TR428_SpinJet.indd

Transcription

1 Tooline Tungaloy eport No. 428-E w w w. t u n g a l o y. c o m Transform the existing machine into a high-speed machine!

2

3 Tooline Productivity quadruples due to spindles that rotate at high speed with coolant pressure.

4 Outstanding productivity on existing machines due to high-speed rotation Coolant pressure rotates the turbine using a unique mechanism and helps small-diameter tools machine at high speed. ong tool life and stable machining Appropriate cutting conditions and reduced heat with coolant jet flow achieve long tool life and stable machining for small-diameter tools. Energy saving kpm TJS40K mm TJS30K mm TJS20K mm Tool diameter: ødc (mm) Tools rotate only with coolant pressure, and the machine spindle is idle while SpinJet is in operation. No. of revolutions: n Operating speed range vs. tool diameter Workpiece material: Steel Cutting speed: Vc = 180 m/min Machine spindle Coolant flow through machine spindle to SpinJet Shaft lock mechanism for tool replacement Precision bearing system Turbine PM wireless transmitter Clamping system Cutting tool Coolant jet flow 4

5 Wireless PM monitoring system SpinJet is equipped with a wireless transmitter that monitors the actual speed of tool rotation during machining. Monitoring range: Up to 5 m from the transmitter 2.4 GHz radio frequency transmission PM monitor PM wireless transmitter Maximum 60,000 PM (when coolant pressure is 4 MPa) TungJet is available in three versions for different tool diameters: 20,000, 30,000, and 40,000 PM (when coolant pressure is 2 MPa). PM is controlled by adjusting the coolant pressure, and the increase in pressure delivers maximum 60,000 PM. ing colour Blue ed Yellow Speed vs. pressure Jet spindle type / n (PM) Coolant pressure 2 MPa 3 MPa 4 MPa Shape TJS20K-E TJS30K-E No. of revolutions: n (PM) Coolant pressure: (MPa) Min. flow rate: (l/min) Max. shank dia: øds (mm) Tool dia: ødc (mm) 40,000 30,000 20,000 TJS40K... TJS30K TJS20K TJS40K-E These are approximate PM values, and they depend on coolant pressure, flow rate, and type. 5

6 Applicable on a wide variety of machines SpinJet is available in several adaptation types. Adaptation types of jet spindles TJS...K BT30/40... TJS...K DIN TJS...K CAT40... TJS...K E32... TJS...K ST20... TJS...K HSK A63... TJS...K C5/6... High-speed machining with remarkable efficiency on all machines Compact and lightweight SpinJet is applicable for turning and machining centers, and lathe machines. Suitable for machines with spindle-through coolant system, spindle rotation up to 15,000 PM, and coolant pressure of at least 2 MPa Turning center Machining center athe machine Applicable on various tool magazines 6

7 Suitable for a wide range of applications SpinJet provides highly efficient machining with various small-diameter tools up to ø6 mm. Milling Grinding Thread milling Chamfering Drilling Engraving High precision, high reliability and long tool life Micro-diameter drills that provide safe and secure operations. Drill diameter: ødc = ø0.1 - ø3.0 mm DSM Solid endmills with long tool life and high reliability Square and ball nose types Small-diameter threading endmills for metric and unified internal threads ow cutting force due to short contact time of tools and workpiece materials, resulting in highprecision threading MTECS 7

8 Jet spindles TJS-E32 ø80 E32 Holder for E32 collet chuck Stock E11SPEX...AA TJS20KE32 ø TJS20KE32 ø TJS30KE32 ø TJS30KE32 ø TJS40KE32 ø TJS40KE32 ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø63 15 Max. tool diameter ødc Weight (kg) Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option G2.5 40,000 PM TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation Built-in E32 collet chuck TJS...K-E32/ E32 mounting nut E32 collet chuck holder Options of SpinJet adaptation with E32 BT DIN69871 CAT HSK A63 PSC E32 8

9 TJS-BT Holder with BT shank SS E11SPEX...AA G2.5 40,000 PM ø80 15 Stock Weight (kg) SS Max. tool dia. ødc TJS20KBT30 BT ø TJS20KBT30 BT ø TJS30KBT30 BT ø TJS30 BT30 BT ø TJS40KBT30 BT ø TJS40KBT30 BT ø TJS20KBT40 BT ø TJS20KBT40 BT ø TJS30KBT40 BT ø TJS30KBT40 BT ø TJS40KBT40 BT ø TJS40KBT40 BT ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø63 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation TJS-HSK A63 HSKA63 (DIN69893) Holder with HSK A63 shank E11SPEX...AA G2.5 40,000 PM ø Stock Max. tool diameter ødc Weight (kg) TJS20KHSKA63 ø TJS20KHSKA63 ø TJS30KHSKA63 ø TJS30KHSKA63 ø TJS40KHSKA63 ø TJS40KHSKA63 ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø63 15 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation 9

10 TJS-C Holder with PSC shank TungCap PSC E11SPEX...AA G2.5 40,000 PM ø80 ø63 Stock TungCap PSC Max. tool dia. ødc Weight (kg) TJS20KC5 C5 104 ø TJS20KC5 C5 104 ø TJS30KC5 C5 104 ø TJS30KC5 C5 104 ø TJS40KC5 C5 104 ø TJS40KC5 C5 104 ø TJS20KC6 C6 106 ø TJS20KC6 C6 106 ø TJS30KC6 C6 106 ø TJS30KC6 C6 106 ø TJS40KC6 C6 106 ø TJS40KC6 C6 106 ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min 15 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation TJS-ST ø20h6 Holder with straight shank E11SPEX...AA G2.5 40,000 PM ø Stock Max. tool diameter ødc Weight (kg) TJS20KST20 ø TJS20KST20 ø TJS30KST20 ø TJS30KST20 ø TJS40KST20 ø TJS40KST20 ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø63 15 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation 10

11 TJS-CAT Holder with CAT40 shank ø3.15 CAT Stock Dimensions (in) Max. tool diameter ødc Weight (bs) TJS20KCAT40 ø TJS20KCAT40 ø TJS30KCAT40 ø TJS30KCAT40 ø TJS40KCAT40 ø TJS40KCAT40 ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø2.48 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option G2.5 40,000 PM TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation TJS-DIN69871 Holder with DIN69871 shank DIN ø Stock Max. tool diameter ødc Weight (kg) TJS20KDIN ø TJS20KDIN ø TJS30KDIN ø TJS30KDIN ø TJS40KDIN ø TJS40KDIN ø Max. tool shank diameter: ø6.0 mm Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min ø63 15 Parts Descriptions Display* Nut Wrench for nut Wrench for setting *Option G2.5 40,000 PM TJSTSDDISPAY NUTE11GHS WENCHE11SMS WENCHDIA3.2X45 Direction of tool rotation 11

12 Accessaries for spindles E-SP-AA E11 collets SS min ød2 max HC N Stock SS ød2 min ød2 max E11SP0.5-1AA E E11SP1-2AA E E11SP2-3AA E E11SP3-4AA E E11SP4-5AA E E11SP5-6AA E E11SP6-7AA E AA mm TJS TSD DISPAY Wireless PM speed display TJSTSDDISPAY IND E11 TOO ADAPTE E-SK shrink collet adapter for induction heating device ø19.9 ø33.2 INDE11TOOADAPTE 12

13 E-SK Thermal shrink chucks with an integral E collets SS min 4º ød2 ød HC 100 N5 ød2 A A Stock SS d2 1 min D2 D1 E11SK3X10 E E11SK3X25 E E11SK4X10 E E11SK4X25 E For carbide tools only Spring collet Shrink collet ong shrink collet +10 mm +15 mm Nut and wrench for collets B øa B C Wrench NUTE11GHS M13X0.75 WENCHE11SMS ø3.2 mm C øa Wrench for setting 45 mm WENCHDIA3.2x45 13

14 Coated solid carbide endmills TEC 2-flutes, 30 -helix, square type for rib processing < HC65 ødc ød1 15 øds h6 2 Grade AH750 ødc ød1 øds r r2 TEC004A2-006/02C4M TEC004A2-006/04C4M TEC005A2-007/02C4M TEC005A2-007/04C4M TEC005A2-007/06C4M TEC006A2-009/02C4M TEC006A2-009/04C4M TEC006A2-009/06C4M TEC007A2-010/02C4M TEC007A2-010/04C4M TEC007A2-010/06C4M TEC008A2-012/04C4M TEC008A2-012/06C4M TEC008A2-012/08C4M TEC009A2-0135/06C4M TEC009A2-0135/08C4M TEC009A2-0135/10C4M TEC010A2-015/04C4M TEC010A2-015/06C4M TEC010A2-015/08C4M TEC010A2-015/10C4M TEC010A2-015/12C4M TEC010A2-015/16C4M TEC012A2-018/06C4M TEC012A2-018/08C4M TEC012A2-018/10C4M TEC012A2-018/12C4M TEC012A2-018/16C4M TEC014A2-021/06C4M TEC014A2-021/08C4M TEC014A2-021/10C4M TEC014A2-021/12C4M TEC014A2-021/16C4M TEC015A2-023/06C4M TEC015A2-023/08C4M TEC015A2-023/10C4M TEC015A2-023/12C4M TEC015A2-023/16C4M

15 Grade AH750 ødc ød1 øds r r2 TEC015A2-023/18C4M TEC015A2-023/20C4M TEC016A2-024/06C4M TEC016A2-024/08C4M TEC016A2-024/10C4M TEC016A2-024/12C4M TEC016A2-024/16C4M TEC016A2-024/18C4M TEC016A2-024/20C4M TEC016A2-024/26C4M TEC018A2-027/06C4M TEC018A2-027/08C4M TEC018A2-027/10C4M TEC018A2-027/12C4M TEC018A2-027/16C4M TEC018A2-027/18C4M TEC018A2-027/20C4M TEC020A2-030/06C4M TEC020A2-030/08C4M TEC020A2-030/10C4M TEC020A2-030/12C4M TEC020A2-030/16C4M TEC020A2-030/20C4M TEC020A2-030/30C4M TEC025A2-037/08C4M TEC025A2-037/10C4M TEC025A2-037/12C4M TEC025A2-037/16C4M TEC025A2-037/20C4M TEC025A2-037/30C4M TEC030A2-045/08C6M TEC030A2-045/10C6M TEC030A2-045/12C6M TEC030A2-045/16C6M TEC030A2-045/20C6M TEC030A2-045/30C6M TEC030A2-045/40C6M

16 TEB 2-flutes, 30 -helix, ball nose type for rib processing < HC65 Grade AH750 ødc ød1 øds r r2 TEB004A2-006/02C4M TEB004A2-006/03C4M TEB005A2-007/02C4M TEB005A2-007/04C4M TEB005A2-007/06C4M TEB006A2-009/02C4M TEB006A2-009/04C4M TEB006A2-009/06C4M TEB008A2-012/04C4M TEB008A2-012/06C4M TEB008A2-012/08C4M TEB010A2-015/04C4M TEB010A2-015/06C4M TEB010A2-015/08C4M TEB010A2-015/10C4M TEB010A2-015/12C4M TEB010A2-015/16C4M TEB012A2-018/08C4M TEB012A2-018/12C4M TEB014A2-021/08C4M TEB014A2-021/12C4M TEB014A2-021/16C4M TEB015A2-023/06C4M TEB015A2-023/08C4M TEB015A2-023/10C4M TEB015A2-023/12C4M TEB015A2-023/16C4M TEB015A2-023/20C4M TEB016A2-024/08C4M TEB016A2-024/12C4M TEB016A2-024/16C4M TEB016A2-024/20C4M TEB018A2-027/08C4M TEB018A2-027/12C4M TEB018A2-027/16C4M TEB018A2-027/20C4M TEB020A2-030/06C4M TEB020A2-030/10C4M

17 Grade AH750 ødc ød1 øds r r2 TEB020A2-030/12C4M TEB020A2-030/16C4M TEB020A2-030/20C4M TEB020A2-030/30C4M TEB030A2-045/08C6M TEB030A2-045/10C6M TEB030A2-045/12C6M TEB030A2-045/16C6M TEB030A2-045/20C6M TEB030A2-045/30C6M

18 Coated solid carbide drills DSM For high-speed machining of steel ø ødc 1 Drill dia. /D Stock ødc (mm) r r DSM0010G DSM0011G DSM0012G DSM0013G DSM0014G DSM0015G DSM0016G DSM0017G DSM0018G DSM0019G DSM0020G DSM0021G DSM0022G DSM0023G DSM0024G DSM0025G DSM0026G DSM0027G DSM0028G DSM0029G DSM0030G DSM0031G DSM0032G DSM0033G DSM0034G DSM0035G DSM0036G DSM0037G DSM0038G DSM0039G DSM0040G DSM0041G DSM0042G DSM0043G DSM0044G DSM0045G DSM0046G DSM0047G Drill dia. /D Stock ødc (mm) r r DSM0048G DSM0049G DSM0050G DSM0051G DSM0052G DSM0053G DSM0054G DSM0055G DSM0056G DSM0057G DSM0058G DSM0059G DSM0060G DSM0061G DSM0062G DSM0063G DSM0064G DSM0065G DSM0066G DSM0067G DSM0068G DSM0069G DSM0070G DSM0071G DSM0072G DSM0073G DSM0074G DSM0075G DSM0076G DSM0077G DSM0078G DSM0079G DSM0080G DSM0081G DSM0082G DSM0083G DSM0084G DSM0085G Stocked items 18

19 Drill dia. /D Stock ødc (mm) r r DSM0086G DSM0087G DSM0088G DSM0089G DSM0090G DSM0091G DSM0092G DSM0093G DSM0094G DSM0095G DSM0096G DSM0097G DSM0098G DSM0099G DSM0100G DSM0101G DSM0102G DSM0103G DSM0104G DSM0105G DSM0106G DSM0107G DSM0108G DSM0109G DSM0110G DSM0111G DSM0112G DSM0113G DSM0114G DSM0115G DSM0116G DSM0117G DSM0118G DSM0119G DSM0120G DSM0121G DSM0122G DSM0123G DSM0124G DSM0125G DSM0126G DSM0127G DSM0128G DSM0129G DSM0130G DSM0131G Drill dia. /D Stock ødc (mm) r r DSM0132G DSM0133G DSM0134G DSM0135G DSM0136G DSM0137G DSM0138G DSM0139G DSM0140G DSM0141G DSM0142G DSM0143G DSM0144G DSM0145G DSM0146G DSM0147G DSM0148G DSM0149G DSM0150G DSM0151G DSM0152G DSM0153G DSM0154G DSM0155G DSM0156G DSM0157G DSM0158G DSM0159G DSM0160G DSM0161G DSM0162G DSM0163G DSM0164G DSM0165G DSM0166G DSM0167G DSM0168G DSM0169G DSM0170G DSM0171G DSM0172G DSM0173G DSM0174G DSM0175G DSM0176G DSM0177G Stocked items 19

20 ø3.0 ødc Drill dia. /D Stock ødc (mm) r r DSM0178G DSM0179G DSM0180G DSM0181G DSM0182G DSM0183G DSM0184G DSM0185G DSM0186G DSM0187G DSM0188G DSM0189G DSM0190G DSM0191G DSM0192G DSM0193G DSM0194G DSM0195G DSM0196G DSM0197G DSM0198G DSM0199G DSM0200G DSM0201G DSM0202G DSM0203G DSM0204G DSM0205G DSM0206G DSM0207G DSM0208G DSM0209G DSM0210G DSM0211G DSM0212G DSM0213G DSM0214G DSM0215G Drill dia. /D Stock ødc (mm) r r DSM0216G DSM0217G DSM0218G DSM0219G DSM0220G DSM0221G DSM0222G DSM0223G DSM0224G DSM0225G DSM0226G DSM0227G DSM0228G DSM0229G DSM0230G DSM0231G DSM0232G DSM0233G DSM0234G DSM0235G DSM0236G DSM0237G DSM0238G DSM0239G DSM0240G DSM0241G DSM0242G DSM0243G DSM0244G DSM0245G DSM0246G DSM0247G DSM0248G DSM0249G DSM0250G DSM0251G DSM0252G DSM0253G Stocked items 20

21 Drill dia. /D Stock ødc (mm) r r DSM0254G DSM0255G DSM0256G DSM0257G DSM0258G DSM0259G DSM0260G DSM0261G DSM0262G DSM0263G DSM0264G DSM0265G DSM0266G DSM0267G DSM0268G DSM0269G DSM0270G DSM0271G DSM0272G DSM0273G DSM0274G DSM0275G DSM0276G DSM0277G Drill dia. /D Stock ødc (mm) r r DSM0278G DSM0279G DSM0280G DSM0281G DSM0282G DSM0283G DSM0284G DSM0285G DSM0286G DSM0287G DSM0288G DSM0289G DSM0290G DSM0291G DSM0292G DSM0293G DSM0294G DSM0295G DSM0296G DSM0297G DSM0298G DSM0299G DSM0300G DSM-CP Starting drills for GigaMiniDrill Drill dia. Stock ødc (mm) ødc 0.1 ~ 3.0 DSM-CP Drill dia. Stock ødc (mm) ødc 0.1 ~ 3.0 DSM-CP Stocked items 21

22 Small-diameter solid carbide endmills for thread MTECS...ISO For metric internal thread Screw thread Pitch Grade Screw No. of P (mm) AH725 thread flutes øds ødc r MTECS03007C20.25ISO M MTECS03009C30.25ISO M *MTECS03011C40.3ISO M *MTECS03012C50.35ISO M *MTECS03016C60.4ISO M MTECS06016C40.4ISO M MTECS06016C40.4ISO- M *MTECS03017C70.45ISO M MTECS06017C50.45ISO M MTECS0602C50.45ISO M MTECS0602C50.45ISO- M MTECS0602C70.45ISO M MTECS06024C60.5ISO M MTECS06024C60.5ISO- M MTECS06024C90.5ISO M MTECS06024C90.5ISO- M MTECS03024C120.5ISO M MTECS03024C150.5ISO M MTECS06054D200.5ISO M MTECS06028C100.6ISO M MTECS06028C70.6ISO M MTECS06031C120.7ISO M MTECS06031C120.7ISO- M MTECS06031C160.7ISO M MTECS06031C90.7ISO M *Specially designed for dental implant screws 22

23 MTECSH...ISO For metric internal threads, left-hand (M04) Screw thread Pitch Grade Screw No. of P (mm) AH750 thread flutes øds ødc r2 0.3 MTECSH03011C40.3ISO M MTECSH03012C50.35ISO M MTECSH03016C60.4ISO M MTECSH06016C40.4ISO M MTECSH06017C50.45ISO M MTECSH0602C50.45ISO M MTECSH0602C70.45ISO M MTECSH06024C60.5ISO M MTECSH06024C90.5ISO M MTECSH06028C70.6ISO M MTECSH06031C120.7ISO M MTECSH06031C90.7ISO M MTECSH06038C120.8ISO M MTECSH06038C160.8ISO M MTECI...ISO For metric internal threads, single point Pitch Grade Metric screw thread No. of P (mm) AH720 Coarse Fine flutes øds ødc r MTECI03007C30.25ISO M1X MTECI03009C40.25ISO M1.2X0.25 M1.4X0.25, M1.6X MTECI03011C50.3ISO M1.4X MTECI03012C60.35ISO M1.6X0.35 M2X0.35, M2.2X MTECI03016C70.4ISO M2X MTECI03024C100.5ISO M3X0.5 M3.5X0.5, M4X

24 MTECS...UN For unified internal thread Screw thread No. of Grade Unified screw thread No. of threads TPI AH725 Coarse Fine flutes øds ødc r2 80 MTECS03012C880UN MTECS06012C480UN *MTECS03015C672UN MTECS03016C656UN MTECS03016C956UN MTECS03016C1156UN MTECS06016C456UN MTECS06016C656UN MTECS06016C656UN MTECS06019C548UN MTECS03021C840UN MTECS03021C1240UN MTECS06021C840UN MTECS06021C840UN MTECS06024C940UN MTECS06021C640UN MTECS06021C640UN MTECS06024C740UN MTECS06033C936UN MTECS03025C1032UN MTECS03025C1432UN MTECS06025C732UN MTECS06025C732UN MTECS06025C1032UN MTECS06025C1032UN MTECS06032C932UN MTECS06032C932UN MTECS06032C1232UN MTECS06032C1232UN MTECS06037C1032UN MTECS06037C1532UN MTECS06037C1532UN *Specially designed for dental implant screws 24

25 MTECSH...UN For unified internal threads, left-hand (M04) Screw thread No. of Grade Unified screw thread No. of threads TPI AH750 Coarse Fine flutes øds ødc r2 72 MTECSH03015C672UN MTECSH06012C480UN MTECSH06014C364UN MTECSH06016C656UN MTECSH06016C456UN MTECSH06019C548UN MTECSH06021C640UN MTECSH06024C740UN MTECSH06021C840UN MTECSH06024C940UN MTECSH06033C936UN MTECSH06025C732UN MTECSH06025C1032UN MTECSH06032C932UN MTECSH06037C1032UN MTECSH06032C1232UN MTECSH06037C1532UN MTECI...UN For unified internal threads, single point No. of Grade Unified screw thread No. of threads TPI AH720 Coarse Fine flutes øds ødc r2 40 MTECI03021C1040UN MTECI03016C956UN MTECI03015C772UN MTECI03012C580UN

26 Practical examples Workpiece type Holder Endmill Grade Machine parts Electrode TJS30KST20 TJS30KST20 TEB010A2-015/12C4M45 (ø1.0, z = 2) TEB010A2-015/12C4M45 (ø1.0, z = 2) AH750 AH750 SUS303 / X10CrNiS18-9 (25HC) C1100 Cutting conditions Workpiece material Cutting speed: Vc (m/min) No. of revolutions: n (PM) Feed per tooth: fz (mm/t) Depth of cut: ap (mm) Width of cut: ae (mm) Process Coolant Machine esults Workpiece type Holder Endmill Grade Machined parts (piece /hour) ø40 mm 20 mm ,600 30, Grooving Wet Vertical M/C, BT30 Productivity: 4.5! Machine spindle Productivity increased by 4.5 times due to high-speed rotation of 35,600 PM. Tool life is also tripled. Medical equipment Plastic mold TJS30KE32 TJS30KST20 TEB010A2-015/12C4M45 (ø1.0, z = 2) TEB010A2-015/04C4M45 (ø1.0, z = 2) AH750 AH750 Titanium alloys V2 (60HC) mm 30 mm Machine 6 mm Profiling Wet Vertical M/C, BT30 Productivity: 2.3! spindle Productivity increased by 2.3 times due to high-speed rotation of 30,000 PM. Workpiece material 0.05 mm 50 mm Cutting conditions Cutting speed: Vc (m/min) No. of revolutions: n (PM) Feed per tooth: fz (mm/t) Depth of cut: ap (mm) Width of cut: ae (mm) Process Coolant Machine esults ,000 29, Profiling Wet Vertical M/C, BT30 Machine Productivity: 2.5! spindle Productivity increased by 2.5 times due to high-speed rotation of 25,000 PM. Tool life is also extended by 4 times ø80 mm Profiling Wet Vertical M/C, BT30 Machine Productivity: 2.4! spindle Productivity increased by 2.4 times due to high-speed rotation of 29,000 PM. 26

27 27

28 Tungaloy Corporation (Head office) 11-1 Yoshima-Kogyodanchi Iwaki-city, Fukushima, Japan Phone: Fax: Tungaloy America, Inc N Ventura Drive Arlington Heights,I 60004, U.S.A. Phone: Fax: Tungaloy Canada 432 Elgin St. Unit 3 Brantford, Ontario N3S 7P7, Canada Phone: Fax: Tungaloy de Mexico S.A. C os Arellano 113, Parque Industrial Siglo XXI Aguascalientes, AGS, Mexico Phone: Fax: Tungaloy do Brasil Comércio de Ferramentas de Corte tda. ua dos Sabias N Vinhedo, São Paulo, Brazil Phone: Fax: Tungaloy Germany GmbH An der Alten Ziegelei 1 D Monheim, Germany Phone: Fax: Tungaloy France S.A.S. ZA Courtaboeuf - e io 1 rue de la Terre de feu F Courtaboeuf Cedex, France Phone: Fax: Tungaloy Italia S.r.I. Via E. Andolfato 10 I Milano, Italy Phone: Fax: Tungaloy Czech s.r.o. Turanka 115 CZ Brno, Czech epublic Phone: Fax: Tungaloy Ibérica S.. C/Miquel Servet, 43B, Nau 7 Pol. Ind. Bufalvent ES Manresa (BCN), Spain Phone: Fax: Tungaloy Scandinavia AB S:t ars Väg 42A SE und, Sweden Phone: Fax: Tungaloy us, C 36-D Harkovsky ane Belgorod, ussia Phone: Fax: Tungaloy Polska Sp. z o.o. ul. Genewska Warszawa, Poland Phone: Fax: Tungaloy U.K. td The Technology Centre, Wolverhampton Science Park Glaisher Drive, Wolverhampton West Midlands WV10 9U, UK Phone: Fax: [email protected] Tungaloy Hungary Kft Erzsébet királyné útja 125 H-1142Budapest, Hungary Phone: Fax: [email protected] Tungaloy Turkey Dudullu OSB 4. Cad No: Ümraniye Istanbul, TUKEY Phone: Fax: [email protected] Tungaloy Benelux b.v. Tjalk 70 N-2411 NZ Bodegraven, Netherlands Phone: Fax: Tungaloy Croatia Josipa Kozarca Bregana, Croatia Phone: Fax: Tungaloy Cutting Tool (Shanghai) Co.,td. m No 401 No.88 Zhabei Jiangchang No.3 d Shanghai , China Phone: Fax: Tungaloy Cutting Tool (Thailand) Co.,td. TCIF Tower 4th Fl. 1858/5-7 Bangna-Trad oad km.5 Bangna, Bangna, Bangkok Thailand Phone: Fax: Tungaloy Singapore (Pte.), td. 62 Ubi oad 1, #06-11 Oxley BizHub 2 Singapore Phone: Fax: Tungaloy Vietnam Unit 18, 4th Fl. Saigon Centre Building 65 e oi Blvd. Dist 1, Ho Chi Minh City, Vietnam Phone: Fax: Tungaloy India Pvt. td. Unit#13, B wing, 8th Fl. Kamala Mills Compound Trade World, ower Parel (West) Mumbai India Phone: Fax: Tungaloy Korea Co., td #1312, Byucksan Digital Valley 5-cha Beotkkot-ro 244, Geumcheon-gu Seoul, Korea Phone: Fax: Tungaloy Malaysia Sdn Bhd 50 K-2, Kelana Mall, Jalan SS6/14 Kelana Jaya, Petaling Jaya, Selangor Darul Ehsan Malaysia Phone: Fax: Tungaloy Australia Pty td PO Box 2232, owville, Victoria 3178, Australia Phone: Fax: PT. Tungaloy Indonesia Kompleks Grand Wisata Block AA-10 No.3-5 Cibitung Bekasi 17510, Indonesia Phone: Fax: follow us at: facebook.com/tungaloyjapan twitter.com/tungaloyjapan To see this product in action visit: Distributed by: DOWNOAD our App ISO 9001 Certifi ed QC00J0056 Tungaloy Corporation 18/10/1996 ISO Certifi ed EC97J1123 Tungaloy Group Japan site and Asian production site 26/11/1997 Produced from ecycled paper Apr (TJ)