C120-E285-10Z2 FUJITSU ULTRA LVD SCSI Host Bus Adapter Driver 3.0 - for Oracle Solaris -
()
FUJITSU ULTRA LVD SCSI Host Bus Adapter 3.0 SCSI/SAS SCSI/SAS HBA(Host Bus Adapter)
WARNING: fjulsa#: Device is using a hilevel intr hilevel interrupt handler WARNING: fjulsa#: cannot allocate soft state attach WARNING: fjulsa#: cannot get soft state attach ulsa_config_space_init failed attach PCI configuration register cannot map configuration space not supported vendor ID (#) LSILogic PCI device (1000,#) not supported map setup failed attach operating register map get iblock cookie failed attach interrupt handler
adding interrupt failed attach interrupt handler hba attach setup failed attach hba attach setup creating kmem cache failed attach creating minor node failed attach Target #: disabled TQ since disconnects are disabled Target#disconnect TAG creating pm component failed attach pm component ulsa_hs_msg_init failed attach Handshake ulsa_memory_confpage_init failed attach
ulsa_memory_fw_init failed attach ulsa_reply_msg_init failed attach ulsa_request_msg_init failed attach attach failed attach message message cannot map configuration space. PCI configuration register map not supported vendor ID (#) ID LSILogic PCI device (1000,#) not supported.
Unable to allocate dma handle. dma Unable to allocate memory for dma. dma Unable to bind DMA resources. dma chip reset failed chip reset IOC not come to READY state chip reset SCSI/SAS READY IOC status changed: %s SCSI/SAS %s="reset" "FAULT" IOC status changed: ioc_stat = # SCSI/SAS Unexpected DMA state: PCI Parity Error. fault code = # PCI DMA
Unexpected DMA state: PCI Bus Fault. fault code = # PCI Bus Fault No SMFA is in Reply Post FIFO: reply = # invalid context reply: reply = # context reply invalid address reply : addr = # address reply IOC received invalid SGL SCSI/SAS Scatter Gather List IOC is in invalid state SCSI/SAS IOC internal error occurred SCSI/SAS Resetting scsi bus, data overrun: got too much data from target (#,#) target#,#scsi bus reset SCSI/SAS
SCSI bus parity error from target (%d,%d) target#,#scsi bus parity error SCSI/SAS Resetting scsi bus, protocol error occurred from target (#,#) target#,#scsi bus/sas reset SCSI/SAS invalid task termination interrupt Task Resetting scsi bus: IOC found SCSI bus error from target (#,#) target#,#scsi /SAS SCSI/SAS invalid count of terminated commands SCSI /SAS fjulsa got unexpected EventNotification reply message EventNotification got unexpected EventAck reply message EventAck command timeout for Target #.# Target#,#SCSI/SAS
timeout on EventAck message interrupt EventAck IOC is in fault status. doorbell = # SCSI/SAS fault Reset History did not clear SCSI/SAS Target # disabled wide SCSI mode target#wide Target # reverting to async. Mode target# Target # reducing sync. transfer rate target#rate WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): Auto Request Sense emulation failed Auto Request Sense WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): IOC message timeout occurred. IOC stat = # SCSI/SAS
WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): handshake busy retry out handshake WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): PCI Bus error occurred. status=# PCI WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): first chip reset failed SAS WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): invalid base-wwid SAS WWID WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): get base-wwid failed SAS WWID WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): too many device capabilities. PCI Capabilities WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): capabilities pointer 0x%x out of range. PCI Capabilities pointer WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): PCI Express Capability not found. PCI Express Capability
WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): MSI Capability not found. MSI WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): timeout on EventAck message interrupt EventAck WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): timeout on SAS IO Unit Control message interrupt SAS IO Unit Control WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): getting interrupt type failed WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): MSI interrupt is unsupported. MSI WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): getting number of interrupts failed WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): getting number of available interrupts failed WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): allocating internal control area failed
WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): getting interrupt priority failed WARNING: /pci@#,#/fjsv,eulsa@# (fjulsa#): adding interrupt handler failed
PANIC:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#): Not in softc list! fjulsa#detach PANIC:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#): ulsa_pkt_destroy_extern: freeing free packet pkt PANIC:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#): timeout on bus reset interrupt Bus reset timeout SCSI/SAS PANIC:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#): invalid queue entry cmd=# fjulsa PANIC:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#): ulsa_waitq_delete: queue botch fjulsa
/pci@#,#/fjsv,(e)ulsa@#(fjulsa#): scsi reset delay of 0 is not recommended, resetting to SCSI_DEFAULT_RESET_DELAY scsi-reset-delay 0 default fjulsa.conf /pci@#,#/fjsv,(e)ulsa@#(fjulsa#): transfer rate and width for Target (#,#) was set up. transfer rate = %s, width = %ss %s="#ns" "async" %ss="wide" "Narrow" "transfer rate = async, width = Narrow"SCSI wide /pci@#,#/fjsv,(e)ulsa@#(fjulsa#): ulsa_hbaq_delete: target #- was on hbaq # times. hbaq /pci@#,#/fjsv,(e)ulsa@#(fjulsa#): function # done, IOCStatus = #, IOCLogInfo = # SCSI/SAS /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): target#-scsi-options=# target#-scsi-options /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): loginfo = # SCSI/SAS loginfo WARNING
/pci@#,#/fjsv,(e)ulsa@# (fjulsa#): Cmd (#) dump for Target # Lun #: WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): IOC message timeout occurred. IOC stat = # WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): command timeout for Target #.# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): timeout on EventAck message interrupt /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): cdb=[ # # # # # # ] WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): IOC message timeout occurred. IOC stat = # WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): command timeout for Target #.# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): timeout on EventAck message interrupt /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): pkt_flags=# pkt_statistics=# pkt_state=# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): IOC message timeout occurred. IOC stat = # WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): command timeout for Target #.# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): timeout on EventAck message interrupt /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): pkt_scbp=# cmd_flags=# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): IOC message timeout occurred. IOC stat = # WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): command timeout for Target #.# WARNING: /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): timeout on EventAck message interrupt /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): LSILogic LSI53C1030 found. SCSI
fjulsa# is /pci@#,#/fjsv,(e)ulsa@# fjulsa /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): LSILogic LSISAS1068E found. SAS /pci@#,#/fjsv,(e)ulsa@# (fjulsa#): fjulsa#: Initiator WWNs: 0x#-0x# SAS WWN