Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series
Galling No Galling Galling No Galling
Spiral Fluted Tap NEXT
NEW SIZES FROM NEXT
Spiral Fluted Tap FROM P.18 P.20 NEXT
NEW SIZES FROM NEXT
Spiral Fluted Tap FROM P.18 P.20 NEXT
NEW SIZES FROM NEXT
Spiral Fluted Tap NEW SIZES FROM
Spiral Fluted Tap for Threading Large Diameter Holes NEW SIZES OIL HOLE
Spiral Fluted Tap NEW
Spiral Fluted Tap for Threading Large Diameter Holes NEW OIL HOLE
Spiral Fluted Tap NEW
Spiral Fluted Tap with Long Shank NEXT
Spiral Fluted Tap with Long Shank FROM NEXT
FROM
Spiral Fluted Tap (End Mill Shank) NEW SIZES OIL HOLE NEW NEW NEW NEW NEW NEW NEW NEW NEW
Spiral Fluted Tap with Long Shank (End Mill Shank) NEW SIZES
Spiral Pointed Tap P.29 P.32 NEXT
FROM NEXT
Spiral Pointed Tap FROM P.29 P.32 NEXT
FROM NEXT
Spiral Pointed Tap FROM
Spiral Pointed Tap NEW
Spiral Pointed Tap with Long Shank NEXT
FROM NEXT
Spiral Pointed Tap with Long Shank FROM
FROM
Spiral Pointed Tap (End Mill Shank) NEW SIZES OIL HOLE NEW NEW NEW NEW NEW NEW NEW NEW NEW
Spiral Pointed Tap with Long Shank (End Mill Shank) NEW SIZES
Recommended Tapping Conditions
Guide for Icons Tool Materials Powder Metallurgy HSS (CPM) High Vanadium HSS Surface Treatment V (Composite multi-layered) coating OIL HOLE Shank Tolerance for shank diameter Helix Angle Helix angle of flute for taps Appearance Non-Oil Hole With Oil Hole
Straight Shank with Flat Part Length of External Center
OH Limit Ex. M30.5 Ex. M101.5 Ex. M364
Recomennded Drill Holl Size
Standard Offering
High Performance Offering Blind M Basic form P. 7 2.5 M 1.4 M 24 1.5 M 2 M 24 1 M 3 M 12 For Threading large diameter holes M 27 M 56 P.14 Long shank M 2 M 24 P.18 End Mill shank M 3 M 24 P.21 U Basic form No. 4 7/8 P.15 For Threading large diameter holes 1 2 P.16 G For parallel fastening G 1/8 G 1 P.17 INDEX Through M Basic form M 1.4 M 24 P.23 Long shank M 2 M 24 P.29 End Mill shank M 3 M 24 P.33 U Basic form No. 4 7/8 P.28
442-85433-22 (0533)82-1111 FAX (0533)82-1131 143-0025 3-25-4 (03)5709-4501 FAX(03)5709-4515 465-0058 1-9 (052)703-6131 FAX(052)703-7775 550-0013 2-18-2 (06)6538-3880 FAX(06)6538-3879 (022)390-9701 (024)991-7485 (025)286-9503 (0268)28-7381 (0266)58-0152 (0270)40-5855 (028)651-2720 (042)645-5406 (029)354-7017 (03)5709-4501 (046)296-1380 (054)283-6651 (053)461-1121 (0533)92-1501 (0566)77-2366 (052)703-6131 (058)259-6055 (0594)26-0416 (076)268-0830 (077)553-2012 (06)6747-7041 (078)927-8212 (086)241-0411 (087)868-4003 (082)507-1227 (092)504-1211 (093)435-3655 (096)386-5120 GST (03)5709-4501 GST (052)703-6131 GST (06)6538-3880 9:0012:0013:0019:00 0533-82-1134 hp-info@osg.co.jp E-mail:cs-info@osg.co.jp 3-22 Honnogahara, Toyokawa, Aichi, 442-8543, JAPAN TEL. +81-533-82-1118 FAX. +81-533-82-1136 Use safety cover, safety glasses and safety shoes during operation. Do not touch cutting edges with bare hands. Do not touch cutting chips with bare hands. Chips will be hot after cutting. Stop cutting when the tool becomes dull. Safe use of cutting tools Stop cutting operation immediately if you hear any strange cutting sounds. Do not modify tools. Please use correct tools for the operation.check dimensions to ensure proper selection. Tool specifications are subject to change without notice. OSG All rights reserved. 2015 OSG Corporation. OSG HP http://www.osg.co.jp OSG E-mail https://www.osg.co.jp/support/club/