R MO-6000 MO-6000 Series DATA BOOK No
|
|
- こうしろう わしあし
- 5 years ago
- Views:
Transcription
1 R MO-6000 MO-6000 Series DATA BOOK No
2 CONTENTS! MO-6700S Series, MO-6900S MO-6700D Series # MO-6900C Series $ MO-6900R Series % MO-6900G Series ^ MO-6900J Series
3 !!. MO-6700S Series MO-6900S Series 1
4 2
5 CONTENTS 1. MODEL NUMBERING SYSTEM CLASSIFICATION BASED ON MATERIALS TO BE USED... 5 MO-6 04S 1-needle overlock stitch machine... 5 MO-6 14S 2-needle overlock stitch machine... 6 MO-6 16S Safety stitch machine GAUGE PARTS CONSTRUCTION CHART... 8 MO-6 04S 1-needle overlock stitch machine... 5 MO-6 14S 2-needle overlock stitch machine... 9 MO-6 16S Safety stitch machine TABLE OF SUBCLASS MACHINE GAUGE MO-6 04S 1-needle overlock stitch machine MO-6 14S 2-needle overlock stitch machine MO-6 16S Safety stitch machine ADJUSTMENT OF THE NEEDLE HEIGHT AND LOOPER TIMMING MO-6 S SERIES POSITION OF THE THREAD GUIDES AND THE LOOPER THREAD TAKE-UPS TABLE OF REPLACEMENT GAUGE Throat plate Feed dog Presser foot Looper TABLE OF DEVICE Chain-off thread trimming device Chain-off thread suction device / Cloth chip suction device Auto-lifter Gathering device Blind hemming device Piping folder Ruler Tape guide Feller Binder Backlatch device
6 / MODEL NUMBERING SYSTEM / Model No. code / Subclass code / Attachment & Device code / Special-order code MO-6914S - BE6-327 / S162 / T039 / X / Series code Classifi cation of series MO-6900 Standard overlock machine Super high-speed MO-6700 Standard overlock machine high-speed 2 / Seam code /Stitch code Conforms to USA standard needle safety stitch 43 2-needle double chain stitch 45 Specification code S Standard 4 Needle gauge code 0 /1-Needle B C D E F Needle gauge (mm) 2.0 mm 2.4 mm 3.2 mm 4.0 mm 4.8 mm needle stitch side Safety Overlock side Overedging width code Overedging width (mm) A mm F 4.8 mm D 3.2 mm H 6.4 mm E 4.0 mm 6 Feed dog code Number of feed dog rows 2-row 1-row 3-row 4-row Material code Ciassification based on materials to be used (The fi gures show grade of material thickness) Extra-light- to light-weight materials Light- to mediumweight materials etc. For training wear, knit, For dress skirts to sport wear Medium- to heavy-weight Knit, sweater, balky, etc. materials General fabrics,denim, bathing suits Heavy-weight Denim (Jeans) materials Application Code Classification based on type of operation For runstitching For blind hemming For gathering 4 For tape attaching 5 6 F 9 For binding For rolling in tape Soft chain / Special machine code Special specifi cations other than gauge set 0 Standard 6 Feed dog with lips 7 Upper looper high throw type F For bathing suits H Upper looper extra high throw type Replacement gauges and attachments code These codes indicate partial change or specifying of subclass model components. (See below for the details.) Throat plate E** 10 Feed dog F** Presser foot G** Replacement Looper H** gaugel121 Blind hemming S159 Gathering S161 S162 M077 Piping & gathering N077 Tape binder Q141Tape guide Gauges 1 Attachments 2 Labor-saving device code Device for achieving labor saving, higher productivity, automation and greater ease of operation T039 T040 T041S T042S AK32 AK49 AK101 LB6B 12 One-touch type chain-off thread trimming device Automatic type thread trimming device Pneumatic fl at cutter Pneumatic side cutter Automatic lifter device Pneumatic cylinder type automatic lifter device Pneumatic type (for servomotor) Backlatching(semi - auto) For 2 needle overlock / Special order code*3 Denotes customer s special requirements. Figures denoting special requirements are to follow in sequence. The description of each requirements is to be given in attached sheets. 1 Mainly concerned with separate gauges except for inseparable gauge sets such as throat plate & feed dog (in this case, list the simultaneous replacement parts). When replacing some discrete gauges, write as follows : (Example) G09/H01/H03 2 Attachments or the like that will work as a unit or a set and that can be mounted on standard machines. (Accompanied by simultaneous replacement gauge parts) 3 Necessary when any specialorder parts or the like other than gauges or attachments are required to be mounted on machine heads before shipment. (See Code Table.) 4
7 CLASSIFICATION BASED ON MATERIALS TO BE USED 1-needle overlock stitch machine MO S - (MO-6 05S) - Materials code Special machine code Application code / Application code / Runstitching / Blind hemming / Binding Material code 0 / F 1 5 Extra Lightweight MO-6 04S-0A4-150 MO-6 04S-0A5-150 Lightweight materials For rolled hemming Lightweight materials Mediumweight materials 2 For training wear, knit, etc. 3 For training wear, knit, etc. (for dress skirts and sport wear) 300 MO-604S-0D4-300 MO-6 04S-0E4-300 MO-6 04S-0F4-300 MO-604S-0D6-300 MO-6904S-0E6-300 MO-6 04S-0F F0 MO-6 04S-0D4-3F0 MO-6 04S-0D6-3F0 MO-6 04S-0E4-3F0 3F6 MO-6 04S-0D4-3F6 210 MO-6 05S-0D4-210/L121 Mediumweight materials 4 40H MO-6 04S-0E4-40H MO-6 04S-0E6-40H MO-6704S-0F4-40H 41H MO-6 05S-0E4-41H/L121 Knit sweater, bulky etc. 4FH MO-6 04S-0E4-4FH Heavyweight materials 5 Heavyweight overedging 500 MO-6 04S-0F H MO-6 04S-0F6-50H 5
8 2-needle overlock stitch machine MO S - (MO-6 12S) - Materials code Special machine code Application code / Application code / Runstitching / Gathering Tape attaching For wool Material code Lightweight materials 2 For training wear,knit,etc. 20H MO-6 14S-BE6-20H Mediumweight materials 3 For dress skirts and sport wear 307 MO-6 14S-BD4-307 MO-6 14S-BE4-307 MO-6 14S-BD6-307 MO-6 14S-BE6-307 MO-6714S-BE4-307/LB6B 327 MO-6 14S-BE6-327 /S MO-6714S-BD6-347/G39/Q141 34H MO-6714S-BD6-34H/G39/Q141 MO-6714S-BE6-34H/G39/Q141 Mediumweight materials 4 Knit sweater, bulky etc. 40H MO-6 14S-BE4-40H MO-6 14S-BE6-40H MO-6914S-CF6-40H MO-6 12S-CE4-40H 44H MO-6 14S-BE6-44H/G39/Q141 MO-6 14S-BE7-44H/G02/Q141 Heavyweight materials 5 Mediumweight knit, bathing suits and denim etc. 507 MO-6 12S-DF F MO-6 12S-DF6-50F 6
9 Safety stitch machine MO S - ( ) MO-6743S MO-6745S - Materials code Special machine code Application code / Application code / Runstitching / Gathering Rolling in tape Material code 0 / F 2 6 Lightweight materials 3 For dress, skirts, and sport wear 300 MO-6 16S-DE4-300 MO-6 16S-DD6-300 MO-6 16S-DE6-300 MO-6 16S-FF F0 360 MO-6745S-FF4-360 /N077 MO-6 16S-DD6-3F0 Mediumweight materials 4 For dress, skirts, and sport wear 40H MO-6 16S-BE4-40H MO-6 16S-DE4-40H MO-6 16S-DE6-40H MO-6 16S-FF6-40H MO-6743S-1D6-40H MO-6743S-2D6-40H 42H MO-6 16S-FF6-42H /S159 MO-6 16S-DE4-42H /S161 Heavyweight materials 5 6 Safety stitch for mediumweight materials and denim Safety stitch for heavyweight materials and denim 500 MO-6 16S-DD6-500 MO-6 16S-FF H MO-6 16S-DF6-50H MO-6 16S-FF6-50H MO-6 16S-FH6-50H MO-6 43S-1D6-50H 60H MO-6 16S-FF6-60H MO-6 16S-FH6-60H 7
10 GAUGE PARTS CONSTRUCTION CHART MO-6 04S SERIES 1 Runstitching1 Blind hemming 1-NEEDLE OVERLOCK STITCH MACHINE D:3.2 R4200J6DD00 E:4.0 R4200J6ED00 F:4.8 R4200J6FD B C00 B P B C00 B C0A MO-6 05S-0D4-210/L121 MO-6 05S-0E4-41H/L121 Blind hemming (Light to medium) MO-6 04S-0D4-300 MO-6 04S-0E4-40H MO-6 04S-0E4-300 Runstitching (Light to medium) Runstitching (Medium to heavy) MO-6 04S-0F4-300 MO-6704S-0F4-40H Runstitching Runstitching (Light to medium) (Medium to heavy) 8
11 MO-6 04S SERIES 1-NEEDLE OVERLOCK STITCH MACHINE 2 Runstitching D:3.2 R4300J6DE00 E:4.0 R4300J6EE00 F:4.8 R4300J6FE0B F:4.8 R4300J6FE0B B C00 B C0A MO-6 04S-0D6-300 MO-6 04S-0E6-40H MO-6 04S-0F6-300 MO-6 04S-0F6-500 MO-6904S-0E6-300 MO-6 04S-0F6-50H Runstitching Runstitching Runstitching Runstitching (Light to medium) (Medium to heavy) (Light to medium) (Medium to heavy) 9
12 MO-6 04S SERIES 1-NEEDLE OVERLOCK STITCH MACHINE Binding A: R4100J6AC00 A: R4200J6AC Polyurethane Polyurethane 1.2 B C MO-6 04S-0A5-150 Binding (Extra light) MO-6 04S-0A4-150 Binding (Extra light) 10
13 MO-6 04S SERIES 1-NEEDLE OVERLOCK STITCH MACHINE Soft chain D:3.2 R4200J6DD0A E:4.0 R4200J6ED0A D:3.2 R4200J6DD0C D:3.2 R4300J6DE0A B C00 B C B C00 B C00 B C00 MO-6 04S-0D4-3F0 MO-6 04S-0E4-3F0 Soft chain (Light to medium) MO-6 04S-0E4-4FH Soft chain (Medium to heavy) MO-6 04S-0D4-3F6 Soft chain (Light to medium) MO-6 04S-0D6-3F0 Soft chain (Light to medium) 11
14 MO-6 14S SERIES 2-NEEDLE OVERLOCK STITCH MACHINE 1 Runstitching BD:2.0X3.2 R4205J6DE00 BE:2.0X4.0 R4205J6EE00 BD:2.0X3.2 R4305J6DE00 BE:2.0X4.0 R4305J6EE00 CF:2.4X4.8 R4306J6FE B B0E B P B P MO-6 14S-BD4-307 MO-6 14S-BE4-40H MO-6 14S-BE6-20H MO-6 14S-BD6-307 MO-6 14S-BE6-40H MO-6914S-CF6-40H MO-6 14S-BE4-307 MO-6 14S-BE6-307 Runstitching (Light to medium) Runstitching (Medium to heavy) Runstitching (Knits, light to medium) Runstitching (Knits, light to medium) Runstitching (Knits, medium to heavy) Runstitching (Knits, medium to heavy) 12
15 MO-6 14S SERIES 2 Runstitching2 2-NEEDLE OVERLOCK STITCH MACHINE CE:2.4X4.0 R4206J6EE B B0E B P B P MO-6 12S-CE4-40H Runstitching (Knits, medium to heavy) 13
16 MO-6 14S SERIES 2-NEEDLE OVERLOCK STITCH MACHINE 3 Runstitching DF:3.2X4.8 R4308J6FE0B DF:3.2X4.8 R4308J6FE0A MO-6 12S-DF6-50F Runstitching (Bathing suits, knits and denim medium to heavy) MO-6 12S-DF6-507 Runstitching (Knits and denim medium to heavy) 14
17 MO-6 14S SERIES 2-NEEDLE OVERLOCK STITCH MACHINE Gathering BE:2.0X4.0 R4305J6EE0A B P MO-6 14S-BE6-327/S162 Gathering (Light to medium) 15
18 MO-6 14S SERIES 2-NEEDLE OVERLOCK STITCH MACHINE Knit with tape attaching BD:2.0X3.2 R4305J6DE00 BE:2.0X4.0 R4305J6EE00 BE:2.0X4.0 R4405J6EE B B0F B B0B B B0B MO-6714S-BD6-347 /G39/Q141 MO-6714S-BD6-34H /G39/Q141 MO-6714S-BE6-34H /G39/Q141 MO-6 14S-BE6-44H /G39/Q141 MO-6 14S-BE7-44H /G02/Q141 Knit with tape attaching Knit with tape attaching Knit with tape attaching Knit with tape attaching (Light to medium) (Light to medium) (Medium to heavy) (Medium to heavy) 16
19 MO-6714S SERIES 2-NEEDLE OVERLOCK STITCH MACHINE Backlatching(semi-auto) BE:2.0X4.0 R4205J2ED B P MO-6714S-BE4-307/LB6B Backlatching(Semi-auto) (Light to medium) 17
20 MO-6 16S SERIES 1 Runstitching1 SAFETY STITCH MACHINE BE:2.0X4.0 R4505J6ED00 DE:3.2X4.0 R4508J6ED MO-6 16S-BE4-40H Runstitching (Medium to heavy) MO-6 16S-DE4-300 Runstitching (Light to medium) 18 MO-6 16S-DE4-40H Runstitching (Medium to heavy)
21 MO-6 16S SERIES SAFETY STITCH MACHINE 2 Runstitching DD:3.2X3.2 R4608J6DD00 DE:3.2X4.0 R4608J6ED00 FF:4.8X4.8 R4612J6FD MO-6 16S-DD6-300 MO-6 16S-DE6-300 MO-6 16S-DE6-40H MO-6 16S-FF6-300 MO-6 16S-FF6-40H Runstitching Runstitching Runstitching Runstitching (Light to medium) (Medium to heavy) (Light to medium) (Medium to heavy) 19
22 3 Runstitching3 MO-6 16S SERIES SAFETY STITCH MACHINE DD:3.2X3.2 R4608J6DF00 FF:4.8X4.8 R4612J6FG MO-6 16S-DD6-500 Runstitching (Medium to heavy) MO-6 16S-FF6-500 Runstitching (Medium to heavy) 20
23 4 Runstitching4 MO-6 16S SERIES SAFETY STITCH MACHINE DF:3.2X4.8 R4608J6FG00 FF:4.8X4.8 R4612J6FF00 FH:4.8X6.4 R4612J6HG MO-6 16S-DF6-50H Runstitching (Medium to heavy) Extra high throw 21 MO-6 16S-FF6-50H MO-6 16S-FH6-50H Runstitching (Medium to heavy) Extra high throw
24 MO-6 16S SERIES SAFETY STITCH MACHINE 5 Runstitching FF:4.8X4.8 R4612J6FK00 FH:4.8X6.4 R4612J6HK MO-6 16S-FF6-60H MO-6 16S-FH6-60H Runstitching (Heavy to extra heavy) 22
25 MO-6 16S SERIES Gathering SAFETY STITCH MACHINE DE:3.2X4.0 R4508J6ED0B FF:4.8X4.8 R4612J6FD0A MO-6 16S-DE4-42H/S161 Gathering (Medium to heavy) MO-6 16S-FF6-42H/S159 Gathering (Medium to heavy) 23
26 MO-6 16S SERIES Gathering SAFETY STITCH MACHINE DD:3.2X3.2 R4608J6DD MO-6 16S-DD6-3F0 Soft chain (Light to medium) 24
27 MO-6743S SERIES Runstitching 3-NEEDLE SAFETY STITCH MACHINE D:3.2X2X3.2 R4608J6DE01 1D:4.8X2X3.2 R4612J6DE MO-6743S-2D6-40H Runstitching (Light to medium) MO-6743S-1D6-40H Runstitching (Light to medium) 25
28 MO-6745S SERIES Rolling in tape 2-NEEDLE DOUBLE CHAIN STITCH MACHINE FF:4.8X MO-6745S-FF4-360/N077 Rooling in tape (Light to medium) 26
29 / TABLE OF SUBCLASS MACHINE GAUGE MO-6 04S 1-needle overlock stitch machine Material sewing width M o d e l Throat plate Main feed dog Auxiliary feed dog Differential feed dog Presser foot asm. Presser foot hinge Presser foot Stitch tongue Needle clamp Upper looper Lower looper Chip guard cover Upper knife Lower knife Needle guard Traveling needle guard Gauge Looper holder Looper support / For runstitching L to M MO-6 04S-0D4-300 MO-6 04S-0D6-300 MO-6 04S-0E4-300 MO-6904S-0E6-300 R4200J6DD00 R4300J6DE00 R4200J6ED00 R4300J6EE B C B C B C M to H MO-6 04S-0F4-300 MO-6 04S-0F6-300 MO-6 04S-0E4-40H MO-6 04S-0E6-40H MO-6704S-0F4-40H MO-6 04S-0F6-500 MO-6 04S-0F6-50H R4200J6FD00 R4300J6FE0B R4200J6ED00 R4300J6EE00 R4200J6FD00 R4300J6FE0B B P B C B P B C0A B C00 B C0A MO MO / For blind hemming L to M M to H MO-6 05S-0D4-210/L121 MO-6 05S-0E4-41H/L121 R4200J6DD00 R4200J6ED MO MO / For binding EL to L MO-6 04S-0A4-150 MO-6 04S-0A5-150 R4200J6AC00 R4100J6AC B C MO MO / For soft chain L to M 3.2 MO-6 04S-0D4-3F0 MO-6 04S-0D4-3F6 MO-6 04S-0D6-3F0 R4200J6DD0A R4200J6DD0C R4300J6DE0A B C B C MO M to H 4 MO-6 04S-0E4-3F0 MO-6 04S-0E4-4FH R4200J6ED0A B C MO EL... Extra light-weight materials L... Light-weight materials M... Medium-weight materials H... Heavy-weight materials EH... Extra heavy-weight materials 27
30 MO-6 14S 2-needle overlock stitch machine Material Needle gauge & sewing width M o d e l Throat plate Main feed dog Auxiliary feed dog Differential feed dog Presser foot asm. Presser foot hinge Presser foot Rear presser foot Stitch tongue Needle clamp Upper looper Lower looper Chip guard cover Upper knife Lower knife Needle guard Traveling needle guard Gauge Looper holder Looper support / For runstitching 2 X 4 MO-6 14S-BE6-20H R4305J6EE L to M M to H 2 X X X 4.8 MO-6 14S-BD4-307 MO-6 14S-BD6-307 MO-6 14S-BE6-307 MO-6 14S-BE4-307 MO-6 14S-BE4-40H MO-6 14S-BE6-40H MO-6914S-CF6-40H R4205J6DE00 R4305J6DE00 R4305J6EE00 R4205J6EE00 R4305J6EE00 R4306J6FE B B0E B B0E B P B P MO MO / For knits with tape attaching L to M 2 X X 4 MO-6714S-BD6-347/G39/Q141 MO-6714S-BD6-34H/G39/Q141 MO-6714S-BE6-34H/G39/Q141 MO-6 14S-BE6-44H/G39/Q141 R4305J6DE00 R4305J6EE MO MO M to H MO-6 14S-BE7-44H/G02/Q141 R4405J6EE B B0F B B0B B B0B / For gathering L to M 2 X 4 MO-6 14S-BE6-327/S162 R4305J6EE0A B P ºMO MO / For backlatching (Chain-off thread rolling-in device by semi-auto) L to M 2 X 4 MO-6714S-BE4-307/LB6B R4205J2ED B P MO MO / For runstitching M to H 2.4 X X 4.8 MO-6 12S-CE4-40H MO-6 12S-DF6-507 MO-6 12S-DF6-50F R4206J6EE00 R4308J6FE0A R4308J6FE0B B B0E B P B P MO MO EL... Extra light-weight materials L... Light-weight materials M... Medium-weight materials H... Heavy-weight materials EH... Extra heavy-weight materials 28
31 MO-6 16S Safety stitch machine Material Needle gauge & sewing width M o d e l Throat plate Main feed dog Auxiliary feed dog Differential feed dog Presser foot asm. Presser foot hinge Presser foot Rear presser foot Needle clamp Upper looper Lower looper Chain looper Chip guard cover Upper knife Lower knife Needle guard Needle guard Needle guard Traveling needle guard Gauge Looper holder Looper support / For runstitching 3.2 X 3.2 MO-6 16S-DD6-300 R4608J6DD X X 4.8 MO-6 16S-DE4-300 MO-6 16S-DE6-300 MO-6 16S-FF6-300 R4508J6ED00 R4608J6ED00 R4612J6FD L to M 2 X X 4 MO-6 16S-BE4-40H MO-6 16S-DE4-40H MO-6 16S-DE6-40H R4505J6ED00 R4508J6ED00 R4608J6ED X 4.8 MO-6 16S-FF6-40H R4612J6FD M to H H to EH 3.2 X X X X 4.8 MO-6 16S-DD6-500 MO-6 16S-FF6-500 MO-6 16S-DF6-50H MO-6 16S-FF6-50H MO-6 16S-FH6-50H MO-6 16S-FF6-60H MO-6 16S-FH6-60H R4608J6DF00 R4612J6FG00 R4608J6FG00 R4612J6FF00 R4612J6HG00 R4612J6FK00 R4612J6HK / For gathering L to M 3.2 X X 4.8 MO-6 16S-DE4-42H/S161 MO-6 16S-FF6-42H/S159 R4508J6ED0B R4612J6FD0A / For soft chain L to M 3.2 X 3.2 MO-6 16S-DD6-3F0 R4608J6DD / Universal and special use L to M 4.8 X 2 X X 2 X 3.2 MO-6743S-1D6-40H MO-6743S-2D6-40H R4612J6DE01 R4608J6DE B F00 B D / For rolling in tape L to M 4 X 3.2 MO-6 45S-FF4-360/N EL... Extra light-weight materials L... Light-weight materials M... Medium-weight materials H... Heavy-weight materials EH... Extra heavy-weight materials 29
32 MO-6 S A B C B C E E D G D F H J J K L MO-6 16S-F -60H 13.0± ± ±0.3 (48.4) A # A ( ) A B C D E F G H J K L M # S MO- -0A 0E ± ± ±0.3 (45.0) A S A ( ) # MO-6 04S- 0 F 0H ± ± ±0.3 (46.2) A A ( ) H # MO-6 04S- 0-4 H 11.3± ± ±0.3 (48.2) A H A ( ) MO-6 4S- B ±0.1 (9.1) 10.3± ±0.3 (47.3) B # B ( ) H # MO-6 4S-B 3 H 11.3±0.1 (9.9) 11.0± ±0.3 (48.4) A A ( ) -4 H #61 MO-6914S-CF -40H 11.3±0.1 (10) 10.8± ±0.3 (48.5) A ± A ( ) MO-6 12S-CE -4 H 11.3±0.1 (9.9) 11.8± ± # (46.8) A A ( ) ± #60 MO-6 12S-DF ±0.1 (9.4) 11.0±0.5 (46.9) B ± B ( ) 3.6± #66 MO-6 12S-DF6-50F 11.0±0.3 (9.4) 11.0±0.5 (46.9) B ± B ( ) MO-6 16S ± ± ±0.3 (46.2) A # A ( ) MO-6 16S ± ± ±0.3 (46.2) A # A ( ) H # MO-6 16S- A F 11.3± ± ±0.3 (48.2) A H A ( ) M MO-6743S- -40H 11.3±0.1 (9.9) 11.0± ±0.3 (48.4) A #61 39 A ( ) MO-6745S ±
33 ADJUSTMENT OF THE NEEDLE HEIGHT AND LOOPER TIMMING MO-6 S SERIES Needle height Upper looper components Lower looper components Double-chain looper components 1- needle overlock macine/ safety stitch machine 2- needle overlock machine L 3-needle safety stitch A B C B C D J E F H K G D E 2-needle overlock machine 3-needle safety stitch machine J 2-needle overlock machine 3-needle safety stitch machine M Classifi cation 1-needle overlock machine 2-needle overlock machine Safety stitch machine Subclass Description S -210 MO- -0A 0E 6 05S MO-6 04S- 0 F 0H H MO-6 04S- 0-4 H -50H MO-6 4S- B H MO-6 4S-B 3 H -4 H MO-6914S-CF -40H MO-6 12S-CE -4 H MO-6 12S-DF6-507 MO-6 12S-DF6-50F MO-6 16S MO-6 16S H MO-6 16S- A F -50H MO-6 16S-F -60H MO-6743S- -40H MO-6745S Needle height Upper looper components Lower looper components Double-chain looper 1-needle 2-needle (left) A B 2-needle (right) C Upper looper height D Projection of upper looper E Height of pin F Marker of guide support 10.5± ± ±0.3 (45.0) A 10.5± ± ±0.3 (46.2) A 11.3± ± ±0.3 (48.2) A 10.5±0.1 (9.1) 10.3± ±0.3 (47.3) B 11.3±0.1 (9.9) 11.0± ±0.3 (48.4) A 11.3±0.1 (10) 10.8± ±0.3 (48.5) A 11.3±0.1 (9.9) 11.8± ±0.1 (9.4) 11.0± ±0.3 (9.4) 11.0± ± ± ±0.3 (46.2) A 10.5± ± ±0.3 (46.2) A 11.3± ± ±0.3 (48.2) A 13.0± ± ±0.3 (48.4) A 11.3±0.1 (9.9) 11.0± ±0.3 (48.4) A Position of guide support G Guide support cover Center-tocenter of upper looper holder H Marker of upper looper #81 38 Marker A ( ) #81 38 A ( ) #19 39 A ( ) #60 B ( ) #61 39 A ( ) #61 39 A ( ) 3.6± #61 (46.8) A 38 (Right side) A ( ) 3.8± #60 (46.9) B 39 (Right side) B ( ) 3.6± #66 (46.9) B 39 (Right side) B ( ) #81 A ( ) #92 A ( ) #19 A ( ) #62 39 A ( ) #61 39 A ( ) Feed amount of lower looper J Radius of lower looper K Feed amount of doublechain looper L Radius of double-chain looper ± ± ± M to to to to to ± to Upper looper guide support gauge Upper looper holder
34 A 15.8,,,,,,,, 13.5 B 3.4,,, 1.8, , 2.1 C , D , E 22,,,,,,,,, F 65,,,,,,,,, G 17.5,,,,,,,,, H 43.5,,,,,, 40.5, 43.5 I 26.5,,,,,, 24, 26.5 J , K 15, , 14 L 6.5, 10, 6.5,, 24 34, M 29,,, 27.5,, 29, 26.5 N , 20, 19 24, 19 O 11,,,,,, 12, 9.5 P ,
35 6. POSITION OF THE THREAD GUIDES AND THE LOOPER THREAD TAKE-UPS MO-6 04S MO-6 14S MO-6 16S Needle thread take-up lever of 2-needle machine B Needle thread guide Needle thread guide B A Needle thread take-up The thread hole in the needle thread guide and the hooked portion of the needle thread take-up are in the position where 2/3 of the hole in the needle thread guide can be observed. Needle thread guide of 2-needle machine The thread hole in the needle thread guide and the hooked portion of the needle thread take-up are in the position where 2/3 of the hole in the needle thread guide can be observed. B A D C Needle thread takeup guide of doublechainstitch machine A P Needle thread take-up lever of doublechainstitch machine The thread hole in the needle thread guide and the hooked portion of the needle thread take-up are in the position where 2/3 of the hole in the needle thread guide can be observed. The thread hole in the double-chainstitch needle thread guide and the hooked portion of the needle thread take-up are in the position where the entire hole in the needle thread guide can be observed. (Caution) The needle thread take-up shall be positioned at the lower dead point. Upper looper thread guide (middle) E Upper looper thread guide (upper) G K Upper looper thread guide (right) L Lower looper thread guide F H J I O N Looper thread take-up (left) Looper thread take-up (right) M Lower looper thread take-up MO-6 04S MO-6 14S MO-6 16S MO-6 16S MO-6 05S MO-6 04S Symbol (Standard) (Standard) (Standard) (50H, 60H) (Hemming) (Soft chain) General Woolly General Woolly General Woolly General thread General Woolly General thread thread thread thread thread thread thread thread thread A 15.8,,,,,,,, 13.5 B 3.4,,, 1.8, , 2.1 C , D , (Unit : mm) E 22,,,,,,,,, F 65,,,,,,,,, G 17.5,,,,,,,,, H 43.5,,,,,, 40.5, 43.5 I 26.5,,,,,, 24, 26.5 J , K 15, , 14 L 6.5, 10, 6.5,, 24 34, M 29,,, 27.5,, 29, 26.5 N , 20, 19 24, 19 O 11,,,,,, 12, 9.5 P ,
36 34 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S-0A4-150 ø Lapping seam throat plate with pipe for Gimp can be entered into Diameter of usable gimp is 1 mm entering gimp lapping seams. or less. Diameter of gimp is ø1 mm or less. R4200J0AC0A MO-6 16S-DE4-300 MO-6 16S-DE4-40H Stitch latch replacing type throat plate Overedging width can be changed by replacing throat plate latch only. Throat plate TABLE OF REPLACEMENT GAUGE R4508J6ED0C (Stitch latch : Latch for changing overedging width D width : H width : Mounting screw : SS TP) Throat plate latch Throat plate latch replacing type throat plate MO-6 14S-BE6-307 MO-6 14S-BE6-40H MO-6 14S-BE6-44H Replacing throat plate latch only is possible without removing throat plate. Simultaneous replacement part Differential feed dog : R4305J0EE0C (Throat plate latch : Mounting screw : SM SP)
37 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S-0A5-150 Main feed dog Differential feed dog Auxiliary feed dog Narrow pitch feed dog Feed force is more than OA5, standard urethane feed dog. This feed dog is effective to prevent cloth from feed dog fl aw due to the narrow pitch. Feed dog Main feed dog MO-6 16S-DE4-300 MO-6 16S-DE4-40H Auxiliary feed dog 1.15 Narrow pitch feed dog By making the feed dog pitch narrow to the light-weight material, the feed dog fl aw to the material can be prevented. Differential feed dog Main feed dog MO-6 04S-0D6-300 MO-6 04S-0E6-300 MO-6 04S-0E6-40H Auxiliary feed dog 1.15 Wide pitch feed dog MO-6 04S-0F6-300 Feed force is increased by making the feed pitch wide. Differential feed dog
38 Code Diagram Name Applicable model Application and feature Remarks MO-6 14S-BE7-44H Main feed dog / G02 / Q Auxiliary feed dog 1.15 Wide pitch feed dog Feed force, especially for woolen yarn knits sewing, is increased by making the feed pitch wide. Differential feed dog B B0G Main feed dog MO-6 14S-BE6-20H MO-6 14S-BD6-347 MO-6 14S-BD Auxiliary feed dog 1.15 Wide pitch feed dog MO-6 14S-BE6-40H MO-6 14S-BE6-34H MO-6 14S-BE6-44H Even hard-to-feed material can be fed by making the feed dog pitch wide. Differential feed dog Main feed dog MO-6 16S-FF6-500 MO-6 16S-FF6-50H MO-6 16S-FH6-50H Auxiliary feed dog Wide pitch feed dog Even hard-to-feed material can be fed by making the feed dog pitch wide. Differential feed dog
39 Code Diagram Name Applicable model Application and feature Remarks MO-6 05S-0D4-210 Main feed dog MO-6 04S-0D4-3 0 MO-6 04S-0E Differential feed dog Auxiliary feed dog Feed dog with urethane teeth MO-6 04S-0E4-3F6 MO-6 04S-0E4-4 H Feed dog fl aw to cloth can be prevented. MO-6 04S-0F4-300 MO-6 04S-0F4-40H MO-6 05S-0E4-41H Main feed dog MO-6 14S-BD4-307 MO-6 14S-BE4-307 MO-6 14S-BE4-40H Auxiliary feed dog 1.15 Feed dog with urethane teeth Feed dog fl aw to cloth can be prevented. Differential feed dog Main feed dog MO-6 14S-BE7-44H / G02 / Q Auxiliary feed dog Feed dog for preventing cloth from being caught in feed dog Even when sewing stretchy material with differential feed, the material does not fall in the Differential feed dog groove of feed dog B B0F
40 Code Diagram Name Applicable model Application and feature Remarks Main feed dog MO-6 16S-DD6-500 Auxiliary feed dog Feed dog for light-weight materials Feed dog fl aw to cloth can be prevented Differential feed dog Main feed dog MO-6 04S-OF6-500 MO-6 04S-OF6-50H Auxiliary feed dog Feed dog for light-weight materials Feed dog fl aw to cloth can be prevented. Differential feed dog Main feed dog Differential feed dog Auxiliary feed dog Feed dog adaptable to puckering MO-6 16S-DE4-300 MO-6 16S-DE4-40H Puckering prevention is effective even for light-weight material by the feed dog set on the both sides of chain looper needle. Simultaneous replacement parts Throat plate : DD : R4508J6DD0A DE : R4508J6ED0A DF : R4508J6FD0A
41 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S-0F6-300 MO-6 04S-0F6-500 Applicable device (Tape guide) MO-6 04S-0F6-50H Spin tape attaching presser foot It is most suitable for the Q141 : MAQ141000A0 (Tape width : 5 mm) shoulder tape attaching process of knits. Presser foot MO-6 14S-BD6-347 MO-6 14S-BD6-307 MO-6 14S-BE6-307 Applicable device (Tape guide) Stitch latch replacing type throat plate MO-6 14S-BE6-40H Overedging width can be Q141 : MAQ141000A0 39 MO-6 14S-BE6-44H MO-6 14S-BE7-44H changed by replacing throat plate latch only MO-6 14S-BE6-327 Applicable device (Tape guide) Spin tape attaching presser foot for It can be used for the various Q141 : MAQ141000A0 gathering use of the gathering process (Tape width : 7 mm or less) and the shoulder tape attaching process
42 Code Diagram Name Applicable model Application and feature Remarks MO-6 16S-DE4-300 MO-6 16S-DE4-40H Applicable device (Tape guide) MO-6 16S-DD4-40H Spin tape attaching presser foot MO-6 16S-DD6-300 It is the exclusive tape attaching Q141 : MAQ141000A0 (Tape width : 9.5 mm or less) MO-6 16S-DE6-300 presser foot for safety stitch MO-6 16S-DD6-500 machine MO-6743S-2D6-40H Applicable device (Tape guide) Q141 : MAQ141000A0 40 Spin tape attaching presser foot (Tape width : 7 mm or less) It is the tape attaching presser foot for 3-needle safety stitch machine, and can be used for the various processes MO-6 43S-1D6-40H MO-6 43S-1D6-50H Applicable device (Tape guide) Q141 : MAQ141000A0 Spin tape attaching presser foot It is the tape attaching presser (Tape width : 7 mm or less) foot for 3-needle safety stitch machine, and can be used for the various processes
43 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S MO-6 04S-0D4-3F0 Applicable device (Tape guide) MO-6 04S-0D6-3F0 MO-6 04S-0E4-3F0 Q141 : MAQ141000A0 MO-6 04S-0D4-3F6 MO-6 04S-0E -40H Spin tape attaching presser foot It is most suitable for the MO-6 04S-0E -4FH (Tape width : 5 mm) shoulder tape attaching process of knits. In addition, spin tape is entered to the immediate place before the needle, and not affected by the feed dog. As a result, the stable finish of product is obtained Spin tape attaching presser foot (Tape width : 5 mm) MO-6 14S-B -307 MO-6 14S-BE -40H MO-6714S-BD6-347 MO-6714S-B 6-34H MO-6 14S-BE6-44H It is most suitable for the shoulder tape attaching process of knits. In addition, spin tape is entered to the immediate place before the needle, and not affected by the feed dog. As a result, the stable finish of product is obtained. Applicable device (Tape guide) Q141 : MAQ141000A0 MO-6 43S-2D6-40H Applicable device (Tape guide) Q141 : MAQ141000A0 Spin tape attaching presser foot It is the tape attaching presser (Tape width : 7 mm or less) foot for 3-needle safety stitch machine, and can be used for the various processes. In addition, the function that can limit the tilt of presser foot is added to G06.
44 Code Diagram Name Applicable model Application and feature Remarks MO-6 14S-B -307 MO-6 14S-BE -40H Applicable device (Tape guide) MO-6 14S-BD6-347 MO-6714S-B 6-34H Q141 : MAQ141000A0 MO-6 14S-BE6-44H Spin tape attaching presser foot It is most suitable for the (Tape width : 5 mm) shoulder tape attaching process of knits. In addition, the stitch latch is large, and the appearance of seams is neatly fi nished. It is shorter than G02, and effective in sharp curve stitching. MO-6 14S-B -307 MO-6 14S-BE -40H MO-6 14S-BD6-347 Applicable device (Tape guide) MO-6714S-B 6-34H Q141 : MAQ141000A0 42 Spin tape attaching presser foot (Tape width : 5 mm) MO-6 14S-BE6-44H It is most suitable for the shoulder tape attaching process of knits. In addition, it is shorter than G02, and effective in sharp curve stitching MO-6 04S-OF6-300 MO-6 04S-OF6-500 MO-6 04S-OF6-50H Applicable device (Tape guide) Q141 : MAQ141000A0 Spin tape attaching presser foot It is most suitable for the (Tape width : 5 mm) shoulder tape attaching process of knits. In addition, it is shorter than G01, and effective in sharp curve stitching
45 Code Diagram Name Applicable model Application and feature Remarks MO-6 16S-DF6-50H Presser foot for sewing overlapped section Tractor type presser foot that improved riding performance. Stitch gathering at overlapped section is prevented MO-6 16S-FF6-500 MO-6 16S-FF6-50H MO-6 16S-FH6-50H 43 Presser foot for sewing overlapped section Overedging width can be changed by replacing throat plate latch only Presser foot for sharp curve stitching MO-6 04S-0D -300 MO-6 04S-0D -500 MO-6 04S-0D -3F0 MO-6 04S-0D -3F6 MO-6 04S-0D -40H MO-6 04S-0D -4FH MO-6 04S-0D -500 MO-6 04S-0D -50H It is shorter than the standard presser foot and effective in sharp curve stitching MO-6 04S-0E -300 MO-6 04S-0E -500 MO-6 04S-0E -3F0 MO-6 04S-0E -3F6 MO-6 04S-0E -40H MO-6 04S-0E -4FH MO-6 04S-0E -500 MO-6 04S-0E -50H
46 Code Diagram Name Applicable model Application and feature Remarks MO-6 14S-BE4-20H MO-6 14S-BD -307 MO-6 14S-BE -307 Presser foot for sharp curve stitching MO-6 14S-BE4-40H It is shorter than the standard MO-6 14S-BE6-40H presser foot and effective in sharp curve stitching MO-6 16S-D -300 MO-6 16S-D -40H MO-6 16S-D Presser foot for sharp curve stitching It is shorter than the standard presser foot and effective in sharp curve stitching Presser foot for sharp curve stitching MO-6 16S-F -300 MO-6 16S-F -40H MO-6 16S-F -500 It is shorter than the standard presser foot and effective in sharp curve stitching
47 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S-0D4-300 MO-6 04S-0D4-40H Overedging width adjustment type presser foot Overedging width can be easily changed by adjusting the stitch tongue to the right or left. Caution :Overedging width can be adjusted 3 to 5 mm. However, some kind of cloth may be curled, or upper looper and stitch tongue may collide with each other according to the thickness of cloth. So, be careful Overedging width adjustment type presser foot MO-6 16S-DD6-300 Overedging width can be easily changed by adjusting the stitch tongue to the right or left. Caution :Overedging width can be adjusted 3 to 5 mm. However, some kind of cloth may be curled, or upper looper and stitch tongue may collide with each other according to the thickness of cloth. So, be careful. MO-6 04S-0F6-500 MO-6 04S-0F6-50H Elastic tape attaching presser foot (Elastic tape width : 20 mm) It is for 20 mm wide elastic tape attaching
48 Code Diagram Name Applicable model Application and feature Remarks MO-6 12S-DF6-50 Elastic tape attaching presser foot It is most suitable for elastic (Elastic tape width : 9.5 to 15 mm) tape attaching process of swim-wear and the like MO-6 16S-FF6-40H MO-6 16S-FF6-500 MO-6 16S-FF6-50H MO-6 16S-FH6-50H 46 Presser foot for sewing overlapped sections and attaching zippers MO-6 16S-FF6-60H MO-6 16S-FH6-60H Presser foot width is narrow and it is used for the process of attaching zippers. Tractor type presser foot that the performance of getting over the overlapped sections is improved, and it prevents the stitch gathering at the overlapped sections. MO A5-150 MO A5-150 reversed differential gauges(for frilling) Description Throat plate Main feed dog Differential feed dog Auxiliary feed dog Presser foot Part No
49 Code Diagram Name Applicable model Application and feature Remarks MO-6 04S MO-6 04S MO-6 04S Upper looper for thick thread MO-6 04S- -40H Upper looper thread hole is large, and it is suitable when MO-6 16S using thick thread. MO-6 16S- -3F6 MO-6 16S MO-6 16S- -4 H MO-6 16S- -50H Looper * Needle to be used is DCx27 #14 or less MO-6 12S-DF6-507 MO-6 14S- -20H 47 Upper looper for thick thread MO-6 14S MO-6 14S- -4 H * Needle to be used is DCx27 #14 Upper looper thread hole is large, and it is suitable when using thick thread. or more Lower looper for thick thread All series of MO-6 00S (However, excluding 6 12S-DF6-50F) Lower looper thread hole is large, and it is suitable when using thick thread
50 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks One-touch type automatic chain-off thread trimming device (Electromagnetic type) Device Part No (For 100v, 115V, 200V, 240V) (For 220V, 380V, 415V, 440V) Chain-off thread is trimmed by only lightly touching switch at the end of sewing. This is a labor-saving device not only increasing the working efficiency but also making the disposal of chain-off thread unnecessary. It is the knife drive type by magnet, and simultaneously spin tape or the like can be cut. All series of MO-6 S (Excluding MO-6 12S) Chain-off thread trimming device TABLE OF DEVICE 48 Automatic chain-off thread trimming device (Number of stitches control type) (Electromagnetic type) Device Part No. For semi-sunken type table : For fully-sunken type table : (For 100V, 115V, 200V, 240V) Automatic chain-off thread trimming device that simultaneously cut spin tape or the like detects the start of sewing and the end of sewing, and securely cut chainoff thread with the preset length (number of stitches). In addition, this device uses the convenient method that not only performs thread trimming automatically, but also can be used as the manual type. All series of MO-6 S (Excluding MO-6 12S) It is necessary to jointly use the chain-off thread suction device. MC-5, MC-24 For semi-sunken type table : For fully-sunken type table : (For 200V, 220V, 380V, 415V, 440V) Further labor-saving can be performed in combination with the device below. AK32 : Pneumatic type auto-lifter (It is useful to reduce fatigue since presser foot goes up at the same time as thread trimming.)
51 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks Pneumatic type fl at cutter Device Part No Chain-off thread inlet port in the rear of throat plate securely catches chain- All series of MO-6 S (Excluding MO-6 12S) It is necessary to jointly use chain-off thread suction device. MC-4, MC-8 and MC-9 off thread, and thread cut blade of knife drive performs thread trimming. The remains of chain-off thread is short, and equal and stable finish is obtained. For T041, MC4 (pneumatic type chain-off thread suction device) that is interlocked with operation pedal 49 can be combined. Pneumatic type side cutter Device Part No It is the most suitable thread trimming device for blind hemming or serging of tubular fabric. Chain-off thread is sucked at the side in the rear of the presser foot and the thread is cut, and the secure thread trimming can be performed with the stable working rhythm. For T042, MC4 (pneumatic type chain-off thread suction device) that interlocked with operation pedal can All series of MO-6 04S, MO-6 05S and MO-6 14S Simultaneous replacement parts Presser foot asm. For MO-6 04S-0D4 and 0E4 : For MO-6 04S-0F4 : For MO-6 14S-BD4 and BE4 : Auxiliary feed dog For the models other than those above, this cutter can be used by additionally machining presser foot and auxiliary feed dog as described in the Instruction Manual for T042. It is necessary to jointly use chain-off thread suction device. MC-4, MC-8 and MC-9 be combined.
52 50 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks MO-6 S/T041 MO-6 S/T042 Pneumatic type chain-off thread suction This device works only when the device sewing machine operates, and is a (For T041 and T042 (chain-off thread labor-saving type. cutter), pedal type) (Air source is taken from air When placing orders, specify Model compressor.) "MC-4". This device is used with thread trimming device, T041 or T042, MO-6 S/T040 Pneumatic type chain-off thread suction device (For T040 (automatic chain-off thread trimming device), electromagnetic type) When placing orders, specify Model "MC-5". This device works only when the sewing machine operates, and is a labor-saving type. (Air source is taken from air compressor.) This device is used with thread trimming device, T040. Chain-off thread suction device / Cloth chip suction device Pneumatic type chain-off thread and cloth chips suction device When placing orders, specify Model "MC-8". This device works only when the sewing machine operates, and is a labor-saving type. All series of MO-6 S
53 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks Device with functions of MC-8 and pneumatic type presser lifter When placing orders, specify Model "MC-9". This device works only when the sewing machine operates, and is a labor-saving type. In addition, when depressing the back part of the pedal, presser foot goes up. (Air source is taken from air compressor.) All series of MO-6 S 51 Pneumatic chain-off thread and cloth chips suction device (For T040 (automatic chain-off thread trimming device), electromagnetic type) When placing orders, specify Model "MC-24". This device works only when the sewing machine operates, and is a labor-saving type. This device is used with thread trimming device T040. All series of MO-6 S
54 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks Auto-lifter Electromagnetic type auto-lifter When the back part of the pedal is All series of MO-6 S For 100V : GAK250000AB depressed, the presser foot goes up. For 115V : GAK250000AC Presser lift amount can be adjusted Control box 2 Resistor 3 Presser lifter switch 4 Wire 5 Solenoid For 200V : GAK250000A0 For 220V : GAK250000AE For 240V : GAK250000AD For 380V : GAK250000AF For 415V : GAK250000AG For 440V : GAK250000AH in accordance with the working conditions of processes or the like. It is the labor-saving device that not only lightens the burden of the operator, but also gives full play to the productivity. MO-6 S/T040 Pneumatic type auto-lifter (Presser lifting device for T040 (automatic chain-off thread trimming device)) Device Part No. GAK320000B0 It is useful for reducing fatigue since the presser foot automatically goes up simultaneously with thread trimming. (Air source is taken from air compressor.)
55 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks Air IN Motor clutch lever Air cylinder Pneumatic type auto-lifter (Pedal operating type) It is an independent type, and can be used for all MO series. All series of MO-6 S Motor clutch pedal Connecting rod (asm.) Device Part No. GAK490000A0 53 Motor clutch lever Air nozzle Air IN Motor clutch pedal Air IN Air cylinder Connecting rod (asm.) Pneumatic type auto-lifter with chain-off thread suction device (MC4 is packed together, Pedal operating type) Device Part No. GAK520000A0A When the back part of the pedal is depressed, the presser foot goes up. In addition, it is the labor-saving type since chain-off thread suction works only when the sewing machine operates. (Air source is taken from air compressor.) All series of MO-6 S Pneumatic type auto-lifter (For servo motor) Device Part No. GAKA01000A0 When the back part of the pedal is depressed, the presser foot goes up. (Air source is taken from air compressor.) All series of MO-6 S
56 Model Diagram Name/Device Set Part No. Application and feature Applicable model Simultaneous replacement part/remarks MO-6 16S-DE4-300 MO-6 16S-DE4-40H [Replacement parts] MO-6 16S-FF6-300 MO-6 16S-FF6-40H Presser Main feed MO-6 43S-1D6-40H foot asm. dog DE FF D Differential Throat plate Gathering device Swing-type gathering device (Interlocked with pedal for safety stitch machines) Continuous or partial gathering of materials such as knits, lightweight-knits, georgette, broad cloth, etc. can be performed. DE4 FF6 1D6 feed dog R4508J6ED0B R4612J6FD0A R4612J0DE02 Device Part No. MAS159000A0 Gathering presser opens interlocking with the presser foot pedal to facilitate 54 material setting on the machine. Furthermore, a knee-control type differential feed adjusting device which is used to control a differential feed ratio as desired, is built in the attachment, thereby enabling the operator to make partial gathering Swing type gathering device with ease. (Interlocked with pedal for overlocking MO-6 04S-0E6-300 MO-6 04S-0E6-40H MO-6 04S-0F6-300 MO-6 04S-0F6-500 MO-6 14S-BD6-307 MO-6 14S-BE6-20H MO-6 14S-BE6-307 MO-6 14S-BE6-40H 0E6 0F6 BD6 BE6 Presser foot asm Main feed dog machines) Differential Throat plate Device Part No. MAS160000A0 feed dog 0E R4300J0EE0B 0F R4300J0FE0A BD R4305J0DE0A BE R4305J6EE0A
TK-M700…p†[…c…−…X…g
TK Tape cutter device Machine models M700 Series / TK Series Parts Catalog INTRODUCTION This parts catalog covers the TK Series device. On pages 3-12, each mechanism is arranged on facing pages, the first
More informationEXT.indd
EXT Special Parts EXT00 Series Variable top feed safety stitch machines EXT00 Series Variable top feed overedgers Parts Catalog INTRODUCTION This parts catalog covers the EXT series machine manufactured
More informationUT(W1600).indd
UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations
More informationKSKH(MX).indd
KS/KH Chain cutter device Machine models MX Series Parts Catalog INTRODUCTION This parts catalog covers the KS,KH device which are manufactured in November, 2003. The components are shown on pages 4-7.
More informationC(W)500 AT,TK PB
AT/TK Series Tape cutter (C)W500 WT500 Series (C)W500 WT500 Series Parts Catalog INTRODUCTION This parts catalog covers the (C)W500 WT500 series machine manufactured October, 2001. The components of (C)W500
More informationM800-1.indd
M832 M852 M832 Series Safety stitch machines M852 Series Overedgers Parts Checker 2403100 Except M832 2090840 1 2403361 0045110 9A30710 2700470 2106790 9A30670 2106790 2403361 2095380 2403361 2095370
More informationEX5100.indd
EX100 EX100 Series Cylinder bedoveredgers Parts Catalog INTRODUCTION This parts catalog covers the EX100 series machine manufactured in December, 200. The components of EX100 series are arranged according
More informationAT、TK(EX,EXT,LX).indd
/ Tape cutter device EX3200, EX5200, EX5400, EXT3200 EXT5200, LX3200, LX5200 Series Parts Catalog INTRODUCTION This parts catalog covers the, device which are manufactured in August, 2003. The components
More informationメタルバンドソー
Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4
More informationHG…p†[…c…J…^…“…O
HG Hemming guide device Machine models W(T)664 Series / HG Series Parts Catalog INTRODUCTION This parts catalog covers the HG Series device. On pages 2-37, each mechanism is arranged on facing pages, the
More informationFig. 1 Schematic construction of a PWS vehicle Fig. 2 Main power circuit of an inverter system for two motors drive
An Application of Multiple Induction Motor Control with a Single Inverter to an Unmanned Vehicle Propulsion Akira KUMAMOTO* and Yoshihisa HIRANE* This paper is concerned with a new scheme of independent
More informationTornado Series selection SW TiCN HSS Co FAX VL PM
Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products
More informationCONTENTS 1. INSTALLATION HOW TO SELECT THE FUNCTION OF AUTO-LIFTER HOW TO SELECT THE FUNCTION OF LIFTING THE PRESSER FOOT AFTER THREAD
R Auto-lifter(Side-plate-mounting type) AK141 INSTRUCTION MANUAL / PARTS LIST Read safety instructions carefully and understand them before using. Retain this Instruction Manual for future reference. CAUTION
More information03-01 Senyouki.pdf
Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder
More informationW200テンプレート.indd
W200 Small Cylinder Bed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W200 series machine manufactured in January, 2003. The components of W200 series are arranged
More informationW522.indd
W522 2-Needle flatbed double chainstitch machines Parts Catalog INTRODUCTION This parts catalog covers the W522 series machine manufactured in July, 200. The components of W522 series are arranged according
More informationWE WESB WENB WESNB 428
KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181
These items are using an aluminum alloy cast, so the weight is corrosion-resistant and excel halo tolerance and is light-weight and it's about 1/3 compared with conventional cast iron and made of steel
More informationLC304_manual.ai
Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
More informationFeatures Features FeaturesThread milling cutters 1
Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
More informationw2600.indd
W2600 Cylinderbed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W2600 series machine manufactured in June, 2003. The components of W2600 series are arranged according
More information1 2 3
INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
More information5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se
More informationThread Milling Cutter Series
Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
More information00_1512_SLIMLINE_BOOK.indb
PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity
More information03-03 Bush Mentori.pdf
54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro
Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard
More informationPC_14ZY6_BFT150A_US_ indd
PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any
More information0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
More informationThe hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is es
The hand operated type HB unit is a worm gear drive which may be used for any valve or device requiring a 90 movement. The HB worm gear actuator is especially designed for operation of butterfly, plug
More information<96BC8FCC96A290DD92E82D37>
Integrated Operation & Programming Guidance with extremely simplified operations Integrated Operation & Programming Guidance with extremely simplified operations i FANUC MANUAL GUIDE i is an integrated
More information429
WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B
More informationPRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM
PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach
More information01.eps
444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning
More information32720_MR-03_JSCC_CUP
Before beginning assembly, please read these instructions thoroughly. THE FINEST RADIO CONTROL MODELS R MINI-Z Racer MR-03 Chassis Set ASF.4GHz JSCC CUP Edition Thank you for purchasing the Chassis Set
More informationperature was about 2.5 Ž higher than that of the control irrespective of wind speed. With increasing wind speeds of more than 1m/s, the leaf temperatu
Studies on the Row Covering Methods of Vinylon Cheesecloth to Prevent Cold Injury in Cabbage Daizou IGARASHI*, Masumi OKADA** and Keiichl NAKAYAMA*** *Miura Branch, Kanagawa Horticultural Experiment Station,
More informationMicrosoft Word - PCM TL-Ed.4.4(特定電気用品適合性検査申込のご案内)
(2017.04 29 36 234 9 1 1. (1) 3 (2) 9 1 2 2. (1) 9 1 1 2 1 2 (2) 1 2 ( PSE-RE-101/205/306/405 2 PSE-RE-201 PSE-RE-301 PSE-RE-401 PSE-RE-302 PSE-RE-202 PSE-RE-303 PSE-RE-402 PSE-RE-203 PSE-RE-304 PSE-RE-403
More informationWARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabi
ES-600P Operating Instructions WARNING To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing
More informationalternating current component and two transient components. Both transient components are direct currents at starting of the motor and are sinusoidal
Inrush Current of Induction Motor on Applying Electric Power by Takao Itoi Abstract The transient currents flow into the windings of the induction motors when electric sources are suddenly applied to the
More informationKOMET KUB K2® 小径対応ヘッド交換式ドリル
KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also
More information2
L C -24K 9 L C -22K 9 2 3 4 5 6 7 8 9 10 11 12 11 03 AM 04 05 0 PM 1 06 1 PM 07 00 00 08 2 PM 00 4 PM 011 011 021 041 061 081 051 071 1 2 4 6 8 5 7 00 00 00 00 00 00 00 00 30 00 09 00 15 10 3 PM 45 00
More information1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times t
1) 1) Props of preparation. Wire Scale Spike Cutter Hammer Tape Marker (, ) Rope(For Sezing) 2) 2) Marking A 22 A point Position of twenty-two times the Dia, from the end of the rope. B A B point Position
More informationDevelopment of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake
Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake supplied to the engine, and as such are critical elements
More informationW1500_1.indd
W1500 Flatbed Interlock Stitch Machines Parts Catalog INTRODUCTION This parts catalog covers the W1500 series machine manufactured in June, 2003. The components of W1500 series are arranged according to
More information26
空気 電気 マイクロメータ 26 27 空気 電気 マイクロメータ 28 29 空気 電気 マイクロメータ 30 31 空気 電気 マイクロメータ Dial type air micrometer DI-300 Mist separator and base unit are option. Analogmeter with high visibility applied, thus workshop
More information2
8 23 26A800032A8000 31 37 42 51 2 3 23 37 10 11 51 4 26 7 28 7 8 7 9 8 5 6 7 9 8 17 7 7 7 37 10 13 12 23 21 21 8 53 8 8 8 8 1 2 3 17 11 51 51 18 23 29 69 30 39 22 22 22 22 21 56 8 9 12 53 12 56 43 35 27
More information2
8 22 19A800022A8000 30 37 42 49 2 3 22 37 10 11 49 4 24 27 7 49 7 8 7 9 8 5 6 7 9 8 16 7 7 7 37 10 11 20 22 20 20 8 51 8 8 9 17 1 2 3 16 11 49 49 17 22 28 48 29 33 21 21 21 21 20 8 10 9 28 9 53 37 36 25
More informationアクアEXオイルホールロング(CC2015).indd
High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge
More informationコード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3
BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted
More information内蔵ハードディスクユニット-20GB (PG-HD2E4H) 内蔵ハードディスクユニット-40GB (PG-HD4E4H)取扱説明書 HARD DISK DRIVE 20GB(PG-HD2E4H) HARD DISK DRIVE 40GB(PG-HD4E4H) USER'S GUIDE
B7FY-0351-02 J E J 1 J 1 2 3 2 4 J 3 4 Preface Thank you very much for purchasing the hard disk drive. This hard disk drive provides a IDE interface and can be installed in the 3.5-inch storage bay of
More informationThe Japanese economy in FY2015 suffered from sluggish growth in individual consumption, while the foreign exchange market remained unstable with high volatility. Even in such an economic environment, MSF
More informationIntroduction Purpose This training course describes the configuration and session features of the High-performance Embedded Workshop (HEW), a key tool
Introduction Purpose This training course describes the configuration and session features of the High-performance Embedded Workshop (HEW), a key tool for developing software for embedded systems that
More informationDIN Connector_p2-25.qxd
INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A
More information6 4 4 9RERE6RE 5 5 6 7 8 9 4 5 6 4 4 5 6 8 4 46 5 7 54 58 60 6 69 7 8 0 9 9 79 0 4 0 0 4 4 60 6 9 4 6 46 5 4 4 5 4 4 7 44 44 6 44 8 44 46 44 44 4 44 0 4 4 5 4 8 6 0 4 0 4 4 5 45 4 5 50 4 58 60 57 54
More information2
8 24 32C800037C800042C8000 32 40 45 54 2 3 24 40 10 11 54 4 7 54 30 26 7 9 8 5 6 7 9 8 18 7 7 7 40 10 13 12 24 22 22 8 55 8 8 8 8 1 2 3 18 11 54 54 19 24 30 69 31 40 57 23 23 22 23 22 57 8 9 30 12 12 56
More informationM6B_8B_98B_body.indd
M 6B 8B 9.8B 1. 2. 3. 4. ' 5. 1) """" 6. No. No. 7. "" "" HOW TO USE THIS PARTS LIST 1. This Parts List lists the component parts of the Tohatsu outboard motors. 2. Please keep the Parts List updated
More information6 4 45 7ZS 5 59 7 8 94 05 4 5 6 4 5 5 6 8 8 40 45 48 56 60 64 66 66 68 7 78 80 8 7 8 0 0 0 90 0 57 64 69 66 66 69 0 4 4 4 4 4 0 7 48 5 4 4 5 4 4 4 7 46 46 6 46 8 46 48 46 46 4 46 46 4 4 5 4 6 4 9 9 0
More informationON A FEW INFLUENCES OF THE DENTAL CARIES IN THE ELEMENTARY SCHOOL PUPIL BY Teruko KASAKURA, Naonobu IWAI, Sachio TAKADA Department of Hygiene, Nippon Dental College (Director: Prof. T. Niwa) The relationship
More information植物23巻2号
(J.SHITA)23(2):37-43. 2011. 37 520-0531 1-13-15 Operation Should be Automated and not so in Plant Factory for Leafy Vegetables Touichi OGURA Goodgoal Inc, 1-13-15 Suimei Otsu-shi, Shiga 520-0531, Japan
More informationRR-US470 (RQCA1588).indd
RR-US470 Panasonic Corporation 2006 2 3 4 http://www.sense.panasonic.co.jp/ 1 2 3 ( ) ZOOM 5 6 7 8 9 10 4 2 1 3 4 2 3 1 3 11 12 1 4 2 5 3 1 2 13 14 q φ φ 1 2 3 4 3 1 2 3 4 2 3 15 16 1 2 3 [/]p/o 17 1 2
More information1..FEM FEM 3. 4.
008 stress behavior at the joint of stringer to cross beam of the steel railway bridge 1115117 1..FEM FEM 3. 4. ABSTRACT 1. BackgroundPurpose The occurrence of fatigue crack is reported in the joint of
More information6 4 45 ZS7ZS4ZS 5 59 7 8 94 05 4 5 6 4 5 5 6 8 8 40 45 48 56 60 64 66 66 68 7 78 80 8 7 8 0 0 0 90 0 0 4 4 4 4 6 57 64 69 66 66 66 69 4 0 7 48 5 4 4 5 4 4 4 7 46 46 6 46 8 46 48 46 46 4 46 46 4 4 5 4
More information03-01 Senyouki.pdf
WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F
01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries
More informationÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ
class SCLE HELICOPTER SUPERCOR W-1W ODY KIT INSTRUCTION MNUL SUPERCOR Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive to SUPERCOR.
More information利隆塑料
w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented
More information音響部品アクセサリ本文(AC06)PDF (Page 16)
Guide for Electret Condenser Microphones A microphone as an audio-electric converting device, whose audio pickup section has a structure of a condenser consisting of a diaphragm and a back plate opposite
More information2 3 12 13 6 7
2 8 17 42ZH700046ZH700052ZH7000 28 43 54 63 74 89 2 3 12 13 6 7 3 4 11 21 34 63 65 8 17 4 11 4 55 12 12 10 77 56 12 43 43 13 30 43 43 43 43 10 45 14 25 9 23 74 23 19 24 43 8 26 8 9 9 4 8 30 42 82 18 43
More informationFig. 3 Coordinate system and notation Fig. 1 The hydrodynamic force and wave measured system Fig. 2 Apparatus of model testing
The Hydrodynamic Force Acting on the Ship in a Following Sea (1 St Report) Summary by Yutaka Terao, Member Broaching phenomena are most likely to occur in a following sea to relative small and fast craft
More information<95DB8C9288E397C389C88A E696E6462>
2011 Vol.60 No.2 p.138 147 Performance of the Japanese long-term care benefit: An International comparison based on OECD health data Mie MORIKAWA[1] Takako TSUTSUI[2] [1]National Institute of Public Health,
More information注意 Caution 1) AMT-KS を溶接ロボット等に取り付ける際には 必ず溶接機の電源を OFF にし 電気が流れていないことを確認した後 作業を行ってください Keep off of the welding power source during AMT-KS installation w
溶業資 No.012015-L001 溶接ワイヤ用矯正機 Welding wire straightener 取扱説明書 Instruction manual Ver.1.0-1- 注意 Caution 1) AMT-KS を溶接ロボット等に取り付ける際には 必ず溶接機の電源を OFF にし 電気が流れていないことを確認した後 作業を行ってください Keep off of the welding power
More information206“ƒŁ\”ƒ-fl_“H„¤‰ZŁñ
51 206 51 63 2007 GIS 51 1 60 52 2 60 1 52 3 61 2 52 61 3 58 61 4 58 Summary 63 60 20022005 2004 40km 7,10025 2002 2005 19 3 19 GIS 2005GIS 2006 2002 2004 GIS 52 2062007 1 2004 GIS Fig.1 GIS ESRIArcView
More informationBy Kenji Kinoshita, I taru Fukuda, Taiji Ota A Study on the Use of Overseas Construction Materials There are not few things which are superior in the price and the aspect of the quality to a domestic
More informationK02LE indd
I Linear Stage Table of Contents 1. Features... 1 2. Description of part Number... 1 3. Maximum Speed Limit... 2 4. Specifications... 3 5. Accuracy Grade... 4 6. Motor and Motor Adaptor Flange... 4 6-1
More informationHuawei G6-L22 QSG-V100R001_02
G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/
More information25 II :30 16:00 (1),. Do not open this problem booklet until the start of the examination is announced. (2) 3.. Answer the following 3 proble
25 II 25 2 6 13:30 16:00 (1),. Do not open this problem boolet until the start of the examination is announced. (2) 3.. Answer the following 3 problems. Use the designated answer sheet for each problem.
More informationH8000操作編
8 26 35 32H800037H800042H8000 49 55 60 72 2 3 4 48 7 72 32 28 7 8 9 5 7 9 22 43 20 8 8 8 8 73 8 13 7 7 7 55 10 49 49 13 37 49 49 49 49 49 49 12 50 11 76 8 24 26 24 24 6 1 2 3 18 42 72 72 20 26 32 80 34
More information189 2015 1 80
189 2015 1 A Design and Implementation of the Digital Annotation Basis on an Image Resource for a Touch Operation TSUDA Mitsuhiro 79 189 2015 1 80 81 189 2015 1 82 83 189 2015 1 84 85 189 2015 1 86 87
More informationÉgÉEÉRÉuÉâï\éÜ
60 class SCLE HELICOPTER TOWCOR H-1SIII ODY KIT INSTRUCTION MNUL TOWCOR 60 Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive
More information0801297,繊維学会ファイバ11月号/報文-01-青山
Faculty of Life Environment, Kinjogakuin University, Moriyama-ku, Nagoya 463-8521, Japan Faculty of Home Economics, Japan Women s University, Bunkyo-ku, Tokyo 112-8681, Japan AStudy on Easing by a Variable
More informationVE-GP32DL_DW_ZA
VE-GP32DL VE-GP32DW 1 2 3 4 5 6 1 2 3 4 1 1 2 3 2 3 1 1 2 2 2006 Copyrights VisionInc. @. _ & $ % + = ^ @. _ & $ % + = ^ D11 D12 D21
More information5 7 3AS40AS 33 38 45 54 3 4 5 4 9 9 34 5 5 38 6 8 5 8 39 8 78 0 9 0 4 3 6 4 8 3 4 5 9 5 6 44 5 38 55 4 4 4 4 5 33 3 3 43 6 6 5 6 7 3 6 0 8 3 34 37 /78903 4 0 0 4 04 6 06 8 08 /7 AM 9:3 5 05 7 07 AM 9
More information2
8 23 32A950S 30 38 43 52 2 3 23 40 10 33 33 11 52 4 52 7 28 26 7 8 8 18 5 6 7 9 8 17 7 7 7 38 10 12 9 23 22 22 8 53 8 8 8 8 1 2 3 17 11 52 52 19 23 29 71 29 41 55 22 22 22 22 22 55 8 18 31 9 9 54 71 44
More information可変ピツチプロペラ船の荒天碇泊法単錨泊について
NAOSITE: Nagasaki University's Ac Title 可 変 ピツチプロペラ 船 の 荒 天 碇 泊 法 単 錨 泊 について Author(s) 阿 部, 茂 夫 Citation 長 崎 大 学 水 産 学 部 研 究 報 告, v.20, pp.70-86; 1966 Issue Date 1966-03 URL http://hdl.handle.net/10069/31513
More informationOn the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new e
On the Wireless Beam of Short Electric Waves. (VII) (A New Electric Wave Projector.) By S. UDA, Member (Tohoku Imperial University.) Abstract. A new electric wave projector is proposed in this paper. The
More information4.1 % 7.5 %
2018 (412837) 4.1 % 7.5 % Abstract Recently, various methods for improving computial performance have been proposed. One of these various methods is Multi-core. Multi-core can execute processes in parallel
More informationuntitled
OREC ISSUED NO. SP1000-1 Parts catalogue Spider Mower (EXPORT MODEL) SP1000 MODEL CODE SP1000 0202- CONTENTS HANDLE 1-8 DRIVING & CUTTING 9-12 CHAIN CASE 13 TRANSMISSION 14-22 GEAR FRAME 23 FRONT WHEEL
More information04_学術.indd
Arts and Sciences About a Human Error prevention countermeasure based on Human Factors and Cognitive Psychology. 30178 Key words: Human Factors, Ergonomics, Cognitive Psychology, Risk management, Human
More informationDirect Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m
RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed
More informationTitle < 論文 > 公立学校における在日韓国 朝鮮人教育の位置に関する社会学的考察 : 大阪と京都における 民族学級 の事例から Author(s) 金, 兌恩 Citation 京都社会学年報 : KJS = Kyoto journal of so 14: 21-41 Issue Date 2006-12-25 URL http://hdl.handle.net/2433/192679 Right
More informationW500.indd
W500 Flatbed interlock stitch machines Parts Catalog 2004 09 W500 2 91 94 00 INTRODUCTION This parts catalog covers the W500 series machine manufactured in September, 2004. The components of W500 series
More informationIntroduction Purpose This training course demonstrates the use of the High-performance Embedded Workshop (HEW), a key tool for developing software for
Introduction Purpose This training course demonstrates the use of the High-performance Embedded Workshop (HEW), a key tool for developing software for embedded systems that use microcontrollers (MCUs)
More informationNEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR
NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong
More informationClustering in Time and Periodicity of Strong Earthquakes in Tokyo Masami OKADA Kobe Marine Observatory (Received on March 30, 1977) The clustering in time and periodicity of earthquake occurrence are investigated
More information(1 ) (2 ) Table 1. Details of each bar group sheared simultaneously (major shearing unit). 208
2463 UDC 621.771.251.09 : 621.791.94: 669.012.5 Improvement in Cold Shear Yield of Bar Mill by Computer Control System Koji INAZAKI, Takashi WASEDA, Michiaki TAKAHASHI, and Toshihiro OKA Synopsis: The
More information