A274-53-01A 1/28
INDEX PAGE 1. Evaluation Method 1-1. 測定回路 Circuit used for determination 測定回路 1 Circuit 1 used for determination 4 静特性 Steady state data 通電ドリフト特性 Warm up voltage drift characteristics 出力保持時間特性 Hold up time characteristics 出力立ち上がり特性 Output rise characteristics 出力立ち下がり特性 Output fall characteristics 過電流保護特性 Over current protection (OCP) characteristics 過電圧保護特性 Over voltage protection (OP) characteristics 入力電圧瞬停特性 Response to brown out characteristics 入力電流波形 Input current waveform 測定回路 2 Circuit 2 used for determination 4 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics 測定回路 3 Circuit 3 used for determination 5 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform 測定回路 4 Circuit 4 used for determination 5 リーク電流特性 Leakage current characteristics 測定回路 5 Circuit 5 used for determination 6 ON/OFFコントロール時出力立ち上がり 立下がり特性 Output rise, fall characteristics with ON/OFF Control 測定回路 6 Circuit 6 used for determination 6 出力リップル ノイズ波形 Output ripple and noise waveform 測定構成 Configuration used for determination 7 EMI 特性 Electro-Magnetic Interference characteristics (a) 雑音端子電圧 ( 帰還ノイズ ) Conducted Emission (b) 雑音電界強度 ( 放射ノイズ ) Radiated Emission 1-2. 使用測定機器 List of equipment used 8 2/28
PAGE 2. Characteristics 2-1. 静特性 Steady state data (1) 入力 負荷 温度変動 / 出力起動 遮断電圧 Regulation - line and load, Temperature drift / Start up voltage and Drop out voltage 9 (2) リップルノイズ電圧対入力電圧 Ripple noise voltage vs. Input voltage 10 (3) 効率 力率対出力電流 Efficiency and Power factor vs. Output current 11 (4) 入力電力対出力電流 Input power vs. Output current 12 (5) 入力電流対出力電流 Input current vs. Output current 13 2-2. 通電ドリフト特性 Warm up voltage drift characteristics 14 2-3. 出力保持時間特性 Hold up time characteristics 14 2-4. 出力立ち上がり特性 Output rise characteristics 15 2-5. 出力立ち下がり特性 Output fall characteristics 16 2-6. ON/OFFコントロール時出力立ち上がり 立下がり特性 (*) Output rise, fall characteristics with ON/OFF Control (*) 17 2-7. 過電流保護特性 Over current protection (OCP) characteristics 18 2-8. 過電圧保護特性 Over voltage protection (OP) characteristics 18 2-9. 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics 19 2-10. 入力電圧瞬停特性 Response to brown out characteristics 20 2-11. 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform 21 2-12. 高調波成分 Input current harmonics 22 2-13. 入力電流波形 Input current waveform 22 2-14. リーク電流特性 Leakage current characteristics 23 2-15. 出力リップル ノイズ波形 Output ripple and noise waveform 24 2-16. EMI 特性 Electro-Magnetic Interference characteristics 25-28 * 準標準品 -*/R, /RFO にて対応 For option model -*/R, /RFO 使用記号 Terminology used 定義 Definition in 入力電圧 Input voltage out 出力電圧 Output voltage Iin 入力電流 Input current Iout 出力電流 Output current Ta 周囲温度 Ambient temperature f 周波数 Frequency 当社測定条件における結果であり 参考値としてお考え願います Test results are reference data based on our measurement condition. 3/28
1. Evaluation Method 1-1. 測定回路 Circuit used for determination 測定回路 1 Circuit 1 used for determination 静特性 Steady state data 通電ドリフト特性 Warm up voltage drift characteristics 出力保持時間特性 Hold up time characteristics 出力立ち上がり特性 Output rise characteristics 出力立ち下がり特性 Output fall characteristics 過電流保護特性 Over current protection (OCP) characteristics 過電圧保護特性 Over voltage protection (OP) characteristics 入力電圧瞬停特性 Response to brown out characteristics 入力電流波形 Input current waveform Digital power meter SW1 A W + Load Power supply P.S. - Current probe Shunt res. Controlled temp. chamber 測定回路 2 Circuit 2 used for determination 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics Digital power meter SW1 A W + Dynamic dummy load Load 1 Power supply P.S. Load 2 Output current waveform Iout 50% <==> 100% - Shunt res. 100% 95% 55% 50% Min tr tf 4/28
測定回路 3 Circuit 3 used for determination 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform Digital power meter Slide Reg. Dynamic dip simulator A W P.S. + Load - Current probe Shunt res. 測定回路 4 Circuit 4 used for determination リーク電流特性 Leakage current characteristics Digital power meter Power supply Isolation trans Leakage current meter A W P.S. + Load - Shunt res. FG FG 接地 Earth 5/28
測定回路 5 Circuit 5 used for determination ON/OFF コントロール時出力立ち上がり 立下がり特性 Output rise, fall characteristics with ON/OFF Control 準標準品 -*/R, /RFO にて対応 For option model -*/R, /RFO * PF 信号端子は -*/RFO のみ対応 PF signal terminal is applied to only -*/RFO Digital power meter SW1 A W + Load Power supply P.S. - -R +R -PF +PF Shunt res. SW2 測定回路 6 Circuit 6 used for determination 出力リップル ノイズ波形 Output ripple and noise waveform SW1 Digital power meter A W + Oscilloscope Bandwidth : 20MHz Power supply P.S. C1 + C2 Coaxial cable 1.5m 50Ω Load R C3-150mm R : 50Ω C1 : 0.1uF Film cap. C2 : 47uF Elect cap. C3 : 4700pF Ceramic cap. 6/28
測定構成 Configuration used for determination EMI 特性 Electro-Magnetic Interference characteristics (a) 雑音端子電圧 ( 帰還ノイズ ) Conducted Emission EMI Test receiver spectrum analyzer 擬似電源回路網 AMN 50Ω/50uH 供試機器 ( 接地 ) D.U.T(Earthed) D=80cm アルミ板 Aluminum plate D=40cm 垂直基準大地面 (2m 2m) ertical ground reference plane 電源ケーブル Power cable 台 Stand H=80cm 接地 Earth 水平大地面 Horizontal ground plane 入力電源 Power supply (b) 雑音電界強度 ( 放射ノイズ ) Radiated Emission EMI Test receiver spectrum analyzer pre amp. アンテナ Antenna D=3m 電源ケーブル Power cable ターンテーブル Turn table 供試機器 ( 接地 ) D.U.T(Earthed) 台 Stand H=80cm アルミ板 Aluminum plate 接地 Earth 水平大地面 Horizontal ground plane 入力電源 Power supply 7/28
1-2. 使用測定機器 List of equipment used EQUIPMENT USED MANUFTURER MODEL NO. 1 DIGITAL STORAGE OSCILLOSCOPE YOKOGAWA ELECT. DLM2054 2 DIGITAL MULTIMETER AGILENT 34970A 3 DIGITAL POWER METER YOKOGAWA ELECT. WT310HC 4 DIGITAL POWER METER HIOKI 3331 / 3332 5 CURRENT PROBE YOKOGAWA ELECT. 701928 / 701930 6 DYNAMIC DUMMY LOAD KIKUSI PLZ1004W / PLZ2004WB 7 DYNAMIC DUMMY LOAD TEXIO LSG-1050 8 DUMMY LOAD PCN RHF250 SIRIES 9 SLIDE REGULATOR MATSUNAGA SD-2650 10 ISOLATION TRANS MATSUNAGA 3WTC-50K 11 CCF KIKUSUI PCR4000L / PCR4000LA 12 CCF KIKUSUI PCR4000LE / PCR6000LE 13 LEAKAGE CURRENT METER HIOKI 3156 14 DYNAMIC DIP SIMULATOR TAKAMISAWA PSA-210 15 CONTROLLED TEMP. CHAMBER ESPEC PL-1KP 16 EMI TEST RECEIER / SPECTRUM ANALYZER ROHDE & SCHWARZ ESCI 17 PRE AMP. SONOMA 310N 18 AMN SCHWARZBECK NNLK8121 19 ANTENNA SCHWARZBECK CBL6111D 20 HARMONIC / FLICKER ANALYZER KIKUSUI KHA1000 21 SINGLE-PHASE MASTER NF 4420 22 REFERENCE IMPEDANCE NETWORK 20A NF 4150 23 MULTI OUTLET UNIT KIKUSUI OT01-KHA 8/28
2. Characteristics 2-1. 静特性 Steady state data (1) 入力 負荷 温度変動 / 出力起動 遮断電圧 Regulation - line and load, Temperature drift / Start up voltage and Drop out voltage 1. Regulation - line and load Condition Ta : 25 C Iout \ in 90 100 200 265 Line regulation 0% 12.024 12.023 12.024 12.024 1m 0.008% 50% 11.988 11.989 11.989 11.990 2m 0.017% 100% 11.958 11.958 11.959 11.959 1m 0.008% Load regulation 66m 65m 65m 65m 0.550% 0.542% 0.542% 0.542% 2. Temperature drift Conditions in : 100 Iout : 100 % Ta -20 C +25 C +50 C Temperature stability out 11.993 11.958 11.948 45m 0.375% 3. Start up voltage and Drop out voltage Conditions Ta : 25 C Iout : 100 % Start up voltage (in) 77 Drop out voltage (in) 71 24 1. Regulation - line and load Condition Ta : 25 C Iout \ in 90 100 200 265 Line regulation 0% 23.967 23.968 23.969 23.969 2m 0.008% 50% 23.945 23.945 23.945 23.946 1m 0.004% 100% 23.930 23.930 23.931 23.931 1m 0.004% Load regulation 37m 38m 38m 38m 0.154% 0.158% 0.158% 0.158% 2. Temperature drift Conditions in : 100 Iout : 100 % Ta -20 C +25 C +50 C Temperature stability out 23.916 23.930 23.946 30m 0.125% 3. Start up voltage and Drop out voltage Conditions Ta : 25 C Iout : 100 % Start up voltage (in) 78 Drop out voltage (in) 72 48 1. Regulation - line and load Condition Ta : 25 C Iout \ in 90 100 200 265 Line regulation 0% 47.997 47.997 47.997 47.997 0m 0.000% 50% 47.978 47.978 47.978 47.979 1m 0.002% 100% 47.969 47.969 47.970 47.970 1m 0.002% Load regulation 28m 28m 27m 27m 0.058% 0.058% 0.056% 0.056% 2. Temperature drift Conditions in : 100 Iout : 100 % Ta -20 C +25 C +50 C Temperature stability out 47.930 47.969 47.986 56m 0.117% 3. Start up voltage and Drop out voltage Conditions Ta : 25 C Iout : 100 % Start up voltage (in) 78 Drop out voltage (in) 71 9/28
(2) リップルノイズ電圧対入力電圧 Ripple noise voltage vs. Input voltage Ripple noise voltage vs. Input voltage Conditions Iout : 100 % Ta : -20 C 25 C 50 C 24 48 Ripple noise voltage (m) Ripple noise voltage (m) Ripple noise voltage (m) 140 120 100 80 60 40 20 0 50 100 150 200 250 Input voltage () 140 120 100 80 60 40 20 0 50 100 150 200 250 Input voltage () 420 360 300 240 180 120 60 0 50 100 150 200 250 Input voltage () 10/28
(3) 効率 力率対出力電流 Efficiency and Power factor vs. Output current Efficiency and Power factor vs. Output current Conditions in : 90 100 200 265 90 1.0 Efficiency (%) 80 70 60 Power factor 0.9 0.8 0.7 50 0.6 24 90 1.0 Efficiency (%) 80 70 60 Power factor 0.9 0.8 0.7 50 0.6 48 90 1.0 Efficiency (%) 80 70 60 Power factor 0.9 0.8 0.7 50 0.6 11/28
(4) 入力電力対出力電流 Input power vs. Output current Input power vs. Output current Conditions in : 90 100 200 265 2400 in Iout : 0% Control OFF* 90 24.4W 2.8W 100 24.3W 2.6W 200 24.1W 2.8W 265 23.3W 2.9W 24 Input power Input power (W) 1800 1200 600 0 2400 in Iout : 0% Input power Control OFF* 90 26.7W 2.7W 100 26.6W 2.7W 200 26.4W 2.8W 265 25.6W 2.8W Input power (W) 1800 1200 600 0 48 2400 in Iout : 0% Input power Control OFF* 90 29.8W 3.0W 100 29.6W 2.9W 200 29.2W 2.8W 265 28.4W 2.9W Input power (W) 1800 1200 600 0 * 準標準品 -*/R, /RFO にて対応 For option model -*/R, /RFO 12/28
(5) 入力電流対出力電流 Input current vs. Output current Input current vs. Output current Conditions in : 90 100 200 265 24.0 in Iout : 0% Control OFF* 90 0.35A 0.12A 100 0.32A 0.13A 200 0.32A 0.25A 265 0.39A 0.33A 24 Input current Input current (A) 18.0 12.0 6.0 0.0 24.0 in Iout : 0% Input current Control OFF* 90 0.38A 0.12A 100 0.37A 0.13A 200 0.32A 0.25A 265 0.41A 0.33A Input current (A) 18.0 12.0 6.0 0.0 48 24.0 in Iout : 0% Input current Control OFF* 90 0.41A 0.12A 100 0.38A 0.13A 200 0.34A 0.25A 265 0.41A 0.32A Input current (A) 18.0 12.0 6.0 0.0 * 準標準品 -*/R, /RFO にて対応 For option model -*/R, /RFO 13/28
2-2. 通電ドリフト特性 2-3. 出力保持時間特性 Warm up voltage drift characteristics Hold up time characteristics 0.2 Conditions in : 100 Conditions in : 100 Iout : 100 % 200 Ta : 25 C Ta : 25 C 1000 Output voltage drift (%) 0.1 0.0-0.1 Hold up time (ms) 100-0.2 0 1 2 3 4 5 6 7 8 Time (hours) 10 24 0.2 1000 Output voltage drift (%) 0.1 0.0-0.1 Hold up time (ms) 100-0.2 0 1 2 3 4 5 6 7 8 Time (hours) 10 48 0.2 1000 Output voltage drift (%) 0.1 0.0-0.1 Hold up time (ms) 100-0.2 0 1 2 3 4 5 6 7 8 Time (hours) 10 14/28
2-4. 出力立ち上がり特性 Output rise characteristics Output rise characteristics Conditions in : 90 (A) 100 (B) 200 (C) 265 (D) Iout : 0% Iout : 100% D C BA out D C BA 0 in 5/DI 200ms/DI 5/DI 200ms/DI 24 D C BA Iout : 0% Iout : 100% D C BA out 0 in 10/DI 200ms/DI 10/DI 200ms/DI 48 D C BA Iout : 0% Iout : 100% out D C BA 0 in 20/DI 200ms/DI 20/DI 200ms/DI 15/28
2-5. 出力立ち下がり特性 Output fall characteristics Output fall characteristics Conditions in : 90 (A) 100 (B) 200 (C) 265 (D) Iout : 0% Iout : 100% ABCD ABCD out 0 in 5/DI 1s/DI 5/DI 20ms/DI 24 ABCD Iout : 0% Iout : 100% out ABCD 0 in 10/DI 1s/DI 10/DI 20ms/DI 48 ABCD Iout : 0% Iout : 100% out ABCD 0 in 20/DI 1s/DI 20/DI 20ms/DI 16/28
2-6. ON/OFF コントロール時出力立ち上がり 立下がり特性 Output rise, fall characteristics with ON/OFF Control 準標準品 -*/R, /RFO にて対応 For option model -*/R, /RFO * PF 信号は -*/RFOのみ対応 PF signal is applied to only -*/RFO Conditions in : 100 Iout : 100 % Ta : 25 C out 0 PF Signal ON/OFF Control 5/DI 50ms/DI 5/DI 5ms/DI 24 out 0 PF Signal ON/OFF Control 10/DI 50ms/DI 10/DI 5ms/DI 48 out 0 PF Signal ON/OFF Control 20/DI 50ms/DI 20/DI 5ms/DI 17/28
2-7. 過電流保護特性 2-8. 過電圧保護特性 Over current protection (OCP) characteristics Over voltage protection (OP) characteristics Conditions in : 100 Conditions in : 100 Ta : -20 Iout : 0 % 25 50 16 Output voltage () 12 8 4 out 0 OP Point 0 0 50 100 150 200 5/DI 1s/DI 24 32 Output voltage () 24 16 8 out 0 OP Point 0 0 50 100 150 200 10/DI 1s/DI 48 64 Output voltage () 48 32 16 out 0 OP Point 0 0 50 100 150 200 20/DI 1s/DI 18/28
2-9. 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics Dynamic load response characteristics Conditions in : 100 Iout : 50 % 100 % (tr = tf = 75us) f = 100Hz f = 1kHz out Iout Iout:0% 500m/DI 2ms/DI 500m/DI 200µs/DI +1.32% -1.33% +1.36% -1.29% 24 f = 100Hz f = 1kHz out Iout Iout:0% 500m/DI 2ms/DI 500m/DI 200µs/DI +0.44% -0.40% +0.35% -0.39% 48 f = 100Hz f = 1kHz out Iout Iout:0% 500m/DI 2ms/DI 500m/DI 200µs/DI +0.35% -0.34% +0.37% -0.37% 19/28
2-10. 入力電圧瞬停特性 Response to brown out characteristics Response to brown out characteristics Conditions Iout : 100% 瞬停時間 Interruption time A : 出力電圧が低下なし Output voltage does not drop. B : 出力電圧の低下が0までいかない Output voltage drop down not reaching 0. C : 出力電圧が0まで低下 Output voltage drops until 0. in : 100 A = 23ms, B = 37ms, C = 45ms B A C in : 200 A = 24ms, B = 39ms, C = 46ms B A C out 0 in 5/DI 100ms/DI 5/DI 100ms/DI 24 in : 100 A = 25ms, B = 38ms, C = 44ms B A C in : 200 A = 27ms, B = 39ms, C = 44ms B A C out 0 in 10/DI 100ms/DI 10/DI 100ms/DI 48 in : 100 A = 26ms, B = 40ms, C = 44ms B A C in : 200 A = 27ms, B = 41ms, C = 45ms B A C out 0 in 20/DI 100ms/DI 20/DI 100ms/DI 20/28
2-11. 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform Conditions in : 100 Iout : 100% Switch on phase angle of input voltage φ = 0 Switch on phase angle of input voltage φ = 90 Iin in 20A/DI 100ms/DI 20A/DI 100ms/DI Conditions in : 200 Iout : 100% Switch on phase angle of input voltage φ = 0 Switch on phase angle of input voltage φ = 90 Iin in 20A/DI 100ms/DI 20A/DI 100ms/DI 21/28
2-12. 高調波成分 Input current harmonics Input current harmonics Conditions Iout : 100% Harmonic current (A) 100.000 10.000 1.000 0.100 0.010 0.001 100.000 10.000 in : 100 JIS C61000-3-2 Limit (class A) 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Harmonic order in : 230 IEC61000-3-2 Limit (class A) Harmonic current (A) 1.000 0.100 0.010 0.001 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Harmonic order 2-13. 入力電流波形 Input current waveform Input current waveform Conditions Iout : 100% in : 100 in : 230 Iin in 20A/DI 5ms/DI 20A/DI 5ms/DI 22/28
2-14. リーク電流特性 Leakage current characteristics Leakage current characteristics Conditions Iout : 0 % 100 % Ta : 25 C Equipment used : 3156 (HIOKI) 0.7 0.6 0.5 f : 50 Hz Leakage current (ma) 0.4 0.3 0.2 0.1 0.0 80 120 160 200 240 280 Input voltage () 0.7 0.6 0.5 f : 60 Hz Leakage current (ma) 0.4 0.3 0.2 0.1 0.0 80 120 160 200 240 280 Input voltage () 23/28
2-15. 出力リップル ノイズ波形 Output ripple and noise waveform ripple and noise waveform Conditions in : 100 Iout : 100 % 24 20m/DI 2µs/DI 48 20m/DI 2µs/DI 20m/DI 2µs/DI 24/28
2-16. EMI 特性 Electro-Magnetic Interference characteristics Electro-Magnetic Interference characteristics Conditions in : 230 Iout : 100 % 雑音端子電圧 Conducted Emission Point A (165kHz) Ref. Limit Measure Data (db) (db) QP 65.2 47.0 A Phase : N B CCI Class B QP Limit A 55.2 46.9 Point B (14.0MHz) Ref. Limit Measure Data (db) (db) CCI Class B A Limit QP 60.0 43.8 A 50.0 41.6 Point C (163kHz) Ref. Limit Measure Data (db) (db) QP 65.3 51.7 C Phase : L D CCI Class B QP Limit A 55.3 49.7 Point D (14.0MHz) Ref. Limit Measure Data (db) (db) Phase : L CCI Class B A Limit QP 60.0 44.9 A 50.0 42.7 EN55011-B,EN55022-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. 25/28
雑音端子電圧 Conducted Emission Conditions in : 230 Iout : 100 % 24 Point A (3.9MHz) Ref. Limit Measure Data (db) (db) QP 56.0 36.9 A Phase : N B CCI Class B QP Limit A 46.0 35.8 Point B (13.7MHz) Ref. Limit Measure Data (db) (db) CCI Class B A Limit QP 60.0 45.3 A 50.0 40.4 Point C (3.9MHz) Ref. Limit Measure Data (db) (db) QP 56.0 41.9 C Phase : L D CCI Class B QP Limit A 46.0 40.5 Point D (13.5MHz) Ref. Limit Measure Data (db) (db) Phase : L CCI Class B A Limit QP 60.0 45.9 A 50.0 40.7 EN55011-B,EN55022-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. 26/28
雑音端子電圧 Conducted Emission Conditions in : 230 Iout : 100 % 48 Point A (168kHz) Ref. Limit Measure Data (db) (db) QP 65.1 46.0 A Phase : N B CCI Class B QP Limit A 55.1 44.0 Point B (4.5MHz) Ref. Limit Measure Data (db) (db) CCI Class B A Limit QP 56.0 42.0 A 46.0 38.9 Point C (167kHz) Ref. Limit Measure Data (db) (db) QP 65.1 41.9 C Phase : L D CCI Class B QP Limit A 55.1 36.9 Point D (4.6MHz) Ref. Limit Measure Data (db) (db) Phase : L CCI Class B A Limit QP 56.0 43.8 A 46.0 40.0 EN55011-B,EN55022-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. 27/28
雑音電界強度 Radiated Emission HORIZONTAL Conditions in : 230 Iout : 100 % ERTICAL QP QP 24 HORIZONTAL ERTICAL QP QP 48 HORIZONTAL ERTICAL QP QP EN55011-B,EN55022-Bの限界値はCCI class Bの限界値と同じ Limit of EN55011-B,EN55032-B are same as its CCI class B. 表示はピーク値 Indication is peak values. 28/28