Index P. 2 Tool Lineup and Guide for Icons P. 3 Total Solutions for Your Thread Milling Needs Solid Type P. 5 Tool Selection Guide by Work Materials P

Transcription

1 Thread Mill Vol.13

2 Index P. 2 Tool Lineup and Guide for Icons P. 3 Total Solutions for Your Thread Milling Needs Solid Type P. 5 Tool Selection Guide by Work Materials P. 6 Tool Selection Guide by Screw Size WH-VM-PNC P. 9 for Small Diameter WX-ST-PNC P. 10 for Steels WXO-ST-PNC P. 13 for Steels with Internal Coolant Supply WX-PNC P. 14 for Nonferrous Metal and Heat-Resistant Alloy OT-SFT-PNGT P. 17 for General Purpose, Solid Carbide Spiral-Fluted Type OT-PNGT P. 18 for General Purpose, Solid Carbide Type PNGT P. 20 for HSS DR-PNAC P. 22 Super-Planet Cutter for Multifunction Milling DR-O-PNAC P. 22 Super Planet Cutter for Multifunction Milling with Internal Coolant Supply Indexable Thread Mill (HY-PRO P) P. 23 Guide for Selecting HYPRO-P P. 25 Tool Selection Guide by Screw Size HY-PRO P P. 33 Multi-Point HY-PRO P P. 47 Single Point P. 51 Tips for Machining and Recommended Cutting Conditions P. 57 Machining Data P. 65 Features of Thread Mills and Hints for Usage P. 67 FAQ about Thread Milling Go to the following for the quick tool search! Search for suitable tools from specific materials P.5 Tool Selection Guide by Work Materials (p.5) Search for suitable tools from specific screw sizes P.6 Solid Type (p.6) P. 2 5 HY-PRO P (p.25)

3 Recommended Tools Solid types, by application Index WX-ST-PNC / WXO-ST-PNC for Steels WX-PNC for Nonferrous Metals and Heat-Resistant Alloy Suitable for carbon, stainless and hardened steels (up to 45HRC) With/without coolant hole Suitable for non-ferrous metals and heat-resistant alloys WH-VM-PNC for Small Diameter Suitable down to M1, 0.25 pitch small-diameter threads Suitable for carbon steels, stainless steels, castings and non-ferrous metals Indexable Thread Mill (HY-PRO P) Multi-Point Single Point For detailed information on indexable thread mills (HY-PRO Planet Cutters), see p. 24. Guide for Icons 1 Tool Materials 2 Helix Angle 3 Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank diameter 4 Surface Treatment 5 Page References 6 Thread Type Smooth coating WX WX Super coating Indicates page no. for recommended conditions. for Internal Thread WX TiAIN WX (TiAIN) coating FX TiAIN FX (composite multi-layered TiAIN) coating Indicates page no. for attachable holders. for External Thread TiN TiN coating TiCN TiCN coating Indicates page no. for attachable inserts. Planet Cutter is registered trademark of OSG Corporation.

4 3 Support Tools for Your Thread Milling Needs Reduce setup, machining time, and achieve stable tool life with these 3 support tools. 2 ThreadPro Thread Milling NC Code Generator Software 1 RPRG Reference value of tool radius offset Thread Milling 3 Diameter Correction Tool for Thread Mills Use RPRG to reduce the workload RPRG is the reference value of tool radius offset Conventionally, the tool radius was entered during setup as a parameter of the NC system, which was corrected by checking the thread with a gauge. However, it has become possible to reduce the checking and correction simply by entering the RPRG value indicated on the tool shank. ISO-5H Internal Thread ISO-6H Internal Thread Example Tool diameter:7.5; Pitch: 1; Minimum cutting bore diameter: M10 (: ) Internal thread size: M10 1 Tolerance for pitch diameter: 0 to (ISO-5H), 0 to (ISO-6H) Entered value of RPRG: Pitch Dia. Radius RPRG=3.681 Entered value of Radius: 3.75 Notes 1. RPRG are reference values. Optimal values for actual cutting depend on the machining environment. Determine optimal values after trial cutting. 2. RPRG values are optimally established to achieve ISO:5H (formerly Grade 1) internal thread limits for metric threads and ANSI:3B internal thread limits for unified threads. RPRG values established for taper pipes (R/Rc) are effective when using the thread milling NC code generator software ThreadPro available on our website. 3. For diameters of thread mills, RPRG values are calculated based on the minimum cutting bore diameter (the minimum cutting internal thread size of the tool diameter). To cut other diameters, it is necessary to use a smaller value than RPRG. 4. RPRG values are indicated on tools manufactured from November 2014.

5 Revamped Thread Milling NC Code Generator Software "ThreadPro" Generate codes for complex machining couldn't be easier. Create machining programs at ease with OSG's revamped NC code generator software ThreadPro. 3 Key Revamped Features Available in 12 different languages Supporting Tools Supports 8 NC programming languages Calculates the most appropriate RPRG value Powered by ThreadPro with Comprehensive Features 1) Generate programs for zero cut at ease 2) High quality machining by stair passes 3) Capability to review machining trajectory to reduce tool damage Pass type : continuous Pass type : stairs Achieve Stable Tool Life with the DCT for Accurate Diameter Measurement The internal thread effective diameter, which used to be difficult to determine, can now be measured with readable values. Please refer DCT catalogue for details. How can we properly determine the diameter correction value? When the effective diameter of the limit gauge is minus, the radius correction value of the thread mill cannot be determined. However, with the use of the thread mill Diameter Correction Tool (DCT), the effective diameter can be measured, which can eliminate the risk of hole expansion, allow appropriate adjustment and significantly reduce setup time. Is the internal thread effective diameter always the same after changing tool? Knowing the internal thread effective diameter value can help maintain the same effective diameter after exchanging tool. As long as the starting position is the same, the GO position (tool life) can be aligned to help predict and stabilize tool life.

6 Tool Selection Guide by Work Materials Best Good Solid Type Indexable Thread Mill Type M1 M1.8 for Small Dia. for Steels for Steels with Internal Coolant Supply M2 for Nonferrous Metal and Heat-Resistant Alloy Multi-Point Single-Point Product WH-VM-PNC WX-ST-PNC WXO-ST-PNC WX-PNC HY-PRO P HY-PRO P Page P.9 P.10 P.13 P.14 P.33 P.47 Low Carbon Steel Medium Carbon Steel High Carbon Steel Alloy Steel C0.25% C % C0.45% SCM 25 45HRC Hardened Steel Stainless Steel 45 55HRC 50 60HRC SUS Tool Steel SKD Cast Steel Cast Iron Ductile Cast Iron SC FC FCD Work Material Copper Brass Cu Bs Brass Casting Bronze Aluminum Rolled Aluminum Alloy Casting Magnesium Alloy Casting Zinc Alloy Casting Titanium Alloy Ni Nickel Alloy Thermo Setting Plastic Thermo Plastic BsC PB Al AC, ADC MC ZDC Ti-6Al-4V Inconel - - Machining program may need adjustment of cutting speed and depth.

7 Tool Selection Guide by Screw Size Metric screw thread (internal) Pitch Page P.9 P.10 P.13 P.14 P.17 P.18 P.20 Min. Cutting Bore Dia. WH-VM-PNC WX-ST-PNC WXO-ST-PNC WX-PNC OT-SFT-PNGT OT-PNGT PNGT for Small Dia. for Steels for Steels with Internal Coolant Supply for Nonferrous Metal Heat-Resistant Alloy for General Purpose Spiral-Fulted for General Purpose, Solid Carbide Type P0.25 M M P0.3 M P0.35 M M P0.4 M P0.45 M M P0.5 M M P0.7 M P0.75 M M P0.8 M M M M P1.0 M M M M M P1.25 M M M M M M P1.5 M M M M M P1.75 M M M M P2.0 M M M M P2.5 M M M M P3.0 M M M P3.5 M for HSS Tool Selection Guide by Screw Size Tool Selection Guide by Screw Size for Indexable Thread Mills (HY-PRO P)

8 Tool Selection Guide by Screw Size Unified screw thread (internal) T.P.I. Page P.9 P.11 P.15 Min. Cutting Bore Dia. WH-VM-PNC WX-ST-PNC WX-PNC 32 No Pipe screw thread T.P.I Page P.12 P.16 P.19 P.21 Range of Thread Size WX-ST-PNC WX-PNC OT-PNGT PNGT Tool Selection Guide by Screw Size for Indexable Thread Mills (HY-PRO P)

9 Pipe screw thread T.P.I RpPSGPF RpPS GPF Page P.12 P.16 P.19 P.21 Range of Thread Size WX-ST-PNC WX-PNC OT-PNGT PNGT Tool Selection Guide by Screw Size Pipe screw thread T.P.I ½ Page P.12 P.16 Range of Thread Size WX-ST-PNC WX-PNC Tool Selection Guide by Screw Size for Indexable Thread Mills (HY-PRO P)

10 for Small Diameter WH-VM-PNC S11.4 M11.8 M25 No.8 Dc1.3 or 1.5Dc P.51~P.52 No. Min. Cutting Bore Dia. Pitch Dc L Thread Per Cutting Part n Ds Flutes Unit:mm Stock Yen S , S B 9, S ,410 No. Min. Cutting Bore Dia. Pitch Dc L Thread Per Cutting Part n Ds Flutes Unit:mm Stock Yen M , M , M , M , M ,410 B M , M , M , M , M ,900 No. Min. Cutting Bore Dia. T.P.I. Dc L Thread Per Cutting Part n Ds Flutes Unit:mm Stock Yen No B 21,900 B=Standard stock item B=Standard stock item B=Standard stock item WH-VM-PNC (S, M, UUNJ) is only for milling internal threads. See p.2 for explanation of icons. osgjapan wh-vm

11 for Steels WX-ST-PNC Type 1 Type 2 No. Min. Cutting Bore Dia. Pitch P.53 Dc L n Ds Flutes Type Unit:mm Stock Yen ,900 M , , M , , ,900 M , , M , , , ,600 C M , , , , M , , M , ,500 M , , M , ,400 Solid Type WX-ST-PNC (M) is only for milling internal threads. See p.2 for explanation of icons. C=Standard stock item NEXT

12 for Steels WX-ST-PNC Type 1 Type 2 FROM No. Min. Cutting Bore Dia. T.P.I. P.53 Dc L n Ds Flutes Type Unit:mm Stock Yen , , , , , , , , C 33, , , , , , , , ,100 C=Standard stock item WX-ST-PNC (UUNJ) is only for milling internal threads. See p.2 for explanation of icons. NEXT

13 for Steels WX-ST-PNC Type 1 Type 2 FROM No. Range of Thread SizeDia. T.P.I. Dc P.53 L Type 3 Type 4 n Ds Flutes Type Unit:mm Stock Yen , , , C 41, , , ,200 Solid Type No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes C=Standard stock item Type Unit:mm Stock Yen , , , C 35, , , ,000 C=Standard stock item No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes Type Unit:mm Stock Yen , ,200 C , ½ ,200 See p.2 for explanation of icons. C=Standard stock item osgjapan wx-st

14 for Steels with Internal Coolant Supply WXO-ST-PNC Type 1 Type 2 No. Min. Cutting Bore Dia. Pitch P.53 Dc L n Ds Flutes Type Unit:mm Stock Yen ,600 M , , M , , ,800 M , , M , , , C 40, M , , , , M , , ,000 M , , M , ,800 WXO-ST-PNC (M) is only for milling internal threads. See p.2 for explanation of icons. C=Standard stock item osgjapan wx-st

15 for Nonferrous Metal and Heat-Resistant Alloy WX-PNC Type 1 Type 2 No. Min. Cutting Bore Dia. Pitch P.53 Dc L 12.8 n Ds Flutes Type Stock Yen ,100 M , , M , , ,600 M , , M , ,400 B , , M , , , , M , , M , ,900 M C 69, B 87, M ,700 C ,700 WX-PNC (M) is only for milling internal threads. See p.2 for explanation of icons. Unit:mm B, C=Standard stock item NEXT Solid Type osgjapan wx-pnc

16 for Nonferrous Metal and Heat-Resistant Alloy WX-PNC Type 1 Type 2 FROM No. Min. Cutting Bore Dia. T.P.I. P.53 Dc L n Ds Flutes Type Unit:mm Stock Yen , , , , , , , , C 32, , , , , , , , ,600 C=Standard stock item WX-PNC (UUNJ) is only for milling internal threads. See p.2 for explanation of icons. NEXT

17 for Nonferrous Metal and Heat-Resistant Alloy WX-PNC Type 1 Type 2 FROM No. Range of Thread SizeDia. T.P.I. Dc P.53 L Type 3 Type 4 n Ds Flutes Type Unit:mm Stock Yen , , ,000 B , , , C 95,300 Solid Type B, C=Standard stock item No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes Type Unit:mm Stock Yen , , , C 34, , , ,400 C=Standard stock item No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes Type Unit:mm Stock Yen ,000 B , ,800 C ½ ,300 See p.2 for explanation of icons. B, C=Standard stock item

18 for General Purpose, Solid Carbide Spiral-Fulted Type OT-SFT-PNGT Type 1 Type 2 P.54 No. Min. Cutting Bore Dia. Pitch Dc L n Ds Flutes Type Unit:mm Stock Yen M , ,100 M , M , ,900 M , , M ,600 B , ,300 M , ,000 M , , M , ,000 B=Standard stock item OT-SFT-PNGT (M) is only for milling internal threads. See p.2 for explanation of icons.

19 for General Purpose, Solid Carbide Type OT-PNGT Type 1 Type 2 No. Min. Cutting Bore Dia. Pitch P.54 Dc L n Ds Flutes OT-PNGT (M) is only for milling internal threads. See p.2 for explanation of icons. Type Unit:mm Stock Yen M , ,900 M , M , ,000 M , , M ,500 B , ,400 M , ,000 M , , M , ,000 B=Standard stock item NEXT Solid Type

20 for General Purpose, Solid Carbide Type OT-PNGT Type 2 Type 3 FROM No. Range of Thread SizeDia. T.P.I. Dc P.54 L n Ds Flutes Type Unit:mm Stock Yen , , ,300 B , , ,000 B=Standard stock item No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes Type Unit:mm Stock Yen , , ,900 B , , ,000 B=Standard stock item See p.2 for explanation of icons.

21 for HSS PNGT Type 1 Type 3 No. Min. Cutting Bore Dia. Pitch P.54 Dc L n Ds Flutes Type Unit:mm Stock Yen ,900 M , , M , , , , M , , , ,000 B , M , , , , ,300 M , , , M , ,200 Solid Type PNGT (M) is only for milling internal threads. See p.2 for explanation of icons. B=Standard stock item NEXT

22 for HSS PNGT Type 1 Type 2 Type 3 Type 4 FROM No. Range of Thread SizeDia. T.P.I. Dc P.54 L n Ds Flutes Type Unit:mm Stock Yen , , B 52, , ,000 B=Standard stock item No. Range of Thread SizeDia. T.P.I. Dc L n Ds Flutes Type Unit:mm Stock Yen , , B 44, , ,100 B=Standard stock item See p.2 for explanation of icons. No. Range of Thread SizeDia. T.P.I. P.54 Dc L n Ds Flutes Type Unit:mm Stock Yen , , B 44, , ,100 B=Standard stock item PNGT (G (PF)) is only for milling internal threads. See p.2 for explanation of icons.

23 Super-Planet Cutter for Multifunction Milling DR-PNAC No. Mill Dia Dc L L2 P.55 n LS L3 d1 ds d2 Ds Flutes Unit:mm Stock Yen M 6 1-2D , M D , M 8 1-2D , M D , M D C 74, M D , M D , M D , M D ,200 Solid Type C=Standard stock item Tapping lengththread dia.2 See p.2 for explanation of icons. Super-Planet Cutter for Multifunction Milling with Internal Coolant Supply DR-O-PNAC No. Mill Dia Dc L L2 P.55 n LS L3 d1 ds d2 Ds Flutes Unit:mm Stock Yen M 6 1-2D , M D ,500 C M D , M D ,000 B=Standard stock item DR-O-PNAC has oil hole. Tapping lengththread dia.2 See p.2 for explanation of icons.

24 How to choose HYPRO-P (Indexable Thread Mill) HY-PRO Planet Cutter is capable of mounting inserts on a single holder even with differences in thread type Q. Q. Which thread cutting tool is suitable for this specific thread size? Q. Q. Is this insert mountable on this body? Q. Q. What is the first thing to consider when selecting a tool? Please refer the following hints for selecting tools to suit your specific needs. Example: I want to cut M56 x 3.5 threads with a tapping length of 82 mm. How should I choose the tools? STEP 1 Pitch P3.5 Identify the appropriate pitch and thread size on the selection chart (p. 25 to 32). Multi-Point Single Point Thread Size Tool Holder Insert Tool Holder Insert M 30 M 37 TMC / SO TM 028/008 M 30 TM2SC 18C U 86 2U 2UDC60 TM TM3SC 20C U 2UDC60 TM M 36 TM4SC 25C U 2UDC60 TM M 41 TMC / SO TM2 M 42 TM3SC 28C U 3UDE60 TM M 46 TMC25-5TMLC SO TM2 M 48 TM4SC D U 3UDE60 TM M 53 TMC32-5TMLC32-5TMNC SO TM2 M 54 TM5SC D U 3UDE60 TM M 58 TM2C SO TM2 M 62 TM6SC D U 3UDE60 TM STEP 2 In the identified items, look for holders that can be used for cutting 82 mm of tapping length. Appropriate tool = Tapping length + (Pitch x 1.5) < is... Multi-Point Single-Point Example : M563.5, tapping length = 82mm 82mm mm 3.5mm1.5P These are recommended values to ensure effective tapping length. Please make adjustment depending on the cutting condition. Consequently, look for holders that are at least mm in neck length / maximum milling length. Multi-Point Single-Point Shell Type Type n TMC / TMC TMC TMLC TMLC TMNC Type L1 TM2SC 18C U 86 TM3SC 20C U 105 TM4SC 25C U 115 TM3SC 28C U 144 Appropriate tool differ depends on arbor to be mounted. Please consider tools with arbor.

25 ThreadPro follows these steps automatically. Revamped Thread Milling NC Code Generator Software Data entry screen Enter information via dropdown list! Indexable Thread Mill Search results Tool selection done in a split second! Powered by for detail for FAQ Example: What type of tool should I choose? Choose a tool that suits your work environment and purpose. Multi-Point Many variations Suitable for pipe threads can be cut A single piece of insert has multiple crests to cut the corresponding number of threads. For both internal and external threads Single-Point (Cylindrical Shank) Suitable for large diameter threads, such as eyebolts. One type of insert can cut different pitches Three corners per insert Multiple inserts achieves high-efficiency cutting Adjustable overhang length for specific cutting conditions

26 Tool Selection Guide by Screw Size Metric screw thread (internal) Pitch P0.5 P0.75 P1 P1.25 P1.5 Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert M 13 TMC12-2TMC SO TM2 M 17 TMC / SO TM2 TMNC SO TM2 M 19 TM2C SO TM2 TMC SO TM2 M 21 TMNC SO TM2 M 22 TMC SO TM2 M 24 TMLC SO TM2 M 28 TM2C SO TM2 M 51 TMSH-D50-FMA SO TM2 M 14 TMC12-2TMC SO TM2 M 18 TMC /001TMNC SO TM2 M 19 TM2C SO TM2 TMC SO TM2 M 22 TMNC SO TM2 M 23 TMC SO TM2 M 25 TMLC SO TM2 M 29 TM2C SO TM2 M 52 TMSH-D50-FMA SO TM2 M 15 TMC12-2TMC SO TM2 M 19 TMC / SO TM2 TMNC SO TM2 M 20 TM2C SO TM2 TMC SO TM2 M 22 TMNC SO TM2 M 23 TMC SO TM2 M 25 TMLC SO TM2 M 28 TMC / SO TM2 M 29 TM2C SO TM2 M 33 TMC25-5TMLC SO TM2 M 41 TMC32-5TMLC32-5TMNC SO TM2 M 46 TM2C SO TM2 M 53 TMSH-D50-FMA SO TM2 M 66 TMSH-D63-FMA SO TM2 M 83 TMSH-D80-FMA SO TM2 M 103 TMSH-D100-FMA SO TM2 M 128 TMSH-D125-FMA SO TM2 M 16 TMC12-2TMC SO TM2 M 20 TMC / SO TM2 TMNC SO TM2 M 21 TM2C SO TM2 TMC SO TM2 M 23 TMNC SO TM2 M 24 TMC SO TM2 M 26 TMLC SO TM2 M 29 TMC / SO TM2 M 30 TM2C SO TM2 M 35 TMC25-5TMLC SO TM2 M 42 TMC32-5TMLC32-5TMNC SO TM2 M 48 TM2C SO TM2 M 55 TMSH-D50-FMA SO TM2 M 68 TMSH-D63-FMA SO TM2 M 85 TMSH-D80-FMA SO TM2 M 105 TMSH-D100-FMA SO TM2 M 130 TMSH-D125-FMA SO TM2 M 16 TMC12-2TMC SO TM2 M 20 TMC / SO TM2 TMNC SO TM2 M 22 TM2C SO TM2 TMC SO TM2 Blue characteres are special order items. NEXT

27 FROM Pitch P1.5 P1.75 P2 Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert M 24 TMNC SO TM2 M 25 TMC SO TM2 M 26 TM2SC 18C U 2UDB60 TM M 27 TMLC SO TM2 M 28 TM3SC 20C U 2UDB60 TM M 30 TMC / SO TM2 M 31 TM2C SO TM2 M 33 TM4SC 25C U 2UDB60 TM M 35 TMC25-5TMLC SO TM2 M 39 TM3SC 28C U 3UDB60 TM M 40 TMC32-6B 6B1.5 SO TM2 M 43 TMC32-5TMLC32-5TMNC SO TM2 M 45 TM4SC D U 3UDB60 TM M 48 TM2C SO TM2 M 51 TMC40-6B 6B1.5 SO TM2 M 52 TM5SC D U 3UDB60 TM M 56 TMSH-D50-FMA SO TM2 M 59 TMLC42-6B 6B1.5 SO TM2 M 60 TM6SC D U 3UDB60 TM M 69 TMSH-D63-FMA SO TM2 M 86 TMSH-D80-FMA25.4-6B 6B1.5 SO TM2 TMSH-D80-FMA SO TM2 M 106 TMSH-D100-FMA SO TM2 M 131 TMSH-D125-FMA SO TM2 M 21 TMC /001TMNC SO TM2 M 23 TMC SO TM2 M 25 TMNC SO TM2 M 26 TMC SO TM2 M 28 TMLC SO TM2 M 31 TMC / SO TM2 M 32 TM2C SO TM2 M 36 TMC25-5TMLC SO TM2 M 44 TMC32-5TMLC32-5 TMNC SO TM2 M 49 TM2C SO TM2 M 57 TMSH-D50-FMA SO TM2 M 70 TMSH-D63-FMA SO TM2 M 87 TMSH-D80-FMA SO TM2 M 107 TMSH-D100-FMA SO TM2 M 132 TMSH-D125-FMA SO TM2 M 14 M 21 TMC12-2TMC SO TM 028/004 M 22 TMC /001TMNC SO TM2 M 23 TMC SO TM2 M 25 TMNC SO TM2 M 26 TMC SO TM2 TM2SC 18C U 2UDB60 TM M 28 TMLC SO TM2 M 29 TM3SC 20C U 2UDB60 TM M 32 TMC / SO TM2 M 33 TM2C SO TM2 M 34 TM4SC 25C U 2UDB60 TM M 37 TMC25-5TMLC SO TM2 M 39 TM3SC 28C U 3UDB60 TM M 42 TMC32-6B 6B2.0 SO TM2 M 44 TMC32-5TMLC32-5TMNC SO TM2 M 45 TM4SC D U 3UDB60 TM M 50 TM2C SO TM2 M 52 TM5SC D U 3UDB60 TM M 53 TMC40-6B 6B2.0 SO TM2 M 57 TMSH-D50-FMA SO TM2 M 60 TMLC42-6B 6B2.0 SO TM2 TM6SC D U 3UDB60 TM M 70 TMSH-D63-FMA SO TM2 Blue characteres are special order items. NEXT Indexable Thread Mill

28 Tool Selection Guide by Screw Size FROM Pitch Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert TMSH-D80-FMA25.4-6B 6B2.0 SO TM2 M 87 TMSH-D80-FMA SO TM2 P2 M 107 TMSH-D100-FMA SO TM2 M 132 TMSH-D125-FMA SO TM2 M 20 M 21 TMC / SO TM 028/005 M 22 M 34 TMC / SO TM 028/006 M 27 TM2SC 18C U 2UDC60 TM M 30 TM3SC 20C U 2UDC60 TM M 34 TMC / SO TM2 TM4SC 25C U 2UDC60 TM M 40 TMC25-5TMLC SO TM2 TM3SC 28C U 3UDE60 TM P2.5 M 46 TM4SC D U 3UDE60 TM M 47 TMC32-5TMLC32-5TMNC SO TM2 M 52 TM2C SO TM2 TM5SC D U 3UDE60 TM M 60 TM6SC D U 3UDE60 TM M 73 TMSH-D63-FMA SO TM2 M 90 TMSH-D80-FMA SO TM2 M 110 TMSH-D100-FMA SO TM2 M 135 TMSH-D125-FMA SO TM2 M 24 M 35 TMC / SO TM 028/007 M 27 TM2SC 18C U 2UDC60 TM M 30 TM3SC 20C U 2UDC60 TM M 35 TM4SC 25C U 2UDC60 TM M 36 M 42 TMC25-5TMLC SO TM 028/009 M 37 TMC / SO TM2 M 41 TM3SC 28C U 3UDE60 TM M 42 TMC25-5TMLC SO TM2 M 47 TMC32-6B 6B3.0 SO TM2 P3 M 48 TM4SC D U 3UDE60 TM M 50 TMC32-5TMLC32-5TMNC SO TM2 M 52 TM5SC D U 3UDE60 TM M 55 TM2C SO TM2 M 58 TMC40-6BTMLC42-6B 6B3.0 SO TM2 M 60 TM6SC D U 3UDE60 TM M 75 TMSH-D63-FMA SO TM2 M 92 TMSH-D80-FMA25.4-6B 6B3.0 SO TM2 TMSH-D80-FMA SO TM2 M 112 TMSH-D100-FMA SO TM2 M 137 TMSH-D125-FMA SO TM2 M 30 M 37 TMC / SO TM 028/008 M 30 TM2SC 18C U 2UDC60 TM TM3SC 20C U 2UDC60 TM M 36 TM4SC 25C U 2UDC60 TM M 41 TMC / SO TM2 M 42 TM3SC 28C U 3UDE60 TM M 46 TMC25-5TMLC SO TM2 P3.5 M 48 TM4SC D U 3UDE60 TM M 53 TMC32-5TMLC32-5TMNC SO TM2 M 54 TM5SC D U 3UDE60 TM M 58 TM2C SO TM2 M 62 TM6SC D U 3UDE60 TM M 77 TMSH-D63-FMA SO TM2 M 94 TMSH-D80-FMA SO TM2 M 114 TMSH-D100-FMA SO TM2 M 139 TMSH-D125-FMA SO TM2 M 36 M 42 TMC25-5TMLC SO TM 028/010 TM2SC 18C U 2UDC60 TM P4 M 36 TM3SC 20C U 2UDC60 TM TM4SC 25C U 2UDC60 TM M 42 TM3SC 28C U 3UDH60 TM M 44 TMC / SO TM2 Blue characteres are special order items. NEXT

29 FROM Pitch P4 P4.5 P5 P5.5 P6 Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert M 48 TMC25-5TMLC SO TM2 TM4SC D U 3UDH60 TM M 54 TMC32-6B 6B4.0 SO TM2 M 55 TM5SC D U 3UDH60 TM M 56 TMC32-5TMLC32-5TMNC SO TM2 M 60 TMC40-6B 6B4.0 SO TM2 M 62 TM2C SO TM2 M 64 TM6SC D U 3UDH60 TM M 68 TMLC42-6B 6B4.0 SO TM2 M 78 TMSH-D63-FMA SO TM2 M 95 TMSH-D80-FMA25.4-6B 6B4.0 SO TM2 TMSH-D80-FMA SO TM2 M 115 TMSH-D100-FMA SO TM2 M 140 TMSH-D125-FMA SO TM2 M 42 M 52 TMC25-5TMLC SO TM 028/011 M 42 TM3SC 28C U 3UDH60 TM M 48 TMC / SO TM2 TM4SC D U 3UDH60 TM M 53 TMC25-5TMLC SO TM2 M 54 TM5SC D U 3UDH60 TM M 58 TMC32-6B 6B4.5 SO TM2 M 60 TMC32-5TMLC32-5TMNC SO TM2 TMC40-6B 6B4.5 SO TM2 M 62 TM6SC D U 3UDH60 TM M 66 TM2C SO TM2 M 70 TMLC42-6B 6B4.5 SO TM2 M 80 TMSH-D63-FMA SO TM2 M 97 TMSH-D80-FMA25.4-6B 6B4.5 SO TM2 TMSH-D80-FMA SO TM2 M 117 TMSH-D100-FMA SO TM2 M 142 TMSH-D125-FMA SO TM2 M 48 TMC32-6B 6B5.0 SO TM2 TM3SC 28C U 3UDH60 TM TM4SC D U 3UDH60 TM M 54 TM5SC D U 3UDH60 TM M 58 TMC40-6B 6B5.0 SO TM2 M 62 TM6SC D U 3UDH60 TM M 72 TMLC42-6B 6B5.0 SO TM2 M 99 TMSH-D80-FMA25.4-6B 6B5.0 SO TM2 TM3SC 28C U 3UDH60 TM M 56 TMC32-6B 6B5.5 SO TM2 TM4SC D U 3UDH60 TM TM5SC D U 3UDH60 TM M 60 TMC40-6B 6B5.5 SO TM2 M 63 TM6SC D U 3UDH60 TM M 74 TMLC42-6B 6B5.5 SO TM2 M 101 TMSH-D80-FMA25.4-6B 6B5.5 SO TM2 TM3SC 28C U 3UDH60 TM M 64 TMC32-6BTMC40-6B 6B6.0 SO TM2 TM4SC D U 3UDH60 TM TM5SC D U 3UDH60 TM TM6SC D U 3UDH60 TM M 76 TMLC42-6B 6B6.0 SO TM2 M 103 TMSH-D80-FMA25.4-6B 6B6.0 SO TM2 Blue characteres are special order items. Indexable Thread Mill (Note) To machine external screwthreads, tool must be selected as below : holder outer dia. 1.5 internal screwthread outer dia. (nominal dia.)

30 Tool Selection Guide by Screw Size Unified screw thread (internal) T.P.I Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert 1 2 TMC12-2TMC UN TM2 3 4 TM2C UN TM TMC12-2TMC UN TM TMC /001 TMNC UN TM2 3 4 TM2C UN TM2 TMC UN TM2 7 8 TMNC20-3TMC UN TM2 1 TMLC UN TM TM2C UN TM TMC12-2TMC UN TM2 3 4 TMC16-3TMC /001 TMNC UN TM TM2C UN TM2 TMC UN TM2 7 8 TMNC UN TM TMC UN TM2 1 TMLC UN TM TM2C UN TM TMC12-2TMC UN TM2 3 4 TMC /001 TMNC UN TM TM2C UN TM2 TMC UN TM2 7 8 TMNC UN TM TMC UN TM2 1 TMLC UN TM TMC / UN TM TM2C UN TM TMC25-5TMLC UN TM TMC32-5TMLC32-5 TMNC UN TM TM2C UN TM2 5 8 TMC12-2TMC UN TM TMC /001 TMNC UN TM2 7 8 TM2C UN TM2 TMC UN TM TMNC UN TM2 1 TMC UN TM TMLC UN TM TM2C UN TM2 TMC / UN TM TMC25-5TMLC UN TM TMC32-5TMLC32-5 TMNC UN TM TM2C UN TM TMC12-2TMC UN TM TMC / UN TM2 TMNC UN TM2 7 8 TM2C UN TM2 TMC UN TM TMNC UN TM2 1 TMC UN TM TMLC UN TM TMC / UN TM TM2C UN TM TMC25-5TMLC UN TM TMC32-5TMLC32-5 TMNC UN TM TM2C UN TM2 Blue characteres are special order items. NEXT

31 FROM T.P.I Thread Size Multi-Point Blue characteres are special order items. Single Point Tool Holder Insert Tool Holder Insert TMC12-2TMC UN TM TMC /001 TMNC UN TM2 7 8 TM2C UN TM2 TMC UN TM TMNC UN TM2 1 TMC UN TM2 TM2SC 18C U 2UDB60 TM TMLC UN TM TM3SC 20C U 2UDB60 TM TMC / UN TM TM2C UN TM TM4SC 25C U 2UDB60 TM TMC25-5TMLC UN TM TM3SC 28C U 3UDB60 TM TMC32-5TMLC32-5 TMNC UN TM TM4SC D U 3UDB60 TM TM2C UN TM2 2 TM5SC D U 3UDB60 TM TM6SC D U 3UDB60 TM TMC12-2TMC UN TM2 7 8 TMC /001 TMNC UN TM TM2C UN TM2 TMC UN TM2 1 TMNC20-3TMC UN TM2 TM2SC 18C U 2UDB60 TM TMLC UN TM2 TM3SC 20C U 2UDB60 TM TM2C UN TM2 TMC / UN TM TM4SC 25C U 2UDB60 TM TMC25-5TMLC UN TM TM3SC 28C U 3UDB60 TM TMC32-5TMLC32-5 TMNC UN TM2 TM4SC D U 3UDB60 TM TM2C UN TM2 2 TM5SC D U 3UDB60 TM TM6SC D U 3UDB60 TM 7 8 TMC /001 TMNC UN TM TMC UN TM2 1 TMNC UN TM TMC UN TM TMLC UN TM TMC / UN TM TM2C UN TM TMC25-5TMLC UN TM TMC32-5TMLC32-5 TMNC UN TM2 2 TM2C UN TM2 7 8 TMC /001 TMNC UN TM TMC UN TM2 1 TMNC UN TM TMC UN TM2 TM2SC 18C U 2UDB60 TM TMLC UN TM2 NEXT Indexable Thread Mill

32 Tool Selection Guide by Screw Size FROM T.P.I. Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert TM3SC 20C U 2UDB60 TM TMC / UN TM TM2C UN TM TM4SC 25C U 2UDB60 TM TMC25-5TMLC UN TM TM3SC 28C U 3UDB60 TM TMC32-5TMLC32-5 TMNC UN TM TM4SC D U 3UDB60 TM 2 TM2C UN TM2 TM5SC D U 3UDB60 TM TM6SC D U 3UDB60 TM 7 8 TMC /001 TMNC UN TM TMC UN TM TMNC20-3TMC UN TM TMLC UN TM TMC / UN TM TM2C UN TM TMC25-5TMLC UN TM TMC32-5TMLC32-5 TMNC UN TM2 2 TM2C UN TM TMC / UN TM TMC25-5TMLC UN TM2 11 TMC32-5TMLC TMNC UN TM2 2 TM2C UN TM TM2SC 18C U 2UDC60 TM TM3SC 20C U 2UDC60 TM TMC / UN TM TM4SC 25C U 2UDC60 TM TMC25-5TMLC UN TM TM3SC 28C U 3UDE60 TM TMC32-5TMLC32-5 TMNC UN TM2 TM4SC D U 3UDE60 TM TM2C UN TM TM5SC D U 3UDE60 TM TM6SC D U 3UDE60 TM TMC / UN TM TMC25-5TMLC UN TM2 9 TMC32-5TMLC TMNC UN TM TM2C UN TM TM2SC 18C U 2UDC60 TM TM3SC 20C U 2UDC60 TM TMC / UN TM TM4SC 25C U 2UDC60 TM TM3SC 28C U 3UDE60 TM TMC25-5TMLC UN TM TM4SC D U 3UDE60 TM 2 TMC32-5TMLC32-5 TMNC UN TM TM5SC D U 3UDE60 TM TM2C UN TM TM6SC D U 3UDE60 TM Blue characteres are special order items. NEXT

33 FROM T.P.I. Thread Size Multi-Point Single Point Tool Holder Insert Tool Holder Insert TMC / UN TM TMC25-5TMLC UN TM2 7 TMC32-5TMLC TMNC UN TM TM2C UN TM TM2SC 18C U 2UDC60 TM TM3SC 20C U 2UDC60 TM TM4SC 25C U 2UDC60 TM TMC / UN TM2 TM3SC 28C U 3UDH60 TM TM4SC D U 3UDH60 TM 2 TMC25-5TMLC UN TM TM5SC D U 3UDH60 TM TMC32-6B 6B6 UN TM TMC32-5TMLC32-5 TMNC UN TM TM2C UN TM TMC40-6B 6B6 UN TM TM6SC D U 3UDH60 TM TMLC42-6B 6B6 UN TM TM3SC 28C U 3UDH60 TM TMC32-6B 6B5 UN TM TM4SC D U 3UDH60 TM TM5SC D U 3UDH60 TM TMC40-6B 6B5 UN TM TM6SC D U 3UDH60 TM TMLC42-6B 6B5 UN TM2 2 TMC32-6B 6B4.5 UN TM2 TM3SC 28C U 3UDH60 TM TM4SC D U 3UDH60 TM TMLC42-6B 6B4.5 UN TM2 TM5SC D U 3UDH60 TM TMC40-6B 6B4.5 UN TM TMLC42-6B 6B4.5 UN TM TM6SC D U 3UDH60 TM TMLC42-6B 6B4 UN TM2 TMC32-6BTMC40-6B 6B4 UN TM2 TM3SC 28C U 3UDH60 TM 4 TM4SC D U 3UDH60 TM TM5SC D U 3UDH60 TM TM6SC D U 3UDH60 TM Blue characteres are special order items. Indexable Thread Mill

34 Description (Straight Shank Holder, Multi-Point) TMNC20-3LH Shape Type Oil hole Shank Size Insert Size Type Thread Milling Non L 2 N 1 Standard, 1 Insert 1 Long Neck, 1 Insert 2 with 2 Inserts 1 for Taper Pipe Threads Internal Coolant C All sizes are with oil hole 1242 Shank Sizes: 12 to 42 Insert Size No B Insert Size 1 4" 3 8" 1 2" 5 8" 3 4"B Inscribed Circle 6.35 mm 10 mm 12.7 mm mm mm Non 124/*** RighHand LH Left Hand HY-PRO P Multi-Point HY-PRO P PNTC P.56 P.38~P.46 TMC Holder (1 insertstandard type Unit:mm Type Insert Size No. L n Ds D D Stock Yen TMC , TMC , TMC20-2LH 30, TMC / , TMC , TMC ,400 C TMC / , TMC / , TMC , TMC25-5LH 38, TMC , TMC32-6B ,600 6B TMC40-6B C=Standard stock item Sizes marked with are special order items. For cautions of using LH Holder : please refer to p.36 To use in combination with a insert, please refer to the Tool Selection Guide by Screw Sizeon p.25 or utilize our NC code generator softwarethreadproto automatically select the best option available. See p.2 for explanation of icons. NEXT

35 HY-PRO P PNTC Indexable Thread Mill FROM P.56 P.38~P.46 TMLC1TMLC Holder (1 insertlong type Unit:mm No. Type Insert Size No. L n Ds D D Stock Yen TMLC , TMLC ,300 5 C TMLC , TMLC42-6B 6B ,600 C=Standard stock item To use in combination with a insert, please refer to the Tool Selection Guide by Screw Sizeon p.25 or utilize our NC code generator softwarethreadproto automatically select the best option available. See p.2 for explanation of icons. NEXT Precautions for using normal holder The normal holder is right-handed. The normal holder can be used to mill both right and left-handed threads. (Note) To machine external screwthreads, tool must be selected as below : holder outer dia. 1.5 internal screwthread outer dia. (nominal dia.)

36 HY-PRO P Multi-Point HY-PRO P PNTC FROM P.56 P.38~P.46 TM2C Holder ( 2 inserts, high efficiency type Unit:mm Type Insert Size No. L n Ds D D Stock Yen TM2C , TM2C C 56, TM2C ,000 C=Standard stock item P.56 P.38~P.46 TMNC Holder ( 1 insertfor taper pipe threads Unit:mm Type Insert Size No. L n Ds s D D Stock Yen TMNC , TMNC16-3LH ,500 3 C TMNC , TMNC20-3LH ,400 TMNC TMNC32-5LH C=Standard stock item Sizes marked with are special order items. For cautions of using LH Holder : please refer to p.36 To use in combination with a insert, please refer to the Tool Selection Guide by Screw Sizeon p.25 or utilize our NC code generator softwarethreadproto automatically select the best option available. See p.2 for explanation of icons.

37 Parts Insert Size No. Tool Holder Type Screw Thread Size Two faces of pipe inserts can be used, one marked with (or without) the letter R, and another with the letter L. To use a pipe insert with a face marked with (or without) the letter R, use a holder that does not have the code LH at the end of its designation. To use a pipe insert with a face marked with letter L, use a holder that has the code LH at the end of its designation. Because an insert is sloped, both faces of an insert cannot be used on the same holder. Overall Length Wrench SN2TM M T8-D 3 TMLC25-3 TM2C SN3T No.5-40UNC 9.5 Type T10-D SN3TM No.5-40UNC SN4TM No.8-32UNC T20-D TMC / SA5TM M T25-D SN5TM M B SM7T M T30-T Overall Length includes screw head. Precautions for selecting holders for pipe inserts: Careful with the direction of cutting edges. Indexable Thread Mill Precautions for using LH holder The LH holder is left-handed. To mill threads, operate the main shaft in reverse. The LH holder can be used to mill both right and left-handed threads. Precautions for using normal holder The normal holder is right-handed. The normal holder can be used to mill both right and left-handed threads. LH Holder Normal Holder (Note) To machine external screwthreads, tool must be selected as below : holder outer dia. 1.5 internal screwthread outer dia. (nominal dia.)

38 Description (Shell Type Holder, Multi-Point) TMSH-D100-FMA Thread Milling Shell Type D D D2 D D2 sizes: 50 to 125 FMA FMA type face mill arbor d1 Insert Size Insert Size No B Insert Size 3 8" 5 8" ¾"B Inscribed Circle 10 mm mm mm HY-PRO P Multi-Point HY-PRO P PNTC Type 1 Type 2 P.56 P.38~P.46 Shell Type Parts Unit:mm D b d d l l t Description Insert Size No. D d H No. of Flutes Type Clamping Bolt Stock Yen TMSH-D50-FMA M12 157, TMSH-D63-FMA , M TMSH-D80-FMA ,000 C TMSH-D80-FMA25.4-6B 6B M12 172, TMSH-D100-FMA MBA-M16 185, TMSH-D125-FMA MBA-M20 201,000 C=Standard stock item Please use with FMA type face mill arbor To use in combination with a insert, please refer to the Tool Selection Guide by Screw Sizeon p.25 or utilize our NC code generator softwarethreadproto automatically select the best option available. See p.2 for explanation of icons. Insert Size No. No. Type Screw Thread Size Overall Length No. Screw Driver SN3TM No.5-40UNC T10-D SN5TM M T25-D 6B SM7T M T30-T Overall Length includes screw head. Type

39 Description (Insert, Multi-Point) SO TM 2 Insert Size No B Insert Size Insert Size ¼" 3 8" ½" 5 8" ¾"B d Inscribed Circle 6.35 mm 10 mm 12.7 mm mm mm Applications Internal thread E External thread E for both applications or Pitch or T.P.I. SO BSPT NPTF W UN Thread Type Metric screw threads British taper pipe thread National taper pipe thread for dry sealing Parallel pipe threads Unified screw threads Thread Milling 028/*** 2 Insert 1 for 1 piece insert type (applying to corse pitch thread) 12 for both 1 and 2 pieces insert type HY-PRO P Multi-Point HY-PRO P PC-CTI Type 1 Type 2 Indexable Thread Mill P.33~P.37 Inserts for Metric screw thread (internal) Tool Material Surface Treatment General Application Application Aluminum Alloy Aluminum Alloy Casting VBX TiCN Unit:mm Description Insert Size No. Pitch Le No. of threads Type No. VBX Material Stock Yen SO TM , SO TM C 7, SO TM , SO TM SO TM , SO TM 028/ C 6, SO TM , SO TM SO TM C 7, SO TM SO TM C 7, SO TM SO TM ,820 C SO TM 028/ ,820 See p. 40 for precaution for use. C=Standard stock item NEXT

40 HY-PRO P Multi-Point HY-PRO P PC-CTI Type 1 Type 2 FROM P.33~P.37 Inserts for Metric screw thread (internal) Unit:mm Description Insert Size No. Pitch Le No. of threads Type No. VBX Material Stock Yen SO TM 028/ SO TM 028/ C 11, SO TM SO TM SO TM C 15, SO TM SO TM C 15, SO TM SO TM C 15, SO TM 028/ SO TM , SO TM 028/ , SO TM ,000 C SO TM 028/ , SO TM , SO TM 028/ ,000 See p. 40 for precaution for use. C=Standard stock item NEXT