PRODUCT GUIDE ISO Test Method http://www.umgabs.co.jp/
Item Contents Company Profi le List of Trademarks Line-Up & Application Line-Up by Performance Typical Properties & Processing Condition Index This product guide contains trademarks; main grades including typical application; grades classifi ed by performance; physical properties; and processing conditions. The grades contained in this product guide are standard ones. For characteristics and grades not in this product guide, please contact our sales department. Company Profile Company name Capital Shareholders Business Offi ce location Capacity Date of establishment UMG ABS, Ltd. 3 billion yen Ube Industries, Ltd. (42.7%) Mitsubishi Rayon Co., Ltd. (42.7%) General Electric Company (14.6%) ABS resins (Each polymer of ABS, ASA, SAN, and AES and their compound products; alloy products containing other resins) Head offi ce: Tokyo Offi ces: Tokyo, Osaka, Nagoya, Ube Overseas affi liates: Hong Kong, Shanghai Overseas offi ces: Bangkok Plant: Ube, Otake 150,000t (ABS resin polymerization capacity) April 2002 (Established through business consolidation) 1
List of Trademarks Line-Up & Application Japanese Trademark English UMG ABS ABS resin, Reinforced ABS resin Resin type Maleimide-modifi ed high heat ABS resin A TYPE E TYPE S TYPE M TYPE ASA resin (acryl rubber-based) AES resin (EPDM rubber-based) SAS resin (silicon-modifi ed acryl rubber-based) Transparent ASA resin Alloy resin, Reinforced alloy resin (CFRP, etc.) ECO PELLET Recycled resource resin, Plant-based resin (PLA Alloy) UMG WOOD Woodgrain resin UMG AXS RESIN Plastic modifi er Classifi cation General purpose Durable antistatic resistance High fl ow Super high fl ow High gloss Good colorability Fatigue resistance Chemical resistance Foam General injection molded parts General injection molded parts General injection molded parts Large size injection molded parts Typical application Digital camera, Telephone set, LCD TV, Car audio equipment Air conditioner, Automobile interior parts Vacuum cleaner, Automobile interior parts (Door handle, etc.) Refrigerator, Bath components Air conditioner, Furniture PC Extrusion sheet Page Maleimide-modified resin Alloy with engineering plastics AXS/PC resin, AXS/PBT resin Recycled resin, plant-based resin ECO PELLET Environmentally friendly modification AXS resin (ABS-ASA-AES resin) UMG AXS RESIN Plastic modifier ABS resin UMG ABS Recovery of resin characteristics, alloy of plant-based resin Functionalization ASA, SAS, AES resin Weatherability Design,Texture Functionalization Functional ABS resin UMG ABS Plating,, Antistatic, Others Functional ASA, SAS, AES resin Transparent, Low friction, Excellent appearance Wood grain resin, wood powder-filled resin UMG WOOD Resin wood Extrusion ABS Profi le extrusion Profi le extrusion, Foam Vacuum forming V-2 5 VA Non-halogen V-2 Non-halogen V-2, Weatherability Light resistance Chemical resistance Good thermal stability Offi ce equipment Refrigerator inner box Offi ce equipment, Electrical equipment parts PC, Copier machine, Printer AC adapter, Battery charger Printer, Copier machine, Game machine Security equipment (Fire alarm, etc.) Meter cover, Battery case Toilet seat parts Offi ce equipment, Electrical equipment parts 2 3
Line-Up & Application Line-Up & Application Classifi cation Typical application Page Classifi cation Typical application Page Plating Plating parts Automobile exterior parts (door mirror, etc.), Motorcycle exterior parts Plating/Painting Vacuum metalizing, Painting High heat resistance, Plating Automobile exterior parts Cellular phone parts, Automobile interior and exterior parts (emblem, meter ring, etc.) Weatherable SAS Direct vacuum metalizing, Hot plate welding Automobile exterior parts Automobile exterior parts (lamp housing, etc.) Plating, Painting Automobile exterior parts (radiator grill, etc.) Automobile exterior parts, Plating, Painting, High fl ow Automobile exterior parts (radiator grill, etc.) resistance Automobile interior parts Weatherable AES Extrusion, Tractor exterior parts High heat resistance Electrical equipment parts, Automobile interior parts Extrusion, High hardness Super high heat resistance Automobile interior parts Extrusion, Blow molding resistance Automobile interior parts Automobile exterior parts (spoiler, etc.) Automobile exterior parts (wheel cover, etc.) Weatherability, Extrusion High gloss Low gloss, GF 10%, GF 20% Automobile interior parts Offi ce equipment (mechanism parts) Offi ce equipment (mechanism parts) Good weatherability & Excellent appearance Good colorability, Good thermal stability Good colorability, Extrusion Scratch resistance Automobile exterior parts (door mirror, etc.) Automobile exterior parts (door mirror, pillar, etc.) Fiber reinforced ABS, GF 10%, GF 20% Car speaker Car speaker Home appliance parts PC, Copier machine, Printer parts, GF 10% Offi ce equipment (mechanism parts) Low friction Automobile interior parts (cup holder, etc.), GF 20% Offi ce equipment (mechanism parts) High heat, Automobile interior parts Motorcycle exterior parts, Non-halogen antistatic V-2 PC, Copier machine, Printer parts Impact resistance resistance Transparent High fl ow Home appliance parts, Toys Weatherable ASA High fl ow Automobile exterior parts, Automobile exterior parts Plating, Automobile interior parts, Car audio equipment Automobile exterior parts (wheel cap, etc.), Digital camera High heat resistance Automobile exterior parts, Tractor exterior Alloy (PC/ABS) Plating, Plating, High fl ow Automobile interior and exterior parts Automobile exterior parts (radiator grill, etc.) Automobile exterior parts (door mirror, pillar, etc.) High heat resistance Automobile interior parts Non-halogen, PC, Copier machine, Printer 4 5
Line-Up & Application Line-Up by Performance Classifi cation Alloy (PC/ASA) Fiber reinforced alloy (PC/ASA) ECO PELLET High heat resistance CF 10% CF 20%, CF 10%, CF 20%, GF 10% Recycled ABS, Recycled ABS, non-halogen V-2 Recycled PC/ABS V-0 PLA alloys, PLA alloys, high PLA content PLA alloy, non-halogen V-0 Typical application Automobile exterior parts (roof rail, outside antenna cover, etc.) Automobile exterior parts (outside antenna cover, etc.) Cellular phone parts Digital camera Notebook PC, Digital camera Notebook PC, Digital camera Notebook PC General injection molded parts Offi ce equipment Offi ce equipment, Digital camera Cellular phone parts Cellular phone parts Offi ce equipment, Home appliance parts Page Medium impact High fl ow Super high fl ow Decorative Plating Plating, Painting, High fl ow Plating, Painting Vacuum metalizing, Painting Specialty High gloss Good colorability Fatigue resistance Antistatic (V-0) Good thermal stability 5VA Antistatic (V-2) Halogen, standard Non-halogen, standard Extrusion Sheet Profi le extrusion, Profi le extrusion, Foam Profi le extrusion, Foam Vacuum forming Fiber reinforced UMG ABS ABS resin, GF 10%, GF 20%, GF 10%, GF 20% To meet customer requirement, UMG ABS can supply general purpose, decorative, high gloss, fl ame-retardant, extrusion, and fi ber-reinforced grades. The groups of grades in this product guide are standard ones. For characteristics and grades not in this product guide, please contact our sales department. UMG WOOD Non-wood powder High hardness, Non-wood powder Wood powder 5% Wood powder 10% : ASA Medium impact High fl ow Medium impact Excellent appearance: SAS Good colorability, Good thermal stability Chemical resistance Chemical resistance Extrusion High gloss Good colorability AES : ASA, SAS, and AES resins Scratch resistance AES: Low friction (91 C) Non-halogen, Antistatic V-2 AES: Extrusion (90 C) (92 C), Good colorability (95 C) Direct vacuum metalizing, Hot plate welding Transparent High fl ow Scratch resistance High heat resistance(100 C) (weatherable resin ASA, SAS, or AES) is available in good appearance, chemical-resistant, fl ame-retardant, extrusion, transparent, and low-friction grades. Please select the grade to meet your requirements. The weatherability of products shows different trend with the color. We would recommend that you check the trend by an accelerated weatherability. 6 7
Line-Up by Performance Line-Up by Performance Plating, painting, C.V.D. V-2 Halogen V-0 Halogen, Non-halogen, Non-halogen, Weatherability, Low friction Non-halogen, Antistatic, Low friction Good thermal stability 5 VA Extrusion Halogen V-0, Specifi c Antistatic Light resistance Chemical resistance Fiber reinforced ABS (GF 10%) Fiber reinforced ABS (GF 20%) Non-halogen PC/ASA V-0, Fiber reinforced Defl ection temperature under load ( C) GF10% GF 10% CF10% CF 10% CF20% CF 20% ABS resin UMG ABS, ASA, SAS, AES Alloy The fl ame retardant grade is well accepted in the offi ce equipment and IT-related parts. grade is available for each type of materials. To obtain better molded parts, please refer to our technical report. High heat We would recommend that you choose a high heat grade ABS resin for more heat resistance and we recommend an alloy for both heat resistance and impact resistance. In case heat resistance of over 105 C is required, we would recommend to consider the fi ber reinforced resin. Numeric value in brackets shows TDUL(temperature of defl ection under load). Plating : ABS Fiber reinforced High fl ow, Painting Painting (98 C) ABS: Glass fi ber reinforced Flexural modulus (Mpa) ABS, GF 10%, GF 20%, GF 10%, GF 20%, GF 10%, GF 20% Plating : PC alloy (96 C) (98 C) (103 C) Alloy: Glass fi ber reinforced Flexural modulus vs. Defl ection temperature Sheet Profi le extrusion Profi le extrusion, Foam Profi le extrusion, Foam Vacuum forming, GF 10% Defl ection temperature under load ( C) ASA, SAS AES High gloss Good colorability Scratch resistance Painting, Vacuum metalizing Painting, Vacuum metalizing Alloy: Carbon fi ber reinforced Blow molding CF 10% CF 20%, CF 10%, CF 20% UMG WOOD Extrusion grade Non-wood powder Non-wood powder, High hardness Wood powder 5% Wood powder 10% 8 9
Typical Properties & Processing Condition Classification General purpose General purpose Durable antistatic Extrusion ABS Trademark Test method High flow Super high flow High gloss Good colorability Fatigue resistance Chemical resistance Foam Profile extrusion Profile extrusion, Foam Vacuum forming Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 22 Surface resistivity Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. Surface resistivity 10 11
Typical Properties & Processing Condition Classification Plating, painting Plating, painting Trademark Test method V-2 5 VA Non-halogen V-2 Non-halogen V-2, Weatherability Light resistance Chemical resistance Good thermal stability Plating Painting High heat, Plating Plating & Painting Plating & High flow High heat Super high heat Blow Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 22 Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. 12 13
Typical Properties & Processing Condition Classification Fiber reinforced ABS Weatherable ASA Weatherable ASA Weatherable SAS Trademark Test method Low gloss, GF 10%, GF 20%, GF 10%, GF 20%, GF 10%, GF 20% Impact High flow High heat Direct vacuum metalizing, Hot plate welding Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 22 Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. 14 15
Typical Properties & Processing Condition Classification Weatherable AES Weatherability, Extrusion Good weatherability & Excellent appearance Low friction Transparent Trademark Test method Extrusion, Extrusion, High hardness Extrusion, High gloss Good colorability, Good thermal stability Good colorability, Extrusion Scratch resistance High heat, high impact Non-halogen Antistatic V-2 High flow Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 22 Total light transmittance 3mm Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. Total light transmittance 3mm 16 17
Typical Properties & Processing Condition Classification Alloy (PC/ABS) Alloy (PC/ASA) Fiber reinforced alloy (PC/ASA) ECO PELLET Trademark Test method Plating, Plating, Plating, High flow High heat Non-halogen, High heat CF 10% CF 20% Flame retardance, CF 10% Flame retardance, CF 20% Flame retardance, GF 10% Recycled ABS, ECO PELLET Recycled ABS, non-halogen V-2 ECO PELLET Recycled PC/ABS, non-halogen V-0 ECO PELLET PLA alloy, ECO PELLET PLA alloy, High PLA content ECO PELLET Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 22 Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. 18 19
Typical Properties & Processing Condition Index Classification ECO PELLET name See page name See page name See page Trademark Test method PLA alloy, non-halogen V-0 Non-wood powder High hardness, Non-wood powder Wood powder 5% Wood powder 10% ECO PELLET Charpy impact strength Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Rockwell Hardness Temp. of deflection under load Density Melt volume rate Mold Shrinkage Coefficient of linear thermal expansion Flammability See page 23 Properties test conditions (test methods, conditions, units) UL 94, Minimum thickness in mm, Class Numeric values in the table are typical values of natural colors but are not guaranteed ones. Also, the numeric values are subject to change by color. 20 21
Injection Molding Conditions Injection Molding Conditions Drying Conditions Drying Conditions Drying Temp. Drying Temp. Drying Time Drying Time Injection Molding Conditions Injection Molding Conditions Nozzle Temp. Nozzle Temp. Cylinder Temp. (Front) Cylinder Temp. (Front) Cylinder Temp. (Middle) Cylinder Temp. (Middle) Cylinder Temp. (Rear) Cylinder Temp. (Rear) Stock Temp. Stock Temp. Injection Press. Injection Press. Injection Speed Low Low High High Injection Speed Low Low- Screw Rotation Screw Rotation Back Press. Back Press. Mold Temp. Mold Temp. Drying Conditions Drying Conditions Drying Temp. Drying Temp. Drying Time Drying Time Injection Molding Conditions Injection Molding Conditions Nozzle Temp. Nozzle Temp. Cylinder Temp. (Front) Cylinder Temp. (Front) Cylinder Temp. (Middle) Cylinder Temp. (Middle) Cylinder Temp. (Rear) Cylinder Temp. (Rear) Stock Temp. Stock Temp. Injection Press. Injection Press. Injection Speed Low- Low- Low- Low- Injection Speed Low Low- Screw Rotation Screw Rotation Back Press. Back Press. Mold Temp. Mold Temp. 22 23
Notice Numerical values in the tables are typical values of natural colors obtained by prescribed testing methods but are not guaranteed values. The values of colored materials may more or less vary with the type, quantity, and other factors of the pigment used. These values are subject to change in connection with improvements in physical properties. To ensure the safe handling of our products, please read the material safety data sheet (MSDS) in advance. If you need MSDS, please obtain a copy through our sales department. When using with specialized applications, such as for medical equipment, food containers, or toys for infants, please consult us in advance. Information stated in this guide was result obtained under specifi c conditions, but not guaranteed value. We do not guarantee the quality or safety of your products made by any material or any information we provide. Please determine on your own whether or not any of our products fi t your purpose. Also, please take heed of legal control and industrial property, among other factors, that may be relevant to your product.