Fan Wide lineup including low power consumption fans (9GA type), silent fans (9S type), and high airflow and high static pressure fans. Fan Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination. 9GV 12 12 J 1 1 1 Type name Frame size Voltage Speed code Frame thickness Sensor specifications Frame form Fans with PWM control function 9GV 12 12 P 4 G 1 Type name Frame size Voltage PWM control function Frame thickness Speed code Individual customer s spec (2 to 4 digits) Frame form Type name 9E 9P 9R 9A 9EC 9G 9GA 9GAX 9GV 9GE 9GX 9HV 9HVA 9S 9SG Frame size (mm) 3 4 5 6 8 9 12 13 14 15 17 36 47 57 2 38 38 4 4 52 52 6 6 8 8 92 92 12 12 127 127 14 14 15 15 ø 172 36 36 ø 172 147 ø 172 15 ø 2 (sidecut) (sidecut) Voltage (V) 5 12 24 48 5 12 24 48 etc. Speed code A B C D E F G H J K L M S W etc. Frame thickness (mm) 1 2 3 4 5 6 7 9 7 38 32 28 25 5, 51 2 15 1 Sensor specifications 1 or 1 2 or 2 D1 or D1 With a pulse sensor Without a sensor With a lock sensor Frame form Nil 1 3 Plastic frame: Ribbed frame Plastic frame: Ribless frame 4 4 28 mm for 1U applications Aluminum frame: Ribless frame Plastic frame: Ribbed frame How to Read Specifications ( fan) Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412G71 12 7 to 13.8.17 2.4 131.36 12.7 192.77 42-2 to +7 4/6 C (7/4 C) Rated voltage This is the necessary voltage to drive the fan. E.g.),, 48 V The voltage range over which fan operation is guaranteed. Rated current The current when the fan is operating at rated voltage (at free air). Rated input The power value when the fan is operating at rated voltage (at free air). Rated speed The speed when the fan is operating at rated voltage (at free air). Max. airflow The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device). Airflow is the volume of air generated by the fan per unit of time. Max. static pressure The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device). Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed. SPL SPL stands for Sound Pressure Level. The noise level during the fan's rated operation. Please refer to the technical material section for the measurement method. Operating temperature The temperature range over which fan operation is guaranteed (Non- condensing). Expected life Service life hours that 9% of bearings will survive without failing when continuously operated at the rated voltage and 6 C temperature. Expected life at 4 C is for reference only. For more information, please refer to the technical material section. 11
Fan 36 36 28 mm San Ace 36 9GX/9GV type (Model no.: 9GX3612P3K1 only) / General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 +7 C (Non-condensing, Model no.: 9GX3612P3K1 only), -2 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 46 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GX3612P3K1 12 1.8 to 13.2 1 1.3 15.6 24.69 24.4 838 3.367 66 4/6 C -1 to +6.7.84 32.9 3.2 14..56 32 (7/4 C) * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 556). The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV3612J31.75 9. 19.55 19.4 525 2.18 58.5 12 7. to 13.2-2 to +6 4/6 C 9GV3612G31.34 4.8 14.4 14.1 275 1.14 52. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GX3612P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4. 1 3.5 9 3. 8 7 2.5 6 2. 5 1.5 4 1. 3 2.5 1 % PWM デューティ 1% 5% V.1.2.3.4.5.6.7.8 5 1 15 2 25 4. 1 3.5 9 3. 8 7 2.5 6 2. 1.5 5 4 1. 3 2.5 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V.1.2.3.4.5.6.7.8 5 1 15 2 25 (min -1 ) 25 2 15 1 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 24 min -1 5 32 min -1 1 (%) 12
Airflow - Static Pressure Characteristics 9GV3612J31 With pulse sensor 9GV3612G31 With pulse sensor 7 2.5 6 13.2 V 2. 5 7 V 4 1.5 3 1. 2.5 1 1.5 1..5 4 13.2 V 3 2 7 V 1 Fan 36 mm sq..1.2.3.4.5.6.7 5 1 15 2 25.1.2.3.4.5 5 1 15 2 Dimensions (unit: mm) (With pulse sensor) 36±.5 29.5±.3 4-ø3.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG28 UL 17 +3 32 28±.5 (4) (4) 36±.5 29.5±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 4-ø3.7 29.5±.3 35 ø36.8 29.5±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 35 Options Finger guards page: p. 513 Model no.: 19-15 13
Fan 38 38 28 mm San Ace 38 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 52 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA312P3K1 9GA312P3J1 9GA312P3G1 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.62 7.4 25.6 21.2 8 3.21 59..6.7 3.7 2.5 11.4 15. 12 1.8 to 13.2 1.52 6.2 235.57 2.1 72 2.89 57.5 4/6 C -2 to +7.6.7 3.7 2.5 11.4 15. (7/4 C) 1.33 4. 19.45 15.9 46 1.85 53..6.7 3.7 2.5 11.4 15. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA312P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V 3.5 9 3. 8 PWM デューティ 1% 7 2.5 6 2. 5 1.5 4 1. 3 5% 2.5 1 %.1.2.3.4.5.6.7 5 1 15 2 25 4. 1 PWM PWMduty デューティ cycle 1% 3.5 9 3. 8 7 13.2 V 2.5 6 2. 5 1.5 4 1.8 V 1. 3 2.5 1.1.2.3.4.5.6.7 5 1 15 2 25 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 25 25 min -1 2 15 1 5 3 min -1 1 (%) 14
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA312P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 8 3. 7 2.5 6 2. 5 1.5 1. 4 3 5% 2.5 1 %.1 V PWM デューティ 1%.2.3.4.5.6 5 1 15 2.7 25 3.5 9 8 3. 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1.1.2.3.4.5.6.7 5 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V 1 15 2 25 Voltage: 電圧 : V (min -1 ) PWM frequency: 周波数 :25 khz 25 khz 25 2 15 1 5 3 min -1 1 (%) 235 min -1 Fan 38 mm sq. 9GA312P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 5% % 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 2 15 1 5 3 min -1 19 min -1.1.2.3.4.5 5 1 15.1.2.3 5 1.4.5 15 1 (%) Dimensions (unit: mm) (With ribs) 4-ø3.5±.3 Mounting 取付用穴 hole +3 32 38±.5 3±.3 (1) 3±.3 38±.5 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 15
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 37 3±.3 (16) 4-ø3.7 37.5 (16) 3±.3 37 Options Finger guards page: p. 513 Model no.: 19-165 16
Fan 38 38 28 mm San Ace 38 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -2 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 5 g Fan 38 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV312K31.79 9.48 182.65 23 425 1.77 59 9GV312J31 7 to 13.2.6 7.2 159.57 2 315 1.265 54 9GV312G31 12.4 4.8 135.48 17 22.924 5-2 to +6 4/6 C 9GV312E31.21 2.52 15.37 13.1 13.522 43 4.5 to 13.2 9GV312H31.16 1.92 7.24 8.5 6.241 34 Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics 9GV312K31 With pulse sensor 9GV312J31 With pulse sensor 9GV312G31 With pulse sensor 2. 5 45 4 1.5 35 3 1. 25 2 15.5 1 5 13.2 V 7 V.1.2.3.4.5.6.7.8 5 1 15 2 25 45 4 1.5 35 3 1. 25 2 15.5 1 5 13.2 V 7 V.1.2.3.4.5.6.7.8 5 1 15 2 25 1.25 1..75.5.25 35 3 13.2 V 25 2 7 V 15 1 5.1.2.3.4.5.6.7 5 1 15 2 25 9GV312E31 With pulse sensor 9GV312H31 With pulse sensor.8 2.7.6 15.5.4 1.3.2 5.1 13.2 V 4.5 V.1.2.3.4 5 1 15.5 125.4 1.3 75.2 5.1 25 13.2 V 4.5 V.5.1.15.2.25.3 2 4 6 8 1 17
Dimensions (unit: mm) (With ribs) 38±.5 3±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) 28±.5 (4) +3 32 38±.5 3±.3 (1) Rotating 回転方向 direction リード線 Lead wire AWG26 UL 17 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 37 3±.3 4-ø3.7 (16) 37.5 (16) 3±.3 37 Options Finger guards page: p. 513 Model no.: 19-165 18
Fan 4 4 1 mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 19 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H91.16.8 62.15 5.3 41.2.165 25 5 4.5 to 5.5 19P45M91.11.55 5.12 4.2 27.18 21-1 to +6 4/6 C 19P412H91.7.84 62.15 5.3 41.2.165 25 12 7 to 13.8 19P412M91.6.72 5.12 4.2 27.18 21 Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H91 With pulse sensor 19P45M91 With pulse sensor 19P412H91 With pulse sensor.2.15.1.5 6 5 4 3 2 1 5.5 V 5 V 4.5 V.2.15.1.5 5 4 3 2 1 5.5 V 5 V 4.5 V.25.2.15.1.5 6 5 4 3 2 1 7 V.5.1.15.2 1 2 3 4 5 6 7.5.1.15.2 1 2 3 4 5 6 7.5.1.15.2 1 2 3 4 5 6 7 19P412M91 With pulse sensor.2.15.1.5 5 4 3 2 1 7 V.5.1.15.2 1 2 3 4 5 6 7 19
Dimensions (unit: mm) +1 4 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole +1 1 (3) (3) +3 32 +1 4 32±.3 (1) Rotating 回転方向 direction Lead リード線 wire AWG26 UL 17 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (15) 4-ø3.7 38.5 (15) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 2
Fan 4 4 15 mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 28 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 4/6 C 9GA412P7G1 12 1.2 to 13.8 1.17 2.4 131.36 12.7 192.77 42-2 to +7 (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412G71.17 2.4 131.36 12.7 192.77 42 12 7 to 13.8 9GA412H71.6.72 73.2 7.1 59.6.24 28 Other sensor specifications are available as options. Refer to the index (p. 551). -2 to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 V 1.2 3 PWM PWMduty デューティ cycle 1% (min -1 ) 15 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 1. 25 1. 25 131 min -1.8 2.6 15.4 1.2 5 PWM デューティ 1% 5%.8.6.4.2 2 15 1 5 1.2 V 1 5.1.2.3 5 1.4 15.5.1.2.3.4 5 1 15.5 1 (%) 21
Airflow - Static Pressure Characteristics 9GA412G71 With pulse sensor 9GA412H71 With pulse sensor 1.2 1..8.6.4.2 3 25 2 15 1 5 7 V.1.2.3.4.5 5 1 15 V V.4.3.2.1 1 9 8 7 6 5 4 3 2 1.5.1.15.2 7 V 2 4 6 8.25 Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø3.5±.3 Mounting 取付用穴 hole 15.2±.5 (4) (4) +3 32 4±.3 32±.3 (1) 32±.3 4±.3 Lead リード線 wire AWG28 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 22
Fan 4 4 15 mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 32 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected iife Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H71.28 1.4 77.18 6.4 75.5.33 28-2 to +6 5 4.5 to 5.5 6/6 C 19P45M71.21 1.5 65.15 5.3 52.9.213 24 19P412R71 7 to 13.8.13 1.56 97.227 8. 111.9.449 34 4/6 C 19P412S71.18 2.16 86.2 7.6 92.1.369 32 12-2 to +7 19P412H71 1.2 to 13.8.13 1.56 77.18 6.4 75.5.33 28 6/6 C 19P412M71.95 1.14 65.15 5.3 52.9.213 24 19P424H71 24 2.4 to 27.6.8 1.92 77.18 6.4 75.5.33 28 Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H71 With pulse sensor 19P45M71 With pulse sensor 19P412R71 With pulse sensor.6 15.5.4 1.3.2 5.1 5.5 V 5 V 4.5 V.3.25.2.15.1.5 8 6 4 2 5.5 V 5 V 4.5 V.8 2.7.6 15.5.4 1.3.2 5.1 7 V.1.2.3 2 4 6 8 1.1.2.3 2 4 6 8 1 2.1.2.3 4 6 8 1 23
Airflow - Static Pressure Characteristics 19P412S71 With pulse sensor 19P412H71 With pulse sensor 19P412M71 With pulse sensor.6.5.4.3.2.1 15 1 5 1.2 V.6 15.5.4 1.3.2 5.1 1.2 V.3.25.2.15.1.5 8 6 4 2 1.2 V +1 4 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) +1 15 (4) +3 32 +1 4 32±.3.1.2.3.1.2.3.1.2.3 2 4 6 8 1 2 4 6 8 1 2 4 6 8 1 19P424H71 With pulse sensor.6 15.5.4.3.2.1 1 5 2.4 V.1.2.3 2 4 6 8 1 Dimensions (unit: mm) Rotating 回転方向 direction (1) Lead リード線 wire AWG24 UL 17 Airflow 風吹出方向 direction 24
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 4-ø3.7 (15) 38.5 (15) 32±.3 39 Fan 4 mm sq. Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 25
Fan 4 4 2 mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 35 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA45P6H1** 1.35 1.75 124.33 11.7 191.77 4 4/6 C 5 4.5 to 5.5 9GA45P6F1** 1.18.9 8.21 7.4 79.5.32 28 6/6 C 1.23 2.76 16.42 14.8 318 1.28 47 9GA412P6G1 4/6 C.4.48 38.1 3.5 17.9.7 14 1.14 1.68 124.33 11.7 191.77 4 9GA412P6H1 12 1.2 to 13.8.4.48 38.1 3.5 17.9.7 14-2 to +7 6/6 C 1.8.96 8.21 7.4 79.5.32 28 9GA412P6F1.3.36 22.6 2.1 6..2 1 9GA424P6G1** 1.13 3.12 16.42 14.8 318 1.28 47 4/6 C 9GA424P6H1** 24 2.4 to 27.6 1.8 1.92 124.33 11.7 191.77 4 6/6 C 9GA424P6F1** 1.4.96 8.21 7.4 79.5.32 28 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA45P6H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 1. 25.8 2.6 15.4 1.2 5 5% 5 5 V V PWM デューティ 1% 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM PWMduty デューティ cycle 1% 5.5 V 5 V 4.5 V Voltage: 電圧 :5 5 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 14 12 1 8 6 4 2 124 min -1.1.2.3.4 2 4 6 8 1 12 14.1.2.3.4 2 4 6 8 1 12 14 1 (%) 26
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA45P6F1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12.4 1 8.3 PWM デューティ 6 1%.2 4.1 2 5% 5 5 VV 12 PWM PWMduty デューティ cycle 1%.4 1 5.5 V 8.3 6 5 V.2 4 4.5 V.1 2 電圧 Voltage: :55 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 14 12 1 8 8 min -1 6 4 2 Fan 4 mm sq..1.2 2 4 6 8.3 1.1.2.3 2 4 6 8 1 1 (%) 9GA412P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.6 1.4 1.2 1..8.6.4.2 1.2 1..8.6.4.2 3 25 2 15 1 5.3.2.1 4 35 3 25 2 15 1 5 12.4 1 8 6 4 2 % % PWM デューティ 1% 5% V.1.2.3.4 2 4 6 8 1 12 14 % PWM デューティ 1% 5% PWM デューティ 1% 5%.1.2 2 4 6 8 V.1.2.3.4.5 5 1 15 V 9GA412P6H1 With pulse sensor with PWM control function PWM 9GA412P6F1 With pulse sensor with PWM control function PWM.3 1 1.6 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 4 5.1 PWM PWMduty デューティ cycle 1%.2.3 5 1 1.2 V.4 15.5 PWM PWMduty デューティ cycle 1% 1.2 1. 25.8 2.6.4.2 3 15 1 5.4 1.3.2.1 12 8 6 4 2 1.2 V.1.2.3.4 2 4 6 8 1 12 14 PWM PWM duty デューティ cycle 1% 1%.1 1.2 V.2 2 4 6 8.3 1 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 16 min -1 14 12 1 8 6 4 38 min -1 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :12 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 14 12 124 min -1 1 8 6 4 38 min -1 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :12 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 14 12 1 8 8 min -1 6 4 2 22 min -1 1 (%) 27
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA424P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.8 45 1.6 4 1.4 35.1.2 1.2 3 1. 25.8 2.6.4 15 1 PWM デューティ 1%.2 5 5% 12 5 1 15 2.1 V.2.3.4 2 4 6 8 1 12 14.4 1.3.2 8 6 PWM デューティ 1% 4.1 2 5%.1.2 V 1.2 3 1..8 25 2 PWM デューティ 1%.6 15.4 1.2 5 5%.3.4.5.6 24 V.3 2 4 6 8 1 9GA424P6H1 With pulse sensor with PWM control function PWM 9GA424P6F1 With pulse sensor with PWM control function PWM 1.8 45 1.6 4 1.4 35 1.2 3 12 PWM 1% PWMデューティ1% 1.2 1. 3 25.8 2.6 15 2.4 V.4 1.2 5.1.2.3.4.5.6 5 1 15 2 PWM PWMduty デューティ cycle 1% 1. 25.8 2.6 15.4 1 2.4 V.2 5.1.2.3.4 2 4 6 8 1 12 14 PWM PWMduty デューティ cycle 1%.4 1.3 8 6.2 2.4 V 4.1 2.1.2.3 2 4 6 8 1 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 :24 V PWM 周波数 frequency: :25 khz 25 khz 16 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :24 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 14 12 124 min -1 1 8 6 4 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :24 V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 14 12 1 8 8 min -1 6 4 2 1 (%) 28
Dimensions (unit: mm) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole +3 32 (1) Fan 4 mm sq. 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 29
Fan 4 4 2 mm San Ace 4 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45J61.46 2.3 98.28 9.9 98.5.396 39 4/6 C 19P45H61.32 1.6 8.225 8. 65.7.264 33 5 4.5 to 5.5-2 to +7 19P45F61.25 1.25 65.183 6.5 45.1.181 28 6/6 C 19P45M61.12.6 5.136 4.8 26.5.16 24 19P412G61.28 3.36 125.35 12.4 153.8.618 44 4/6 C -2 to +6 19P412D61.18 2.16 11.31 1.9 124.498 42 19P412E61 7 to 13.8.13 1.56 92.26 9.2 87.3.351 37 12 19P412H61.11 1.32 8.225 8. 65.7.264 33 6/6 C -2 to +7 19P412F61.9 1.8 65.183 6.5 45.1.181 28 19P412M61 8 to 13.8.6.72 5.136 4.8 26.5.16 24 19P424G61 12 to 27.6.15 3.6 125.35 12.4 153.8.618 44-2 to +6 4/6 C 19P424D61 12 to 27.6.13 3.12 11.31 1.9 124.498 42 19P424H61 24 12 to 27.6.7 1.68 83.233 8.2 69.6.28 35 19P424F61 14 to 27.6.6 1.44 65.183 6.5 45.1.181 28-2 to +7 6/6 C 19P424B61 2.4 to 27.6.6 1.44 52.14 4.9 28.3.114 25 Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45J61 With pulse sensor 19P45H61 With pulse sensor 19P45F61 With pulse sensor (inch H2O) (Pa) 13.5 12.45 11.4 1.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 5.5 V 5 V 4.5 V.1.2.3.4.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1.1.2.3 2 4 6 8 1 12 14 2 4 6 8 1 2 4 6 8 1 5.5 V 5 V 4.5 V.25.2.15.1.5 6 4 2.1 5.5 V 5 V 4.5 V.2.3 3
Airflow - Static Pressure Characteristics 19P45M61 With pulse sensor 19P412G61 With pulse sensor 19P412D61 With pulse sensor.2.175.15.125.1.75.5.25 5 4 3 2 1.5 5.5 V 5 V 4.5 V.1.15.2 1 2 3 4 5 6 7.9 22.8 2.7 18 16.6 14.5 12.4 1 7 V.3 8.2 6 4.1 2.1.2.3.4.5 2 4 6 8 1 12 14 16 18.7.6.5.4.3.2.1 18 16 14 12 1 8 6 4 2 7 V.1.2.3.4 2 4 6 8 1 12 14 Fan 4 mm sq. 19P412E61 With pulse sensor 19P412H61 With pulse sensor 19P412F61 With pulse sensor.5 12 (inch H2O).4 (Pa) 1.25 6.4.3.2.1 1 8 6 4 2 7 V.3.2.1 8 6 4 2 7 V.2.15.1.5 4 2 7 V 2.1.2.3 4 6 8 1.1.2.3 2 4 6 8 1.1.2.3 2 4 6 8 1 19P412M61 With pulse sensor 19P424G61 With pulse sensor 19P424D61 With pulse sensor 4.15.125 3.1.75 2 8 V.5 1.25.5.1.15.2 1 2 3 4 5 6 7.8 2.7 18.6 16 14.5 12.4 1.3 8 6.2 4.1 2.1.2.3.4 2 4 6 8 1 12 14.7.6.5.4.3.2.1 16 14 12 1 8 6 4 2.1.2.3.4 2 4 6 8 1 12 14 19P424H61 With pulse sensor 19P424F61 With pulse sensor 19P424B61 With pulse sensor.4 1 8.3 6.2 4.1 2.25 6.2 4.15.1 2.5 14 V 4.15 3.1 2.5 1 2.4 V.1.2.3 2 4 6 8 1.1.2.3 2 4 6 8 1.5.1.15.2 1 2 3 4 5 6 7 31
Dimensions (unit: mm) +1 4 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole (4) リード線 Lead wire AWG24 UL 17 +3 32 2±.5 (4) +1 4 32±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 4-ø3.7 (15) 38.5 (15) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 32
Fan 4 4 28 mm San Ace 4 9HV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 6 g Fan 4 mm sq. Specifications The models listed below have pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9HV412P3K1 12 1.8 to 12.6 1 1.52 18.3 25.83 29.3 11 4.42 65.2 2.4 75.25 8.8 99.4 37-2 to +6 4/6 C * PWM frequency: 25 khz Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 14 V 5. 4. 3. 12 1 8 PWM デューティ 1% 6 2. 4 5% 1. 2 %.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 14 5. 12 4. 1 3. 2. 1. 8 6 4 2 PWM PWMduty デューティ cycle 1% 1% 12.6 V 1.8 V.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 3 25 25 min -1 2 15 1 75 min -1 5 1 (%) Dimensions (unit: mm) 8-ø3.5±.3 Mounting 取付用穴 hole +3 32 4±.3 32±.3 (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 4±.3 4±.3 28±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 33
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.5) 4-ø3.7 4-R2.85 ø42.8 (17.5) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 34
Fan 4 4 28 mm San Ace 4 9GAX type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 53 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 1.3 15.6 25.9 31.8 1 4.2 64 9GAX412P3S1** 2.7.84 44.155 5.5 32.125 21.5 1.8 to 12.6 1 1.3 15.6 25.9 31.8 1 4.2 64 9GAX412P3S3.11 1.32 78.26 9.2 87.35 38 12-2 to +6 3/6 C 1.92 11.4 22.81 28.6 8 3.21 61 9GAX412P3K1** 2.7.84 42.15 5.3 28.11 21 1.8 to 13.2 1.92 11.4 22.81 28.6 8 3.21 61 9GAX412P3K3.1 1.2 65.24 8.5 7.28 32 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GAX412P3S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4.5 11 V 4. 1 3.5 9 PWM デューティ 8 3. 1% 7 2.5 6 2. 1.5 5 4 1. 3 2.5 1 2%.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 4.5 11 4. 1 3.5 9 3. 8 7 2.5 6 2. 1.5 5 4 1. 3 2.5 1 PWM PWM duty デューティ cycle 1% 1% 12.6 V 1.8 V.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz 25 25 min -1 2 15 1 5 44 min -1 1 (%) 35
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GAX412P3S3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V 4.5 11 4. 1 3.5 9 8 3. 7 PWM デューティ 2.5 6 1% 2. 5 1.5 4 1. 3 2.5 1 %.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 4.5 11 4. 1 3.5 9 3. 8 7 2.5 6 2. 1.5 5 4 1. 3 2.5 1 PWM PWM duty デューティ cycle 1% 1% 12.6 V 1.8 V.1.2.3.4.5.6.7.8.9 1. 5 1 15 2 25 3 35 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz (min -1 ) 25 25 min -1 2 15 1 78 min -1 5 1 (%) 9GAX412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4. 1 V 3.5 9 8 3. 7 PWM デューティ 2.5 1% 6 2. 1.5 5 4 3 1. 2.5 2% 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 4. 3.5 3. 2.5 2. 1.5 1..5 1 9 8 7 6 5 4 3 2 1 PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 22 min -1 2 15 1 5 42 min -1 1 (%) 9GAX412P3K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example V 4. 1 3.5 9 8 3. 7 2.5 PWM デューティ 6 1% 2. 5 1.5 4 3 1. 2.5 % 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 4. 3.5 3. 2.5 2. 1.5 1..5 1 9 8 7 6 5 4 3 2 1 PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz 22 min -1 2 15 1 65 min -1 5 1 (%) 36
Dimensions (unit: mm) (With ribs) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole +3 32 (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 4-ø3.7 (17.6) 4 (17.6) 32±.3 39 Fan 4 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 37
Fan 4 4 28 mm San Ace 4 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 53 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA412P3K1 1.92 11.4 22.81 28.6 799 3.21 61.1 1.2 65.23 8.12 68.27 32-2 to +6 3/6 C 9GA412P3J1 1.49 5.88 18.67 23.7 535 2.15 54.5.6 45.16 5.7 33.13 22 9GA412P3G1 12 1.8 to 13.2 1.39 4.68 165.61 21.5 45 1.81 53.5.6 45.16 5.7 33.13 22 9GA412P3H1 1.28 3.36 145.54 19.1 347 1.39 5.4.48 35.13 4.6 2.8 17 9GA412P3M1 1.21 2.52 125.46 16.2 258 1.4 47.4.48 35.13 4.6 2.8 17-2 to +7 4/6 C 9GA424P3J1** 1.27 6.48 18.67 23.7 535 2.15 54 9GA424P3G1** 1.22 5.28 165.61 21.5 45 1.81 53 24 21.6 to 26.4 9GA424P3H1** 1.16 3.84 145.54 19.1 347 1.39 5 9GA424P3M1** 1.11 2.64 125.46 16.2 258 1.4 47 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P3K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4. 3.5 3. 2.5 2. 1.5 1..5 V 1 9 8 7 6 PWM デューティ 5 1% 4 3 2 % 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 4. 1 PWM PWMduty デューティ cycle 1% 3.5 9 3. 8 7 2.5 6 13.2 V 2. 5 1.5 1. 4 3 2 1.8 V.5 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 Voltage: 電圧 : V PWM (min -1 ) 周波数 frequency: :25 khz 25 khz 22 min -1 2 15 1 65 min -1 5 1 (%) 38
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA412P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 % PWM デューティ 1% 5% V 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) 2 15 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 45 min -1 18 min -1 Fan 4 mm sq..1.2.3.4.5.6.7.8 5 1 15 2 25.1.2.3.4.5.6.7.8 5 1 15 2 25 1 (%) 9GA412P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 %.1.2.3.4 PWM デューティ 1% 5% V.5.6.7 5 1 15 2 25.8.1.2.3.4.5.6.7.8 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V 5 1 15 2 25 (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 45 min -1 1 (%) 165 min -1 9GA412P3H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1.5 1..5 4 3 2 1 PWM デューティ 1% 5% %.1.2.3.4.5.6.7 5 1 15 2 1.5 1..5 4 3 2 1 13.2 V 1.8 V.1.2.3.4.5.6.7 5 1 15 2 15 1 5 145 min -1 35 min -1 1 (%) 9GA412P3M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.25.5.25 35 3 1. 25.75 2 15 1 5 % PWM デューティ 1% 5% V.1.2.3.4.5.6.1.2.3.4.5.6 5 1 15 2 1.25 1..75.5.25 35 3 25 2 15 1 5 PWM PWM duty デューティ cycle 1% 1% 13.2 V 1.8 V 5 1 15 2 (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 35 min -1 1 (%) 125 min -1 39
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA424P3J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 5% 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWM duty デューティ cycle 1% 1% 26.4 V 21.6 V (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 18 min -1.1.2.3.4.5.6.7.8 5 1 15 2 25.1.2.3.4.5.6.7.8 5 1 15 2 25 1 (%) 9GA424P3G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 5% 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 165 min -1.1.2.3.4.5.6.7.8 5 1 15 2 25.1.2.3.4.5.6.7.8 5 1 15 2 25 1 (%) 9GA424P3H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1.5 1..5 4 3 2 1 PWM デューティ 1% 5% 1.5 1..5 4 3 2 1 26.4 V 21.6 V 15 1 5 145 min -1.1.2.3.4.5.6.7 5 1 15 2.1.2.3.4.5.6.7 5 1 15 2 1 (%) 9GA424P3M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 35 1.25 3 1. 25.75 2 15.5 1.25 5 V PWM デューティ 1% 5% 35 1.25 3 1. 25 2.75 15.5 1.25 5 PWM 1% PWMデューティ1% 26.4 V 21.6 V (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 125 min -1 4.1.2.3.4.5.6 5 1 15 2.1.2.3.4.5.6 5 1 15 2 1 (%)
Dimensions (unit: mm) (With ribs) 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole +3 32 (1) 32±.3 4±.3 Lead リード線 wire AWG26 UL 17 (4) 28±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Fan 4 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 41
Fan 4 4 28 mm San Ace 4 9GE type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 55 g Specifications The models listed below have pulse sensors with PWM control function. Model no. 9GE412P3K3 9GE412P3J3 9GE412P3G3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.84 1.8 165.76 26.8 415 1.666 58.7.84 3.13 4.6 13.52 17 12 1.8 to 13.2 1.65 7.8 15.69 24.4 343. 1.378 56.5.6 265.12 4.2 1.7.42 14-2 to +6 4/6 C 1.47 5.64 13.6 21.2 26 1.44 52.5.6 24.11 3.9 8.2.33 13 Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GE412P3K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 1.75 1.5 1.25 1..75.5.25 45 4 35 3 25 2 15 1 5.2 %.4 V PWM デューティ 1% 5%.6.8 5 1 15 2 25 3 PWM PWMduty デューティ cycle 1% 2. 5 1.75 45 4 1.5 35 1.8 V 1.25 3 1. 25.75 2.5 15 1.25 5.3.6.9 5 1 15 2 25 3 (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 3 min -1 1 (%) 165 min -1 42
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GE412P3J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) 1.6 1.4 1.2 1..8.6.4.2 (Pa) 4 35 3 25 2 15 1 5 % 5% V PWM デューティ 1%.2.4.6.8 5 1 15 2 25 3 PWM PWMduty デューティ cycle 1% 1.6 4 1.4 35 13.2 V 1.2 3 1. 25 1.8 V.8 2.6 15.4 1.2 5.2.4.6.8 5 1 15 2 25 3 (min -1 ) 2 15 1 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 265 min -1 1 (%) 15 min -1 Fan 4 mm sq. 9GE412P3G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.5 35 1.25 3 1. 25 2.75 15.5 1.25 5 V PWM デューティ 1% 5% %.1.2.3.4.5.6.7 5 1 15 2 25 1.75 4 1.5 35 1.25 3 1. 25 2.75 15.5 1.25 5 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V.2.4.6.8 5 1 15 2 25 3 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 2 15 13 min -1 1 5 24 min -1 1 (%) Dimensions (unit: mm) 8-ø3.5±.3 Mounting 取付用穴 hole 4±.3 28±.5 4±.3 +3 32 4 ±.3 32 ±.3 (1) 32 ±.3 4 ±.3 Lead リード線 wire AWG28 UL 161 Rotating 回転方向 direction Airflow 風吹出方向 direction 43
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 44
Fan 4 4 28 mm San Ace 4 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -2 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 5 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV412K31 1.8 to 12.6.84 1.8 165.76 26.8 415 1.668 58 9GV412J31.6 7.2 147.68 24. 33 1.325 55-2 to +6 9GV412G31 12.47 5.64 13.6 21.1 26 1.44 52 4/6 C 7 to 13.2 9GV412H31.31 3.72 116.53 18.7 27.831 49 9GV412C31.15 1.8 83.37 13.1 1.42 41-2 to +7 Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics 9GV412K31 With pulse sensor 9GV412J31 With pulse sensor 9GV412G31 With pulse sensor 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5.1.2.3.4.5.6.7.8 12.6 V 1.8 V 5 1 15 2 25 3 1.75 1.5 1.25 1..75.5.25 45 4 35 13.2 V 3 25 2 15 7 V 1 5.1.2.3.4.5.6.7.8 5 1 15 2 25 3 1.5 1.25 1..75.5.25 4 35 13.2 V 3 25 2 7 V 15 1 5.1.2.3.4.5.6.7.8 5 1 15 2 25 3 45
Airflow - Static Pressure Characteristics 9GV412H31 With pulse sensor 9GV412C31 With pulse sensor 1.2 1..8.6.4.2 3 25 2 13.2 V 15 1 7 V 5.1.2.3.4.5.6 2 4 6 8 1121416182 4±.3 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG26 UL 17 +3 32 28±.5 (4) (4) 4±.3 32±.3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 39 32±.3 (17.6) 4-ø3.7 4 (17.6) 32±.3 39 16.6 14.5 12 13.2 V.4 1.3 8 6.2.1 4 2 7 V.1.2.3.4 2 4 6 8 1 12 14 16.5 Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 46
Fan 4 4 28 mm San Ace 4 9P type Model 19P424R313 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 52 g Fan 4 mm sq. Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P45H313.68 3.4 87.32 11.3 12.9.414 37 4/6 C 5 4.5 to 5.5 19P45F313.28 1.4 67.244 8.6 58.8.236 3-2 to +7 6/6 C 19P412K313 8 to 13.2.55 6.6 155.59 2.8 34 1.365 5 19P412J313.35 4.2 125.46 16.2 21.843 44 7 to 13.2 19P412G313.31 3.72 115.42 14.8 179.719 42-2 to +6 4/6 C 19P412B313 12.28 3.36 13.38 13.4 143.574 4 19P412H313 7 to 13.8.195 2.34 87.32 11.3 12.9.414 37 19P412F313.15 1.26 67.244 8.6 58.8.236 3-2 to +7 6/6 C 19P412M313 1.2 to 13.8.45.54 41.15 5.3 21.6.87 2 19P424R313.25 6 14.51 18. 263.4 1.57 47 19P424J313.18 4.32 125.46 16.2 21.843 44 12 to 26.4-2 to +6 4/6 C 19P424G313.19 4.56 115.42 14.8 179.719 42 24 19P424B313.13 3.12 13.38 13.4 143.574 4 19P424H313 12 to 27.6.95 2.28 87.32 11.3 12.9.414 37 19P424F313 14 to 27.6.55 1.32 67.244 8.6 58.8.236 3-2 to +7 6/6 C Other sensor specifications are available as options. Refer to the index (pp. 543 to 544). Airflow - Static Pressure Characteristics 19P45H313 With pulse sensor 19P45F313 With pulse sensor 19P412K313 With pulse sensor 15.6.4.2 1 5 5.5 V 5 V 4.5 V.1.2.3.4 5 1 15.35 9.3 8 7.25 6.2.15.1 5 4 3 2.5 1 5.5 V 5 V 4.5 V.1.2.3 2 4 6 8 1 1.6 4 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 13.2 V 8 V.1.2.3.4.5.6.7 5 1 15 2 25 47
Airflow - Static Pressure Characteristics 19P412J313 With pulse sensor 19P412G313 With pulse sensor 19P412B313 With pulse sensor 25.1 1. 25.8 2.8.6.4.2 (inch H2O).6.4.2 1.2 1..8.6.4.2 2 15 1 5 (Pa) 15 1 5 3 25 2 15 1 5.1 7 V.1.2.3.4 5 1 15 26.4 V 13.2 V 7 V.2.3.4.5 5 1 15 2.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1.8.6.4.2.1.8.6.4.2 2 15 1 5.1.2.3.4.5 5 1 15 2 25 2 15 1 5 7 V 13.2 V 7 V.1.2.3 2 4 6 8 1 26.4 V.6.4.2 15 1 5.15.1.5 4 3 2 1 1..8.6.4.2 25 2 15 1 5 7 V.1.2.3.4.5 5 1 15 19P412H313 With pulse sensor 19P412F313 With pulse sensor 19P412M313 With pulse sensor 1.2 V.5.1.15.2 1 2 3 4 5 6 7 19P424R313 With pulse sensor 19P424J313 With pulse sensor 19P424G313 With pulse sensor 26.4 V.1.2.3.4.5.6 5 1 15 2.1.2.3.4.5 5 1 15 2.1.2.3.4.5 5 1 15 2 19P424B313 With pulse sensor 19P424H313 With pulse sensor 19P424F313 With pulse sensor 48.8.6.4.2 2 15 1 5 26.4 V.1.2.3.4.5 5 1 15.6 15.4 1.2 5.1.2.3.4 5 1 15.35 9.3 8 7.25 6.2.15 5 4.1 3 2.5 1 14 V.1.2.3 2 4 6 8 1
Dimensions (unit: mm) 4±.5 32±.3 4±.5 32±.3 4-ø3.5±.3 Mounting 取付用穴 hole +3 32 (1) 28±.5 (4) (4) Inlet side, Outlet side 39 32±.3 (15) 4-ø3.7 38.5 (15) 32±.3 39 Fan 4 mm sq. Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Model no.: 19-59, 19-59H 49
Fan 52 52 15 mm San Ace 52 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 4 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA512P7G1.13 1.56 78.5 17.7 91.5.367 38 9GA512P7A1.8.96 63.4 14.1 59.237 32 12 1.2 to 13.8 1 9GA512P7H1.5.6 43.275 9.7 27.5.11 22 9GA524P7A1.5 1.2 63.4 14.1 59..237 32 24 2.4 to 27.6 1 9GA524P7H1.3.72 43.275 9.7 27.5.11 22 9GA512P7M1.4.48 34.215 7.6 17.68 16 9GA524P7G1.7 1.68 78.5 17.7 91.5.367 38-2 to +7 4/6 C 9GA524P7M1.2.48 34.215 7.6 17..68 16 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 551). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA512P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.5 12.4 1 8.3 6.2 4.1 2 V PWM デューティ 1% 5%.5 12.4 1 8.3 6.2 4.1 2 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 78 min -1.1.2.3.4.5.6 5 1 15 2.1.2.3.4.5.6 5 1 15 2 1 (%) 5
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA512P7A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4.3.2.1 1 8 6 4 2 5% V PWM デューティ 1%.4.3.2.1 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 8 6 4 2 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 63 min -1 Fan 52 mm sq..1.2.3.4.5 5 1 15.1.2.3.4.5 5 1 15 1 (%) 9GA512P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.15.1.5.5.4.3.2.1 4 3 2 1 3 25 2 15 1 5 12 1 8 6 4 2 5% 5 1 15 5% V PWM デューティ 1%.1.2.3.4 5%.1.2 V PWM デューティ 1%.3 2 4 6 8 1 V PWM デューティ 1% 9GA512P7M1 With pulse sensor with PWM control function PWM 1.2 1..8.6.4.2 9GA524P7G1 With pulse sensor with PWM control function PWM Static 静圧 pressure.15.1.5 4 3 2 1 1.2 1..8.6.4.2.5.4.3.2.1 3 25 2 15 1 5 12 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 1.2 V.1.2.3.4 5 1 15 PWM PWMduty デューティ cycle 1% 1.2 V.1.2.3 2 4 6 8 1 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 6 5 4 3 2 1 (min -1 ) 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) 6 5 4 3 2 1 (%) Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (%) 43 min -1 PWM duty - Speed characteristics example 34 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 78 min -1.1.2.3.4.5.6 5 1 15 2.1.2.3.4.5.6 5 1 15 2 1 (%) 51
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA524P7A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1 V.4 1 PWM PWMduty デューティ cycle 1% (min -1 ) 8 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz.3.2.1 8 6 4 2 PWM デューティ 1% 5%.3.2.1 8 6 4 2 2.4 V 6 4 2 63 min -1.1.2.3.4.5 5 1 15.1.2.3.4.5 5 1 15 1 (%) 9GA524P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.15.1.5 4 3 2 1 V PWM デューティ 1% 5% Static 静圧 pressure.15.1.5 4 3 2 1 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 43 min -1.1.2.3.4 5 1 15.1.2.3.4 5 1 15 1 (%) 9GA524P7M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 V 1.2 3 PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1..8.6.4.2 25 2 15 1 5 PWM デューティ 1% 5% 1..8.6.4.2 25 2 15 1 5 2.4 V 5 4 3 2 1 34 min -1.1.2.3 2 4 6 8 1.1.2.3 2 4 6 8 1 1 (%) 52
Dimensions (unit: mm) 52±.5 42±.3 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 42±.3 52±.5 Rotating 回転方向 direction (1) Lead リード線 wire AWG26 UL 17 (3) (3) 15±.5 Airflow 風吹出方向 direction Inlet side, Outlet side 5.4 42±.3 ø53 5.4 42±.3 Fan 52 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 4-ø4.5 Options Finger guards page: p. 513 Model no.: 19-149, 19-149E 53
Fan 52 52 15 mm San Ace 52 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 55 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P55M71 5 4.5 to 5.5.15.75 37.25 7.24 21.4.86 22 6/6 C 19P512A71 1.2 to 13.8.21 2.52 68.375 13.25 69.7.28 36 4/6 C -2 to +7 19P512H71 12.1 1.2 46.255 9. 31.9.128 27 7 to 13.8 6/6 C 19P512M71.7.84 37.25 7.24 21.4.86 22 19P524A71.11 2.64 68.375 13.24 69.7.28 36-2 to +6 4/6 C 19P524H71 24 14 to 27.6.5 1.2 46.255 9. 31.9.128 27-2 to +7 6/6 C 19P524M71.4.96 37.25 7.24 21.4.86 22 Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P55M71 With pulse sensor 19P512A71 With pulse sensor 19P512H71 With pulse sensor.12 3.1.8 2.6.4 1.2 5.5 V 5 V 4.5 V.1.2.3 2 4 6 8 1.4.35.3.25.2.15.1.5 1 9 8 7 6 5 4 3 2 1 1.2 V.1.2.3.4.5 2 4 6 8 1 12 14 16 18.2 5 4.15 3.1 2.5 1 7 V.1.2.3 2 4 6 8 1 54
Airflow - Static Pressure Characteristics 19P512M71 With pulse sensor 19P524A71 With pulse sensor 19P524H71 With pulse sensor.12.1.8.6.4.2.12.1.8.6.4.2 3 2 1 3 2 1 7 V.1.2 2 4 6 8 19P524M71 With pulse sensor 14 V.4 4-ø3.7±.3 Mounting 取付用穴 hole 52±.5 42±.3 Lead リード線 wire AWG24 UL 17 (3) +1 15 (3) +5 3 52±.5 42±.3.35.3.25.2.15.1.5 1 9 8 7 6 5 4 3 2 1 14 V.1.2.3.4.5 2 4 6 8 1 12 14 16 18.2.15.1.5 5 4 3 2 1 14 V.1.2.3 2 4 6 8 1 Fan 52 mm sq..1.2 2 4 6 8 Dimensions (unit: mm) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 55
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 51 42±.3 (24) 4-ø3.7 53 (24) 42±.3 51 Options Finger guards page: p. 513 Model no.: 19-149, 19-149E 56
Fan 6 6 1 mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 35 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612G91 7. to 13.2.27 3.24 62.62 21.9 66.26 43-2 to +6 9GA612H91 12.14 1.68 5.5 17.6 42.9.17 37-2 to +7 7. to 13.8 9GA612L91.3.36 23.23 8.1 9.1.37 17-1 to +7 Other sensor specifications are available as options. Refer to the index (p. 551). 4/6 C 7/4 C Airflow - Static Pressure Characteristics 9GA612G91 With pulse sensor 9GA612H91 With pulse sensor 9GA612L91 With pulse sensor.3.25.2.15.1.5 8 7 6 5 4 3 2 1.1.2 5 7 V.3.4.5 13.2 V.6.7.8 (inch H2O).3.25.2.15.1.5 (Pa) 8 7 6 5 4 3 2 1 7 V.1.2.3.4.5.6.7.8 1 15 2 25 5 1 15 2 25 2 4 6 8 1 (inch H2O).6.5.4.3.2.1 (Pa) 16 14 12 1 8 6 4 2 7 V.5.1.15.2.25.3 57
Dimensions (unit: mm) 4-ø4.3±.3 Mounting 取付用穴 hole 6±.5 5±.3 +5 3 5±.3 6±.5 (1) リード線 Lead wire AWG28 UL 17 (3) (3) 1±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 4-ø4.5 58 5±.3 ø63 5±.3 58 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 58
Fan 6 6 15 mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Model 9GA624P7G1 is not TÜV certified. Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 5 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.16 1.92 59.68 24 8.32 38 9GA612P7G1.5.6 15.17 6. 5.2.2 1 12 1.2 to 13.8 4/6 C 1.1 1.2 49.56 19.7 55.6.223 34-2 to +7 9GA612P7H1 (7/4 C).3.36 13.15 5.3 3.9.15 8 9GA624P7G1** 24 2.4 to 27.6 1.8 1.92 59.68 24. 8.32 38 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612G71.16 1.92 59.68 24 8.32 38 9GA612H71.1 1.2 49.56 19.7 55.6.223 34 12 6 to 13.8 9GA612M71.8.96 39.45 15.9 35.3.142 28 9GA612L71.3.36 28.31 1.9 18.72 17 9GA624M71 24 12 to 27.6.5 1.2 39.45 15.9 35.3.142 28 Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). -2 to +7 4/6 C (7/4 C) 6/6 C 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.45 11.4 1.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 % V PWM デューティ 1% 5%.1.2.3.4.5.6.7.8 5 1 15 2 25 3 PWM PWM duty デューティ cycle 1% 1%.45 11.4 1.35 9.3 8 7.25 6.2 5.15 4 1.2 V.1 2 3.5 1.1.2.3.4.5.6.7.8 5 1 15 2 25 3 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 59 min -1 5 4 3 2 15 min -1 1 1 (%) 59
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P7H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.3.25.2.15.1.5 8 7 6 5 4 3 2 1 % 5% 12 V PWM デューティ 1%.1.2.3.4.5.6.7 5 1 15 2 25 8.3 7.25 6.2 5.15 4 3.1 2.5 1 PWM PWMduty デューティ cycle 1% 1.2 V.1.2.3.4.5.6.7 5 1 15 2 25 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 49 min -1 4 3 2 13 min -1 1 1 (%) 9GA624P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.45 11.4 1.35 9 8 PWM デューティ.3 7 1%.25 6.2 5.15 4 3.1 5% 2.5 1.1.2.3.4.5.6.7.8 5 1 15 2 25 3 PWM PWMduty デューティ cycle 1%.45 11.4 1.35 9.3 8 7.25 6.2 5.15 4 2.4 V.1 2 3.5 1.1.2.3.4.5.6.7.8 5 1 15 2 25 3 (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 59 min -1 1 (%) 9GA612G71 With pulse sensor 9GA612H71 With pulse sensor 9GA612M71 With pulse sensor.4.35.3.25.2.15.1.5 11 1 9 8 7 6 5 4 3 6 V 2 1.1.2 8.3 7.25 6.3.4.5 5 1 15 2 25.6.7.8.2.15.1.5 5 4 3 2 1 6 V.1.2.3.4.5.6.7 5 1 15 2.2 5 4.15 3.1 2.5 1 6 V.1.2.3.4.5 2 4 6 8 1 12 14 16 18 9GA612L71 With pulse sensor 9GA624M71 With pulse sensor.12 3.2 5.1.8.6.4.2 25 2 15 1 5 6 V.15.1.5 4 3 2 1 6.5.1.15.2.25.3.35.4 2 4 6 8 1 12 14.1.2.3.4.5 2 4 6 8 1 12 14 16 18
Dimensions (unit: mm) (With pulse sensor with PWM control function) 6±.5 4-ø4.5±.3 Mounting 取付用穴 hole 5±.3 Lead リード線 wire AWG28 UL 17 +5 3 (3) 15±.5 (3) Fan 6 mm sq. (1) 5±.3 Airflow 風吹出方向 direction Rotating 回転方向 direction 58 5±.3 4-ø4.7 ø63 5±.3 58 6±.5 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 61
Fan 6 6 15 mm San Ace 6 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 6 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P65H71.26 1.3 41.4 14.1 38.2.153 32 5 4.5 to 5.5 19P65M71.15.75 31.3 1.6 22.6.91 25-2 to +7 6/6 C 19P612K71.26 3.12 65.62 21.9 99.3.399 45-2 to +6 1.2 to 13.8 19P612S71.15 1.8 5.48 17. 58.8.236 36 4/6 C 19P612H71 12 7 to 13.8.9 1.8 41.4 14.1 38.2.153 32-2 to +7 19P612M71.7.84 31.3 1.6 22.6.91 25 1.2 to 13.8 19P612B71.5.6 22.21 7.42 11.7.47 21 6/6 C 19P624J71.14 3.36 62.61 21.5 86.5.347 44-2 to +6 4/6 C 19P624S71 14 to 27.6.8 1.92 5.48 16.9 58.8.236 36 24 19P624H71.6 1.44 41.4 14.1 38.2.153 32-2 to +7 6/6 C 19P624M71 2.4 to 27.6.4.96 31.3 1.6 22.6.91 25 Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P65H71 With pulse sensor 19P65M71 With pulse sensor 19P612K71 With pulse sensor 6.2 5 4.15 3.1 2.5 1 5.5 V 5 V 4.5 V.1.2.3.4.5 2 4 6 8 1 12 14 16.12 3.1.8 2.6.4 1.2 5.5 V 5 V 4.5 V.1.2.3.4 2 4 6 8 1 12 14.55 13.5 12.45 11.4 1.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1.1 1.2 V.2.3.4.5.6.7.8 5 1 15 2 25 3 62
Airflow - Static Pressure Characteristics 19P612S71 With pulse sensor 19P612H71 With pulse sensor 19P612M71 With pulse sensor 8.3 7.25 6.2 5.15 4 3.1 2.5 1 1.2 V.1.2.3.4.5.6 2 4 6 8 1121416182 6.2 5 4.15 3.1 2.5 1 7 V.1.2.3.4.5 2 4 6 8 1 12 14 16.16 4.14.12 3.1.8 2.6.4 1.2 1.2 V.1.2.3.4 2 4 6 8 1 12 14 Fan 6 mm sq. 19P612B71 With pulse sensor 19P624J71 With pulse sensor 19P624S71 With pulse sensor.8.6.4.2.35 2.5 12 8.3 7.4 1 15.25 6 8.3.2 5 14 V 14 V 1 6.15 4.2 3 1.2 V 4.1 5 2.1 2.5 1.1.2.3 (m.1.2.3.4.5.6.7 3 /min).1.2.3.4.5.6 2 4 6 8 1 5 1 15 2 25 2 4 6 8 1 12 14 16 18 2 22 19P624H71 With pulse sensor 19P624M71 With pulse sensor 6.2 5 4.15 3.1 2.5 1 14 V.1.2.3.4.5 2 4 6 8 1 12 14 16.16 4.14.12 3.1.8 2.6.4 1.2 2.4 V.1.2.3.4 2 4 6 8 1 12 14 63
Dimensions (unit: mm) 4-ø4.3±.3 Mounting 取付用穴 hole +1 6 5±.3 +1 6 5±.3 (4) Lead リード線 wire AWG24 UL 17 +5 3 +1 15 (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 4-ø4.5 58 5±.3 ø63 5±.3 58 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 64
Fan 6 6 2 mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 7 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612P6G1 1.26 3.12 685.88 31.1 125.5 43 12 1.8 to 13.2 9GA612P6S1 1.15 1.8 55.7 24.7 81.33 36 4/6 C -2 to +7 9GA624P6G1 1.12 2.88 685.88 31.1 125.5 43 (7/4 C) 24 21.6 to 26.4 9GA624P6S1 1.7 1.68 55.7 24.7 81.33 36 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA612H61.9 1.8 41.52 18.4 45.18 29 12 1.8 to 13.2 9GA612M61.5.6 27.34 12. 2.8 18-2 to +7 6/6 C 9GA624H61.4.96 41.52 18.4 45.18 29 24 21.6 to 26.4 9GA624M61.3.72 27.34 12. 2.8 18 Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 16.6 14.5 12.4 1.3.2.1 8 6 4 2 V PWM デューティ 1% 5% 16.6 14.5 12.4 1.3.2.1 8 6 4 2 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V (min -1 ) 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 685 min -1.2.4.6.8 1. 5 1 15 2 25 3 35.2.4.6.8 1. 5 1 15 2 25 3 35 1 (%) 65
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P6S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1.3.2.1 16.6 14.5 12.4 1.3.2.1 8 6 4 2 8 6 4 2.1.2.3.4.5.6.7.8 5 1 15 2 25.2.4 V PWM デューティ 1% 5% V PWM デューティ 1% 5%.6.8 1. 5 1 15 2 25 3 35 9GA624P6G1 With pulse sensor with PWM control function PWM.4 1.3.2.1.3.2.1 8 6 4 2 16.6 14.5 12.4 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V.1.2.3.4.5.6.7.8 5 1 15 2 25 8 6 4 2.2 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V.4.6.8 1. 5 1 15 2 25 3 35 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 55 min -1 5 4 3 2 1 1 8 7 6 5 4 3 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 685 min -1 1 (%) 9GA624P6S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1 8.3 6.2 4.1 2 V PWM デューティ 1% 5%.4 1 8.3 6.2 4.1 2 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 55 min -1.1.2.3.4.5.6.7.8 5 1 15 2 25.1.2.3.4.5.6.7.8 5 1 15 2 25 1 (%) 9GA612H61 With pulse sensor 9GA612M61 With pulse sensor 9GA624H61 With pulse sensor 6 V V V.12 3 6.2.15.1.5 5 4 3 2 1 13.2 V 1.8 V.1.8.6.4 25 2 15 1.2 5 13.2 V 1.8 V.2.15.1.5 5 4 3 2 1 26.4 V 21.6 V 66.1.2.3.4.5.6 5 1 15 2.1.2.3.4 2 4 6 8 1 12 14.1.2.3.4.5.6 5 1 15 2
Airflow - Static Pressure Characteristics 9GA624M61 With pulse sensor.12.1.8.6.4.2 5 3 25 26.4 V 2 15 21.6 V 1 V Fan 6 mm sq..1.2.3.4 2 4 6 8 1 12 14 Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG26 UL 17 6±.5 5±.3 +5 3 5±.3 6±.5 Rotating 回転方向 direction 4-ø4.5 58 5±.3 ø63 5±.3 58 (1) (4) (4) 2±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 67
Fan 6 6 2 mm San Ace 6 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P612W61 6 to 16.13 1.56 42.42 14.8 31.8.128 31 19P612H61 12.13 1.56 42.42 14.8 31.8.128 31 1.2 to 13.8 19P612M61.9 1.8 32.3 1.6 18.8.76 25 6/6 C 19P624W61 12 to 3.7 1.68 42.42 14.8 31.8.128 31-2 to +7 19P624H61 24.7 1.68 42.42 14.8 31.8.128 31 2.4 to 27.6 19P624M61.5 1.2 32.3 1.6 18.8.76 25 19P648H61 48 43 to 53.7 3.36 56.55 19.4 52.9.212 41 4/6 C Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P612W61 With pulse sensor 19P612H61 With pulse sensor 19P612M61 With pulse sensor.2.15.1.5 6 5 4 3 2 1 6 V 16 V.2.4.6.2.18.16.14.12.1.8.6.4.2 5 4 3 2 1.2.4.6 5 1 15 2 5 1 15 2 5 1 15 1.2 V.12.1.8.6.4.2 3 2 1 1.2 V.1.2.3.4.5 68
Airflow - Static Pressure Characteristics 19P624W61 With pulse sensor 19P624H61 With pulse sensor 19P624M61 With pulse sensor.2.15.1.5 6 5 4 3 2 1 3 V.2.4.6 5 1 15 2.2.18.16.14.12.1.8.6.4.2 5 4 3 2 1 2.4 V.2.4.6 5 1 15 2.12.1.8.6.4.2 3 2 1 2.4 V.1.2.3.4.5 5 1 15 Fan 6 mm sq. 19P648H61 With pulse sensor 7.25 6.2 5 4.15 3.1 2.5 1 53 V 48 V 43 V.2.4.6 5 1 15 2 Dimensions (unit: mm) +1 6 2-1 4-ø4.3±.3 Mounting 取付用穴 hole 5±.3 (3) (5) リード線 Lead wire AWG24 UL 17 +1 6 5±.3 +5 3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 69
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 4-ø4.5 58 5±.3 ø63 5±.3 58 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 7
Fan 6 6 25 mm San Ace 6 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 55 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S612S41.2 2.4 5.74 26.1 65.7.26 31 5. to 13.8 9S612H41.11 1.32 39.58 2.5 4..16 24 12-1 to +7 4/6 C 9S612F41.8.96 33.49 17.3 29.3.12 2 6. to 13.8 9S612M41.7.84 27.4 14.1 19.7.8 16 Other sensor specifications are available as options. Refer to the index (p. 557). Airflow - Static Pressure Characteristics 9S612S41 With pulse sensor 9S612H41 With pulse sensor 9S612F41 With pulse sensor.5 12.4 1.3 8 6.2 4.1 2 5 V.25 6.2 5 4.15 3.1 2.5 1 5 V.25 6.2 5 4.15 3.1 2.5 1 6 V.2.4.6.8 1. 1.2 1 2 3 4.1.2.3.4.5.6.7 5 1 15 2 25.1.2.3.4.5.6.7 5 1 15 2 25 9S612M41 With pulse sensor.125 3.1 25 2.75 15.5 1.25 5 6 V.1.2.3.4.5.6.7 5 1 15 2 25 71
Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 17 (3) 25±.5 (3) 6±.5 5±.3 +5 3 (1) 5±.3 6±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 4-ø4.5 29.7 62.7 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 72
Fan 6 6 25 mm San Ace 6 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 9 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.67 8.4 11 1.4 49.4 3 1.2 53 9G612P4S1.7.84 33.42 14.8 27.11 19 12 1.2 to 13.8 1.5 6. 95 1.21 42.7 224.9 49 9G612P4H1.6.72 285.36 12.7 2.2.8 18 1.34 8.16 11 1.4 49.4 3 1.2 53 4/6 C 9G624P4S1-2 to +7.4.96 33.42 14.8 27.11 19 (7/4 C) 24 2.4 to 27.6 1.25 6. 95 1.21 42.7 224.9 49 9G624P4H1.4.96 285.36 12.7 2.2.8 18 9G648P4S1 48 36 to 72 1.18 8.64 11 1.4 49.4 35 1.22 53.2.96 33.42 14.8 27.4.11 19 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 548 to 549). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9G612P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.6.2 4 5 % V 1.4 35 1.2 3 1. 25 PWM デューティ 1%.8 2.6 15.4 1 5%.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 1.6 4 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM duty デューティ cycle 1% 1.2 V.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 12 11 11 min -1 1 9 8 7 6 5 4 3 33 min -1 2 1 1 (%) 73
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9G612P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 1..8.6.4.2 1.6 1.4 1.2 1..8.6.4.2 1.2 1..8.6.4.2 3 25 2 15 1 5 4 35 3 25 2 15 1 5 3 25 2 15 1 5 %.2.4.6.8 1. 1.2 1.4 1 2 3 4 % V PWM デューティ 1% 5%.2.4.6.8 1. 1.2 1.4 1 2 3 4 V PWM デューティ 1% 5% 5.2.4.6.8 1. 1.2 1.4 1.6 1 % 2 3 4 V 5 5 9G624P4S1 With pulse sensor with PWM control function PWM PWM デューティ 1% 5% 9G624P4H1 With pulse sensor with PWM control function PWM 1.2 1..8 2.6 15.4 1.2 1.2 1..8 2.6 15.4 1.2 3 25 5 1.6 4 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 3 25 5 PWM duty デューティ cycle 1% PWM duty デューティ cycle 1% 1.2 V.2.4.6.8 1. 1.2 1.4 1 2 3 2.4 V 2.4 V 4 5.2.4.6.8 1. 1.2 1.4 1.6 1 PWM duty デューティ cycle 1% 2 3 4 5.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 95 min -1 9 8 7 6 5 4 3 285 min -1 2 1 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 12 11 1 9 8 7 6 5 4 3 2 1 1 (%) PWM duty - Speed characteristics example 33 min -1 1 (%) 11 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 95 min -1 9 8 7 6 5 4 3 285 min -1 2 1 1 (%) 9G648P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 74 1.6 1.4 1.2 1..8.6.4.2 4 35 3 25 2 15 1 5 48 V V PWM デューティ 1% 5% %.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 1.6 1.4 1.2 1..8 2.6 15.4 1.2 4 35 3 25 5 PWM duty デューティ cycle 1% 48 V/72 V 36 V.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 (min -1 ) 12 11 1 9 8 7 6 5 4 3 2 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 11 min -1 33 min -1 1 (%)
Dimensions (unit: mm) (With ribs) 6±.5 5±.3 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 (1) Lead リード線 wire AWG26 UL 143 Fan 6 mm sq. 5±.3 6±.5 (3) 25±.5 (3) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 4-ø4.5 62.7 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 75
Fan 6 6 25 mm San Ace 6 9R type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19R65H41.34 1.7 38.53 18.7 4.2.161 28-2 to +7 19R65F41 5 4.5 to 5.5.2 1. 32.44 15.5 29.4.118 24-2 to +6 6/6 C 19R65M41.13.65 26.36 12.7 19.6.79 2-2 to +7 19R612J41.47 5.64 76 1.6 37.1 155..622 44-2 to +6 4/6 C 1.8 to 13.2 19R612G41.24 2.88 56.78 27.5 87.3.351 39 19R612D41 1.2 to 13.8.21 2.52 515.72 25.4 73.5.295 37 19R612S41 12.17 2.4 46.65 23. 56.8.228 33 19R612H41 6 to 13.8.11 1.32 38.53 18.7 4.1.161 28-2 to +7 6/6 C 19R612F41.9 1.8 32.44 15.5 29.4.118 24 19R612M41 7 to 13.8.6.72 26.36 12.7 19.6.79 2 19R624J41 21.6 to 26.4.24 5.76 76 1.6 37.1 155..622 44-2 to +6 19R624G41 2.4 to 27.6.13 3.12 56.78 27.5 87.3.351 39 4/6 C 19R624D41.12 2.88 515.72 25.4 73.5.295 37 19R624S41 24.8 1.92 46.65 23. 56.8.228 33 12 to 27.6-2 to +7 19R624H41.6 1.44 38.53 18.7 4.2.161 28 6/6 C 19R624F41.5 1.2 32.44 15.5 29.4.118 24 19R624M41 14 to 27.6.4.96 26.36 12.7 19.6.79 2 19R648J41 43.2 to 52.8.12 5.76 76 1.6 37.1 155..622 44 19R648G41 48 43 to 53.7 3.36 56.78 27.5 87.3.351 39-2 to +6 4/6 C 19R648H41 4 to 53.4 1.92 38.53 18.7 4.2.161 28-2 to +7 6/6 C Other sensor specifications are available as options. Refer to the index (p. 545). Airflow - Static Pressure Characteristics 19R65H41 With pulse sensor 19R65F41 With pulse sensor 19R65M41 With pulse sensor 6.16 4.12 3.2.15.1.5 5 5.5 V 4 5 V 3 4.5 V 2 1.1.2.3.4.5.6.7 5 1 15 2 25.14.12.1.8.6.4.2 3 2 1 5.5 V 5 V 4.5 V.1.2.3.4.5.6 5 1 15 2.1.8.6.4.2 25 5.5 V 2 5 V 15 4.5 V 1 5.1.2.3.4 5 1 15.5 76
Airflow - Static Pressure Characteristics 19R612J41 With pulse sensor 19R612G41 With pulse sensor 19R612D41 With pulse sensor.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 13.2 V 1.8 V.2.4.6.8 1. 1.2 1.4 5 1 15 2 25 3 35 4 45.45.4.35.3.25.2.15.1.5 11 1 9 8 7 6 5 4 3 2 1 13.2 V 1.8 V.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3.4.3.2.1 1 8 6 4 2 1.2 V.1.2.3.4.5.6.7.8 5 1 15 2 25 3 Fan 6 mm sq. 19R612S41 With pulse sensor 19R612H41 With pulse sensor 19R612F41 With pulse sensor.3.25.2.15.1.5 8 7 6 5 4 3 2 1 6 V.2.4.6.8 5 1 15 2 25 3.2.15.1.5 6 5 4 3 2 1 6 V.1.2.3.4.5.6.7 5 1 15 2 25.18.16.14.12.1.8.6.4.2 4 3 2 1 6 V.1.2.3.4.5.6 5 1 15 2 19R612M41 With pulse sensor 19R624J41 With pulse sensor 19R624G41 With pulse sensor.12.1.8.6 3 25 2 15 7 V.4.2 1 5.1.2.3.4.5 5 1 15 2.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 26.4 V 21.6 V.2.4.6.8 1. 1.2 1.4 5 1 15 2 25 3 35 4 45.5.45.4.35.3.25.2.15.1.5 12 11 1 9 8 7 6 5 4 3 2 1 2.4 V.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 19R624D41 With pulse sensor 19R624S41 With pulse sensor 19R624H41 With pulse sensor.4.3.2.1 1 8 6 4 2.1.2.3.4.5.6.7.8 5 1 15 2 25 3.3.25.2.15.1.5 8 7 6 5 4 3 2 1.2.4.6.8 5 1 15 2 25 3.2.15.1.5 6 5 4 3 2 1.1.2.3.4.5.6.7 5 1 15 2 25 77
Airflow - Static Pressure Characteristics 19R624F41 With pulse sensor 19R624M41 With pulse sensor 19R648J41 With pulse sensor.18.16.14.12.1.8.6.4.2 4 3 2 1.1.2.3.4.5.6 5 1 15 2.12.1.8.6 3 25 2 15 14 V.4.2 1 5.1.2.3.4.5 5 1 15 2.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 52.8 V 48 V 43.2 V.2.4.6.8 1. 1.2 1.4 5 1 15 2 25 3 35 4 45 19R648G41 With pulse sensor 19R648H41 With pulse sensor.45.4.35.3.25.2.15.1.5 12 11 1 9 8 7 6 5 4 3 2 1 53 V 48 V 43 V.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 35.2.15.1.5 6 53 V 5 48 V 4 3 4 V 2 1.1.2.3.4.5.6.7 5 1 15 2 25 Dimensions (unit: mm) (With ribs) +1 6 5±.3 +1 6 5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +5 3 25±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 78
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 62.7 4-ø4.5 Fan 6 mm sq. 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 79
Fan 6 6 25 mm San Cooler 6 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 8 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A612G41 6 to 13.2.24 2.88 56.78 27.6 87.3.351 39-2 to +6 3/6 C 9A612S41.17 2.4 46.65 23. 56.8.228 33 9A612H41 12 6 to 13.8.11 1.32 38.53 18.7 4.2.161 28 9A612F41.9 1.8 32.44 15.5 29.4.118 24-2 to +7 4/6 C 9A612M41 7 to 13.8.6.72 26.36 12.7 19.6.79 2 9A624G41 12 to 27.6.13 3.12 56.78 27.6 87.3.351 39-2 to +6 3/6 C 9A624S41.8 1.92 46.65 23. 56.8.228 33 9A624H41 24 12 to 27.6.6 1.44 38.53 18.7 4.2.161 28 9A624F41.5 1.2 32.44 15.5 29.4.118 24-2 to +7 4/6 C 9A624M41 14 to 27.6.4.96 26.36 12.7 19.6.79 2 Other sensor specifications are available as options. Refer to the index (p. 546). Airflow - Static Pressure Characteristics 9A612G41 With pulse sensor 9A612S41 With pulse sensor 9A612H41 With pulse sensor.45.4.35.3.25.2.15.1.5 11 1 9 8 7 6 5 4 3 2 1 6 V 13.2 V.1.2.3.4.5.6.7.8.9.3.25.2.15.1.5 8 7 6 5 4 3 2 1 6 V.2.4.6.8 1. 5 1 15 2 25 3 5 1 15 2 25 3 35 5 1 15 2 25.25.2.15.1.5 6 5 4 3 2 1 6 V.1.2.3.4.5.6.7 8
Airflow - Static Pressure Characteristics 9A612F41 With pulse sensor 9A612M41 With pulse sensor 9A624G41 With pulse sensor.16.14.12.1.8.6.4.2 4 3 2 1 6 V.1.2.3.4.5.6 5 1 15 2.12.1.8.6.4.2 3 25 2 15 1 5 7 V.1.2.3.4.5 5 1 15 2.45.4.35.3.25.2.15.1.5 12 11 1 9 8 7 6 5 4 3 2 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 Fan 6 mm sq. 9A624S41 With pulse sensor 9A624H41 With pulse sensor 9A624F41 With pulse sensor.3.25.2.15.1.5 8 7 6 5 4 3 2 1.2.4.6.8 1. 5 1 15 2 25 3 35.25.2.15.1.5 6 5 4 3 2 1.1.2.3.4.5.6.7 5 1 15 2 25.16.14.12.1.8.6.4.2 4 3 2 1.1.2.3.4.5.6 5 1 15 2 9A624M41 With pulse sensor.12 3.1.8.6.4.2 25 2 15 1 5 14 V.1.2.3.4.5 5 1 15 2 81
Dimensions (unit: mm) (With ribs) +1 6 5±.3 +1 6 5±.3 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 17 +5 3 25±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 4-ø4.5 62.7 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 82
Fan 6 6 38 mm San Ace 6 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 135 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 2.7 32.4 217 1.88 66.4 175 7. 68 4/6 C 9HV612P1J1 12 1.8 to 12.6-2 to +7 2.17 2.4 53.43 15.2 12.41 34 (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV612P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 6 5 4 3 2 1 V 18 16 14 PWM デューティ 1% 12 1 8 6 4 2 2%.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 18 7 16 6 14 5 12 4 1 3 8 6 2 4 1 2 PWM PWMduty デューティ cycle 1% /12.6 V 1.8 V.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 22 2 18 16 14 12 1 8 6 4 2 1 (%) 217 min -1 Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 6±.5 5±.3 (1) リード線 Lead wire AWG24 UL 143 5±.3 6±.5 4±.3 4±.3 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 83
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 4-ø4.5 62.7 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 84
Fan 6 6 38 mm San Ace 6 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Fan 6 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 1.5 18. 175 1.75 62 82 3.3 63 9GA612P1J3** 1.8 to 12.6-2 to +6 2.1 1.2 4.4 14 43.17 24 1.95 11.4 148 1.5 53 6 2.4 59 9GA612P1K3** 2.1 1.2 4.4 14 43.17 24 12-2 to +7 1.55 6.6 115 1.15 4 375 1.5 52 9GA612P1H3** 1.8 to 13.2 2.6.72 26.27 9.5 2.8 19 4/6 C 1.95 11.4 148 1.5 53 675 2.7 59 (7/4 C) 9GA612P1K6-2 to +6.5.6 148.134 4.7 8.3.3 16 1.75 18. 175 1.75 62 82 3.3 63 9GA624P1J3** 21.6 to 25.2-2 to +6 2.1 2.4 62.63 22 14.42 35 24 1.5 12 148 1.5 53. 6 2.4 59 9GA624P1K3** 21.6 to 26.4-2 to +7 2.6 1.44 5.5 17.7 7.28 28 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (pp. 551 to 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P1J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3.5 9 3. 8 PWM デューティ 7 1% 2.5 6 2. 1.5 1..5 5 4 3 2 1 2%.4 6%.8 1.2 V 1.6 2. 1 2 3 4 5 6 7 3.5 9 8 3. 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1.4 PWM PWM duty デューティ cycle 1% 1%.8 12.6 V 1.8 V 1.2 1.6 2. 1 2 3 4 5 6 7 回転速度 Fan speed (min -1 ) 18 16 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 175 min -1 1 (%) 85
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA612P1K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 6% 2% 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 1% 13.2 V 1.8 V 回転速度 Fan speed (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 148 min -1.4.8 1.2 1.6 1 2 3 4 5.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 1 (%) 9GA612P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 12 V 2. 5 PWM PWM duty デューティ cycle 1% 1% (min -1 ) 14 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1.5 1..5 4 3 2 1 PWM デューティ 1% 6% 2%.4.8 1.2 1.6 1 2 3 4 5 1.5 1..5 4 3 2 1 13.2 V 1.8 V.4.8 1.2 1 2 3 4 5 1.6 12 115 min -1 1 8 6 4 2 1 (%) 9GA612P1K6 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 V 2.5 PWM デューティ 6 1% 2. 5 1.5 4 3 1. 2.5 1 5% %.4.8 1.2 1.6 1 2 3 4 5 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 1 PWM 1% PWMデューティ1%.4 13.2 V, 1.8 V.8 1.2 2 3 4 5 1.6 回転速度 Fan speed Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 148 min -1 14 12 1 8 6 4 2 148 min -1 1 (%) 9GA624P1J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 86 3.5 3. 2.5 2. 1.5 1..5 9 8 7 6 5 4 3 2 1 1 PWM デューティ 1% 2% 6%.4.8 1.2 1.6 V 2. 2 3 4 5 6 7 3.5 9 8 3. 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 1% 25.2 V 21.6 V.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 18 175 min -1 16 14 12 1 8 6 4 2 1 (%)
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA624P1K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.5 2. 1.5 1..5 7 V 6 PWM デューティ 1% 5 4 3 2 6% 1 2%.4.8 1.2 1.6 1 2 3 4 5 7 2.5 6 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side 59 5±.3 29.7 4-ø4.5 62.7 29.7 5±.3 59 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 148 min -1 1 (%) Fan 6 mm sq. Dimensions (unit: mm) (With ribs) 6±.5 5±.3 (1) 5±.3 6±.5 (4) 38±.5 (4) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 87
Fan 6 6 38 mm San Ace 6 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV612P1G3 1 2.8 33.6 16 2.37 84 751 3.2 66.12 1.5 31.44 15 26.1 25 9GV612P1H3 1 2. 24. 145 2.15 76 617 2.48 63 8. to 13.8 12.1 1.2 27.4 14 21.9 22 1 1.5 18. 13 1.93 68 496 1.99 6 9GV612P1M3.8 1. 25.38 13 18.7 19-2 to +7 4/6 C 9GV612P1L1** 1.8 to 13.8 1.7 8.4 1 1.49 52.6 293 1.17 52 9GV624P1G3 1 1.4 33.6 16 2.37 84 751 3.2 66 24 2.4 to 27.6.12 2.88 6.89 31 15.42 38 9GV624P1M3** 1.73 17.52 13 1.93 68. 496 1.99 6 9GV648P1H3 48 38 to 57 1.5 24 145 2.15 76 617 2.48 63.8 3.84 6.89 31 15.42 38 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 554). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV612P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3.6 9 3.2 8 2.8 7 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 % V PWM デューティ 1% 5%.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 3.6 9 3.2 8 2.8 7 2.4 2. 6 5 1.6 1.2 4 3 PWM PWMduty デューティ cycle 1% 8 V.8 2.4 1.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 min -1 31 min -1 18 16 14 12 1 8 6 4 2 1 (%) 88
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV612P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3.6 3.2 2.8 2.4 2. 1.6 1.2.8 2.4 9 8 7 6 5 4 3 1 5% % V PWM デューティ 1%.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 PWM PWMduty デューティ cycle 1% 3.6 9 3.2 8 2.8 7 2.4 6 2. 5 1.6 4 1.2 3.8 2 8 V.4 1.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 :12 V PWM PWM 周波数 frequency: :25 khz 25 khz 27 min -1 1 (%) 145 min -1 Fan 6 mm sq. 9GV612P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3.6 9 3.2 8 2.8 7 2.4 2. 6 5 1.6 1.2 4 3 V PWM デューティ 1%.8 2 5%.4 1 %.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 3.6 9 3.2 8 2.8 7 2.4 2. 6 5 1.6 1.2 4 3 PWM PWM duty デューティ cycle 1% 1%.8 2 8 V.4 1.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 14 13 min -1 12 1 8 6 4 25 min 2-1 1 (%) 9GV612P1L1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.6 4 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5.4 V PWM デューティ 1% 5%.8 1.2 1.6 2. 1 2 3 4 5 6 7 1.6 1.4 1.2 1..8.6.4.2 4 PWM PWMduty デューティ cycle 1% 35 3 25 2 15 1.8 V 1 5.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 11 1 1 min -1 9 8 7 6 5 4 3 2 1 1 (%) 9GV624P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3.2 2.8 2.4 2. 1.6 1.2.8.4 8 7 6 5 4 3 2 1 V PWM デューティ 1% 5% %.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 4. 1 3.6 9 3.2 8 2.8 7 2.4 6 2. 5 1.6 4 1.2.8.4 3 2 1 PWM PWMduty デューティ cycle 1% 2.4 V.4.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 91 Voltage: 電圧 : V (min -1 ) PWM PWM 周波数 frequency: :25 khz 25 khz 16 16 min -1 14 12 1 8 6 6 min -1 4 2 1 (%) 89
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV624P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 24 V PWM デューティ 1% 5% 2.4 2. 1.6 1.2.8.4 6 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 13 min -1.4.8 1.2 1.6 2. 2.4 1 2 3 4 5 6 7 8.4.8 1.2 1.6 2. 2.4 1 2 3 4 5 6 7 8 1 (%) 9GV648P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.8 2.4 2. 1.6 1.2.8.4 48 VV 7 PWM デューティ 6 1% 5 5% 4 % 3 2 1.4.8 1.2 1.6 2. 2.4 1 2 3 4 5 6 7 8 9 3.2 2.8 2.4 2. 1.6 1.2.8.4 8 7 6 5 4 3 2 1.4 PWM PWMduty デューティ cycle 1% 57 V 48 V 38 V.8 1.2 1.6 2. 2.4 2.8 1 2 3 4 5 6 7 8 9 1 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 145 min -1 14 12 1 8 6 6 min -1 4 2 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 6±.5 5±.3 (1) リード線 Lead wire AWG26 UL 17 UL 143( (Model 型番 :9GV612P1G3 no.: only) のみ ) 5±.3 6±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 9
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 62.7 4-ø4.5 Fan 6 mm sq. 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 91
Fan 6 6 38 mm San Ace 6 9G type (Ribless model depicted) General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 11 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G612G11 1.54 18.5 118 1.84 65 435 1.747 58 12 7. to 13.8 9G612S11 1.36 16.3 18 1.7 6 37 1.486 56 9G624G11.85 2.4 118 1.84 65 435 1.747 58 9G624S11 24 14. to 27.6.7 16.8 18 1.7 6 37 1.486 56-2 to +7 4/6 C 9G624H11.57 13.68 98 1.54 54.4 34.6 1.223 54 9G648G11.35 16.8 118 1.84 65 435 1.747 58 48 28 to 55.2 9G648S11.29 13.9 18 1.7 6 37 1.486 56 Other sensor specifications are available as options. Refer to the index (pp. 548 to 549). Airflow - Static Pressure Characteristics 9G612G11 With pulse sensor 9G612S11 With pulse sensor 9G624G11 With pulse sensor 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 55 5 45 4 35 3 25 2 15 1 5.4.8 7 V 1.2 1.6 2. 2.4 2 4 6 8 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 7 V 25 2 15 1 5.4.8 1.2 1.6 2. 2 4 6 8 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 55 5 45 4 35 3 25 2 15 1 5.4.8 14 V 1.2 1.6 2. 2.4 2 4 6 8 92
Airflow - Static Pressure Characteristics 9G624S11 With pulse sensor 9G624H11 With pulse sensor 9G648G11 With pulse sensor 1.8 1.6 1.4 1.2 1..8.6.4.2 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 14 V 2 15 1 5.4.8 1.2 1.6 2. 2 4 6 8 9G648S11 With pulse sensor 45 4 35 3 25 2 15 1 5 55.2 V.4 48 V 28 V.8 1.2 1.6 2. 2 4 6 8 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 14 V.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 55 5 45 4 35 3 25 2 15 1 5.4 55.2 V.8 48 V 28 V 1.2 1.6 2. 2.4 2 4 6 8 Fan 6 mm sq. Dimensions (unit: mm) (With ribs) +1 6 5±.3 +1 6 5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +5 3 38±.5 (4) (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 93
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 59 5±.3 29.7 4-ø4.5 62.7 29.7 5±.3 59 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-139E, 19-139H Model no.: 19-13G Resin filter kits page: p. 521 Model no.: 19-13F13 (13PPI), 19-13F2 (2PPI), 19-13F3 (3PPI), 19-13F4 (4PPI) 94
Fan 7 7 38 mm San Ace 7 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 17 g Fan 7 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA712P1G1 9GA712P1H1 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 12 1.8 to 13.2 1 2.6 31.2 165 2.65 93.6 86 3.45 65.16 1.92 44.7 24.7 61.24 3 1 1.1 13.2 12 1.92 67.8 455 1.83 57.7.84 25.4 14.1 2.8 19-2 to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA712P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4. 3.5 3. 2.5 2. 1.5 1..5 1 8 6 4 2 1 2 3 2 V PWM デューティ 1% 5% % 4 6 8 1 4. 3.5 3. 2.5 2. 1.5 1..5 1 8 6 4 2 1 2 3 2 PWM duty デューティ cycle 1% 13.2 V 1.8 V 4 6 8 1 (min -1 ) 18 16 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 165 min -1 1 (%) 9GA712P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 6 V 6 PWM PWMduty デューティ cycle 1% (min -1 ) 14 Voltage: 電圧 :12 V PWM 周波数 frequency: :25 khz 25 khz 2. 1.5 1..5 5 4 3 2 1 % PWM デューティ 1% 5% 2. 1.5 1..5 5 4 3 2 1 13.2 V 1.8 V 12 1 8 6 4 2 12 min -1.5 1. 1.5 2. 2.5 2 4 6 8.5 1. 1.5 2. 2.5 2 4 6 8 1 (%) 95
Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 7±.5 61.5±.3 +5 3 (1) 61.5±.3 7±.5 Lead リード線 wire AWG24 UL 143 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 61.5 Outlet side 61.5 4-ø4.5 4-ø4.5 ø74 ø78 69 61.5 69 61.5 69 69 Options Finger guards page: p. 513 Model no.: 19-1128 96
Fan 8 8 15 mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Model 9GA812H71 is not certified. Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 65 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P7G1 1.29 3.48 61 1.44 5.9 84..34 41 12 1.2 to 13.8 9GA812P7S1 1.17 2.4 5 1.18 41.7 56.4.23 37 4/6 C -2 to +7 9GA824P7G1 1.13 3.12 61 1.44 5.9 84..34 41 (7/4 C) 24 2.4 to 27.6 9GA824P7S1 1.8 1.92 5 1.18 41.7 56.4.23 37 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812H71 12 6 to 13.2.9 1.8 38.89 31.4 32.6.13 29 9GA824H71 24 12 to 26.4.5 1.2 38.89 31.4 32.6.13 29 Other sensor specifications are available as options. Refer to the index (p. 552). -2 to +7 4/6 C (7/4 C) Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P7G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.5 12.4 1.3.2.1 8 6 4 2 V PWM デューティ 1% 5%.5 12.4 1 8.3 6.2 4.1 2 PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM frequency: 25 khz 6 5 4 3 2 1 PWM 周波数 :25 khz 61 min -1.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 6.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 6 1 (%) 97
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P7S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.3.2.1.5 12.4 1.3.2.1 8 6 4 2 8 6 4 2 PWM デューティ 1% 5%.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 PWM デューティ 1% 5% V V 9GA824P7G1 With pulse sensor with PWM control function PWM.3.2.1.5.4.3.2.1 8 6 4 2 12 1 8 6 4 2 PWM duty デューティ cycle 1% 1.2 V.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 5 4 3 2 1 61 min -1.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 6.2.4.6.8 1. 1.2 1.4 1.6 1 2 3 4 5 6 1 (%) 9GA824P7S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.3.2.1 8 6 4 2 V PWM デューティ 1% 5%.3.2.1 8 6 4 2 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 5 min -1.2.4.6.8 1. 1.2 1.4 1 2 3 4 5.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 1 (%) 9GA812H71 With pulse sensor 9GA824H71 With pulse sensor.2 5.2 5.15.1.5 4 3 2 1 6 V 13.2 V.15.1.5 4 3 2 1 26.4 V 98.2.4.6.8 1. 1 2 3.2.4.6.8 1. 1 2 3
Dimensions (unit: mm) (With pulse sensor with PWM control function) 8±.5 71.5±.3 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 Fan 8 mm sq. 71.5±.3 8±.5 Rotating direction 回転方向 (1) 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 Lead リード線 wire AWG28 UL 17 (4) (4) 15±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 99
Fan 8 8 15 mm San Ace 8 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 68 g Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P812H71.2 2.4 31.91 32.1 29.4.118 31 4/6 C 12 7 to 13.8 19P812M71.9 1.8 2.57 2.1 12.6.51 21 6/6 C -2 to +7 19P824H71.1 2.4 31.91 32.1 29.4.118 31 4/6 C 24 14 to 27.6 19P824M71.5 1.2 2.57 2.1 12.6.51 21 6/6 C Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P812H71 With pulse sensor 19P812M71 With pulse sensor 19P824H71 With pulse sensor.16 4.14.12 3.1.8 2.6.4 1 7 V.2.2.4.6.8 1. 1.2 1 2 3 4.7 16.6.5 12.4.3 8.2 4.1.2 13.2 V 7 V.4.6.8 5 1 15 2 25 3.16 4.14.12 3.1.8 2.6.4 1 14 V.2.2.4.6.8 1. 1.2 1 2 3 4 19P824M71 With pulse sensor 1.7 16.6.5 12.4.3 8.2 4.1.2 14 V.4.6.8 5 1 15 2 25 3
Dimensions (unit: mm) 8±.5 71.5±.3 8±.5 71.5±.3 4-ø4.3±.3 (3.5) Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +3 3 +1 15 (3.5) Fan 8 mm sq. (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 71.5±.3 4-ø4.5 71.5±.3 4-ø4.5 ø84 ø89.5 78 71.5±.3 78 71.5±.3 Inlet side Outlet side 78 78 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 11
Fan 8 8 2 mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 8 g Specifications The models listed below have ribs and pulse sensors with PWM control function. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P6G1 4/6 C.3 3.6 585 1.72 6.78 11.44 45 12 1.2 to 13.8 1 (7/4 C) 9GA812P6M1.6.72 29.84 29.68 27.11 26.5 6/6 C -2 to +7 4/6 C 9GA824P6G1.15 3.6 585 1.72 6.78 11.44 45 24 2.4 to 27.6 1 (7/4 C) 9GA824P6M1.3.72 29.84 29.68 27.11 26.5 6/6 C * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P6G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 14.5 12.4 1 8.3 6.2 4.1 2 V PWM デューティ 1% 5%.5.4.3.2.1 14 12 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 75 5 25 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 585 min -1.4.8 1.2 1.6 1 2 3 4 5 6 2. 7.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 1 (%) 12
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P6M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.16 4.14.12 3 PWM デューティ.1 1%.8 2.6.4 1 5%.2.2.4.6.8 1. 14.5 12.4 1 8.3 6.2 4.1 2 5 1 15 2 25 3 35 PWM デューティ 1% 5%.4.8 1.2 1.6 V V 2. 1 2 3 4 5 6 7 9GA824P6G1 With pulse sensor with PWM control function PWM.16 4.14.12 3.1.8 2 PWM PWMduty デューティ cycle 1% 1.2 V.6.4 1.2.2.4.6.8.5.4.3.2.1 1. 5 1 15 2 25 3 35 14 PWM PWMduty デューティ cycle 1% 12 1 8 2.4 V 6 4 2.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 (min -1 ) 3 2 1 1 (min -1 ) 75 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 29 min -1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 585 min -1 5 25 1 (%) Fan 8 mm sq. 9GA824P6M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.16 4.14.12 3.1.8 2.6.4 1.2 V PWM デューティ 1% 5%.16 4.14.12 3.1.8 2.6.4 1.2 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 29 min -1.2.4.6.8 1. 5 1 15 2 25 3 35.2.4.6.8 1. 5 1 15 2 25 3 35 1 (%) 13
Dimensions (unit: mm) 4-ø4.5±.3 Mounting 取付用穴 hole (4) 2±.5 (4) 8±.5 71.5±.3 +5 3 (1) 71.5±.3 8±.5 Lead リード線 wire AWG26 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 14
Fan 8 8 2 mm San Ace 8 9P type Model 19P812C61 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 1 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P812C61.29 3.48 37 1.7 37.8 46.185 39-2 to +6 19P812H61 12 1.2 to 13.8.21 2.52 29.84 29.7 29.4.118 31 19P812M61.13 1.56 23.67 23.7 18.6.75 25 6/6 C -2 to +7 19P824H61.12 2.88 29.84 29.7 29.4.118 31 24 2.4 to 27.6 19P824M61.7 1.68 23.67 23.7 18.6.75 25 19P848C61.8 3.84 37 1.7 37.8 46.185 39-2 to +7 48 38 to 57.6 4/6 C 19P848H61.5 2.4 29.84 29.7 29.4.118 31-2 to +6 Other sensor specifications are available as options. Refer to the index (p. 544). Airflow - Static Pressure Characteristics 19P812C61 With pulse sensor 19P812H61 With pulse sensor 19P812M61 With pulse sensor 7.25 6.2 5 4.15 3.1 2.5 1 1.2 V.16.14.12.1.8.6.4.2 4 3 2 1 1.2 V.12 3.1.8 2.6.4 1.2 1.2 V.5 1. 1.5 1 2 3 4 5.5 1. 1 2 3 4.5 1. 1 2 3 4 15
Airflow - Static Pressure Characteristics 19P824H61 With pulse sensor 19P824M61 With pulse sensor 19P848C61 With pulse sensor.16.14.12.1.8.6.4.2 4 3 2 1.5 2.4 V 1..12.1.8.6.4.2 3 2 1.5 1 2 3 4 1 2 3 4 1 2 3 4 5 6 2.4 V 1..3.25.2.15.1.5 7 6 5 4 3 2 1.5 57.6 V 48 V 38 V 1. 1.5 19P848H61 With pulse sensor.18.16 4.14 57.6 V.12 3.1 48 V.8 2.6 38 V.4 1.2.5 1. 1.5 1 2 3 4 5 Dimensions (unit: mm) 8±.5 71.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole 2-1 (3.5) (3.5) (1) 8±.5 71.5±.3 +3 3 リード線 Lead wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction 16
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 71.5±.3 4-ø4.5 71.5±.3 4-ø4.5 ø88 78 71.5±.3 78 71.5±.3 ø89.5 Fan 8 mm sq. 78 78 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 17
Fan 8 8 25 mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 11 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P4J1 1.6 7.2 74 2.7 73. 177.6.7 48 25.8.96 25.69 24.3 2.2.8 21 9GA812P4G1 12 1.8 to 13.2 1.48 5.76 68 1.91 67.4 15.6 45 25.6.72 15.42 14.8 7.2.2 17 1.22 2.64 52 1.46 51.5 87.7.35 37 9GA812P4H1 25.6.72 16.44 15.5 8.3.3 17 4/6 C -2 to +7 1.28 6.72 74 2.7 73. 177.6.7 48 (7/4 C) 9GA824P4J1 25.6 1.44 28.78 27.5 25.4.1 23 9GA824P4G1 24 21.6 to 26.4 1.21 5.4 68 1.91 67.4 15.6 45 25.4.96 21.58 2.4 14.3.5 19 9GA824P4H1 1.1 2.4 52 1.46 51.5 87.7.35 37 25.2.48 15.42 14.8 7.2.2 17 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P4J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2.7 18.6 16 14.5 12.4 1.3 8.2 6 4.1 2 25%.5 1. 1.5 2. V PWM デューティ 1% 6% 2 4 6 8 2.5 PWM PWMduty デューティ cycle 1%.8 2.7 18 16.6 13.2 V 14.5 12.4 1 1.8 V.3 8 6.2 4.1 2.5 1. 1.5 2. 2.5 2 4 6 8 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 8 74 min -1 7 6 5 4 3 2 1 1 (%) 18
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.7 18 V 16.6 14 PWM デューティ.5 1% 12.4 1.3.2 8 6 6% 4.1 2 25%.5 1. 1.5 2. 2.5 2 4 6 8.7 18.6 16 14.5 12.4 1.3.2.1 8 6 4 2.5 PWM PWMduty デューティ cycle 1% 13.2 V 1. 1.8 V 1.5 2. 2 4 6 8 2.5 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 6 5 4 3 2 1 1 (%) 68 min -1 Fan 8 mm sq. 9GA812P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1.35 9.3 8 7.25 6.2 5.15 4.1 3 2.5 1 6% 25%.5 1. 1.5 V PWM デューティ 1% 2. 1 2 3 4 5 6 7.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V.5 1. 1.5 2. 1 2 3 4 5 6 7 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 6 52 min -1 5 4 3 2 1 1 (%) 9GA824P4J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2 V.7 18 16 PWM デューティ.6 1% 14.5 12.4.3 1 8 6%.2 6 4.1 2 25%.5 1. 1.5 2. 2.5 2 4 6 8.7 18 V 16.6 PWM デューティ 14 1%.5 12.4 1.3 8.2 6 6% 4.1 2 25%.5 1. 1.5 2. 2.5 2 4 6 8 9GA824P4G1 With pulse sensor with PWM control function PWM (m 3 /min PWM PWMduty デューティ cycle 1% 1%.8.7.6.5 2 18 16 14 12 26.4 V.4.3.2 1 8 6 4 21.6 V.1 2.5 1. 1.5 2. 2.5 2 4 6 8 PWM PWM duty デューティ cycle 1% 1%.7 18 16.6 14.5 26.4 V 12.4 1.3 8.2 6 21.6 V 4.1 2.5 1. 1.5 2. 2.5 2 4 6 8 (min -1 ) 8 7 6 5 4 3 2 1 1 (%) Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 6 5 4 3 2 1 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 74 min -1 PWM duty - Speed characteristics example 68 min -1 1 (%) 19
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA824P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 V PWM デューティ 1% 6% 25%.5 1. 1.5 2. 1 2 3 4 5 6 7.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM PWM duty デューティ cycle 1% 1% 26.4 V 21.6 V.5 1. 1.5 2. 1 2 3 4 5 6 7 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 6 52 min -1 5 4 3 2 1 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 Lead リード線 wire AWG26 UL 17 71.5±.3 4-ø4.5 ø9 78.5 71.5±.3 8±.5 71.5±.3 (1) 71.5±.3 8±.5 (4) 25.2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 11
Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) Fan 8 mm sq. 111
Fan 8 8 25 mm San Ace 8 9S type Silent Fan Model 9S812H41 is not TÜV certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 75 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. 9S812H41 9S812F41 Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 5. to 13.2.23 2.76 34 1.12 39.5 52.15.2 31.11 1.32 28.93 32.8 35.5.143 24 12 5. to 13.8 9S812M41.8.96 25.83 29.3 27.5.11 22 9S812L41 6. to 13.8.5.6 2.66 23.3 18.1.73 16 9S824M41.6 1.44 25.83 29.3 27.5.11 22 24 1 to 26.4 9S824L41.4.96 2.66 23.3 18.1.73 16 Other sensor specifications are available as options. Refer to the index (p. 557). -1 to +7 4/6 C Airflow - Static Pressure Characteristics 9S812H41 With pulse sensor 9S812F41 With pulse sensor 9S812M41 With pulse sensor 7.25 6.2 5 4.15 3.1 2.5 1 5 V 13.2 V.2 5 4.15 3.1 2.5 1 5 V.2 5.15 4 3.1 2.5 1 5 V.2.4.6.8 1. 1.2 1.4 1 2 3 4 5.2.4.6.8 1. 1.2 5 1 15 2 25 3 35 4.2.4.6.8 1. 5 1 15 2 25 3 35 112
Airflow - Static Pressure Characteristics 9S812L41 With pulse sensor 9S824M41 With pulse sensor 9S824L41 With pulse sensor.2 5 4.15 3.1 2.5 1 6 V.2 5.15 4 3.1 2.5 1 26.4 V 1 V.2 5 4.15 3.1 2.5 1 26.4 V 1 V 4-ø4.3±.3 Mounting 取付用穴 hole 25±.5 (4) (4) 8±.5 71.5±.3 リード線 Lead wire AWG24 UL 17 +5 3 (1) 71.5±.3 8±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction 4-ø4.5 71.5±.3 ø9 78.5 71.5±.3 Fan 8 mm sq..2.4.6.8 1. 5 1 15 2 25 3 35.2.4.6.8 1. 5 1 15 2 25 3 35.2.4.6.8 1. 5 1 15 2 25 3 35 Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 113
Fan 8 8 25 mm San Ace 8 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 125 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.87 1.4 56 2.12 74.8 173..69 52 9GV812P4K3.1 1.2 14.5 18.7 1.3.4 18 12 1.2 to 13.8 1.47 5.6 45 1.72 6.7 11..44 46 9GV812P4J3.7.8 12.45 16.2 7.5.3 14-2 to +7 4/6 C 1.44 1.56 56 2.12 74.8 173..69 52 9GV824P4K1 24 2.4 to 27.6.6 1.44 14.53 18.7 1.8.4 18 1.22 1.56 56 2.12 74.8 173..69 52 9GV848P4K3 48 43 to 53.4 1.92 15.57 2.1 12.4.5 19 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P4K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2.6 15.4 1.2 5 V PWM デューティ 1% 5% % 1. 25.8 2.6 15.4 1.2 5 PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 5 4 3 2 14 min -1 1 56 min -1.5 1. 1.5 2. 2.5 2 4 6 8.5 1. 1.5 2. 2.5 2 4 6 8 1 (%) 114
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P4J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12.4 1 8.3 6.2 4.1 2 V PWM デューティ 1% 5% % 14.5 12.4 1 8.3 6.2 4.1 2 PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 5 45 min -1 4 3 2 12 min -1 1 Fan 8 mm sq..5 1. 1.5 2. 2 4 6.5 1. 1.5 2. 2 4 6 1 (%) 9GV824P4K1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8.6.4.2 2 15 1 5 V PWM デューティ 1% % 5%.8 2.6 15.4 1.2 5 PWM PWMduty デューティ cycle 1% 2.4 V Voltage: 電圧 : V (min -1 ) PWM frequency: 周波数 :25 khz 25 khz 6 5 4 3 2 1 14 min -1 56 min -1.5 1. 1.5 2. 2.5 2 4 6 8.5 1. 1.5 2. 2.5 2 4 6 8 1 (%) 9GV848P4K3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2.6 15.4 1.2 5 48 V V PWM デューティ 1% 5% %.8 2.6 15.4 1.2 5 PWM PWMduty デューティ cycle 1% 53 V 48 V 43 V Voltage: 電圧 :48 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 5 4 3 2 15 min -1 1 56 min -1.5 1. 1.5 2. 2.5 2 4 6 8.5 1. 1.5 2. 2 4 6 8 2.5 1 (%) 115
Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG26 UL 17 8±.5 71.5±.3 +3 3 (1) 71.5±.3 8±.5 (4) (4) 25.2±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø4.5 ø9 78.5 71.5±.3 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 116
Fan 8 8 25 mm San Ace 8 9R type Model 19R812E41 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 11 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19R85F41.25 1.25 26.92 32.5 28.4.114 26 5 4.5 to 5.5 19R85M41.17.85 235.83 29.3 22.5.9 23-2 to +7 6/6 C 19R812G41 1.8 to 13.2.37 4.44 45 1.5 53. 8.4.323 4 19R812E41.24 2.88 37 1.31 46.3 57.8.232 35-2 to +6 4/6 C 19R812S41.18 2.16 34 1.2 42.4 48..193 34 19R812H41 12 6 to 13.8.13 1.56 29 1.3 36.4 35.3.142 29 19R812F41.11 1.32 26.92 32.5 28.4.114 26-2 to +7 6/6 C 19R812M41.9 1.8 235.83 29.3 22.5.9 23 19R812L41 7 to 13.8.6.72 185.65 23. 14.7.59 2 19R824G41 2.4 to 26.4.2 4.8 45 1.5 53. 8.4.323 4-2 to +6 4/6 C 19R824S41.1 2.4 34 1.2 42.4 48..193 34 19R824H41.7 1.68 29 1.3 36.4 35.3.142 29 24 12 to 27.6 19R824F41.6 1.44 26.92 32.5 28.4.114 26-2 to +7 6/6 C 19R824M41.5 1.2 235.83 29.3 22.5.9 23 19R824L41 14 to 27.6.4.96 185.65 23. 14.7.59 2 19R848K41.1 4.8 46 1.56 55.1 88.4.355 41-2 to +6 4/6 C 48 4.8 to 55.2 19R848S41.6 2.88 34 1.2 42.4 48..193 34-2 to +7 6/6 C Other sensor specifications are available as options. Refer to the index (pp. 545 to 546). Airflow - Static Pressure Characteristics 19R85F41 With pulse sensor 19R85M41 With pulse sensor 19R812G41 With pulse sensor.2.175.15.125.1.75.5.25 5 4 3 2 1 5.5 V 5 V 4.5 V.5 1. 1.5 1 2 3 4 5.16.14.12.1.8.6.4.2 4 3 2 1 5.5 V 5 V 4.5 V.4.8 1.2 1 2 3 4.4.35.3.25.2.15.1.5 1 9 13.2 V 8 7 1.8 V 6 5 4 3 2 1.2.4.6.8 1. 1.2 1.4 1.6 1.8 1 2 3 4 5 6 7 117
Airflow - Static Pressure Characteristics 19R812E41 With pulse sensor 19R812S41 With pulse sensor 19R812H41 With pulse sensor.4 1.35.3 8.25 6.2.15 4.1.5 2 6 V.5 1. 1.5 2. 1 2 3 4 5 6 7.3 7.25 6.2.15.1 5 4 3 2 6 V.5 1.5 1. 1.5 1 2 3 4 5.2.175.15.125.1.75.5.25 5 4 3 2 1 6 V.5 1. 1.5 1 2 3 4 5 19R812F41 With pulse sensor 19R812M41 With pulse sensor 19R812L41 With pulse sensor.2.175.15.125.1.75.5.25.4.35.3.25.2.15.1.5 5 4 3 2 1 6 V.5 1. 1.5 1 2 3 4 5 1 9 26.4 V 8 7 2.4 V 6 5 4 3 2 1.2.4.6.8 1. 1.2 1.4 1.6 1.8 1 2 3 4 5 6 7.16.14.12.1.8.6.4.2.3.25.2.15.1.5 4 3 2 1 7 6 5 4 3 2 1.4.8 1.2 1 2 3 4.5 1. 6 V 1.5 1 2 3 4 5.1.9.8.7.6.5.4.3.2.1.2.175.15.125.1.75.5.25 25 2 15 1 5 5 4 3 2 1.2.4.6 5 1 15 2 25 3 19R824G41 With pulse sensor 19R824S41 With pulse sensor 19R824H41 With pulse sensor 7 V.8.5 1. 1.5 1 2 3 4 5 19R824F41 With pulse sensor 19R824M41 With pulse sensor 19R824L41 With pulse sensor 118.2.175.15.125.1.75.5.25 5 4 3 2 1.5 1. 1.5 1 2 3 4 5.16.14.12.1.8.6.4.2 4 3 2 1.4.8 1.2 1 2 3 4.1.9.8.7.6.5.4.3.2.1 25 2 15 1 5.2.4 14 V.6.8 5 1 15 2 25 3
Airflow - Static Pressure Characteristics 19R848K41 With pulse sensor 19R848S41 With pulse sensor.45.4.35.3.25.2.15.1.5 11 1 9 8 7 6 5 4 3 2 1.5 55.2 V 48 V 4.8 V 1. 1.5 2. 1 2 3 4 5 6 7.3 8±.5 71.5±.3 8±.5 71.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +3 3 25±.5 (3) (3) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3.25.2.15.1.5 7 6 5 4 3 2 1 55.2 V.5 48 V 4.8 V 1. 1.5 1 2 3 4 5 Fan 8 mm sq. Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 119
Fan 8 8 25 mm San Cooler 8 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 9 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A812G41 6 to 13.2.38 4.56 45 1.5 53. 8.3.323 4-2 to +6 3/6 C 9A812S41.18 2.16 34 1.2 42.4 48.193 34 9A812H41.13 1.56 29 1.3 36.4 35.3.142 29 12 6 to 13.8 9A812F41.11 1.32 26.92 32.5 28.4.114 26-2 to +7 4/6 C 9A812M41.9 1.8 235.83 29.3 22.5.9 23 9A812L41 7 to 13.8.6.72 185.65 23. 14.7.59 2 9A824G41 12 to 26.4.21 5.4 45 1.5 53. 8.3.323 4-2 to +6 3/6 C 9A824S41.1 2.4 34 1.2 42.4 48.193 34 9A824H41.7 1.68 29 1.3 36.4 35.3.142 29 24 12 to 27.6 9A824F41.6 1.44 26.92 32.5 28.4.114 26-2 to +7 4/6 C 9A824M41.5 1.2 235.83 29.3 22.5.9 23 9A824L41 14 to 27.6.4.96 185.65 23. 14.7.59 2 Other sensor specifications are available as options. Refer to the index (pp. 546 to 547). Airflow - Static Pressure Characteristics 9A812G41 With pulse sensor 9A812S41 With pulse sensor 9A812H41 With pulse sensor.4.35.3.25.2.15.1.5 1 9 8 7 6 5 4 3 2 1 6 V 13.2 V.2.4.6.8 1. 1.2 1.4 1.6 1.8.3.25.2.15.1.5 7 6 5 4 3 2 1.5 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5 6 V 1. 1.5.2.15.1.5 5 4 3 2 1.5 6 V 1. 1.5 12
Airflow - Static Pressure Characteristics 9A812F41 With pulse sensor 9A812M41 With pulse sensor 9A812L41 With pulse sensor.16.14.12.1.8.6.4.2.16.14.12.1.8.6.4.2 4 3 2 1.4.35.3.25.2.15.1.5 1 9 8 7 6 5 4 3 2 1 4 3 2 1.5 1 2 3 4 5.12.1.8.6.4.2.3.25.2.15.1.5 7 6 5 4 3 2 1.5 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5.5 6 V 1. 26.4 V 1. 1.5.2.4.6.8 1. 1.2 1.4 1.6 1.8 1.5 1 2 3 4 5.12.1.8.6.4.2 3 2 1 3 2 1 6 V.5 1. 1 2 3 4 1. 1.5.5 1. 1 2 3 4.1.8.6.4.2.2.15.1.5 5 4 3 2 1.1.8.6.4.2 2 1 2 1 1 2 3 4 9A824G41 With pulse sensor 9A824S41 With pulse sensor 9A824H41 With pulse sensor 9A824F41 With pulse sensor 9A824M41 With pulse sensor 9A824L41 With pulse sensor.5 7 V.5 1. 1. 14 V 1.5.5 1. 1 2 3 4 Fan 8 mm sq. 121
Dimensions (unit: mm) (With ribs) 8±.5 71.5±.3 8±.5 71.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +5 3 25±.5 (4) (4) (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 122
Fan 8 8 32 mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 13 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.83 9.96 97 2.45 86.5 36 1.45 57 9GA812P2S1.8.96 28.71 25.1 3.12 24 1.2 to 13.8 1.59 7.8 87 2.2 77.7 294 1.18 54 9GA812P2H1 12.5.6 26.66 23.3 26.15 21-2 to +7 9GA812P2M1 1.2 to 12.6 1.35 4.2 67 1.69 59.6 171.68 47.4.48 14.35 12.3 7.5.3 1-2 to +55 4/6 C 9GA824P2S1 24 2.4 to 27.6 1.42 1.1 97 2.45 86.5 36 1.45 57.5 1.2 28.71 25.1 3.12 24-2 to +7 9GA848P2S1 48 4.8 to 55.2 1.22 1.56 97 2.45 86.5 36 1.45 57.4 1.92 28.71 25.1 3.12 24-1 to +7 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 552 to 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P2S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 V PWM デューティ 1% 5% % 1 2 2 4 6 8 1 3 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 1.2 V 1 2 2 4 6 8 1 3 (min -1 ) 1 9 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 97 min -1 28 min -1 1 (%) 123
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P2H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4 1.2 V PWM デューティ 1% 5% % 1 2 2 4 6 8 1 3 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4 1.2 PWM PWMduty デューティ cycle 1% 1.2 V 1 2 2 4 6 8 1 3 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 9 87 min -1 8 7 6 5 4 3 26 min -1 2 1 1 (%) 9GA812P2M1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.8 2.6 15.4 1.2 5 V PWM デューティ 1% 5% % 1 2 1 2 3 4 5 6 7.8 2.6 15.4 1.2 5 PWM duty デューティ cycle 1% 12.6 V 1.2 V 1 1 2 3 4 5 6 7 2 (min -1 ) 1 9 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 67 min -1 14 min -1 1 (%) 9GA824P2S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 124 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 5 4 3 2 1 % % 48 V V PWM デューティ 1% 5% V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 1 2 3 2 4 6 8 1 9GA848P2S1 With pulse sensor with PWM control function PWM 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 2.4 V 1 2 3 2 4 6 8 1 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V 1 2 3 2 4 6 8 1 (min -1 ) 1 9 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 97 min -1 28 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :48 VV (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 97 min -1 9 8 7 6 5 4 3 2 28 min -1 1 1 (%)
Dimensions (unit: mm) (With ribs) 8±.5 71.5±.3 4-ø4.5±.3 取付用穴 Mounting hole Lead リード線 wire AWG26 UL 143 +5 3 71.5±.3 8±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 71.5±.3 4-ø4.5 78.5 Fan 8 mm sq. (1) ø9 71.5±.3 (4) (4) 32±.5 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 125
Fan 8 8 38 mm San Ace 8 9HVA type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 22 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 3.5 42 161 3.75 132 135 5.4 73 4/6 C 9HVA812P1G1 12 1.8 to 13.2-2 to +7 2.2 2.4 42.96 33.9 15.42 44 (7/4 C) * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HVA812P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 5 4 3 2 1 14 12 1 8 6 4 2 2% 1 2 3 V PWM デューティ 1% 6% 2 4 6 8 1 12 14 4 5 4 3 2 1 14 12 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V 1 2 3 4 2 4 6 8 1 12 14 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 18 16 161 min -1 14 12 1 8 6 4 2 1 (%) 126
Dimensions (unit: mm) (With ribs) 8±.5 71.5±.3 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG22 UL 3266 +5 3 Fan 8 mm sq. (1) (4) (4) 71.5±.3 8±.5 Rotating 回転方向 direction 38±.5 Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 Inlet side, Outlet side 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 127
Fan 8 8 38 mm San Ace 8 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 23 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 3.4 4.8 149 3.7 13.7 1 4. 69 9HV812P1G61 12 1.8 to 13.2.25 3 44 1.6 37.5 87.2.35 4-2 to +7 4/6 C 9HV824P1G3** 24 21.6 to 26.4 1 1.7 4.8 149 3.7 13.7 1 4. 69 (7/4 C) 1.85 4.8 149 3.7 13.7 1 4. 69 9HV848P1G1 48 36 to 57-1 to +7.13 6.24 44 1.6 37.5 87.2.35 4 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Model no. for a ribless frame model is 9HV824P1G11. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV812P1G61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 % V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 1214 4 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 PWM duty デューティ cycle 1% 13.2 V 1.8 V 1 2 3 2 4 6 8 1 1214 4 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 149 min -1 14 12 1 8 6 4 44 min -1 2 1 (%) 128
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV824P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 PWM デューティ 1% 5% V 1 2 3 4 2 4 6 8 1 12 14 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 PWM duty デューティ cycle 1% 26.4 V 21.6 V 1 2 3 4 2 4 6 8 1 12 14 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 149 min -1 (%) Fan 8 mm sq. 9HV848P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 % 48 V V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 1214 4 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 12 1 8 6 4 2 PWM duty デューティ cycle 1% 57 V 48 V 36 V 1 2 3 4 2 4 6 8 1 1214 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 149 min -1 44 min -1 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 38±.5 (4) (4) 8±.5 71.5±.3 +5 3 (1) 71.5±.3 8±.5 リード線 Lead wire AWG22 UL 143 Rotating 回転方向 direction Airflow 風吹出方向 direction 129
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 71.5±.3 4-ø4.5 71.5±.3 4-ø4.5 78.5 ø83 71.5±.3 78.5 ø9 71.5±.3 78.5 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 13
Fan 8 8 38 mm San Ace 8 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 16 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA812P1G61 1 1.2 14.4 15 2.85 1.6 48 1.93 6.4.48 2.51 18. 28.7.11 21 9GA812P1S61 12 1.8 to 13.2 1.94 11.28 955 2.6 91.8 48 1.93 59.1 1.2 29.74 26.1 6.24 27 1.6 7.2 825 2.25 79.4 38 1.53 55 9GA812P1H61.8.96 25.64 22.6 45.18 24 4/6 C -2 to +7 1.47 11.28 955 2.6 91.8 48 1.93 59 (7/4 C) 9GA824P1S61.6 1.44 29.74 26.1 6.24 27 24 2.4 to 27.6 1.3 7.2 825 2.25 79.4 38 1.53 55 9GA824P1H61.5 1.2 25.64 22.6 45.18 24 9GA848P1S61 48 4.8 to 55.2 1.25 12 955 2.6 91.8 48 1.93 59.4 1.92 299.74 26.1 6.24 27 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 552). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P1G61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 6 V 2.2 2. 5 PWM デューティ 1.8 1% 1.6 4 1.4 1.2 3 1..8 2.6 5%.4 1.2 % 1 2 3 2 4 6 8 1 2.4 6 PWM PWMduty デューティ cycle 1% 1% 2.2 2. 1.8 1.6 5 4 13.2 V 1.4 1.8 V 1.2 1..8 3 2.6.4 1.2 1 2 3 2 4 6 8 1 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 11 15 min 1-1 9 8 7 6 5 4 3 2 2 min -1 1 1 (%) 131
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA812P1S61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 132 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % 12 V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 % V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 % V PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 9GA812P1H61 With pulse sensor with PWM control function PWM 9GA824P1S61 With pulse sensor with PWM control function PWM Static pressure 静圧 % V PWM デューティ 1% 1 2 3 2 4 6 8 1 9GA824P1H61 With pulse sensor with PWM control function PWM 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 5% 2. 5 1.8 2.4 6 2.2 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4 1.2 1.6 4 1.4 1.2 3 1..8 2.6.4.2 1.8 1.6 1.4 1.2 1..8.6.4.2 1 2.4 6 2.2 2. 5 4 3 2 1 5 2. 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4.2 1 PWM PWMduty デューティ cycle 1% 1% 1 13.2 V 2 4 6 8 PWM PWMduty デューティ cycle 1% 1% 13.2 V 1.8 V 2 1.8 V 1 2 2 4 6 8 1 3 1 PWM 1% PWMデューティ1% 1 2.4 V 2 2 4 6 8 2 3 3 1 PWM 1% PWMデューティ1% 1 2.4 V 2 4 6 8 3 1 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 955 min -1 8 6 4 29 min -1 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 8 825 min -1 6 4 2 25 min -1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 955 min -1 8 6 4 29 min -1 2 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 8 825 min -1 6 4 2 25 min -1 1 (%)
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA848P1S61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % 48 48 VV PWM デューティ 1% 5% 1 2 3 2 4 6 8 1 2.4 6 2.2 2. 5 1.8 1.6 1.4 1.2 1..8.6.4.2 4 3 2 1 PWM 1% PWMデューティ1% 1 55.2 V 48 V 4.8 V 2 2 4 6 8 3 1 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 955 min -1 4-ø4.5±.3 Mounting 取付用穴 hole +5 3 (1) 71.5±.3 8±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 4-ø4.5 ø9 78.5 71.5±.3 8 6 4 2 29 min -1 1 (%) Fan 8 mm sq. Dimensions (unit: mm) (With ribs) 8±.5 71.5±.3 Lead リード線 wire AWG26 UL 143 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 78.5 133
Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 134
Fan 8 8 38 mm San Ace 8 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 22 g Fan 8 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 3.8 45.6 12 3.9 138. 49. 1.97 65 9GV812P1G3.32 3.84 3 1.15 4.6 42.4.17 34 1.8 to 13.2 1 3. 36. 97 3.7 131. 44. 1.77 63 9GV812P1H3.2 2.4 29 1.11 39.2 39..16 34 12 1 1.5 18 8 3.5 18. 31. 1.21 58 9GV812P1F3.12 1.44 24.92 32. 27.1.11 26 1.2 to 13.8-2 to +7 4/6 C 1.75 9 6 2.29 81. 169..68 51 9GV812P1M3.9 1.8 17.65 23. 13.6.5 19 9GV824P1G3 24 2.4 to 27.6 1 1.6 38.4 12 3.9 138. 49. 1.97 65.3 7.2 47 1.79 63.2 14..41 44 9GV848P1G3 48 4.8 to 55.2 1.84 4.32 12 3.9 138. 49. 1.97 65.15 7.2 47 1.79 63.2 14..41 44 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (pp. 554 to 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 V PWM デューティ 1% 5% % 1 2 3 4 5 2 4 6 8 1 12 14 16 18 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 PWM duty デューティ cycle 1% 13.2 V 1.8 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 11 1 9 8 7 6 5 4 3 2 1 3 min -1 1 (%) 12 min -1 135
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV812P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 1.6 4 1.2 3.8 2.4 1 V PWM デューティ 1% 5% % 1 2 3 4 5 2 4 6 8 1 12 14 16 18 V PWM デューティ 1% 5% % 1 2 3 4 2 4 6 8 1 12 14 9GV812P1F3 With pulse sensor with PWM control function PWM 2.4 6 PWM duty デューティ cycle 1% 2. 5 1.6 4 13.2 V 1.8 V 1.2 3.8 2.4 1 1.6 4.4 1 2 3 4 5 2 4 6 8 1 12 14 16 18 PWM duty デューティ cycle 1% 1.2 3 1.2 V.8 2 1 1 2 3 4 2 4 6 8 1 12 14 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 9 8 7 6 5 4 3 2 1 29 min -1 1 (%) 97 min -1 PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 9 8 8 min -1 7 6 5 4 3 2 24 min -1 1 1 (%) 9GV812P1M3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1. 25 V 1. 25 PWM duty デューティ cycle 1% (min -1 ) 7 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz.8.6.4.2 2 15 1 5 PWM デューティ 1% 5% %.8.6.4.2 2 15 1 5 1.2 V 6 6 min -1 5 4 3 2 17 min -1 1 2 1 2 4 6 8 1 3 1 2 3 2 4 6 8 1 1 (%) 9GV824P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 136 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 V PWM デューティ 1% 5% % 1 2 3 4 5 25 5 75 1 125 15 175 2.4 6 2. 5 1.6 4 1.2 3.8 2.4 1 25 PWM PWMduty デューティ cycle 1% 2.4 V 1 2 3 4 5 5 75 1 125 15 175 Voltage: 電圧 :V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 11 1 9 8 7 6 5 4 3 2 1 47 min -1 1 (%) 12 min -1
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV848P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.4 1.6.8 6 2. 5 4 1.2 3 2.4 1 1 5% % 2 48 VV PWM デューティ 1% 2 4 6 8 11214 1618 3 4 5 2.4.8 6 2. 5 1.6 4 1.2 3 2.4 1 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V 1 2 3 4 5 2 4 6 8 112141618 (min -1 ) 11 1 9 8 7 6 5 4 3 2 1 電圧 Voltage: :48 VV PWM 周波数 frequency: :25 khz 25 khz 12 min -1 47 min -1 1 (%) Fan 8 mm sq. Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole 8±.5 71.5±.3 リード線 Lead wire AWG24 UL 143 +3 3 71.5±.3 8±.5 Inlet side, Outlet side 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 (1) (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 137
Fan 8 8 38 mm San Ace 8 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 17 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G812K11 1.8 to 13.2 1.8 21.6 78 3.1 17.3 31 1.285 58-2 to +6 9G812G11 12 1.1 13.2 63 2.55 9 211.847 51 7 to 13.8 9G812H11.9 1.8 57 2.28 8 171.687 49 9G824G11.56 13.4 63 2.55 9 211.847 51 4/6 C 24 2.4 to 27.6-2 to +7 9G824H11.42 1.1 57 2.28 8 171.687 49 9G848G11.27 13. 63 2.55 9 211.847 51 48 4.8 to 55.2 9G848H11.2 9.6 57 2.28 8 171.687 49 Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G812K11 With pulse sensor 9G812G11 With pulse sensor 9G812H11 With pulse sensor 1.4 1.2 1..8.6.4.2 35 3 25 2 15 1 5.5 13.2 V 1.8 V 1 1.5 2. 2.5 3. 3.5 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 12 1 8 6 4 2.5 1. 7 V 1.5 2. 2.5 3. 2 4 6 8 1 12 2 4 6 8 1 12 2 4 6 8 1.9.8.7.6.5.4.3.2.1 22 2 18 16 14 12 1 8 6 4 2.5 1. 7 V 1.5 2. 2.5 3. 138
Airflow - Static Pressure Characteristics 9G824G11 With pulse sensor 9G824H11 With pulse sensor 9G848G11 With pulse sensor 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 12 2.4 V 1 8 6 4 2.5 1. 1.5 2. 2.5 3. 2 4 6 8 1 12.9.8.7.6.5.4.3.2.1 22 2 18 16 14 12 1 8 6 4 2.5 1. 2.4 V 1.5 2. 2.5 3. 2 4 6 8 1 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 12 1 8 6 4 2.5 1. 55.2 V 48 V 4.8 V 1.5 2. 2.5 3. 2 4 6 8 1 12 Fan 8 mm sq. 9G848H11 With pulse sensor.9.8.7 22 2 18 16 55.2 V.6 14 48 V.5 12 4.8 V.4 1.3.2.1 8 6 4 2.5 1. 1.5 2. 2.5 3. 2 4 6 8 1 Dimensions (unit: mm) (With ribs) 8±.5 71.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +3 3 (1) 71.5±.3 8±.5 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction 139
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.5±.3 4-ø4.5 78.5 ø9 71.5±.3 78.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-49C, 19-49E, 19-49H Model no.: 19-12G Resin filter kits page: p. 521 Model no.: 19-12F13 (13PPI), 19-12F2 (2PPI), 19-12F3 (3PPI), 19-12F4 (4PPI) 14
Fan 92 92 25 mm San Ace 92 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 125 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA912P4J3 9GA912P4G3 9GA912P4S3 9GA924P4J3 9GA924P4G3 9GA924P4S3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.39 4.68 5 2.2 77.7 15.42 43.6.72 15.65 23.3 9.4.4 14 12 1.2 to 13.8 1.28 3.36 44 1.93 68.2 81.33 39.6.72 15.65 23.3 9.4.4 14 1.2 2.4 38 1.67 59. 6.6.24 35.6.72 15.65 23.3 9.4.4 14 1.2 4.8 5 2.2 77.7 15.42 43-2 to +7 6/6 C.4.96 15.65 23.3 9.4.4 14 24 2.4 to 27.6 1.15 3.6 44 1.93 68.2 81.33 39.4.96 15.65 23.3 9.4.4 14 1.12 2.88 38 1.67 59. 6.6.24 35.4.96 15.65 23.3 9.4.4 14 Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P4J3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12.4 1.3.2.1 8 6 4 2 V PWM デューティ 1% 5% % 14.5 12.4 1.3 8 6.2 4.1 2 PWM PWMduty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 5 min -1 4 3 2 15 min -1 1.5 1. 1.5 2. 2.5 2 4 6 8.5 1. 1.5 2. 2.5 2 4 6 8 1 (%) 141
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P4G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4.3.2.1.3.2.1.4.3.2.1 1 8 6 4 2 8 6 4 2 12 1 8 6 4 2 %.5 1. 1.5 2. 2 4 6 5% % V PWM デューティ 1% 5% % V PWM デューティ 1% 5%.5 1. 1.5 2. 2 4 6 V PWM デューティ 1%.5 1. 1.5 2. 2.5 2 4 6 8 9GA912P4S3 With pulse sensor with PWM control function PWM 9GA924P4J3 With pulse sensor with PWM control function PWM.4.3.2.1.3.2.1 1 8 6 4 2 8 6 4 2 PWM PWM duty デューティ cycle 1% 1% 1.2 V.5 1. 1.5 2. 2.5 2 4 6 8 14.5 12.4 1.3 8 6.2 4.1 2 PWM PWMduty デューティ cycle 1% 1.2 V.5 1. 1.5 2. 2 4 6 PWM PWMduty デューティ cycle 1% 2.4 V.5 1. 1.5 2. 2.5 2 4 6 8 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 44 min -1 4 3 2 15 min -1 1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 4 38 min -1 3 2 15 min -1 1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 5 5 min -1 4 3 2 15 min -1 1 1 (%) 9GA924P4G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.4 1 V.4 1 PWM PWMduty デューティ cycle 1% 1% (min -1 ) 5 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz.3.2.1 8 6 4 2 PWM デューティ 1% 5% %.3.2.1 8 6 4 2 2.4 V 4 3 2 1 15 min -1 44 min -1 142.5 1. 1.5 2. 2 4 6.5 1. 1.5 2. 2.5 2 4 6 8 1 (%)
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA924P4S3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example.3.2.1 8 6 4 2 PWM デューティ 1% 5% % V.3.2.1 8 PWM PWMduty デューティ cycle 1% (min -1 ) 6 4 2.4 V 2 5 4 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 38 min -1 3 2 15 min -1 1 Fan 92 mm sq..5 1. 1.5 2. 2 4 6.5 1. 1.5 2. 2 4 6 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 92±.5 82.5±.3 Lead リード線 wire AWG26 UL 17 +5 3 82.5±.3 92±.5 (1) (4) 25.2±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 9.5 4-ø4.5 9.5 4-ø4.5 9.5 ø97 82.5±.3 9.5 ø18 82.5±.3 82.5±.3 82.5±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 143
Fan 92 92 25 mm San Ace 92 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 1 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S912F41.14 1.68 265 1.26 44.5 3..12 27 5. to 13.8 9S912M41 12.11 1.32 225 1.7 37.8 21.6.87 22 9S912L41 6. to 13.8.7.84 175.83 29.3 13.1.53 17 9S924F41.9 2.16 265 1.26 44.5 3..12 27-1 to +7 4/6 C 9S924M41 24 14 to 26.4.7 1.68 225 1.7 37.8 21.6.87 22 9S924L41.4.96 175.83 29.3 13.1.53 17 Other sensor specifications are available as options. Refer to the index (p. 557). Airflow - Static Pressure Characteristics 9S912F41 With pulse sensor 9S912M41 With pulse sensor 9S912L41 With pulse sensor.16.14.12.1.8.6.4.2 4 35 3 25 2 15 1 5.5 1. 5 V 1.5 1 2 3 4 5.12.1.8.6.4.2 3 25 2 15 1 5 5 V.2.4.6.8 1. 1.2 1.4 1 2 3 4 5.8.7.6.5.4.3.2.1 2 15 1 5.2.4.6.8 6 V 1. 1.2 1 2 3 4 144
Airflow - Static Pressure Characteristics 9S924F41 With pulse sensor 9S924M41 With pulse sensor 9S924L41 With pulse sensor.16.14.12.1.8.6.4.2 4 35 3 25 2 15 1 5 26.4 V 14 V.5 1. 1.5 1 2 3 4 5 6 4-ø4.3±.3 Mounting 取付用穴 hole (4) 25±.5 (4) 92±.5 82.5±.3 Lead リード線 wire AWG24 UL 17 +5 3 (1) 82.5±.3 92±.5 Airflow 風吹出方向 direction Rotating 回転方向 direction 9.5 4-ø4.5 82.5±.3 ø12 9.5.12.1.8.6.4.2 3.8 2 25 26.4 V.7 26.4 V.6 15 2.5 15 14 V.4 1 14 V 1.3.2 5 5.1.2.4.6.8 1. 1.2 1.4.2.4.6.8 1. 1.2 1 2 3 4 5 1 2 3 4 Fan 92 mm sq. Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 82.5±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 145
Fan 92 92 25 mm San Cooler 92 9A type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 1 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9A912G41.39 4.68 39 1.76 62.1 66.5.267 43 3/6 C -2 to +6 9A912S41.27 3.24 355 1.66 58.6 56.1.225 39 9A912H41 6 to 13.8.21 2.52 315 1.45 51.2 44.177 33 12 9A912F41.14 1.68 265 1.24 43.8 32.2.129 3-2 to +7 9A912M41.12 1.44 225 1.4 36.7 22.6.91 27 4/6 C 9A912L41 7 to 13.8.7.84 175.8 28.2 13.4.54 23 9A924G41.19 4.56 39 1.76 62.1 66.5.267 43-2 to +6 3/6 C 9A924S41.15 3.6 355 1.66 58.6 56.1.225 39 9A924H41 12 to 27.6.1 2.4 315 1.45 51.2 44.177 33 24 9A924F41.8 1.92 265 1.24 43.8 32.2.129 3-2 to +7 4/6 C 9A924M41.5 1.2 225 1.4 36.7 22.6.91 27 9A924L41 14 to 27.6.4.96 175.8 28.2 13.4.54 23 9A948S41 48 4.5 to 53.8 3.84 355 1.66 58.6 56.1.225 39-2 to +6 Other sensor specifications are available as options. Refer to the index (p. 547). Airflow - Static Pressure Characteristics 9A912G41 With pulse sensor 9A912S41 With pulse sensor 9A912H41 With pulse sensor.4.35.3.25.2.15.1.5 1 8 6 4 6 V 2.4.8 1.2 1.6 2..3.25.2.15.1.5 8 7 6 5 4 6 V 3 2 1.5 1. 1.5 2. 2.5.25.2.15.1.5 6 5 4 6 V 3 2 1.5 1. 1.5 2. 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 146
Airflow - Static Pressure Characteristics 9A912F41 With pulse sensor 9A912M41 With pulse sensor 9A912L41 With pulse sensor.2.18.16.14.12.1.8.6.4.2 5 4 3 2 1 6 V.5 1. 1.5 1 2 3 4 5 6.16.14.12.1.8.6.4.2 4 3 2 1 6 V.5 1. 1.5 1 2 3 4 5.12.1.8.6.4.2 3 2 1 7 V.2.4.6.8 1. 1 2 3 Fan 92 mm sq. 9A924G41 With pulse sensor 9A924S41 With pulse sensor 9A924H41 With pulse sensor.4.35.3.25.2.15.1.5 1 8 6 4 2.4.8 1.2 1.6 2..3.25.2.15.1.5 8 7 6 5 4 3 2 1.5 1. 1.5 2. 2.5.25.2.15.1.5 6 5 4 3 2 1.5 1. 1.5 2. 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 9A924F41 With pulse sensor 9A924M41 With pulse sensor 9A924L41 With pulse sensor.2.18.16.14.12.1.8.6.4.2 5 4 3 2 1.5 1. 1.5 1 2 3 4 5 6.16.14.12.1.8.6.4.2 4 3 2 1.5 1. 1.5 1 2 3 4 5.12 3.1.8 2.6 14 V.4 1.2.2.4.6.8 1. 1 2 3 9A948S41 With pulse sensor 8.3 7.25 6.2 5.15 4 3.1 2.5 1 53 V 48 V 4.5 V.5 1. 1.5 2. 2.5 1 2 3 4 5 6 7 8 147
Dimensions (unit: mm) (With ribs) 92±.5 82.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole 25±.5 (4) (4) Lead リード線 wire AWG24 UL 17 92±.5 82.5±.3 +5 3 (1) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 9.5 4-ø4.5 Outlet side 9.5 4-ø4.5 82.5±.3 ø92 9.5 82.5±.3 ø12 9.5 82.5±.3 82.5±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 148
Fan 92 92 32 mm San Ace 92 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 17 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G912A21.58 6.96 43 2.5 88.3 115.462 44 9G912S21.38 4.56 35 2. 7.7 77.39 38 12 1.2 to 13.8 9G912H21.23 2.76 285 1.59 56.2 51.25 32-2 to +7 9G912M21.13 1.56 21 1.2 42.4 27.18 25 9G924A21.3 7.2 43 2.5 88.3 115.462 44-2 to +6 9G924S21.19 4.56 35 2. 7.7 77.39 38 24 2.4 to 27.6 9G924H21.12 2.88 285 1.59 56.2 51.25 32 4/6 C 9G924M21.8 1.92 21 1.2 42.4 27.18 25 9G948A21.16 7.68 43 2.5 88.3 115.462 44-2 to +7 9G948S21.11 5.28 35 2. 7.7 77.39 38 48 4.8 to 55.2 9G948H21.8 3.84 285 1.59 56.2 51.25 32 9G948M21.5 2.4 21 1.2 42.4 27.18 25 Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G912A21 With pulse sensor 9G912S21 With pulse sensor 9G912H21 With pulse sensor.6.5.4.3.2.1 16 14 12 1 8 6 4 2 1.2 V.5.4.3.2.1 12 1 8 6 4 2 1.2 V.5 1. 1.5 2. 2.5 3..5 1. 1.5 2. 2.5.5 1. 1.5 2. 1 2 3 4 5 6 7 8 9 1 11 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7.3.25.2.15.1.5 8 6 4 2 1.2 V 149
Airflow - Static Pressure Characteristics 9G912M21 With pulse sensor 9G924A21 With pulse sensor 9G924S21 With pulse sensor 1.5 1.25 1..75.5.25.3.25.2.15.1.5 8 6 4 2.5.4.3.2.1 4 3 2 1 12 1 8 6 4 2 2.4 V.5 1. 1.5 2. 1 2 3 4 5 6 7 55.2 V 1.2 V.5 1. 1.5 48 V 4.8 V 1 2 3 4 5 6.6.5.4.3.2.1 16 14 12 1 8 6 4 2 1.5 1.25 1..75.5.25.3.25.2.15.1.5 2.4 V.5 1. 1.5 2. 2.5 3. 1 2 3 4 5 6 7 8 9 1 11 4 3 2 1 8 6 4 2 55.2 V 2.4 V.5 1. 1.5 48 V 4.8 V 1 2 3 4 5 6.5.4.3.2.1.6.5.4.3.2.1 12 1 8 6 4 2 16 14 12 1 8 6 4 2 1.5 1.25 1..75.5.25 55.2 V 48 V 2.4 V.5 1. 1.5 2. 2.5 1 2 3 4 5 6 7 8 9 9G924H21 With pulse sensor 9G924M21 With pulse sensor 9G948A21 With pulse sensor 4.8 V.5 1. 1.5 2. 2.5 3. 1 2 3 4 5 6 7 8 9 1 11 9G948S21 With pulse sensor 9G948H21 With pulse sensor 9G948M21 With pulse sensor 4 3 2 1 55.2 V 48 V 4.8 V.5 1. 1.5 2. 2.5.5 1. 1.5 2..5 1. 1.5 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 1 2 3 4 5 6 15
Dimensions (unit: mm) (With ribs) 92±.5 82.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 17 +3 3 (1) Fan 92 mm sq. 82.5±.3 92±.5 (4) (4) 32±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø4.5 82.5±.3 4-ø4.5 9.5 ø13 82.5±.3 9.5 ø18 82.5±.3 9.5 9.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 151
Fan 92 92 38 mm San Ace 92 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 24 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 2.1 25.2 97 4. 141 5 2.1 63 9GA912P1H3 12 1.2 to 13.8-2 to +7.16 1.92 25.97 34.3 33.13 29 4/6 C 1 1.1 26.4 97 4. 141 5 2.1 63 9GA924P1H1 24 2.4 to 27.6-1 to +7 (7/4 C).7 1.68 25.97 34.3 33.13 29 9GA948P1H3** 48 4.8 to 55.2 1.55 26.4 97 4. 141 5 2.1 63-2 to +7 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 553). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA912P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.5 2. 1.5 1..5 7 6 5 4 3 2 1 % V PWM デューティ 1% 5% 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 25 min -1 97 min -1 1 2 3 4 5 2 4 6 8 112141618 1 2 3 4 2 4 6 8 112 141618 5 1 (%) 152
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA924P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.5 2. 1.5 1..5 7 6 5 4 3 2 1 % V PWM デューティ 1% 5% 1 2 3 4 5 2 4 6 8 112141618 7 2.5 6 PWM PWMduty デューティ cycle 1% 2. 5 1.5 4 2.4 V 1. 3.5 2 1 1 2 3 4 5 2 4 6 8 112 141618 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 1 97 min -1 8 6 4 2 25 min -1 1 (%) Fan 92 mm sq. 9GA948P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2.5 6 48 VV 2.5 6 PWM PWMduty デューティ cycle 1% (min -1 ) 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 97 min -1 2. 1.5 1..5 5 4 3 2 1 PWM デューティ 1% 5% 2. 1.5 1..5 5 4 3 2 1 55.2 V 48 V 4.8 V 8 6 4 2 1 2 3 4 5 1 15 5 1 2 3 4 5 5 1 15 1 (%) Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 143 92±.5 82.5±.3 3 +3 (1) 82.5±.3 92±.5 (4) 38±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 153
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 82.5±.3 4-ø4.5 Outlet side 82.5±.3 4-ø4.5 ø13 ø18 9.5 82.5±.3 9.5 82.5±.3 9.5 9.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 154
Fan 92 92 38 mm San Ace 92 9HV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 25 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 5.2 62.4 149 5.1 18 11 4.42 72 9HV912P1G1 12 8 to 12.6.8 9.6 45 1.54 54.4 16.64 44 4/6 C -2 to +7 1 1.2 57.6 149 5.1 18 11 4.42 72 (7/4 C) 9HV948P1G1 48 36 to 6.15 7.2 45 1.54 54.4 16.64 44 * PWM frequency: 25 khz Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV912P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 (Pa) 12 1 8 6 4 2 % 1 2 3 4 V PWM デューティ 1% 5% 5 6 2 4 6 8 1 12 14 1618 2 (inch H2O) 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 (Pa) 12 1 8 6 4 2 PWM duty デューティ cycle 1% 12.6 V 1 2 3 8 V 4 5 6 2 4 6 8 112 1416 18 2 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 16 149 min -1 14 12 1 8 6 4 2 1 (%) 9HV948P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12 4.5 4. 1 3.5 8 3. 2.5 6 2. 1.5 4 1. 2.5 % 1 2 3 4 48 V V PWM デューティ 1% 5% 5 6 2 4 6 8112 1416 18 2 12 4.5 4. 1 3.5 8 3. 2.5 6 2. 1.5 4 1. 2.5 PWM PWMduty デューティ cycle 1% 6 V 48 V 1 2 3 36 V 4 5 6 2 4 6 8 112 1416 182 (min -1 ) 16 14 12 1 8 6 4 2 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 149 min -1 1 (%) 155
Dimensions (unit: mm) (With ribs) 4-ø4.5±.3 Mounting 取付用穴 hole 92±.5 9.5 4-ø4.5 9.5 4-ø4.5 9.5 ø97 82.5±.3 9.5 ø15 82.5±.3 82.5±.3 +5 3 (1) 82.5±.3 92±.5 Lead リード線 wire AWG22 UL 3266 (4) (4) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 82.5±.3 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 156
Fan 92 92 38 mm San Ace 92 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 25 g Fan 92 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GV912P1G3 9GV912P1H3 9GV912P1F3 9GV948P1H3 9GV948P1F3 * PWM frequency: 25 khz Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 4.1 49.2 9 5.35 189. 43. 1.73 68 1.8 to 13.2.33 4. 29 1.72 6.8 44.6.18 37-2 to +7 1 3.5 42. 85 5.5 178. 385. 1.55 64 12.29 3.5 27 1.6 56.5 38.8.16 34 1.2 to 13.8 1 1.9 22.8 7 4.15 146.6 261 1.5 59-1 to +7 4/6 C.16 1.92 22 1.3 45.9 25.7.1 31 1.82 39.4 85 5.5 178. 385. 1.55 64-2 to +7.14 6.7 4 2.37 83.7 85.2.34 45 48 4.8 to 55.2 1.48 23.4 7 4.15 146.6 261 1.5 59-1 to +7.12 5.76 35 2.7 73.1 65.2.26 42 Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV912P1G3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 45 4 35 3 25 2 15 1 5 V PWM duty デューティ cycle 1% % 5% 1 2 3 4 5 6 5 1 15 2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 45 4 35 3 25 2 15 1 5 PWM PWMduty デューティ cycle 1% 13.2 V 1 2 3 4 1.8 V 5 6 5 1 15 2 Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 min -1 29 min -1 9 8 7 6 5 4 3 2 1 1 (%) 157
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV912P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 V PWM デューティ 1% 5% % 1 2 3 4 5 6 5 1 15 2 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 PWM PWMduty デューティ cycle 1% 1.2 V 1 2 3 4 5 6 5 1 15 2 (min -1 ) 9 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 85 min -1 27 min -1 1 (%) 9GV912P1F3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 % 1 2 3 V PWM デューティ 1% 4 5 6 5 1 15 2 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM PWMduty デューティ cycle 1% 1.2 V 1 2 3 4 5 6 5 1 15 2 (min -1 ) 9 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 22 min -1 1 (%) 7 min -1 9GV948P1H3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 48 V V PWM デューティ 1% 5% % 1 2 3 4 5 6 5 1 15 2 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V 1 2 3 4 5 6 5 1 15 2 (min -1 ) 9 8 7 6 5 4 3 2 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 85 min -1 4 min -1 1 (%) 9GV948P1F3 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 158 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 % 1 2 3 4 5 1 15 48 VV PWM デューティ 1% 5 6 2 1.4 35 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V 1 2 3 4 5 1 15 5 6 2 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 8 7 7 min -1 6 5 4 35 min 3-1 2 1 1 (%)
Dimensions (unit: mm) (With ribs) 92±.5 82.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 143 +3 3 Fan 92 mm sq. (1) 82.5±.3 (4) 38±.5 (4) 92±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø4.5 82.5±.3 4-ø4.5 ø13 ø18 9.5 82.5±.3 9.5 82.5±.3 9.5 9.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 159
Fan 92 92 38 mm San Ace 92 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 18 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G912G11 1.1 13.2 5 3.1 11 15.62 5 12 7. to 13.8 9G912H11.58 6.96 4 2.54 9 1.42 43-2 to +6 9G924G11.55 13.2 5 3.1 11 15.62 5 24 2.4 to 27.6 9G924H11.3 7.2 4 2.54 9 1.42 43 4/6 C 9G948J11.32 15.36 55 3.41 12.49 178.715 55-2 to +7 9G948G11 48 4.8 to 55.2.27 12.96 5 3.1 11 15.62 5-2 to +6 9G948H11.16 7.68 4 2.54 9 1.42 43 Other sensor specifications are available as options. Refer to the index (p. 549). Airflow - Static Pressure Characteristics 9G912G11 With pulse sensor 9G912H11 With pulse sensor 9G924G11 With pulse sensor.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 7 V.5 1. 1.5 2. 2.5 3. 3.5 2 4 6 8 1 12 16.6 14.5 12.4 1.3 8 6.2 4.1 2 7 V.5 1. 1.5 2. 2.5 3. 2 4 6 8 1.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 2.4 V.5 1. 1.5 2. 2.5 3. 3.5 2 4 6 8 1 12 16
Airflow - Static Pressure Characteristics 9G924H11 With pulse sensor 9G948J11 With pulse sensor 9G948G11 With pulse sensor.6.5.4.3.2.1.6.5.4.3.2.1 16 14 12 1 8 6 4 2 16 14 12 1 8 6 4 2 55.2 V 2.4 V.5 1. 1.5 2. 2.5 3. 2 4 6 8 1 9G948H11 With pulse sensor 48 V 4.8 V.5 1. 1.5 2. 2.5 3. 2 4 6 8 1 1..8.7.6.5.4.3.2.1 22 2 18 16 14 12 1 8 6 4 2 55.2 V 48 V 4.8 V.5 1. 1.5 2. 2.5 3. 3.5 4. 2 4 6 8 1 1214.8.7.6.5.4.3.2.1 2 18 16 14 12 1 8 6 4 2 55.2 V 48 V 4.8 V.5 1. 1.5 2. 2.5 3. 3.5 2 4 6 8 1 12 Fan 92 mm sq. Dimensions (unit: mm) (With ribs) 92±.5 82.5±.3 4-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +3 3 (1) 82.5±.3 92±.5 (4) 38±.5 (4) Rotating 回転方向 direction Airflow 風吹出方向 direction 161
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 82.5±.3 4-ø4.5 82.5±.3 4-ø4.5 ø13 ø18 9.5 82.5±.3 9.5 82.5±.3 9.5 9.5 Options Finger guards page: p. 513 Resin finger guards page: p. 52 Model no.: 19-99C, 19-99E, 19-99H Model no.: 19-11G Resin filter kits page: p. 521 Model no.: 19-11F13 (13PPI), 19-11F2 (2PPI), 19-11F3 (3PPI), 19-11F4 (4PPI) 162
Fan 12 12 25 mm San Ace 12 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 14 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9S1212H41 5. to 13.2.39 4.68 27 2.45 86.5 45.2.18 36-1 to +6 9S1212F41 5. to 13.8.19 2.28 22 2. 7.6 3..12 3 12 4/6 C -1 to +7 9S1212M41 6. to 13.8.13 1.56 185 1.66 58.6 22.7.9 24 9S1212L41 7. to 13.8.8.96 15 1.36 48.1 14.9.6 17 9S1224M41 24 14 to 26.4.6 1.44 185 1.66 58.6 22.7.9 24 Other sensor specifications are available as options. Refer to the index (pp. 557 to 558). Airflow - Static Pressure Characteristics 9S1212H41 With pulse sensor 9S1212F41 With pulse sensor 9S1212M41 With pulse sensor.25 6.2 5 4.15 3.1 2.5 1 13.2 V 5 V.2 5 4.15 3.1 2.5 1 5 V 4.15 3.1 2.5 1 6 V.5 1. 1.5 2. 2.5 3. 2 4 6 8 1.5 1. 1.5 2. 1 2 3 4 5 6 7 8 2.5.5 1. 1.5 2. 1 2 3 4 5 6 7 163
Airflow - Static Pressure Characteristics 9S1212L41 With pulse sensor 9S1224M41 With pulse sensor 4.15.15 4.1.5 3 2 1 7 V.1.5 3 2 1 14 V 26.4 V.5 1. 1.5 2. 1 2 3 4 5 6 7 4-ø4.3±.3 Mounting 取付用穴 hole 119±.5 14.8±.3 Lead リード線 wire AWG24 UL 17 14.8±.3 119±.5 +3 3 (1) (5) (5) +1 25 Rotating 回転方向 direction Airflow 風吹出方向 direction 14.8±.3 4-ø4.5 14.8±.3 4-ø4.5 117 ø126 14.8±.3 117 ø134 14.8±.3.5 1. 1.5 2. 1 2 3 4 5 6 7 Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 117 117 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 164
Fan 12 12 25 mm San Ace 12 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown (For models without PWM control function, there is no speed control wiring.) Mass 28 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. 9GA1212P4G1 9GA1212P4S1 9GA1224P4G1 9GA1224P4S1 9GA1248P4G1 9GA1248P4S1 Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1.93 11.16 64 3.8 134 365 1.47 57 12 1.2 to 13.8 25.16 1.92 255 1.5 53 6.24 34 1.61 7.32 54 3.2 113 26 1.4 54 25.16 1.92 255 1.5 53 6.24 34 1.47 11.28 64 3.8 134 365 1.47 57 24 2.4 to 27.6 25.1 2.4 255 1.5 53 6.24 34 4/6 C -2 to +7 1.31 7.44 54 3.2 113 26 1.4 54 (7/4 C) 25.1 2.4 255 1.5 53 6.24 34 1.24 11.52 64 3.8 134 365 1.47 57 48 4.8 to 53 25.8 3.84 255 1.5 53 6.24 34 1.16 7.68 54 3.2 113 26 1.4 54 25.8 3.84 255 1.5 53 6.24 34 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GA1212G41.93 11.16 64 3.8 134 365 1.47 57 12 7 to 13.8 9GA1212S41.61 7.32 54 3.2 113 26 1.4 54 9GA1224G41.47 11.28 64 3.8 134 365 1.47 57 4/6 C 24 14 to 27.6-2 to +7 9GA1224S41.31 7.44 54 3.2 113 26 1.4 54 (7/4 C) 9GA1248G41.24 11.52 64 3.8 134 365 1.47 57 48 36 to 53 9GA1248S41.16 7.68 54 3.2 113 26 1.4 54 Other sensor specifications are available as options. Refer to the index (p. 553). 165
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA1212P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 5% 25% 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min -1 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 (%) 9GA1212P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.25 3 1. 25.75 2 15.5 1.25 35 5 V PWM デューティ 1% 5% 25% 35 1.25 3 1. 25 2.75 15.5 1.25 5 PWM PWMduty デューティ cycle 1% 1.2 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 54 min -1 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 (%) 9GA1224P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 4 1.5 3 1. 2.5 1 V PWM デューティ 1% 5% 25% 2. 5 4 1.5 3 1. 2.5 1 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min -1 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 (%) 9GA1224P4S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.25 3 1. 25.75 2 15.5 1.25 35 5 V PWM デューティ 1% 5% 25% 35 1.25 3 1. 25 2.75 15.5 1.25 5 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 54 min -1 166 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 2 3 4 5 2 4 6 8 1 12 14 16 18 1 (%)
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA1248P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 5 4 1.5 3 1. 2.5 1 1.25 3 1. 25.75 2 15.5 1.25 1 2 3 4 5 2 4 6 8 1 12 14 16 18 35 5 48 VV PWM デューティ 1% 5% 25% 48 VV PWM デューティ 1% 5% 25% 1 2 3 4 5 2 4 6 8 1 12 14 16 18 9GA1248P4S1 With pulse sensor with PWM control function 2. 1.5 1..5 5 4 3 2 1 1.25 1..75.5.25 PWM PWMduty デューティ cycle 1% 53 V 48 V 4.8 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 35 3 25 2 15 1 5 PWM PWMduty デューティ cycle 1% 53 V 48 V 4.8 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 1 (%) 64 min -1 PWM PWM duty - Speed characteristics example 6 5 4 3 2 1 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 7 6 5 4 3 2 1 1 (%) 54 min -1 Fan 12 mm sq. 9GA1212G41 With pulse sensor 9GA1212S41 With pulse sensor 9GA1224G41 With pulse sensor 2. 5 4 1.5 3 1. 2.5 1 7 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 35 1.25 3 1..75 25 2 15.5 1 7 V.25 5 1 2 3 4 5 2 4 6 8 1 12 14 16 18 2. 5 4 1.5 3 1. 2.5 1 14 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 9GA1224S41 With pulse sensor 9GA1248G41 With pulse sensor 9GA1248S41 With pulse sensor 35 1.25 3 1..75 25 2 15.5 1 14 V.25 5 1 2 3 4 5 2 4 6 8 1 12 14 16 18 2. 5 53 V 1.5 4 48 V 3 1. 36 V 2.5 1 1 2 3 4 5 2 4 6 8 1 12 14 16 18 35 1.25 3 1. 25 2.75 15.5 1.25 5 53 V 48 V 36 V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 167
Dimensions (unit: mm) (With pulse sensor with PWM control function) 4-ø4.5±.3 Mounting 取付用穴 hole 25.4±.5 (5) (5) 12±.8 14.8±.3 +3 3 (1) 14.8±.3 12±.8 Lead リード線 wire AWG24 UL 17 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø4.5 14.8±.3 4-ø4.5 ø127 ø135 118 14.8±.3 118 14.8±.3 Outlet side 118 118 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 168
Fan 12 12 25 mm San Ace 12 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 26 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV1212P4G1 12 1.2 to 13.8 1 1.68 2.16 51 4.83 171 224.9 58.18 2.16 165 1.56 55.1 23.5.9 3 9GV1224P4G1 24 2.4 to 27.6 1.84 2.16 51 4.83 171 224.9 58.13 3.12 165 1.56 55.1 23.5.9 3 9GV1248P4J1 4.8 to 55.2 1.5 24. 54 5.11 18 251 1.1 59.15 7.2 3 2.84 1 77.5.31 47-2 to +7 4/6 C 1.42 2.16 51 4.83 171 224.9 58 9GV1248P4G1 48.7 3.36 165 1.56 55.1 23.5.9 3 4.8 to 6. 1.33 15.84 46 4.35 154 182.73 55 9GV1248P4H1.7 3.36 165 1.56 55.1 23.5.9 3 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 1. 25.8 2.6 15.4 1.2 5 V PWM デューティ 1% 5% % 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM duty デューティ cycle 1% 1.2 V Voltage: 電圧 : V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 5 4 3 2 165 min -1 1 51 min -1 1 2 3 4 5 5 1 15 2 6 1 2 3 4 5 6 5 1 15 2 1 (%) 169
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1224P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 V 1.2 3 PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 :24 V PWM 周波数 frequency: :25 khz 25 khz 1..8.6.4.2 1.2 1..8.6.4.2 25 2 15 1 5 3 25 2 15 1 5 1 5 1 15 % 5% % 2 PWM デューティ 1% 5% PWM デューティ 1% 3 4 5 6 2 48 VV 9GV1248P4J1 With pulse sensor with PWM control function PWM 1..8.6.4.2 1.2 1..8.6.4.2 25 2 15 1 5 3 25 2 15 1 5 1 2 3 4 5 6 5 1 15 2 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 2.4 V 4.8 V 5 51 min -1 4 3 2 165 min -1 1 1 (%) PWM duty - Speed characteristics example Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 6 54 min -1 5 4 3 3 min -1 2 1 1 2 3 4 5 6 5 1 15 2 1 2 3 4 5 6 5 1 15 2 1 (%) 9GV1248P4G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.2 3 1. 25.8 2.6 15.4 1.2 5 48 VV PWM デューティ 1% 5% % 1.2 3 1. 25.8 2.6 15.4 1.2 5 PWM PWM duty デューティ cycle 1% 6 V 48 V 4.8 V (min -1 ) 6 5 4 3 2 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 165 min -1 51 min -1 1 2 3 4 5 6 5 1 15 2 1 2 3 5 1 15 4 5 6 2 1 (%) 9GV1248P4H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example (inch H2O) 1.2 (Pa) 3 48 48 VV (inch H2O) 1.2 (Pa) 3 PWM PWM duty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 :48 V V PWM PWM frequency: 周波数 :25 khz 25 khz 1..8 2.6.4.2 25 15 1 5 % 5% PWM デューティ 1% 1..8 2.6.4.2 25 15 1 5 6 V 48 V 4.8 V 5 4 3 2 1 165 min -1 46 min -1 17 1 2 3 5 1 15 4 5 6 2 1 2 3 5 1 15 4 5 6 2 1 (%)
Dimensions (unit: mm) (With ribs) 12±.8 14.8±.3 4-ø4.5±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 +3 3 (1) 25.4±.5 (5) (5) Fan 12 mm sq. 14.8±.3 12±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 14.8±.3 4-ø4.5 14.8±.3 4-ø4.5 118 ø127 14.8±.3 118 ø135 14.8±.3 118 118 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 171
Fan 12 12 25 mm San Ace 12 9G type Model 9G1212B41 is not certified. General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 24 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G1212G41.9 1.8 41 3.68 13 12.482 51 9G1212E41 1.2 to 13.8.58 6.96 365 3.25 115 98.394 48 9G1212A41.4 4.8 315 2.83 1 77.39 44 9G1212H41 12 6 to 13.8.31 3.72 285 2.5 88 64.257 4 9G1212F41.19 2.28 225 1.98 7 42.169 35 7 to 13.8 9G1212M41.14 1.68 195 1.66 59 31.124 29 9G1212B41 1.2 to 13.8.6.72 1.88 31 9.6.39 18 9G1224G41.47 11.28 41 3.68 13 12.482 51 9G1224E41 2.4 to 27.6.37 8.88 365 3.25 115 98.394 48 9G1224A41.21 5.4 315 2.83 1 77.39 44-2 to +7 4/6 C 24 9G1224H41 12 to 27.6.17 4.8 285 2.5 88 64.257 4 9G1224F41.1 2.4 225 1.98 7 42.169 35 2.4 to 27.6 9G1224M41.8 1.92 195 1.66 59 31.124 29 9G1248G41.23 11.4 41 3.68 13 12.482 51 9G1248E41.16 7.68 365 3.25 115 98.394 48 9G1248A41.13 6.24 315 2.83 1 77.39 44 48 4.8 to 55.2 9G1248H41.1 4.8 285 2.5 88 64.257 4 9G1248F41.6 2.88 225 1.98 7 42.169 35 9G1248M41.5 2.4 195 1.66 59 31.124 29 Other sensor specifications are available as options. Refer to the index (pp. 549 to 551). Airflow - Static Pressure Characteristics 9G1212G41 With pulse sensor 9G1212E41 With pulse sensor 9G1212A41 With pulse sensor.6 14.5 12.4 1 8.3 6.2 4.1 2 1.2 V.5 12.4 1 8.3 6.2 4.1 2 1.2 V.4 1 8.3 6.2 4.1 2 1.2 V 1 2 3 4 1 2 3 4 1 2 3 4 2 4 6 8 1 12 14 2 4 6 8 1 12 14 2 4 6 8 1 12 14 172
Airflow - Static Pressure Characteristics 9G1212H41 With pulse sensor 9G1212F41 With pulse sensor 9G1212M41 With pulse sensor.3.2.1 8 6 4 2 6 V 1 2 3 2 4 6 8 1.24.22.2.18.16.14.12.1.8.6.4.2 6 5 4 3 2 1 7 V.5 1. 1.5 2. 2.5 1 2 3 4 5 6 7 8 9.16.14.12.1.8.6.4.2 4 3 2 1 7 V.5 1. 1.5 2. 1 2 3 4 5 6 7 Fan 12 mm sq. 9G1212B41 With pulse sensor 9G1224G41 With pulse sensor 9G1224E41 With pulse sensor.5.4.3.2.1 14 12 1 8 6 1.2 V 4 2.4.8 1.2 1 2 3 4.6 14.5 12.4 1 8.3 6.2 4.1 2 2.4 V 1 2 3 4 2 4 6 8 1 12 14.5 12.4 1 8.3 6.2 4.1 2 2.4 V 1 2 3 4 2 4 6 8 1 12 14 9G1224A41 With pulse sensor 9G1224H41 With pulse sensor 9G1224F41 With pulse sensor.4 1 8.3 6.2 4.1 2 2.4 V 1 2 3 4 2 4 6 8 1 12 14.3.2.1 8 6 4 2 1 2 3 2 4 6 8 1.24.22.2.18.16.14.12.1.8.6.4.2 6 5 4 3 2 1 2.4 V.5 1. 1.5 2. 2.5 1 2 3 4 5 6 7 8 9 9G1224M41 With pulse sensor 9G1248G41 With pulse sensor 9G1248E41 With pulse sensor.16 4.14.12 3.1.8 2.6.4 1.2 2.4 V.5 1. 1.5 2. 1 2 3 4 5 6 7.6 14.5 12.4 1 8.3 6.2 4.1 2 55.2 V 48 V 4.8 V 1 2 3 4 2 4 6 8 1 12 14.5 12.4 1 8.3 6.2 4.1 2 55.2 V 48 V 4.8 V 1 2 3 4 2 4 6 8 1 12 14 173
Airflow - Static Pressure Characteristics 9G1248A41 With pulse sensor 9G1248H41 With pulse sensor 9G1248F41 With pulse sensor.4 1 8.3 6.2 4.1 2 55.2 V 48 V 4.8 V 1 2 3 4 2 4 6 8 1 12 14 8.3 6.2 4.1 2 55.2 V 48 V 4.8 V 1 2 3 2 4 6 8 1.24.22.2.18.16.14.12.1.8.6.4.2 6 5 4 3 2 1 55.2 V 48 V 4.8 V.5 1. 1.5 2. 2.5 1 2 3 4 5 6 7 8 9 9G1248M41 With pulse sensor.16 4.14.12 3.1.8 2.6.4 1.2 55.2 V 48 V 4.8 V.5 1. 1.5 2. 1 2 3 4 5 6 7 Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 取付用穴 Mounting hole 119±.5 14.8±.3 +3 3 リード線 Lead wire AWG24 UL 17 (1) 14.8±.3 119±.5 (5) (5) +1 25 Rotating 回転方向 direction Airflow 風吹出方向 direction 174
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 117 14.8±.3 4-ø4.5 ø126 14.8±.3 117 14.8±.3 4-ø4.5 ø134 14.8±.3 Fan 12 mm sq. 117 117 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 175
Fan 12 12 38 mm San Ace 12 9HV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 46 g Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 2.4 57.6 96 7. 247 95 3.82 71 9HV1224P1A1 24 21.6 to 26.4.37 8.88 38 2.7 95 161.65 46 1 2. 96 115 8.3 293 13 5.22 75 4/6 C 9HV1248P1G1-2 to +7.23 11 38 2.7 95 161.65 46 (7/4 C) 48 36 to 6 1 1.4 67 1 7.2 254 15 4.22 72 9HV1248P1H1.23 11 38 2.7 95 161.65 46 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV1224P1A1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12 4 1 8 3 6 2 4 1 2 V PWM デューティ 1% 5% % 4 3 2 1 12 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V (min -1 ) 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 38 min -1 96 min -1 1 2 3 4 5 6 7 8 5 1 15 2 25 1 2 3 4 5 6 7 5 1 15 2 25 8 1 (%) 176
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV1248P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 5 4 3 2 1 14 12 1 8 6 4 2 % 48 VV PWM デューティ 1% 5% 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3 5 4 3 2 1 14 12 1 8 6 4 2 PWM PWM duty デューティ cycle 1% 1% 48 V 6 V 36 V 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3 (min -1 ) 12 1 8 6 4 2 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 115 min -1 38 min -1 1 (%) Fan 12 mm sq. 9HV1248P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12 4 1 8 3 6 2 4 1 2 48 VV PWM デューティ 1% 5% % 12 4 1 8 3 6 2 4 1 2 PWM PWMduty デューティ cycle 1% 6 V 36 V 48 V Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz (min -1 ) 1 1 min -1 8 6 4 38 min -1 2 1 2 3 4 5 6 7 8 5 1 15 2 25 1 2 3 4 5 6 7 8 5 1 15 2 25 1 (%) Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 12±.8 14.8±.3 +3 3 14.8±.3 12±.8 (1) Lead リード線 wire AWG24 UL 143 6.5±.3 3.5±.3 38±.5 6.5±.3 3.5±.3 Rotating 回転方向 direction AWG22 UL 3266 ((Model 型番 :9HV1224P1A1 no.: のみ only) ) Airflow 風吹出方向 direction 177
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 14.8±.3 4-ø4.5 117 ø13 14.8±.3 117 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 178
Fan 12 12 38 mm San Ace 12 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 36 g Fan 12 mm sq. Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 3. 36. 64 6.35 224. 36. 1.45 64 9GV1212P1J1.19 2.28 15 1.49 52.6 19.8.8 33 12 1.2 to 13.8 1 2.1 25.2 55 5.45 192.6 265 1.6 6 9GV1212P1G1.19 2.28 15 1.49 52.6 19.8.8 33-2 to +7 4/6 C 9GV1224P1J1** 1 1.5 36. 64 6.35 224. 36 1.45 64 24 2.4 to 27.6 9GV1224P1H1** 1.8 19.2 52 5.16 182.3 237.95 58 1.75 36. 64 6.35 224. 36. 1.45 64 9GV1248P1J1 48 4.8 to 55.2.6 2.88 15 1.49 52.6 26.1.16 33 * PWM frequency: 25 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 555). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 V PWM デューティ 1% 5% % 1 2 3 4 5 6 7 8 5 1 15 2 25 3 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 PWM PWMduty デューティ cycle 1% 1.2 V 1 2 3 4 5 6 7 8 5 1 15 2 25 3 (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 :V PWM 周波数 frequency: :25 khz 25 khz 15 min -1 1 (%) 64 min -1 179
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1212P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.4 35 V 1.4 35 PWM PWMduty デューティ cycle 1% (min -1 ) 7 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1.2 1..8.6.4.2 3 25 2 15 1 5 % PWM デューティ 1% 5% 1.2 1..8.6.4.2 3 25 2 15 1 5 1.2 V 6 5 4 3 2 1 15 min -1 55 min -1 1 2 3 4 5 6 7 4 8 12 16 2 24 1 2 3 4 5 6 7 4 8 12 16 2 24 1 (%) 9GV1224P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.6 1.4 1.2 1..8.6.4.2 4 35 3 25 2 15 1 5 V PWM デューティ 1% 5% 1.6 4 1.4 35 1.2 3 1. 25.8 2.6.4 15 1.2 5 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 64 min -1 1 2 3 4 5 6 4 8 12 16 2 1 2 3 4 5 6 7 4 8 12 16 2 24 1 (%) 9GV1224P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 1.4 35 V 1.4 35 PWM PWMduty デューティ cycle 1% (min -1 ) 6 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1.2 1..8.6.4.2 3 25 2 15 1 5 PWM デューティ 1% 5% 1.2 1..8.6.4.2 3 25 2 15 1 5 2.4 V 5 4 3 2 1 52 min -1 1 2 3 4 5 6 4 8 12 16 2 1 2 3 4 5 6 4 8 12 16 2 1 (%) 9GV1248P1J1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 18 1.8 1.6 1.4 1.2 1..8.6.4.2 45 4 35 3 25 2 15 1 5 % 1 2 5% 3 48 V V PWM デューティ 1% 4 5 6 7 5 1 15 2 25 3 8 1.8 45 1.6 4 1.4 35 1.2 3 1. 25.8 2.6.4 15 1.2 5 PWM PWMduty デューティ cycle 1% 55.2 V 48 V 4.8 V 1 2 3 4 5 6 7 8 5 1 15 2 25 3 (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 64 min -1 15 min -1 1 (%)
Dimensions (unit: mm) (With ribs) 12±.8 14.8±.3 4-ø4.5±.3 Mounting 取付用穴 hole リード線 Lead wire AWG24 UL 143 +3 3 Fan 12 mm sq. (1) 14.8±.3 12±.8 (5) 38±.5 (5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 14.8±.3 4-ø4.5 14.8±.3 4-ø4.5 118 ø127 14.8±.3 118 ø135 14.8±.3 118 118 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 181
Fan 12 12 38 mm San Ace 12 9G type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 33 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9G1212G11.98 11.76 36 3.88 137 135.542 49 1.2 to 13.8 9G1212E11.61 7.32 31 3.34 118 1.42 46 9G1212H11 12.38 4.56 26 2.8 99 7.4.283 39 9G1212F11 7 to 13.8.28 3.36 228 2.45 87 54.2.218 36 9G1212M11.21 2.52 195 2.1 74 39.6.159 32 9G1224G11.5 12 36 3.88 137 135.542 49 2.4 to 27.6 9G1224E11.34 8.16 31 3.34 118 1.42 46 9G1224H11 24.22 5.28 26 2.8 99 7.4.283 39-2 to +7 4/6 C 9G1224F11 14 to 27.6.16 3.84 228 2.45 87 54.2.218 36 9G1224M11.11 2.64 195 2.1 74 39.6.159 32 9G1248G11.25 12 36 3.88 137 135.542 49 9G1248E11.17 8.16 31 3.34 118 1.42 46 9G1248H11 48 4.8 to 55.2.11 5.28 26 2.8 99 7.4.283 39 9G1248F11.9 4.32 228 2.45 87 54.2.218 36 9G1248M11.7 3.36 195 2.1 74 39.6.159 32 Other sensor specifications are available as options. Refer to the index (pp. 549 to 55). Airflow - Static Pressure Characteristics 9G1212G11 With pulse sensor 9G1212E11 With pulse sensor 9G1212H11 With pulse sensor.7.6.5.4.3.2.1 18 16 14 12 1 1.2 V 8 6 4 2 1 2 3 4 5 6 5 1 15 2.5.4.3.2.1 14 12 1 8 1.2 V 6 4 2 1 2 3 4 5 5 1 15 2 6.35 9.3.25.2 8 7 6 5.15 4 7 V 3.1 2.5 1 1 2 3 4 2 4 6 8 1 12 14 182
Airflow - Static Pressure Characteristics 9G1212F11 With pulse sensor 9G1212M11 With pulse sensor 9G1224G11 With pulse sensor.35.3.25.2.15.1.5 9 8 7 6 5 4 3 7 V 2 1 1 2 3 4 2 4 6 8 1 12 14.25.2.15.1.5 7 6 5 4 3 2 1 7 V 1 2 3 2 4 6 8 1.7.6.5.4.3.2.1 18 16 14 12 1 2.4 V 8 6 4 2 1 2 3 4 5 6 5 1 15 2 Fan 12 mm sq. 9G1224E11 With pulse sensor 9G1224H11 With pulse sensor 9G1224F11 With pulse sensor.5.4.3.2.1 14 12 1 8 2.4 V 6 4 2 1 2 3 4 5 5 1 15 2 6.35 9.3.25.2 8 7 6 5.15 4 14 V 3.1 2.5 1 1 2 3 4 2 4 6 8 1 12 14.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 14 V 1 2 3 4 2 4 6 8 1 12 14 9G1224M11 With pulse sensor 9G1248G11 With pulse sensor 9G1248E11 With pulse sensor.25.2.15.1.5 7 6 5 4 14 V 3 2 1 1 2 3 2 4 6 8 1.7.6.5.4.3.2.1 18 16 14 12 1 55.2 V 48 V 4.8 V 8 6 4 2 1 2 3 4 5 6 5 1 15 2.5.4.3.2.1 14 12 1 55.2 V 48 V 8 4.8 V 6 4 2 1 2 3 4 5 5 1 15 2 6 9G1248H11 With pulse sensor 9G1248F11 With pulse sensor 9G1248M11 With pulse sensor.35 9 8.3 7 55.2 V.25 6 48 V.2.15.1.5 5 4 3 2 1 4.8 V 1 2 3 4 2 4 6 8 1 12 14.35.3.25.2.15.1.5 9 8 7 6 5 55.2 V 48 V 4.8 V 4 3 2 1 1 2 3 4 2 4 6 8 1 12 14.25.2.15.1.5 7 6 55.2 V 5 48 V 4 4.8 V 3 2 1 1 2 3 2 4 6 8 1 183
Dimensions (unit: mm) (With ribs) 4-ø4.3±.3 Mounting 取付用穴 hole 119±.8 14.8±.3 (1) +3 3 Lead リード線 wire AWG24 UL 17 14.8±.3 119±.8 (5) 38±.5 (5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø4.5 Outlet side 14.8±.3 4-ø4.5 117 ø126 14.8±.3 117 ø134 14.8±.3 117 117 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 184
Fan 12 12 38 mm San Ace 12 9SG type Model 9SG1224H11 is not certified. General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 4 g Fan 12 mm sq. Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9SG1212G11 12 1.2 to 13.8 4. 48. 6 7.35 26 34 1.37 64 9SG1224G11 2. 48. 6 7.35 26 34 1.37 64 24 2.4 to 27.6 9SG1224H11.46 11. 34 4.2 142 126.51 48 9SG1248G11 48 4.8 to 55.2 1. 48. 6 7.35 26 34 1.37 64 Other sensor specifications are available as options. Refer to the index (p. 558). -2 to +7 4/6 C Airflow - Static Pressure Characteristics 9SG1212G11 With pulse sensor 9SG1224G11 With pulse sensor 9SG1224H11 With pulse sensor 1.75 1.5 1.25 1..75.5.25 45 4 35 3 25 1.2 V 2 15 1 5 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3 1.75 1.5 1.25 1..75.5.25 45 4 35 3 25 2.4 V 2 15 1 5 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3.7.6.5.4.3.2.1 18 16 14 12 1 8 6 4 2 2.4 V 1 2 3 4 5 2 4 6 8 112141618 9SG1248G11 With pulse sensor 1.75 1.5 1.25 1..75.5.25 45 55.2 V 4 35 48 V 3 25 4.8 V 2 15 1 5 1 2 3 4 5 6 7 8 9 5 1 15 2 25 3 185
Dimensions (unit: mm) 8-ø4.3±.3 Mounting 取付用穴 hole Lead リード線 wire AWG24 UL 17 12±.8 14.8±.3 AWG22 UL 143 ((Model 型番 :9SG1212G11 no.: のみ only) ) +3 3 (1) 14.8±.3 12±.8 6.5±.3 6.5±.3 (3.5) (3.5) 38±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 14.8±.3 4-ø4.5 Outlet side 14.8±.3 4-ø4.5 118 ø127 14.8±.3 118 ø135 14.8±.3 118 118 Options Finger guards page: p. 514 Resin finger guards page: p. 52 Model no.: 19-19C, 19-19H, 19-19E, 19-19K Model no.: 19-1G Resin filter kits page: p. 521 Model no.: 19-1F13 (13PPI), 19-1F2 (2PPI), 19-1F3 (3PPI), 19-1F4 (4PPI) 186
Fan 127 127 38 mm San Ace 127 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 35 g Fan 127 mm sq. Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P1312S11 1.3 15.6 33 4.2 148 117.6.472 47 12 1.2 to 13.8 19P1312H11.82 9.84 295 3.8 134 98.394 45 19P1324S11.55 13.2 33 4.2 148 117.6.472 47 24 2.4 to 27.6 19P1324H11.41 9.84 295 3.8 134 98.394 45 19P1348S11.3 14.4 33 4.2 148 117.6.472 47 48 4.8 to 55.2 19P1348H11.2 9.6 295 3.8 134 98.394 45-2 to +6 4/6 C Other sensor specifications are available as options. Refer to the index (pp. 544 to 545). Airflow - Static Pressure Characteristics 19P1312S11 With pulse sensor 19P1312H11 With pulse sensor 19P1324S11 With pulse sensor.6 15.5 12.6 15.5.4.3.2.1 1 5 1.2 V.4.3.2.1 1 8 6 4 2 1.2 V.5.4.3.2.1 1 5 2.4 V 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 2 4 6 8 1 12 14 16 18 5 1 15 2 2 4 6 8 1 12 14 16 18 187
Airflow - Static Pressure Characteristics 19P1324H11 With pulse sensor 19P1348S11 With pulse sensor 19P1348H11 With pulse sensor.5 12.6 15.5 12.4.3.2.1 1 8 6 4 2 2.4 V.5.4.3.2.1 1 5 55.2 V 48 V 4.8 V.4.3.2.1 1 8 6 4 2 55.2 V 48 V 4.8 V 1 2 3 4 5 4-ø4.3±.3 Mounting 取付用穴 hole (1) +3 3 127±.8 113.3±.3 Lead リード線 wire AWG24 UL 17 113.3±.3 127±.8 Rotating 回転方向 direction (6) (6) 38±.5 Airflow 風吹出方向 direction 113.3±.3 4-ø4.3 113.3±.3 4-ø4.3 ø124 113.3±.3 123 ø127.5 113.3±.3 1 2 3 4 5 1 2 3 4 5 5 1 15 2 2 4 6 8 1 12 14 16 18 5 1 15 2 Dimensions (unit: mm) (With ribs) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 123 Options Finger guards page: p. 514 Model no.: 19-722, 19-723 188
Fan 127 127 38 mm San Ace 127 9E type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 4 g Fan 127 mm sq. Specifications The models listed below have pulse sensors. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E1312A11 1.4 16.8 385 4.81 17 155.622 52 12 1.2 to 13.8-2 to +7 6/6 C 19E1312S11 1.2 14.4 345 4.37 154 125.52 49 19E1324G11 1.1 26.4 455 5.66 2 216.867 57-2 to +6 4/6 C 19E1324A11 24 2.4 to 27.6.7 16.8 385 4.81 17 155.622 52-2 to +7 6/6 C 19E1324S11.53 12.7 345 4.37 154 125.52 49 19E1348G11.54 25.9 455 5.66 2 216.867 57-2 to +6 4/6 C 19E1348A11 48 4.8 to 55.2.36 17.3 385 4.81 17 155.622 52-2 to +7 6/6 C 19E1348S11.28 13.4 345 4.37 154 125.52 49 Other sensor specifications are available as options. Refer to the index (p. 542). Airflow - Static Pressure Characteristics 19E1312A11 With pulse sensor 19E1312S11 With pulse sensor 19E1324G11 With pulse sensor.8.7.6.5.4.3.2.1 18 16 14 12 1 1.2 V 8 6 4 2 1 2 3 4 5 6 5 1 15 2 25.7.6.5.4.3.2.1 16 14 12 1 8 1.2 V 6 4 2 1 2 3 4 5 6 5 1 15 2 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 2.4 V 12 1 8 6 4 2 1 2 3 4 5 6 7 5 1 15 2 25 189
Airflow - Static Pressure Characteristics 19E1324A11 With pulse sensor 19E1324S11 With pulse sensor 19E1348G11 With pulse sensor.8.7.6.5.4.3.2.1 18 16 14 12 1 2.4 V 8 6 4 2 1 2 3 4 5 6 5 1 15 2 25.7.6.5.4.3.2.1 16 14 12 1 8 2.4 V 6 4 2 1 2 3 4 5 6 5 1 15 2 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 55.2 V 48 V 4.8 V 12 1 8 6 4 2 1 2 3 4 5 6 7 5 1 15 2 25 19E1348A11 With pulse sensor 19E1348S11 With pulse sensor.8.7 18 16.6 55.2 V 14.5 48 V 12.4.3.2.1 1 8 6 4 2 4.8 V 1 2 3 4 5 6 5 1 15 2 25.7 16.6 14.5 12.4 1.3 8 6.2 4.1 2 55.2 V 48 V 4.8 V 1 2 3 4 5 6 5 1 15 2 Dimensions (unit: mm) 8-ø4.3±.3 Mounting 取付用穴 hole (1) 127±.8 113.3±.3 +3 3 Lead リード線 wire AWG24 UL 17 113.3±.3 127±.8 6±.3 38±.5 6±.3 Rotating 回転方向 direction Airflow 風吹出方向 direction 19
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 113.3±.3 4-ø4.3 113.3±.3 4-ø4.3 ø124 113.3±.3 123 ø13 113.3±.3 Fan 127 mm sq. 123 Options Finger guards page: p. 514 Model no.: 19-722, 19-723 191
Fan 14 14 38 mm San Ace 14 9GV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 63 g Specifications The models listed below have pulse sensors with PWM control function. Model no. 9GV1412P1G1 9GV1412P1S1 9GV1412P1H1 9GV1424P1G1 9GV1424P1S1 9GV1424P1H1 9GV1448P1G1 9GV1448P1S1 9GV1448P1H1 Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 4.6 55.2 76 8.8 31 64 2.57 7 2.26 3.12 23 2.66 93 8.32 39 12 1.8 to 13.2 1 3.1 37.2 665 7.7 272 48 1.93 67 2.26 3.12 23 2.66 93 8.32 39 1 1.7 2.4 52 6. 212 3 1.2 62 2.26 3.12 23 2.66 93 8.32 39 1 2.3 55.2 76 8.8 31 64 2.57 7 2.13 3.12 23 2.66 93 8.32 39 24 21.6 to 26.4 1 1.55 37.2 665 7.7 272 48 1.93 67 2.13 3.12 23 2.66 93 8.32 39-2 to +7 4/6 C 1.85 2.4 52 6. 212 3 1.2 62 2.13 3.12 23 2.66 93 8.32 39 1 1.15 55.2 76 8.8 31 64 2.57 7 2.11 5.28 23 2.66 93 8.32 39 48 36 to 6 1.78 37.44 665 7.7 272 48 1.93 67 2.11 5.28 23 2.66 93 8.32 39 1.42 2.16 52 6. 212 3 1.2 62 2.11 5.28 23 2.66 93 8.32 39 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1412P1G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 V 2.5 6 PWM デューティ 1% 2. 5 1.5 4 3 1. 2.5 1 2% 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 Voltage: 電圧 : V (Pa) (min -1 ) PWM PWMduty デューティ cycle 1% PWM 周波数 frequency: :25 khz 25 khz 3.5 9 8 13.2 V 76 min -1 8 7 3. 7 6 2.5 6 1.8 V 5 2. 5 4 1.5 4 3 3 1. 2 2.5 1 1 (inch H2O) 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 1 (%) 192
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1412P1S1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 2. 1.5 1..5 2.5 2. 1.5 1..5 6 5 4 3 2 1 1.25 1..75.5.25 7 6 5 4 3 2 1 2. 1.5 1..5 PWM デューティ 1% 2% 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 35 3 25 2 15 1 5 2% V V PWM デューティ 1% 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 6 5 4 3 2 1 PWM デューティ 1% 2% PWM デューティ 1% 2% V 1 2 3 4 5 6 7 4 8 12 16 2 24 V 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 9GV1412P1H1 With pulse sensor with PWM control function PWM 9GV1424P1G1 With pulse sensor with PWM control function PWM 9GV1424P1S1 With pulse sensor with PWM control function PWM 2.5 2. 1.5 1..5 3.5 3. 2.5 2. 1.5 1..5 9 8 7 6 5 4 3 2 1 2.5 2. 1.5 1..5 7 6 5 4 3 2 1 7 6 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 1.25 1..75.5.25 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 13.2 V 1.8 V 1 2 3 4 5 6 7 4 8 12 16 2 24 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 (min -1 ) 8 7 6 5 4 3 2 1 1 (min -1 ) 8 7 6 5 4 3 2 1 (min -1 ) 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 1 665 min -1 PWM duty - Speed characteristics example (%) 52 min -1 PWM duty - Speed characteristics example (%) 76 min -1 PWM duty - Speed characteristics example (%) 665 min -1 (%) 193 Fan 14 mm sq.
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV1424P1H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 静圧 Static 静圧 Static pressure pressure 194 1.25 1..75.5.25 2.5 2. 1.5 1..5 7 6 5 4 3 2 1 2. 1.5 1..5 2% 48 VV PWM デューティ 1% 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 6 5 4 3 2 1 1.25 1..75.5.25 35 3 25 2 15 1 5 PWM デューティ 1% 2% 48 VV 1 2 3 4 5 6 7 8 9 4 8 12 16 2 24 28 32 35 3 25 2 15 1 5 PWM デューティ 1% 2% PWM デューティ 1% 2% V 1 2 3 4 5 6 7 4 8 12 16 2 24 48 VV 1 2 3 4 5 6 7 4 8 12 16 2 24 9GV1448P1G1 With pulse sensor with PWM control function PWM 9GV1448P1S1 With pulse sensor with PWM control function PWM 9GV1448P1H1 With pulse sensor with PWM control function PWM Voltage: 電圧 :48 V V (Pa) (min -1 ) PWM PWMduty デューティ cycle 1% PWM 周波数 frequency: :25 khz 25 khz 3.5 9 8 76 min -1 8 6 V 7 3. 7 48 V 6 2.5 6 5 2. 5 36 V 4 1.5 4 3 3 1. 2 2.5 1 1 1 2 3 4 5 6 7 8 9 1 (%) 4 8 12 16 2 24 28 32 (inch H2O) 1.25 1..75.5.25 2.5 2. 1.5 1..5 5 4 3 2 1 7 6 5 4 3 2 1 1.25 1..75.5.25 PWM PWMduty デューティ cycle 1% 26.4 V 21.6 V 1 2 3 4 5 6 7 4 8 12 16 2 24 PWM PWMduty デューティ cycle 1% 6 V 48 V 36 V 1 2 3 4 5 6 7 8 9 5 4 3 2 1 4 8 12 16 2 24 28 32 PWM PWMduty デューティ cycle 1% 6 V 48 V 36 V 1 2 3 4 5 6 7 4 8 12 16 2 24 (min -1 ) 8 7 6 5 4 3 2 1 1 (min -1 ) 8 7 6 5 4 3 2 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 1 (min -1 ) 8 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 1 52 min -1 PWM duty - Speed characteristics example PWM duty - Speed characteristics example (%) 665 min -1 PWM duty - Speed characteristics example (%) 52 min -1 (%)
Dimensions (unit: mm) 14±.8 124.5±.5 8-ø4.5±.3 Mounting 取付用穴 hole 124.5±.5 14±.8 +3 3 (1) Lead リード線 wire Rated 定格電圧 voltage 12 ファン V fan AWG2 UL 3266 Rated 定格電圧 voltage /48 /48 V ファン V fan AWG22 UL 3266 4±.2 4±.2 6±.4 6±.4 38±.5 Fan 14 mm sq. Rotating 回転方向 direction Airflow 風吹出方向 direction 124.5±.3 4-ø4.5 124.5±.3 4-ø4.5 ø147 ø15 138 124.5±.3 138 124.5±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 138 138 Options Finger guards page: p. 514 Model no.: 19-719, 19-719H 195
Fan 14 14 38 mm San Ace 14 9P type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19P1412H11.73 8.76 26 4.5 159 94.378 46 12 1.2 to 13.8 19P1412M11.33 3.96 19 3.3 117 52.29 38 19P1424H11.37 8.88 26 4.5 159 94.378 46 24 2.4 to 27.6 19P1424M11.16 3.84 19 3.3 117 52.29 38 19P1448H11.2 9.6 26 4.5 159 94.378 46 48 4.8 to 55.2 19P1448M11.9 4.32 19 3.3 117 52.29 38-2 to +7 4/6 C Other sensor specifications are available as options. Refer to the index (p. 545). Airflow - Static Pressure Characteristics 19P1412H11 With pulse sensor 19P1412M11 With pulse sensor 19P1424H11 With pulse sensor.6 15.4 1.6 15.5.4.3.2.1 1 5 1.2 V.3.2.1 5 1.2 V.5.4.3.2.1 1 5 2.4 V 1 2 3 4 5 6 1 2 3 4 5 1 2 3 4 5 6 5 1 15 2 5 1 15 2 5 1 15 2 196
Airflow - Static Pressure Characteristics 19P1424M11 With pulse sensor 19P1448H11 With pulse sensor 19P1448M11 With pulse sensor.4.3.2.1 1 5 2.4 V.6.5.4.3.2.1 15 1 5 55.2 V 48 V 4.8 V.4.3.2.1 1 5 55.2 V 1 2 3 4 5 6 4-ø4.3±.3 Mounting 取付用穴 hole (1) 38±.5 14±.8 124.5±.5 +3 3 Lead リード線 wire AWG24 UL 17 124.5±.5 14±.8 (5) (5) Rotating 回転方向 direction Airflow 風吹出方向 direction 124.5±.3 4-ø4.5 124.5±.3 4-ø4.5 138 ø146 124.5±.3 138 ø15 124.5±.3 48 V 4.8 V Fan 14 mm sq. 1 2 3 4 5 1 2 3 4 5 5 1 15 2 5 1 15 2 5 1 15 2 Dimensions (unit: mm) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 138 138 Options Finger guards page: p. 514 Model no.: 19-719, 19-719H 197
Fan 15 15 5 mm San Ace 15 9GV type General Specifications Material Frame: Plastic (Flammability: UL 94V-), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 45 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV1512H51 2.9 34.8 39 8.54 3 21.84 61 12 1.2 to 13.8 9GV1512M51 1.2 14.4 3 6.35 224 132.53 53-2 to +7 4/6 C 9GV1524M51 24 2.4 to 27.6.6 14.4 3 6.35 224 132.53 53 Other sensor specifications are available as options. Refer to the index (pp. 555 to 556). Airflow - Static Pressure Characteristics 9GV1512H51 With pulse sensor 9GV1512M51 With pulse sensor 9GV1524M51 With pulse sensor 1.2 3 1. 25.8 2.6 15.4 1.2 5 1.2 V.7 175.6 15.5 125.4 1.3 75.2 5.1 25 1.2 V.7 175.6 15.5 125.4 1.3 75.2 5.1 25 2.4 V 2 4 6 8 1 5 1 15 2 25 3 35 2 4 6 8 5 1 15 2 25 3 5 2 4 6 8 1 15 2 25 3 198
Dimensions (unit: mm) (With ribs) 15±.8 135±.5 4-ø4.5±.3 Mounting 取付用穴 hole (1) +3 3 Lead リード線 wire AWG22 UL 143 Fan 15 mm sq. 135±.5 15±.8 (6.5) 5±.5 (6.5) Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side 4-ø4.5 4-ø4.5 ø162 ø178 148±.5 135±.3 148±.5 135±.3 Outlet side 135±.3 148±.5 135±.3 148±.5 Options Finger guards page: p. 514 Model no.: 19-151, 19-152 199
Fan ø 172 147 25 mm San Ace 172 9E type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 5 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E4712M41 1.3 15.6 28 5.2 183 92.369 51 12 1.2 to 13.8 19E4712L41 1. 12. 25 4.6 162 73.293 48 19E4724H41 1. 24. 34 6.4 226 135.542 57 19E4724F41.79 19. 31 5.8 24 112.45 54 24 2.4 to 27.6 19E4724M41.58 13.9 28 5.2 183 92.369 51 19E4724L41.44 1.6 25 4.6 162 73.293 48-2 to +6 4/6 C 19E4748S41.62 29.8 365 6.8 24 156.627 58 19E4748H41.52 25. 34 6.4 226 135.542 57 19E4748F41 48 4.8 to 55.2.4 19.2 31 5.8 24 112.45 54 19E4748M41.32 15.4 28 5.2 183 92.369 51 19E4748L41.25 12. 25 4.6 162 73.293 48 Other sensor specifications are available as options. Refer to the index (pp. 542 to 543). Airflow - Static Pressure Characteristics 19E4712M41 With pulse sensor 19E4712L41 With pulse sensor 19E4724H41 With pulse sensor.45.4 12 11 1.35 9 8.3 7 1.2 V.25 6.2.15 5 4 3.1 2.5 1 1 2 3 4 5 6 5 1 15 2.4.35.3.25.2.15.1.5 1 9 8 7 6 5 1.2 V 4 3 2 1 1 2 3 4 5 6 5 1 15 2.7.6.5.4.3.2.1 2 15 1 2.4 V 5 1 2 3 4 5 6 7 8 5 1 15 2 25 3 2
Airflow - Static Pressure Characteristics 19E4724F41 With pulse sensor 19E4724M41 With pulse sensor 19E4724L41 With pulse sensor.6.5.4.3.2.1 15 1 5 2.4 V 1 2 3 4 5 6 7 5 1 15 2 25.45.4 12 11 1.35 9 8.3 7 2.4 V.25 6.2.15 5 4 3.1 2.5 1 1 2 3 4 5 6 5 1 15 2.4.35.3.25.2.15.1.5 1 9 8 7 6 5 2.4 V 4 3 2 1 1 2 3 4 5 6 5 1 15 2 Fan ø 172 mm 19E4748S41 With pulse sensor 19E4748H41 With pulse sensor 19E4748F41 With pulse sensor.8.7.6.5.4.3.2.1 2 15 1 5 55.2 V 48 V 4.8 V 1 2 3 4 5 6 7 8 5 1 15 2 25 3.7.6.5.4.3.2.1 2 15 55.2 V 48 V 1 4.8 V 5 1 2 3 4 5 6 7 8 5 1 15 2 25 3.6 15.5 55.2 V 48 V.4 1 4.8 V.3.2 5.1 1 2 3 4 5 6 7 5 1 15 2 25 19E4748M41 With pulse sensor 19E4748L41 With pulse sensor.45.4 12 11 1 55.2 V.35 9 48 V 8.3 7 4.8 V.25 6.2.15 5 4 3.1 2.5 1 1 2 3 4 5 6 5 1 15 2.4.35.3.25.2.15.1.5 1 9 8 55.2 V 7 6 48 V 5 4.8 V 4 3 2 1 1 2 3 4 5 6 5 1 15 2 21
Dimensions (unit: mm) 8-ø4.5±.4 Mounting 取付用穴 hole +5 3 ø172±.8 ø162±.5 (1) Lead リード線 wire AWG24 UL 17 55 147±.8 55 7.5±.4 7.5±.4 25.4±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 8.5 4-ø4.5 162±.5 4-R4.25 ø168 55 147 55 Options Finger guards page: p. 515 Model no.: 19-319E, 19-319H, 19-32 22
Fan ø 172 15 51 mm San Ace 172 9HV type General Specifications Sidecut type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 8 g Fan ø 172 mm Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 5. 12 8 12.3 434 1 4.2 77 9HV5724P5H1 24 16 to 3 2.5 12. 3 4.6 162 175.7 51 4/6 C -2 to +7 1 5. 24 15 16.1 568 16 6.43 83 7/4 C 9HV5748P5G1 48 36 to 72 2.41 19.7 37 5.6 198 25 1.1 57 * PWM frequency: 25 khz. Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV5724P5H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 12 4. 9 3. 6 2. 3 1. V PWM デューティ 1% 5% 2% 12 4. 9 3. 6 2. 3 1. PWM PWMduty デューティ cycle 1% 3 V 16 V (min -1 ) 1 8 6 4 2 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 8 min -1 4 8 12 16 1 2 3 4 5 4 8 12 16 1 2 3 4 5 1 (%) 23
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9HV5748P5G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7. 18 6. 15 48 48 VV PWM デューティ 1% 7. 6. 18 15 PWM PWMduty デューティ cycle 1% 1% 72 V 48 V (min -1 ) 12 1 Voltage: 電圧 :48 V V PWM 周波数 frequency: :25 khz 25 khz 15 min -1 5. 4. 3. 2. 1. 12 9 6 3 5% 2% 5. 4. 3. 2. 1. 8-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162±.5 +3 3 Lead リード線 wire AWG18 UL 143 55.5 15±.8 55.5 7.5±.4 51±.8 7.5±.4 Rotating 回転方向 direction Airflow 風吹出方向 direction 8.5 4-ø4.5 162±.5 12 9 6 3 36 V 8 6 4 2 4 8 12 16 2 1 2 3 4 5 6 7 4 8 12 16 2 1 2 3 4 5 6 7 1 (%) Dimensions (unit: mm) Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side ø168 4-R4.25 55.5 147 55.5 Options Finger guards page: p. 515 Model no.: 19-319J, 19-319E, 19-319H, 19-32 24
Fan ø 172 15 51 mm San Ace 172 9SG type General Specifications Sidecut type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 76 g Fan ø 172 mm Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 1 2.8 67.2 65 11.6 41 54 2.16 71 9SG5724P5H61 24 2.4 to 27.6-2 to +7.18 4.32 13 2.32 81.9 3.12 28 1 2.91 14 86 15.46 546 1 4.2 78 9SG5748P5G1 4/6 C.21 1.1 2 3.59 127 75.1.3 4 48 36 to 72-2 to +6 1 1.62 78 65 11.6 41 77 3.9 71 9SG5748P5H1.21 1.1 2 3.59 127 75.1.3 4 * PWM frequency: 25 khz Other sensor specifications are available as options. Refer to the index (p. 558). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9SG5724P5H61 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1 V PWM デューティ 1% 5% % 2.5 2. 1.5 1..5 7 6 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 2.4 V (min -1 ) 7 6 5 4 3 2 1 Voltage: 電圧 : V PWM 周波数 frequency: :25 khz 25 khz 13 min -1 65 min -1 2 4 6 8 1 12 14 1 2 3 4 5 2 4 6 8 1 12 14 1 2 3 4 5 1 (%) 25
Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9SG5748P5G1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 5. 12 4. 1 8 3. 6 2. 4 1. 2 48 VV PWM デューティ 1% 5% % 5 1 15 2 1 2 3 4 5 6 7 5. 4. 3. 2. 1. 12 1 8 6 4 2 PWM PWMduty デューティ cycle 1% 72 V 48 V 36 V 5 1 15 2 1 2 3 4 5 6 7 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 86 min -1 8 7 6 5 4 3 2 2 min -1 1 1 (%) 9SG5748P5H1 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 3. 2. 1. 9 8 48 VV 7 6 PWM デューティ 1% 5 4 3 5% 2 1 % 5 1 15 1 2 3 4 5 3. 2. 1. 9 8 7 6 5 4 3 2 1 PWM PWMduty デューティ cycle 1% 48 V/72 V 36 V 5 1 15 1 2 3 4 5 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :25 khz 25 khz 9 8 7 65 min -1 6 5 4 3 2 2 min -1 1 1 (%) Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162±.5 +3 3 Lead リード線 wire AWG22 UL 143 55.5 55.5 7.5±.4 7.5±.4 51±.8 15±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction 26
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 162±.5 Inlet side, Outlet side 8.5 4-ø4.5 ø168 Fan ø 172 mm 4-R4.25 55.5 147 55.5 Options Finger guards page: p. 515 Model no.: 19-319J, 19-319E, 19-319H, 19-32 27
Fan ø 172 15 51 mm San Ace 172 9GV type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Mass 8 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9GV5724H51 24 2.4 to 27.6 4. 96 63 11.32 4 69 2.77 74 9GV5748H51 48 4.8 to 55.2 2. 96 63 11.32 4 69 2.77 74 Other sensor specifications are available as options. Refer to the index (p. 556). -2 to +7 4/6 C Airflow - Static Pressure Characteristics 9GV5724H51 With pulse sensor 9GV5748H51 With pulse sensor 3.5 8 3. 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1 2.4 V 3.5 8 3. 7 2.5 6 2. 5 1.5 4 3 1. 2.5 1 55.2 V 48 V 4.8 V 2 4 6 8 1 12 2 4 6 8 1 12 1 2 3 4 5 1 2 3 4 5 Dimensions (unit: mm) 8-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162±.5 +3 3 Lead リード線 wire AWG22 UL 143 55.5 55.5 7.5±.4 51±.8 7.5±.4 28 15±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 162±.5 Inlet side, Outlet side 8.5 4-ø4.5 ø168 4-R4.25 Fan ø 172 mm 55.5 147 55.5 Options Finger guards page: p. 515 Model no.: 19-319J, 19-319E, 19-319H, 19-32 29
Fan ø 172 15 51 mm San Ace 172 9E type Sidecut type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 76 g Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E5712K51 2.9 34.8 41 8.5 3 243..976 6 19E5712Y51 2.3 27.6 38 8 282 21.84 6-2 to +6 19E5712H51 12 1.2 to 13.8 1.2 14.4 35 6.4 226 137.2.551 52 19E5712F51.68 8.16 25 5.1 18 95.38 47-2 to +7 19E5712M51.48 5.76 2 4.2 148 67.6.271 41 19E5724C51 2.3 55.2 48 9.9 35 38. 1.237 66 19E5724K51 1.3 31.2 41 8.5 3 243..976 6 19E5724H51 24 2.4 to 27.6.58 13.92 35 6.4 226 137.2.551 52 4/6 C -2 to +7 19E5724F51.35 8.4 25 5.1 18 95.38 47 19E5724M51.2 4.8 2 4.2 148 67.6.271 41 19E5748C51 1.2 57.6 48 9.9 35 38. 1.237 66 19E5748K51.7 33.6 41 8.5 3 243..976 6-2 to +6 19E5748H51 48 4.8 to 55.2.28 13.44 35 6.4 226 137.2.551 52 19E5748F51.19 9.12 25 5.1 18 95.38 47-2 to +7 19E5748M51.11 5.28 2 4.2 148 67.6.271 41 Other sensor specifications are available as options. Refer to the index (p. 543). Airflow - Static Pressure Characteristics 19E5712K51 With pulse sensor 19E5712Y51 With pulse sensor 19E5712H51 With pulse sensor 1.2 3 1.2 3.8 2 1..8.6.4.2 25 2 15 1 5 1.2 V 1..8.6.4.2 25 2 15 1 5 1.2 V.6.4.2 15 1 5 1.2 V 2 4 6 8 1 2 4 6 8 1 1 2 3 4 5 6 7 8 1 2 3 4 1 2 3 4 5 1 15 2 25 3 21
Airflow - Static Pressure Characteristics 19E5712F51 With pulse sensor 19E5712M51 With pulse sensor 19E5724C51 With pulse sensor.6.5.4.3.2.1 15 1 1.2 V 5 1 2 3 4 5 6 7 5 1 15 2 25.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 1.2 V 1 2 3 4 5 6 5 1 15 2 1.6 1.4 1.2 1..8.6.4.2 4 35 3 25 2.4 V 2 15 1 5 2 4 6 8 1 12 1 2 3 4 Fan ø 172 mm 19E5724K51 With pulse sensor 19E5724H51 With pulse sensor 19E5724F51 With pulse sensor 1.2 3 1. 25.8 2.6 15.4 1.2 5 2.4 V.8 2.6 15.4 1.2 5 2.4 V.6 15.5.4 1.3.2 5.1 2.4 V 2 4 6 8 1 1 2 3 4 1 2 3 4 5 6 7 8 5 1 15 2 25 3 1 2 3 4 5 6 7 5 1 15 2 25 19E5724M51 With pulse sensor 19E5748C51 With pulse sensor 19E5748K51 With pulse sensor.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 2.4 V 1 2 3 4 5 6 5 1 15 2 1.6 1.4 1.2 1..8.6.4.2 4 35 55.2 V 3 48 V 25 4.8 V 2 15 1 5 2 4 6 8 1 12 1 2 3 4 1.2 1..8.6.4.2 3 25 55.2 V 2 48 V 15 4.8 V 1 5 2 4 6 8 1 1 2 3 4 19E5748H51 With pulse sensor 19E5748F51 With pulse sensor 19E5748M51 With pulse sensor.8.6.4.2 2 55.2 V 15 48 V 4.8 V 1 5 1 2 3 4 5 6 7 8 5 1 15 2 25 3.6.5.4.3.2.1 15 55.2 V 48 V 1 4.8 V 5 1 2 3 4 5 6 7 5 1 15 2 25.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 55.2 V 48 V 4.8 V 1 2 3 4 5 6 5 1 15 2 211
Dimensions (unit: mm) 4-ø4.5±.3 Mounting 取付用穴 hole 1 ø172±.8 162±.5 15±.8 +3 3 Lead リード線 wire AWG24 UL 17 または or AWG22 UL 143 7.5±.4 7.5±.4 51±.8 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 148 ø168 162±.3 2-R4.25 8.5 2-ø4.5 Options Finger guards page: p. 515 Model no.: 19-319E, 19-319H, 19-32 212
Fan ø 172 51 mm San Ace 172 9E type General Specifications Round type Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 78 g Fan ø 172 mm Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 19E1712K51 2.9 34.8 41 8.5 3 243..976 55 19E1712Y51 2.3 27.6 38 7.8 276 21..843 53-2 to +6 19E1712H51 12 1.2 to 13.8 1.2 14.4 35 6.4 226 137.2.551 47 19E1712F51.9 1.8 25 5.1 18 95..382 42 19E1712M51.48 5.76 2 4.2 148 67.6.271 36 19E1724C51 2.3 55.2 48 9.9 35 38. 1.237 6 19E1724K51 1.3 31.2 41 8.5 3 243..976 55-2 to +7 19E1724H51 24 2.4 to 27.6.58 13.92 35 6.4 226 137.2.551 47 4/6 C 19E1724F51.35 8.4 25 5.1 18 95.382 42 19E1724M51.2 4.8 2 4.2 148 67.6.271 36 19E1748C51 1.2 57.6 48 9.9 35 38. 1.237 6 19E1748K51.7 33.6 41 8.5 3 243..976 55-2 to +6 19E1748H51 48 4.8 to 55.2.28 13.44 35 6.4 226 137.2.551 47-2 to +7 19E1748F51.19 9.12 25 5.1 18 95.382 42-2 to +6 19E1748M51.11 5.28 2 4.2 148 67.6.271 36-2 to +7 Other sensor specifications are available as options. Refer to the index (p. 542). Airflow - Static Pressure Characteristics 19E1712K51 With pulse sensor 19E1712Y51 With pulse sensor 19E1712H51 With pulse sensor 1.2 3 1.2 3.8 2 1..8.6.4.2 25 2 15 1 5 1.2 V 1..8.6.4.2 25 2 15 1 5 1.2 V.6.4.2 15 1 5 1.2 V 2 4 6 8 1 1 2 3 4 2 4 6 8 1 5 1 15 2 25 3 35 1 2 3 4 5 6 7 8 5 1 15 2 25 3 213
Airflow - Static Pressure Characteristics 19E1712F51 With pulse sensor 19E1712M51 With pulse sensor 19E1724C51 With pulse sensor.6.5.4.3.2.1 15 1 1.2 V 5 1 2 3 4 5 6 7 5 1 15 2 25.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 1.2 V 1 2 3 4 5 6 5 1 15 2 1.6 1.4 1.2 1..8.6.4.2 4 35 3 25 2.4 V 2 15 1 5 2 4 6 8 1 12 1 2 3 4 19E1724K51 With pulse sensor 19E1724H51 With pulse sensor 19E1724F51 With pulse sensor 1.2 3.8 2.6 15 1..8.6.4.2 25 2 15 1 5 2.4 V.6.4.2 15 1 5 2.4 V.5.4.3.2.1 1 5 2.4 V 2 4 6 8 1 1 2 3 4 1 2 3 4 5 6 7 8 5 1 15 2 25 3 1 2 3 4 5 6 7 5 1 15 2 25 19E1724M51 With pulse sensor 19E1748C51 With pulse sensor 19E1748K51 With pulse sensor.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 2.4 V 1 2 3 4 5 6 5 1 15 2 1.6 1.4 1.2 1..8.6.4.2 4 35 55.2 V 3 48 V 25 4.8 V 2 15 1 5 2 4 6 8 1 12 1 2 3 4 1.2 1..8.6.4.2 3 25 55.2 V 2 48 V 15 4.8 V 1 5 2 4 6 8 1 1 2 3 4 19E1748H51 With pulse sensor 19E1748F51 With pulse sensor 19E1748M51 With pulse sensor 214.8.6.4.2 2 55.2 V 15 48 V 4.8 V 1 5 1 2 3 4 5 6 7 8 5 1 15 2 25 3.6.5.4.3.2.1 15 55.2 V 1 48 V 4.8 V 5 1 2 3 4 5 6 7 5 1 15 2 25.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 55.2 V 48 V 4.8 V 1 2 3 4 5 6 5 1 15 2
Dimensions (unit: mm) ø172±.8 162±.5 162±.5 8-ø4.5±.3 Mounting 取付用穴 hole +3 3 (1) Lead リード線 wire AWG24 UL 17 または or AWG22 UL 143 7.5±.4 51±.8 7.5±.4 Fan ø 172 mm Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 162±.3 162±.3 ø168 4-R4.25 8.5 4-ø4.5 Options Finger guards page: p. 515 Model no.: 19-166, 19-168, 19-319E, 19-319H, 19-32 215
Fan ø 2 7 mm San Ace 2 9GV type General Specifications Material Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black Sensor Yellow Control Brown Mass 18 g Power on when current is shut off. Do not power on 15 s or more after power off. Specifications The models listed below have pulse sensors with PWM control function. Rated voltage PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. [V] [V] cycle* [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 4/6 C 9GV248PG21** 48 36 to 72 1 12.5 6 8 31.5 1112 14 5.62 81-2 to +7 (7/4 C) * PWM frequency: 1 khz ** Fan does not rotate when PWM is %. Other sensor specifications are available as options. Refer to the index (p. 556). Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GV248PG21 With pulse sensor with PWM control function PWM PWM duty - Speed characteristics example 16 6. 5.5 14 5. 4.5 12 4. 1 3.5 3. 8 2.5 6 2. 1.5 4 1..5 2 2% 48 VV PWM デューティ 1% 5% 1 2 3 4 4 8 1,2 6. 5.5 5. 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 16 14 12 1 8 6 4 2 1 PWM PWMduty デューティ cycle 1% 48 V 72 V 36 V 2 3 4 4 8 1,2 Voltage: 電圧 :48 V V (min -1 ) PWM 周波数 frequency: :1 khz 1 khz 9 8 8 min -1 7 6 5 4 3 2 1 1 (%) 216
Dimensions (unit: mm) 22±1 28±.5 188.4±.5 4-ø4.3±.15 4-ø4.5±.2 Depth 深さ 1 1 33±3 (1) リード線 Lead wire AWG14 UL 115 ø2±.5 ø2±.5 4-ø4.3±.15 Fan ø 2 mm 188.4±.5 28±.5 22±1 12±.4 12±.4 7±.5 Rotating 回転方向 direction Airflow 風吹出方向 direction Inlet side, Outlet side ø28±.3 4-ø4.5 ø28±.3 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) ø194 Options Finger guards page: p. 516 Model no.: 19-112, 19-113 217
Fan ø 2 7 mm San Ace 2 9EC type Model 9EC248J1 is not certified. General Specifications Material Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L1 life: 9% survival rate for continuous operation in free air at 6 C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength 5/6 Hz, 5 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 1 MΩ or more with a 5 V megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -3 to +7 C (Non-condensing) Lead wire Red Black or Blue Sensor Yellow Mass 18 g Power on when current is shut off. Do not power on 1 s or more after power off. Specifications The models listed below have pulse sensors. Model no. Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 9EC224H1 24 2.4 to 26.4 2. 48. 36 11. 388 36 1.446 6 9EC248J1 4.8 to 55.2 4.4 211.2 61 18.3 646 1 4.16 75 9EC248A1 48 43. to 51. 2.2 15.6 48 14.7 519 64 2.57 68 9EC248H1 4.8 to 52.8 1.2 57.6 36 11. 388 36 1.446 6 Other sensor specifications are available as options. Refer to the index (p. 548). -2 to +6 4/6 C Airflow - Static Pressure Characteristics 9EC224H1 With pulse sensor 9EC248J1 With pulse sensor 9EC248A1 With pulse sensor 2. 1.5 1..5 5 4 26.4 V 3 2.4 V 2 1 2 4 6 8 1 12 1 2 3 4 5 9EC248H1 With pulse sensor 2. 5 52.8 V 4 1.5 48 V 3 4.8 V 1. 2.5 1 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 11 1 9 8 7 6 5 4 3 2 1 55.2 V 48 V 4.8 V 2 4 6 8 1 12 14 16 18 2 1 2 3 4 5 6 7 3. 2.5 2. 1.5 1..5 8 7 6 5 4 3 2 1 51 V 48 V 43 V 2 4 6 8 1 12 14 16 1 2 3 4 5 6 218 2 4 6 8 1 12 1 2 3 4 5
Dimensions (unit: mm) 22±1 28±.5 188.4 33±2 (1) リード線 Lead wire AWG22 UL 17 ø2-1 8-ø4.3±.15 Mounting 皿取付穴内径 hole flat head screw 8-ø4.5±.3 Mounting 取付用穴 hole Fan ø 2 mm ø2-1 188.4 28±.5 22±1 12±.4 7-1 13±.4 Rotating 回転方向 direction Airflow 風吹出方向 direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 28 188.4 ø194 28 188.4 4-ø4.5 4-ø4.5 8-R2 4-R5 Options Finger guards page: p. 516 Model no.: 19-72, 19-72H, 19-721, 19-721H 219
Finger guards Dimensions (unit: mm) AC 36 mm sq. type 38 mm sq. type 4 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-15 Nickel-chrome plating (silver) 4 19-165 Nickel-chrome plating (silver) 5 19-59 Nickel-chrome plating (silver) 7 19-59H Cation electropainting (black) Inlet side, Outlet side Inlet side, Outlet side Inlet side, Outlet side 29.5±.5 +.3 4-ø4 4.8 ø1.6 +1 3±.5 4-ø4±.3 ø1.6 4.8±.5 ø1.6 3.5±.3 ø1.6 ø29.5 4 +1 ø1.6 29.5±.5 ø15 ø26 32 3±.5 ø1.6 ø28.5 ø17.5 34 49 +1.5 -.5 ø18.3 38.5 ø45.3 52 mm sq. type 6 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-149 Nickel-chrome plating (silver) 7 19-149E Nickel-chrome plating (silver) 9 19-139E Nickel-chrome plating (silver) 14.5 19-139H Cation electropainting (black) Outlet side Inlet side, Outlet side Inlet side, Outlet side ø43.8 3.7±.3 ø1.6 ø1.6 4 +1 ø1.6 3.7±.3 ø1.6 ø43.8 4 +1 ø53 4.3±.3 ø1.6 ø1.6 4 +1 63.2 +1.5 -.5 ø32.6 53.3 63.2 +1.5 -.5 53.3 75 +1.5 -.5 62 ø59.4 ø59.4 ø7.7 7 mm sq. type 8 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-1128 Nickel-chrome plating (silver) 17 19-49C Nickel-chrome plating (silver) 17 19-49E Nickel-chrome plating (silver) 21 19-49H Cation electropainting (black) Inlet side, Outlet side Outlet side Inlet side, Outlet side ø63.2 4.3±.3 ø1.6 ø1.6 ø16 5 +1 4.3±.3 5 +1 4.3±.3 ø1.6 ø1.6 ø75 ø1.6 91 +1.5 -.5 (ø87) 78 15 +1.5 -.5 ø11.2 ø75 5 +1 ø1.6 ø39.6 88 15 +1.5 -.5 ø11.2 88 4.3±.3 ø1.6 ø1.6 12.5 +1.5 -.5 ø116.6 ø39.8 ø87 5 +1 3.5±.5 4.3±.3 3.5±.3 ø1.6 (ø85) ø77.6 ø1.6 ø1.6 ø1.6 ø87 5 +1 99 ø18.6 3.5±.5 88.8±.5 75 12.5 +1.5 -.5 99 Option 92 mm sq. type ø 92 mm type 92 mm sq., ø 1 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-99C Nickel-chrome plating (silver) 22 19-1147 Nickel-chrome plating (silver) 23 19-99E Nickel-chrome plating (silver) 29 19-99H Cation electropainting (black) Outlet side Impeller side, Nameplate side Inlet side, Outlet side ø1.6 +1 4 ø116.6 ø16.2 513
Options Finger guards Dimensions (unit: mm) AC 12 mm sq. type 127 mm sq., ø 175 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-19C Nickel-chrome plating (silver) 19-19E Nickel-chrome plating (silver) 19-722 Nickel-chrome plating (silver) 43 32 42 19-19H Cation electropainting (black) 19-19K Cation electropainting (black) 4.3±.3 ø42.2 ø148 Outlet side Inlet side, Outlet side Inlet side, Outlet side 152.5 +1.5 -.5 ø1.6 ø1.6 ø113 13 5 +1 152.5±.5 ø1.6 ø1.6 ø148 ø113 4.3±.3 ø18.6 5 +1 13 165±.5 ø1.6 ø1.6 ø16.5 ø119 +.4 -.2 4.3 ø24.6 142 5-1 127 mm sq. type ø 133 mm type ø 136 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-723 Nickel-chrome plating (silver) 34 19-1112 Nickel-chrome plating (silver) 65 19-1139 Nickel-chrome plating (silver) 41 Outlet side Inlet side Impeller side, Nameplate side 165±.5 4.3±.2 ø1.6 ø1.6 ø119 (ø6) 3.2-1 123.1±1 ø118 4.3±.3 ø1.6 ø1.6 ø16 ø87 3.2±1 133±2 ø1.6 ø1.6 ø18.4 3.5±.3 ø16 12 ø16.5 (ø128) 5 +1 14 mm sq. type 15 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-719 Nickel-chrome plating (silver) 19-151 Nickel-chrome plating (silver) 63 19-152 Nickel-chrome plating (silver) 53 51 19-719H Cation electropainting (black) Inlet side, Outlet side Inlet side, Outlet side Outlet side ø186 +.5-1 ø176 4.3 +.4 -.2 5.5-1 ø21 +.5-1 ø19.9 4.3 +.4 -.2 5.5-1 ø19.9 3.2-1 4-12 4-4.5 ø1.6 ø26.8 ø136.2 ø145 ø1.6 ø26.8 ø143.8 4-12 4-4.5 ø156 4.3±.2 ø1.6 ø143.8 (ø62.2) 197.7±.5 ø1.6 ø1.6 ø1.6 ø 15 mm type 16 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-114 Nickel-chrome plating (silver) 19-619E Nickel-chrome plating (silver) 19-62 Nickel-chrome plating (silver) 74 31 85 19-114H Cation electropainting (black) 19-619H Cation electropainting (black) ø136.2 ø1.6 ø128.7 Inlet side 5.5-1 +2-1 +.4 +.4 8-1.5 5.5 -.2 -.2 4.3 ø159.7 ø26.3 ø25.2 ø195.9 +.5-1 Inlet side, Outlet side ø1.8 ø159.7 ø25.2 +.5 ø195.9-1 ø1.8 Outlet side +.4 5.5 -.2 3.6-1.5 ø97.6 ø111.5 ø1.8 ø184 ø1.8 ø61.7 ø1.6 514
Finger guards Dimensions (unit: mm) AC ø 172 mm Sidecut type Model no. Surface treatment Mass (g) Applicable model no. Finger guard 19-319J should be mounted with four holes 9SG57 P5 /9GV57 H51 as in the drawing. 19-319J Nickel-chrome plating (silver) 65 9CR5748P9G1/9WG5748P5 1 Hexagonal nuts +.5 ø172-1 +.4 -.2 ø1.6 ø147 Inlet side, Outlet side ø162 4.3 ø1.6 5.5-1 Finger guards Plain washers Spring washers Screws ø152 Fan 55.5 71.3±1 71.3±1 ø 172 mm Sidecut, Round type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Finger guards 19-319E, 19-319H, and 19-32 19-319E Nickel-chrome plating (silver) 19-32 Nickel-chrome plating (silver) 53 should be mounted with two holes as in the 69 19-319H Cation electropainting (black) drawing and do not use any other holes. Inlet side, Outlet side Outlet side ø148 ø172-1 +.5 ø162 +.4 4.3 -.2 ø1.6 ø1.6 9.5-1 4.3 +.4 -.2 3.2-1 ø1.6 ø1.6 ø62.2 Finger guards Plain washers Hexagonal nuts Spring washers ø152 Screws ø148 ø172 +.5-1 ø162 Fan ø 172 mm Round type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-166 Nickel-chrome plating (silver) 61 19-168 Nickel-chrome plating (silver) 54 ø172 ø1.6 ø148 ø162 +.5-1 4.3 ø1.6 +.4 -.2 ø162 +.4 4.3 9.5-1 +.5 ø172-1 ø1.6 ø1.6 ø62.2 ø148 -.2-1 3.2 ø152 Option Inlet side, Outlet side Outlet side 515
Options Finger guards Dimensions (unit: mm) AC ø 2 mm type Model no. Surface treatment Mass (g) Applicable model no. Model no. Surface treatment Mass (g) Applicable model no. 19-112 Nickel-chrome plating (silver) 1 9GV248PG21 19-113 Nickel-chrome plating (silver) 8 9GV248PG21 Inlet side, Outlet side Outlet side +1 199 -.5 ø1.6 ø182.8 ø28 ø1.6 4.3 A +.4 -.2 B + 9.5-1 + 9.5-1 ø2-1 ø1.6 ø189.8 ø28 ø1.6 +.4 4.3 -.2 + 3.2-1 +1 214.1 -.5 (196.3) (ø92.2) +1 214.1 -.5 B A Section 断面 AA AA Section 断面 BB BB ø 2 mm type Model no. Surface treatment Mass (g) Applicable model no. Model no. Surface treatment Mass (g) Applicable model no. 19-72 Nickel-chrome plating (silver) 19E224 19-721 Nickel-chrome plating (silver) 19E224 84 66 19-72H Cation electropainting (black) 9EC2 1 19-721H Cation electropainting (black) 9EC2 1 Inlet side, Outlet side Outlet side ø171 ø188.4 +.4 -.2 4.3 ø1.6 8-1 ø178 ø188.4 +.4 4.3 -.2 ø1.6 3.2-1 ø1.6 ø1.6 194.5 +1 -.5 ø178 194.5 +1 -.5 ø 221 mm type ø 225 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-1138 Nickel-chrome plating (silver) 19-1137 Nickel-chrome plating (silver) 15 94 19-1138H Cation electropainting (black) 19-1137H Cation electropainting (black) Inlet side Inlet side 25.9±1.5 ø26.8 ø192 ø245 +.4 4.3 -.2 ø1.6 ø1.6 25.8 +1 -.5 21.6±1.5 ø1.6 ø1.6 ø26.8 194.4±1 ø18.2 ø213.3 4.3±.3 A ø1.6 ø186.9 B 217.6±1 ø194.1 ø1.6 5.5-1 B A 5±.5 Section 断面 AA AA 3.2 + -1 Section 断面 BB BB 516
Finger guards Dimensions (unit: mm) AC 27 mm sq. type (for Bracket-mounted Centrifugal Fan) Model no. Surface treatment Mass (g) Finger guard 19-1146 should be mounted with four holes as in the 19-1146 Nickel-chrome plating (silver) 16 drawing. Inlet side ø1.6 ø1.6 194.4±1 ø26.8 ø18.2 5.3±.3 ø2 A ø35.7 ø186.9 B Finger フィンガーガード guard Screws ネジ B 311±1 ø194.1 3.6 +.5-1 3.2 + -1 Section 断面 BB A 5±1 Section 断面 AA Fan ファン Mounting example Axial fan Centrifugal fan Hexagonal nuts Finger guard Plain washers Spring washers Screws Inlet nozzle Finger guard Fan Hexagonal nuts Fan Plain washers Spring washers Screws Chassis Option 517
Options Inlet nozzle for centrifugal fan and splash proof centrifugal fan Dimensions (unit: mm) Nozzle mounted in fan inlet side to adjust the flow of introduced air. Material: Steel sheet ø 1 mm type ø 133 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-18 Electro nickel plating (silver) 8 19-169 Electro nickel plating (silver) 76 19-169H Cation electropainting (black) ø116.6±.5 ø129±1 ø118±.5 ø128±1 ø7±.5 ø85±.5 9 ±1 ( 等配 ) 5±1 (1) 9 ±1 ( 等配 ) 13±1 (1) (Each) 4-ø4.3±.5 (R4.8) (Each) 4-ø4.5±.5 ø 15 mm type ø 175 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-181 Electro nickel plating (silver) 19-173 Electro nickel plating (silver) 7 1 19-181H Cation electropainting (black) 19-173H Cation electropainting (black) ø128±.5 ø17±1 ø139±1 ø1±.5 ø126±.5 9 ±1 ( 等配 ) 7±1 (1) ø158±.5 14±1 (1) (Each) 4-ø4.5±.5 (R6) O 9 ±1 ( 等配 ) (Each) 4-ø4.5±.5 (R1) ø 221 mm type ø 225 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-1135 Electro nickel plating (silver) 19-1134 Electro nickel plating (silver) 23 36 19-1135H Cation electropainting (black) 19-1134H Cation electropainting (black) ø252±1 6-ø5.5±.5 45 ±1 6 ±1 (Each) 4-ø4.3±.5 21±1 (.8) 118±1 ø155.2±.5 ø223±1 ø21±.5 29.5±1 (1.5) ø146±.5 ø242±.5 ( 等配 ) ø245±.5 9 ±1 ( (Each) 等配 ) (R22) O 9 ±1 ( 等配 ) (Each) 4-4.5±.5 (R24) 518
EMC guards Dimensions (unit: mm) It is a metallic piece that protects materials from the adverse effects of electromagnetic noise sources. It provides electromagnetic shielding. It is attached to the casing of a device by means of the fan fixing screw (s). Ground the devices equipped with an EMC guard. 8 mm sq. type 8 mm sq. type 92 mm sq. type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-138 Nickel-chrome plating (silver) 14 19-139 Nickel-chrome plating (silver) 1 19-14 Nickel-chrome plating (silver) 15 Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers 19P8* 8 8 2 19P8* 8 8 15 9G9* 92 92 32 9GV8* 8 8 25 9GA8* 8 8 2 9G9* 9GV8* 19R8* 9GV9* 9HV8* 8 8 38 9A8* 8 8 25 9GA9* 9HVA8* 9GA8* 9GA8* 8 8 32 9G8* 9GA8* 8 8 38 Dimensions of fans (mm) 92 92 38 4.3±.3 +1 5 4.3±.3 +1 5 4.3±.3 +1 5 ø1.6 ø1.6 ø1.6 +1.5 15-.5 ø43 88 +1.5 15-.5 ø31 88 +1.5 12.5-.5 ø43 99 ø11.2 ø11.2 ø116.6 12 mm sq. type ø 172 mm type Model no. Surface treatment Mass (g) Model no. Surface treatment Mass (g) 19-137 Nickel-chrome plating (silver) 26 19-136 Nickel-chrome plating (silver) 49 Representative fans model numbers Dimensions of fans (mm) Representative fans model numbers Dimensions of fans (mm) 9G12* 19E47* ø172 25 12 12 25 9GV12* 19L17* 9GL12* 9GV57* 9G12* 19E17* ø172 51 9GV12* 12 12 38 19E57* 9HV12* 9SG57* 9LG12* 4.3±.3 ø1.6 +1 5 +.5 ø172-1 ø162 +.4 4.3-.2 ø1.6 + 9.5-1 152.5±.5 ø57.2 13 ø72 ø152 Option ø148 EMC guard attached to a cooling fan 519
Options Resin finger guards Dimensions (unit: mm) Material Frame: Resin (PPE+PS) UL file no. E82268 94V- 6 mm sq. type 8 mm sq. type Model no. Mass (g) Model no. Mass (g) 19-13G 7 19-12G 1 AC 6.5±1 5±.3 6.5±.5 4 2±.5 4 ø4.3±.3 82±1 71.5±.3 7±.5 4 2±.5 4 ø4.3±.3 6.5±1 5±.3 82±1 71.5±.3 92 mm sq. type 12 mm sq. type Model no. Mass (g) Model no. Mass (g) 19-11G 12 19-1G 23 92±1 82.5±.3 7±.5 4 2±.5 4 ø4.3±.3 119±1 14.8±.3 7±.5 4 2±.5 4 ø4.3±.3 92±1 82.5±.3 119±1 14.8±.3 Static pressure Airflow - Static pressure characteristics Measured with our double chamber measuring device (12 mm sq. type) (Pa) 16 14 12 1 8 6 4 2 Fan unit (9G1212G11) * With resin finger guard (19-1G) equipped 1 2 3 4 5 Airflow Applied voltage: * Finger guard is attached on air inlet side of fan. Mounting example Fan Chassis Finger guard Small pan-head screws (4) Hexagonal nuts (4) Operating temperature limit is between -2 to +7 C. (non condensing) Plastic finger guards are placed on both the intake and exhaust sides of the fan. No nuts or screws for use in attachment included. 52
Resin filter kits Dimensions (unit: mm) Material Guard, cover: Resin (PPE+PS) UL file no. E82268 94V- Filter: Polyurethane foam UL file no. E74916 (S) 94HF-1 PPI: Particles Per Inch Indicates the number of holes per inch. Note that the higher the number, the finer the grain of the sponge. 6 mm sq. type 8 mm sq. type Model no. Mass (g) Model no. Mass (g) 19-13F13 (13 PPI) 19-12F13 (13 PPI) 19-13F2 (2 PPI) 19-12F2 (2 PPI) 11 19-13F3 (3 PPI) 19-12F3 (3 PPI) 19 19-13F4 (4 PPI) 19-12F4 (4 PPI) Replacement filter model no. Quantity Replacement filter model no. Quantity 19-13M13 (13 PPI) 19-12M13 (13 PPI) 19-13M2 (2 PPI) 19-12M2 (2 PPI) 5 19-13M3 (3 PPI) 19-12M3 (3 PPI) 5 19-13M4 (4 PPI) 19-12M4 (4 PPI) AC 64±1 9.5±.5 5±.3 4 ø4.3±.3 85.5±1 71.5±.3 1.5±.5 4 ø4.3±.3 64±1 5±.3 85.5±1 71.5±.3 4 ø1±.5 4 2±.5 4 ø1±.5 4 2±.5 92 mm sq. type 12 mm sq. type Model no. Mass (g) Model no. Mass (g) 19-11F13 (13 PPI) 19-1F13 (13 PPI) 19-11F2 (2 PPI) 19-1F2 (2 PPI) 25 19-11F3 (3 PPI) 19-1F3 (3 PPI) 44 19-11F4 (4 PPI) 19-1F4 (4 PPI) Replacement filter model no. Quantity Replacement filter model no. Quantity 19-11M13 (13 PPI) 19-1M13 (13 PPI) 19-11M2 (2 PPI) 19-1M2 (2 PPI) 5 19-11M3 (3 PPI) 19-1M3 (3 PPI) 5 19-11M4 (4 PPI) 19-1M4 (4 PPI) 96.5±1 82.5±.3 1.5±.5 4 ø4.3±.3 124±1 14.8±.3 1.5±.5 4 ø4.3±.3 96.5±1 82.5±.3 124±1 14.8±.3 4 ø9.5±.5 4 2±.5 4 ø11±.5 4 2±.5 Airflow - Static pressure characteristics Mounting example Filter replacement (example) Measured with our double chamber measuring device (12 mm sq. type) Replacement filters can be replaced by taking off the front part of the filter kit. There is no need to remove the screws. Static pressure Pa 16 14 12 1 8 6 4 Fan unit 9G1212G11 * With filter kit (19-1F2) equipped * With filter kit (19-1F4) equipped Hexagonal nuts (4) 2 Chassis 1 2 3 4 5 m 3 /min Filter kits Airflow Small pan-head screws (4) Replacement filters Applied voltage: * Filter kit is attached on air inlet side of fan. Filter kit is one of the option to keep air in the chassis clean filtering dust in external atmosphere when pulling-air cooling is implemented. The filter kit is hooked up through mounting hole of fan frame with screw as well as finger guard. Some performances (airflow & static pressure) of the fan motor decreases when filter kit is hooked up. This Filter Kit is composed of 3 components, including a guard, a filter and a cover. It is delivered as a finished product at delivery, saving assembly time when mounting. It can be mounted by inserting a screw in the apertures of the cover. The filter and cover can be easily removed from the guard with one touch. There is no need for fan removal when undertaking maintenance. Operating temperature limit is between -1 to +6 C. (non condensing) The filter will deteriorate with age, and the level of deterioration will vary upon usage conditions. Please be aware that the filter has a greater tendency to deteriorate under high temperature and humidity. For long-term storage, please store under the temperature range of 1 to 3 C, humidity range of 2 to 65%. Usage and storage period is approximately 2 years. Cooling ability decreases with filter contamination due to clogging. Filter replacement is recommended approximately every six months of usage. Please replace the filter if deterioration or clogging is seen at inspection. When replacing the filter, please use genuine SANYO DENKI filters. Do not water-wash the filter. Avoid use and storage under high temperature or humidity, direct sunlight or exposure to ultraviolet light, or in corrosive gas. No nuts or screws for use in attachment included. Fan 521 Option
Options Filter kits Applicable models: AC Fan 12 12 38 mm Dimensions, Reference Dimensions of Mounting Holes (unit: mm) Neither filter kit can be installed on AC fans, or AC fans with sensors. Please evaluate it by assembly filter kits on the derice. AC Model no. Material Mass (g) 19-18 Steel Wire Mesh: Stainless 16-mesh nets in 3 layers Cover: Resin Metal fittings: Steel (chromate-plated) 182 Dimensions 131±.8 8.5 (64) Airflow - Static Pressure Characteristics (Measured with our double chamber measuring device) Static pressure (Pa) 8 7 6 5 4 3 2 19S5 19S5+19-18 Filter kits 6 Hz 5 Hz 1 155.6±.8 1 2 3 Airflow Reference Dimensions of Mounting Holes Mounting Example Mounting plate Spncer Round head screw Hexagon nut Spring washer Washer 127 89 4-4 4-ø4 mm dia holes Fan 131 14.5 The parts shown in the installation diagram (nuts, washers, and screws) are included. Cover (resin) Filter Installation brackets (2 pcs) Holes for cabinet installation Screen kits Applicable models: AC Fan 12 12 38 mm Dimensions, Reference Dimensions of Mounting Holes (unit: mm) Neither screen kit can be installed on AC fans, or AC fans with sensors. AC Model no. Material Mass (g) 19-2 Steel Wire Mesh: Stainless 16-mesh nets in 1 layers Cover: Resin Metal fittings: Steel (chromate-plated) 135 Dimensions 131±.8 89±.6 14.5±.8 155.6±.8 8.5 Airflow - Static Pressure Characteristics (Measured with our double chamber measuring device) Static pressure (Pa) 8 7 6 5 4 3 2 1 19S5 19S5+19-2 Screen kits 6 Hz 5 Hz 1 2 3 Airflow Reference Dimensions of Mounting Holes Mounting Example 127 89 4-4 4-ø4 mm dia holes Screen Kit Round head screw Mounting Plate Washer Spring washer Hexagon nut 131 14.5 The parts shown in the installation diagram (nuts, washers, and screws) are included. Fan Installation brackets (2 pcs) Holes for cabinet installation 522
Plug cord for AC fan Dimensions (unit: mm) AC Products compliant with electrical appliance and material safety law For 8 8 42 mm Model no. Power cord length [L] (mm) Mass (g) 489-8-L1 1 3 489-8-L21 21 61 489-8-L35 35 99 For 8 8 25 mm, 8 8 38 mm, 92 92 25 mm, 12 12 25 mm Model no. Power cord length [L] (mm) Mass (g) 489-16-L1 1 34 489-16-L21 21 64 Flat 2-core vinyl cord VFF.75 mm 2 Black Pre-soldered Flat 2-core vinyl cord VFF.75 mm 2 Black 16.5 6 1 2 25 ORIEX <PS>E JET 3A 25V 5 1 1.5 5.6 L 5 1 11 7.5 2 8.9 17.5 ORIEX <PS>E JET 24 3A 25V 4 8 18 9.5 11.5 6 L 5 1 Pre-soldered For 12 12 38 mm (not including AC/ fan) Model no. Power cord length [L] (mm) Mass (g) 489-6-L1 1 47 489-6-L21 21 76 489-6-L35 35 114 For 12 12 38 mm (not including AC/ fan) Model no. Power cord length [L] (mm) Mass (g) 489-37-L1 1 46 489-37-L21 21 76 489-37-L35 35 114 7.9 IN G 5 8 19.5 26.9 <PS> E JET ORIEX 3A 25V 24 4 G +2 6 L VSF1.25 mm 2 For ground, Black 5 1 Flat 2-core vinyl cord VFF.75 mm 2 Black Pre-soldered IN G 7.9 5 8 21.2 24.7 26.9 <PS>E JET ORIEX 3A 25V R1 4 24 G +2 6 L 5 VSF1.25 mm 2 For ground, Black 1 Flat 2-core vinyl cord VFF.75 mm 2 Black Pre-soldered For 16 16 51 mm Model no. Power cord length [L] (mm) Mass (g) 489-1618-L1 1 34 489-1618-L21 21 63 489-1618-L28 28 83 For ø 172 51 mm, ø 172 15 51 mm, 16 16 51 mm Model no. Power cord length [L] (mm) Mass (g) 489-1619-L1 1 34 489-1619-L21 21 64 17.5 8 R.3 9 11 ORIEX 3A 25V PS E JET 2 4 4.5 16.5 5.5 L 5 1 Pre-soldered Flat 2-core vinyl cord VFF.75 mm 2 Black PS E JET ORIEX S272 3A 25V 19 17.5 8 Option 19.5 18.5 18 9.5 9 13.5 3 16.5 L 5 1 Pre-soldered Flat 2-core vinyl cord VFF.75 mm 2 Black Be careful not to damage the plug/cord when taking them out of the package. 523
Options Plug cord for AC fan Dimensions (unit: mm) AC UL/CSA certified UL file no.: E5197 CSA file no.: LR6748 For 12 12 38 mm (not including AC/ fan) Model no. Power cord length [L] (mm) Mass (g) 489-7-L1 1 48 489-7-L21 21 8 8.2 8 24.7 7.9 24 4 26.9 6 +2 L UL 115 AWG18 For ground, green/yellow spiral 5 Pre-soldered 1 Flat 2-core vinyl cord UL SPT-1 AWG18 Black For 8 8 25 mm, 8 8 38 mm, 92 92 25 mm, 12 12 25 mm Model no. Power cord length [L] (mm) Mass (g) 489-47-L1 1 38 489-47-L21 21 71 11 8.9 7.5 17.5 R1 24 8 11.5 4 18 R1.5 9.5 2 R1 L Flat 2-core vinyl cord UL SPT-1 AWG18 Black 5 1 Pre-soldered 6 For ø 172 51 mm, ø 172 15 51 mm, 16 16 51 mm Model no. Power cord length [L] (mm) Mass (g) 489-84-L1 1 37 489-84-L21 21 7 16.5 15.5 9 13.5 16.5 3 L 5 1 For 16 16 51mm 8 Model no. Power cord length [L] (mm) Mass (g) 489-86-L1 1 37 489-86-L21 21 7 9 11 17.5 ORIEX 3A 25V 16.5 4 16.5 37 L 5.5 5 1 Pre-soldered Flat 2-core vinyl cord UL SPT-1 AWG 18 Black 8 Pre-soldered Flat 2-core vinyl cord UL SPT-1 AWG 18 Black Plug cord for AC fan Dimensions (unit: mm) AC Products compliant with electrical appliance and material safety law, UL/CSA [c-ul] certified UL file no.e4322 Wiring Harness for Sensor Model no. Power cord length [L] (mm) Mass (g) 489-1635-L1 1 38 489-1635-L21 21 74 Model no. Mass (g) 489-1636 9 1±2 8 1 15.5 8 L Pre-soldered 先端予備はんだ 1±1 Pre-soldered 予備はんだ 4 1 2 4 17 5±5 1±2 Flat 平形 2-core 2 芯ビニールコード vinyl cord SPT-1 & HVFF.75 mm 2 2 (AWG18) Black 黒 Be careful not to damage the plug/cord when taking them out of the package. 524
Index by Model No./Safety Standards List - Fans Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor Please contact your point of sale regarding low-speed sensors. With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 19BC12FC7-1 19BC12FA7-1 19BC12FC7-1 19BC12FD7-1 52 15 mm 436 19BC12GC7-1 19BC12GA7-1 19BC12GC7-1 19BC12GD7-1 52 15 mm 436 19BC12HC7-1 19BC12HA7-1 19BC12HC7-1 19BC12HD7-1 52 15 mm 436 19BC12MC7-1 19BC12MA7-1 19BC12MC7-1 19BC12MD7-1 52 15 mm 436 19BC24FC7-1 19BC24FA7-1 19BC24FC7-1 19BC24FD7-1 52 15 mm 436 19BC24GC7-1 19BC24GA7-1 19BC24GC7-1 19BC24GD7-1 52 15 mm 436 19BC24HC7-1 19BC24HA7-1 19BC24HC7-1 19BC24HD7-1 52 15 mm 436 19BD12FC2 19BD12FA2 19BD12FC2 19BD12FD2 76 3 mm 44 19BD12HC2 19BD12HA2 19BD12HC2 19BD12HD2 19BD12P2H1 76 3 mm 44 19BD12MC2 19BD12MA2 19BD12MC2 19BD12MD2 76 3 mm 44 19BD24FC2 19BD24FA2 19BD24FC2 19BD24FD2 76 3 mm 44 19BD24HC2 19BD24HA2 19BD24HC2 19BD24HD2 76 3 mm 44 19BD24MC2 19BD24MA2 19BD24MC2 19BD24MD2 76 3 mm 44 19BG12HC1 19BG12HA1 19BG12HC1 19BG12HD1 16 4 mm 455 19BG12MC1 19BG12MA1 19BG12MC1 19BG12MD1 16 4 mm 455 19BG24HC1 19BG24HA1 19BG24HC1 19BG24HD1 16 4 mm 455 19BG24MC1 19BG24MA1 19BG24MC1 19BG24MD1 16 4 mm 455 19BJ12HC2 19BJ12HA2 19BJ12HC2 19BJ12HD2 127 32 mm 453 19BJ12MC2 19BJ12MA2 19BJ12MC2 19BJ12MD2 127 32 mm 453 19BJ24HC2 19BJ24HA2 19BJ24HC2 19BJ24HD2 127 32 mm 453 19BJ24MC2 19BJ24MA2 19BJ24MC2 19BJ24MD2 127 32 mm 453 19BM12GC2-1 19BM12GA2-1 19BM12GC2-1 19BM12GD2-1 97 33 mm 442 19BM12HC2-1 19BM12HA2-1 19BM12HC2-1 19BM12HD2-1 97 33 mm 442 19BM12MC2-1 19BM12MA2-1 19BM12MC2-1 19BM12MD2-1 19BM12P2M1 97 33 mm 442 19BM24GC2-1 19BM24GA2-1 19BM24GC2-1 19BM24GD2-1 97 33 mm 442 19BM24HC2-1 19BM24HA2-1 19BM24HC2-1 19BM24HD2-1 97 33 mm 442 19BM24MC2-1 19BM24MA2-1 19BM24MC2-1 19BM24MD2-1 97 33 mm 442 19E1312A11 19E1312A12 19E1312A11 19E1312A1D1 127 127 38 mm No 189 19E1312S11 19E1312S12 19E1312S11 19E1312S1D1 127 127 38 mm No 189 19E1324A11 19E1324A12 19E1324A11 19E1324A1D1 127 127 38 mm No 189 19E1324G11 19E1324G12 19E1324G11 19E1324G1D1 127 127 38 mm No 189 19E1324S11 19E1324S12 19E1324S11 19E1324S1D1 127 127 38 mm No 189 19E1348A11 19E1348A12 19E1348A11 19E1348A1D1 127 127 38 mm No 189 19E1348G11 19E1348G12 19E1348G11 19E1348G1D1 127 127 38 mm No 189 19E1348S11 19E1348S12 19E1348S11 19E1348S1D1 127 127 38 mm No 189 19E1712F51 19E1712F52 19E1712F51 19E1712F5D1 ø 172 51 mm No 213 19E1712H51 19E1712H52 19E1712H51 19E1712H5D1 ø 172 51 mm No 213 19E1712K51 19E1712K52 19E1712K51 ø 172 51 mm No 213 19E1712M51 19E1712M52 19E1712M51 ø 172 51 mm No 213 19E1712Y51 19E1712Y52 19E1712Y51 ø 172 51 mm No 213 19E1724C51 19E1724C52 19E1724C51 19E1724C5D1 9EH1724P5C1 ø 172 51 mm No 213 19E1724F51 19E1724F52 19E1724F51 19E1724F5D1 ø 172 51 mm No 213 19E1724H51 19E1724H52 19E1724H51 19E1724H5D1 ø 172 51 mm No 213 19E1724K51 19E1724K52 19E1724K51 19E1724K5D1 ø 172 51 mm No 213 19E1724M51 19E1724M52 19E1724M51 19E1724M5D1 ø 172 51 mm No 213 19E1748C51 19E1748C52 19E1748C51 ø 172 51 mm No 213 19E1748F51 19E1748F52 19E1748F51 ø 172 51 mm No 213 19E1748H51 19E1748H52 19E1748H51 19E1748H5D1 ø 172 51 mm No 213 19E1748K51 19E1748K52 19E1748K51 19E1748P5K3 ø 172 51 mm No 213 19E1748M51 19E1748M52 19E1748M51 ø 172 51 mm No 213 19E4712L41 19E4712L42 19E4712L41 19E4712L4D1 ø 172 147 25 mm No 2 19E4712M41 19E4712M42 19E4712M41 19E4712M4D1 ø 172 147 25 mm No 2 Standard name Certification number UL E4681 CSA 172248 TÜV certification numbers differ by model. The content of this catalog is current as of September 217. Please ask us about new products that we released after September 217 if you want. 542
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 19E4724F41 19E4724F42 19E4724F41 19E4724F4D1 ø 172 147 25 mm No 2 19E4724H41 19E4724H42 19E4724H41 19E4724H4D1 19E4724P4H1 ø 172 147 25 mm No 2 19E4724L41 19E4724L42 19E4724L41 19E4724L4D1 ø 172 147 25 mm No 2 19E4724M41 19E4724M42 19E4724M41 19E4724M4D1 ø 172 147 25 mm No 2 19E4748F41 19E4748F42 19E4748F41 19E4748F4D1 ø 172 147 25 mm No 2 19E4748H41 19E4748H42 19E4748H41 19E4748H4D1 ø 172 147 25 mm No 2 19E4748L41 19E4748L42 19E4748L41 19E4748L4D1 ø 172 147 25 mm No 2 19E4748M41 19E4748M42 19E4748M41 19E4748M4D1 ø 172 147 25 mm No 2 19E4748S41 19E4748S42 19E4748S41 19E4748S4D1 ø 172 147 25 mm No 2 19E5712F51 19E5712F52 19E5712F51 ø 172 15 51 mm No 21 19E5712H51 19E5712H52 19E5712H51 19E5712H5D1 ø 172 15 51 mm No 21 19E5712K51 19E5712K52 19E5712K51 19E5712K5D1 19E5712P5K4 ø 172 15 51 mm No 21 19E5712M51 19E5712M52 19E5712M51 19E5712M5D1 ø 172 15 51 mm No 21 19E5712Y51 19E5712Y52 19E5712Y51 ø 172 15 51 mm No 21 19E5724C51 19E5724C52 19E5724C51 19E5724C5D1 9EH5724P5C1 ø 172 15 51 mm No 21 19E5724F51 19E5724F52 19E5724F51 ø 172 15 51 mm No 21 19E5724H51 19E5724H52 19E5724H51 19E5724H5D1 ø 172 15 51 mm No 21 19E5724K51 19E5724K52 19E5724K51 19E5724K5D1 ø 172 15 51 mm No 21 19E5724M51 19E5724M52 19E5724M51 ø 172 15 51 mm No 21 19E5748C51 19E5748C52 19E5748C51 ø 172 15 51 mm No 21 19E5748F51 19E5748F52 19E5748F51 ø 172 15 51 mm No 21 19E5748H51 19E5748H52 19E5748H51 19E5748H5D1 ø 172 15 51 mm No 21 19E5748K51 19E5748K52 19E5748K51 ø 172 15 51 mm No 21 19E5748M51 19E5748M52 19E5748M51 ø 172 15 51 mm No 21 19L1712H51 19L1712H52 19L1712H51 19L1712H5D1 ø 172 51 mm No 391 19L1712M51 19L1712M52 19L1712M51 19L1712M5D1 ø 172 51 mm No 391 19L1724H51 19L1724H52 19L1724H51 19L1724H5D1 ø 172 51 mm No 391 19L1724M51 19L1724M52 19L1724M51 19L1724M5D1 ø 172 51 mm No 391 19L1748H51 19L1748H52 19L1748H51 19L1748H5D1 ø 172 51 mm No 391 19L1748M51 19L1748M52 19L1748M51 19L1748M5D1 ø 172 51 mm No 391 19L5712H51 19L5712H52 19L5712H51 19L5712H5D1 ø 172 15 51 mm No 389 19L5712M51 19L5712M52 19L5712M51 19L5712M5D1 ø 172 15 51 mm No 389 19L5724H51 19L5724H52 19L5724H51 19L5724H5D1 ø 172 15 51 mm No 389 19L5724M51 19L5724M52 19L5724M51 19L5724M5D1 ø 172 15 51 mm No 389 19L5748H51 19L5748H52 19L5748H51 19L5748H5D1 ø 172 15 51 mm No 389 19L5748M51 19L5748M52 19L5748M51 19L5748M5D1 ø 172 15 51 mm No 389 19P45F313 19P45F323 19P45F313 19P45F3D13 4 4 28 mm Yes 47 19P45F61 19P45F62 19P45F61 19P45F6D1 4 4 2 mm Yes 3 19P45H313 19P45H323 19P45H313 19P45H3D13 4 4 28 mm Yes 47 19P45H61 19P45H62 19P45H61 19P45H6D1 4 4 2 mm Yes 3 19P45H71 19P45H72 19P45H71 19P45H7D1 4 4 15 mm Yes 23 19P45H91 19P45H92 19P45H91 19P45H9D1 4 4 1 mm Yes 19 19P45J61 19P45J62 19P45J61 4 4 2 mm Yes 3 19P45M61 19P45M62 19P45M61 19P45M6D1 4 4 2 mm Yes 3 19P45M71 19P45M72 19P45M71 19P45M7D1 4 4 15 mm Yes 23 19P45M91 19P45M92 19P45M91 19P45M9D1 4 4 1 mm Yes 19 19P412B313 19P412B323 19P412B313 19P412B3D13 19P412P3B13 4 4 28 mm Yes 47 19P412D61 19P412D62 19P412D61 19P412D6D1 4 4 2 mm Yes 3 19P412E61 19P412E62 19P412E61 19P412E6D1 4 4 2 mm Yes 3 19P412F313 19P412F323 19P412F313 19P412F3D13 4 4 28 mm Yes 47 19P412F61 19P412F62 19P412F61 19P412F6D1 4 4 2 mm Yes 3 19P412G313 19P412G323 19P412G313 19P412G3D13 4 4 28 mm Yes 47 19P412G61 19P412G62 19P412G61 19P412G6D1 4 4 2 mm Yes 3 19P412H313 19P412H323 19P412H313 19P412H3D13 19P412P3H13 4 4 28 mm Yes 47 19P412H61 19P412H62 19P412H61 19P412H6D1 4 4 2 mm Yes 3 19P412H71 19P412H72 19P412H71 19P412H7D1 4 4 15 mm Yes 23 19P412H91 19P412H92 19P412H91 19P412H9D1 19P412P9H1 4 4 1 mm Yes 19 19P412J313 19P412J323 19P412J313 19P412J3D13 9PH412P3J13 4 4 28 mm Yes 47 19P412K313 19P412K323 19P412K313 19P412K3D13 9PH412P3K33 4 4 28 mm Yes 47 19P412M313 19P412M323 19P412M313 19P412M3D13 4 4 28 mm Yes 47 19P412M61 19P412M62 19P412M61 19P412M6D1 4 4 2 mm Yes 3 Index by Model No. Please contact your point of sale regarding low-speed sensors. 543
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 19P412M71 19P412M72 19P412M71 19P412M7D1 4 4 15 mm Yes 23 19P412M91 19P412M92 19P412M91 19P412M9D1 4 4 1 mm Yes 19 19P412R71 19P412R72 19P412R71 19P412R7D1 4 4 15 mm Yes 23 19P412S71 19P412S72 19P412S71 19P412S7D1 4 4 15 mm Yes 23 19P424B313 19P424B323 19P424B313 19P424B3D13 4 4 28 mm Yes 47 19P424B61 19P424B62 19P424B61 19P424B6D1 4 4 2 mm Yes 3 19P424D61 19P424D62 19P424D61 19P424D6D1 4 4 2 mm Yes 3 19P424F313 19P424F323 19P424F313 19P424F3D13 4 4 28 mm Yes 47 19P424F61 19P424F62 19P424F61 19P424F6D1 4 4 2 mm Yes 3 19P424G313 19P424G323 19P424G313 19P424G3D13 4 4 28 mm Yes 47 19P424G61 19P424G62 19P424G61 19P424G6D1 4 4 2 mm Yes 3 19P424H313 19P424H323 19P424H313 19P424H3D13 4 4 28 mm Yes 47 19P424H61 19P424H62 19P424H61 19P424H6D1 4 4 2 mm Yes 3 19P424H71 19P424H72 19P424H71 19P424H7D1 4 4 15 mm Yes 23 19P424J313 19P424J323 19P424J313 19P424J3D13 4 4 28 mm Yes 47 19P424R313 19P424R323 19P424R313 4 4 28 mm Yes 47 19P55M71 19P55M72 19P55M71 19P55M7D1 52 52 15 mm Yes 54 19P512A71 19P512A72 19P512A71 19P512A7D1 52 52 15 mm Yes 54 19P512H71 19P512H72 19P512H71 19P512H7D1 52 52 15 mm Yes 54 19P512M71 19P512M72 19P512M71 19P512M7D1 52 52 15 mm Yes 54 19P524A71 19P524A72 19P524A71 19P524A7D1 52 52 15 mm Yes 54 19P524H71 19P524H72 19P524H71 19P524H7D1 52 52 15 mm Yes 54 19P524M71 19P524M72 19P524M71 19P524M7D1 52 52 15 mm Yes 54 19P65H71 19P65H72 19P65H71 19P65H7D1 6 6 15 mm Yes 62 19P65M71 19P65M72 19P65M71 19P65M7D1 6 6 15 mm Yes 62 19P612B71 19P612B72 19P612B71 19P612B7D1 6 6 15 mm Yes 62 19P612H61 19P612H62 19P612H61 19P612H6D1 6 6 2 mm Yes 68 19P612H71 19P612H72 19P612H71 19P612H7D1 6 6 15 mm Yes 62 19P612K71 19P612K72 19P612K71 19P612K7D1 6 6 15 mm Yes 62 19P612M61 19P612M62 19P612M61 19P612M6D1 6 6 2 mm Yes 68 19P612M71 19P612M72 19P612M71 19P612M7D1 6 6 15 mm Yes 62 19P612S71 19P612S72 19P612S71 19P612S7D1 6 6 15 mm Yes 62 19P612W61 19P612W62 19P612W61 19P612W6D1 6 6 2 mm Yes 68 19P624H61 19P624H62 19P624H61 19P624H6D1 6 6 2 mm Yes 68 19P624H71 19P624H72 19P624H71 19P624H7D1 6 6 15 mm Yes 62 19P624J71 19P624J72 19P624J71 19P624J7D1 6 6 15 mm Yes 62 19P624M61 19P624M62 19P624M61 19P624M6D1 6 6 2 mm Yes 68 19P624M71 19P624M72 19P624M71 19P624M7D1 6 6 15 mm Yes 62 19P624S71 19P624S72 19P624S71 19P624S7D1 6 6 15 mm Yes 62 19P624W61 19P624W62 19P624W61 19P624W6D1 6 6 2 mm Yes 68 19P648H61 19P648H62 19P648H61 19P648H6D1 6 6 2 mm Yes 68 19P812C61 19P812C62 19P812C61 19P812C6D1 8 8 2 mm Yes 15 19P812H61 19P812H62 19P812H61 19P812H6D1 8 8 2 mm Yes 15 19P812H71 19P812H72 19P812H71 19P812H7D1 8 8 15 mm Yes 1 19P812M61 19P812M62 19P812M61 19P812M6D1 8 8 2 mm Yes 15 19P812M71 19P812M72 19P812M71 19P812M7D1 8 8 15 mm Yes 1 19P824H61 19P824H62 19P824H61 19P824H6D1 8 8 2 mm Yes 15 19P824H71 19P824H72 19P824H71 19P824H7D1 8 8 15 mm Yes 1 19P824M61 19P824M62 19P824M61 19P824M6D1 8 8 2 mm Yes 15 19P824M71 19P824M72 19P824M71 19P824M7D1 8 8 15 mm Yes 1 19P848C61 19P848C62 19P848C61 19P848C6D1 8 8 2 mm Yes 15 19P848H61 19P848H61 19P848H6D1 8 8 2 mm Yes 15 19P1312H11 19P1312H12 19P1312H11 19P1312H1D1 127 127 38 mm Yes 187 19P1312H111 19P1312H121 19P1312H111 19P1312H1D11 127 127 38 mm No 187 19P1312S11 19P1312S12 19P1312S11 19P1312S1D1 127 127 38 mm Yes 187 19P1312S111 19P1312S121 19P1312S111 19P1312S1D11 127 127 38 mm No 187 19P1324H11 19P1324H12 19P1324H11 19P1324H1D1 127 127 38 mm Yes 187 19P1324H111 19P1324H121 19P1324H111 19P1324H1D11 127 127 38 mm No 187 19P1324S11 19P1324S12 19P1324S11 19P1324S1D1 127 127 38 mm Yes 187 19P1324S111 19P1324S121 19P1324S111 19P1324S1D11 127 127 38 mm No 187 19P1348H11 19P1348H12 19P1348H11 19P1348H1D1 127 127 38 mm Yes 187 544 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 19P1348H111 19P1348H121 19P1348H111 19P1348H1D11 127 127 38 mm No 187 19P1348S11 19P1348S12 19P1348S11 19P1348S1D1 127 127 38 mm Yes 187 19P1348S111 19P1348S121 19P1348S111 19P1348S1D11 127 127 38 mm No 187 19P1412H11 19P1412H12 19P1412H11 19P1412H1D1 14 14 38 mm Yes 196 19P1412M11 19P1412M12 19P1412M11 14 14 38 mm Yes 196 19P1424H11 19P1424H12 19P1424H11 19P1424H1D1 14 14 38 mm Yes 196 19P1424M11 19P1424M12 19P1424M11 14 14 38 mm Yes 196 19P1448H11 19P1448H12 19P1448H11 14 14 38 mm Yes 196 19P1448M11 19P1448M12 19P1448M11 14 14 38 mm Yes 196 19R65F41 19R65F42 19R65F41 19R65F4D1 6 6 25 mm Yes 76 19R65F411 19R65F421 19R65F411 6 6 25 mm No 76 19R65H41 19R65H42 19R65H41 19R65H4D1 6 6 25 mm Yes 76 19R65H411 19R65H421 19R65H411 6 6 25 mm No 76 19R65M41 19R65M42 19R65M41 19R65M4D1 6 6 25 mm Yes 76 19R65M411 19R65M421 19R65M411 6 6 25 mm No 76 19R612D41 19R612D42 19R612D41 19R612D4D1 6 6 25 mm Yes 76 19R612D411 19R612D421 19R612D411 19R612D4D11 6 6 25 mm No 76 19R612F41 19R612F42 19R612F41 19R612F4D1 6 6 25 mm Yes 76 19R612F411 19R612F421 19R612F411 19R612F4D11 6 6 25 mm No 76 19R612G41 19R612G42 19R612G41 19R612G4D1 6 6 25 mm Yes 76 19R612G411 19R612G421 19R612G411 19R612G4D11 6 6 25 mm No 76 19R612H41 19R612H42 19R612H41 19R612H4D1 6 6 25 mm Yes 76 19R612H411 19R612H421 19R612H411 19R612H4D11 6 6 25 mm No 76 19R612J41 19R612J42 19R612J41 19R612J4D1 19R612P4J3 6 6 25 mm Yes 76 19R612J411 19R612J421 19R612J411 19R612J4D11 19R612P4J61 6 6 25 mm No 76 19R612M41 19R612M42 19R612M41 19R612M4D1 6 6 25 mm Yes 76 19R612M411 19R612M421 19R612M411 19R612M4D11 6 6 25 mm No 76 19R612S41 19R612S42 19R612S41 19R612S4D1 6 6 25 mm Yes 76 19R612S411 19R612S421 19R612S411 19R612S4D11 6 6 25 mm No 76 19R624D41 19R624D42 19R624D41 19R624D4D1 6 6 25 mm Yes 76 19R624D411 19R624D421 19R624D411 6 6 25 mm No 76 19R624F41 19R624F42 19R624F41 19R624F4D1 6 6 25 mm Yes 76 19R624F411 19R624F421 19R624F411 19R624F4D11 6 6 25 mm No 76 19R624G41 19R624G42 19R624G41 19R624G4D1 6 6 25 mm Yes 76 19R624G411 19R624G421 19R624G411 19R624G4D11 6 6 25 mm No 76 19R624H41 19R624H42 19R624H41 19R624H4D1 6 6 25 mm Yes 76 19R624H411 19R624H421 19R624H411 19R624H4D11 6 6 25 mm No 76 19R624J41 19R624J42 19R624J41 19R624J4D1 9RH624P4J1 6 6 25 mm Yes 76 19R624J411 19R624J421 19R624J411 19R624J4D11 6 6 25 mm No 76 19R624M41 19R624M42 19R624M41 19R624M4D1 6 6 25 mm Yes 76 19R624M411 19R624M421 19R624M411 19R624M4D11 6 6 25 mm No 76 19R624S41 19R624S42 19R624S41 19R624S4D1 6 6 25 mm Yes 76 19R624S411 19R624S421 19R624S411 19R624S4D11 6 6 25 mm No 76 19R648G41 19R648G42 19R648G41 19R648G4D1 6 6 25 mm Yes 76 19R648G411 19R648G421 19R648G411 19R648G4D11 6 6 25 mm No 76 19R648H41 19R648H42 19R648H41 19R648H4D1 6 6 25 mm Yes 76 19R648H411 19R648H421 19R648H411 19R648H4D11 6 6 25 mm No 76 19R648J41 19R648J42 19R648J41 19R648J4D1 6 6 25 mm Yes 76 19R648J411 19R648J421 19R648J411 6 6 25 mm No 76 19R85F41 19R85F42 19R85F41 19R85F4D1 8 8 25 mm Yes 117 19R85F411 19R85F421 19R85F411 8 8 25 mm No 117 19R85M41 19R85M42 19R85M41 19R85M4D1 8 8 25 mm Yes 117 19R85M411 19R85M421 19R85M411 8 8 25 mm No 117 19R812E41 19R812E42 19R812E41 8 8 25 mm Yes 117 19R812E411 19R812E411 8 8 25 mm No 117 19R812F41 19R812F42 19R812F41 19R812F4D1 8 8 25 mm Yes 117 19R812F411 19R812F421 19R812F411 19R812F4D11 8 8 25 mm No 117 19R812G41 19R812G42 19R812G41 19R812G4D1 8 8 25 mm Yes 117 19R812G411 19R812G421 19R812G411 19R812G4D11 8 8 25 mm No 117 19R812H41 19R812H42 19R812H41 19R812H4D1 8 8 25 mm Yes 117 19R812H411 19R812H421 19R812H411 19R812H4D11 8 8 25 mm No 117 Index by Model No. Please contact your point of sale regarding low-speed sensors. 545
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 19R812L41 19R812L42 19R812L41 19R812L4D1 8 8 25 mm Yes 117 19R812L411 19R812L421 19R812L411 19R812L4D11 8 8 25 mm No 117 19R812M41 19R812M42 19R812M41 19R812M4D1 8 8 25 mm Yes 117 19R812M411 19R812M421 19R812M411 19R812M4D11 8 8 25 mm No 117 19R812S41 19R812S42 19R812S41 19R812S4D1 8 8 25 mm Yes 117 19R812S411 19R812S421 19R812S411 19R812S4D11 8 8 25 mm No 117 19R824F41 19R824F42 19R824F41 19R824F4D1 8 8 25 mm Yes 117 19R824F411 19R824F421 19R824F411 19R824F4D11 8 8 25 mm No 117 19R824G41 19R824G42 19R824G41 19R824G4D1 8 8 25 mm Yes 117 19R824G411 19R824G421 19R824G411 19R824G4D11 8 8 25 mm No 117 19R824H41 19R824H42 19R824H41 19R824H4D1 8 8 25 mm Yes 117 19R824H411 19R824H421 19R824H411 19R824H4D11 8 8 25 mm No 117 19R824L41 19R824L42 19R824L41 19R824L4D1 8 8 25 mm Yes 117 19R824L411 19R824L421 19R824L411 19R824L4D11 8 8 25 mm No 117 19R824M41 19R824M42 19R824M41 19R824M4D1 8 8 25 mm Yes 117 19R824M411 19R824M421 19R824M411 19R824M4D11 8 8 25 mm No 117 19R824S41 19R824S42 19R824S41 19R824S4D1 8 8 25 mm Yes 117 19R824S411 19R824S421 19R824S411 19R824S4D11 8 8 25 mm No 117 19R848K41 19R848K42 19R848K41 19R848K4D1 8 8 25 mm Yes 117 19R848K411 19R848K421 19R848K411 19R848K4D11 8 8 25 mm No 117 19R848S41 19R848S42 19R848S41 19R848S4D1 8 8 25 mm Yes 117 19R848S411 19R848S421 19R848S411 19R848S4D11 8 8 25 mm No 117 9A612F41 9A612F42 9A612F41 9A612F4D1 6 6 25 mm Yes 8 9A612F411 9A612F421 9A612F411 9A612F4D11 6 6 25 mm No 8 9A612G41 9A612G42 9A612G41 9A612G4D1 9AH612P4G3 6 6 25 mm Yes 8 9A612G411 9A612G421 9A612G411 9A612G4D11 6 6 25 mm No 8 9A612H41 9A612H42 9A612H41 9A612H4D1 9AH612P4H5 6 6 25 mm Yes 8 9A612H411 9A612H421 9A612H411 9A612H4D11 6 6 25 mm No 8 9A612M41 9A612M42 9A612M41 9A612M4D1 6 6 25 mm Yes 8 9A612M411 9A612M421 9A612M411 9A612M4D11 6 6 25 mm No 8 9A612S41 9A612S42 9A612S41 9A612S4D1 6 6 25 mm Yes 8 9A612S411 9A612S421 9A612S411 9A612S4D11 6 6 25 mm No 8 9A624F41 9A624F42 9A624F41 9A624F4D1 6 6 25 mm Yes 8 9A624F411 9A624F421 9A624F411 9A624F4D11 6 6 25 mm No 8 9A624G41 9A624G42 9A624G41 9A624G4D1 6 6 25 mm Yes 8 9A624G411 9A624G421 9A624G411 6 6 25 mm No 8 9A624H41 9A624H42 9A624H41 9A624H4D1 6 6 25 mm Yes 8 9A624H411 9A624H421 9A624H411 9A624H4D11 6 6 25 mm No 8 9A624M41 9A624M42 9A624M41 9A624M4D1 6 6 25 mm Yes 8 9A624M411 9A624M421 9A624M411 9A624M4D11 6 6 25 mm No 8 9A624S41 9A624S42 9A624S41 9A624S4D1 6 6 25 mm Yes 8 9A624S411 9A624S421 9A624S411 9A624S4D11 6 6 25 mm No 8 9A812F41 9A812F42 9A812F41 9A812F4D1 8 8 25 mm Yes 12 9A812F411 9A812F421 9A812F411 9A812F4D11 8 8 25 mm No 12 9A812G41 9A812G42 9A812G41 9A812G4D1 9AH812P4G4 8 8 25 mm Yes 12 9A812G411 9A812G421 9A812G411 9A812G4D11 9AH812P4G11 8 8 25 mm No 12 9A812H41 9A812H42 9A812H41 9A812H4D1 9AH812P4H4 8 8 25 mm Yes 12 9A812H411 9A812H421 9A812H411 9A812H4D11 8 8 25 mm No 12 9A812L41 9A812L42 9A812L41 9A812L4D1 8 8 25 mm Yes 12 9A812L411 9A812L421 9A812L411 9A812L4D11 8 8 25 mm No 12 9A812M41 9A812M42 9A812M41 9A812M4D1 8 8 25 mm Yes 12 9A812M411 9A812M421 9A812M411 9A812M4D11 8 8 25 mm No 12 9A812S41 9A812S42 9A812S41 9A812S4D1 8 8 25 mm Yes 12 9A812S411 9A812S421 9A812S411 9A812S4D11 8 8 25 mm No 12 9A824F41 9A824F42 9A824F41 9A824F4D1 8 8 25 mm Yes 12 9A824F411 9A824F421 9A824F411 9A824F4D11 8 8 25 mm No 12 9A824G41 9A824G42 9A824G41 9A824G4D1 8 8 25 mm Yes 12 9A824G411 9A824G421 9A824G411 9A824G4D11 8 8 25 mm No 12 9A824H41 9A824H42 9A824H41 9A824H4D1 8 8 25 mm Yes 12 9A824H411 9A824H421 9A824H411 9A824H4D11 8 8 25 mm No 12 9A824L41 9A824L42 9A824L41 9A824L4D1 8 8 25 mm Yes 12 546 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9A824L411 9A824L421 9A824L411 9A824L4D11 8 8 25 mm No 12 9A824M41 9A824M42 9A824M41 9A824M4D1 8 8 25 mm Yes 12 9A824M411 9A824M421 9A824M411 9A824M4D11 8 8 25 mm No 12 9A824S41 9A824S42 9A824S41 9A824S4D1 8 8 25 mm Yes 12 9A824S411 9A824S421 9A824S411 9A824S4D11 8 8 25 mm No 12 9A912F41 9A912F42 9A912F41 9A912F4D1 92 92 25 mm Yes 146 9A912F411 9A912F421 9A912F411 9A912F4D11 92 92 25 mm No 146 9A912G41 9A912G42 9A912G41 9A912G4D1 9AH912P4G3 92 92 25 mm Yes 146 9A912G411 9A912G421 9A912G411 9A912G4D11 92 92 25 mm No 146 9A912H41 9A912H42 9A912H41 9A912H4D1 9AH912P4H3 92 92 25 mm Yes 146 9A912H411 9A912H421 9A912H411 9A912H4D11 92 92 25 mm No 146 9A912L41 9A912L42 9A912L41 9A912L4D1 92 92 25 mm Yes 146 9A912L411 9A912L421 9A912L411 9A912L4D11 92 92 25 mm No 146 9A912M41 9A912M42 9A912M41 9A912M4D1 92 92 25 mm Yes 146 9A912M411 9A912M421 9A912M411 9A912M4D11 92 92 25 mm No 146 9A912S41 9A912S42 9A912S41 9A912S4D1 92 92 25 mm Yes 146 9A912S411 9A912S421 9A912S411 9A912S4D11 92 92 25 mm No 146 9A924F41 9A924F42 9A924F41 9A924F4D1 92 92 25 mm Yes 146 9A924F411 9A924F421 9A924F411 9A924F4D11 92 92 25 mm No 146 9A924G41 9A924G42 9A924G41 9A924G4D1 92 92 25 mm Yes 146 9A924G411 9A924G421 9A924G411 92 92 25 mm No 146 9A924H41 9A924H42 9A924H41 9A924H4D1 92 92 25 mm Yes 146 9A924H411 9A924H421 9A924H411 9A924H4D11 92 92 25 mm No 146 9A924L41 9A924L42 9A924L41 9A924L4D1 92 92 25 mm Yes 146 9A924L411 9A924L421 9A924L411 9A924L4D11 92 92 25 mm No 146 9A924M41 9A924M42 9A924M41 9A924M4D1 92 92 25 mm Yes 146 9A924M411 9A924M421 9A924M411 9A924M4D11 92 92 25 mm No 146 9A924S41 9A924S42 9A924S41 9A924S4D1 92 92 25 mm Yes 146 9A924S411 9A924S421 9A924S411 9A924S4D11 92 92 25 mm No 146 9A948S41 9A948S42 9A948S41 9A948S4D1 92 92 25 mm Yes 146 9A948S411 9A948S421 9A948S411 92 92 25 mm No 146 9B1TP24PH1 9B1TP24PH1 ø 27 99 mm 43 9B1TP48PG1 9B1TP48PG1 ø 27 99 mm 43 9B1TP48PH1 9B1TP48PH1 ø 27 99 mm 43 9B1TS48PG1 9B1TS48PG1 ø 27 119 mm 433 9B1TS48PH1 9B1TS48PH1 ø 27 119 mm 433 9BD12FC6-1 9BD12FA6-1 9BD12FC6-1 9BD12FD6-1 76 2 mm 438 9BD12HC6-1 9BD12HA6-1 9BD12HC6-1 9BD12HD6-1 76 2 mm 438 9BD12SC6-1 9BD12SA6-1 9BD12SC6-1 9BD12SD6-1 9BD12P6S1 76 2 mm 438 9BD24FC6-1 9BD24FA6-1 9BD24FC6-1 9BD24FD6-1 76 2 mm 438 9BD24HC6-1 9BD24HA6-1 9BD24HC6-1 9BD24HD6-1 76 2 mm 438 9BD24SC6-1 9BD24SA6-1 9BD24SC6-1 9BD24SD6-1 9BD24P6S6 76 2 mm 438 9BFB12P2H3 9BFB12P2H3 12 32 mm 451 9BFB24P2H3 9BFB24P2H3 12 32 mm 451 9BMB12F21 9BMB12F22 9BMB12F21 9BMB12F2D1 9BMB12P2F1 97 33 mm 446 9BMB12G21 9BMB12G22 9BMB12G21 9BMB12G2D1 9BMB12P2G1 97 33 mm 446 9BMB12H21 9BMB12H22 9BMB12H21 9BMB12H2D1 9BMB12P2H1 97 33 mm 446 9BMB12K21 9BMB12K22 9BMB12K21 9BMB12P2K1 97 33 mm 446 9BMB12P2F1 9BMB12F22 9BMB12F21 9BMB12F2D1 9BMB12P2F1 97 33 mm 446 9BMB12P2G1 9BMB12G22 9BMB12G21 9BMB12G2D1 9BMB12P2G1 97 33 mm 446 9BMB12P2H1 9BMB12H22 9BMB12H21 9BMB12H2D1 9BMB12P2H1 97 33 mm 446 9BMB12P2K1 9BMB12K22 9BMB12K21 9BMB12P2K1 97 33 mm 446 9BMB12P2S1 9BMB12S22 9BMB12S21 9BMB12P2S1 97 33 mm 446 9BMB12S21 9BMB12S22 9BMB12S21 9BMB12P2S1 97 33 mm 446 9BMB24F21 9BMB24F22 9BMB24F21 9BMB24F2D1 9BMB24P2F1 97 33 mm 446 9BMB24G21 9BMB24G22 9BMB24G21 9BMB24G2D1 9BMB24P2G1 97 33 mm 446 9BMB24H21 9BMB24H22 9BMB24H21 9BMB24H2D1 9BMB24P2H1 97 33 mm 446 9BMB24K21 9BMB24K22 9BMB24K21 9BMB24P2K1 97 33 mm 446 9BMB24P2F1 9BMB24F22 9BMB24F21 9BMB24F2D1 9BMB24P2F1 97 33 mm 446 9BMB24P2G1 9BMB24G22 9BMB24G21 9BMB24G2D1 9BMB24P2G1 97 33 mm 446 9BMB24P2H1 9BMB24H22 9BMB24H21 9BMB24H2D1 9BMB24P2H1 97 33 mm 446 Index by Model No. Please contact your point of sale regarding low-speed sensors. 547
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9BMB24P2K1 9BMB24K22 9BMB24K21 9BMB24P2K1 97 33 mm 446 9BMB24P2S1 9BMB24S22 9BMB24S21 9BMB24P2S1 97 33 mm 446 9BMB24S21 9BMB24S22 9BMB24S21 9BMB24P2S1 97 33 mm 446 9BMC12P2G1 9BMC12G22 9BMC12P2G1 97 33 mm 444 9BMC24P2G1 9BMC24P2G1 97 33 mm 444 9CR612P5G3 9CR612G52 9CR612G51 9CR612P5G3 6 6 51 mm 236 9CR612P5H3 9CR612H51 9CR612P5H3 6 6 51 mm 236 9CR1212PG3 9CR1212G2 9CR1212G1 9CR1212PG3 12 12 76 mm 254 9CR5748P9G1 9CR5748P9G1 ø 172 15 12 mm 256 9CRA312P4J3 9CRA312J41 9CRA312P4J3 38 38 48 mm 222 9CRA312P4K3 9CRA312K42 9CRA312P4K3 38 38 48 mm 222 9CRA412P4G3 9CRA412G42 9CRA412P4G3 4 4 48 mm 224 9CRA412P4J3 9CRA412J42 9CRA412J41 9CRA412P4J3 4 4 48 mm 224 9CRA412P4K3 9CRA412K42 9CRA412K41 9CRA412P4K3 4 4 48 mm 224 9CRA612PG1 9CRA612PG1 6 6 76 mm 243 9CRA612PS1 9CRA612PS1 6 6 76 mm 243 9CRA612P6G1 9CRA612P6G1 6 6 56 mm 238 9CRA612P6J1 9CRA612P6J1 6 6 56 mm 238 9CRA612P6K1 9CRA612P6K1 6 6 56 mm 238 9CRA812P8G1 9CRA812G81 9CRA812P8G1 8 8 8 mm 249 9CRA824P8G1 9CRA824P8G1 8 8 8 mm 249 9CRA848P8G1 9CRA848P8G1 8 8 8 mm 249 9CRA912PG1 9CRA912PG1 92 92 76 mm 252 9CRA948PG61 9CRA948PG61 92 92 76 mm 252 9CRB812P8G1 9CRB812P8G1 8 8 8 mm 245 9CRD412P5G3 9CRD412P5G3 4 4 56 mm 231 9CRD412P5H3 9CRD412P5H3 4 4 56 mm 231 9CRD412P5J3 9CRD412P5J3 4 4 56 mm 231 9CRD412P5M3 9CRD412P5M3 4 4 56 mm 231 9CRE412P5J3 9CRE412J52 9CRE412P5J3 4 4 56 mm 234 9CRE612PG1 9CRE612PG1 6 6 76 mm 241 9CRE812P8G1 9CRE812P8G1 8 8 8 mm 247 9CRH412P5J1 9CRH412P5J1 4 4 56 mm 227 9CRL612PG1 9CRL612PG1 6 6 76 mm No 361 9CRL812P8G1 9CRL812P8G1 8 8 8 mm No 366 9CRV412P5J21 9CRV412P5J21 4 4 56 mm 229 9EC224H1 9EC224H2 9EC224H1 9EC224HD1 ø 2 7 mm No 218 9EC248A1 9EC248A2 9EC248A1 9EC248AD1 9EC248PA1 ø 2 7 mm No 218 9EC248H1 9EC248H2 9EC248H1 ø 2 7 mm No 218 9EC248J1 9EC248J2 9EC248J1 9EC248PJ1 ø 2 7 mm No 218 9G612G11 9G612G12 9G612G11 9G612G1D1 9G612P1G3 6 6 38 mm Yes 92 9G612G111 9G612G121 9G612G111 9G612G1D11 9G612P1G11 6 6 38 mm No 92 9G612P4H1 9G612H42 9G612H4D1 9G612P4H1 6 6 25 mm Yes 73 9G612P4H11 9G612H421 9G612H411 9G612H4D11 9G612P4H11 6 6 25 mm No 73 9G612P4S1 9G612S42 9G612S41 9G612P4S1 6 6 25 mm Yes 73 9G612P4S11 9G612S421 9G612P4S11 6 6 25 mm No 73 9G612S11 9G612S12 9G612S11 9G612S1D1 6 6 38 mm Yes 92 9G612S111 9G612S121 9G612S111 6 6 38 mm No 92 9G624G11 9G624G12 9G624G11 9G624G1D1 9G624P1G3 6 6 38 mm Yes 92 9G624G111 9G624G121 9G624G111 9G624G1D11 9G624P1G31 6 6 38 mm No 92 9G624H11 9G624H12 9G624H11 9G624H1D1 6 6 38 mm Yes 92 9G624H111 9G624H121 9G624H111 6 6 38 mm No 92 9G624P4H1 9G624H42 9G624H41 9G624H4D1 9G624P4H1 6 6 25 mm Yes 73 9G624P4H11 9G624H421 9G624P4H11 6 6 25 mm No 73 9G624P4S1 9G624S42 9G624S4D1 9G624P4S1 6 6 25 mm Yes 73 9G624P4S11 9G624S421 9G624P4S11 6 6 25 mm No 73 9G624S11 9G624S12 9G624S11 9G624S1D1 6 6 38 mm Yes 92 9G624S111 9G624S121 9G624S111 6 6 38 mm No 92 9G648G11 9G648G12 9G648G11 9G648G1D1 9G648P1G1 6 6 38 mm Yes 92 9G648G111 9G648G121 9G648G111 9G648P1G11 6 6 38 mm No 92 9G648P4S1 9G648P4S1 6 6 25 mm Yes 73 548 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9G648P4S11 9G648P4S11 6 6 25 mm No 73 9G648S11 9G648S12 9G648S11 9G648S1D1 6 6 38 mm Yes 92 9G648S111 9G648S121 9G648S111 6 6 38 mm No 92 9G812G11 9G812G12 9G812G11 9G812G1D1 9G812P1G4 8 8 38 mm Yes 138 9G812G111 9G812G121 9G812G111 9G812G1D11 9G812P1G81 8 8 38 mm No 138 9G812H11 9G812H12 9G812H11 9G812H1D1 9G812P1H3 8 8 38 mm Yes 138 9G812H111 9G812H121 9G812H111 9G812H1D11 9G812P1H51 8 8 38 mm No 138 9G812K11 9G812K12 9G812K11 9G812K1D1 9G812P1K8 8 8 38 mm Yes 138 9G812K111 9G812K121 9G812K111 9G812P1K81 8 8 38 mm No 138 9G824G11 9G824G12 9G824G11 9G824G1D1 9G824P1G4 8 8 38 mm Yes 138 9G824G111 9G824G121 9G824G111 9G824G1D11 8 8 38 mm No 138 9G824H11 9G824H12 9G824H11 9G824H1D1 8 8 38 mm Yes 138 9G824H111 9G824H121 9G824H111 9G824H1D11 8 8 38 mm No 138 9G848G11 9G848G12 9G848G11 9G848G1D1 9G848P1G3 8 8 38 mm Yes 138 9G848G111 9G848G121 9G848G111 9G848G1D11 8 8 38 mm No 138 9G848H11 9G848H12 9G848H11 9G848H1D1 9G848P1H4 8 8 38 mm Yes 138 9G848H111 9G848H121 9G848H111 8 8 38 mm No 138 9G912A21 9G912A22 9G912A21 9G912A2D1 9G912P2A1 92 92 32 mm Yes 149 9G912A211 9G912A221 9G912A211 9G912A2D11 92 92 32 mm No 149 9G912G11 9G912G12 9G912G11 9G912G1D1 9G912P1G3 92 92 38 mm Yes 16 9G912G111 9G912G121 9G912G111 9G912P1G31 92 92 38 mm No 16 9G912H11 9G912H12 9G912H11 9G912H1D1 9G912P1H5 92 92 38 mm Yes 16 9G912H111 9G912H121 9G912H111 9G912H1D11 92 92 38 mm No 16 9G912H21 9G912H22 9G912H21 9G912H2D1 9G912P2H1 92 92 32 mm Yes 149 9G912H211 9G912H221 9G912H211 9G912H2D11 92 92 32 mm No 149 9G912M21 9G912M22 9G912M21 9G912M2D1 92 92 32 mm Yes 149 9G912M211 9G912M221 9G912M211 9G912M2D11 92 92 32 mm No 149 9G912S21 9G912S22 9G912S21 9G912S2D1 9G912P2S1 92 92 32 mm Yes 149 9G912S211 9G912S221 9G912S211 9G912S2D11 92 92 32 mm No 149 9G924A21 9G924A22 9G924A21 9G924A2D1 92 92 32 mm Yes 149 9G924A211 9G924A221 9G924A211 9G924A2D11 92 92 32 mm No 149 9G924G11 9G924G12 9G924G11 9G924G1D1 92 92 38 mm Yes 16 9G924G111 9G924G121 9G924G111 9G924G1D11 92 92 38 mm No 16 9G924H11 9G924H12 9G924H11 9G924H1D1 92 92 38 mm Yes 16 9G924H111 9G924H121 9G924H111 9G924H1D11 92 92 38 mm No 16 9G924H21 9G924H22 9G924H21 9G924H2D1 92 92 32 mm Yes 149 9G924H211 9G924H221 9G924H211 9G924H2D11 92 92 32 mm No 149 9G924M21 9G924M22 9G924M21 9G924M2D1 92 92 32 mm Yes 149 9G924M211 9G924M221 9G924M211 9G924M2D11 92 92 32 mm No 149 9G924S21 9G924S22 9G924S21 9G924S2D1 92 92 32 mm Yes 149 9G924S211 9G924S221 9G924S211 9G924S2D11 92 92 32 mm No 149 9G948A21 9G948A22 9G948A21 9G948A2D1 92 92 32 mm Yes 149 9G948A211 9G948A221 9G948A211 9G948A2D11 92 92 32 mm No 149 9G948G11 9G948G12 9G948G11 9G948G1D1 92 92 38 mm Yes 16 9G948G111 9G948G121 9G948G111 92 92 38 mm No 16 9G948H11 9G948H12 9G948H11 9G948H1D1 92 92 38 mm Yes 16 9G948H111 9G948H111 92 92 38 mm No 16 9G948H21 9G948H22 9G948H21 9G948H2D1 92 92 32 mm Yes 149 9G948H211 9G948H221 9G948H211 9G948H2D11 92 92 32 mm No 149 9G948J11 9G948J11 92 92 38 mm Yes 16 9G948J111 9G948J111 9G948P1J31 92 92 38 mm No 16 9G948M21 9G948M22 9G948M21 9G948M2D1 92 92 32 mm Yes 149 9G948M211 9G948M221 9G948M211 9G948M2D11 92 92 32 mm No 149 9G948S21 9G948S22 9G948S21 9G948S2D1 92 92 32 mm Yes 149 9G948S211 9G948S221 9G948S211 9G948S2D11 92 92 32 mm No 149 9G1212A41 9G1212A42 9G1212A41 9G1212A4D1 12 12 25 mm Yes 172 9G1212A411 9G1212A421 9G1212A411 9G1212A4D11 12 12 25 mm No 172 9G1212B41 9G1212B41 12 12 25 mm Yes 172 9G1212B411 9G1212B411 12 12 25 mm No 172 9G1212E11 9G1212E12 9G1212E11 9G1212E1D1 12 12 38 mm Yes 182 9G1212E111 9G1212E121 9G1212E111 9G1212E1D11 12 12 38 mm No 182 Index by Model No. Please contact your point of sale regarding low-speed sensors. 549
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9G1212E41 9G1212E42 9G1212E41 9G1212E4D1 9G1212P4E5 12 12 25 mm Yes 172 9G1212E411 9G1212E421 9G1212E411 9G1212E4D11 9G1212P4E41 12 12 25 mm No 172 9G1212F11 9G1212F12 9G1212F11 12 12 38 mm Yes 182 9G1212F111 9G1212F121 9G1212F111 12 12 38 mm No 182 9G1212F41 9G1212F42 9G1212F41 9G1212F4D1 12 12 25 mm Yes 172 9G1212F411 9G1212F421 9G1212F411 9G1212F4D11 12 12 25 mm No 172 9G1212G11 9G1212G12 9G1212G11 9G1212G1D1 9G1212P1G4 12 12 38 mm Yes 182 9G1212G111 9G1212G121 9G1212G111 9G1212G1D11 9G1212P1G81 12 12 38 mm No 182 9G1212G41 9G1212G42 9G1212G41 9G1212G4D1 9G1212P4G3 12 12 25 mm Yes 172 9G1212G411 9G1212G421 9G1212G411 9G1212G4D11 9G1212P4G31 12 12 25 mm No 172 9G1212H11 9G1212H12 9G1212H11 9G1212H1D1 12 12 38 mm Yes 182 9G1212H111 9G1212H121 9G1212H111 9G1212H1D11 12 12 38 mm No 182 9G1212H41 9G1212H42 9G1212H41 9G1212H4D1 9G1212P4H4 12 12 25 mm Yes 172 9G1212H411 9G1212H421 9G1212H411 9G1212H4D11 9G1212P4H91 12 12 25 mm No 172 9G1212M11 9G1212M12 9G1212M11 9G1212M1D1 12 12 38 mm Yes 182 9G1212M111 9G1212M121 9G1212M111 9G1212M1D11 12 12 38 mm No 182 9G1212M41 9G1212M42 9G1212M41 9G1212M4D1 12 12 25 mm Yes 172 9G1212M411 9G1212M421 9G1212M411 9G1212M4D11 12 12 25 mm No 172 9G1224A41 9G1224A42 9G1224A41 9G1224A4D1 12 12 25 mm Yes 172 9G1224A411 9G1224A421 9G1224A411 9G1224A4D11 12 12 25 mm No 172 9G1224E11 9G1224E12 9G1224E11 9G1224E1D1 12 12 38 mm Yes 182 9G1224E111 9G1224E121 9G1224E111 9G1224E1D11 12 12 38 mm No 182 9G1224E41 9G1224E42 9G1224E41 9G1224E4D1 9G1224P4E1 12 12 25 mm Yes 172 9G1224E411 9G1224E421 9G1224E411 9G1224E4D11 12 12 25 mm No 172 9G1224F11 9G1224F12 9G1224F11 9G1224F1D1 12 12 38 mm Yes 182 9G1224F111 9G1224F121 9G1224F111 12 12 38 mm No 182 9G1224F41 9G1224F42 9G1224F41 9G1224F4D1 12 12 25 mm Yes 172 9G1224F411 9G1224F421 9G1224F411 9G1224F4D11 12 12 25 mm No 172 9G1224G11 9G1224G12 9G1224G11 9G1224G1D1 9G1224P1G1 12 12 38 mm Yes 182 9G1224G111 9G1224G121 9G1224G111 9G1224G1D11 12 12 38 mm No 182 9G1224G41 9G1224G42 9G1224G41 9G1224G4D1 12 12 25 mm Yes 172 9G1224G411 9G1224G421 9G1224G411 9G1224G4D11 12 12 25 mm No 172 9G1224H11 9G1224H12 9G1224H11 9G1224H1D1 12 12 38 mm Yes 182 9G1224H111 9G1224H121 9G1224H111 9G1224H1D11 12 12 38 mm No 182 9G1224H41 9G1224H42 9G1224H41 9G1224H4D1 12 12 25 mm Yes 172 9G1224H411 9G1224H421 9G1224H411 9G1224H4D11 12 12 25 mm No 172 9G1224M11 9G1224M12 9G1224M11 9G1224M1D1 12 12 38 mm Yes 182 9G1224M111 9G1224M121 9G1224M111 9G1224M1D11 12 12 38 mm No 182 9G1224M41 9G1224M42 9G1224M41 9G1224M4D1 12 12 25 mm Yes 172 9G1224M411 9G1224M421 9G1224M411 9G1224M4D11 12 12 25 mm No 172 9G1248A41 9G1248A42 9G1248A41 9G1248A4D1 12 12 25 mm Yes 172 9G1248A411 9G1248A421 9G1248A411 9G1248A4D11 12 12 25 mm No 172 9G1248E11 9G1248E12 9G1248E11 9G1248E1D1 12 12 38 mm Yes 182 9G1248E111 9G1248E121 9G1248E111 9G1248E1D11 12 12 38 mm No 182 9G1248E41 9G1248E42 9G1248E41 9G1248E4D1 9G1248P4E5 12 12 25 mm Yes 172 9G1248E411 9G1248E421 9G1248E411 9G1248E4D11 12 12 25 mm No 172 9G1248F11 9G1248F12 9G1248F11 9G1248F1D1 12 12 38 mm Yes 182 9G1248F111 9G1248F121 9G1248F111 12 12 38 mm No 182 9G1248F41 9G1248F42 9G1248F41 9G1248F4D1 12 12 25 mm Yes 172 9G1248F411 9G1248F421 9G1248F411 9G1248F4D11 12 12 25 mm No 172 9G1248G11 9G1248G12 9G1248G11 9G1248G1D1 9G1248P1G4 12 12 38 mm Yes 182 9G1248G111 9G1248G121 9G1248G111 9G1248G1D11 9G1248P1G41 12 12 38 mm No 182 9G1248G41 9G1248G42 9G1248G41 9G1248G4D1 9G1248P4G4 12 12 25 mm Yes 172 9G1248G411 9G1248G421 9G1248G411 9G1248G4D11 12 12 25 mm No 172 9G1248H11 9G1248H12 9G1248H11 9G1248H1D1 12 12 38 mm Yes 182 9G1248H111 9G1248H121 9G1248H111 9G1248H1D11 12 12 38 mm No 182 9G1248H41 9G1248H42 9G1248H41 9G1248H4D1 12 12 25 mm Yes 172 9G1248H411 9G1248H421 9G1248H411 9G1248H4D11 12 12 25 mm No 172 9G1248M11 9G1248M12 9G1248M11 9G1248M1D1 12 12 38 mm Yes 182 9G1248M111 9G1248M121 9G1248M111 9G1248M1D11 12 12 38 mm No 182 9G1248M41 9G1248M42 9G1248M41 9G1248M4D1 12 12 25 mm Yes 172 55 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9G1248M411 9G1248M421 9G1248M411 9G1248M4D11 12 12 25 mm No 172 9GA312P3G1 9GA312G31 9GA312P3G1 38 38 28 mm Yes 14 9GA312P3G11 9GA312P3G11 38 38 28 mm No 14 9GA312P3J1 9GA312J31 9GA312P3J1 38 38 28 mm Yes 14 9GA312P3J11 9GA312P3J11 38 38 28 mm No 14 9GA312P3K1 9GA312K31 9GA312P3K1 38 38 28 mm Yes 14 9GA312P3K11 9GA312K3D11 9GA312P3K11 38 38 28 mm No 14 9GA45P6F1 9GA45F62 9GA45F61 9GA45P6F1 4 4 2 mm Yes 26 9GA45P6H1 9GA45H62 9GA45H61 9GA45P6H1 4 4 2 mm Yes 26 9GA412G71 9GA412G72 9GA412G71 9GA412G7D1 9GA412P7G1 4 4 15 mm Yes 21 9GA412H71 9GA412H72 9GA412H71 9GA412H7D1 4 4 15 mm Yes 21 9GA412P3G1 9GA412G32 9GA412G31 9GA412P3G1 4 4 28 mm Yes 38 9GA412P3G11 9GA412G321 9GA412G311 9GA412P3G11 4 4 28 mm No 38 9GA412P3H1 9GA412H32 9GA412H31 9GA412H3D1 9GA412P3H1 4 4 28 mm Yes 38 9GA412P3H11 9GA412H321 9GA412H311 9GA412H3D11 9GA412P3H11 4 4 28 mm No 38 9GA412P3J1 9GA412J32 9GA412J31 9GA412J3D1 9GA412P3J1 4 4 28 mm Yes 38 9GA412P3J11 9GA412J321 9GA412J311 9GA412P3J11 4 4 28 mm No 38 9GA412P3K1 9GA412K32 9GA412K31 9GA412K3D1 9GA412P3K1 4 4 28 mm Yes 38 9GA412P3K11 9GA412K321 9GA412K311 9GA412P3K11 4 4 28 mm No 38 9GA412P3M1 9GA412M32 9GA412M31 9GA412M3D1 9GA412P3M1 4 4 28 mm Yes 38 9GA412P3M11 9GA412M321 9GA412M311 9GA412P3M11 4 4 28 mm No 38 9GA412P6F1 9GA412F62 9GA412F61 9GA412P6F1 4 4 2 mm Yes 26 9GA412P6G1 9GA412G62 9GA412G61 9GA412P6G1 4 4 2 mm Yes 26 9GA412P6H1 9GA412H62 9GA412H61 9GA412P6H1 4 4 2 mm Yes 26 9GA412P7G1 9GA412G72 9GA412G71 9GA412G7D1 9GA412P7G1 4 4 15 mm Yes 21 9GA424P3G1 9GA424G32 9GA424G31 9GA424G3D1 9GA424P3G1 4 4 28 mm Yes 38 9GA424P3G11 9GA424G321 9GA424G311 9GA424P3G11 4 4 28 mm No 38 9GA424P3H1 9GA424H32 9GA424H31 9GA424H3D1 9GA424P3H1 4 4 28 mm Yes 38 9GA424P3H11 9GA424H321 9GA424H311 9GA424P3H11 4 4 28 mm No 38 9GA424P3J1 9GA424J32 9GA424J31 9GA424J3D1 9GA424P3J1 4 4 28 mm Yes 38 9GA424P3J11 9GA424J321 9GA424J311 9GA424P3J11 4 4 28 mm No 38 9GA424P3M1 9GA424M32 9GA424M31 9GA424P3M1 4 4 28 mm Yes 38 9GA424P3M11 9GA424M321 9GA424M311 9GA424M3D1 9GA424P3M11 4 4 28 mm No 38 9GA424P6F1 9GA424F62 9GA424F61 9GA424P6F1 4 4 2 mm Yes 26 9GA424P6G1 9GA424G62 9GA424G61 9GA424G6D1 9GA424P6G1 4 4 2 mm Yes 26 9GA424P6H1 9GA424H62 9GA424H61 9GA424H6D1 9GA424P6H1 4 4 2 mm Yes 26 9GA512P7A1 9GA512A72 9GA512A71 9GA512P7A1 52 52 15 mm Yes 5 9GA512P7G1 9GA512G72 9GA512G71 9GA512P7G1 52 52 15 mm Yes 5 9GA512P7H1 9GA512H72 9GA512H71 9GA512H7D1 9GA512P7H1 52 52 15 mm Yes 5 9GA512P7M1 9GA512M72 9GA512M71 9GA512P7M1 52 52 15 mm Yes 5 9GA524P7A1 9GA524A72 9GA524A71 9GA524P7A1 52 52 15 mm Yes 5 9GA524P7G1 9GA524G72 9GA524G71 9GA524G7D1 9GA524P7G1 52 52 15 mm Yes 5 9GA524P7H1 9GA524H72 9GA524H71 9GA524P7H1 52 52 15 mm Yes 5 9GA524P7M1 9GA524M72 9GA524M71 9GA524P7M1 52 52 15 mm Yes 5 9GA612G71 9GA612G72 9GA612G71 9GA612G7D1 9GA612P7G1 6 6 15 mm Yes 59 9GA612G91 9GA612G92 9GA612G91 9GA612G9D1 9GA612P9G1 6 6 1 mm Yes 57 9GA612H61 9GA612H62 9GA612H61 9GA612H6D1 6 6 2 mm Yes 65 9GA612H71 9GA612H72 9GA612H71 9GA612H7D1 9GA612P7H1 6 6 15 mm Yes 59 9GA612H91 9GA612H92 9GA612H91 9GA612H9D1 6 6 1 mm Yes 57 9GA612L71 9GA612L72 9GA612L71 9GA612L7D1 6 6 15 mm Yes 59 9GA612L91 9GA612L92 9GA612L91 9GA612L9D1 6 6 1 mm Yes 57 9GA612M61 9GA612M62 9GA612M61 9GA612M6D1 6 6 2 mm Yes 65 9GA612M71 9GA612M72 9GA612M71 6 6 15 mm Yes 59 9GA612P1H3 9GA612H12 9GA612H11 9GA612P1H3 6 6 38 mm Yes 85 9GA612P1H31 9GA612H121 9GA612H111 9GA612P1H31 6 6 38 mm No 85 9GA612P1J3 9GA612J12 9GA612J11 9GA612J1D1 9GA612P1J3 6 6 38 mm Yes 85 9GA612P1J31 9GA612J121 9GA612J111 9GA612P1J31 6 6 38 mm No 85 9GA612P1K3 9GA612K12 9GA612K11 9GA612K1D11 9GA612P1K3 6 6 38 mm Yes 85 9GA612P1K31 9GA612K121 9GA612K111 9GA612P1K31 6 6 38 mm No 85 9GA612P1K6 9GA612P1K6 6 6 38 mm Yes 85 9GA612P1K61 9GA612P1K61 6 6 38 mm No 85 Index by Model No. Please contact your point of sale regarding low-speed sensors. 551
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9GA612P6G1 9GA612G62 9GA612G61 9GA612P6G1 6 6 2 mm Yes 65 9GA612P6S1 9GA612S62 9GA612S61 9GA612P6S1 6 6 2 mm Yes 65 9GA612P7G1 9GA612G72 9GA612G71 9GA612G7D1 9GA612P7G1 6 6 15 mm Yes 59 9GA612P7H1 9GA612H72 9GA612H71 9GA612H7D1 9GA612P7H1 6 6 15 mm Yes 59 9GA624H61 9GA624H62 9GA624H61 9GA624H6D1 6 6 2 mm Yes 65 9GA624M61 9GA624M62 9GA624M61 9GA624M6D1 6 6 2 mm Yes 65 9GA624M71 9GA624M72 9GA624M71 6 6 15 mm Yes 59 9GA624P1J3 9GA624J12 9GA624J11 9GA624P1J3 6 6 38 mm Yes 85 9GA624P1J31 9GA624J121 9GA624J111 9GA624P1J31 6 6 38 mm No 85 9GA624P1K3 9GA624P1K3 6 6 38 mm Yes 85 9GA624P1K31 9GA624P1K31 6 6 38 mm No 85 9GA624P6G1 9GA624G62 9GA624G61 9GA624P6G1 6 6 2 mm Yes 65 9GA624P6S1 9GA624S62 9GA624P6S1 6 6 2 mm Yes 65 9GA624P7G1 9GA624G72 9GA624P7G1 6 6 15 mm Yes 59 9GA712P1G1 9GA712P1G1 7 7 38 mm Yes 95 9GA712P1G11 9GA712P1G11 7 7 38 mm No 95 9GA712P1H1 9GA712P1H1 7 7 38 mm Yes 95 9GA712P1H11 9GA712P1H11 7 7 38 mm No 95 9GA812H71 9GA812H71 9GA812H7D1 8 8 15 mm Yes 97 9GA812P1G61 9GA812P1G61 8 8 38 mm Yes 131 9GA812P1G611 9GA812P1G611 8 8 38 mm No 131 9GA812P1H61 9GA812H162 9GA812H161 9GA812H1D61 9GA812P1H61 8 8 38 mm Yes 131 9GA812P1H611 9GA812H1621 9GA812H1611 9GA812P1H611 8 8 38 mm No 131 9GA812P1S61 9GA812S162 9GA812S161 9GA812S1D61 9GA812P1S61 8 8 38 mm Yes 131 9GA812P1S611 9GA812S1621 9GA812S1611 9GA812P1S611 8 8 38 mm No 131 9GA812P2H1 9GA812P2H1 8 8 32 mm Yes 123 9GA812P2H11 9GA812P2H11 8 8 32 mm No 123 9GA812P2M1 9GA812P2M1 8 8 32 mm Yes 123 9GA812P2M11 9GA812P2M11 8 8 32 mm No 123 9GA812P2S1 9GA812S21 9GA812P2S1 8 8 32 mm Yes 123 9GA812P2S11 9GA812P2S11 8 8 32 mm No 123 9GA812P4G1 9GA812G42 9GA812G41 9GA812P4G1 8 8 25 mm Yes 18 9GA812P4G11 9GA812G421 9GA812G411 9GA812P4G11 8 8 25 mm No 18 9GA812P4H1 9GA812H42 9GA812H41 9GA812H4D1 9GA812P4H1 8 8 25 mm Yes 18 9GA812P4H11 9GA812H421 9GA812H411 9GA812P4H11 8 8 25 mm No 18 9GA812P4J1 9GA812J42 9GA812J41 9GA812J4D1 9GA812P4J1 8 8 25 mm Yes 18 9GA812P4J11 9GA812J421 9GA812J411 9GA812P4J11 8 8 25 mm No 18 9GA812P6G1 9GA812G62 9GA812G61 9GA812P6G1 8 8 2 mm Yes 12 9GA812P6M1 9GA812M62 9GA812M61 9GA812P6M1 8 8 2 mm Yes 12 9GA812P7G1 9GA812P7G1 8 8 15 mm Yes 97 9GA812P7S1 9GA812P7S1 8 8 15 mm Yes 97 9GA824H71 9GA824H72 9GA824H71 9GA824H7D1 8 8 15 mm Yes 97 9GA824P1H61 9GA824H162 9GA824H161 9GA824H1D61 9GA824P1H61 8 8 38 mm Yes 131 9GA824P1H611 9GA824H1621 9GA824H1611 9GA824P1H611 8 8 38 mm No 131 9GA824P1S61 9GA824S162 9GA824S161 9GA824P1S61 8 8 38 mm Yes 131 9GA824P1S611 9GA824S1621 9GA824S1611 9GA824P1S611 8 8 38 mm No 131 9GA824P2S1 9GA824S22 9GA824P2S1 8 8 32 mm Yes 123 9GA824P2S11 9GA824P2S11 8 8 32 mm No 123 9GA824P4G1 9GA824G42 9GA824G41 9GA824P4G1 8 8 25 mm Yes 18 9GA824P4G11 9GA824G421 9GA824G411 9GA824P4G11 8 8 25 mm No 18 9GA824P4H1 9GA824H42 9GA824H41 9GA824H4D1 9GA824P4H1 8 8 25 mm Yes 18 9GA824P4H11 9GA824H421 9GA824H411 9GA824P4H11 8 8 25 mm No 18 9GA824P4J1 9GA824J42 9GA824J41 9GA824J4D1 9GA824P4J1 8 8 25 mm Yes 18 9GA824P4J11 9GA824J421 9GA824J411 9GA824J4D11 9GA824P4J11 8 8 25 mm No 18 9GA824P6G1 9GA824G62 9GA824G61 9GA824P6G1 8 8 2 mm Yes 12 9GA824P6M1 9GA824M62 9GA824M61 9GA824P6M1 8 8 2 mm Yes 12 9GA824P7G1 9GA824G7D1 9GA824P7G1 8 8 15 mm Yes 97 9GA824P7S1 9GA824P7S1 8 8 15 mm Yes 97 9GA848P1S61 9GA848P1S61 8 8 38 mm Yes 131 9GA848P1S611 9GA848P1S611 8 8 38 mm No 131 9GA848P2S1 9GA848P2S1 8 8 32 mm Yes 123 552 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9GA848P2S11 9GA848P2S11 8 8 32 mm No 123 9GA912P1H3 9GA912H12 9GA912H11 9GA912H1D1 9GA912P1H3 92 92 38 mm Yes 152 9GA912P1H31 9GA912H121 9GA912H111 9GA912P1H31 92 92 38 mm No 152 9GA912P4G3 9GA912G42 9GA912G41 9GA912G4D1 9GA912P4G3 92 92 25 mm Yes 141 9GA912P4G31 9GA912G421 9GA912G411 9GA912P4G31 92 92 25 mm No 141 9GA912P4J3 9GA912J42 9GA912J41 9GA912J4D1 9GA912P4J3 92 92 25 mm Yes 141 9GA912P4J31 9GA912J421 9GA912J411 9GA912P4J31 92 92 25 mm No 141 9GA912P4S3 9GA912S42 9GA912S41 9GA912P4S3 92 92 25 mm Yes 141 9GA912P4S31 9GA912S421 9GA912S411 9GA912P4S31 92 92 25 mm No 141 9GA924P1H1 9GA924H12 9GA924H11 9GA924H1D1 9GA924P1H1 92 92 38 mm Yes 152 9GA924P1H11 9GA924H111 9GA924H1D11 9GA924P1H11 92 92 38 mm No 152 9GA924P4G3 9GA924G42 9GA924G41 9GA924G4D1 9GA924P4G3 92 92 25 mm Yes 141 9GA924P4G31 9GA924G421 9GA924G411 9GA924P4G31 92 92 25 mm No 141 9GA924P4J3 9GA924J42 9GA924J41 9GA924J4D1 9GA924P4J3 92 92 25 mm Yes 141 9GA924P4J31 9GA924J421 9GA924J411 9GA924P4J31 92 92 25 mm No 141 9GA924P4S3 9GA924S42 9GA924S41 9GA924P4S3 92 92 25 mm Yes 141 9GA924P4S31 9GA924S421 9GA924S411 9GA924P4S31 92 92 25 mm No 141 9GA948P1H3 9GA948H12 9GA948H11 9GA948P1H3 92 92 38 mm Yes 152 9GA948P1H31 9GA948P1H31 92 92 38 mm No 152 9GA1212G41 9GA1212G41 9GA1212P4G1 12 12 25 mm Yes 165 9GA1212G411 9GA1212G411 9GA1212P4G11 12 12 25 mm No 165 9GA1212P4G1 9GA1212G41 9GA1212P4G1 12 12 25 mm Yes 165 9GA1212P4G11 9GA1212G411 9GA1212P4G11 12 12 25 mm No 165 9GA1212P4S1 9GA1212S41 9GA1212P4S1 12 12 25 mm Yes 165 9GA1212P4S11 9GA1212S411 9GA1212P4S11 12 12 25 mm No 165 9GA1212S41 9GA1212S41 9GA1212P4S1 12 12 25 mm Yes 165 9GA1212S411 9GA1212S411 9GA1212P4S11 12 12 25 mm No 165 9GA1224G41 9GA1224G42 9GA1224G41 9GA1224G4D1 9GA1224P4G1 12 12 25 mm Yes 165 9GA1224G411 9GA1224G411 9GA1224P4G11 12 12 25 mm No 165 9GA1224P4G1 9GA1224G42 9GA1224G41 9GA1224G4D1 9GA1224P4G1 12 12 25 mm Yes 165 9GA1224P4G11 9GA1224G411 9GA1224P4G11 12 12 25 mm No 165 9GA1224P4S1 9GA1224S41 9GA1224P4S1 12 12 25 mm Yes 165 9GA1224P4S11 9GA1224S411 9GA1224P4S11 12 12 25 mm No 165 9GA1224S41 9GA1224S41 9GA1224P4S1 12 12 25 mm Yes 165 9GA1224S411 9GA1224S411 9GA1224P4S11 12 12 25 mm No 165 9GA1248G41 9GA1248G41 9GA1248P4G1 12 12 25 mm Yes 165 9GA1248G411 9GA1248G411 9GA1248P4G11 12 12 25 mm No 165 9GA1248P4G1 9GA1248G41 9GA1248P4G1 12 12 25 mm Yes 165 9GA1248P4G11 9GA1248G411 9GA1248P4G11 12 12 25 mm No 165 9GA1248P4S1 9GA1248S41 9GA1248P4S1 12 12 25 mm Yes 165 9GA1248P4S11 9GA1248S411 9GA1248P4S11 12 12 25 mm No 165 9GA1248S41 9GA1248S41 9GA1248P4S1 12 12 25 mm Yes 165 9GA1248S411 9GA1248S411 9GA1248P4S11 12 12 25 mm No 165 9GAX412P3K1 9GAX412P3K1 4 4 28 mm Yes 35 9GAX412P3K11 9GAX412P3K11 4 4 28 mm No 35 9GAX412P3K3 9GAX412P3K3 4 4 28 mm Yes 35 9GAX412P3K31 9GAX412P3K31 4 4 28 mm No 35 9GAX412P3S1 9GAX412P3S1 4 4 28 mm Yes 35 9GAX412P3S11 9GAX412P3S11 4 4 28 mm No 35 9GAX412P3S3 9GAX412P3S3 4 4 28 mm Yes 35 9GAX412P3S31 9GAX412P3S31 4 4 28 mm No 35 9GE412P3G3 9GE412G3D1 9GE412P3G3 4 4 28 mm No 42 9GE412P3J3 9GE412J31 9GE412J3D1 9GE412P3J3 4 4 28 mm No 42 9GE412P3K3 9GE412K31 9GE412K3D1 9GE412P3K3 4 4 28 mm No 42 9GL1212E11 9GL1212E12 9GL1212E11 9GL1212E1D1 12 12 38 mm No 379 9GL1212F11 9GL1212F12 9GL1212F11 9GL1212F1D1 12 12 38 mm No 379 9GL1212G11 9GL1212G12 9GL1212G11 9GL1212G1D1 12 12 38 mm No 379 9GL1212H11 9GL1212H12 9GL1212H11 9GL1212H1D1 12 12 38 mm No 379 9GL1212M11 9GL1212M12 9GL1212M11 9GL1212M1D1 12 12 38 mm No 379 9GL1224E11 9GL1224E12 9GL1224E11 9GL1224E1D1 12 12 38 mm No 379 9GL1224F11 9GL1224F12 9GL1224F11 9GL1224F1D1 12 12 38 mm No 379 Index by Model No. Please contact your point of sale regarding low-speed sensors. 553
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9GL1224G11 9GL1224G12 9GL1224G11 9GL1224G1D1 12 12 38 mm No 379 9GL1224H11 9GL1224H12 9GL1224H11 9GL1224H1D1 12 12 38 mm No 379 9GL1224M11 9GL1224M12 9GL1224M11 9GL1224M1D1 12 12 38 mm No 379 9GL1248E11 9GL1248E12 9GL1248E11 9GL1248E1D1 12 12 38 mm No 379 9GL1248F11 9GL1248F12 9GL1248F11 9GL1248F1D1 12 12 38 mm No 379 9GL1248G11 9GL1248G12 9GL1248G11 9GL1248G1D1 12 12 38 mm No 379 9GL1248H11 9GL1248H12 9GL1248H11 9GL1248H1D1 12 12 38 mm No 379 9GL1248M11 9GL1248M12 9GL1248M11 9GL1248M1D1 12 12 38 mm No 379 9GP1224P1G1 9GP1224P1G1 12 12 38 mm No 48 9GP1248P1G1 9GP1248P1G1 12 12 38 mm No 48 9GP5724P5H1 9GP5724P5H1 ø 172 15 51 mm No 41 9GP5748P5G1 9GP5748P5G1 ø 172 15 51 mm No 41 9GT412P3J1 9GT412J32 9GT412J31 9GT412J3D1 9GT412P3J1 4 4 28 mm No 394 9GT424P3J1 9GT424J32 9GT424J31 9GT424J3D1 9GT424P3J1 4 4 28 mm No 394 9GT612P4G1 9GT612G42 9GT612G41 9GT612G4D1 9GT612P4G1 6 6 25 mm No 396 9GT624P4G1 9GT624G42 9GT624G41 9GT624P4G1 6 6 25 mm No 396 9GT812P4S1 9GT812S42 9GT812S41 9GT812S4D1 9GT812P4S1 8 8 25 mm No 398 9GT824P4S1 9GT824S42 9GT824S41 9GT824P4S1 8 8 25 mm No 398 9GT912P1M1 9GT912M12 9GT912M11 9GT912M1D1 9GT912P1M1 92 92 38 mm No 42 9GT912P4J1 9GT912J42 9GT912J41 9GT912J4D1 9GT912P4J1 92 92 25 mm No 4 9GT924P1M1 9GT924M12 9GT924M1D1 9GT924P1M1 92 92 38 mm No 42 9GT924P4J1 9GT924J42 9GT924J41 9GT924P4J1 92 92 25 mm No 4 9GT1212P1S1 9GT1212P1S1 12 12 38 mm No 44 9GT1224P1S1 9GT1224S12 9GT1224S1D1 9GT1224P1S1 12 12 38 mm No 44 9GV312E31 9GV312E32 9GV312E31 9GV312E3D1 38 38 28 mm Yes 17 9GV312E311 9GV312E311 9GV312E3D11 38 38 28 mm No 17 9GV312G31 9GV312G32 9GV312G31 9GV312G3D1 9GV312P3G3 38 38 28 mm Yes 17 9GV312G311 9GV312G321 9GV312G311 38 38 28 mm No 17 9GV312H31 9GV312H32 9GV312H31 9GV312H3D1 38 38 28 mm Yes 17 9GV312H311 9GV312H311 38 38 28 mm No 17 9GV312J31 9GV312J32 9GV312J31 9GV312J3D1 9GV312P3J3 38 38 28 mm Yes 17 9GV312J311 9GV312J321 9GV312J311 9GV312P3J31 38 38 28 mm No 17 9GV312K31 9GV312K31 9GV312K3D1 9GV312P3K1 38 38 28 mm Yes 17 9GV312K311 9GV312K311 9GV312K3D11 38 38 28 mm No 17 9GV412C31 9GV412C31 9GV412C3D1 4 4 28 mm Yes 45 9GV412C311 9GV412C311 9GV412C3D11 4 4 28 mm No 45 9GV412G31 9GV412G32 9GV412G31 9GV412G3D1 9GV412P3G3 4 4 28 mm Yes 45 9GV412G311 9GV412G321 9GV412G311 9GV412G3D11 9GV412P3G31 4 4 28 mm No 45 9GV412H31 9GV412H31 9GV412H3D1 9GV412P3H1 4 4 28 mm Yes 45 9GV412H311 9GV412H311 4 4 28 mm No 45 9GV412J31 9GV412J32 9GV412J31 9GV412J3D1 9GV412P3J3 4 4 28 mm Yes 45 9GV412J311 9GV412J321 9GV412J311 9GV412J3D11 9GV412P3J31 4 4 28 mm No 45 9GV412K31 9GV412K32 9GV412K31 9GV412K3D1 9GV412P3K3 4 4 28 mm Yes 45 9GV412K311 9GV412K311 4 4 28 mm No 45 9GV612P1G3 9GV612G12 9GV612G11 9GV612G1D1 9GV612P1G3 6 6 38 mm Yes 88 9GV612P1G31 9GV612G121 9GV612G111 9GV612G1D11 9GV612P1G31 6 6 38 mm No 88 9GV612P1H3 9GV612H12 9GV612H11 9GV612H1D1 9GV612P1H3 6 6 38 mm Yes 88 9GV612P1H31 9GV612H121 9GV612H111 9GV612H1D11 9GV612P1H31 6 6 38 mm No 88 9GV612P1L1 9GV612L12 9GV612P1L1 6 6 38 mm Yes 88 9GV612P1L11 9GV612L121 9GV612L111 9GV612L1D11 9GV612P1L11 6 6 38 mm No 88 9GV612P1M3 9GV612M12 9GV612M11 9GV612M1D1 9GV612P1M3 6 6 38 mm Yes 88 9GV612P1M31 9GV612M111 9GV612M1D11 9GV612P1M31 6 6 38 mm No 88 9GV624P1G3 9GV624G12 9GV624G1D1 9GV624P1G3 6 6 38 mm Yes 88 9GV624P1G31 9GV624G121 9GV624P1G31 6 6 38 mm No 88 9GV624P1M3 9GV624M12 9GV624M11 9GV624P1M3 6 6 38 mm Yes 88 9GV624P1M31 9GV624P1M31 6 6 38 mm No 88 9GV648P1H3 9GV648P1H3 6 6 38 mm Yes 88 9GV648P1H31 9GV648P1H31 6 6 38 mm No 88 9GV812P1F3 9GV812P1F3 8 8 38 mm Yes 135 9GV812P1F31 9GV812P1F31 8 8 38 mm No 135 9GV812P1G3 9GV812G12 9GV812G11 9GV812P1G3 8 8 38 mm Yes 135 554 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9GV812P1G31 9GV812G121 9GV812G111 9GV812P1G31 8 8 38 mm No 135 9GV812P1H3 9GV812H12 9GV812H11 9GV812P1H3 8 8 38 mm Yes 135 9GV812P1H31 9GV812H121 9GV812H111 9GV812P1H31 8 8 38 mm No 135 9GV812P1M3 9GV812P1M3 8 8 38 mm Yes 135 9GV812P1M31 9GV812P1M31 8 8 38 mm No 135 9GV812P4J3 9GV812J42 9GV812J41 9GV812P4J3 8 8 25 mm Yes 114 9GV812P4J31 9GV812J421 9GV812J411 9GV812P4J31 8 8 25 mm No 114 9GV812P4K3 9GV812K41 9GV812K4D1 9GV812P4K3 8 8 25 mm Yes 114 9GV812P4K31 9GV812K421 9GV812K411 9GV812K4D11 9GV812P4K31 8 8 25 mm No 114 9GV824P1G3 9GV824G12 9GV824G11 9GV824P1G3 8 8 38 mm Yes 135 9GV824P1G31 9GV824P1G31 8 8 38 mm No 135 9GV824P4K1 9GV824K42 9GV824K41 9GV824P4K1 8 8 25 mm Yes 114 9GV824P4K11 9GV824P4K11 8 8 25 mm No 114 9GV848P1G3 9GV848G12 9GV848G11 9GV848P1G3 8 8 38 mm Yes 135 9GV848P1G31 9GV848G111 9GV848P1G31 8 8 38 mm No 135 9GV848P4K3 9GV848K41 9GV848P4K3 8 8 25 mm Yes 114 9GV848P4K31 9GV848P4K31 8 8 25 mm No 114 9GV912P1F3 9GV912P1F3 92 92 38 mm Yes 157 9GV912P1F31 9GV912P1F31 92 92 38 mm No 157 9GV912P1G3 9GV912P1G3 92 92 38 mm Yes 157 9GV912P1G31 9GV912P1G31 92 92 38 mm No 157 9GV912P1H3 9GV912H12 9GV912H1D1 9GV912P1H3 92 92 38 mm Yes 157 9GV912P1H31 9GV912P1H31 92 92 38 mm No 157 9GV948P1F3 9GV948P1F3 92 92 38 mm Yes 157 9GV948P1F31 9GV948P1F31 92 92 38 mm No 157 9GV948P1H3 9GV948H12 9GV948H11 9GV948P1H3 92 92 38 mm Yes 157 9GV948P1H31 9GV948H121 9GV948P1H31 92 92 38 mm No 157 9GV1212P1G1 9GV1212P1G1 12 12 38 mm Yes 179 9GV1212P1G11 9GV1212G111 9GV1212G1D11 9GV1212P1G11 12 12 38 mm No 179 9GV1212P1J1 9GV1212J12 9GV1212J11 9GV1212J1D1 9GV1212P1J1 12 12 38 mm Yes 179 9GV1212P1J11 9GV1212J121 9GV1212J111 9GV1212P1J11 12 12 38 mm No 179 9GV1212P4G1 9GV1212G42 9GV1212G41 9GV1212P4G1 12 12 25 mm Yes 169 9GV1212P4G11 9GV1212G421 9GV1212G411 9GV1212P4G11 12 12 25 mm No 169 9GV1224P1H1 9GV1224H12 9GV1224H11 9GV1224H1D1 9GV1224P1H1 12 12 38 mm Yes 179 9GV1224P1H11 9GV1224H121 9GV1224H111 9GV1224H1D11 9GV1224P1H11 12 12 38 mm No 179 9GV1224P1J1 9GV1224J12 9GV1224J11 9GV1224J1D1 9GV1224P1J1 12 12 38 mm Yes 179 9GV1224P1J11 9GV1224J121 9GV1224J111 9GV1224J1D11 9GV1224P1J11 12 12 38 mm No 179 9GV1224P4G1 9GV1224G42 9GV1224G41 9GV1224G4D1 9GV1224P4G1 12 12 25 mm Yes 169 9GV1224P4G11 9GV1224G421 9GV1224P4G11 12 12 25 mm No 169 9GV1248P1J1 9GV1248J12 9GV1248J11 9GV1248J1D1 9GV1248P1J1 12 12 38 mm Yes 179 9GV1248P1J11 9GV1248J121 9GV1248J111 9GV1248P1J11 12 12 38 mm No 179 9GV1248P4G1 9GV1248G42 9GV1248G411 9GV1248P4G1 12 12 25 mm Yes 169 9GV1248P4G11 9GV1248G411 9GV1248P4G11 12 12 25 mm No 169 9GV1248P4H1 9GV1248H42 9GV1248H41 9GV1248H4D1 9GV1248P4H1 12 12 25 mm Yes 169 9GV1248P4H11 9GV1248P4H11 12 12 25 mm No 169 9GV1248P4J1 9GV1248P4J1 12 12 25 mm Yes 169 9GV1248P4J11 9GV1248P4J11 12 12 25 mm No 169 9GV1412P1G1 9GV1412P1G1 14 14 38 mm No 192 9GV1412P1H1 9GV1412P1H1 14 14 38 mm No 192 9GV1412P1S1 9GV1412P1S1 14 14 38 mm No 192 9GV1424P1G1 9GV1424P1G1 14 14 38 mm No 192 9GV1424P1H1 9GV1424P1H1 14 14 38 mm No 192 9GV1424P1S1 9GV1424P1S1 14 14 38 mm No 192 9GV1448P1G1 9GV1448P1G1 14 14 38 mm No 192 9GV1448P1H1 9GV1448P1H1 14 14 38 mm No 192 9GV1448P1S1 9GV1448P1S1 14 14 38 mm No 192 9GV1512H51 9GV1512H52 9GV1512H51 9GV1512P5H3 15 15 5 mm Yes 198 9GV1512H511 9GV1512H521 9GV1512H511 15 15 5 mm No 198 9GV1512M51 9GV1512M52 9GV1512M51 9GV1512P5M3 15 15 5 mm Yes 198 9GV1512M511 9GV1512M521 9GV1512M511 9GV1512P5M11 15 15 5 mm No 198 9GV1524M51 9GV1524M52 9GV1524M51 9GV1524M5D1 15 15 5 mm Yes 198 Index by Model No. Please contact your point of sale regarding low-speed sensors. 555
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9GV1524M511 9GV1524M511 15 15 5 mm No 198 9GV248PG21 9GV248G22 9GV248PG21 ø 2 7 mm No 216 9GV3612G31 9GV3612G32 9GV3612G31 9GV3612G3D1 9GV3612P3G3 36 36 28 mm Yes 12 9GV3612J31 9GV3612J32 9GV3612J31 9GV3612J3D1 9GV3612P3J3 36 36 28 mm Yes 12 9GV5724H51 9GV5724H52 9GV5724H51 9GV5724P5H3 ø 172 15 51 mm No 28 9GV5748H51 9GV5748H52 9GV5748H51 9GV5748P5H1 ø 172 15 51 mm No 28 9GX3612P3K1 9GX3612K32 9GX3612P3K1 36 36 28 mm Yes 12 9HV412P3K1 9HV412P3K1 4 4 28 mm No 33 9HV612P1J1 9HV612P1J1 6 6 38 mm Yes 83 9HV612P1J11 9HV612P1J11 6 6 38 mm No 83 9HV812P1G61 9HV812G12 9HV812G11 9HV812P1G61 8 8 38 mm Yes 128 9HV812P1G611 9HV812G121 9HV812G111 9HV812P1G611 8 8 38 mm No 128 9HV824P1G3 9HV824G1D1 9HV824P1G3 8 8 38 mm Yes 128 9HV824P1G11 9HV824P1G11 8 8 38 mm No 128 9HV848P1G1 9HV848G12 9HV848G11 9HV848G1D1 9HV848P1G1 8 8 38 mm Yes 128 9HV848P1G11 9HV848G121 9HV848G111 9HV848P1G11 8 8 38 mm No 128 9HV912P1G1 9HV912P1G1 92 92 38 mm Yes 155 9HV912P1G11 9HV912P1G11 92 92 38 mm No 155 9HV948P1G1 9HV948P1G1 92 92 38 mm Yes 155 9HV948P1G11 9HV948P1G11 92 92 38 mm No 155 9HV1224P1A1 9HV1224P1A1 12 12 38 mm No 176 9HV1248P1G1 9HV1248G12 9HV1248G11 9HV1248P1G1 12 12 38 mm No 176 9HV1248P1H1 9HV1248H12 9HV1248H11 9HV1248P1H1 12 12 38 mm No 176 9HV5724P5H1 9HV5724H52 9HV5724H51 9HV5724H5D1 9HV5724P5H1 ø 172 15 51 mm No 23 9HV5748P5G1 9HV5748P5G1 ø 172 15 51 mm No 23 9HVA812P1G1 9HVA812P1G1 8 8 38 mm Yes 126 9HVA812P1G11 9HVA812P1G11 8 8 38 mm No 126 9L412H31 9L412H32 9L412H31 9L412H3D1 4 4 28 mm No 354 9L412J31 9L412J32 9L412J31 9L412J3D1 9L412P3J1 4 4 28 mm No 354 9L412M31 9L412M32 9L412M31 9L412M3D1 4 4 28 mm No 354 9LG612P4H1 9LG612H42 9LG612H41 9LG612H4D1 9LG612P4H1 6 6 25 mm No 356 9LG612P4J1 9LG612J4D1 9LG612P4J1 6 6 25 mm No 356 9LG612P4M1 9LG624M41 9LG612M4D1 9LG612P4M1 6 6 25 mm No 356 9LG612P4S1 9LG612S41 9LG612P4S1 6 6 25 mm No 356 9LG624P4H1 9LG624P4H1 6 6 25 mm No 356 9LG624P4J1 9LG624P4J1 6 6 25 mm No 356 9LG624P4M1 9LG624M41 9LG624P4M1 6 6 25 mm No 356 9LG624P4S1 9LG624P4S1 6 6 25 mm No 356 9LG648P4H1 9LG648P4H1 6 6 25 mm No 356 9LG648P4J1 9LG648P4J1 6 6 25 mm No 356 9LG648P4M1 9LG648P4M1 6 6 25 mm No 356 9LG648P4S1 9LG648P4S1 6 6 25 mm No 356 9LG812P4G1 9LG812P4G1 8 8 25 mm No 363 9LG812P4H1 9LG812P4H1 8 8 25 mm No 363 9LG812P4J1 9LG812J42 9LG812J4D1 9LG812P4J1 8 8 25 mm No 363 9LG824P4G1 9LG824G42 9LG824G4D1 9LG824P4G1 8 8 25 mm No 363 9LG824P4H1 9LG824P4H1 8 8 25 mm No 363 9LG824P4J1 9LG824J4D1 9LG824P4J1 8 8 25 mm No 363 9LG912P1F1 9LG912P1F1 92 92 38 mm No 372 9LG912P1H1 9LG912P1H1 92 92 38 mm No 372 9LG912P4G1 9LG912G42 9LG912P4G1 92 92 25 mm No 368 9LG912P4H1 9LG912P4H1 92 92 25 mm No 368 9LG912P4J1 9LG912P4J1 92 92 25 mm No 368 9LG912P4S1 9LG912P4S1 92 92 25 mm No 368 9LG924P1F1 9LG924P1F1 92 92 38 mm No 372 9LG924P1H1 9LG924P1H1 92 92 38 mm No 372 9LG924P4G1 9LG924P4G1 92 92 25 mm No 368 9LG924P4H1 9LG924P4H1 92 92 25 mm No 368 9LG924P4J1 9LG924J4D1 9LG924P4J1 92 92 25 mm No 368 9LG924P4S1 9LG924S4D1 9LG924P4S1 92 92 25 mm No 368 9LG1212P1G1 9LG1212P1G1 12 12 38 mm No 375 556 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9LG1212P1H1 9LG1212P1H1 12 12 38 mm No 375 9LG1212P1S1 9LG1212P1S1 12 12 38 mm No 375 9LG1224P1G1 9LG1224G1D1 9LG1224P1G1 12 12 38 mm No 375 9LG1224P1H1 9LG1224H11 9LG1224H1D1 9LG1224P1H1 12 12 38 mm No 375 9LG1224P1S1 9LG1224S11 9LG1224S1D1 9LG1224P1S1 12 12 38 mm No 375 9LG1248P1G1 9LG1248G12 9LG1248P1G1 12 12 38 mm No 375 9LG1248P1H1 9LG1248P1H1 12 12 38 mm No 375 9LG1248P1S1 9LG1248P1S1 12 12 38 mm No 375 9LG1412P1A1 9LG1412P1A1 14 14 38 mm No 382 9LG1412P1H1 9LG1412P1H1 14 14 38 mm No 382 9LG1412P1M1 9LG1412M12 9LG1412M11 9LG1412M1D1 9LG1412P1M1 14 14 38 mm No 382 9LG1412P5G1 9LG1412P5G1 14 14 51 mm No 386 9LG1412P5S1 9LG1412P5S1 14 14 51 mm No 386 9LG1424P1A1 9LG1424P1A1 14 14 38 mm No 382 9LG1424P1H1 9LG1424P1H1 14 14 38 mm No 382 9LG1424P1M1 9LG1424M12 9LG1424M11 9LG1424M1D1 9LG1424P1M1 14 14 38 mm No 382 9LG1424P5G1 9LG1424P5G1 14 14 51 mm No 386 9LG1424P5S1 9LG1424S52 9LG1424S51 9LG1424S5D1 9LG1424P5S1 14 14 51 mm No 386 9LG1448P1A1 9LG1448P1A1 14 14 38 mm No 382 9LG1448P1H1 9LG1448P1H1 14 14 38 mm No 382 9LG1448P1M1 9LG1448M12 9LG1448M11 9LG1448M1D1 9LG1448P1M1 14 14 38 mm No 382 9LG1448P5G1 9LG1448P5G1 14 14 51 mm No 386 9LG1448P5S1 9LG1448P5S1 14 14 51 mm No 386 9RF912P1H1 9RF912P1H1 ø 92 38 mm No 26 9RF924P1H1 9RF924P1H1 ø 92 38 mm No 26 9RF1312P3H1 9RF1312P3H1 ø 136 28 mm No 262 9RF1324P3H1 9RF1324P3H1 ø 136 28 mm No 262 9S612F41 9S612F42 9S612F41 9S612F4D1 9S612P4F1 6 6 25 mm Yes 71 9S612F411 9S612F421 9S612F411 9S612F4D11 9S612P4F11 6 6 25 mm No 71 9S612H41 9S612H42 9S612H41 9S612H4D1 9S612P4H1 6 6 25 mm Yes 71 9S612H411 9S612H421 9S612H411 9S612H4D11 9S612P4H11 6 6 25 mm No 71 9S612M41 9S612M42 9S612M41 9S612M4D1 9S612P4M1 6 6 25 mm Yes 71 9S612M411 9S612M421 9S612M411 9S612M4D11 6 6 25 mm No 71 9S612S41 9S612S42 9S612S41 9S612S4D1 9S612P4S1 6 6 25 mm Yes 71 9S612S411 9S612S411 6 6 25 mm No 71 9S812F41 9S812F42 9S812F41 9S812F4D1 9S812P4F1 8 8 25 mm Yes 112 9S812F411 9S812F421 9S812F411 9S812F4D11 9S812P4F11 8 8 25 mm No 112 9S812H41 9S812H42 9S812H41 9S812H4D1 8 8 25 mm Yes 112 9S812H411 9S812H411 9S812H4D11 8 8 25 mm No 112 9S812L41 9S812L42 9S812L41 9S812L4D1 8 8 25 mm Yes 112 9S812L411 9S812L421 9S812L411 9S812L4D11 8 8 25 mm No 112 9S812M41 9S812M42 9S812M41 9S812M4D1 9S812P4M1 8 8 25 mm Yes 112 9S812M411 9S812M421 9S812M411 9S812M4D11 9S812P4M11 8 8 25 mm No 112 9S824L41 9S824L42 9S824L41 9S824L4D1 8 8 25 mm Yes 112 9S824L411 9S824L421 9S824L411 9S824L4D11 8 8 25 mm No 112 9S824M41 9S824M42 9S824M41 9S824M4D1 8 8 25 mm Yes 112 9S824M411 9S824M421 9S824M411 9S824M4D11 8 8 25 mm No 112 9S912F41 9S912F42 9S912F41 9S912F4D1 9S912P4F1 92 92 25 mm Yes 144 9S912F411 9S912F421 9S912F411 9S912F4D11 9S912P4F11 92 92 25 mm No 144 9S912L41 9S912L42 9S912L41 9S912L4D1 92 92 25 mm Yes 144 9S912L411 9S912L421 9S912L411 9S912L4D11 92 92 25 mm No 144 9S912M41 9S912M42 9S912M41 9S912M4D1 9S912P4M1 92 92 25 mm Yes 144 9S912M411 9S912M421 9S912M411 9S912M4D11 9S912P4M11 92 92 25 mm No 144 9S924F41 9S924F42 9S924F41 9S924F4D1 92 92 25 mm Yes 144 9S924F411 9S924F421 9S924F411 92 92 25 mm No 144 9S924L41 9S924L42 9S924L41 9S924L4D1 92 92 25 mm Yes 144 9S924L411 9S924L421 9S924L411 92 92 25 mm No 144 9S924M41 9S924M42 9S924M41 9S924M4D1 92 92 25 mm Yes 144 9S924M411 9S924M421 9S924M411 92 92 25 mm No 144 9S1212F41 9S1212F42 9S1212F41 9S1212F4D1 9S1212P4F1 12 12 25 mm Yes 163 9S1212F411 9S1212F421 9S1212F411 9S1212F4D11 9S1212P4F11 12 12 25 mm No 163 Index by Model No. Please contact your point of sale regarding low-speed sensors. 557
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9S1212H41 9S1212H42 9S1212H41 9S1212H4D1 9S1212P4H1 12 12 25 mm Yes 163 9S1212H411 9S1212H421 9S1212H411 9S1212P4H11 12 12 25 mm No 163 9S1212L41 9S1212L42 9S1212L41 9S1212L4D1 12 12 25 mm Yes 163 9S1212L411 9S1212L421 9S1212L411 9S1212L4D11 9S1212P4L11 12 12 25 mm No 163 9S1212M41 9S1212M42 9S1212M41 9S1212M4D1 9S1212P4M1 12 12 25 mm Yes 163 9S1212M411 9S1212M421 9S1212M411 9S1212M4D11 9S1212P4M11 12 12 25 mm No 163 9S1224M41 9S1224M42 9S1224M41 9S1224M4D1 12 12 25 mm Yes 163 9S1224M411 9S1224M421 9S1224M411 9S1224M4D11 12 12 25 mm No 163 9SG1212G11 9SG1212G12 9SG1212G11 9SG1212G1D1 9SG1212P1G1 12 12 38 mm No 185 9SG1224G11 9SG1224G12 9SG1224G11 9SG1224G1D1 9SG1224P1G1 12 12 38 mm No 185 9SG1224H11 9SG1224H12 9SG1224H11 9SG1224H1D1 12 12 38 mm No 185 9SG1248G11 9SG1248G12 9SG1248G11 9SG1248P1G1 12 12 38 mm No 185 9SG5724P5H61 9SG5724H562 9SG5724P5H61 ø 172 15 51 mm No 25 9SG5748P5G1 9SG5748P5G1 ø 172 15 51 mm No 25 9SG5748P5H1 9SG5748P5H1 ø 172 15 51 mm No 25 9TG24PG1 9TG24G2 9TG24G1 9TG24PG1 ø 175 69 mm 422 9TG24PS1 9TG24S2 9TG24S1 9TG24PS1 ø 175 69 mm 422 9TG48PG1 9TG48PG1 ø 175 69 mm 422 9TGA24PH1 9TGA24PH1 ø 175 69 mm 42 9TGA48PG1 9TGA48PG1 ø 175 69 mm 42 9TJ24PH61 9TJ24PH61 ø 133 91 mm 416 9TJ48PH1 9TJ48PH1 ø 133 91 mm 416 9TM24P4H1 9TM24P4H1 ø 1 25 mm 414 9TM48P4H1 9TM48P4H1 ø 1 25 mm 414 9TN24P1H1 9TN24P1H1 ø 15 35 mm 418 9TN48P1H1 9TN48P1H1 ø 15 35 mm 418 9TP24PH1 9TP24PH1 ø 221 71 mm 425 9TP48PG1 9TP48G2 9TP48PG1 ø 221 71 mm 425 9TP48PH1 9TP48PH1 ø 221 71 mm 425 9TS48PG1 9TS48PG1 ø 225 99 mm 428 9TS48PH1 9TS48PH1 ø 225 99 mm 428 9W1TG48PH61 9W1TG48PH61 ø 175 69 mm 326 9W1TJ24PH61 9W1TJ24PH61 ø 133 91 mm 322 9W1TJ48PH61 9W1TJ48PH61 ø 133 91 mm 322 9W1TM48P4G1 9W1TM48P4G1 ø 1 25 mm 32 9W1TM48P4H1 9W1TM48P4H1 ø 1 25 mm 32 9W1TN48P1H1 9W1TN48P1H1 ø 15 35 mm 324 9W2TP24PH1 9W2TP24PH1 ø 221 71 mm 328 9W2TP48PS1 9W2TP48PS1 ø 221 71 mm 328 9W2TS48PS1 9W2TS48PS1 ø 225 99 mm 33 9WE1724K51 9WE1724K52 9WE1724K51 ø 172 51 mm No 317 9WE5724K51 9WE5724K52 9WE5724K51 ø 172 15 51 mm No 315 9WE5748K51 9WE5748K52 9WE5748K51 9WE5748K5D1 9WE5748P5K1 ø 172 15 51 mm No 315 9WF424F61 9WF424F62 9WF424F61 9WF424F6D1 4 4 2 mm Yes 336 9WF424H61 9WF424H62 9WF424H61 9WF424H6D1 4 4 2 mm Yes 336 9WF424H71 9WF424H72 9WF424H71 9WF424H7D1 4 4 15 mm Yes 334 9WF624H41 9WF624H42 9WF624H41 9WF624H4D1 6 6 25 mm Yes 342 9WF624H61 9WF624H61 9WF624H6D1 6 6 2 mm Yes 34 9WF624H71 9WF624H72 9WF624H71 9WF624H7D1 6 6 15 mm Yes 338 9WF824S41 9WF824S42 9WF824S41 9WF824S4D1 8 8 25 mm Yes 344 9WF924H21 9WF924H22 9WF924H21 9WF924H2D1 92 92 32 mm Yes 348 9WF924H211 9WF924H211 92 92 32 mm No 348 9WF924H41 9WF924H42 9WF924H41 9WF924H4D1 92 92 25 mm Yes 346 9WF924H411 9WF924H4D11 92 92 25 mm No 346 9WF924S21 9WF924S22 9WF924S21 9WF924S2D1 92 92 32 mm Yes 348 9WF924S211 9WF924S211 92 92 32 mm No 348 9WF1224H11 9WF1224H12 9WF1224H11 9WF1224H1D1 12 12 38 mm Yes 35 9WG1212E11-E 9WG1212E12-E 9WG1212E11-E 9WG1212E1D1-E 12 12 38 mm No 33 9WG1212F11-E 9WG1212F12-E 9WG1212F11-E 12 12 38 mm No 33 9WG1212G11-E 9WG1212G12-E 9WG1212G11-E 9WG1212G1D1-E 12 12 38 mm No 33 9WG1212H11-E 9WG1212H12-E 9WG1212H11-E 9WG1212H1D1-E 12 12 38 mm No 33 558 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9WG1212M11-E 9WG1212M12-E 9WG1212M11-E 12 12 38 mm No 33 9WG1224E11-E 9WG1224E12-E 9WG1224E11-E 9WG1224E1D1-E 12 12 38 mm No 33 9WG1224F11-E 9WG1224F12-E 9WG1224F11-E 9WG1224F1D1-E 12 12 38 mm No 33 9WG1224G11-E 9WG1224G12-E 9WG1224G11-E 9WG1224G1D1-E 12 12 38 mm No 33 9WG1224H11-E 9WG1224H12-E 9WG1224H11-E 9WG1224H1D1-E 12 12 38 mm No 33 9WG1224M11-E 9WG1224M12-E 9WG1224M11-E 12 12 38 mm No 33 9WG1248E11-E 9WG1248E12-E 9WG1248E11-E 12 12 38 mm No 33 9WG1248F11-E 9WG1248F12-E 9WG1248F11-E 12 12 38 mm No 33 9WG1248G11-E 9WG1248G12-E 9WG1248G11-E 12 12 38 mm No 33 9WG1248H11-E 9WG1248H12-E 9WG1248H11-E 9WG1248H1D1-E 12 12 38 mm No 33 9WG1248M11-E 9WG1248M12-E 9WG1248M11-E 12 12 38 mm No 33 9WG5748P5G1 9WG5748G52 9WG5748P5G1 ø 172 15 51 mm No 313 9WG5748P5H1 9WG5748H51 9WG5748H5D1 9WG5748P5H1 ø 172 15 51 mm No 313 9WL412P3G1 9WL412G32 9WL412G31 9WL412P3G1 4 4 28 mm No 268 9WL412P3J1 9WL412J32 9WL412J31 9WL412P3J1 4 4 28 mm No 268 9WL424P3G1 9WL424G32 9WL424G31 9WL424P3G1 4 4 28 mm No 268 9WL424P3J1 9WL424J32 9WL424J31 9WL424P3J1 4 4 28 mm No 268 9WL612P4H1 9WL612P4H1 6 6 25 mm No 271 9WL612P4J1 9WL612J42 9WL612J4D1 9WL612P4J1 6 6 25 mm No 271 9WL612P4S1 9WL612S42 9WL612S4D1 9WL612P4S1 6 6 25 mm No 271 9WL624P4H1 9WL624H41 9WL624P4H1 6 6 25 mm No 271 9WL624P4J1 9WL624P4J1 6 6 25 mm No 271 9WL624P4S1 9WL624P4S1 6 6 25 mm No 271 9WL812P4G1 9WL812G4D1 9WL812P4G1 8 8 25 mm No 277 9WL812P4H1 9WL812H42 9WL812P4H1 8 8 25 mm No 277 9WL812P4J1 9WL812P4J1 8 8 25 mm No 277 9WL824P4G1 9WL824P4G1 8 8 25 mm No 277 9WL824P4H1 9WL824P4H1 8 8 25 mm No 277 9WL824P4J1 9WL824P4J1 8 8 25 mm No 277 9WL912P4G1 9WL912P4G1 92 92 25 mm No 286 9WL912P4H1 9WL912P4H1 92 92 25 mm No 286 9WL912P4J1 9WL912J42 9WL912P4J1 92 92 25 mm No 286 9WL912P4S1 9WL912P4S1 92 92 25 mm No 286 9WL924P4H1 9WL924P4H1 92 92 25 mm No 286 9WL924P4J1 9WL924P4J1 92 92 25 mm No 286 9WL924P4S1 9WL924P4S1 92 92 25 mm No 286 9WL1412P1A1 9WL1412P1A1 14 14 38 mm No 36 9WL1412P1H1 9WL1412P1H1 14 14 38 mm No 36 9WL1412P1M1 9WL1412M12 9WL1412M11 9WL1412M1D1 9WL1412P1M1 14 14 38 mm No 36 9WL1412P5G1 9WL1412P5G1 14 14 51 mm No 31 9WL1412P5S1 9WL1412P5S1 14 14 51 mm No 31 9WL1424P1A1 9WL1424P1A1 14 14 38 mm No 36 9WL1424P1H1 9WL1424P1H1 14 14 38 mm No 36 9WL1424P1M1 9WL1424M12 9WL1424M11 9WL1424M1D1 9WL1424P1M1 14 14 38 mm No 36 9WL1424P5G1 9WL1424P5G1 14 14 51 mm No 31 9WL1424P5S1 9WL1424P5S1 14 14 51 mm No 31 9WL1448P1A1 9WL1448P1A1 14 14 38 mm No 36 9WL1448P1H1 9WL1448P1H1 14 14 38 mm No 36 9WL1448P1M1 9WL1448M12 9WL1448M11 9WL1448M1D1 9WL1448P1M1 14 14 38 mm No 36 9WL1448P5G1 9WL1448P5G1 14 14 51 mm No 31 9WL1448P5S1 9WL1448P5S1 14 14 51 mm No 31 9WP412F61 9WP412F62 9WP412F61 9WP412F6D1 4 4 2 mm Yes 266 9WP412H61 9WP412H62 9WP412H61 4 4 2 mm Yes 266 9WP612D41 9WP612D42 9WP612D41 9WP612D4D1 6 6 25 mm Yes 274 9WP612D411 9WP612D411 9WP612D4D11 6 6 25 mm No 274 9WP612G41 9WP612G42 9WP612G41 9WP612G4D1 9WP612P4G1 6 6 25 mm Yes 274 9WP612G411 9WP612G421 9WP612G411 6 6 25 mm No 274 9WP612H41 9WP612H42 9WP612H41 9WP612H4D1 6 6 25 mm Yes 274 9WP612H411 9WP612H421 9WP612H411 9WP612H4D11 6 6 25 mm No 274 9WP624G41 9WP624G42 9WP624G41 9WP624G4D1 6 6 25 mm Yes 274 9WP624G411 9WP624G411 6 6 25 mm No 274 Index by Model No. Please contact your point of sale regarding low-speed sensors. 559
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9WP624H41 9WP624H42 9WP624H41 9WP624H4D1 6 6 25 mm Yes 274 9WP624H411 9WP624H421 9WP624H411 9WP624H4D11 6 6 25 mm No 274 9WP624J41 9WP624J42 9WP624J41 6 6 25 mm Yes 274 9WP624J411 9WP624J411 6 6 25 mm No 274 9WP648H41 9WP648H42 9WP648H41 9WP648H4D1 6 6 25 mm Yes 274 9WP648H411 9WP648H421 9WP648H411 9WP648H4D11 6 6 25 mm No 274 9WP812G41 9WP812G42 9WP812G41 9WP812G4D1 9WP812P4G1 8 8 25 mm Yes 28 9WP812G411 9WP812G421 9WP812G411 9WP812G4D11 8 8 25 mm No 28 9WP812H41 9WP812H42 9WP812H41 9WP812H4D1 8 8 25 mm Yes 28 9WP812H411 9WP812H421 9WP812H411 9WP812H4D11 8 8 25 mm No 28 9WP824H41 9WP824H42 9WP824H41 9WP824H4D1 8 8 25 mm Yes 28 9WP824H411 9WP824H421 9WP824H411 9WP824H4D11 8 8 25 mm No 28 9WP824S41 9WP824S42 9WP824S41 9WP824S4D1 8 8 25 mm Yes 28 9WP824S411 9WP824S421 9WP824S411 8 8 25 mm No 28 9WP848S41 9WP848S42 9WP848S41 9WP848S4D1 8 8 25 mm Yes 28 9WP848S411 9WP848S421 9WP848S411 9WP848S4D11 8 8 25 mm No 28 9WP912F41 9WP912F42 9WP912F41 9WP912F4D1 92 92 25 mm Yes 293 9WP912F411 9WP912F411 9WP912F4D11 92 92 25 mm No 293 9WP912S41 9WP912S42 9WP912S41 9WP912S4D1 92 92 25 mm Yes 293 9WP912S411 9WP912S411 92 92 25 mm No 293 9WP924B41 9WP924B42 9WP924B41 9WP924B4D1 92 92 25 mm Yes 293 9WP924B411 9WP924B421 9WP924B411 9WP924B4D11 92 92 25 mm No 293 9WP924F41 9WP924F42 9WP924F41 9WP924F4D1 92 92 25 mm Yes 293 9WP924F411 9WP924F421 9WP924F411 9WP924F4D11 92 92 25 mm No 293 9WP924G41 9WP924G42 9WP924G41 9WP924G4D1 92 92 25 mm Yes 293 9WP924G411 9WP924G411 92 92 25 mm No 293 9WP924H41 9WP924H42 9WP924H41 9WP924H4D1 92 92 25 mm Yes 293 9WP924H411 9WP924H411 92 92 25 mm No 293 9WP924S41 9WP924S42 9WP924S41 9WP924S4D1 92 92 25 mm Yes 293 9WP924S411 9WP924S411 92 92 25 mm No 293 9WP1212H11 9WP1212H12 9WP1212H11 9WP1212H1D1 12 12 38 mm Yes 31 9WP1212H111 9WP1212H121 9WP1212H111 9WP1212H1D11 12 12 38 mm No 31 9WP1212L11 9WP1212L11 12 12 38 mm Yes 31 9WP1212L111 9WP1212L111 12 12 38 mm No 31 9WP1224H11 9WP1224H12 9WP1224H11 9WP1224H1D1 12 12 38 mm Yes 31 9WP1224H111 9WP1224H121 9WP1224H111 9WP1224H1D11 12 12 38 mm No 31 9WP1248H11 9WP1248H12 9WP1248H11 9WP1248H1D1 12 12 38 mm Yes 31 9WP1248H111 9WP1248H121 9WP1248H111 9WP1248H1D11 12 12 38 mm No 31 9WS812F41 9WS812F42 9WS812F41 9WS812F4D1 8 8 25 mm Yes 282 9WS812F411 9WS812F421 9WS812F411 8 8 25 mm No 282 9WS812H41 9WS812H42 9WS812H41 8 8 25 mm Yes 282 9WS812H411 9WS812H421 9WS812H411 8 8 25 mm No 282 9WS812M41 9WS812M42 9WS812M41 9WS812M4D1 8 8 25 mm Yes 282 9WS812M411 9WS812M421 9WS812M411 8 8 25 mm No 282 9WS824F41 9WS824F42 9WS824F41 8 8 25 mm Yes 282 9WS824F411 9WS824F421 9WS824F411 8 8 25 mm No 282 9WS824H41 9WS824H42 9WS824H41 9WS824H4D1 8 8 25 mm Yes 282 9WS824H411 9WS824H421 9WS824H411 8 8 25 mm No 282 9WS824M41 9WS824M42 9WS824M41 9WS824M4D1 8 8 25 mm Yes 282 9WS824M411 9WS824M421 9WS824M411 8 8 25 mm No 282 9WS912F41 9WS912F42 9WS912F41 9WS912F4D1 92 92 25 mm Yes 29 9WS912H41 9WS912H42 9WS912H41 92 92 25 mm Yes 29 9WS912L41 9WS912L42 9WS912L41 92 92 25 mm Yes 29 9WS912M41 9WS912M42 9WS912M41 92 92 25 mm Yes 29 9WS924F41 9WS924F42 9WS924F41 92 92 25 mm Yes 29 9WS924H41 9WS924H42 9WS924H41 9WS924H4D1 92 92 25 mm Yes 29 9WS924L41 9WS924L42 9WS924L41 92 92 25 mm Yes 29 9WS924M41 9WS924M42 9WS924M41 9WS924M4D1 92 92 25 mm Yes 29 9WV812P1M1 9WV812M11 9WV812M1D1 9WV812P1M1 8 8 38 mm Yes 284 9WV812P1M11 9WV812P1M11 8 8 38 mm No 284 9WV848P1H1 9WV848P1H1 8 8 38 mm Yes 284 56 Please contact your point of sale regarding low-speed sensors.
Models listed in the main section of this catalog List of models (models not listed in the main section of this catalog are options. Standards for optional model numbers may differ from the certified standards listed at right. Contact us for details of models with "-" model numbers.) Frame size Rib Without sensor With pulse sensor With lock sensor With PWM control function and pulse sensor Standard (certification status is for the models listed in this catalog, and standards for optional page model numbers may differ.) UL CSA cul cul TÜV 9WV848P1H11 9WV848P1H11 8 8 38 mm No 284 9WV924P1H1 9WV924H12 9WV924P1H1 92 92 38 mm Yes 296 9WV948P1H1 9WV948P1H1 92 92 38 mm Yes 296 9WV1212P1J1 9WV1212J12 9WV1212J1D1 9WV1212P1J1 12 12 38 mm No 298 9WV1224P1H1 9WV1224H12 9WV1224H11 9WV1224H1D1 9WV1224P1H1 12 12 38 mm No 298 9WV1224P1J61 9WV1224J11 9WV1224P1J61 12 12 38 mm No 298 9WV1248P1J1 9WV1248J12 9WV1248J11 9WV1248J1D1 9WV1248P1J1 12 12 38 mm No 298 Please contact your point of sale regarding low-speed sensors. Index by Model No. 561
Index by Model No./Safety Standards List - AC Fans AC Models listed in the main section of this catalog UL CSA Frame size Model Rated voltage [V] TÜV CE PSE Note page cul cul 9AD91H12 92 92 38 mm San Ace 92AD 1 to 24 Ribbed 458 9AD91H121 92 92 38 mm San Ace 92AD 1 to 24 Ribless 458 9AD91H1H 92 92 38 mm San Ace 92AD 1 to 24 Ribbed 458 9AD91H1H1 92 92 38 mm San Ace 92AD 1 to 24 Ribless 458 9AD91M12 92 92 38 mm San Ace 92AD 1 to 24 Ribbed 458 9AD91M121 92 92 38 mm San Ace 92AD 1 to 24 Ribless 458 9AD91M1H 92 92 38 mm San Ace 92AD 1 to 24 Ribbed 458 9AD91M1H1 92 92 38 mm San Ace 92AD 1 to 24 Ribless 458 9AD121H12 12 12 38 mm San Ace 12AD 1 to 24 Ribbed 461 9AD121H121 12 12 38 mm San Ace 12AD 1 to 24 Ribless 461 9AD121H1H 12 12 38 mm San Ace 12AD 1 to 24 Ribbed 461 9AD121H1H1 12 12 38 mm San Ace 12AD 1 to 24 Ribless 461 Please contact your point of sale for pulse sensors and lock sensors. Index by Model No./Safety Standards List - AC Fans AC Models listed in the main section of this catalog 562 Frame size Model Rated voltage [V] UL CSA TÜV CE PSE Note page 19-33UL 8 8 42 mm San Ace 8 115 476 19-4UL 8 8 42 mm San Ace 8 1 476 19-41UL 8 8 42 mm San Ace 8 2 476 19-43UL 8 8 42 mm San Ace 8 115 476 19-44UL 8 8 42 mm San Ace 8 23 476 19-47UL 8 8 42 mm San Ace 8 1 476 19-13 6 6 38 mm San Ace 6 1 468 19-133 6 6 38 mm San Ace 6 115 468 19-15 8 8 38 mm San Ace 8 1 474 19-151 8 8 38 mm San Ace 8 2 474 19-153 8 8 38 mm San Ace 8 115 474 19-154 8 8 38 mm San Ace 8 23 474 19-18 6 6 28 mm San Ace 6 1 466 19-183 6 6 28 mm San Ace 6 115 466 19-21 8 8 2 mm San Ace 8 1 47 19-213 8 8 2 mm San Ace 8 115 47 19-311 ø 172 51 mm Round type) San Ace 172 1 496 19-312 ø 172 51 mm Round type) San Ace 172 2 496 19-313 ø 172 51 mm Round type) San Ace 172 23 496 19-314 ø 172 51 mm Round type) San Ace 172 115 496 19-371 ø 172 51 mm with sensor) San Ace 172 1 496 19-372 ø 172 51 mm with sensor) San Ace 172 2 496 19-373 ø 172 51 mm with sensor) San Ace 172 23 496 19-374 ø 172 51 mm with sensor) San Ace 172 115 496 19-61 16 16 51 mm San Ace 16 1 491 19-62 16 16 51 mm San Ace 16 2 491 19-63 16 16 51 mm San Ace 16 23 491 19-64 16 16 51 mm San Ace 16 115 491 19-641 16 16 51 mm with sensor) San Ace 16 1 491 19-642 16 16 51 mm with sensor) San Ace 16 2 491 19-643 16 16 51 mm with sensor) San Ace 16 23 491 19-644 16 16 51 mm with sensor) San Ace 16 115 491 19S5 12 12 38 mm San Ace 12 1 486 19S5UL 12 12 38 mm San Ace 12 1 486 19S6 12 12 38 mm San Ace 12 1 486 19S6UL 12 12 38 mm San Ace 12 1/115 486 19S8 12 12 38 mm San Ace 12 2 486 19S8UL 12 12 38 mm San Ace 12 2 486 19S1 12 12 38 mm San Ace 12 2 486 19S1UL 12 12 38 mm San Ace 12 2/24 486 19S13 12 12 38 mm San Ace 12 1 486 19S13UL 12 12 38 mm San Ace 12 1 486 19S24 12 12 38 mm San Ace 12 12 486 19S24UL 12 12 38 mm San Ace 12 115 486 19S25 12 12 38 mm San Ace 12 23 486 19S25UL 12 12 38 mm San Ace 12 23 486 19S29UL 12 12 38 mm San Ace 12 1 486
Models listed in the main section of this catalog Frame size Model Rated voltage [V] UL CSA TÜV CE PSE Note page 19S3 8 8 25 mm San Ace 8 1 472 19S31 8 8 25 mm San Ace 8 2 472 19S33 8 8 25 mm San Ace 8 115 472 19S34 8 8 25 mm San Ace 8 23 472 19S5 8 8 25 mm San Ace 8 1 472 19S51 8 8 25 mm San Ace 8 2 472 19S53 8 8 25 mm San Ace 8 115 472 19S54 8 8 25 mm San Ace 8 23 472 19S72UL 12 12 38 mm San Ace 12 23 486 19S74UL 12 12 38 mm San Ace 12 115 486 19S75UL 12 12 38 mm San Ace 12 1 486 19S78UL 12 12 38 mm San Ace 12 2 486 19S81 12 12 25 mm San Ace 12 1 482 19S82 12 12 25 mm San Ace 12 2 482 19S83 12 12 25 mm San Ace 12 115 482 19S84 12 12 25 mm San Ace 12 115 482 19S85 12 12 25 mm San Ace 12 1 482 19S86 12 12 25 mm San Ace 12 1 482 19S87 12 12 25 mm San Ace 12 23 482 19S88 12 12 25 mm San Ace 12 2 482 19S89 12 12 25 mm San Ace 12 23 482 19S91 92 92 25 mm San Ace 92 1 478 19S92 92 92 25 mm San Ace 92 2 478 19S93 92 92 25 mm San Ace 92 115 478 19S94 92 92 25 mm San Ace 92 23 478 19S95 92 92 25 mm San Ace 92 1 478 19S96 92 92 25 mm San Ace 92 1 478 19S192 92 92 25 mm San Ace 92 2 478 19S193 92 92 25 mm San Ace 92 115 478 19S194 92 92 25 mm San Ace 92 23 478 19S31 ø 172 15 51 mm Sidecut type) San Ace 172 1 494 19S32 ø 172 15 51 mm Sidecut type) San Ace 172 2 494 19S33 ø 172 15 51 mm Sidecut type) San Ace 172 23 494 19S34 ø 172 15 51 mm Sidecut type) San Ace 172 115 494 19S45UL 12 12 38 mm with sensor) San Ace 12 1 487 19S46UL 12 12 38 mm with sensor) San Ace 12 1 487 19S48UL 12 12 38 mm with sensor) San Ace 12 2 487 19S424UL 12 12 38 mm with sensor) San Ace 12 115 487 19S425UL 12 12 38 mm with sensor) San Ace 12 23 487 19S429UL 12 12 38 mm with sensor) San Ace 12 1 487 19S472UL 12 12 38 mm with sensor) San Ace 12 23 487 19S474UL 12 12 38 mm with sensor) San Ace 12 115 487 19S475UL 12 12 38 mm with sensor) San Ace 12 1 487 19S478UL 12 12 38 mm with sensor) San Ace 12 2 487 19S484 12 12 25 mm with sensor) San Ace 12 115 482 19S485 12 12 25 mm with sensor) San Ace 12 1 482 19S486 12 12 25 mm with sensor) San Ace 12 1 482 19S487 12 12 25 mm with sensor) San Ace 12 23 482 19S488 12 12 25 mm with sensor) San Ace 12 2 482 19S491 92 92 25 mm with sensor) San Ace 92 1 478 19S492 92 92 25 mm with sensor) San Ace 92 2 478 19S493 92 92 25 mm with sensor) San Ace 92 115 478 19S494 92 92 25 mm with sensor) San Ace 92 23 478 19S495 92 92 25 mm with sensor) San Ace 92 1 478 19S496 92 92 25 mm with sensor) San Ace 92 1 478 Index by Model No. AC 563
Index by Model No. - Options Finger Guards AC Model no. Category Matching fan size page 19-19C Finger Guards 12 mm sq. type 514 19-19E Finger Guards 12 mm sq. type 514 19-19H Finger Guards 12 mm sq. type 514 19-19K Finger Guards 12 mm sq. type 514 19-49C Finger Guards 8 mm sq. type 513 19-49E Finger Guards 8 mm sq. type 513 19-49H Finger Guards 8 mm sq. type 513 19-59 Finger Guards 4 mm sq. type 513 19-59H Finger Guards 4 mm sq. type 513 19-99C Finger Guards 92 mm sq. type 513 19-99E Finger Guards 92 mm sq., ø 1 mm type 513 19-99H Finger Guards 92 mm sq., ø 1 mm type 513 19-15 Finger Guards 36 mm sq. type 513 19-151 Finger Guards 15 mm sq. type 514 19-152 Finger Guards 15 mm sq. type 514 19-165 Finger Guards 38 mm sq. type 513 19-166 Finger Guards ø172 mm type 515 19-168 Finger Guards ø 172 mm type 515 19-112 Finger Guards ø 2 mm type 516 19-113 Finger Guards ø 2 mm type 516 19-114 Finger Guards ø 15 mm type 514 19-114H Finger Guards ø 15 mm type 514 19-1112 Finger Guards ø 133 mm type 514 19-1128 Finger Guards 7 mm sq. type 513 19-1137 Finger Guards ø 225 mm type 516 19-1137H Finger Guards ø 225 mm type 516 19-1138 Finger Guards ø 221 mm type 516 19-1138H Finger Guards ø 221 mm type 516 19-1139 Finger Guards ø 136 mm type 514 19-1146 Finger Guards 27 mm sq. type 517 19-1147 Finger Guards ø 92 mm type 513 19-139E Finger Guards 6 mm sq. type 513 19-139H Finger Guards 6 mm sq. type 513 19-149 Finger Guards 52 mm sq. type 513 19-149E Finger Guards 52 mm sq. type 513 19-319E Finger Guards ø 172 mm type 515 19-319H Finger Guards ø 172 mm type 515 19-319J Finger Guards ø 172 mm type 515 19-32 Finger Guards ø 172 mm type 515 19-619E Finger Guards 16 mm sq. type 514 19-619H Finger Guards 16 mm sq. type 514 19-62 Finger Guards 16 mm sq. type 514 19-719 Finger Guards 14 mm sq. type 514 19-719H Finger Guards 14 mm sq. type 514 19-72 Finger Guards ø 2 mm type 516 19-72H Finger Guards ø 2 mm type 516 19-721 Finger Guards ø 2 mm type 516 19-721H Finger Guards ø 2 mm type 516 19-722 Finger Guards 127 mm sq., ø 175 mm type 514 19-723 Finger Guards 127 mm sq. type 514 Resin Finger Guards/Resin Filter Kits AC Model no. Category Matching fan size page 19-1F13 Resin Filter Kits 12 mm sq. type 521 19-1F2 Resin Filter Kits 12 mm sq. type 521 19-1F3 Resin Filter Kits 12 mm sq. type 521 19-1F4 Resin Filter Kits 12 mm sq. type 521 19-11F13 Resin Filter Kits 92 mm sq. type 521 19-11F2 Resin Filter Kits 92 mm sq. type 521 19-11F3 Resin Filter Kits 92 mm sq. type 521 19-11F4 Resin Filter Kits 92 mm sq. type 521 19-12F13 Resin Filter Kits 8 mm sq. type 521 19-12F2 Resin Filter Kits 8 mm sq. type 521 19-12F3 Resin Filter Kits 8 mm sq. type 521 19-12F4 Resin Filter Kits 8 mm sq. type 521 19-13F13 Resin Filter Kits 6 mm sq. type 521 19-13F2 Resin Filter Kits 6 mm sq. type 521 19-13F3 Resin Filter Kits 6 mm sq. type 521 19-13F4 Resin Filter Kits 6 mm sq. type 521 19-1G Resin Finger Guards 12 mm sq. type 52 19-11G Resin Finger Guards 92 mm sq. type 52 19-12G Resin Finger Guards 8 mm sq. type 52 19-13G Resin Finger Guards 6 mm sq. type 52 Replacement filter AC Model no. Category Matching fan size page 19-1M13 Replacement filter 12 mm sq. type 521 19-1M2 Replacement filter 12 mm sq. type 521 19-1M3 Replacement filter 12 mm sq. type 521 19-1M4 Replacement filter 12 mm sq. type 521 19-11M13 Replacement filter 92 mm sq. type 521 19-11M2 Replacement filter 92 mm sq. type 521 19-11M3 Replacement filter 92 mm sq. type 521 19-11M4 Replacement filter 92 mm sq. type 521 19-12M13 Replacement filter 8 mm sq. type 521 19-12M2 Replacement filter 8 mm sq. type 521 19-12M3 Replacement filter 8 mm sq. type 521 19-12M4 Replacement filter 8 mm sq. type 521 19-13M13 Replacement filter 6 mm sq. type 521 19-13M2 Replacement filter 6 mm sq. type 521 19-13M3 Replacement filter 6 mm sq. type 521 19-13M4 Replacement filter 6 mm sq. type 521 564
EMC guards/inlet nozzle for centrifugal fan and splash proof centrifugal fan Model no. Category Matching fan size page 19-136 EMC guards ø 172 mm type 519 19-137 EMC guards 12 mm sq. type 519 19-138 EMC guards 8 mm sq. type 519 19-139 EMC guards 8 mm sq. type 519 19-14 EMC guards 92 mm sq. type 519 19-169 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 133 mm type 518 19-169H Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 133 mm type 518 19-173 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 175 mm type 518 19-173H Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 175 mm type 518 19-18 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 1 mm type 518 19-181 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 15 mm type 518 19-181H Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 15 mm type 518 19-1134 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 225 mm type 518 19-1134H Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 225 mm type 518 19-1135 Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 221 mm type 518 19-1135H Inlet nozzle for centrifugal fan and splash proof centrifugal fan ø 221 mm type 518 Plug Cord AC Model no. UL CSA PSE Applicable model page 489-6-L1 12 12 38 mm 523 489-6-L21 12 12 38 mm 523 489-6-L35 12 12 38 mm 523 489-7-L1 12 12 38 mm 524 489-7-L21 12 12 38 mm 524 489-8-L1 8 8 42 mm 523 489-8-L21 8 8 42 mm 523 489-8-L35 8 8 42 mm 523 12 12 25 mm 489-16-L1 92 92 25 mm 8 8 25 mm 8 8 38 mm 523 12 12 25 mm 489-16-L21 92 92 25 mm 8 8 25 mm 8 8 38 mm 523 489-37-L1 12 12 38 mm 523 489-37-L21 12 12 38 mm 523 489-37-L35 12 12 38 mm 523 12 12 25 mm 489-47-L1 92 92 25 mm 8 8 25 mm 524 8 8 38 mm 12 12 25 mm 489-47-L21 92 92 25 mm 8 8 25 mm 524 8 8 38 mm 489-84-L1 ø 172 51 mm 172 15 51 mm 16 16 51 mm 524 489-84-L21 ø 172 51 mm 172 15 51 mm 16 16 51 mm 524 489-86-L1 16 16 51 mm 524 489-86-L21 16 16 51 mm 524 489-1618-L1 16 16 51 mm 523 489-1618-L21 16 16 51 mm 523 489-1618-L28 16 16 51 mm 523 489-1619-L1 ø 172 51 mm 172 15 51 mm 16 16 51 mm 523 489-1619-L21 ø 172 51 mm 172 15 51 mm 16 16 51 mm 523 489-1635-L1 524 AC Fan 489-1635-L21 524 Reco mmended connectors for fans page 525 Index by Model No. 565
Deleted Models in this Catalog Following models were deleted in this latest version of catalog. However, these models are not discontinued product. Please contact us for further assistance if necessary. Fan Size Model no. Frame material Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] ø 2 7 mm 19E224S1 Aluminum 24 21.6 to 26.4 1.9 45.6 32 1.45 369 287.1 1.153 57-1 to +7 4 ø 2 7 mm 19E224H1 Aluminum 24 2.4 to 27.6 1. 24 26 8.2 289.5 192.771 51-1 to +7 4 ø 2 7 mm 19E224AS1 Aluminum 24 21.6 to 26.4 1.9 45.6 32 1.45 369 287.1 1.153 57 1.45 34.8 28 9 317.8 215.6.865 54-1 to +7 4 ø 2 7 mm 19E224MH1 Aluminum 24 2.4 to 27.6 1. 24 26 8.2 289.5 192.771 51.63 15.12 21 6.7 236.6 115.4.463 45-1 to +7 4 Counter Rotating Fan Size Model no. Frame Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life material [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] Inlet Outlet 4 4 56 mm 9CRA412K51 Plastic 12 1.8 to 12.6 1.8 21.6 17 13.95 33.5 65 2.61 65-2 to +6 4 4 4 56 mm 9CRA412J51 Plastic 12 1.8 to 13.2 1.4 16.8 158 122.9 31.8 57 2.29 62-2 to +7 4 4 4 56 mm 9CRA412G51 Plastic 12 1.8 to 13.2 1. 12 14 14.77 27.2 435 1.75 59-2 to +7 4 6 6 76 mm 9CR612S1 Plastic 12 1.8 to 13.2 3.2 38.4 115 7 2.26 8 55 2.21 66-1 to +6 4 6 6 76 mm 9CR612H1 Plastic 12 1.8 to 13.2 2.7 32.4 13 65 1.98 7 45 1.81 64-1 to +6 4 8 8 8 mm 9CR812S81 Plastic 12 1.8 to 13.2 5.5 66. 8 53 4.53 16 52 2.9 71-1 to +6 4 8 8 8 mm 9CR812H81 Plastic 12 1.8 to 13.2 3.6 43.2 7 46 3.97 14 4 1.61 68-1 to +6 4 Size 6 6 76 mm Model no. Frame material 9CR612PS3 Plastic 12 25. 3.2 9CR612PH3 Plastic 12 25. 2.7 8 8 8 mm 9CR848P8S3 Plastic 48 25. 1.29 Rated voltage PWM frequency Rated current Rated speed [min -1 ] Max. airflow Max. static pressure SPL Expected Life [V] [khz] [A] Duty cycle % Duty cycle 1% [m 3 /min] [CFM] [Pa] [inchh2o] [db (A)] [h] Inlet: 13 Outlet: 8 Inlet: 12 Outlet: 8 Inlet: 2 Outlet: 13 Inlet: 115 Outlet: 7 Inlet: 13 Outlet: 65 Inlet: 8 Outlet: 53 2.26 79.8 55 2.21 66 4 1.98 69.91 45 1.81 64 4 4.53 159.95 52 2.9 71 4 Size Model no. 4 4 56 mm 9CRB412P5S21 Plastic 12 1.8 to 13.2 4 4 56 mm 9CRB412P5K1 Plastic 12 1.8 to 13.2 4 4 56 mm 9CRB412P5J21 Plastic 12 1.8 to 13.2 * PWM frequency: 25 khz Frame Rated voltage PWM * Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life material [V] [V] [%] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] Inlet Outlet 1 1.4 16.8 22 197.9 31.8 145 4.197 68-2 to +7 4.9 1.8 38 35.15 5.3 31.124 26-2 to +7 4 1.88 1.56 19 17.76 26.83 73 2.93 62-2 to +7 4.11 1.32 57 51.21 7.41 67.26 33-2 to +7 4 1.72 8.64 173 16.71 25.1 65 2.61 61-2 to +7 4.7.84 345 32.13 4.59 26.1 24-2 to +7 4 Long Life Fan Size Model no. Frame material Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 6 6 25 mm 19L612G41 Aluminum 12 1.2 to 13.8.24 2.88 56.78 27.5 87.3.35 39-2 to +7 1 6 6 25 mm 19L612S41 Aluminum 12 1.2 to 13.8.17 2.4 46.65 23. 56.8.228 33-2 to +7 1 6 6 25 mm 19L612H41 Aluminum 12 1.2 to 13.8.11 1.32 38.53 18.7 4.2.161 28-2 to +7 1 6 6 25 mm 19L612F41 Aluminum 12 1.2 to 13.8.9 1.8 32.44 15.5 29.4.118 24-2 to +7 1 6 6 25 mm 19L612M41 Aluminum 12 1.2 to 13.8.6.72 26.36 12.7 19.6.79 2-2 to +7 1 6 6 25 mm 19L624D41 Aluminum 24 2.4 to 27.6.12 2.88 515.72 25.4 73.8.296 37-2 to +7 1 6 6 25 mm 19L624S41 Aluminum 24 2.4 to 27.6.8 1.92 46.65 23. 56.8.23 33-2 to +7 1 6 6 25 mm 19L624H41 Aluminum 24 2.4 to 27.6.6 1.44 38.53 18.7 4.2.161 28-2 to +7 1 6 6 25 mm 19L624F41 Aluminum 24 2.4 to 27.6.5 1.2 32.44 15.5 29.4.118 24-2 to +7 1 6 6 25 mm 19L624M41 Aluminum 24 2.4 to 27.6.4.96 26.36 12.7 19.6.79 2-2 to +7 1 6 6 25 mm 19L648G41 Aluminum 48 4.8 to 55.2.7 3.36 56.78 27.5 87.3.35 39-2 to +6 8 6 6 25 mm 19L648H41 Aluminum 48 4 to 53.4 1.92 38.53 18.7 4.2.161 28-2 to +7 1 566
Thermally Controlled Fan Size Model no. Frame material 52 52 15 mm 19P512T7H12 Plastic 12 1.2 to 13.8 52 52 15 mm 19P512T7H122 Plastic 12 1.2 to 13.8 6 6 15 mm 19P612T7H12 Plastic 12 1.2 to 13.8 6 6 15 mm 19P612T7H122 Plastic 12 1.2 to 13.8 6 6 2 mm 19P612T6H12 Plastic 12 1.2 to 13.8 6 6 2 mm 19P612T6H122 Plastic 12 1.2 to 13.8 6 6 25 mm 6 6 25 mm 19R612T4H12 19R612T4H121 19R612T4H122 19R612T4H123 Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] Plastic 12 1.2 to 13.8 Plastic 12 1.2 to 13.8 8 8 2 mm 19P812T6H12 Plastic 12 1.2 to 13.8 8 8 2 mm 19P812T6H122 Plastic 12 1.2 to 13.8 8 8 25 mm 8 8 25 mm 19R812T4H12 19R812T4H121 19R812T4H122 19R812T4H123 Plastic 12 1.2 to 13.8 Plastic 12 1.2 to 13.8.13 1.56 46.255 9. 31.9.128 27.9 1.8 23.13 4.6 8.8.35 17.13 1.56 49.27 9.5 36.2.145 28.9 1.8 24.14 4.9 9.6.39 17.12 1.44 41.4 14.1 38.2.153 32.8.96 25.2 7.1 9.3.37 18.12 1.44 43.42 14.8 42..169 32.8.96 21.2 7. 9.7.39 18.15 1.8 42.42 14.8 31.9.128 31.1 1.2 21.21 7.4 8.8.35 21.15 1.8 44.44 15.5 35..141 33.1 1.2 215.22 7.8 9.2.37 21.13 1.56 38.53 18.7 4.2.161 28.1 1.2 19.26 9.2 9.8.39 15.13 1.56 395.55 19.4 41.8.168 28.1 1.2 195.27 9.5 1.3.41 15.18 2.16 29.84 29.7 29.4.118 31.1 1.2 145.42 14.8 7.4.3 18.18 2.16 35.88 31. 32.5.131 32.1 1.2 145.42 14.8 7.4.3 2.14 1.68 29 1.3 36.4 35.3.142 29.9 1.8 145.51 18. 8.8.35 14.14 1.68 3 1.7 37.8 37.7.151 29.9 1.8 145.51 18. 8.8.35 14-1 to +7 6-1 to +7 6-1 to +7 6-1 to +7 6-1 to +7 6-1 to +7 6-1 to +6 6-1 to +6 6-1 to +6 6-1 to +6 6-1 to +6 6-1 to +6 6 Blower Size Model no. Frame material Rated voltage Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min -1 ] [m³/min] [CFM] [Pa] [inchh ² O] [db (A)] [ C] [h] 12 32 mm 19BF12HC2 Plastic 12 1.2 to 13.8.6 7.2 24.78 27.5 175.4.74 52-2 to +6 4 12 32 mm 19BF12MC2 Plastic 12 1.2 to 13.8.32 3.84 19.61 21.5 19.8.441 44-2 to +6 4 12 32 mm 19BF24HC2 Plastic 24 2.4 to 27.6.3 7.2 24.78 27.5 175.4.74 52-2 to +6 4 12 32 mm 19BF24MC2 Plastic 24 2.4 to 27.6.16 3.84 19.61 21.5 19.8.441 44-2 to +6 4 Storage temperature is -3 to +7 C. Deleted Models in this Catalog 567