untitled - PDF 無料ダウンロード

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control (With Storage Temperature 3 to 7 Non-condensing PWM control function) brown 8 8 15mm Mass 65g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) Model No. V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 9GA812P7G1 1.29 3.48 6,1 1.44 5.9 84..34 41 12 1.2 to 13.8 9GA812P7S1 1.17 2.4 5, 1.18 41.7 56.4.23 37 4,/6 2 to 7 9GA824P7G1 1.13 3.12 6,1 1.44 5.9 84..34 41 (7,/4 ) 24 2.4 to 27.6 9GA824P7S1 1.8 1.92 5, 1.18 41.7 56.4.23 37 Note 1: Fan does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Model No. The following nos. have pulse sensors and ribs. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V A W min m³/min Pa inchh ² O db(a) h 9GA812H71 12 6 to 13.2.9 1.8 3,8.89 31.4 32.6.13 29 9GA824H71 24 12 to 26.4.5 1.2 3,8.89 31.4 32.6.13 29 Note: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Lock Sensor Please inquire as the availability of these functions depend on the model. PWM Control PWM 2 to 7 4,/6 (7,/4 ) Dimensions Unit : mm (With PWM speed control function With pulse sensor) 4-4.5.3 Mounting Hole 8.5 71.5.3 +5 3 71.5.3 8.5 Rotating Direction (1) Lead Wire AWG28 UL17 (4) (4) 15.5 Air Flow Direction 81

Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 9 4-4.5 71.5.3 DC Fan 8mm Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 71.5.3 7.5 4-2.5 4-4.3.3 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 82

DC Fan 8mm sq. San Ace 8 8 8 15mm Mass 65g Air Flow - Static Pressure Characteristics PWM With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 DC PWM 1% 5% 8.3 6.2 4.1 2 DC PWM 1% 5% With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 DC 24V PWM 1% 5%.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA812P7G1.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA812P7S1.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA824P7G1 Operating Voltage Range With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 PWM PWM 1 1 13.8V 1.2V With PWM speed control function With pulse sensor 8.3 6.2 4.1 2 PWM PWM 1 1 13.8V 1.2V With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 PWM PWM 1 1 27.6V 24V 2.4V.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA812P7G1.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 Air Flow 9GA812P7S1.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA824P7G1 PWM Duty - Speed Characteristics Example With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor 6, Voltage DC DC 6,1min -1 5, 4, 3, 2, 1, Voltage DC DC PWM 6, 5, 5,min -1 4, 3, 2, 1, 6, Voltage 24V DC24V DC 6,1min -1 5, 4, 3, 2, 1, 1 9GA812P7G1 1 9GA812P7S1 1 9GA824P7G1 83

DC Fan 8mm With PWM speed control function With pulse sensor 8.3 DC 24V.2.1 6 4 2 PWM 1% 5%.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA824P7S1 With PWM speed control function With pulse sensor 8.3 6.2 4.1 2 PWM PWM 1 1 27.6V 24V 2.4V.2 5 4.15 3.1 2.5 1 With pulse sensor 13.2V/26.4V 6V/.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA824P7S1.2.4.6.8 1. 1 2 3 Air Flow 9GA812H71 9GA824H71 With PWM speed control function With pulse sensor DC24V Voltage 24V DC 6, 5, 5,min -1 4, 3, 2, 1, 1 9GA824P7S1 84

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 15mm Mass 68g Specifications The following nos. have pulse sensors and ribs. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 19P812H71.2 2.4 3,1.91 32.1 29.4.118 31 4, 12 7 to 13.8 19P812M71.9 1.8 2,.57 2.1 12.6.51 21 6, 2 to 7 19P824H71.1 2.4 3,1.91 32.1 29.4.118 31 4, 24 14 to 27.6 19P824M71.5 1.2 2,.57 2.1 12.6.51 21 6, Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor Dimensions Unit : mm 8.5 71.5.3 8.5 71.5.3 4-4.3.3 Mounting Hole Lead Wire AWG24 UL17 +3 3 3.5 3.5 1 71.5.3 4-4.5 71.5.3 4-4.5 78 84 71.5.3 78 89.5 71.5.3 +1 15 Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side Outlet side 78 78 85

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 2mm Mass 8g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 4,/6 9GA812P6G1.3 3.6 5,85 1.72 6.78 11.44 45 12 1.2 to 13.8 1 (7,/4 ) 9GA812P6M1.6.72 2,9.84 29.68 27.11 26.5 6,/6 2 to 7 4,/6 9GA824P6G1.15 3.6 5,85 1.72 6.78 11.44 45 24 2.4 to 27.6 1 (7,/4 ) 9GA824P6M1.3.72 2,9.84 29.68 27.11 26.5 6,/6 Note 1: Does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Lock Sensor PWM Dimensions Unit : mm 4 4.5.3 Mounting Hole (4) 2.5 (4) Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 4-4.5 8.5 71.5.3 +5 3 (1) 9 71.5.3 71.5.3 8.5 Rotating Direction Lead Wire AWG26 UL17 Air Flow Direction Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver 15.5 Outlet side 4.3.3 39.6 5 1 Model 19-49E 19-49H 15.5 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 11.2 11.2 87

Options Unit : mm Resin finger guards Model 19-12G 71.5.3 71.5.3 7.5 4-2.5 4-4.3.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 71.5.3 1.5.5 4-4.3.3 DC Fan 8mm 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics PWM Static Pressure 14.5 12.4 1 8.3 6.2 4.1 2 DC PWM 1% 5%.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Static Pressure.16 4 DC.14.12 3 PWM.1 1%.8 2.6.4 1 5%.2.2.4.6.8 1. 5 1 15 2 25 3 35 9GA812P6G1 9GA812P6M1 9GA824P6G1 9GA824P6M1 Operating Voltage Range Static Pressure 14 PWM PWM 1 1.5 12 13.8V/27.6V.4 1 1.2V/2.4V 8.3 6.2 4.1 2.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Air Flow 9GA812P6G1 9GA824P6G1 Static Pressure.16 4.14.12 3.1.8 2 PWM PWM 1 1 13.8V/27.6V 1.2V/2.4V.6.4 1.2.2.4.6.8 1. 5 1 15 2 25 3 35 9GA812P6M1 9GA824P6M1 PWM Duty - Speed Characteristics Example Voltage DC DC / DC24V / 24V DC 7,5 5, 2,5 5,85min -1 1 9GA812P6G1 9GA824P6G1 Voltage DC / DC DC24V / 24V DC PWM 3, 2,9min -1 2, 1, 1 9GA812P6M1 9GA824P6M1

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing Model no. 19P812C61 is not certified. 8 8 2mm Mass 1g Specifications The following nos. have pulse sensors and ribs. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 19P812C61.29 3.48 3,7 1.7 37.8 46.185 39 2 to 6 19P812H61 12 1.2 to 13.8.21 2.52 2,9.84 29.7 29.4.118 31 19P812M61.13 1.56 2,3.67 23.7 18.6.75 25 2 to 7 19P824H61.12 2. 2,9.84 29.7 29.4.118 31 24 2.4 to 27.6 19P824M61.7 1.68 2,3.67 23.7 18.6.75 25 19P848C61.8 3.84 3,7 1.7 37.8 46.185 39 2 to 7 48 38 to 57.6 19P848H61.5 2.4 2,9.84 29.7 29.4.118 31 2 to 6 Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor 6, 4, Dimensions Unit : mm 8.5 71.5.3 4-4.3.3 Mounting Hole 3.5 2-1 3.5 1 78 71.5.3 78 89.5 71.5.3 8.5 71.5.3 +3 3 Lead Wire AWG24 UL17 Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side Outlet side 71.5.3 4-4.5 71.5.3 4-4.5 78 78 89

Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 DC Fan 8mm 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics.25.2.15.1.5 7 6 5 4 3 2 1 C speed.5 13.8V 12 V 1.2V 1. 1.5.16.14.12.1.8.6.4.2 4 3 2 1.5 13.8V/27.6V 1.2V/2.4V 1 2 3 4 5 1 2 3 4 1 2 3 4 Air Flow 19P812C61 H speed 19P812H61 19P824H61 1..12.1.8.6.4.2 3 2 1 M speed.5 13.8V/27.6V 1.2V/2.4V 19P812M61 19P824M61 1..3.25.2.15.1.5 C speed 7 6 57.6V 5 48V 4 38V 3 2 1.5 1. 1.5 1 2 3 4 5 6 19P848C61 H speed.18.16 4.14 57.6V.12 3.1 48 V.8 2.6 38V.4 1.2.5 1. 1.5 1 2 3 4 5 Air Flow 19P848H61 9

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 25mm Mass 11g GA type Low Noise Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA812P4J1 1.6 7.2 7,4 2.7 73. 177.6.7 48 25.8.96 2,5.69 24.3 2.2.8 21 9GA812P4G1 12 1.8 to 13.2 1.48 5.76 6,8 1.91 67.4 15.6 45 25.6.72 1,5.42 14.8 7.2.2 17 1.22 2.64 5,2 1.46 51.5 87.7.35 37 9GA812P4H1 25.6.72 1,6.44 15.5 8.3.3 17 4,/6 2 to 7 1.28 6.72 7,4 2.7 73. 177.6.7 48 (7,/4 ) 9GA824P4J1 25.6 1.44 2,8.78 27.5 25.4.1 23 9GA824P4G1 24 21.6 to 26.4 1.21 5.4 6,8 1.91 67.4 15.6 45 25.4.96 2,1.58 2.4 14.3.5 19 9GA824P4H1 1.1 2.4 5,2 1.46 51.5 87.7.35 37 25.2.48 1,5.42 14.8 7.2.2 17 Note: Expected life at 4 ambient is just reference value. PWM Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor Dimensions Unit : mm (With ribs) 4 4.5.3 Mounting Hole 8.5 71.5.3 +5 3 (1) 71.5.3 8.5 Lead Wire AWG26 UL17 (4) 25.2.5 (4) Rotating Direction Air Flow Direction 91

Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 4-4.5 DC Fan 8mm 9 71.5.3 Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 71.5.3 7.5 4-2.5 4-4.3.3 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 92

DC Fan 8mm sq. San Ace 8 8 8 25mm Mass 11g Air Flow - Static Pressure Characteristics PWM.8 2.7 18.6 16 14.5 12.4 1.3 8.2 6 4.1 2 25%.5 1. 1.5 2. DC PWM 1% 6% 2.5 2 4 6 8 9GA812P4J1.7 DC 18 16.6 14 PWM.5 1% 12.4 1.3.2 8 6 6% 4.1 2 25%.5 1. 1.5 2. 2.5 m /min 2 4 6 8 9GA812P4G1.4 1.35 9.3 8 7.25 6.2 5.15 4.1 3 2.5 1 DC PWM 1% 25% 6%.5 1. 1.5 2. 1 2 3 4 5 6 7 9GA812P4H1 Operating Voltage Range.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 PWM PWM 1 1 13.2V 1. 1.5 2. 2 4 6 1.8V 2.5 8 9GA812P4J1 PWM PWM 1 1.7 18 16.6 14.5 13.2V 12.4 1.3 8.2 6 4.1 2.5 1. 1.8V 1.5 2. 2.5 2 4 6 8 9GA812P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM PWM 1 1 13.2V 1.8V.5 1. 1.5 2. 1 2 3 4 5 6 7 9GA812P4H1 PWM Duty - Speed Characteristics Example Voltage DC DC 8, 7, 6, 5, 4, 3, 2, 1, 7,4min -1 Voltage DC DC 7, 6, 5, 4, 3, 2, 1, 6,8min -1 Voltage DCDC PWM 7, 6, 5, 4, 3, 2, 1, 5,2min -1 1 1 1 9GA812P4J1 9GA812P4G1 9GA812P4H1 93

DC Fan 8mm.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 1. 1.5 2. 2 4 6 DC 24V PWM 1% 6% 25% 9GA824P4J1 2.5 8 Static Pressure.7 18 16.6 14.5 12.4 1.3.2.1 8 6 4 2 DC 24V PWM 1% 6% 25%.5 1. 1.5 2. 2.5 2 4 6 8 Air Flow 9GA824P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 25% DC 24V PWM 1% 6%.5 1. 1.5 2. 1 2 3 4 5 6 7 9GA824P4H1.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 PWM PWM 1 26.4V 24V 1. 1.5 2. 2 4 6 21.6V 2.5 8 9GA824P4J1 PWM PWM 1 1.7 18 16.6 14.5 26.4V 12.4 1 24V.3 8.2 6 4.1 2.5 1. 21.6V 1.5 2. 2.5 2 4 6 8 Air Flow 9GA824P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM PWM 1 1 26.4V 24V 21.6V.5 1. 1.5 2. 1 2 3 4 5 6 7 9GA824P4H1 Voltage 24V DC24V DC 8, 7, 6, 5, 4, 3, 2, 1, 7,4min -1 Voltage 24V DC24V DC 7, 6, 5, 4, 3, 2, 1, 6,8min -1 Voltage 24V DC24V DC PWM 7, 6, 5, 4, 3, 2, 1, 5,2min -1 1 9GA824P4J1 1 9GA824P4G1 1 9GA824P4H1 94

DC Fan 8mm sq. General Specifications San Ace 8 Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 25mm Massg S type 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Silent Fan Model no. 9S812H41 is not TÜV certified. Specifications The following nos. have pulse sensors and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 9S812H41 5. to 13.2.23 2.76 3,4 1.12 39.5 52.15.2 31 9S812F41.11 1.32 2,8.93 32.8 35.5.143 24 12 5. to 13.8 9S812M41.8.96 2,5.83 29.3 27.5.11 22 9S812L41 6. to 13.8.5.6 2,.66 23.3 18.1.73 16 9S824M41.6 1.44 2,5.83 29.3 27.5.11 22 24 1 to 26.4 9S824L41.4.96 2,.66 23.3 18.1.73 16 Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Control 1 to 7 4, Dimensions Unit : mm With ribs 4-4.3.3 Mounting Hole 4 25.5 4 8.5 71.5.3 Lead Wire AWG24 UL17 +5 3 1 71.5.3 8.5 Air Flow Direction Rotating Direction Reference dimension of mounting holes and vent opening Unit : mm 4-4.5 71.5.3 9 71.5.3 95

Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 DC Fan 8mm 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics 7.25 6.2 5 4.15 3.1 2.5 1 H speed 13.2V 5V.2 5 4.15 3.1 2.5 1 F speed 13.8V 5V.2 5.15 4 3.1 2.5 1 M speed 13.8V/26.4V 5V/1V.2.4.6.8 1. 1.2 1.3 1 2 3 4 5 9S812H41.2.4.6.8 1. 1.2 5 1 15 2 25 3 35 4 9S812F41.2.4.6.8 1. 5 1 15 2 25 3 35 9S812M41 9S824M41.2 5 L speed.15.1.5 4 3 2 1 13.8V/26.4V 6V/1V.2.4.6.8 1. 5 1 15 2 25 3 35 9S812L41 9S824L41 96

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 25mm Mass 125g GV type Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 1.87 1.4 5,6 2.12 74.8 173..69 52 9GV812P4K3.1 1.2 1,4.5 18.7 1.3.4 18 12 1.2 to 13.8 1.47 5.6 4,5 1.72 6.7 11..44 46 9GV812P4J3.7.8 1,2.45 16.2 7.5.3 14 2 to 7 4, 1.44 1.56 5,6 2.12 74.8 173.69 52 9GV824P4K1 24 2.4 to 27.6.6 1.44 1,4.53 18.7 1.8.4 18 1.22 1.56 5,6 2.12 74.8 173..69 52 9GV848P4K3 48 43 to 53.4 1.92 1,5.57 2.1 12.4.5 19 Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Dimensions Unit : mm With ribs 4-4.5.3 Mounting Hole Lead Wire AWG26 UL17 8.5 71.5.3 +3 3 1 71.5.3 8.5 4 25.2.5 4 Rotating Direction Air Flow Direction 97

11.2 Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 9 4-4.5 71.5.3 7.5 DC Fan 8mm 4-2.5 4-4.3.3 71.5.3 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 15.5 39.6 Model 19-49E 19-49H Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 11.2 71.5.3 4-1.5 4-2.5 98

DC Fan 8mm sq. San Ace 8 8 8 25mm Mass 125g Air Flow - Static Pressure Characteristics PWM.8 2 DC 12 DC.8 2 DC 24V.6.4.2 15 1 5.5 1. 1.5 2. 2.5 % 5% PWM 1% 2 4 6 8 2 4 6 2 4 6 8 9GV812P4K3.4.3.2.1 1 8 6 4 2 % 5% PWM 1%.5 1. 1.5 2. 9GV812P4J3.6.4.2 15 1 5.5 1 PWM 1% % 5% 1.5 9GV824P4K1 2 2.5 Operating Voltage Range 1. 25.8 2.6 15.4 1.2 5 PWM 1 1 PWM 1 1 PWM PWM 1 1 13.8 V 12 V 1.2 V.5 1. 1.5 2. 2.5 14.5 12.4 1 8.3 6.2 4.1 2 13.8V 1.2V.5 1. 1.5 2. 2 4 6 8 2 4 6 2 4 6 8 Air Flow Air Flow Air Flow 9GV812P4K3 9GV812P4J3 9GV824P4K1.8 2.6 15.4 1.2 5.5 27.6V 24V 2.4V 1 1.5 2 2.5 PWM Duty - Speed Characteristics Example Voltage DC DC 6, 5,6min -1 5, 4, 3, 2, 1,4min -1 1, 1 9GV812P4K3 Voltage DC DC 6, 5, 4,5min -1 4, 3, 2, 1, 1,2min -1 1 9GV812P4J3 Voltage 24V DC24V DC 6 5,6min -1 5 4 3 2 1 1,4min -1 1 9GV824P4K1 99

DC Fan 8mm.8 2 DC 48V Static Pressure.6.4.2 15 1 5 PWM 1% 5% %.5 1 1.5 2 2.5 2 4 6 8 Air Flow 9GV848P4K3.8 2 PWM PWM 1 Static Pressure.6.4.2 15 1 5 53V 48V 43V.5 1 1.5 2 2 4 6 8 Air Flow 9GV848P4K3 2.5 Voltage 48V DC48V DC 6, 5,6min -1 5, 4, 3, 2, 1,5min -1 1, 1 9GV848P4K3 1

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing Model no. 19R812E41 is not certified. 8 8 25mm Mass 11g Specifications The following nos. have pulse sensors and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 19R85F41.25 1.25 2,6.92 32.5 28.4.114 26 5 4.5 to 5.5 19R85M41.17.85 2,35.83 29.3 22.5.9 23 2 to 7 6, 19R812G41 1.8 to 13.2.37 4.44 4,5 1.5 53. 8.4.323 4 19R812E41.24 2. 3,7 1.31 46.3 57.8.232 35 2 to 6 4, 19R812S41.18 2.16 3,4 1.2 42.4 48..193 34 19R812H41 12 6 to 13.8.13 1.56 2,9 1.3 36.4 35.3.142 29 19R812F41.11 1.32 2,6.92 32.5 28.4.114 26 2 to 7 6, 19R812M41.9 1.8 2,35.83 29.3 22.5.9 23 19R812L41 7 to 13.8.6.72 1,85.65 23. 14.7.59 2 19R824G41 2.4 to 26.4.2 4.8 4,5 1.5 53. 8.4.323 4 2 to 6 4, 19R824S41.1 2.4 3,4 1.2 42.4 48..193 34 19R824H41.7 1.68 2,9 1.3 36.4 35.3.142 29 24 12 to 27.6 19R824F41.6 1.44 2,6.92 32.5 28.4.114 26 2 to 7 6, 19R824M41.5 1.2 2,35.83 29.3 22.5.9 23 19R824L41 14 to 27.6.4.96 1,85.65 23. 14.7.59 2 19R848K41.1 4.8 4,6 1.56 55.1.4.355 41 2 to 6 4, 48 4.8 to 55.2 19R848S41.6 2. 3,4 1.2 42.4 48..193 34 2 to 7 6, Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor Low speed Sensor PWM Control Dimensions Unit : mm With ribs 8.5 71.5.3 4-4.3.3 Mounting Hole 3 25.5 3 8.5 71.5.3 Lead Wire AWG24 UL17 +3 3 1 Rotating Direction Air Flow Direction 11

Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 9 4-4.5 71.5.3 DC Fan 8mm Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 71.5.3 7.5 4-2.5 4-4.3.3 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 11.2 4-1.5 4-2.5 12

DC Fan 8mm sq. San Ace 8 8 8 25mm Mass 11g Air Flow - Static Pressure Characteristics.45.4.35.3.25.2.15.1.5 11 1 9 8 7 6 5 4 3 2 1 K speed G speed G speed.5 55.2V 48V 4.8V 1. 1.5 2..4.35.3.25.2.15.1.5 1 9 13.2V 8 7 1.8V 6 5 4 3 2 1.2.4.6.8 1. 1.2 1.4 1.6 1.8 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Air Flow.4.35.3.25.2.15.1.5 1 9 26.4V 8 24V 7 2.4V 6 5 4 3 2 1.2.4.6.8 1. 1.2 1.4 1.6 1.8 19R848K41 19R812G41 19R824G41.2.175.15.125.1.75.5.25 5 4 3 2 1 H speed F speed F speed 13.8V/27.6V 6V/.5 1. 1.5 1 2 3 4 5 Air Flow.2.175.15.125.1.75.5.25 5 4 3 2 1 5.5V 5V 4.5V.5 1. 1.5 1 2 3 4 5 Air Flow.2.175.15.125.1.75.5.25 5 4 3 2 1 13.8V/27.6V 6V/.5 1. 1.5 1 2 3 4 5 Air Flow 19R812H41 19R824H41 19R85F41 19R812F41 19R824F41 13

DC Fan 8mm.3.25.2.15.1.5 7 6 5 4 3 2 1.16.14.12.1.8.6.4.2.5 13.8V/27.6V 6V/ 1. 1.5.3.25.2.15.1.5 7 6 5 4 3 2 1 55.2V.5 48V 4.5V 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 6 7 19R812S41 19R824S41 4 3 2 1 S speed 5.5V 5V 4.5V.4.8 1.2 1 2 3 4.16.14.12.1.8.6.4.2 4 3 2 1 1. 19R848S41 S speed 1.5 13.8V/27.6V 6V/.4.8 1.2 1 2 3 4 Static Pressure.4.35.3.25.2.15.1.5 1 8 6 4 2.1.9.8.7.6.5.4.3.2.1 25 2 15 1 5 6V 13.8V.5 1. 1.5 19R812E41.2 E speed M speed M speed L speed.4.6 2. 13.8V/27.6V 7V/14V.8 5 1 15 2 25 3 19R85M41 19R812M41 19R824M41 19R812L41 19R824L41 14

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 25mm Mass 9g San Cooler Specifications The following nos. have pulse sensors and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 9A812G41 6 to 13.2.38 4.56 4,5 1.5 53. 8.3.323 4 2 to 6 3, 9A812S41.18 2.16 3,4 1.2 42.4 48.193 34 9A812H41.13 1.56 2,9 1.3 36.4 35.3.142 29 12 6 to 13.8 9A812F41.11 1.32 2,6.92 32.5 28.4.114 26 2 to 7 4, 9A812M41.9 1.8 2,35.83 29.3 22.5.9 23 9A812L41 7 to 13.8.6.72 1,85.65 23. 14.7.59 2 9A824G41 12 to 26.4.21 5.4 4,5 1.5 53. 8.3.323 4 2 to 6 3, 9A824S41.1 2.4 3,4 1.2 42.4 48.193 34 9A824H41.7 1.68 2,9 1.3 36.4 35.3.142 29 24 12 to 27.6 9A824F41.6 1.44 2,6.92 32.5 28.4.114 26 2 to 7 4, 9A824M41.5 1.2 2,35.83 29.3 22.5.9 23 9A824L41 14 to 27.6.4.96 1,85.65 23. 14.7.59 2 Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Control Dimensions Unit : mm With ribs 8.5 71.5.3 4-4.3.3 Mounting Hole 4 25.5 4 8.5 71.5.3 Lead Wire AWG24 UL17 +5 3 1 Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 4-4.5 9 71.5.3 15

Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 DC Fan 8mm 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics.4.35.3.25.2.15.1.5 1 9 8 7 6 5 4 3 2 1 G speed 13.2V/26.4V 6V/.2.4.6.8 1. 1.2 1.4 1.6 1.8 inch H2O Pa.3.25.2.15.1.5 7 6 5 4 3 2 1 S speed.5 13.8V/27.6V 6V/ 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5 1. 1.5.2.15.1.5 5 4 3 2 1 H speed.5 13.8V/27.6V 6V/ 1. 1.5 9A812G41 9A824G41 9A812S41 9A824S41 9A812H41 9A824H41.16.14.12.1.8.6.4.2 4 3 2 1 F speed.5 13.8V/27.6V 6V/ 1. 1.5.12.1.8.6.4.2 3 2 1 M speed 13.8V/27.6V 6V/.5 1. 1 2 3 4 5 1 2 3 4 1 2 3 4.1.8.6.4.2 2 1 L speed 13.8V/27.6V 7V/14V.5 1. 9A812F41 9A824F41 9A812M41 9A824M41 9A812L41 9A824L41 16

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 32mm Mass 13g GA type High Air Flow Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 1.83 9.96 9,7 2.45 86.5 36 1.45 57 9GA812P2S1.8.96 2,8.71 25.1 3.12 24 1.2 to 13.8 2 to 7 1.59 7.8 8,7 2.2 77.7 294 1.18 54 9GA812P2H1 12.5.6 2,6.66 23.3 26.15 21 4, 1.35 4.2 6,7 1.69 59.6 171.68 47 9GA812P2M1 1.2 to 12.6 2 to 55.4.48 1,4.35 12.3 7.5.3 1 1.42 1.1 9,7 2.45 86.5 36 1.45 57 9GA824P2S1 24 2.4 to 27.6 2 to 7.5 1.2 2,8.71 25.1 3.12 24 PWM Available options: Without Sensor Pulse Sensor Dimensions Unit : mm (With ribs) 8.5 71.5.3 4-Ø4.5.3 Mounting Hole Lead Wire AWG26 UL143 +5 3 (1) Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 9 4-4.5 71.5.3 71.5.3 8.5 Rotating Direction (4) (4) 32.5 Air Flow Direction Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver 15.5 Outlet side 4.3.3 39.6 5 1 Model 19-49E 19-49H 15.5 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 11.2 11.2 17

Options Unit : mm Resin finger guards Model 19-12G 71.5.3 71.5.3 7.5 4-2.5 4-4.3.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 71.5.3 1.5.5 4-4.3.3 DC Fan 8mm Air Flow - Static Pressure Characteristics PWM Static Pressure Static Pressure 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 DC 4-1.5 4-2.5 2. 5.8 2 1.8 1.6 4.6 15 PWM 1.4 PWM 1% PWM 1% 1.2 3 1% 1..4 1.8 2 5% 5% 5%.6.2 5.4 1 % %.2 % 1 2 3 1 2 3 1 2 2 4 6 8 1 2 4 6 8 1 1 2 3 4 5 6 7 Air Flow 9GA812P2S1 9GA824P2S1 Operating Voltage Range PWM PWM 1 1 Static Pressure Static Pressure DC PWM PWM 1 1 13.8V 2. 5.8 2 1.8 13.8V/27.6V 1.6 4 12.6V.6 15 1.4 1.2 3 1..4 1.8 2 1.2V.6 1.2V.4 1.2 5 1.2V/2.4V.2 1 2 3 m /min 1 2 3 1 2 2 4 6 8 1 2 4 6 8 1 1 2 3 4 5 6 7 Air Flow Air Flow 9GA812P2S1 9GA824P2S1 9GA812P2H1 9GA812P2H1 Static Pressure Static Pressure 9GA812P2M1 9GA812P2M1 PWM Duty - Speed Characteristics Example 1, 9, 8, 7, 6, 5, 4, 3, 2, Voltage DC / DC 24V/ 24V DC 9,7min -1 2,8min -1 1, 1 9GA812P2S1 9GA824P2S1 1, 9, 8, 7, 6, 5, 4, 3, 2, Voltage DC DC 8,7min -1 2,6min -1 1, 1 9GA812P2H1 Voltage DC DC PWM 1, 9, 8, 7, 6, 5, 4, 6,7min -1 3, 2, 1,4min 1, -1 1 9GA812P2M1 18

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 32mm Mass 15g Specifications The following nos. have pulse sensors and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 19P812A21 6 to 13.2.56 6.72 4,6 1.52 53.7 91.1.366 45 2 to 55 4,(+55 ) 19P812H21 12.16 1.92 3,15 1.5 37.1 43.1.173 33 4, 1.2 to 13.8 2 to 7 19P812M21.7.84 2,.65 23. 18.6.75 21 6, 19P824A21 12 to 26.4.29 6.96 4,6 1.52 53.7 91.1.366 45 2 to 6 4, 19P824H21 24.9 2.16 3,15 1.5 37.1 43.1.173 33 2.4 to 27.6 19P824M21.4.96 2,.65 23. 18.6.75 21 2 to 7 6, 19P848H21 48 43 to 53.6 2. 3,35 1.1 38.9 5.9.24 35 4, Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor Low speed Sensor Dimensions Unit : mm With ribs 8.5 32.5 71.5.3 4-4.3.3 4 4 Mounting Hole 8.5 71.5.3 Lead Wire AWG24 UL17 +3 3 1 Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side Outlet side 71.5.3 4-4.5 71.5.3 4-4.5 84 89.5 78 71.5.3 78 71.5.3 19 78 78

Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 DC Fan 8mm 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics.5.4.3.2.1 12 1 8 6 4 2 A speed 13.2V/26.4V 6V/.5 1. 1.5 2..25.2.15.1.5 6 5 4 3 2 1 H speed.5 13.8V/27.6V 1.2V/2.4V 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5 6 7 1. 1.5.25.2.15.1.5 7 6 5 4 3 2 1 H speed.5 53V 48V 43V 1. 1.5 2. 19P812A21 19P824A21 19P812H21 19P824H21 19P848H21.12 3 M speed.1.8.6.4.2 2 1 13.8V/27.6V 1.2V/2.4V.5 1. 1 2 3 4 19P812M21 19P824M21 11

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type), 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black or blue Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 38mm Mass 23g HV type Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V cycle % A W min m³/min Pa inchh ² O db(a) h 9HV812P1G1 12 1.8 to 13.2 1 3.4 4.8 14,9 3.7 13.7 1, 4. 69 2 to 7.64 7.68 4,4 1.6 37.5 87.2.35 4 4,/6 9HV848P1G1 48 36 to 57 1.85 4.8 14,9 3.7 13.7 1, 4. 69 (7,/4 ) 1 to 7.13 6.24 4,4 1.6 37.5 87.2.35 4 Note: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Dimensions Unit : mm With ribs Options Unit : mm 4 4.5.3 Mounting Hole 38.5 (4) (4) Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 8.5 71.5.3 +5 3 (1) 15.5 39.6 71.5.3 8.5 Lead Wire AWG22 UL143 11.2 Rotating Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side 71.5.3 4 4.5 Air Flow Direction Outlet side 71.5.3 4 4.5 Model 19-49E 19-49H 15.5 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 83 71.5.3 9 71.5.3 11.2 111

Options Unit : mm Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 1.5.5 4-4.3.3 71.5.3 DC Fan 8mm 71.5.3 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics PWM 1,2 4.5 4. 1, 3.5 3. 2.5 2. 1.5 1..5 8 6 4 2 % DC PWM 1% 5% 1 2 3 2 4 6 8 1 12 14 9HV812P1G1 4 1,2 4.5 4. 1, 3.5 3. 2.5 2. 1.5 1..5 8 6 4 2 % DC 48V PWM 1% 5% 1 2 3 2 4 6 8 1 12 14 9HV848P1G1 4 Operating Voltage Range 1,2 4.5 4. 1, 3.5 8 3. 2.5 6 2. 1.5 4 1..5 2 PWM 1 1 13.2V 1.8V 1 2 3 2 4 6 8 1 12 14 9HV812P1G1 4 1,2 PWM PWM 1 1 4.5 57V 4. 1, 3.5 48V 8 3. 36V 2.5 6 2. 1.5 4 1. 2.5 1 2 3 4 2 4 6 8 1 12 14 9HV848P1G1 PWM Duty - Speed Characteristics Example Voltage DC DC 16, 14,9min -1 14, 12, 1, 8, 6, 4, 4,4min -1 2, 1 9HV812P1G1 16, 14, 12, 1, 8, 6, 4, 2, Voltage 48V DC48V DC 14,9min -1 4,4min -1 1 9HV848P1G1 112

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 38mm Mass 16g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA812P1G61 1 1.2 14.4 1,5 2.85 1.6 48 1.92 6.4.48 2,.51 18. 28.7.11 21 9GA812P1S61 12 1.8 to 13.2 1.94 11.28 9,55 2.6 91.8 48 1.93 59.1 1.2 2,9.74 26.1 6.24 27 9GA812P1H61 1.6 7.2 8,25 2.25 79.4 38 1.53 55 4,/6 2 to 7.8.96 2,5.64 22.6 45.18 24 (7,/4 ) 1.47 11.28 9,55 2.6 91.8 48 1.93 59 9GA824P1S61.6 1.44 2,9.74 26.1 6.24 27 24 2.4 to 27.6 1.3 7.2 8,25 2.25 79.4 38 1.53 55 9GA824P1H61.5 1.2 2,5.64 22.6 45.18 24 Note: Expected life at 4 ambient is just reference value. PWM Available options: Without Sensor Pulse Sensor Dimensions Unit : mm (With ribs) 4-4.5.3 Mounting Hole 8.5 71.5.3 +5 3 (1) 71.5.3 8.5 Lead Wire AWG26 UL143 (4) (4) 38.5 Rotating Direction Air Flow Direction 113

Reference dimension of mounting holes and vent opening Unit : mm 4-4.5 DC Fan 8mm 9 71.5.3 71.5.3 Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 71.5.3 7.5 4-2.5 4-4.3.3 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 4.3.3 5 1 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 114

DC Fan 8mm sq. San Ace 8 8 8 38mm Mass 16g Air Flow - Static Pressure Characteristics PWM DC 2.4 6 2.2 2. 5 PWM 1.8 1% 1.6 4 1.4 1.2 3 1..8 2.6 5%.4 1.2 % 1 2 3 2 4 6 8 1 9GA812P1G61 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % DC PWM 1% 5% 1 2 3 2 4 6 8 1 9GA812P1S61 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 % DC PWM 1% 5% 1 2 3 2 4 6 8 1 9GA812P1H61 Operating Voltage Range 2.4 6 PWM PWM 1 1 2.2 2. 1.8 5 13.2V 1.6 4 1.4 1.8V 1.2 1. 3.8 2.6.4 1.2 1 2 3 2 4 6 8 1 9GA812P1G61 2.4 6 2.2 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4 1.2 PWM PWM 1 1 1 13.2V 1.8V 2 2 4 6 8 9GA812P1S61 1 3 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6 1.4.2 PWM PWM 1 1 1 13.2V 1.8V 2 4 6 8 1 9GA812P1H61 2 3 PWM Duty - Speed Characteristics Example Voltage DC DC 11, 1, 1,5min -1 9, 8, 7, 6, 5, 4, 3, 2, 2,min -1 1, 1 9GA812P1G61 Voltage DC / DC24V / 24V DC 1, 9,55min -1 8, 6, 4, 2,9min -1 2, 1 9GA812P1S61 9GA824P1S61 Voltage DC / DC24V / 24V DC 1, 8, 6, 4, 2, 2,5min -1 8,25min -1 1 9GA812P1H61 9GA824P1H61 115

DC Fan 8mm 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % DC 24V PWM 1% 5% 1 2 3 2 4 6 8 1 9GA824P1S61 Static Pressure 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 % DC 24V PWM 1% 5% 1 2 3 2 4 6 8 1 9GA824P1H61 Static Pressure 2.4 6 2.2 2. 5 1.8 1.6 1.4 1.2 1..8.6.4.2 4 3 2 1 PWM 1 PWM 1 1 27.6V 24V 2.4V 2 4 6 8 1 Air Flow 9GA824P1S61 2 3 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4.2 1 PWM 1 PWM 1 1 27.6V 24V 2.4V 2 4 6 8 1 9GA824P1H61 2 3 116

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-1) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 38mm Mass 22g GV type Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V cycle % A W min m³/min Pa inchh ² O db(a) h 1 3.8 45.6 1,2 3.9 138. 49. 1.97 65 9GV812P1G3.32 3.84 3, 1.15 4.6 42.4.17 34 1.8 to 13.2 1 3. 36. 9,7 3.7 131. 44. 1.77 63 9GV812P1H3.2 2.4 2,9 1.11 39.2 39..16 34 12 1 1.5 18 8, 3.5 18. 31. 1.21 58 9GV812P1F3.12 1.44 2,4.92 32. 27.1.11 26 1.2 to 13.8 2 to 7 4, 1.75 9 6, 2.29 81. 169..68 51 9GV812P1M3.9 1.8 1,7.65 23. 13.6.5 19 9GV824P1G3 24 2.4 to 27.6 1 1.6 38.4 1,2 3.9 138. 49. 1.97 65.3 7.2 4,7 1.79 63.2 14..41 44 9GV848P1G3 48 4.8 to 55.2 1.84 4.32 1,2 3.9 138. 49. 1.97 65.15 7.2 4,7 1.79 63.2 14..41 44 Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Dimensions Unit : mm 4-4.3.3 Mounting Hole With ribs Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 4-4.5 8.5 71.5.3 Lead Wire AWG24 UL143 +3 3 9 71.5.3 1 71.5.3 8.5 4 38.5 4 Rotating Direction Air Flow Direction 117

DC Fan 8mm sq. San Ace 8 8 8 38mm Mass 22g Air Flow - Static Pressure Characteristics PWM 2.4 6 DC 2.4 6 DC 1.6 4 DC 2. 1.6 1.2.8.4 5 4 3 2 1 PWM 1% 5% % 2. 1.6 1.2.8.4 5 4 3 2 1 PWM 1% 5% % 1.2.8.4 3 2 1 PWM 1% 5% % 1 2 3 4 5 2 4 6 8 1 12 14 16 18 9GV812P1G3 1 2 3 4 5 2 4 6 8 1 12 14 16 18 9GV812P1H3 1 2 3 4 2 4 6 8 1 12 14 9GV812P1F3 Operating Voltage Range 2.4 6 PWM 1 1 2.4 6 PWM 1 1 1.6 4 PWM 1 1 2. 1.6 1.2.8.4 5 4 3 2 1 13.2V 1.8V 2. 1.6 1.2.8.4 5 4 3 2 1 13.2V 1.8V 1.2 3.8 2.4 1 13.8V 1.2V 1 2 3 4 5 2 4 6 8 1 12 14 16 18 9GV812P1G3 1 2 3 4 5 2 4 6 8 1 12 14 16 18 Air Flow 9GV812P1H3 1 2 3 4 2 4 6 8 1 12 14 9GV812P1F3 PWM Duty - Speed Characteristics Example Voltage DC DC 11, 1, 1,2min -1 9, 8, 7, 6, 5, 4, 3, 3,min -1 2, 1, 1 9GV812P1G3 Voltage DC DC 1, 9,7min -1 9, 8, 7, 6, 5, 4, 3, 2,9min -1 2, 1, 1 9GV812P1H3 Voltage DC DC 1, 9, 8, 8,min -1 7, 6, 5, 4, 3, 2, 2,4min -1 1, 1 9GV812P1F3 119

DC Fan 8mm 1. 25 DC 2.4 6 DC 24V 2.4 6 DC 48V.8.6.4.2 2 15 1 5 5% % 2. 5 2. 5 PWM PWM PWM 1% 1.6 4 1% 1.6 4 1% 1 2 3 1 2 3 4 5 1 2 3 4 5 2 4 6 8 1 25 5 75 1 125 15 175 2 4 6 8 11214 1618 Air Flow Air Flow 9GV812P1M3 Static Pressure 1.2.8.4 3 2 1 % 5% 9GV824P1G3 Static Pressure 1.2 3.8 2.4 1 5% % 9GV848P1G3 1. 25 PWM 1 PWM 1 PWM 1 PWM PWM 1 2.4 6 2.4 6.8.6.4.2 2 15 1 5 13.8V 1.2V Static Pressure 2. 1.6 1.2.8.4 5 4 3 2 1 27.6V 24V 2.4V Static Pressure 2. 5 1.6 4 1.2 3.8 2.4 1 55.2V 48V 4.8V 1 2 3 1 2 2 4 6 8 1 25 5 75 1 125 15 175 2 4 6 8 112141618 Air Flow Air Flow 9GV812P1M3 9GV824P1G3 3 4 5 1 2 9GV848P1G3 3 4 5 Voltage DC DC 7, 6, 6,min -1 5, 4, 3, 2, 1, 1,7min -1 1 9GV812P1M3 Voltage 24V DC24V DC 11, 1, 1,2min -1 9, 8, 7, 6, 5, 4,7min 4, -1 3, 2, 1, 1 9GV824P1G3 Voltage 48V DC48V DC 11, 1, 1,2min -1 9, 8, 7, 6, 5, 4,7min 4, -1 3, 2, 1, 1 9GV848P1G3 12

DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black Sensor yellow Storage Temperature 3 to 7 Non-condensing 8 8 38mm Mass 17g G type Specifications The following nos. have pulse sensors and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 9G812K11 1.8 to 13.2 1.8 21.6 7,8 3.1 17.3 31 1.285 58 2 to 6 9G812G11 12 1.1 13.2 6,3 2.55 9 211.847 51 7 to 13.8 9G812H11.9 1.8 5,7 2.28 8 171.687 49 9G824G11.56 13.4 6,3 2.55 9 211.847 51 24 2.4 to 27.6 2 to 7 9G824H11.42 1.1 5,7 2.28 8 171.687 49 9G848G11.27 13. 6,3 2.55 9 211.847 51 48 4.8 to 55.2 9G848H11.2 9.6 5,7 2.28 8 171.687 49 Available options: Without Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor PWM Control 4, Dimensions Unit : mm 8.5 71.5.3 4-4.3.3 Mounting Hole With ribs Lead Wire AWG24 UL17 +3 3 Reference dimension of mounting holes and vent opening Unit : mm 71.5.3 9 4-4.5 71.5.3 1 71.5.3 8.5 4 38.5 4 Rotating Direction Air Flow Direction 121

Options Unit : mm Finger guards Model 19-49C Surface treatment Nickel-chrome plating silver Outlet side 4.3.3 5 1 Resin finger guards Model 19-12G 71.5.3 7.5 4-2.5 4-4.3.3 DC Fan 8mm 15.5 39.6 71.5.3 Model 19-49E 19-49H 11.2 Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 5 1 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 71.5.3 1.5.5 4-4.3.3 15.5 71.5.3 11.2 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics 1.4 1.2 1..8.6.4.2 K speed 1.1 35 26.9 22 1. 24.8 2 3.9 22 13.2V.8 2.7 18 25 16.7 18 13.8V.6 13.8V 16 14.6 14.5 2 1.8V 12.5 12.4 1 15.4 1.3 8.3 8 1 7V 6 6.2 7V.2 4 4 5.1.1 2 2.5 1 1.5 2. 2.5 3. 3.5 m.5 1. 1.5 2. 2.5 3..5 1. 1.5 2. 2.5 3. 3 /min 2 4 6 8 1 12 2 4 6 8 1 12 2 4 6 8 1 9G812K11 G speed 9G812G11 H speed 9G812H11 1.1 1..9.8.7.6.5.4.3.2.1 26 24 22 2 18 16 14 12 1 8 6 4 2.5 G speed 1. 27.6V/55.2V 24V/48V 2.4V/4.8V 1.5 2. 2.5 3. 2 4 6 8 1 12 9G824G11 9G848G11.9.8.7.6.5.4.3.2.1 22 2 18 16 14 12 1 8 6 4 2 H speed 27.6V/55.2V 24V/48V 2.4V/4.8V.5 1. 1.5 2. 2.5 3. 2 4 6 8 1 9G824H11 9G848H11 122