Save the Earth with Amorphous! What is an Amorphous Alloy? Common Metallic Alloys Crystalline alloys have periodic atomic structures. Amorphous Alloys
|
|
- しのぶ すみだ
- 5 years ago
- Views:
Transcription
1
2 Save the Earth with Amorphous! What is an Amorphous Alloy? Common Metallic Alloys Crystalline alloys have periodic atomic structures. Amorphous Alloys Non-crystalline (amorphous) alloys have random atomic structures. Image chart of atomic arrangement Domain wall motion is impeded by structural defects such as grain boundaries. Local grain size and direction can be varied by post-fabrication treatments. Image chart of atomic arrangement Randam network of atoms results in lack of crystalline anisotropy. Excellent Soft Magentic Properties. Magnetic properties can be widely changed by heat treatments. Production Process of Amorphous Ribbon Melting Furnace Rapidly Quenched Casting Technology (Quenching Rate: 10 6 /s) Fabricating Molten Alloy into Ribbon without Crystallization Casting Roll Casing Controller Ribbon Winding For safety and the proper use, you are requested to confirm our product specifications or to implement the approval sheet for product specifications before ordering. This catalog and its contents are subject to change without notice.
3 Metglas Amorphous Soft Magnetic Materials/ FINEMET Nanocrystalline Magnetic Materials Downsizing Fe-based amorphous Grain-oriented Silicon Steel Fe-6.5%Si Saturation Induction Bs(T) Fe-based nanocrystalline Permalloy High permeability Fe-Al-Si Permalloy High Bs 0.5 Co-based amorphous Mn-Zn ferrite Coercivity Hc(A/m) Lower energy loss High saturation flux density and high permeability Low magnetostriction Flexibility to control magnetic properties B-H Curve Shape Excellent temperature characteristics and small aging effects What is FINEMET The precursor of FINEMET is amorphous ribbon (non-crystalline) produced by rapid quenching at one million C/second from molten metal consisting of Fe, Si, B and small amount of Cu and Nb. Extremely small and uniform grains, nano-crystalline (~10nm) are obtained by heat treatment of this ribbon above the crystallization temperature. This nano-crystalline structure leads to superior soft magnetic properties than amorphous alloys. It was commonly known that magnetic properties are deteriorated with decrease of grain size. Contrary to his common understanding, FINEMET achieves excellent soft magnetic properties with nano-order crystal grains. Microstructure of FINEMET
4 Properties and Characteristics of Metglas Amorphous Soft Magnetic Materials Material 2605HB1M 2605SA1 Composition Fe-Si-B Fe-Si-B Nominal ribbion width Nominal ribbon thickness Saturation flux density Electrical and Magnetic Characteristics Coercive force 2.0 Electrical resistivity Magnetostriction Curie temp Crystallization temp Physical Characteristics X Tensile strength 2,100 Young's modulus 120 Thermal expansion S3A Fe-Si-B-Cr M Co-Fe-Ni-Si-B-Mo < A Co-Fe-Ni-Si-B < MB Ni-Fe-Mo-B Properties and Characteristics of FINEMET Nanocrystalline Soft Magnetic Materials Material Composition Nominal ribbion width Nominal ribbon thickness Saturation flux density Electrical and Magnetic Characteristics Coercive force Electrical resistivity Magnetostriction Curie temp. Physical Characteristics X 10 3 kg/m 3 FT-3M Fe-Si-B-Cu-Nb < Chemical Compositions and Characteristics of Metglas Brazing Foil Alloy name AWS ASM Standard Cr Nominal Composition Fe Si C* B P Mo Ni Solidus temp. Liquidus temp. Braze temp. X 10 3 kg/m 3 MBF ,103 1, MBF-20 AWS BNi-2 / AMS ,024 1, MBF-30 AWS BNi-3 / AMS ,054 1, MBF-50 AWS BNi-5a ,052 1,144 1, MBF-51 AWS BNi-5b 1.4 1,030 1,126 1, MBF ,045 1,127 1, MBF-60 AWS BNi MBF , MBF-67 2 < , MBF-80 AWS BNi-9 1,048 1,091 1, The characteristics listed on this catalog are representative values and they do not guarantee the quality of the product. Maximum concentration
5 Metglas Brazing Foil (MBF) Features 100% alloy foil (environmentally-friendly with no binder) Foils adhere to joint area. Instant melting and superior wetting and flow. Easy to etch and stamp. Smooth surface after joining. Major Applications Automotive, Catalytic Converter, Heat Exchanger, Honeycomb Body, Aerospace, Mechanical Equipment, Tube Material Brazing, Carbide Alloy, Tool Steel, Rainforcement Brazing Foil Free from Organic Binder As conventional Ni-based brazing alloys are too brittle to be rolled into foil, they previously were utilized in powder filled paste with resin binders and applied to the joint part, whose process was time and labor consuming. On the other hand, Metglas brazing foils can be easily applied in joint parts as they are thin and ductile metallic foils. Easy metal joints can be obtained without using binder paste. Metglas is a registered mark of Metglas,Inc. FINEMET is a registered mark of Hitachi Metals, Ltd. High-Grade Metals Company Soft Magnetic Materials Business Unit Tel: Fax: Head Office SEAVANS North Bldg., 2-1, Shibaura 1-chome, Minato-ku, Tokyo , Japan Tel: Fax: Tel: Fax: Metglas Yasugi Works Hashima-cho, Yasugi-shi, Shimane-ken , Japan TEL : FAX: Allied Drive Conway, SC 29526, U.S.A. Tel: , Fax: Chicago Office 2101 S. Arlington Heights Road Suite 116, Arlington Heights, IL Tel: Fax: Head Office Immermannstrasse 14-16, Duesseldorf, Germany Tel: Fax: Gul Avenue, Singapore Tel: Fax: Plot No 94 & 95, Sector 8, IMT Manesar, Gurgaon , Haryana, India Tel: / / Fax: Units , 22/F., Miramar Tower, 132 Nathan Road, Tsimshatsui, Kowloon, Hong Kong Tel: Fax: Taipei Branch 11F, No.9, Xiangyang Road, Zhongzheng District, Taipei City 10046, Taiwan Tel: Fax: The contact addresses above are current as of May 2014 but are subject to change without notice. If you have difficulty contacting Hitachi Metals, please use the contact information below: Hitachi Metals, Ltd. Corporate Communications. Tel : Fax : Catalog No. HJ-B10-B
渡辺(2309)_渡辺(2309)
[ 29 p. 241-247 (2011)] ** *** ** ** Development of a nickel-based filler metal containing a small amount of silicon by WATANABE Takehiko, WAKATSUKI Ken, YANAGISAWA Atsusi and SASAKI Tomohiro Authors tried
More informationNanocrystalline Fe-based Soft Magnetic Material with High Saturation Flux Density, High Relative Permeability and Low Core Loss Superior to Convention
NOTICE OF DISCLAIMER Information in this brochure does not grant patent right, copyright or intellectual property rights of Hitachi Metals or that of third parties. Hitachi Metals disclaims all liability
More informationファインメット和英併記.indd
NOTICE OF DISCLAIMER 2016.4 Information in this brochure does not grant patent right, copyright or intellectual property rights of Hitachi Metals or that of third parties. Hitachi Metals disclaims all
More informationFig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T
Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.
More informationHigh-reliability metal powder products for high technology applications To create innovative materials that will help build the industrial foundation
Metal Powders and Powder Metallurgy Products SANYO SPECIAL STEEL - the Confident Choice SANYO SPECIAL STEEL High-reliability metal powder products for high technology applications To create innovative
More information特-7.indd
Mechanical Properties and Weldability of Turbine Impeller Materials for High Temperature Exhaust Gas Turbocharger 1 000 1 050 246 IN100 The increase in environmental awareness in recent years has led to
More informationPreface The semiconductor industry has developed remarkably with the rapid progress of micro electronics technology. TANAKA DENSHI KOGYO K.K. has grow
Preface The semiconductor industry has developed remarkably with the rapid progress of micro electronics technology. TANAKA DENSHI KOGYO K.K. has grown in line with global expansion of the semiconductor
More informationContinuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed
Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed a series of researches on continuous cooling transformation
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F
01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries
More informationTornado Series selection SW TiCN HSS Co FAX VL PM
Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products
More information2002-
Application Limits of Flux Cored Arc Welding to Chemical Processing Plants Sumitomo Chemical Co., Ltd. Process & Production Technology Center Takahisa HOSHIKA Hisakazu MORI High efficiency of Flux Cored
More informationメタルバンドソー
Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4
More informationDescription
Metal Hybrid Inductor Description Metal Hybrid Inductor Magnetically shielded Suitable for Large Current Size: 4.3 x 4.3 x H2.1 mm Max. Product weight:.18g (Ref.) Halogen Free available Operating temperature
More informationŁ\”ƒ_−mflF
COAXIAL CONNECTORS CAT.NO.COAX-007H.JAN.2018 Adapter for pin/socket conversion of the same series or connection between connectors of different series. Applicable to various series. A wide variety of types
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
More informationTable 1. Main specifications of VAD plant. Fig. 2. Typical operating pattern of low alloy steel.
UDC 669. 184. 244. 66-251: 669. 046. 554-982 On the Operations of LD-VAD Process and Product Qualities Takaharu MORIYA and Masanori TAWARA Synopsis: VAD (Vacuum Arc Degassing) plant is characterized by
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
More information** Department of Materials Science and Engineering, University of California, Los Angeles, CA 90025, USA) Preparation of Magnetopulmbite Type Ferrite
** Department of Materials Science and Engineering, University of California, Los Angeles, CA 90025, USA) Preparation of Magnetopulmbite Type Ferrite Thin Films by Dip-Coating Method and Magnetic Properties
More informationThe Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Sh
The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Shigeru Kitamura, Member Masaaki Sakuma Genya Aoki, Member
More informationFINEMETカタログ.indd
FINEMET Nanocrystalline Components In addition to FT-3M and FT-3L series, three kinds of series are now available. FT-3K50T FT-8K50D FT-3TL Improved high frequency characteristics Improved DC superposed
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se
More informationweak ferromagnetism observed on Shimotokuyama and Ayumikotan natural crystals behaves as pre dicted by Dzyaloshinsky and Moriya, while Wagasennin and
Magnetic Behavior of a-fe2o3, I. Origin of Weak Ferromagnetism and Magnetic Characteristics Masako IWATA (The Research Institute for Iron, Steel and Other Metals, Tohoku University, Katahiracho, Sendai)
More informationMikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization
Mikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization) in the annealed state of iron-cobalt alloys has been
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181
These items are using an aluminum alloy cast, so the weight is corrosion-resistant and excel halo tolerance and is light-weight and it's about 1/3 compared with conventional cast iron and made of steel
More informationチョークコイル・リアクタ
THIN TRNSORMRS (MPT TYP) OMSTI(JPN) U S I TYP MPT MPT series are available for the thinner-sized sets and suit to I standard. H MPT I KS5535 KS6435 KS7235 KS7250 KS7270 KS9640 KS9660 KS9680 KS00 75.0 67.0
More informationMicrosoft Word - PCM TL-Ed.4.4(特定電気用品適合性検査申込のご案内)
(2017.04 29 36 234 9 1 1. (1) 3 (2) 9 1 2 2. (1) 9 1 1 2 1 2 (2) 1 2 ( PSE-RE-101/205/306/405 2 PSE-RE-201 PSE-RE-301 PSE-RE-401 PSE-RE-302 PSE-RE-202 PSE-RE-303 PSE-RE-402 PSE-RE-203 PSE-RE-304 PSE-RE-403
More informationJFE(和文)No.4-12_下版Gのコピー
JFE No. 4 245 p. 6358 Electrical Steels for Advanced Automobiles Core Materials for Motors, Generators, and High-frequency Reactors SENDA Kunihiro JFE NAMIKAWA JFEMisao HAYAKAWA JFEYasuyuki JNE JNEH JGE
More information* * 2
* * Study on Fire Resistance of Reinforced Concrete Columns with Ultra High Strength Material Munehiro UMEMOTO * Shigemi KIKUTA * The reinforced concrete column made with the high-strength concrete has
More informationHuawei G6-L22 QSG-V100R001_02
G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/
More informationHow to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part
Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192
More informationThe Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch
The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Chikara MINAMISAWA, Nozomu AOKI (Department of Mechanical
More information44 48 2 3 5 kg/m 3 % (GPa) MPa GPa MPa m x -6 / W/(m K) J/(kg K) V/m cm (X -4 ) (X -4 ) JIS C24 JIS C24 JIS R6 JIS R6 JIS R62 JIS R67 JIS R68 JIS R6 JIS R6 JIS C24 A-479 99% White 3.8 3 5.2 3 36.23 3 4
More informationFeatures Features FeaturesThread milling cutters 1
Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons
More informationTable 1. Shape and smelting properties of chrome ores as delivered. Table 2. Chemical composition of chrome ores (%). Table 3. Chemical composition of
UDC 669.263.1: 669.046.462 The Reduction Process and Reducibility of Chromite with Carbon Hiroshi G. KATAYAMA and Akihiko TANAKA Synopsis: In the present work, various chrome ores and relatively pure chromites
More informationJOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna
JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate
More information01.eps
444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning
More informationInfluence of Material and Thickness of the Specimen to Stress Separation of an Infrared Stress Image Kenji MACHIDA The thickness dependency of the temperature image obtained by an infrared thermography
More informationTable 1. Chemical composition of Fe203 and SrCO3 used for experiment. Fig. 1. Process of preparion of the specimen.
Influence of Addition of Some Oxides on the Magnetic Properties of the Strontium Ferrite Magnets Takeshi Anbo, Takahiro Motone, Takashi Furuya and Koichi Sasaki Synopsis Recently high coercivity ferrite
More information1 2 3
INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL
More informationA Contrastive Study of Japanese and Korean by Analyzing Mistranslation from Japanese into Korean Yukitoshi YUTANI Japanese, Korean, contrastive study, mistranslation, Japanese-Korean dictionary It is already
More information10生活環境研究報告.indd
It is well known that there are great differences among the flow characteristics of a non- Newtonian fluid such as gelatinized starch dispersions, depending on the analytical devices used and measurement
More informationT05_Nd-Fe-B磁石.indd
Influence of Intergranular Grain Boundary Phases on Coercivity in Nd-Fe-B-based Magnets Takeshi Nishiuchi Teruo Kohashi Isao Kitagawa Akira Sugawara Hiroyuki Yamamoto To determine how to increase the coercivity
More information日立金属技報 Vol.34
Influence of Misorientation Angle between Adjacent Grains on Magnetization Reversal in Nd-Fe-B Sintered Magnet Tomohito Maki Rintaro Ishii Mitsutoshi Natsumeda Takeshi Nishiuchi Ryo Uchikoshi Masaaki Takezawa
More informationalternating current component and two transient components. Both transient components are direct currents at starting of the motor and are sinusoidal
Inrush Current of Induction Motor on Applying Electric Power by Takao Itoi Abstract The transient currents flow into the windings of the induction motors when electric sources are suddenly applied to the
More informationThread Milling Cutter Series
Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials
More informationThe Evaluation of LBB Behavior and Crack Opening Displacement on Statically Indeterminate Piping System Subjected to Monotonic Load The plastic collap
The Evaluation of LBB Behavior and Crack Opening Displacement on Statically Indeterminate Piping System Subjected to Monotonic Load The plastic collapse and LBB behavior of statically indeterminate piping
More information(1) (2) (3) (4) (5) (6) (7) (8) (9) PLC PLC LAN MASTER PLC LAN MASTER PLC LAN MASTER PLC LAN MASTER PLC LAN MASTER MASTER MASTER PLC LAN PLC LAN PLC LAN MASTER PLC LAN MASTER MASTER TERMINAL MASTER TERMINAL
More informationTable 2 C, Al and Nb contents of samples (%) Table 3 C, Al and Nb contents of samples (%) Table 4 C, Al and Nb contents of samples (%) 6
Study on the Weldability of Ni Base Superalloy (Part 7) Improvement of Hot Crack Sensitivity of Inconel 713C and its Mechanical Properties by Hiroshi Ikawa, Shigeo Shin, Yoshikuni Nakao, Haruo Yawata and
More information20 12,, 59 q r 2 2.1 Fig.2 [3] Fig.3 1cm Fig.2 Schematic of experimental apparatus for measuring interfacial thermal resistance. Fig.3 Surface morphol
58 *1, *1, * 2 Mechanism of Heat Transfer through Mold Flux in Continuous Casting Mold By Hiroyuki Shibata, Shin-ya Kitamura and Hiromichi Ohta 1 K.C.Mills and A.B.Fox [1] [2] Fig.1 q c q r q t q t = q
More information1. Database&Logic 2. 3. Word/Excel/PPT/PDF&Web Ultimate Dictionary 4. Jukkou&Rewrite 5. Convenience&Safety 6. Chinese&Korean 7. Support&Consultation 8
www.jukkou.com 1. Database&Logic 2. 3. Word/Excel/PPT/PDF&Web Ultimate Dictionary 4. Jukkou&Rewrite 5. Convenience&Safety 6. Chinese&Korean 7. Support&Consultation 8. Jukkou Z 9. Introduction Example 10.
More information錫-亜鉛-アルミニウム系鉛フリーはんだの実用化
- Practical Use of Lead-Free Tin-Zinc-Aluminum (Sn-Zn-Al) Solder - - - - - Abstract Fujitsu has implemented a company-wide effort to progressively reduce the use of lead and eventually eliminate this environmental
More information利隆塑料
w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented
More informationSafety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------
More informationJFE技報 No.5 厚板特集号
JFE No. 5 248 37 Minimum Maintenance Steel Plates and Their Application Technologies for Bridge Life-Cycle-Cost Reduction Technologies with Environmental Safeguards for Preser ving Social Infrastructure
More information! " # $ % & ' ( ) +, -. / 0 1 2 3 4 5 6 7 8 9 : ; < = >? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ] ^ _ ` a b c d e f h i j k l m n o p q r s t u v w x y z { } ~ This product is
More informationUDC : ' : '24' : '24'26' : : A Study of Condition of Pits Formation and Their Fe
UDC 620.193: 669.15'26-194.3: 669.15'24'26-194.3: 669.15'24'26'28-194.3: 669.141.24: 621.385.833.2 A Study of Condition of Pits Formation and Their Features in Chloride Solution Norio FUKASAKO, Hirokazu
More informationContents 1 Contents 1 2 USB3.0 Connectors Plug Cables USB Connectors Mini-B Receptacles 3 Plugs HDMI Connectors Type E Receptacles 6 Plu
ELECT R ONIC COMPONENT S IFC07 B-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents 1 Contents 1 2 USB3.0 Connectors Plug Cables 2 3 4 USB Connectors Mini-B Receptacles 3 Plugs 4-5 6 7 HDMI
More informationBull. of Nippon Sport Sci. Univ. 47 (1) Devising musical expression in teaching methods for elementary music An attempt at shared teaching
Bull. of Nippon Sport Sci. Univ. 47 (1) 45 70 2017 Devising musical expression in teaching methods for elementary music An attempt at shared teaching materials for singing and arrangements for piano accompaniment
More informationDIN Connector_p2-25.qxd
INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A
More informationJ. Jpn. Inst. Light Met. 65(6): 224-228 (2015)
65 62015 224 228 ** Journal of The Japan Institute of Light Metals, Vol. 65, No. 6 (2015), 224 228 2015 The Japan Institute of Light Metals Investigation of heat flow behavior on die-casting core pin with
More informationMATERIAL PERFORMANCE INDEX OF ELECTRIC MOTOR STRIP DMS008 DMS009 DMS015 non-halogen (mt) 240~ ~ ~270 (Gs) 2400~ ~ ~2700 (K
CONTENT Product Number Classifications of product Applications 9004001 Electric motor strip (halogen,non-halogen) Precise micro-motors. 9004002 Extrusion magnetic strip Firdge,drinking watermachines,ornaments,toys
More informationLNG Tank-Its Structure, the Materials and Welding Techniques Yasunosuke OGAWA, Mitsuhiro SAKAMOTO, Kiyoaki TOYOMASU, Mitsuo OHYAMA, Munemitsu FUKAGAWA, and Yoshinori SAIGA Table 2. Material list for various
More information磁気測定によるオーステンパ ダクタイル鋳鉄の残留オーステナイト定量
33 Non-destructive Measurement of Retained Austenite Content in Austempered Ductile Iron Yoshio Kato, Sen-ichi Yamada, Takayuki Kato, Takeshi Uno Austempered Ductile Iron (ADI) 100kg/mm 2 10 ADI 10 X ADI
More informationNatural Convection Heat Transfer in a Horizontal Porous Enclosure with High Porosity Yasuaki SHIINA*4, Kota ISHIKAWA and Makoto HISHIDA Nuclear Applie
Natural Convection Heat Transfer in a Horizontal Porous Enclosure with High Porosity Yasuaki SHIINA*4, Kota ISHIKAWA and Makoto HISHIDA Nuclear Applied Heat Technology Division, Japan Atomic Energy Agency,
More informationI N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro
Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard
More information無標題-1
Professional cranes & hoists for lifting SOFT START/STOP Reduction Gear Motor CHENG DAY MACHINERY WORKS CO., LTD. No. 173, Wen Chiu Road, Dajia District, Taichung City, 37 Taiwan. Tel: +88--288-1581 Fax:
More informationKOMET KUB K2® 小径対応ヘッド交換式ドリル
KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also
More information6 4 4 9RERE6RE 5 5 6 7 8 9 4 5 6 4 4 5 6 8 4 46 5 7 54 58 60 6 69 7 8 0 9 9 79 0 4 0 0 4 4 60 6 9 4 6 46 5 4 4 5 4 4 7 44 44 6 44 8 44 46 44 44 4 44 0 4 4 5 4 8 6 0 4 0 4 4 5 45 4 5 50 4 58 60 57 54
More informationRate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been s
Rate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been studied using a volume constant technique. The process
More informationMKT-TAISEI Co.,Ltd.
MKT-TAISEI Co.,Ltd. CONTENTS はやぶさ と共に燃え尽きた アンテナ アンテナ 2.45GHz 4 パッチアンテナ UHF 帯アンテナ 2.4GHz フラットアンテナ 22.5GHz/24GHz/26.5GHz マイクロストリップアレーアンテナ 3 4 5 antenna_contents-04 アンテナ ANTENNA 製品例 2.45GHz 4 Patch Antenna
More informationMIDI_IO.book
MIDI I/O t Copyright This guide is copyrighted 2002 by Digidesign, a division of Avid Technology, Inc. (hereafter Digidesign ), with all rights reserved. Under copyright laws, this guide may not be duplicated
More informationX Y of 6
750W オーダリング インフォメーション 株式会社剣プロダクションサービス 223-0057 横浜市港北区新羽町 1166 TEL: 045-547-2288 FAX: 045-547-2221 http://www.kenpro-inc.com 1 of 6 9 16 9 17 400000 350000 300000 250000 200000 150000 X Y 100000 50000
More informationVol. 21, No. 2 (2014) W 3 mm SUS304 Ni 650 HV 810 HV Ni Ni Table1 Ni Ni μm SUS mm w 50 mm l 3 mm t 2.2 Fig. 1 XY Fig. 3 Sch
110 : 565-0871 2-1 567-0871 11-1 660-0811 1-9 - 1 tanigawa@jwri.osaka - u.ac.jp Influence of Laser Beam Profile on Cladding Layer TANIGAWA Daichi, ABE Nobuyuki, TSUKAMOTO Masahiro, HAYASHI Yoshihiko, YAMAZAKI
More information*1 *2 *1 JIS A X TEM 950 TEM JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbe
*1 *2 *1 JIS A 14812008X TEM 950 TEM 1 2 3 4 JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbestos with Superheated Steam Part 3 An evaluation with
More informationパナソニック技報
Liquid Crystal Display Technology for Realizing Contrast Ratio of 1 million to 1 Katsuhiro Kikuchi LCDLiquid Crystal Display IPSIn-Plane Switching-LCD 2100:1 IPS-LCDIPS-LCD50 20:1 Realization of Liquid
More informationPhoto. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a
Work Rolls in Hot Strip Mills Hidemaro KAWAHARA Synopsis: The work roll materials in hot strip mills and the damages of rolls which arise in rolling operation are discussed in this paper. As for the rolls
More informationA Nutritional Study of Anemia in Pregnancy Hematologic Characteristics in Pregnancy (Part 1) Keizo Shiraki, Fumiko Hisaoka Department of Nutrition, Sc
A Nutritional Study of Anemia in Pregnancy Hematologic Characteristics in Pregnancy (Part 1) Keizo Shiraki, Fumiko Hisaoka Department of Nutrition, School of Medicine, Tokushima University, Tokushima Fetal
More information00_1512_SLIMLINE_BOOK.indb
PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity
More information第1章 溶接法および機器
670 ) ) ) ) 2.1 ) 42 671 Sn T m K. T m. T m. T m 2.2 JIS BAl BPd Al-Si Al-Mn KAlF -K AlF H O Ni 43 672 Sn-In Zn EU RoHS ) Pb Cd Hg JIS Z ( ) ) ) 3.1 44 673. MO HX MX H O M X (d) Young sf lf cos sl sf lf
More informationIntroduction ur company has just started service to cut out sugar chains from protein and supply them to users by utilizing the handling technology of
Standard PA-Sugar Chain Catalogue Masuda Chemical Industries Co., LTD. http://www.mc-ind.co.jp Introduction ur company has just started service to cut out sugar chains from protein and supply them to users
More information75 unit: mm Fig. Structure of model three-phase stacked transformer cores (a) Alternate-lap joint (b) Step-lap joint 3 4)
3 * 35 (3), 7 Analysis of Local Magnetic Properties and Acoustic Noise in Three-Phase Stacked Transformer Core Model Masayoshi Ishida Kenichi Sadahiro Seiji Okabe 3.7 T 5 Hz..4 3 Synopsis: Methods of local
More information6 4 45 7ZS 5 59 7 8 94 05 4 5 6 4 5 5 6 8 8 40 45 48 56 60 64 66 66 68 7 78 80 8 7 8 0 0 0 90 0 57 64 69 66 66 69 0 4 4 4 4 4 0 7 48 5 4 4 5 4 4 4 7 46 46 6 46 8 46 48 46 46 4 46 46 4 4 5 4 6 4 9 9 0
More informationLC304_manual.ai
Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
More informationNEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR
NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong
More informationuntitled
0 3 6 2 1 5 8 3 2 5 inquiry@j-drive-com.jp 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 20% 80% 2005 1999 2002 90% 10% 92% 94% 77% 66% 66% 65% 60% 59% 61% CAD 48% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90%
More information6 4 45 ZS7ZS4ZS 5 59 7 8 94 05 4 5 6 4 5 5 6 8 8 40 45 48 56 60 64 66 66 68 7 78 80 8 7 8 0 0 0 90 0 0 4 4 4 4 6 57 64 69 66 66 66 69 4 0 7 48 5 4 4 5 4 4 4 7 46 46 6 46 8 46 48 46 46 4 46 46 4 4 5 4
More informationJournal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp
58 00847 53 * ** ** Journal of Japan Institute of Light Metals, Vol. 58, No. 008, pp. 47 53 Production of aluminum tall container with flange by hydraulic bulging with compression of surrounding material
More informationPRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM
PRODUCT INFORMATION Highly Efficient FXS Carbide Ball Nose End Mills Vol. 3 PAT.P. FXS-EBT FXS-LS-EBT FXS-PC-EBT FXS-EBM 3 Flutes Series Features Thanks to 3 flutes ball nose geometry, all of that reach
More informationuntitled
SUBJECT: Applied Biosystems Data Collection Software v2.0 v3.0 Windows 2000 OS : 30 45 Cancel Data Collection - Applied Biosystems Sequencing Analysis Software v5.2 - Applied Biosystems SeqScape Software
More informationM-JUSD2471b
JUSD 2471b 2 www.pall.com 3 4 www.pall.com 5 6 www.pall.com 7 TM AllegroSystems The Single-Use Solution Visit us on the Web at www.pall.com/japan/biopharm.asp e-mail us at allegro@pall.com 163-1325 651TEL.03(6386)0995
More informationAl-Si系粉末合金の超塑性
Superplasticity of Al-Si P/M Alloys Satoru Ishihara, Mikio Kondoh, Kazuhiko Itoh Al-17Si-4.5Cu-0.5Mg-(06)Fe-(02)Mm ( Mm : ) (i) (ii) Si(iii) Fe (iv) Mm Al-17Si-4.5Cu-0.5Mg500 10 2 s 1 520 110 1 s 1 Si
More informationLHHBAA+ArialMT Adobe Identity 0
13ヲ ヲオヲァヲャヲ ヲアヲゥヲイ ヲウヲァヲイ ヲェヲエヲ ヲ ヲアヲュヲァヲイヲ ヲクヲイ (ヲウヲ ヲエヲカヲッヲイ 6メ2ヲ ヲエヲウヲ ヲアヲッ) 30965 2009-12-23 ICS: 93.040 1 71 71 71 7 1 71 7 1501-03-05-02-01:2009 1 71 71 71 71 71 71 71 7 TEXNIKH 1 71 71 71 71 71
More informationON A FEW INFLUENCES OF THE DENTAL CARIES IN THE ELEMENTARY SCHOOL PUPIL BY Teruko KASAKURA, Naonobu IWAI, Sachio TAKADA Department of Hygiene, Nippon Dental College (Director: Prof. T. Niwa) The relationship
More informationDevelopment of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake
Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake supplied to the engine, and as such are critical elements
More informationuntitled
1 2 3 4 5 130mm 32mm UV-irradiation UV-cationic cure UV-cationic cure UV-cationic cure Thermal cationic Reaction heat cure Thermal cationic Cation Reaction heat cure Cation (a) UV-curing of
More informationDPA,, ShareLog 3) 4) 2.2 Strino Strino STRain-based user Interface with tacticle of elastic Natural ObjectsStrino 1 Strino ) PC Log-Log (2007 6)
1 2 1 3 Experimental Evaluation of Convenient Strain Measurement Using a Magnet for Digital Public Art Junghyun Kim, 1 Makoto Iida, 2 Takeshi Naemura 1 and Hiroyuki Ota 3 We present a basic technology
More information研究成果報告書
., SUS34 Inconel6, Cr,.,, Cr,. Cr Cr,., Cr,,,.,,,,.,.,,,.,,.,,., SUS34, Inconel6,. (). CoZrNb, -2 m.,., 9. Cu, 2 m. SUS34, Inconel6 SUS34, Inconel6, 5mm mmmm.,,,. (2) (HP8752A).,. - MHz, -2 dbm.,. (3)
More informationFig. 1 Structure of a Sebaceous Follicle (Ref.1).
Importance and Countermeasures for Sebum Control in Application of Makeup Cosmetics Koichi NOMURA POLA Chemical Industries, Inc., R&D Planning Department 27-1, Takashimadai, Kanagawa-ku, Yokohama 221-0833,
More information1..FEM FEM 3. 4.
008 stress behavior at the joint of stringer to cross beam of the steel railway bridge 1115117 1..FEM FEM 3. 4. ABSTRACT 1. BackgroundPurpose The occurrence of fatigue crack is reported in the joint of
More information