 1 (%) 123

114 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P2H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 9GA812P2M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 12.6 V 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 67 min min -1 1 (%) 9GA824P2S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % 48 V V PWM デューティ 1% 5% V PWM デューティ 1% 5% GA848P2S1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% 2.4 V PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 97 min min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :48 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 97 min min (%)

115 Dimensions (unit: mm) (With ribs) 8± ±.3 4-ø4.5±.3 取付用穴 Mounting hole Lead リード線 wire AWG26 UL ±.3 8±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 71.5±.3 4-ø Fan 8 mm sq. (1) ø9 71.5±.3 (4) (4) 32±.5 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 125

116 Fan mm San Ace 8 9HVA type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 22 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] /6 C 9HVA812P1G to to (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HVA812P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 6% PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 126

117 Dimensions (unit: mm) (With ribs) 8± ±.3 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG22 UL Fan 8 mm sq. (1) (4) (4) 71.5±.3 8±.5 Rotating 回転方向 direction 38±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 71.5±.3 4-ø ø9 71.5±.3 Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 127

118 Fan mm San Ace 8 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 23 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] HV812P1G to to +7 4/6 C 9HV824P1G3** to (7/4 C) HV848P1G to 57-1 to * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Model no. for a ribless frame model is 9HV824P1G11. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV812P1G61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 5% PWM duty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 128

119 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV824P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1% 5% V PWM duty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz min -1 (%) Fan 8 mm sq. 9HV848P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 48 V V PWM デューティ 1% 5% PWM duty デューティ cycle 1% 57 V 48 V 36 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 149 min min -1 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 38±.5 (4) (4) 8± ± (1) 71.5±.3 8±.5 リード線 Lead wire AWG22 UL 143 Rotating 回転方向 direction Airflow 風吹出方向 direction 129

120 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 71.5±.3 4-ø ±.3 4-ø ø ± ø9 71.5± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 13

121 Fan mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 16 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P1G GA812P1S to GA812P1H /6 C -2 to (7/4 C) 9GA824P1S to GA824P1H GA848P1S to * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P1G61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1.8 1% % % PWM PWMduty デューティ cycle 1% 1% V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 131

122 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P1S61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 12 V PWM デューティ 1% 5% % V PWM デューティ 1% 5% % V PWM デューティ 1% 5% GA812P1H61 With pulse sensor with PWM control function PWM 9GA824P1S61 With pulse sensor with PWM control function PWM Static pressure 静圧 % V PWM デューティ 1% GA824P1H61 With pulse sensor with PWM control function PWM % PWM PWMduty デューティ cycle 1% 1% V PWM PWMduty デューティ cycle 1% 1% 13.2 V 1.8 V V PWM 1% PWMデューティ1% V PWM 1% PWMデューティ1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min -1 1 (%)

123 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA848P1S61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % VV PWM デューティ 1% 5% PWM 1% PWMデューティ1% V 48 V 4.8 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min -1 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 (1) 71.5±.3 8±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 4-ø4.5 ø ± min -1 1 (%) Fan 8 mm sq. Dimensions (unit: mm) (With ribs) 8± ±.3 Lead リード線 wire AWG26 UL 143 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±

124 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 134

125 Fan mm San Ace 8 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 22 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GV812P1G to GV812P1H GV812P1F to to +7 4/6 C GV812P1M GV824P1G to GV848P1G to * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 554 to 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min -1 1 (%) 12 min

126 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % V PWM デューティ 1% 5% % GV812P1F3 With pulse sensor with PWM control function PWM PWM duty デューティ cycle 1% V 1.8 V PWM duty デューティ cycle 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min -1 1 (%) 97 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 9GV812P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM duty デューティ cycle 1% (min -1 ) 7 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% % V 6 6 min min (%) 9GV824P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 2.4 V Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min -1 1 (%) 12 min -1

127 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV848P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % 2 48 VV PWM デューティ 1% PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V (min -1 ) 電圧 Voltage: :48 VV PWM 周波数 frequency: :25 khz 25 khz 12 min min -1 1 (%) Fan 8 mm sq. Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole 8± ±.3 リード線 Lead wire AWG24 UL ±.3 8±.5 Inlet side, Outlet side 71.5±.3 4-ø ø9 71.5±.3 (1) (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 137

128 Fan mm San Ace 8 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 17 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G812K to to +6 9G812G to G812H G824G /6 C to to +7 9G824H G848G to G848H Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G812K11 With pulse sensor 9G812G11 With pulse sensor 9G812H11 With pulse sensor V 1.8 V V V

129 Airflow - Static Pressure Characteristics 9G824G11 With pulse sensor 9G824H11 With pulse sensor 9G848G11 With pulse sensor V V V 48 V 4.8 V Fan 8 mm sq. 9G848H11 With pulse sensor V V V Dimensions (unit: mm) (With ribs) 8± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL (1) 71.5±.3 8±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 139

130 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø ø9 71.5± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 14

131 Fan mm San Ace 92 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 125 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA912P4J3 9GA912P4G3 9GA912P4S3 9GA924P4J3 9GA924P4G3 9GA924P4S3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to +7 6/6 C to Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P4J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 5 min min (%) 141

132 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P4G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % % % V PWM デューティ 1% 5% % V PWM デューティ 1% 5% V PWM デューティ 1% GA912P4S3 With pulse sensor with PWM control function PWM 9GA924P4J3 With pulse sensor with PWM control function PWM PWM PWM duty デューティ cycle 1% 1% 1.2 V PWM PWMduty デューティ cycle 1% 1.2 V PWM PWMduty デューティ cycle 1% 2.4 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 44 min min (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 5 min min (%) 9GA924P4G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1 V.4 1 PWM PWMduty デューティ cycle 1% 1% (min -1 ) 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% % V min min (%)

133 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA924P4S3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1% 5% % V PWM PWMduty デューティ cycle 1% (min -1 ) V Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 38 min min -1 1 Fan 92 mm sq (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 92± ±.3 Lead リード線 wire AWG26 UL ±.3 92±.5 (1) (4) 25.2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side ø ø ø ± ø ± ± ±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 143

134 Fan mm San Ace 92 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 1 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S912F to S912M S912L41 6. to S924F to +7 4/6 C 9S924M to S924L Other sensor specifications are available as options. Refer to the index (p. 557). Airflow - Static Pressure Characteristics 9S912F41 With pulse sensor 9S912M41 With pulse sensor 9S912L41 With pulse sensor V V V

135 Airflow - Static Pressure Characteristics 9S924F41 With pulse sensor 9S924M41 With pulse sensor 9S924L41 With pulse sensor V 14 V ø4.3±.3 Mounting 取付用穴 hole (4) 25±.5 (4) 92± ±.3 Lead リード線 wire AWG24 UL (1) 82.5±.3 92±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction ø ±.3 ø V V V V Fan 92 mm sq. Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 82.5±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 145

136 Fan mm San Cooler 92 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 1 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A912G /6 C -2 to +6 9A912S A912H41 6 to A912F to +7 9A912M /6 C 9A912L41 7 to A924G to +6 3/6 C 9A924S A924H41 12 to A924F to +7 4/6 C 9A924M A924L41 14 to A948S to to +6 Other sensor specifications are available as options. Refer to the index (p. 547). Airflow - Static Pressure Characteristics 9A912G41 With pulse sensor 9A912S41 With pulse sensor 9A912H41 With pulse sensor V V V

137 Airflow - Static Pressure Characteristics 9A912F41 With pulse sensor 9A912M41 With pulse sensor 9A912L41 With pulse sensor V V V Fan 92 mm sq. 9A924G41 With pulse sensor 9A924S41 With pulse sensor 9A924H41 With pulse sensor A924F41 With pulse sensor 9A924M41 With pulse sensor 9A924L41 With pulse sensor V A948S41 With pulse sensor V 48 V 4.5 V

138 Dimensions (unit: mm) (With ribs) 92± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole 25±.5 (4) (4) Lead リード線 wire AWG24 UL 17 92± ± (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side ø4.5 Outlet side ø ±.3 ø ±.3 ø ± ±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 148

139 Fan mm San Ace 92 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 17 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G912A G912S to G912H to +7 9G912M G924A to +6 9G924S to G924H /6 C 9G924M G948A to +7 9G948S to G948H G948M Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G912A21 With pulse sensor 9G912S21 With pulse sensor 9G912H21 With pulse sensor V V V 149

140 Airflow - Static Pressure Characteristics 9G912M21 With pulse sensor 9G924A21 With pulse sensor 9G924S21 With pulse sensor V V 1.2 V V 4.8 V V V 2.4 V V 4.8 V V 48 V 2.4 V G924H21 With pulse sensor 9G924M21 With pulse sensor 9G948A21 With pulse sensor 4.8 V G948S21 With pulse sensor 9G948H21 With pulse sensor 9G948M21 With pulse sensor V 48 V 4.8 V

141 Dimensions (unit: mm) (With ribs) 92± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL (1) Fan 92 mm sq. 82.5±.3 92±.5 (4) (4) 32±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø ±.3 4-ø ø ± ø ± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 151

142 Fan mm San Ace 92 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 24 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GA912P1H to to /6 C GA924P1H to to +7 (7/4 C) GA948P1H3** to to +7 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 25 min min (%) 152

143 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA924P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 97 min min -1 1 (%) Fan 92 mm sq. 9GA948P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM PWMduty デューティ cycle 1% (min -1 ) 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 97 min PWM デューティ 1% 5% V 48 V 4.8 V (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL ± ± (1) 82.5±.3 92±.5 (4) 38±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 153

144 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 82.5±.3 4-ø4.5 Outlet side 82.5±.3 4-ø4.5 ø13 ø ± ± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 154

145 Fan mm San Ace 92 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 25 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] HV912P1G to /6 C -2 to (7/4 C) 9HV948P1G to * PWM frequency: 25 khz Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV912P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) (Pa) % V PWM デューティ 1% 5% (inch H2O) (Pa) PWM duty デューティ cycle 1% 12.6 V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min (%) 9HV948P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 6 V 48 V V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 149 min -1 1 (%) 155

146 Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 92± ø ø ø ± ø ± ± (1) 82.5±.3 92±.5 Lead リード線 wire AWG22 UL 3266 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5± ±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 156

147 Fan mm San Ace 92 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 25 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GV912P1G3 9GV912P1H3 9GV912P1F3 9GV948P1H3 9GV948P1F3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to to to +7 4/6 C to to to Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV912P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM duty デューティ cycle 1% % 5% PWM PWMduty デューティ cycle 1% 13.2 V V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 min min (%) 157

148 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV912P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 85 min min -1 1 (%) 9GV912P1F3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 22 min -1 1 (%) 7 min -1 9GV948P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 85 min -1 4 min -1 1 (%) 9GV948P1F3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % VV PWM デューティ 1% PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%)

149 Dimensions (unit: mm) (With ribs) 92± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL Fan 92 mm sq. (1) 82.5±.3 (4) 38±.5 (4) 92±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø ±.3 4-ø4.5 ø13 ø ± ± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 159

150 Fan mm San Ace 92 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 18 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G912G to G912H to +6 9G924G to G924H /6 C 9G948J to +7 9G948G to to +6 9G948H Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G912G11 With pulse sensor 9G912H11 With pulse sensor 9G924G11 With pulse sensor V V V

151 Airflow - Static Pressure Characteristics 9G924H11 With pulse sensor 9G948J11 With pulse sensor 9G948G11 With pulse sensor V 2.4 V G948H11 With pulse sensor 48 V 4.8 V V 48 V 4.8 V V 48 V 4.8 V Fan 92 mm sq. Dimensions (unit: mm) (With ribs) 92± ±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL (1) 82.5±.3 92±.5 (4) 38±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 161

152 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø ±.3 4-ø4.5 ø13 ø ± ± Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 162

153 Fan mm San Ace 12 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 14 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S1212H41 5. to to +6 9S1212F41 5. to /6 C -1 to +7 9S1212M41 6. to S1212L41 7. to S1224M to Other sensor specifications are available as options. Refer to the index (pp. 557 to 558). Airflow - Static Pressure Characteristics 9S1212H41 With pulse sensor 9S1212F41 With pulse sensor 9S1212M41 With pulse sensor V 5 V V V

154 Airflow - Static Pressure Characteristics 9S1212L41 With pulse sensor 9S1224M41 With pulse sensor V V 26.4 V ø4.3±.3 Mounting 取付用穴 hole 119± ±.3 Lead リード線 wire AWG24 UL ±.3 119± (1) (5) (5) Rotating 回転方向 direction Airflow 風吹出方向 direction 14.8±.3 4-ø ±.3 4-ø ø ± ø ± Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 164

155 Fan mm San Ace 12 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 28 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA1212P4G1 9GA1212P4S1 9GA1224P4G1 9GA1224P4S1 9GA1248P4G1 9GA1248P4S1 Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to /6 C -2 to (7/4 C) to * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA1212G to GA1212S GA1224G /6 C to to +7 9GA1224S (7/4 C) 9GA1248G to 53 9GA1248S Other sensor specifications are available as options. Refer to the index (p. 553). 165

156 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA1212P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% 25% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min (%) 9GA1212P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% 25% PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 54 min (%) 9GA1224P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% 25% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min (%) 9GA1224P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% 25% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 54 min (%)

157 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA1248P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM デューティ 1% 5% 25% 48 VV PWM デューティ 1% 5% 25% GA1248P4S1 With pulse sensor with PWM control function PWM PWMduty デューティ cycle 1% 53 V 48 V 4.8 V PWM PWMduty デューティ cycle 1% 53 V 48 V 4.8 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 1 (%) 64 min -1 PWM PWM duty - Speed characteristics example Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz (%) 54 min -1 Fan 12 mm sq. 9GA1212G41 With pulse sensor 9GA1212S41 With pulse sensor 9GA1224G41 With pulse sensor V V V GA1224S41 With pulse sensor 9GA1248G41 With pulse sensor 9GA1248S41 With pulse sensor V V V V V 48 V 36 V

158 Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø4.5±.3 Mounting 取付用穴 hole 25.4±.5 (5) (5) 12± ± (1) 14.8±.3 12±.8 Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø ±.3 4-ø4.5 ø127 ø ± ±.3 Outlet side Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 168

159 Fan mm San Ace 12 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 26 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV1212P4G to GV1224P4G to GV1248P4J1 4.8 to to +7 4/6 C GV1248P4G to GV1248P4H * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) 169

160 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1224P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 :24 V PWM 周波数 frequency: :25 khz 25 khz % 5% % 2 PWM デューティ 1% 5% PWM デューティ 1% VV 9GV1248P4J1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% 55.2 V 48 V 2.4 V 4.8 V 5 51 min min (%) PWM duty - Speed characteristics example Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 54 min min (%) 9GV1248P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM デューティ 1% 5% % PWM PWM duty デューティ cycle 1% 6 V 48 V 4.8 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 165 min min (%) 9GV1248P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) 1.2 (Pa) VV (inch H2O) 1.2 (Pa) 3 PWM PWM duty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 :48 V V PWM PWM frequency: 周波数 :25 khz 25 khz % 5% PWM デューティ 1% V 48 V 4.8 V min min (%)

161 Dimensions (unit: mm) (With ribs) 12± ±.3 4-ø4.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL (1) 25.4±.5 (5) (5) Fan 12 mm sq. 14.8±.3 12±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 14.8±.3 4-ø ±.3 4-ø ø ± ø ± Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 171

162 Fan mm San Ace 12 9G type Model 9G1212B41 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 24 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G1212G G1212E to G1212A G1212H to G1212F to G1212M G1212B to G1224G G1224E to G1224A to +7 4/6 C 24 9G1224H41 12 to G1224F to G1224M G1248G G1248E G1248A to G1248H G1248F G1248M Other sensor specifications are available as options. Refer to the index (pp. 549 to 551). Airflow - Static Pressure Characteristics 9G1212G41 With pulse sensor 9G1212E41 With pulse sensor 9G1212A41 With pulse sensor V V V

163 Airflow - Static Pressure Characteristics 9G1212H41 With pulse sensor 9G1212F41 With pulse sensor 9G1212M41 With pulse sensor V V V Fan 12 mm sq. 9G1212B41 With pulse sensor 9G1224G41 With pulse sensor 9G1224E41 With pulse sensor V V V G1224A41 With pulse sensor 9G1224H41 With pulse sensor 9G1224F41 With pulse sensor V V G1224M41 With pulse sensor 9G1248G41 With pulse sensor 9G1248E41 With pulse sensor V V 48 V 4.8 V V 48 V 4.8 V

164 Airflow - Static Pressure Characteristics 9G1248A41 With pulse sensor 9G1248H41 With pulse sensor 9G1248F41 With pulse sensor V 48 V 4.8 V V 48 V 4.8 V V 48 V 4.8 V G1248M41 With pulse sensor V 48 V 4.8 V Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 取付用穴 Mounting hole 119± ± リード線 Lead wire AWG24 UL 17 (1) 14.8±.3 119±.5 (5) (5) Rotating 回転方向 direction Airflow 風吹出方向 direction 174

165 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side ±.3 4-ø4.5 ø ± ±.3 4-ø4.5 ø ±.3 Fan 12 mm sq Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 175

166 Fan mm San Ace 12 9HV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 46 g Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] HV1224P1A to /6 C 9HV1248P1G1-2 to (7/4 C) to HV1248P1H * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV1224P1A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 38 min min (%) 176

167 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV1248P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 48 VV PWM デューティ 1% 5% PWM PWM duty デューティ cycle 1% 1% 48 V 6 V 36 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 115 min min -1 1 (%) Fan 12 mm sq. 9HV1248P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 6 V 36 V 48 V Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz (min -1 ) 1 1 min min (%) Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 12± ± ±.3 12±.8 (1) Lead リード線 wire AWG24 UL ±.3 3.5±.3 38±.5 6.5±.3 3.5±.3 Rotating 回転方向 direction AWG22 UL 3266 ((Model 型番 :9HV1224P1A1 no.: のみ only) ) Airflow 風吹出方向 direction 177

168 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 14.8±.3 4-ø ø ± Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 178

169 Fan mm San Ace 12 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 36 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] GV1212P1J to GV1212P1G to +7 4/6 C 9GV1224P1J1** to GV1224P1H1** GV1248P1J to * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 15 min -1 1 (%) 64 min

170 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM PWMduty デューティ cycle 1% (min -1 ) 7 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz % PWM デューティ 1% 5% V min min (%) 9GV1224P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min (%) 9GV1224P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz PWM デューティ 1% 5% V min (%) 9GV1248P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 1 2 5% 3 48 V V PWM デューティ 1% PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 64 min min -1 1 (%)

171 Dimensions (unit: mm) (With ribs) 12± ±.3 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL Fan 12 mm sq. (1) 14.8±.3 12±.8 (5) 38±.5 (5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 14.8±.3 4-ø ±.3 4-ø ø ± ø ± Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 181

172 Fan mm San Ace 12 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 33 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G1212G to G1212E G1212H G1212F11 7 to G1212M G1224G to G1224E G1224H to +7 4/6 C 9G1224F11 14 to G1224M G1248G G1248E G1248H to G1248F G1248M Other sensor specifications are available as options. Refer to the index (pp. 549 to 55). Airflow - Static Pressure Characteristics 9G1212G11 With pulse sensor 9G1212E11 With pulse sensor 9G1212H11 With pulse sensor V V V

173 Airflow - Static Pressure Characteristics 9G1212F11 With pulse sensor 9G1212M11 With pulse sensor 9G1224G11 With pulse sensor V V V Fan 12 mm sq. 9G1224E11 With pulse sensor 9G1224H11 With pulse sensor 9G1224F11 With pulse sensor V V V G1224M11 With pulse sensor 9G1248G11 With pulse sensor 9G1248E11 With pulse sensor V V 48 V 4.8 V V 48 V V G1248H11 With pulse sensor 9G1248F11 With pulse sensor 9G1248M11 With pulse sensor V V V V 48 V 4.8 V V 5 48 V V

174 Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole 119± ±.3 (1) +3 3 Lead リード線 wire AWG24 UL ±.3 119±.8 (5) 38±.5 (5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø4.5 Outlet side 14.8±.3 4-ø ø ± ø ± Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 184

175 Fan mm San Ace 12 9SG type Model 9SG1224H11 is not certified. General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 4 g Fan 12 mm sq. Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9SG1212G to SG1224G to SG1224H SG1248G to Other sensor specifications are available as options. Refer to the index (p. 558). -2 to +7 4/6 C Airflow - Static Pressure Characteristics 9SG1212G11 With pulse sensor 9SG1224G11 With pulse sensor 9SG1224H11 With pulse sensor V V V SG1248G11 With pulse sensor V V V

176 Dimensions (unit: mm) 8-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 12± ±.3 AWG22 UL 143 ((Model 型番 :9SG1212G11 no.: のみ only) ) +3 3 (1) 14.8±.3 12±.8 6.5±.3 6.5±.3 (3.5) (3.5) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø4.5 Outlet side 14.8±.3 4-ø ø ± ø ± Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 186

177 Fan mm San Ace 127 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 35 g Fan 127 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P1312S to P1312H P1324S to P1324H P1348S to P1348H to +6 4/6 C Other sensor specifications are available as options. Refer to the index (pp. 544 to 545). Airflow - Static Pressure Characteristics 19P1312S11 With pulse sensor 19P1312H11 With pulse sensor 19P1324S11 With pulse sensor V V V

178 Airflow - Static Pressure Characteristics 19P1324H11 With pulse sensor 19P1348S11 With pulse sensor 19P1348H11 With pulse sensor V V 48 V 4.8 V V 48 V 4.8 V ø4.3±.3 Mounting 取付用穴 hole (1) ± ±.3 Lead リード線 wire AWG24 UL ±.3 127±.8 Rotating 回転方向 direction (6) (6) 38±.5 Airflow 風吹出方向 direction 113.3±.3 4-ø ±.3 4-ø4.3 ø ± ø ± Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 123 Options Finger guards page: p. 514 Model no.: ,

179 Fan mm San Ace 127 9E type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 4 g Fan 127 mm sq. Specifications The models listed below have pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E1312A to to +7 6/6 C 19E1312S E1324G to +6 4/6 C 19E1324A to to +7 6/6 C 19E1324S E1348G to +6 4/6 C 19E1348A to to +7 6/6 C 19E1348S Other sensor specifications are available as options. Refer to the index (p. 542). Airflow - Static Pressure Characteristics 19E1312A11 With pulse sensor 19E1312S11 With pulse sensor 19E1324G11 With pulse sensor V V V

180 Airflow - Static Pressure Characteristics 19E1324A11 With pulse sensor 19E1324S11 With pulse sensor 19E1348G11 With pulse sensor V V V 48 V 4.8 V E1348A11 With pulse sensor 19E1348S11 With pulse sensor V V V V 48 V 4.8 V Dimensions (unit: mm) 8-ø4.3±.3 Mounting 取付用穴 hole (1) 127± ± Lead リード線 wire AWG24 UL ±.3 127±.8 6±.3 38±.5 6±.3 Rotating 回転方向 direction Airflow 風吹出方向 direction 19

181 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 113.3±.3 4-ø ±.3 4-ø4.3 ø ± ø ±.3 Fan 127 mm sq. 123 Options Finger guards page: p. 514 Model no.: ,

182 Fan mm San Ace 14 9GV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 63 g Specifications The models listed below have pulse sensors with PWM control function. Model no. 9GV1412P1G1 9GV1412P1S1 9GV1412P1H1 9GV1424P1G1 9GV1424P1S1 9GV1424P1H1 9GV1448P1G1 9GV1448P1S1 9GV1448P1H1 Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] to to to +7 4/6 C to * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1412P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 V PWM デューティ 1% % Voltage: 電圧 : V (Pa) (min -1 ) PWM PWMduty デューティ cycle 1% PWM 周波数 frequency: :25 khz 25 khz V 76 min V (inch H2O) (%) 192

183 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1412P1S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example PWM デューティ 1% 2% % V V PWM デューティ 1% PWM デューティ 1% 2% PWM デューティ 1% 2% V V GV1412P1H1 With pulse sensor with PWM control function PWM 9GV1424P1G1 With pulse sensor with PWM control function PWM 9GV1424P1S1 With pulse sensor with PWM control function PWM PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) (min -1 ) (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz min -1 PWM duty - Speed characteristics example (%) 52 min -1 PWM duty - Speed characteristics example (%) 76 min -1 PWM duty - Speed characteristics example (%) 665 min -1 (%) 193 Fan 14 mm sq.

184 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1424P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 静圧 Static 静圧 Static pressure pressure % 48 VV PWM デューティ 1% PWM デューティ 1% 2% 48 VV PWM デューティ 1% 2% PWM デューティ 1% 2% V VV GV1448P1G1 With pulse sensor with PWM control function PWM 9GV1448P1S1 With pulse sensor with PWM control function PWM 9GV1448P1H1 With pulse sensor with PWM control function PWM Voltage: 電圧 :48 V V (Pa) (min -1 ) PWM PWMduty デューティ cycle 1% PWM 周波数 frequency: :25 khz 25 khz min V V V (%) (inch H2O) PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V PWM PWMduty デューティ cycle 1% 6 V 48 V 36 V PWM PWMduty デューティ cycle 1% 6 V 48 V 36 V (min -1 ) (min -1 ) Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 1 52 min -1 PWM duty - Speed characteristics example PWM duty - Speed characteristics example (%) 665 min -1 PWM duty - Speed characteristics example (%) 52 min -1 (%)

185 Dimensions (unit: mm) 14± ±.5 8-ø4.5±.3 Mounting 取付用穴 hole 124.5±.5 14± (1) Lead リード線 wire Rated 定格電圧 voltage 12 ファン V fan AWG2 UL 3266 Rated 定格電圧 voltage /48 /48 V ファン V fan AWG22 UL ±.2 4±.2 6±.4 6±.4 38±.5 Fan 14 mm sq. Rotating 回転方向 direction Airflow 風吹出方向 direction 124.5±.3 4-ø ±.3 4-ø4.5 ø147 ø ± ±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side Options Finger guards page: p. 514 Model no.: , H 195

186 Fan mm San Ace 14 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P1412H to P1412M P1424H to P1424M P1448H to P1448M to +7 4/6 C Other sensor specifications are available as options. Refer to the index (p. 545). Airflow - Static Pressure Characteristics 19P1412H11 With pulse sensor 19P1412M11 With pulse sensor 19P1424H11 With pulse sensor V V V

187 Airflow - Static Pressure Characteristics 19P1424M11 With pulse sensor 19P1448H11 With pulse sensor 19P1448M11 With pulse sensor V V 48 V 4.8 V V ø4.3±.3 Mounting 取付用穴 hole (1) 38±.5 14± ± Lead リード線 wire AWG24 UL ±.5 14±.8 (5) (5) Rotating 回転方向 direction Airflow 風吹出方向 direction 124.5±.3 4-ø ±.3 4-ø ø ± ø ±.3 48 V 4.8 V Fan 14 mm sq Dimensions (unit: mm) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side Options Finger guards page: p. 514 Model no.: , H 197

188 Fan mm San Ace 15 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV1512H to GV1512M to +7 4/6 C 9GV1524M to Other sensor specifications are available as options. Refer to the index (pp. 555 to 556). Airflow - Static Pressure Characteristics 9GV1512H51 With pulse sensor 9GV1512M51 With pulse sensor 9GV1524M51 With pulse sensor V V V

189 Dimensions (unit: mm) (With ribs) 15±.8 135±.5 4-ø4.5±.3 Mounting 取付用穴 hole (1) +3 3 Lead リード線 wire AWG22 UL 143 Fan 15 mm sq. 135±.5 15±.8 (6.5) 5±.5 (6.5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 4-ø4.5 4-ø4.5 ø162 ø ±.5 135±.3 148±.5 135±.3 Outlet side 135±.3 148±.5 135±.3 148±.5 Options Finger guards page: p. 514 Model no.: ,

190 Fan ø mm San Ace 172 9E type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 5 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E4712M to E4712L E4724H E4724F to E4724M E4724L to +6 4/6 C 19E4748S E4748H E4748F to E4748M E4748L Other sensor specifications are available as options. Refer to the index (pp. 542 to 543). Airflow - Static Pressure Characteristics 19E4712M41 With pulse sensor 19E4712L41 With pulse sensor 19E4724H41 With pulse sensor V V V

191 Airflow - Static Pressure Characteristics 19E4724F41 With pulse sensor 19E4724M41 With pulse sensor 19E4724L41 With pulse sensor V V V Fan ø 172 mm 19E4748S41 With pulse sensor 19E4748H41 With pulse sensor 19E4748F41 With pulse sensor V 48 V 4.8 V V 48 V V V 48 V V E4748M41 With pulse sensor 19E4748L41 With pulse sensor V V V V V V

192 Dimensions (unit: mm) 8-ø4.5±.4 Mounting 取付用穴 hole +5 3 ø172±.8 ø162±.5 (1) Lead リード線 wire AWG24 UL ± ±.4 7.5± ±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side ø ±.5 4-R4.25 ø Options Finger guards page: p. 515 Model no.: E, H,

193 Fan ø mm San Ace 172 9HV type General Specifications Sidecut type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 8 g Fan ø 172 mm Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] HV5724P5H to /6 C -2 to /4 C 9HV5748P5G to * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV5724P5H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% 2% PWM PWMduty デューティ cycle 1% 3 V 16 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 8 min (%) 23

194 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV5748P5G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM デューティ 1% PWM PWMduty デューティ cycle 1% 1% 72 V 48 V (min -1 ) 12 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 15 min % 2% ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162± Lead リード線 wire AWG18 UL ± ±.4 51±.8 7.5±.4 Rotating 回転方向 direction Airflow 風吹出方向 direction ø ± V (%) Dimensions (unit: mm) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side ø168 4-R Options Finger guards page: p. 515 Model no.: J, E, H,

195 Fan ø mm San Ace 172 9SG type General Specifications Sidecut type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 76 g Fan ø 172 mm Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] SG5724P5H to to SG5748P5G1 4/6 C to 72-2 to SG5748P5H * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 558). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9SG5724P5H61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 13 min min (%) 25

196 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9SG5748P5G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV PWM デューティ 1% 5% % PWM PWMduty デューティ cycle 1% 72 V 48 V 36 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 86 min min (%) 9SG5748P5H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example VV 7 6 PWM デューティ 1% % 2 1 % PWM PWMduty デューティ cycle 1% 48 V/72 V 36 V Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz min min (%) Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162± Lead リード線 wire AWG22 UL ±.4 7.5±.4 51±.8 15±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction 26

197 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 162±.5 Inlet side, Outlet side ø4.5 ø168 Fan ø 172 mm 4-R Options Finger guards page: p. 515 Model no.: J, E, H,

198 Fan ø mm San Ace 172 9GV type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 8 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV5724H to GV5748H to Other sensor specifications are available as options. Refer to the index (p. 556). -2 to +7 4/6 C Airflow - Static Pressure Characteristics 9GV5724H51 With pulse sensor 9GV5748H51 With pulse sensor V V 48 V 4.8 V Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162± Lead リード線 wire AWG22 UL ±.4 51±.8 7.5± ±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction

199 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 162±.5 Inlet side, Outlet side ø4.5 ø168 4-R4.25 Fan ø 172 mm Options Finger guards page: p. 515 Model no.: J, E, H,

200 Fan ø mm San Ace 172 9E type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 76 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E5712K E5712Y to +6 19E5712H to E5712F to +7 19E5712M E5724C E5724K E5724H to /6 C -2 to +7 19E5724F E5724M E5748C E5748K to +6 19E5748H to E5748F to +7 19E5748M Other sensor specifications are available as options. Refer to the index (p. 543). Airflow - Static Pressure Characteristics 19E5712K51 With pulse sensor 19E5712Y51 With pulse sensor 19E5712H51 With pulse sensor V V V

201 Airflow - Static Pressure Characteristics 19E5712F51 With pulse sensor 19E5712M51 With pulse sensor 19E5724C51 With pulse sensor V V V Fan ø 172 mm 19E5724K51 With pulse sensor 19E5724H51 With pulse sensor 19E5724F51 With pulse sensor V V V E5724M51 With pulse sensor 19E5748C51 With pulse sensor 19E5748K51 With pulse sensor V V 3 48 V V V 2 48 V V E5748H51 With pulse sensor 19E5748F51 With pulse sensor 19E5748M51 With pulse sensor V V 4.8 V V 48 V V V 48 V 4.8 V

202 Dimensions (unit: mm) 4-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162±.5 15± Lead リード線 wire AWG24 UL 17 または or AWG22 UL ±.4 7.5±.4 51±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 148 ø ±.3 2-R ø4.5 Options Finger guards page: p. 515 Model no.: E, H,

203 Fan ø mm San Ace 172 9E type General Specifications Round type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 78 g Fan ø 172 mm Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E1712K E1712Y to +6 19E1712H to E1712F E1712M E1724C E1724K to +7 19E1724H to /6 C 19E1724F E1724M E1748C E1748K to +6 19E1748H to to +7 19E1748F to +6 19E1748M to +7 Other sensor specifications are available as options. Refer to the index (p. 542). Airflow - Static Pressure Characteristics 19E1712K51 With pulse sensor 19E1712Y51 With pulse sensor 19E1712H51 With pulse sensor V V V

204 Airflow - Static Pressure Characteristics 19E1712F51 With pulse sensor 19E1712M51 With pulse sensor 19E1724C51 With pulse sensor V V V E1724K51 With pulse sensor 19E1724H51 With pulse sensor 19E1724F51 With pulse sensor V V V E1724M51 With pulse sensor 19E1748C51 With pulse sensor 19E1748K51 With pulse sensor V V 3 48 V V V 2 48 V V E1748H51 With pulse sensor 19E1748F51 With pulse sensor 19E1748M51 With pulse sensor V V 4.8 V V 1 48 V 4.8 V V 48 V 4.8 V

205 Dimensions (unit: mm) ø172±.8 162±.5 162±.5 8-ø4.5±.3 Mounting 取付用穴 hole +3 3 (1) Lead リード線 wire AWG24 UL 17 または or AWG22 UL ±.4 51±.8 7.5±.4 Fan ø 172 mm Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 162±.3 162±.3 ø168 4-R ø4.5 Options Finger guards page: p. 515 Model no.: , , E, H,

206 Fan ø 2 7 mm San Ace 2 9GV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 18 g Power on when current is shut off. Do not power on 15 s or more after power off. Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 4/6 C 9GV248PG21** to to +7 (7/4 C) * PWM frequency: 1 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV248PG21 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example % 48 VV PWM デューティ 1% 5% , PWM PWMduty デューティ cycle 1% 48 V 72 V 36 V ,2 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :1 khz 1 khz min (%) 216

207 Dimensions (unit: mm) 22±1 28± ±.5 4-ø4.3±.15 4-ø4.5±.2 Depth 深さ ±3 (1) リード線 Lead wire AWG14 UL 115 ø2±.5 ø2±.5 4-ø4.3±.15 Fan ø 2 mm 188.4±.5 28±.5 22±1 12±.4 12±.4 7±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side ø28±.3 4-ø4.5 ø28±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) ø194 Options Finger guards page: p. 516 Model no.: ,

208 Fan ø 2 7 mm San Ace 2 9EC type Model 9EC248J1 is not certified. General Specifications Material Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 18 g Power on when current is shut off. Do not power on 1 s or more after power off. Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9EC224H to EC248J1 4.8 to EC248A to EC248H1 4.8 to Other sensor specifications are available as options. Refer to the index (p. 548). -2 to +6 4/6 C Airflow - Static Pressure Characteristics 9EC224H1 With pulse sensor 9EC248J1 With pulse sensor 9EC248A1 With pulse sensor V V EC248H1 With pulse sensor V V V V 48 V 4.8 V V 48 V 43 V

209 Dimensions (unit: mm) 22±1 28± ±2 (1) リード線 Lead wire AWG22 UL 17 ø2-1 8-ø4.3±.15 Mounting 皿取付穴内径 hole flat head screw 8-ø4.5±.3 Mounting 取付用穴 hole Fan ø 2 mm ø ±.5 22±1 12± ±.4 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side ø ø4.5 4-ø4.5 8-R2 4-R5 Options Finger guards page: p. 516 Model no.: 19-72, 19-72H, , H 219

210 Finger guards Dimensions (unit: mm) AC 36 mm sq. type 38 mm sq. type 4 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) Nickel-chrome plating (silver) H Cation electropainting (black) Inlet side, Outlet side Inlet side, Outlet side Inlet side, Outlet side 29.5± ø4 4.8 ø ±.5 4-ø4±.3 ø ±.5 ø ±.3 ø1.6 ø ø ±.5 ø15 ø ±.5 ø1.6 ø28.5 ø ø ø mm sq. type 6 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) E Nickel-chrome plating (silver) E Nickel-chrome plating (silver) H Cation electropainting (black) Outlet side Inlet side, Outlet side Inlet side, Outlet side ø ±.3 ø1.6 ø ø ±.3 ø1.6 ø ø53 4.3±.3 ø1.6 ø ø ø59.4 ø59.4 ø7.7 7 mm sq. type 8 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) C Nickel-chrome plating (silver) E Nickel-chrome plating (silver) H Cation electropainting (black) Inlet side, Outlet side Outlet side Inlet side, Outlet side ø ±.3 ø1.6 ø1.6 ø ± ±.3 ø1.6 ø1.6 ø75 ø (ø87) ø11.2 ø ø1.6 ø ø ±.3 ø1.6 ø ø116.6 ø39.8 ø ±.5 4.3±.3 3.5±.3 ø1.6 (ø85) ø77.6 ø1.6 ø1.6 ø1.6 ø ø ± ± Option 92 mm sq. type ø 92 mm type 92 mm sq., ø 1 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-99C Nickel-chrome plating (silver) Nickel-chrome plating (silver) E Nickel-chrome plating (silver) H Cation electropainting (black) Outlet side Impeller side, Nameplate side Inlet side, Outlet side ø ø116.6 ø

211 Options Finger guards Dimensions (unit: mm) AC 12 mm sq. type 127 mm sq., ø 175 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-19C Nickel-chrome plating (silver) 19-19E Nickel-chrome plating (silver) Nickel-chrome plating (silver) H Cation electropainting (black) 19-19K Cation electropainting (black) 4.3±.3 ø42.2 ø148 Outlet side Inlet side, Outlet side Inlet side, Outlet side ø1.6 ø1.6 ø ±.5 ø1.6 ø1.6 ø148 ø ±.3 ø ±.5 ø1.6 ø1.6 ø16.5 ø ø mm sq. type ø 133 mm type ø 136 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) Nickel-chrome plating (silver) 41 Outlet side Inlet side Impeller side, Nameplate side 165±.5 4.3±.2 ø1.6 ø1.6 ø119 (ø6) ±1 ø ±.3 ø1.6 ø1.6 ø16 ø87 3.2±1 133±2 ø1.6 ø1.6 ø ±.3 ø16 12 ø16.5 (ø128) mm sq. type 15 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) Nickel-chrome plating (silver) H Cation electropainting (black) Inlet side, Outlet side Inlet side, Outlet side Outlet side ø ø ø ø ø ø1.6 ø26.8 ø136.2 ø145 ø1.6 ø26.8 ø ø ±.2 ø1.6 ø143.8 (ø62.2) 197.7±.5 ø1.6 ø1.6 ø1.6 ø 15 mm type 16 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) E Nickel-chrome plating (silver) Nickel-chrome plating (silver) H Cation electropainting (black) H Cation electropainting (black) ø136.2 ø1.6 ø128.7 Inlet side ø159.7 ø26.3 ø25.2 ø Inlet side, Outlet side ø1.8 ø159.7 ø ø ø1.8 Outlet side ø97.6 ø111.5 ø1.8 ø184 ø1.8 ø61.7 ø

212 Finger guards Dimensions (unit: mm) AC ø 172 mm Sidecut type Model no. Surface treatment Mass (g) Applicable model no. Finger guard J should be mounted with four holes 9SG57 P5 /9GV57 H51 as in the drawing J Nickel-chrome plating (silver) 65 9CR5748P9G1/9WG5748P5 1 Hexagonal nuts +.5 ø ø1.6 ø147 Inlet side, Outlet side ø ø Finger guards Plain washers Spring washers Screws ø152 Fan ±1 71.3±1 ø 172 mm Sidecut, Round type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Finger guards E, H, and E Nickel-chrome plating (silver) Nickel-chrome plating (silver) 53 should be mounted with two holes as in the H Cation electropainting (black) drawing and do not use any other holes. Inlet side, Outlet side Outlet side ø148 ø ø ø1.6 ø ø1.6 ø1.6 ø62.2 Finger guards Plain washers Hexagonal nuts Spring washers ø152 Screws ø148 ø ø162 Fan ø 172 mm Round type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) 54 ø172 ø1.6 ø148 ø ø ø ø172-1 ø1.6 ø1.6 ø62.2 ø ø152 Option Inlet side, Outlet side Outlet side 515

213 Options Finger guards Dimensions (unit: mm) AC ø 2 mm type Model no. Surface treatment Mass (g) Applicable model no. Model no. Surface treatment Mass (g) Applicable model no Nickel-chrome plating (silver) 1 9GV248PG Nickel-chrome plating (silver) 8 9GV248PG21 Inlet side, Outlet side Outlet side ø1.6 ø182.8 ø28 ø A B ø2-1 ø1.6 ø189.8 ø28 ø (196.3) (ø92.2) B A Section 断面 AA AA Section 断面 BB BB ø 2 mm type Model no. Surface treatment Mass (g) Applicable model no. Model no. Surface treatment Mass (g) Applicable model no Nickel-chrome plating (silver) 19E Nickel-chrome plating (silver) 19E H Cation electropainting (black) 9EC H Cation electropainting (black) 9EC2 1 Inlet side, Outlet side Outlet side ø171 ø ø ø178 ø ø ø1.6 ø ø ø 221 mm type ø 225 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) H Cation electropainting (black) H Cation electropainting (black) Inlet side Inlet side 25.9±1.5 ø26.8 ø192 ø ø1.6 ø ±1.5 ø1.6 ø1.6 ø ±1 ø18.2 ø ±.3 A ø1.6 ø186.9 B 217.6±1 ø194.1 ø B A 5±.5 Section 断面 AA AA Section 断面 BB BB 516

214 Finger guards Dimensions (unit: mm) AC 27 mm sq. type (for Bracket-mounted Centrifugal Fan) Model no. Surface treatment Mass (g) Finger guard should be mounted with four holes as in the Nickel-chrome plating (silver) 16 drawing. Inlet side ø1.6 ø ±1 ø26.8 ø ±.3 ø2 A ø35.7 ø186.9 B Finger フィンガーガード guard Screws ネジ B 311±1 ø Section 断面 BB A 5±1 Section 断面 AA Fan ファン Mounting example Axial fan Centrifugal fan Hexagonal nuts Finger guard Plain washers Spring washers Screws Inlet nozzle Finger guard Fan Hexagonal nuts Fan Plain washers Spring washers Screws Chassis Option 517

215 Options Inlet nozzle for centrifugal fan and splash proof centrifugal fan Dimensions (unit: mm) Nozzle mounted in fan inlet side to adjust the flow of introduced air. Material: Steel sheet ø 1 mm type ø 133 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Electro nickel plating (silver) Electro nickel plating (silver) H Cation electropainting (black) ø116.6±.5 ø129±1 ø118±.5 ø128±1 ø7±.5 ø85±.5 9 ±1 ( 等配 ) 5±1 (1) 9 ±1 ( 等配 ) 13±1 (1) (Each) 4-ø4.3±.5 (R4.8) (Each) 4-ø4.5±.5 ø 15 mm type ø 175 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Electro nickel plating (silver) Electro nickel plating (silver) H Cation electropainting (black) H Cation electropainting (black) ø128±.5 ø17±1 ø139±1 ø1±.5 ø126±.5 9 ±1 ( 等配 ) 7±1 (1) ø158±.5 14±1 (1) (Each) 4-ø4.5±.5 (R6) O 9 ±1 ( 等配 ) (Each) 4-ø4.5±.5 (R1) ø 221 mm type ø 225 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Electro nickel plating (silver) Electro nickel plating (silver) H Cation electropainting (black) H Cation electropainting (black) ø252±1 6-ø5.5±.5 45 ±1 6 ±1 (Each) 4-ø4.3±.5 21±1 (.8) 118±1 ø155.2±.5 ø223±1 ø21± ±1 (1.5) ø146±.5 ø242±.5 ( 等配 ) ø245±.5 9 ±1 ( (Each) 等配 ) (R22) O 9 ±1 ( 等配 ) (Each) 4-4.5±.5 (R24) 518

216 EMC guards Dimensions (unit: mm) It is a metallic piece that protects materials from the adverse effects of electromagnetic noise sources. It provides electromagnetic shielding. It is attached to the casing of a device by means of the fan fixing screw (s). Ground the devices equipped with an EMC guard. 8 mm sq. type 8 mm sq. type 92 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) Nickel-chrome plating (silver) 15 Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers 19P8* P8* G9* GV8* GA8* G9* 9GV8* 19R8* 9GV9* 9HV8* A8* GA9* 9HVA8* 9GA8* 9GA8* G8* 9GA8* Dimensions of fans (mm) ± ± ± ø1.6 ø1.6 ø ø ø ø43 99 ø11.2 ø11.2 ø mm sq. type ø 172 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Nickel-chrome plating (silver) Nickel-chrome plating (silver) 49 Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers Dimensions of fans (mm) 9G12* 19E47* ø GV12* 19L17* 9GL12* 9GV57* 9G12* 19E17* ø GV12* E57* 9HV12* 9SG57* 9LG12* 4.3±.3 ø ø172-1 ø ø ±.5 ø ø72 ø152 Option ø148 EMC guard attached to a cooling fan 519