INTRODUCTION RW1097 is a dot matrix LCD driver & controller LSI which is fabricated by low power CMOS technology. It can display 1line/2line/3line/4line/5line/6lines x 12 (16 x 16 dot format) with the CGROM, maximum 8192 16 x 16 fonts can be included (customized codes are available), and 72 (16x16 dot format) character can be self-created in CGRAM. Multiple-language supported. (Chinese, Japanese, Korean) FEATURES Driver Output Circuits - 192 segment outputs / 97 common outputs - 192 segment outputs / 81 common outputs - 192 segment outputs / 65 common outputs - 192 segment outputs / 49 common outputs - 192 segment outputs / 33 common outputs - 192 segment outputs / 17 common outputs Internal Memory Microprocessor Interface - 8-bit/4-bit parallel bi-directional interface with 6800 series. - 3/4-line serial peripheral interface available (only support write operation) - IIC serial interface (only support write operation) - Character Generator ROM (CGROM): 2M bits (8192 character x 16 x 16 dots ) - Alphabetic Generator ROM (HCGROM):16K bits (128 character x 16 x 8 dots ) - Character Generator RAM (CGRAM): 18K bits (72 characters x 16 x 16 dots ) - ICON RAMS (SEGRAM): 12 x 16 bits (192 icons max.) - Display Data RAM (DDRAM): 72 x 16 bits (72 characters max.) On-chip Low Power Analog Circuit - Logic power supply voltage range: 1.7 V to 3.6 V (-) - Boost power supply voltage range: 2.4 V to 3.6 V (2-) - Boost maximum voltage limited: 18.0 V (-) - Liquid crystal drive power supply range: 3.3 V to 17.0 V (V0 ) - Generation of intermediate LCD bias voltages - Internal Voltage converter (X2,X3,X4,X5,X6,X7) - Generation of LCD Supply voltage (external,v0,v1~v4 voltage supply is possible) - Inductor type regulator circuit converter built-in - On-chip electronic contrast control function (128 steps) - Automatic power on reset - Adjustment frame frequency is available highest possible frame frequency is 200Hz - Wide range of operating temperatures: -40 C to +85 C degree Multi Language supported - Chinese BIG5 Traditional Font - Chinese GB Simplified Font - Japanese JIS Font - Japanese SJIS Font - Korean KSC Font 1
Product RW1097-0A-001 RW1097-0B-002 RW1097-0C-003 Font-Type Chinese GB Simplified Character Japanese JIS Japanese SJIS 2
Pad Arrangement (COG) Chip Size: 6357 um 2447 um Gold Bump Pitch: PAD No. Pitch 1~144 40 um (I/O) 145~193 30 um (com/seg) 194~385 30 um (com/seg) 386~434 30 um (com/seg) Gold Bump Size: PAD No. 1 ~ 144: 20 (x) um 78 (y) um PAD No. 145 ~ 434: 15(x) um 124(y) um Gold Bump Height: 15 um (Typ) Chip Thickness: 500 um 3
BLOCK DIAGRAM 4
PAD LOCATION ( 1/97 Duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 5
PAD LOCATION ( 1/97 Duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[31] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[30] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[29] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[28] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[27] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[26] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[25] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[24] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[23] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[22] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[21] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[20] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[19] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[18] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[17] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[16] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 COM[47] -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 COM[46] -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 COM[45] -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 COM[44] -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 COM[43] -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 COM[42] -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 COM[41] -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 COM[40] -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 COM[39] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[38] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[37] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[36] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[35] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[34] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[33] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[32] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 6
PAD LOCATION ( 1/97 Duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 7
PAD LOCATION ( 1/97 Duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[63] 3064-246 362 SEG[168] 2175-1109 402 COM[64] 3064-216 363 SEG[169] 2205-1109 403 COM[65] 3064-186 364 SEG[170] 2235-1109 404 COM[66] 3064-156 365 SEG[171] 2265-1109 405 COM[67] 3064-126 366 SEG[172] 2295-1109 406 COM[68] 3064-96 367 SEG[173] 2325-1109 407 COM[69] 3064-66 368 SEG[174] 2355-1109 408 COM[70] 3064-36 369 SEG[175] 2385-1109 409 COM[71] 3064-6 370 SEG[176] 2415-1109 410 COM[72] 3064 24 371 SEG[177] 2445-1109 411 COM[73] 3064 54 372 SEG[178] 2475-1109 412 COM[74] 3064 84 373 SEG[179] 2505-1109 413 COM[75] 3064 114 374 SEG[180] 2535-1109 414 COM[76] 3064 144 375 SEG[181] 2565-1109 415 COM[77] 3064 174 376 SEG[182] 2595-1109 416 COM[78] 3064 204 377 SEG[183] 2625-1109 417 COM[79] 3064 234 378 SEG[184] 2655-1109 418 COM[80] 3064 264 379 SEG[185] 2685-1109 419 COM[81] 3064 294 380 SEG[186] 2715-1109 420 COM[82] 3064 324 381 SEG[187] 2745-1109 421 COM[83] 3064 354 382 SEG[188] 2775-1109 422 COM[84] 3064 384 383 SEG[189] 2805-1109 423 COM[85] 3064 414 384 SEG[190] 2835-1109 424 COM[86] 3064 444 385 SEG[191] 2865-1109 425 COM[87] 3064 474 386 COM[48] 3064-696 426 COM[88] 3064 504 387 COM[49] 3064-666 427 COM[89] 3064 534 388 COM[50] 3064-636 428 COM[90] 3064 564 389 COM[51] 3064-606 429 COM[91] 3064 594 390 COM[52] 3064-576 430 COM[92] 3064 624 391 COM[53] 3064-546 431 COM[93] 3064 654 392 COM[54] 3064-516 432 COM[94] 3064 684 393 COM[55] 3064-486 433 COM[95] 3064 714 394 COM[56] 3064-456 434 COMS2 3064 744 395 COM[57] 3064-426 396 COM[58] 3064-396 397 COM[59] 3064-366 398 COM[60] 3064-336 399 COM[61] 3064-306 400 COM[62] 3064-276 PAD No. PAD Name X Unit: (um) Y 8
PAD LOCATION ( 1/97 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 9
PAD LOCATION ( 1/97 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[64] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[65] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[66] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[67] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[68] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[69] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[70] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[71] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[72] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[73] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[74] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[75] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[76] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[77] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[78] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[79] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[80] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[81] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[82] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[83] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[84] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[85] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[86] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[87] -3064-426 224 SEG[30] -1965-1109 145 COM[48] -3064 744 185 COM[88] -3064-456 225 SEG[31] -1935-1109 146 COM[49] -3064 714 186 COM[89] -3064-486 226 SEG[32] -1905-1109 147 COM[50] -3064 684 187 COM[90] -3064-516 227 SEG[33] -1875-1109 148 COM[51] -3064 654 188 COM[91] -3064-546 228 SEG[34] -1845-1109 149 COM[52] -3064 624 189 COM[92] -3064-576 229 SEG[35] -1815-1109 150 COM[53] -3064 594 190 COM[93] -3064-606 230 SEG[36] -1785-1109 151 COM[54] -3064 564 191 COM[94] -3064-636 231 SEG[37] -1755-1109 152 COM[55] -3064 534 192 COM[95] -3064-666 232 SEG[38] -1725-1109 153 COM[56] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[57] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[58] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[59] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[60] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[61] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[62] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[63] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 10
PAD LOCATION ( 1/97 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 11
PAD LOCATION ( 1/97 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[32] 3064-246 362 SEG[168] 2175-1109 402 COM[31] 3064-216 363 SEG[169] 2205-1109 403 COM[30] 3064-186 364 SEG[170] 2235-1109 404 COM[29] 3064-156 365 SEG[171] 2265-1109 405 COM[28] 3064-126 366 SEG[172] 2295-1109 406 COM[27] 3064-96 367 SEG[173] 2325-1109 407 COM[26] 3064-66 368 SEG[174] 2355-1109 408 COM[25] 3064-36 369 SEG[175] 2385-1109 409 COM[24] 3064-6 370 SEG[176] 2415-1109 410 COM[23] 3064 24 371 SEG[177] 2445-1109 411 COM[22] 3064 54 372 SEG[178] 2475-1109 412 COM[21] 3064 84 373 SEG[179] 2505-1109 413 COM[20] 3064 114 374 SEG[180] 2535-1109 414 COM[19] 3064 144 375 SEG[181] 2565-1109 415 COM[18] 3064 174 376 SEG[182] 2595-1109 416 COM[17] 3064 204 377 SEG[183] 2625-1109 417 COM[16] 3064 234 378 SEG[184] 2655-1109 418 COM[15] 3064 264 379 SEG[185] 2685-1109 419 COM[14] 3064 294 380 SEG[186] 2715-1109 420 COM[13] 3064 324 381 SEG[187] 2745-1109 421 COM[12] 3064 354 382 SEG[188] 2775-1109 422 COM[11] 3064 384 383 SEG[189] 2805-1109 423 COM[10] 3064 414 384 SEG[190] 2835-1109 424 COM[9] 3064 444 385 SEG[191] 2865-1109 425 COM[8] 3064 474 386 COM[47] 3064-696 426 COM[7] 3064 504 387 COM[46] 3064-666 427 COM[6] 3064 534 388 COM[45] 3064-636 428 COM[5] 3064 564 389 COM[44] 3064-606 429 COM[4] 3064 594 390 COM[43] 3064-576 430 COM[3] 3064 624 391 COM[42] 3064-546 431 COM[2] 3064 654 392 COM[41] 3064-516 432 COM[1] 3064 684 393 COM[40] 3064-486 433 COM[0] 3064 714 394 COM[39] 3064-456 434 COMS2 3064 744 395 COM[38] 3064-426 396 COM[37] 3064-396 397 COM[36] 3064-366 398 COM[35] 3064-336 399 COM[34] 3064-306 400 COM[33] 3064-276 PAD No. PAD Name X Unit: (um) Y 12
PAD LOCATION ( 1/81 duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 13
PAD LOCATION ( 1/81 duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[31] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[30] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[29] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[28] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[27] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[26] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[25] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[24] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[23] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[22] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[21] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[20] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[19] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[18] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[17] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[16] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 NC] -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 COM[39] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[38] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[37] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[36] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[35] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[34] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[33] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[32] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 14
PAD LOCATION ( 1/81 duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 15
PAD LOCATION ( 1/81 duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[55] 3064-246 362 SEG[168] 2175-1109 402 COM[56] 3064-216 363 SEG[169] 2205-1109 403 COM[57] 3064-186 364 SEG[170] 2235-1109 404 COM[58] 3064-156 365 SEG[171] 2265-1109 405 COM[59] 3064-126 366 SEG[172] 2295-1109 406 COM[60] 3064-96 367 SEG[173] 2325-1109 407 COM[61] 3064-66 368 SEG[174] 2355-1109 408 COM[62] 3064-36 369 SEG[175] 2385-1109 409 COM[63] 3064-6 370 SEG[176] 2415-1109 410 COM[64] 3064 24 371 SEG[177] 2445-1109 411 COM[65] 3064 54 372 SEG[178] 2475-1109 412 COM[66] 3064 84 373 SEG[179] 2505-1109 413 COM[67] 3064 114 374 SEG[180] 2535-1109 414 COM[68] 3064 144 375 SEG[181] 2565-1109 415 COM[69] 3064 174 376 SEG[182] 2595-1109 416 COM[70] 3064 204 377 SEG[183] 2625-1109 417 COM[71] 3064 234 378 SEG[184] 2655-1109 418 COM[72] 3064 264 379 SEG[185] 2685-1109 419 COM[73] 3064 294 380 SEG[186] 2715-1109 420 COM[74] 3064 324 381 SEG[187] 2745-1109 421 COM[75] 3064 354 382 SEG[188] 2775-1109 422 COM[76] 3064 384 383 SEG[189] 2805-1109 423 COM[77] 3064 414 384 SEG[190] 2835-1109 424 COM[78] 3064 444 385 SEG[191] 2865-1109 425 COM[79] 3064 474 386 COM[40] 3064-696 426 NC 3064 504 387 COM[41] 3064-666 427 NC 3064 534 388 COM[42] 3064-636 428 NC 3064 564 389 COM[43] 3064-606 429 NC 3064 594 390 COM[44] 3064-576 430 NC 3064 624 391 COM[45] 3064-546 431 NC 3064 654 392 COM[46] 3064-516 432 NC 3064 684 393 COM[47] 3064-486 433 NC 3064 714 394 COM[48] 3064-456 434 COMS2 3064 744 395 COM[49] 3064-426 396 COM[50] 3064-396 397 COM[51] 3064-366 398 COM[52] 3064-336 399 COM[53] 3064-306 400 COM[54] 3064-276 PAD No. PAD Name X Unit: (um) Y 16
PAD LOCATION ( 1/81 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 17
PAD LOCATION ( 1/81 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[48] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[49] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[50] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[51] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[52] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[53] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[54] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[55] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[56] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[57] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[58] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[59] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[60] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[61] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[62] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[63] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[64] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[65] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[66] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[67] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[68] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[69] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[70] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[71] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[72] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[73] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[74] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[75] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[76] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[77] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[78] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[79] -3064-666 232 SEG[38] -1725-1109 153 COM[40] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[41] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[42] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[43] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[44] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[45] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[46] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[47] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 18
PAD LOCATION ( 1/81 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 19
PAD LOCATION ( 1/81 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[24] 3064-246 362 SEG[168] 2175-1109 402 COM[23] 3064-216 363 SEG[169] 2205-1109 403 COM[22] 3064-186 364 SEG[170] 2235-1109 404 COM[21] 3064-156 365 SEG[171] 2265-1109 405 COM[20] 3064-126 366 SEG[172] 2295-1109 406 COM[19] 3064-96 367 SEG[173] 2325-1109 407 COM[18] 3064-66 368 SEG[174] 2355-1109 408 COM[17] 3064-36 369 SEG[175] 2385-1109 409 COM[16] 3064-6 370 SEG[176] 2415-1109 410 COM[15] 3064 24 371 SEG[177] 2445-1109 411 COM[14] 3064 54 372 SEG[178] 2475-1109 412 COM[13] 3064 84 373 SEG[179] 2505-1109 413 COM[12] 3064 114 374 SEG[180] 2535-1109 414 COM[11] 3064 144 375 SEG[181] 2565-1109 415 COM[10] 3064 174 376 SEG[182] 2595-1109 416 COM[9] 3064 204 377 SEG[183] 2625-1109 417 COM[8] 3064 234 378 SEG[184] 2655-1109 418 COM[7] 3064 264 379 SEG[185] 2685-1109 419 COM[6] 3064 294 380 SEG[186] 2715-1109 420 COM[5] 3064 324 381 SEG[187] 2745-1109 421 COM[4] 3064 354 382 SEG[188] 2775-1109 422 COM[3] 3064 384 383 SEG[189] 2805-1109 423 COM[2] 3064 414 384 SEG[190] 2835-1109 424 COM[1] 3064 444 385 SEG[191] 2865-1109 425 COM[0] 3064 474 386 COM[39] 3064-696 426 NC 3064 504 387 COM[38] 3064-666 427 NC 3064 534 388 COM[37] 3064-636 428 NC 3064 564 389 COM[36] 3064-606 429 NC 3064 594 390 COM[35] 3064-576 430 NC 3064 624 391 COM[34] 3064-546 431 NC 3064 654 392 COM[33] 3064-516 432 NC 3064 684 393 COM[32] 3064-486 433 NC 3064 714 394 COM[31] 3064-456 434 COMS2 3064 744 395 COM[30] 3064-426 396 COM[29] 3064-396 397 COM[28] 3064-366 398 COM[27] 3064-336 399 COM[26] 3064-306 400 COM[25] 3064-276 PAD No. PAD Name X Unit: (um) Y 20
PAD LOCATION ( 1/65 duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 21
PAD LOCATION ( 1/65 duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[31] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[30] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[29] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[28] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[27] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[26] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[25] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[24] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[23] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[22] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[21] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[20] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[19] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[18] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[17] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[16] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 22
PAD LOCATION ( 1/65 duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 23
PAD LOCATION ( 1/65 duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[47] 3064-246 362 SEG[168] 2175-1109 402 COM[48] 3064-216 363 SEG[169] 2205-1109 403 COM[49] 3064-186 364 SEG[170] 2235-1109 404 COM[50] 3064-156 365 SEG[171] 2265-1109 405 COM[51] 3064-126 366 SEG[172] 2295-1109 406 COM[52] 3064-96 367 SEG[173] 2325-1109 407 COM[53] 3064-66 368 SEG[174] 2355-1109 408 COM[54] 3064-36 369 SEG[175] 2385-1109 409 COM[55] 3064-6 370 SEG[176] 2415-1109 410 COM[56] 3064 24 371 SEG[177] 2445-1109 411 COM[57] 3064 54 372 SEG[178] 2475-1109 412 COM[58] 3064 84 373 SEG[179] 2505-1109 413 COM[59] 3064 114 374 SEG[180] 2535-1109 414 COM[60] 3064 144 375 SEG[181] 2565-1109 415 COM[61] 3064 174 376 SEG[182] 2595-1109 416 COM[62] 3064 204 377 SEG[183] 2625-1109 417 COM[63] 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[32] 3064-696 426 NC 3064 504 387 COM[33] 3064-666 427 NC 3064 534 388 COM[34] 3064-636 428 NC 3064 564 389 COM[35] 3064-606 429 NC 3064 594 390 COM[36] 3064-576 430 NC 3064 624 391 COM[37] 3064-546 431 NC 3064 654 392 COM[38] 3064-516 432 NC 3064 684 393 COM[39] 3064-486 433 NC 3064 714 394 COM[40] 3064-456 434 COMS2 3064 744 395 COM[41] 3064-426 396 COM[42] 3064-396 397 COM[43] 3064-366 398 COM[44] 3064-336 399 COM[45] 3064-306 400 COM[46] 3064-276 PAD No. PAD Name X Unit: (um) Y 24
PAD LOCATION ( 1/65 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 25
PAD LOCATION ( 1/65 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[32] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[33] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[34] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[35] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[36] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[37] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[38] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[39] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[40] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[41] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[42] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[43] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[44] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[45] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[46] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[47] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[48] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[49] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[50] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[51] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[52] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[53] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[54] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[55] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[56] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[57] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[58] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[59] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[60] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[61] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[62] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[63] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 26
PAD LOCATION ( 1/65 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 27
PAD LOCATION ( 1/65 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[16] 3064-246 362 SEG[168] 2175-1109 402 COM[15] 3064-216 363 SEG[169] 2205-1109 403 COM[14] 3064-186 364 SEG[170] 2235-1109 404 COM[13] 3064-156 365 SEG[171] 2265-1109 405 COM[12] 3064-126 366 SEG[172] 2295-1109 406 COM[11] 3064-96 367 SEG[173] 2325-1109 407 COM[10] 3064-66 368 SEG[174] 2355-1109 408 COM[9] 3064-36 369 SEG[175] 2385-1109 409 COM[8] 3064-6 370 SEG[176] 2415-1109 410 COM[7] 3064 24 371 SEG[177] 2445-1109 411 COM[6] 3064 54 372 SEG[178] 2475-1109 412 COM[5] 3064 84 373 SEG[179] 2505-1109 413 COM[4] 3064 114 374 SEG[180] 2535-1109 414 COM[3] 3064 144 375 SEG[181] 2565-1109 415 COM[2] 3064 174 376 SEG[182] 2595-1109 416 COM[1] 3064 204 377 SEG[183] 2625-1109 417 COM[0] 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[31] 3064-696 426 NC 3064 504 387 COM[30] 3064-666 427 NC 3064 534 388 COM[29] 3064-636 428 NC 3064 564 389 COM[28] 3064-606 429 NC 3064 594 390 COM[27] 3064-576 430 NC 3064 624 391 COM[26] 3064-546 431 NC 3064 654 392 COM[25] 3064-516 432 NC 3064 684 393 COM[24] 3064-486 433 NC 3064 714 394 COM[23] 3064-456 434 COMS2 3064 744 395 COM[22] 3064-426 396 COM[21] 3064-396 397 COM[20] 3064-366 398 COM[19] 3064-336 399 COM[18] 3064-306 400 COM[17] 3064-276 PAD No. PAD Name X Unit: (um) Y 28
PAD LOCATION ( 1/49 duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 29
PAD LOCATION ( 1/49 duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[31] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[30] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[29] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[28] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[27] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[26] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[25] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[24] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[23] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[22] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[21] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[20] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[19] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[18] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[17] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[16] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 COM[47] -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 COM[46] -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 COM[45] -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 COM[44] -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 COM[43] -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 COM[42] -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 COM[41] -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 COM[40] -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 COM[39] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[38] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[37] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[36] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[35] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[34] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[33] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[32] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 30
PAD LOCATION ( 1/49 duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 31
PAD LOCATION ( 1/49 duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[15] 3064-246 362 SEG[168] 2175-1109 402 COM[16] 3064-216 363 SEG[169] 2205-1109 403 COM[17] 3064-186 364 SEG[170] 2235-1109 404 COM[18] 3064-156 365 SEG[171] 2265-1109 405 COM[19] 3064-126 366 SEG[172] 2295-1109 406 COM[20] 3064-96 367 SEG[173] 2325-1109 407 COM[21] 3064-66 368 SEG[174] 2355-1109 408 COM[22] 3064-36 369 SEG[175] 2385-1109 409 COM[23] 3064-6 370 SEG[176] 2415-1109 410 COM[24] 3064 24 371 SEG[177] 2445-1109 411 COM[25] 3064 54 372 SEG[178] 2475-1109 412 COM[26] 3064 84 373 SEG[179] 2505-1109 413 COM[27] 3064 114 374 SEG[180] 2535-1109 414 COM[28] 3064 144 375 SEG[181] 2565-1109 415 COM[29] 3064 174 376 SEG[182] 2595-1109 416 COM[30] 3064 204 377 SEG[183] 2625-1109 417 COM[31] 3064 234 378 SEG[184] 2655-1109 418 COM[32] 3064 264 379 SEG[185] 2685-1109 419 COM[33] 3064 294 380 SEG[186] 2715-1109 420 COM[34] 3064 324 381 SEG[187] 2745-1109 421 COM[35] 3064 354 382 SEG[188] 2775-1109 422 COM[36] 3064 384 383 SEG[189] 2805-1109 423 COM[37] 3064 414 384 SEG[190] 2835-1109 424 COM[38] 3064 444 385 SEG[191] 2865-1109 425 COM[39] 3064 474 386 COM[0] 3064-696 426 COM[40] 3064 504 387 COM[1] 3064-666 427 COM[41] 3064 534 388 COM[2] 3064-636 428 COM[42] 3064 564 389 COM[3] 3064-606 429 COM[43] 3064 594 390 COM[4] 3064-576 430 COM[44] 3064 624 391 COM[5] 3064-546 431 COM[45] 3064 654 392 COM[6] 3064-516 432 COM[46] 3064 684 393 COM[7] 3064-486 433 COM[47] 3064 714 394 COM[8] 3064-456 434 COMS2 3064 744 395 COM[9] 3064-426 396 COM[10] 3064-396 397 COM[11] 3064-366 398 COM[12] 3064-336 399 COM[13] 3064-306 400 COM[14] 3064-276 PAD No. PAD Name X Unit: (um) Y 32
PAD LOCATION ( 1/49 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 33
PAD LOCATION ( 1/49 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[16] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[17] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[18] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[19] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[20] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[21] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[22] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[23] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[24] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[25] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[26] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[27] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[28] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[29] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[30] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[31] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[32] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[33] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[34] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[35] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[36] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[37] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[38] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[39] -3064-426 224 SEG[30] -1965-1109 145 COM[0] -3064 744 185 COM[40] -3064-456 225 SEG[31] -1935-1109 146 COM[1] -3064 714 186 COM[41] -3064-486 226 SEG[32] -1905-1109 147 COM[2] -3064 684 187 COM[42] -3064-516 227 SEG[33] -1875-1109 148 COM[3] -3064 654 188 COM[43] -3064-546 228 SEG[34] -1845-1109 149 COM[4] -3064 624 189 COM[44] -3064-576 229 SEG[35] -1815-1109 150 COM[5] -3064 594 190 COM[45] -3064-606 230 SEG[36] -1785-1109 151 COM[6] -3064 564 191 COM[46] -3064-636 231 SEG[37] -1755-1109 152 COM[7] -3064 534 192 COM[47] -3064-666 232 SEG[38] -1725-1109 153 COM[8] -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 COM[9] -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 COM[10] -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 COM[11] -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 COM[12] -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 COM[13] -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 COM[14] -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 COM[15] -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 34
PAD LOCATION ( 1/49 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 35
PAD LOCATION ( 1/49 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[32] 3064-246 362 SEG[168] 2175-1109 402 COM[31] 3064-216 363 SEG[169] 2205-1109 403 COM[30] 3064-186 364 SEG[170] 2235-1109 404 COM[29] 3064-156 365 SEG[171] 2265-1109 405 COM[28] 3064-126 366 SEG[172] 2295-1109 406 COM[27] 3064-96 367 SEG[173] 2325-1109 407 COM[26] 3064-66 368 SEG[174] 2355-1109 408 COM[25] 3064-36 369 SEG[175] 2385-1109 409 COM[24] 3064-6 370 SEG[176] 2415-1109 410 COM[23] 3064 24 371 SEG[177] 2445-1109 411 COM[22] 3064 54 372 SEG[178] 2475-1109 412 COM[21] 3064 84 373 SEG[179] 2505-1109 413 COM[20] 3064 114 374 SEG[180] 2535-1109 414 COM[19] 3064 144 375 SEG[181] 2565-1109 415 COM[18] 3064 174 376 SEG[182] 2595-1109 416 COM[17] 3064 204 377 SEG[183] 2625-1109 417 COM[16] 3064 234 378 SEG[184] 2655-1109 418 COM[15] 3064 264 379 SEG[185] 2685-1109 419 COM[14] 3064 294 380 SEG[186] 2715-1109 420 COM[13] 3064 324 381 SEG[187] 2745-1109 421 COM[12] 3064 354 382 SEG[188] 2775-1109 422 COM[11] 3064 384 383 SEG[189] 2805-1109 423 COM[10] 3064 414 384 SEG[190] 2835-1109 424 COM[9] 3064 444 385 SEG[191] 2865-1109 425 COM[8] 3064 474 386 COM[47] 3064-696 426 COM[7] 3064 504 387 COM[46] 3064-666 427 COM[6] 3064 534 388 COM[45] 3064-636 428 COM[5] 3064 564 389 COM[44] 3064-606 429 COM[4] 3064 594 390 COM[43] 3064-576 430 COM[3] 3064 624 391 COM[42] 3064-546 431 COM[2] 3064 654 392 COM[41] 3064-516 432 COM[1] 3064 684 393 COM[40] 3064-486 433 COM[0] 3064 714 394 COM[39] 3064-456 434 COMS2 3064 744 395 COM[38] 3064-426 396 COM[37] 3064-396 397 COM[36] 3064-366 398 COM[35] 3064-336 399 COM[34] 3064-306 400 COM[33] 3064-276 PAD No. PAD Name X Unit: (um) Y 36
PAD LOCATION ( 1/33 duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 37
PAD LOCATION ( 1/33 duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[31] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[30] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[29] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[28] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[27] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[26] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[25] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[24] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[23] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[22] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[21] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[20] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[19] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[18] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[17] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[16] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 38
PAD LOCATION ( 1/33 duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 39
PAD LOCATION ( 1/33 duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[15] 3064-246 362 SEG[168] 2175-1109 402 COM[16] 3064-216 363 SEG[169] 2205-1109 403 COM[17] 3064-186 364 SEG[170] 2235-1109 404 COM[18] 3064-156 365 SEG[171] 2265-1109 405 COM[19] 3064-126 366 SEG[172] 2295-1109 406 COM[20] 3064-96 367 SEG[173] 2325-1109 407 COM[21] 3064-66 368 SEG[174] 2355-1109 408 COM[22] 3064-36 369 SEG[175] 2385-1109 409 COM[23] 3064-6 370 SEG[176] 2415-1109 410 COM[24] 3064 24 371 SEG[177] 2445-1109 411 COM[25] 3064 54 372 SEG[178] 2475-1109 412 COM[26] 3064 84 373 SEG[179] 2505-1109 413 COM[27] 3064 114 374 SEG[180] 2535-1109 414 COM[28] 3064 144 375 SEG[181] 2565-1109 415 COM[29] 3064 174 376 SEG[182] 2595-1109 416 COM[30] 3064 204 377 SEG[183] 2625-1109 417 COM[31] 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[0] 3064-696 426 NC 3064 504 387 COM[1] 3064-666 427 NC 3064 534 388 COM[2] 3064-636 428 NC 3064 564 389 COM[3] 3064-606 429 NC 3064 594 390 COM[4] 3064-576 430 NC 3064 624 391 COM[5] 3064-546 431 NC 3064 654 392 COM[6] 3064-516 432 NC 3064 684 393 COM[7] 3064-486 433 NC 3064 714 394 COM[8] 3064-456 434 COMS2 3064 744 395 COM[9] 3064-426 396 COM[10] 3064-396 397 COM[11] 3064-366 398 COM[12] 3064-336 399 COM[13] 3064-306 400 COM[14] 3064-276 PAD No. PAD Name X Unit: (um) Y 40
PAD LOCATION ( 1/33 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 41
PAD LOCATION ( 1/33 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 COM[0] -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 COM[1] -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 COM[2] -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 COM[3] -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 COM[4] -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 COM[5] -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 COM[6] -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 COM[7] -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 COM[8] -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 COM[9] -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 COM[10] -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 COM[11] -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 COM[12] -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 COM[13] -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 COM[14] -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 COM[15] -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[16] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[17] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[18] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[19] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[20] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[21] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[22] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[23] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[24] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[25] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[26] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[27] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[28] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[29] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[30] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[31] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 42
PAD LOCATION ( 1/33 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 43
PAD LOCATION ( 1/33 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[16] 3064-246 362 SEG[168] 2175-1109 402 COM[15] 3064-216 363 SEG[169] 2205-1109 403 COM[14] 3064-186 364 SEG[170] 2235-1109 404 COM[13] 3064-156 365 SEG[171] 2265-1109 405 COM[12] 3064-126 366 SEG[172] 2295-1109 406 COM[11] 3064-96 367 SEG[173] 2325-1109 407 COM[10] 3064-66 368 SEG[174] 2355-1109 408 COM[9] 3064-36 369 SEG[175] 2385-1109 409 COM[8] 3064-6 370 SEG[176] 2415-1109 410 COM[7] 3064 24 371 SEG[177] 2445-1109 411 COM[6] 3064 54 372 SEG[178] 2475-1109 412 COM[5] 3064 84 373 SEG[179] 2505-1109 413 COM[4] 3064 114 374 SEG[180] 2535-1109 414 COM[3] 3064 144 375 SEG[181] 2565-1109 415 COM[2] 3064 174 376 SEG[182] 2595-1109 416 COM[1] 3064 204 377 SEG[183] 2625-1109 417 COM[0] 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[31] 3064-696 426 NC 3064 504 387 COM[30] 3064-666 427 NC 3064 534 388 COM[29] 3064-636 428 NC 3064 564 389 COM[28] 3064-606 429 NC 3064 594 390 COM[27] 3064-576 430 NC 3064 624 391 COM[26] 3064-546 431 NC 3064 654 392 COM[25] 3064-516 432 NC 3064 684 393 COM[24] 3064-486 433 NC 3064 714 394 COM[23] 3064-456 434 COMS2 3064 744 395 COM[22] 3064-426 396 COM[21] 3064-396 397 COM[20] 3064-366 398 COM[19] 3064-336 399 COM[18] 3064-306 400 COM[17] 3064-276 PAD No. PAD Name X Unit: (um) Y 44
PAD LOCATION ( 1/17 duty, SHL=0,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 45
PAD LOCATION ( 1/17 duty, SHL=0,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 NC -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 NC -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 NC -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 NC -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 NC -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 NC -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 NC -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 NC -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 NC -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 NC -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 NC -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 NC -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 NC -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 NC -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 NC -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 NC -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[15] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[14] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[13] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[12] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[11] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[10] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[9] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[8] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[7] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[6] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[5] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[4] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[3] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[2] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[1] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[0] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 46
PAD LOCATION ( 1/17 duty, SHL=0,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 47
PAD LOCATION ( 1/17 duty, SHL=0,4-4) 361 SEG[167] 2145-1109 401 COM[15] 3064-246 362 SEG[168] 2175-1109 402 NC 3064-216 363 SEG[169] 2205-1109 403 NC 3064-186 364 SEG[170] 2235-1109 404 NC 3064-156 365 SEG[171] 2265-1109 405 NC 3064-126 366 SEG[172] 2295-1109 406 NC 3064-96 367 SEG[173] 2325-1109 407 NC 3064-66 368 SEG[174] 2355-1109 408 NC 3064-36 369 SEG[175] 2385-1109 409 NC 3064-6 370 SEG[176] 2415-1109 410 NC 3064 24 371 SEG[177] 2445-1109 411 NC 3064 54 372 SEG[178] 2475-1109 412 NC 3064 84 373 SEG[179] 2505-1109 413 NC 3064 114 374 SEG[180] 2535-1109 414 NC 3064 144 375 SEG[181] 2565-1109 415 NC 3064 174 376 SEG[182] 2595-1109 416 NC 3064 204 377 SEG[183] 2625-1109 417 NC 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[0] 3064-696 426 NC 3064 504 387 COM[1] 3064-666 427 NC 3064 534 388 COM[2] 3064-636 428 NC 3064 564 389 COM[3] 3064-606 429 NC 3064 594 390 COM[4] 3064-576 430 NC 3064 624 391 COM[5] 3064-546 431 NC 3064 654 392 COM[6] 3064-516 432 NC 3064 684 393 COM[7] 3064-486 433 NC 3064 714 394 COM[8] 3064-456 434 COMS2 3064 744 395 COM[9] 3064-426 396 COM[10] 3064-396 397 COM[11] 3064-366 398 COM[12] 3064-336 399 COM[13] 3064-306 400 COM[14] 3064-276 PAD No. PAD Name X Unit: (um) Y 48
PAD LOCATION ( 1/17 duty, SHL=1,4-1) RW1097-0A-001 Unit: (um) 1 NC 2868 1132 41 EXD 1264 1132 81 D4-336 1132 2 NC 2828 1132 42 1224 1132 82 D5-376 1132 3 NC 2788 1132 43 1184 1132 83 D6-416 1132 4 NC 2748 1132 44 2 1144 1132 84 D7-456 1132 5 NC 2708 1132 45 2 1104 1132 85-496 1132 6 NC 2668 1132 46 2 1064 1132 86 CLS -536 1132 7 NC 2628 1132 47 2 1024 1132 87-576 1132 8 NC 2588 1132 48 2 984 1132 88 C86-616 1132 9 NC 2548 1132 49 2 944 1132 89-656 1132 10 CAP6P 2508 1132 50 2 904 1132 90 PSB -696 1132 11 CAP6P 2468 1132 51 2 864 1132 91-736 1132 12 CAP2N 2428 1132 52 2 824 1132 92 IRS -776 1132 13 CAP2N 2388 1132 53 2 784 1132 93-816 1132 14 CAP4P 2348 1132 54 2 744 1132 94 NW0-856 1132 15 CAP4P 2308 1132 55 2 704 1132 95-896 1132 16 CAP2N 2268 1132 56 2 664 1132 96 NW1-936 1132 17 CAP2N 2228 1132 57 2 624 1132 97-976 1132 18 CAP2P 2188 1132 58 584 1132 98 NW2-1016 1132 19 CAP2P 2148 1132 59 544 1132 99-1056 1132 20 CAP1P 2108 1132 60 504 1132 100-1096 1132 21 CAP1P 2068 1132 61 464 1132 101 VRS -1136 1132 22 CAP1N 2028 1132 62 424 1132 102 2-1176 1132 23 CAP1N 1988 1132 63 384 1132 103 V4-1220 1132 24 CAP3P 1948 1132 64 344 1132 104 V4-1260 1132 25 CAP3P 1908 1132 65 304 1132 105 V3-1300 1132 26 CAP1N 1868 1132 66 CLL 264 1132 106 V3-1340 1132 27 CAP1N 1828 1132 67 224 1132 107 V2-1380 1132 28 CAP5P 1788 1132 68 CS1B 184 1132 108 V2-1420 1132 29 CAP5P 1748 1132 69 CS2 144 1132 109 V1-1460 1132 30 1708 1132 70 104 1132 110 V1-1500 1132 31 1668 1132 71 RSTP 64 1132 111 V0-1540 1132 32 1628 1132 72 A0 24 1132 112 V0-1580 1132 33 1588 1132 73-16 1132 113 V0-1620 1132 34 1548 1132 74 RW -56 1132 114 V0-1660 1132 35 1508 1132 75 E -96 1132 115 V0-1700 1132 36 1468 1132 76-136 1132 116 V0-1740 1132 37 1428 1132 77 D0-176 1132 117 VRAB -1780 1132 38 LX 1388 1132 78 D1-216 1132 118-1824 1132 39 1344 1132 79 D2-256 1132 119 T[0] -1868 1132 40 EXD 1304 1132 80 D3-296 1132 120 T[1] -1914 1132 49
PAD LOCATION ( 1/17 duty, SHL=1,4-2) RW1097-0A-001 Unit: (um) 121 T[2] -1955 1132 161 NC -3064 264 201 SEG[7] -2655-1109 122 T[3] -1996 1132 162 NC -3064 234 202 SEG[8] -2625-1109 123 T[4] -2037 1132 163 NC -3064 204 203 SEG[9] -2595-1109 124 T[5] -2078 1132 164 NC -3064 174 204 SEG[10] -2565-1109 125 T[6] -2119 1132 165 NC -3064 144 205 SEG[11] -2535-1109 126 T[7] -2160 1132 166 NC -3064 114 206 SEG[12] -2505-1109 127 T[8] -2201 1132 167 NC -3064 84 207 SEG[13] -2475-1109 128 T[9] -2242 1132 168 NC -3064 54 208 SEG[14] -2445-1109 129 T[10] -2283 1132 169 NC -3064 24 209 SEG[15] -2415-1109 130 T[11] -2324 1132 170 NC -3064-6 210 SEG[16] -2385-1109 131 NC -2364 1132 171 NC -3064-36 211 SEG[17] -2355-1109 132 NC -2404 1132 172 NC -3064-66 212 SEG[18] -2325-1109 133 NC -2444 1132 173 NC -3064-96 213 SEG[19] -2295-1109 134 NC -2484 1132 174 NC -3064-126 214 SEG[20] -2265-1109 135 NC -2524 1132 175 NC -3064-156 215 SEG[21] -2235-1109 136 NC -2564 1132 176 NC -3064-186 216 SEG[22] -2205-1109 137 NC -2604 1132 177 COM[0] -3064-216 217 SEG[23] -2175-1109 138 NC -2644 1132 178 COM[1] -3064-246 218 SEG[24] -2145-1109 139 NC -2684 1132 179 COM[2] -3064-276 219 SEG[25] -2115-1109 140 NC -2724 1132 180 COM[3] -3064-306 220 SEG[26] -2085-1109 141 NC -2764 1132 181 COM[4] -3064-336 221 SEG[27] -2055-1109 142 NC -2804 1132 182 COM[5] -3064-366 222 SEG[28] -2025-1109 143 NC -2844 1132 183 COM[6] -3064-396 223 SEG[29] -1995-1109 144 NC -2884 1132 184 COM[7] -3064-426 224 SEG[30] -1965-1109 145 NC -3064 744 185 COM[8] -3064-456 225 SEG[31] -1935-1109 146 NC -3064 714 186 COM[9] -3064-486 226 SEG[32] -1905-1109 147 NC -3064 684 187 COM[10] -3064-516 227 SEG[33] -1875-1109 148 NC -3064 654 188 COM[11] -3064-546 228 SEG[34] -1845-1109 149 NC -3064 624 189 COM[12] -3064-576 229 SEG[35] -1815-1109 150 NC -3064 594 190 COM[13] -3064-606 230 SEG[36] -1785-1109 151 NC -3064 564 191 COM[14] -3064-636 231 SEG[37] -1755-1109 152 NC -3064 534 192 COM[15] -3064-666 232 SEG[38] -1725-1109 153 NC -3064 504 193 COMS1-3064 -696 233 SEG[39] -1695-1109 154 NC -3064 474 194 SEG[0] -2865-1109 234 SEG[40] -1665-1109 155 NC -3064 444 195 SEG[1] -2835-1109 235 SEG[41] -1635-1109 156 NC -3064 414 196 SEG[2] -2805-1109 236 SEG[42] -1605-1109 157 NC -3064 384 197 SEG[3] -2775-1109 237 SEG[43] -1575-1109 158 NC -3064 354 198 SEG[4] -2745-1109 238 SEG[44] -1545-1109 159 NC -3064 324 199 SEG[5] -2715-1109 239 SEG[45] -1515-1109 160 NC -3064 294 200 SEG[6] -2685-1109 240 SEG[46] -1485-1109 50
PAD LOCATION ( 1/17 duty, SHL=1,4-3) RW1097-0A-001 Unit: (um) 241 SEG[47] -1455-1109 281 SEG[87] -255-1109 321 SEG[127] 945-1109 242 SEG[48] -1425-1109 282 SEG[88] -225-1109 322 SEG[128] 975-1109 243 SEG[49] -1395-1109 283 SEG[89] -195-1109 323 SEG[129] 1005-1109 244 SEG[50] -1365-1109 284 SEG[90] -165-1109 324 SEG[130] 1035-1109 245 SEG[51] -1335-1109 285 SEG[91] -135-1109 325 SEG[131] 1065-1109 246 SEG[52] -1305-1109 286 SEG[92] -105-1109 326 SEG[132] 1095-1109 247 SEG[53] -1275-1109 287 SEG[93] -75-1109 327 SEG[133] 1125-1109 248 SEG[54] -1245-1109 288 SEG[94] -45-1109 328 SEG[134] 1155-1109 249 SEG[55] -1215-1109 289 SEG[95] -15-1109 329 SEG[135] 1185-1109 250 SEG[56] -1185-1109 290 SEG[96] 15-1109 330 SEG[136] 1215-1109 251 SEG[57] -1155-1109 291 SEG[97] 45-1109 331 SEG[137] 1245-1109 252 SEG[58] -1125-1109 292 SEG[98] 75-1109 332 SEG[138] 1275-1109 253 SEG[59] -1095-1109 293 SEG[99] 105-1109 333 SEG[139] 1305-1109 254 SEG[60] -1065-1109 294 SEG[100] 135-1109 334 SEG[140] 1335-1109 255 SEG[61] -1035-1109 295 SEG[101] 165-1109 335 SEG[141] 1365-1109 256 SEG[62] -1005-1109 296 SEG[102] 195-1109 336 SEG[142] 1395-1109 257 SEG[63] -975-1109 297 SEG[103] 225-1109 337 SEG[143] 1425-1109 258 SEG[64] -945-1109 298 SEG[104] 255-1109 338 SEG[144] 1455-1109 259 SEG[65] -915-1109 299 SEG[105] 285-1109 339 SEG[145] 1485-1109 260 SEG[66] -885-1109 300 SEG[106] 315-1109 340 SEG[146] 1515-1109 261 SEG[67] -855-1109 301 SEG[107] 345-1109 341 SEG[147] 1545-1109 262 SEG[68] -825-1109 302 SEG[108] 375-1109 342 SEG[148] 1575-1109 263 SEG[69] -795-1109 303 SEG[109] 405-1109 343 SEG[149] 1605-1109 264 SEG[70] -765-1109 304 SEG[110] 435-1109 344 SEG[150] 1635-1109 265 SEG[71] -735-1109 305 SEG[111] 465-1109 345 SEG[151] 1665-1109 266 SEG[72] -705-1109 306 SEG[112] 495-1109 346 SEG[152] 1695-1109 267 SEG[73] -675-1109 307 SEG[113] 525-1109 347 SEG[153] 1725-1109 268 SEG[74] -645-1109 308 SEG[114] 555-1109 348 SEG[154] 1755-1109 269 SEG[75] -615-1109 309 SEG[115] 585-1109 349 SEG[155] 1785-1109 270 SEG[76] -585-1109 310 SEG[116] 615-1109 350 SEG[156] 1815-1109 271 SEG[77] -555-1109 311 SEG[117] 645-1109 351 SEG[157] 1845-1109 272 SEG[78] -525-1109 312 SEG[118] 675-1109 352 SEG[158] 1875-1109 273 SEG[79] -495-1109 313 SEG[119] 705-1109 353 SEG[159] 1905-1109 274 SEG[80] -465-1109 314 SEG[120] 735-1109 354 SEG[160] 1935-1109 275 SEG[81] -435-1109 315 SEG[121] 765-1109 355 SEG[161] 1965-1109 276 SEG[82] -405-1109 316 SEG[122] 795-1109 356 SEG[162] 1995-1109 277 SEG[83] -375-1109 317 SEG[123] 825-1109 357 SEG[163] 2025-1109 278 SEG[84] -345-1109 318 SEG[124] 855-1109 358 SEG[164] 2055-1109 279 SEG[85] -315-1109 319 SEG[125] 885-1109 359 SEG[165] 2085-1109 280 SEG[86] -285-1109 320 SEG[126] 915-1109 360 SEG[166] 2115-1109 51
PAD LOCATION ( 1/17 duty, SHL=1,4-4) 361 SEG[167] 2145-1109 401 COM[0] 3064-246 362 SEG[168] 2175-1109 402 NC 3064-216 363 SEG[169] 2205-1109 403 NC 3064-186 364 SEG[170] 2235-1109 404 NC 3064-156 365 SEG[171] 2265-1109 405 NC 3064-126 366 SEG[172] 2295-1109 406 NC 3064-96 367 SEG[173] 2325-1109 407 NC 3064-66 368 SEG[174] 2355-1109 408 NC 3064-36 369 SEG[175] 2385-1109 409 NC 3064-6 370 SEG[176] 2415-1109 410 NC 3064 24 371 SEG[177] 2445-1109 411 NC 3064 54 372 SEG[178] 2475-1109 412 NC 3064 84 373 SEG[179] 2505-1109 413 NC 3064 114 374 SEG[180] 2535-1109 414 NC 3064 144 375 SEG[181] 2565-1109 415 NC 3064 174 376 SEG[182] 2595-1109 416 NC 3064 204 377 SEG[183] 2625-1109 417 NC 3064 234 378 SEG[184] 2655-1109 418 NC 3064 264 379 SEG[185] 2685-1109 419 NC 3064 294 380 SEG[186] 2715-1109 420 NC 3064 324 381 SEG[187] 2745-1109 421 NC 3064 354 382 SEG[188] 2775-1109 422 NC 3064 384 383 SEG[189] 2805-1109 423 NC 3064 414 384 SEG[190] 2835-1109 424 NC 3064 444 385 SEG[191] 2865-1109 425 NC 3064 474 386 COM[15] 3064-696 426 NC 3064 504 387 COM[14] 3064-666 427 NC 3064 534 388 COM[13] 3064-636 428 NC 3064 564 389 COM[12] 3064-606 429 NC 3064 594 390 COM[11] 3064-576 430 NC 3064 624 391 COM[10] 3064-546 431 NC 3064 654 392 COM[9] 3064-516 432 NC 3064 684 393 COM[8] 3064-486 433 NC 3064 714 394 COM[7] 3064-456 434 COMS2 3064 744 395 COM[6] 3064-426 396 COM[5] 3064-396 397 COM[4] 3064-366 398 COM[3] 3064-336 399 COM[2] 3064-306 400 COM[1] 3064-276 PAD No. PAD Name X Unit: (um) Y 52
PIN DESCRIPTION Pin Name I/O Description No. of Pins LCD driver outputs SEG0 to SEG191 O LCD segment driver outputs This display data and the FRR signal control the output voltage of segment driver. Segment driver output voltage Display data FRR Normal display Reverse display H H VLCD(V0) V 2 H L V SS V 3 L H V 2 VLCD(V0) L L V 3 V SS Power save mode V SS V SS 192 LCD common driver outputs This internal scanning data and FRR signal control the output voltage of common driver. Display data FRR Common driver output voltage Normal Reverse display display COM0 to COM95 O H H V SS H L VLCD(V0) L H V 1 96 L L V 4 Power save mode V SS COMS1, COMS2 O Common output for the icons The output signals of two pins are same. When not used, this pin should be left open. 2 53
Pin Name I/O Description No. of Pins LCD Driver Setting pins and signal output pins Microprocessor interface select input pin PSB= H : parallel data input. PSB= L : serial data input. (3-line/4-line serial or IIC serial PSB I interface) When 4-line serial interface is applied, D0 to D5 are fixed to H ", E and R/W are fixed to H ". When 3-line serial interface is applied, D0 to D5 are fixed to " H ",E and R/W are fixed to " H ",A0 is fixed to L Input mode select 1 C86 I PSB C86 Interface " H " " H " 6800-series 8 bit /4 bit parallel MPU interface " L " " H " 3-SPI/4-SPI MPU interface " L " " L " IIC serial interface 1 CLL CLS IRS NW0, NW1, NW2 I/O I I I Input/output. I/O selection CLS = H :Output CLS = L : Input Oscillator select When the on-chip oscillator is used, this input must be connected to. When the external clock input is used, this input must be connected to. An external clock is connected to CLL pin. This terminal selects the resistors for the V0 voltage level adjustment. IRS = H : Use the internal resistors. IRS = L : Do not use the internal resistors. The V0 voltage level is regulated by an external resistive voltage divider attached to the VRAB terminal Use these pins can select duty mode: NW2 NW1 NW0 Duty Select 1 0 1 97 x 192 1 0 0 81 x 192 0 1 1 65 x 192 0 1 0 49 x 192 0 0 1 33 x 192 0 0 0 17 x 192 1 1 1 3 54
Pin Name I/O Description No. of Pins System Bus Connection Pins Chip select input pins Data/instruction I/O is enabled only when CS1B is L and CS1B,CS2 I CS2 is H. When chip select is non-active, DB0 to DB7 is high impedance. 2 RSTP A0 (RS) RW E I I I I Reset input pin When RSTP is L, initialization is executed. It determines whether the data bits are data or a command. A0=" H : Indicates that D0 to D7 are display data. A0=" L : Indicates that D0 to D7 are control data. There is no A0 pin in IIC interface, so this pin can fix to L Read/Write execution control pin PIN Description Read/Write control input pin RW RW=" H : read RW=" L : write When in the serial interface must fixed to H ". Read/Write execution control pin PIN Description Read/Write control input pin R/W=" H : When E is H ", D0 to D7 are in an output status. E R/W=" L : The data on D0 to D7 are latched at the falling edge of the E signal. When in the serial interface must fixed to H ". 1 1 1 1 55
When the Parallel interface is selected (PSB=" H "& C86= H ): 8-bit interface 8-bit bi-directional data bus that is connected to the standard 8-bit microprocessor data bus. When chip select is not active, D0 to D7 is high impedance. (PSB=" H "& C86= H ): 4-bit interface In 4-bit mode, D4 to D7 connect to microprocessor data bus, the D0 to D3 connect to high impedance. When the serial interface is selected (PSB= L & C86= H ):3/4-line SPI Interface D7: serial input data (SI) D6: serial input clock (SCLK) D5, D4, D3, D2, D1, D0: must fixed to H.. When chip select is not active, D0 to D7 is high impedance. In 3-SPI interface, A0 pin must fixed to L When the IIC serial interface is selected (PSB= L & C86= L ): IIC Interface D0 is SA0 D1 is SA1 D5 to D0 D6/SDA/SCLK D7 /SI/SCL I/O SA1, SA0: Is slave address bit1 and bit0, must fixed to H or L. D2,D3 are SDA_OUT D4,D5,D6 are SDA_IN D7 is SCL 8 D6(SDA_IN): serial input data SDA_OUT: serial data acknowledge output for the I 2 C interface. D7(SCL): serial clock input By connecting SDA_OUT to SDA_IN externally, the SDA line becomes fully 2-line interface compatible. Having the acknowledge output separated from the serial data line is advantageous in chip on glass (COG) applications. In COG application where the track resistance from the SDA_OUT pad to the system SDA line can be significant, a potential divider is generated by the bus pull-up resistor and the ITO track resistance. It is possible the during the acknowledge cycle the RW1097 will not be able to create a valid logic 0 level. By splitting the SDA_IN input from the SDA_OUT output the device could be used in a mode that ignores the acknowledge bit. In COG applications where the acknowledge cycle is required, it is necessary to minimize the track resistance from the SDA_OUT pad to the system SDA line to guarantee a valid low level. All Pad of SDA_IN, SDA_OUT must be connected together (SDA) 56
Power Supply Pins 2 2 CAP1P CAP1N CAP2P CAP2N CAP3P CAP4P CAP5P CAP6P V0, V1, V2, V3, V4 VRS VRAB Power Supply Power Supply Power Supply Power Supply O O O O O O O O O Power Supply Power Supply I RW1097-0A-001 Digital Ground. The 2 supply rails and 2 must be connected together at the FPC side Analog Ground The 2 supply rails and 2 must be connected together at the FPC side Digital Supply voltage. The 2 supply rails V DD and V DD2 could be connected together. If Digital Option pin is high, must be this level. Power supply for DC/DC voltage converter The 2 supply rails V DD and V DD2 could be connected together. DC/DC voltage converter. Connect a capacitor between this terminal and. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. This is a multi-level power supply for the liquid crystal. V0 V1 V2 V3 V4 Monitor Voltage Regulator level, must be left open. 1 Output voltage regulator terminal. Provides the voltage between and V0 through a resistive voltage divider. IRS = L : the V0 voltage regulator internal resistors are not used. IRS = H : the V0 voltage regulator internal resistors are used. LX,EXD I/O Inductor type regulator pins 3 Test Pin Test[0]~Test[11] For test used. Test[0]~Test[11] must floating 12 2 6 8 9 8 2 4 2 4 2 2 2 2 14 1 57
RW1097 I/O PIN ITO resistance Limitation RW1097-0A-001 PIN Name ITO Resister C86, PSB,NW0,NW1,NW2, CLS,IRS No Limitation, 2,,2,,V0, VRAB,EXD,LX <100Ω V1, V2, V3, V4, CAP1P, CAP1N, CAP2P, CAP2N, CAP3P, CAP4P, CAP5P,CAP6P <500Ω CS1B,CS2, E, RW, A0, D0~D7 RSTP TEST0 11 <1KΩ <10KΩ Floating 58
FUNCTION DESCRIPTION The MPU Interface With the RW1097 chips data transfer are done through an 8-bit parallel data bus (DB0 to DB7) or through a serial data input (SI). Through selecting the PSB/C86 terminal polarity to the H or L it is possible to select either parallel data input or serial data input as shown in Table 1. Table 1. Interface PSB C86 CS1B CS2 A0(RS) E RW D7 D6 D5 D4 D3~D0 8-bit 6800 H H CS1B CS2 A0 E RW D7 D6 D5~D0 4-bit 6800 H H CS1B CS2 A0 E RW D7 D6 D5 D4 H 4-SPI L H CS1B H A0 H H SI SCLK H H H 3-SPI L H CS1B H L H H SI SCLK H H H D2~D3:SDA_OUT IIC L L H H L H H SCL SDA_IN D1~ D0:SA1~SA0 Parallel Interface: Parallel bus are selected by PSB and C86 input, and 4-bit and 8-bit parallel bus is selected by IF bit in the instruction register. During read or write operation, two 8-bit registers are used. One is data register (DR), the other is instruction register (IR). The data register (DR) is used as temporary data storage place for being written into or read from DDRAM/CGRAM/SEGRAM, target RAM is selected by RAM address setting instruction. Each internal operation, reading from or writing into RAM, is done automatically. So to speak, after MPU reads DR data, the data in the next DDRAM/CGRAM/SEGRAM address is transferred into DR automatically. Also after MPU writes data to DR, the data in DR is transferred into DDRAM/CGRAM/SEGRAM automatically. The Instruction register (IR) is used only to store instruction code transferred from MPU. MPU cannot use it to read instruction data. RS RW Operation 0 0 Instruction write operation (MPU writes Instruction code into IR) 0 1 Read busy flag (DB7) and address counter (DB0 - DB6) 1 0 Data write operation (MPU writes data into DR) 1 1 Data read operation (MPU reads data from DR) 59
SPI Interface: When the SPI interface has been selected (PSB= L,C86= H ),then it is possible to connect directly to an MPU through 4 pins serial interface configuration (A0,CS1B, SCLK, SI pin) or 3 pins serial interface (CS1B, SCLK, SI pin) configuration. Pins configuration is only difference between 4-SPI and 3-SPI. Interface PSB C86 CS1B CS2 A0(RS) E RW D7 D6 D5~D0 4SPI L H CS1B H A0 H H SI SCLK H 3SPI L H CS1B H L H H SI SCLK H The 4-SPI serial interface (PSB= L, C86= H ) When 4 pins serial interface configuration is used, A0 is used to realize incoming data is instruction/display data. A0 must be a certain state ( L or H ) when chip is in active mode (CS1B= L, and CS2= H ). A0 can t be kept tri-state or floating when chip is in active mode. It should be fine if A0 is low while power up. The 4-SPI example of timing sequence is shown below Figure 1. 60
The 3-SPI serial interface (PSB= L, C86= H ) When 3 pins serial interface configuration is used, A0 must be kept L or connected to. Data length instruction is used to realize incoming data is instruction/display data.ic will recognize the incoming data that after Set Data length for 3-SPI instruction as display data. User must set data length of the incoming data that after Data length instruction. Interface PSB C86 CS1B CS2 A0(RS) E RW D7 D6 D5~D0 4-SPI L H CS1B H A0 H H SI SCLK H 3-SPI L H CS1B H L H H SI SCLK H The 3-SPI example of timing sequence is shown below figure2; data length instruction is followed by Display data set. * When the chip is not active, the shift registers and the counter are reset to their initial states. * Reading is not possible while in serial interface mode (3-SPI,4-SPI and IIC interface). * Caution is required on the SCLK signal when it comes to line-end reflections and external noise. We recommend that operation be rechecked on the actual equipment. 61
IIC Interface(PSB= L, C86= L ) The IIC interface receives and executes the commands sent via the IIC Interface. It also receives RAM data and sends it to the RAM. The IIC Interface is for bi-directional, two-line communication between different ICs or modules. BIT Transfer One data bit is transferred during each clock pulse. The data on the SDA(DB6) line must remain stable during the HIGH period of the clock pulse because changes in START AND STOP CONDITIONS Both data and clock lines remain HIGH when the bus is not busy. A HIGH-to-LOW transition of the data line, while the clock is HIGH is defined as the START condition (S). SYSTEM CONFIGURATION The system configuration is illustrated in Figure 3. Transmitter: the device, which sends the data to the bus. Receiver: the device, which receives the data from the bus. Master: the device, which initiates a transfer, generates clock signals and terminates a transfer. Slave: the device addressed by a master. The two lines are a Serial Data line SDA and a Serial Clock line SCL. Both lines must be connected to a positive supply via a pull-up resistor. Data transfer may be initiated only when the bus is not busy. the data line at this time will be interpreted as a control signal. Bit transfer is illustrated in Figure 1. A LOW-to-HIGH transition of the data line while the clock is HIGH is defined as the STOP condition (P). The START and STOP conditions are illustrated in Figure 2 Multi-Master: more than one master can attempt to control the bus at the same time without corrupting the message. Arbitration: procedure to ensure that, if more than one master simultaneously tries to control the bus, only one is allowed to do so and the message is not corrupted. Synchronization: procedure to synchronize the clock signals of two or more devices. ACKNOWLEDGE Each byte of eight bits is followed by an acknowledge bit. The acknowledge bit is a HIGH signal put on the bus by the transmitter during which time the master generates an extra acknowledge related clock pulse. A slave receiver which is addressed must generate an acknowledge after the reception of each byte. A master receiver must also generate an acknowledge after the reception of each byte that has been clocked out of the slave transmitter. The device that acknowledges must pulldown the SDA line during the acknowledge clock pulse, so that the SDA line is stable LOW during the HIGH period of the acknowledge related clock pulse (set-up and hold times must be taken into consideration). A master receiver must signal an end-of-data to the transmitter by not generating an acknowledge on the last byte that has been clocked out of the slave. In this event the transmitter must leave the data line HIGH to enable the master to generate a STOP condition. Acknowledgement on the IIC Interface is illustrated in Figure 4. 62
SDA SCL data line stable; data valid change of data allowed Figure 1 Bit transfer SDA SCL S START con dition P STOP con dition Figure 2 Definition of START and STOP conditions MASTER TRANSMITTER/ RECEIVER SLAVE RECEIVER (1) 0111100 SLAVE RECEIVER (2) 0111101 SLAVE RECEIVER (3) 0111110 SLAVE RECEIVER (4) 0111111 SDA SCL Figure 3 System configuration DATA OUTPUT BY TRANSMITTER DATA OUTPUT BY RECEIVER SCL FROM MASTER S START condition not acknowledge acknowledge 1 2 8 9 clock pulse for acknowledge ment Figure 4 Acknowledgement on the 2-line Interface 63
IIC Interface Protocol The RW1097 supports command, data write addressed slaves on the bus. Before any data is transmitted on the IIC Interface, the device, which should respond, is addressed first. Four 7-bit slave addresses (0111100, 0111101, 0111110 and 0111111) are reserved for the RW1097. The least significant bit of the slave address is set by connecting the input (D0) SA0 and (D1) SA1 to either logic 0 () or logic 1 (). The IIC Interface protocol is illustrated in Figure 5. The sequence is initiated with a START condition (S) from the IIC Interface master, which is followed by the slave address. All slaves with the corresponding address acknowledge in parallel, all the others will ignore the IIC Interface transfer. After acknowledgement, one or more command words follow which define the status of the addressed slaves. A command word consists of a control byte, which defines Co and A0, plus a data byte. The last control byte is tagged with a cleared most significant bit (i.e. the continuation bit Co). After a control byte with a cleared Co bit, only data bytes will follow. The state of the A0 bit defines whether the data byte is interpreted as a command or as RAM data. All addressed slaves on the bus also acknowledge the control and data bytes. After the last control byte, depending on the A0 bit setting; either a series of display data bytes or command data bytes may follow. If the A0 bit is set to logic 1, these display bytes are stored in the display RAM at the address specified by the data pointer. The data pointer is automatically updated and the data is directed to the intended RW1092 device. If the A0 bit of the last control byte is set to logic 0, these command bytes will be decoded and the setting of the device will be changed according to the received commands. Only the addressed slave makes the acknowledgement after each byte. At the end of the transmission the IIC INTERFACE-bus master issues a STOP condition (P). Figure 5 2-line Interface protocol Last control byte to be sent. Only a stream of data bytes is allowed to follow. 0 This stream may only be terminated by s STOP or RE-START condition. Co Another control byte will follow the data byte unless a STOP or RE-START condition is 1 received. * Reading is not possible while in serial interface mode (3SPI,4SPI and IIC interface). 64
The Chip Select The RW1097 have two chips select terminals: CS1B and CS2. The MPU interface or the serial is enable only when CS1B= L and CS2= H. When the chip select is inactive, DB0 to DB7 enter a high impedance state, and the A0, E and RW inputs are inactive. When the serial interface is selected, the shift register and the counter are reset. BUSY FLAG (BF) When BF = "High", it indicates that the internal operation is being processed. So during this time the next instruction cannot be accepted. BF can be read, when A0 = Low and RW = High (Read Instruction Operation), through DB7 Before executing the next instruction, be sure that BF is not High. Address counter(ac) Address counter(ac)is used for address pointer of DDRAM/SEGRAM. (AC) can be set by instruction and after data read or write to the memories (AC) will increase or decrease by 1 according to the setting in entry mode set. When A0= 0 and RW= 1 and E= 1 the value of(ac)will output to DB6~DB0. CURSOR/BLINK CONTROL CIRCUIT It controls cursor/blink ON/OFF and black/white inversion at cursor position. LCD DRIVER CIRCUIT LCD driver have 97 commons and 192 segments to drive the LCD panel. Segment data from CGRAM /CGROM /HCGROM/SEGRAM are shifted into the 192 bits segment latches serially, and then it is stored to 192 bit shift latch. When each COM is selected by 97 bits common register, segment data also output through segment driver from 192 bits segment latch. Please refer below display duty mode: 1-line display mode, COM0-COM15 and COMS1/COMS2 have 1/17 duty. 2-line display mode, COM0-COM31 and COMS1/COMS2 have 1/33 duty. 3-line display mode, COM0-COM47 and COMS1/COMS2 have 1/49 duty. 4-line display mode, COM0-COM63 and COMS1/COMS2 have 1/65 duty. 5-line display mode, COM0-COM79 and COMS1/COMS2 have 1/81 duty. 6-line display mode, COM0-COM95 and COMS1/COMS2 have 1/97 duty. 65
16x16 character generation ROM (CGROM) and 8x16 half height ROM(HCGROM ) RW1097 provides character generation ROM supporting 8192 sets 16 x 16 character fonts and 128 sets 8 x 16 alphanumeric characters. It supports multi languages application such as Chinese or Japanese or Korean and English. Two consecutive bytes are used to specify one 16x16 character or two 8x16 half-height characters. Character codes are written into DDRAM and the corresponding fonts are mapped from CGROM or HCGROM to the display drivers. Customized HCGROM data is acceptable. HCGROM Font Data HCGROM show in Display Table 1.RW1097-0A-001 HCGROM Font Data 66
Character generation RAM (CGRAM) RW1097 provides RAM to support 72 sets 16x16 bits user-defined fonts. These user-defined characters are displayed the same ways as CGROM fonts through writing character font code A0A0H ~ A0AFH, A0B0H ~ A0BFH, A0C0H ~ A0CFH, A0D0H ~ A0DFH, A0E0H ~ A0E7H to DDRAM. Table 2 Relationship between CGRAM Address and Display Pattern DDRAM DATA (FONT CODE) B15~B8 CGRAM ADDRESS (bit10~bit4) CGRAM ADDRESS (bit3~bit0) CGRAM DATA (High Byte) CGRAM DATA (Low Byte) B7 B6 B5 B4 B3 B2 B1 B0 A6 A5 A4 A3 A2 A1 A0 C3 C2 C1 C0 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 1 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 10100000 (0XA0H) 10100000 (0XA0H) 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 1 0 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 0 0 0 0 0 1 0 0 1 0 1 1 0 0 1 0 0 1 0 0 0 0 0 0 0 0 1 0 1 1 0 0 0 0 1 0 0 1 0 0 0 0 0 1 0 0 1 0 1 1 0 1 0 1 0 0 0 1 0 0 0 0 0 1 0 0 0 0 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0 1 0 0 0 0 0 1 0 0 0 1 0 0 1 0 0 1 0 0 1 1 0 0 0 0 0 1 1 0 1 0 0 0 1 0 0 1 0 1 0 0 0 0 0 0 1 0 0 1 1 1 1 1 1 1 0 1 1 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 1 0 1 0 0 0 0 1 0 0 0 1 1 0 0 1 1 1 1 1 0 0 1 0 0 0 0 1 0 0 10100000 (0XA0H) 10100001 (0XA1H) 0 0 0 0 0 0 1 0 1 1 1 0 1 0 0 0 1 0 0 0 1 1 1 1 1 0 0 1 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 1 1 1 1 0 0 1 0 0 0 1 0 0 0 1 0 1 0 0 1 0 0 0 1 0 0 1 0 0 1 1 0 0 0 1 0 1 1 0 1 1 1 1 1 0 0 1 0 1 0 0 0 0 0 1 1 0 0 0 1 0 0 0 1 0 0 1 1 0 0 0 0 0 0 1 1 0 1 0 1 0 0 0 1 0 0 1 0 0 0 0 0 1 0 1 1 1 0 0 1 0 1 0 1 0 0 1 0 0 0 0 0 1 0 10100000 (0XA0H) 10100000 (0XA0H) 1 1 1 1 0 1 0 0 1 0 0 0 0 1 1 1 1 1 1 0 : : : user-defined font data 11100111 (0XE7H) 1000111 0000 1111 user-defined font data Note: 1. CGRAM address bit10~bit4 can be specified by set CGRAM address command, bit3~bit0 are not accessible by user. 2. CGRAM data for each address is 16 bits. 67
Use Character Generation RAM (CGRAM) make a Graphic or ICON show in Display Example: Step 1: creative ICON Data 68
Step 2: Write Command/Data 1. Set CGRAM ADDRESS (Instruction Table 3). 2. Write data to CGRAM (High Byte and Low Byte). Code: 1.Write command(0x0a);//instruction Table 3 Write command(0x80);//set CGRAM Address 2.Write data(0x00);//cgram Data High Byte Write data(0x1f);//cgram Data High Byte Write data(0x10);//cgram Data High Byte Write data(0x10);//cgram Data High Byte Write data(0x60);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x8d);//cgram Data High Byte Write data(0x60);//cgram Data High Byte Write data(0x10);//cgram Data High Byte Write data(0x10);//cgram Data High Byte Write data(0x1f);//cgram Data High Byte Write data(0x00);//cgram Data High Byte Write data(0x00);//cgram Data Low Byte Write data(0xff);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0xb7);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0x01);//cgram Data Low Byte Write data(0xff);//cgram Data Low Byte Write data(0x00);//cgram Data Low Byte 3.Set DDRAM ADDRESS 3.Write command(0x08);//instruction Table 1 (Instruction Table1) Write command(0x80);//set DDRAM Address 4. Write Font Code data. 4.Write data(0xa0);//write Font Code data Write data(0xa0);//write Font Code data ICON show in Display: 69
SEGRAM (SEGMENT ICON RAM) SEGRAM has segment control data and segment pattern data. There are 2 ICON pins (COMS1/COMS2) act as the COM line to display the icon SEGRAM data. The outputs of these 2 ICON pins are exactly the same. SEGRAM Address Table 3. Relationship between SEGRAM Address and Display Pattern High Byte SEGRAM Data Display Pattern Low Byte A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 D7 D6 D5 D4 D3 D2 D1 D0 0 0 0 0 S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 0 0 0 1 S16 S17 S18 S19 S20 S21 S22 S23 S24 S25 S26 S27 S28 S29 S30 S31 0 0 1 0 S32 S33 S34 S35 S36 S37 S38 S39 S40 S41 S42 S43 S44 S45 S46 S47 0 0 1 1 S48 S49 S50 S51 S52 S53 S54 S55 S56 S57 S58 S59 S60 S61 S62 S63 0 1 0 0 S64 S65 S66 S67 S68 S69 S70 S71 S72 S73 S74 S75 S76 S77 S78 S79 0 1 0 1 S80 S81 S82 S83 S84 S85 S86 S87 S88 S89 S90 S91 S92 S93 S94 S95 0 1 1 0 S96 S97 S98 S99 S100 S101 S102 S103 S104 S105 S106 S107 S108 S109 S110 S111 0 1 1 1 S112 S113 S114 S115 S116 S117 S118 S119 S120 S121 S122 S123 S124 S125 S126 S127 1 0 0 0 S128 S129 S130 S131 S132 S133 S134 S135 S136 S137 S138 S139 S140 S141 S142 S143 1 0 0 1 S144 S145 S146 S147 S148 S149 S150 S151 S152 S153 S154 S155 S156 S157 S158 S159 1 0 1 0 S160 S161 S162 S163 S164 S165 S166 S167 S168 S169 S170 S171 S172 S173 S174 S175 1 0 1 1 S176 S177 S178 S179 S180 S181 S182 S183 S184 S185 S186 S187 S188 S189 S190 S191 1 1 0 0 X X X X X X X X X X X X X X X X 1 1 0 1 X X X X X X X X X X X X X X X X 1 1 1 0 X X X X X X X X X X X X X X X X 1 1 1 1 X X X X X X X X X X X X X X X X 70
DISPLAY DATA RAM (DDRAM) There are 72x2 bytes for display data RAM area. Can store display data for 12 characters (16x16) by 6 lines. The 6 line data can be displayed at a time. Character codes stored in DDRAM point to the fonts specified by CGROM,HCGROM and CGRAM. RW1097 display half height HCGROM fonts, user-defined CGRAM fonts and full 16x16 CGROM fonts. Data codes A0A0H~A0AFH, A0B0H~A0BFH, A0C0H~A0CFH, A0D0H~ A0DFH, A0E0H~A0E7H are for CGRAM user-defined fonts. Data codes 00H~7FH are for half height alpha numeric fonts. Data codes (A1A0~F7FF) are for Simplified Chinese GB code. 1. display HCGROM fonts:write 2 bytes data to DDRAM to display two 8x16 fonts. Each byte represents 1 character font. The data of each byte is 00H~7FH. 2. display CGRAM fonts:write 2 bytes data to DDRAM to display one 16x16 font. Only A0A0H~A0AFH, A0B0H~A0BFH, A0C0H~A0CFH, A0D0H~A0DFH, A0E0H~A0E7H are allowed. 3. display CGROM fonts:write 2 bytes data to DDRAM to display one 16x16 font. A1A0H~F7FFH are for Simplified Chinese(GB) code. Higher byte(d15~d8)are written first and then lower byte(d7~d0) CGRAM and CGROM font code ( 16 bit ) can be only displayed in the start position of each DDRAM address.(h + L), HCGROM ( 8 x 16 ) can be display either H or L byte in DDRAM area. Table 4: Relationship between DDRAM Address and Display Pattern CGROM/CGRAM write correct CGROM/CGRAM write incorrect CGROM/CGRAM write incorrect CGROM/CGRAM write incorrect CGROM/CGRAM write correct 71
Power Supply Circuit The Power Supply circuits generate the voltage levels necessary to drive liquid crystal driver circuits with low power consumption and the fewest components. There are voltage converter circuits, voltage regulator circuits, and voltage follower circuits. They are controlled by power control instruction. Table 5 shows the referenced combinations in using Power Supply circuits. Table 5 shows the referenced combinations in using Power Supply circuits. User setup External power supply used Power Control set (VB VR VF) Power Control set HEX code VB circuit VR circuit VF circuit 0 0 0 0x28H OFF OFF OFF V0 V1 to V4 External input External input External input Only booster circuit used 1 0 0 0x2CH ON OFF OFF Internal External input External input booster circuit and regulator circuit used 1 1 0 0x2EH ON ON OFF Internal Internal External input Internal power supply circuit used 1 1 1 0x2FH ON ON ON Internal Internal Internal 72
Voltage Converter Circuits (Capacitor type booster circuit) Using the step-up voltage circuits equipped within the RW1097 chips it is possible to product a 2X,3X,4X,5X,6X or 7X step-up of the 2 voltage levels. 2X set-up: Connect capacitor C1 between C1N and C1P, between and, leave C2N open and short between C2P, C3P, C4P C5P and C6P to. 3X set-up: Connect capacitor C1 between C1N and C1P, between C2N and C2P, and between and, and short between C3P, C4P C5P and C6P to. 4X set-up: Connect capacitor C1 between C1N and C1P, between C2N and C2P, between C1N and C3P, between and, short between C4P,C5P and C6P to. 5X set-up: Connect capacitor C1 between C1N and C1P, between C2N and C2P, between C1N and C3P, between C2N and C4P, and between and, short between C5P and C6P to. 6X set-up: Connect capacitor C1 between C1N and C1P, between C2N and C2P, between C1N and C3P, between C2N and C4P, between C1N and C5P, and between and, short C6P to. 7X set-up: Connect capacitor C1 between C1N and C1P, between C2N and C2P, between C1N and C3P, between C2N and C4P, between C1N and C5P, between C1N and C6P, and between and. * The 2 voltage range must be set so that the terminal voltage does not exceed the absolute maximum rated value. 73
Capacitor type Booster Circuit Set-up by software By select DC-DC Set up (2X, 3X, 4X, 5X, 6X, 7X) commands, we could easily set the built-in capacitor type booster performance with suitable current consumption. Booster Circuit is setting 7X If booster circuits are setting 7X, the Select DC-DC Set-up command it can setting booster circuit to 2X~7X. (24) Select DC-DC Set up Instruction RE1 RE2 RS RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Select DC-DC Set up 1 1 0 0 0 0 1 0 0 DC2 DC1 DC0 Selects one of 7 DC-DC set up to reduce the power consumption by this instruction. DC2 DC1 DC0 Selected DC-DC converter circuit 0 1 * 2 times boosting circuit 1 0 0 3 times boosting circuit (Default) 1 0 1 4 times boosting circuit 1 1 0 5 times boosting circuit 1 1 1 6 times boosting circuit 0 0 * 7 times boosting circuit 74
Inductor type regulator circuit setup: RW1097 has built-in a inductor type switching regulator as well, which can be selected by software. Inductor Type Switching Regulator Circuit Q1:2N7002K D1:1N5819 C1:1uF/25V~4.7uF/25V C2:1uF/16V~10uF/16V L1:2.2uH~10uH (IDC=80mA~100mA) 75
Voltage Regulator Circuits The function of the internal Voltage Regulator circuits is to determine liquid crystal operating voltage, V0, by adjusting resistors, Ra and Rb, within the range of V0 <. Because is the operating voltage of operational-amplifier circuits shown in Figure 1.,it is necessary to be applied internally or externally. For the Eq. 1, we determine V0 by Ra, Rb and VEV. The Ra and Rb are connected internally or externally by IRS pin. And VEV called the voltage of electronic volume is determined by Eq. 2, where the parameter is the value selected by instruction, "Set Reference Voltage Register", within the range 0 to 63. VREF voltage at Ta= 25 o C is shown in Table 6.. 76
In Case of Using Internal Resistors, Ra and Rb (IRS = H ) When IRS pin is "H", resistor Ra is connected internally between VR pin and, and Rb is connected between V0 and VR. We determine V0 by two instructions, Select Regulator resistor " and "Select electronic volume register". Table 7. Internal Rb / Ra Ratio depending on 3-bit Data (R2 R1 R0) 3-bit data settings (R2 R1 R0) 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 1 + (Rb / Ra) 2.6 3.4 4.2 5.0 5.8 6.6 7.4 8.3 Figure 2. shows V0 voltage measured by adjusting internal regulator register ratio (Rb / Ra) and 6-bit electronic volume registers for each temperature coefficient at Ta = 25 o C. 18.000 16.000 14.000 V0 Voltage 12.000 10.000 8.000 6.000 Ratio=2.6 Ratio=3.4 Ratio=4.2 Ratio=5 Ratio=5.8 Ratio=6.6 Ratio=7.4 Ratio=8.3 4.000 2.000 0.000 63 61 59 57 55 53 51 49 47 45 43 41 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 EC Value Figure 2. Electronic Volume register (α=0 to 63) Table 8 Shows the Range of V0 depending on the above Requirements. Table 8. The Range of V0 Ratio=000~111 Electronic volume level (EV Value) 0x00H (α=63)......... 0x3FH (α=0) V0 voltage 3.3V......... 17.0V 77
In Case of Using External Resistors, Ra and Rb (IRS = L ) When IRS pin is "L", it is necessary to connect external regulator resistor Ra between VR and, and Rb between V0 and VR. Example: For the following requirements 1. LCD driver voltage, V0 = 10.0V. 2. 6-bit reference voltage register = (1, 0, 0, 0, 0, 0) 3. Maximum current flowing Ra, Rb = 1.5 ua From Eq. 1 78
Voltage Follower Circuits V0 voltage (VLCD) is resistively divided into four voltage levels (V1, V2, V3 and V4), and those output impedance are converted by the Voltage Follower for increasing drive capability. Table 9 shows the relationship between V1 to V4 level and each duty ratio. Table 9. The Relationship between V1 to V4 Level and Each Duty Ratio LCD bias V1 V2 V3 V4 Remarks 1/N (N-1)/N x V0 (N-2)/N x V0 2/N x V0 1/N x V0 N = 5 to 11 1/N (N-1)/N x V0 (N-2)/N x V0 (N-2)/N x V0 (N-3)/N x V0 N=4 Follower voltage reference circuit: Internal Booster: (1) When the V0 voltage regulator internal resistor is used. (Example when 2=, with 4x set-up) (2) When the V0 voltage regulator internal resistor is not used. (Example when 2=, with 4x set-up) C1=2.2uF/25V~4.7uF/25V C2=2.2uF/25V~4.7uF/25V C1=2.2uF/25V~4.7uF/25V C2=2.2uF/25V~4.7uF/25V 79
External Booster: (1) When the V0 voltage regulator internal resistor is not used. (2) When the V0 voltage regulator internal resistor is not used. External Voltage =18.0V (Maximum) C2=2.2uF/25V~4.7uF/25V External Booster/Regulator: (1) When Follower circuit alone is used (V0 and connect together input external voltage) External Voltage =18.0V (Maximum) C2=2.2uF/25V~4.7uF/25V External Bias: (1) When the built-in power is not used External Voltage =18.0V (Maximum) C2=2.2uF/25V~4.7uF/25V 80
RESET CIRCUIT Setting RSTP to L can initialize internal function. When RSTP becomes L, following procedure is occurred. (5) Entry Mode Set : I/D=1,S=0 (6) Instruction Table Set: RE1,RE2=(0,0) (7) Function Set: IF=1,D=0,C=0,B=0 (9) Set DDRAM Address: AC6,AC5,AC4,AC3,AC2,AC1,AC0 =(0,0,0,0,0,0,0) (10) Set SEGRAM Address: AC3, AC2, AC1, AC0 = (0, 0, 0, 0) (12) Power Down Mode: PD=0 (13) COM and SEG Scan Direction Set: BID=0,SHL=0 (14) Cursor Blink and Display Reverse Set : REV=0,B/W=0 (15) Display Shift Set: DS6,DS5,DS4,DS3,DS2,DS1,DS0 =(0,0,0,0,0,0,0) (16) Set Data Length for 3-SPI: SD6.SD5,SD4,SD3,SD2,SD1,SD0=(0,0,0,0,0,0,0) (24) Select DC-DC Set up: DC2,DC1,DC1= (1,1,0) (25) Select LCD Bias: BS2,BS1,BS1 = (1,0,1) (26) Select Regulator Resistor: R2,R1,R0 = (1,0,0) (27) Select Electronic Volume Register : EV5,EV4,EV3,EV2,EV1,EV0=(1,0,0,0,0,0) (28) Power Control Set: SWON=0; VB,VR,VF = (0, 0, 0) (29) Frame Frequency Adjustment: DFR3, DFR2, DFR1, DFR0= (0,0,0,0) (30) Double Frame Frequency: FRR*2=0 While RSTP is L or reset instruction is executed, no instruction except read status can be accepted, any instruction can be accepted. RSTP must be connected to the reset pin of the MPU, and initialize the MPU and this LSI at the same time. The initialization by RSTP is essential before used. 81
INSTRUCTION TABLE RW1097 instruction Table 1 (RE1=0, RE2=0) Instruction RE1,RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Description (1) Read display data X 1 1 Read data (2) Write display data X 1 0 Write data (3) Clear Display X 0 0 0 0 0 0 0 0 0 1 (4) Return Home 0,0 0 0 0 0 0 0 0 0 1 X (5) Entry Mode Set 0,0 0 0 0 0 0 0 0 1 I/D S Read data into DDRAM/CGRAM/SEGRAM Write data into DDRAM/CGRAM/SEGRAM Write "20H" to DDRAM, and set DDRAM address to "00H" from AC Set DDRAM address to "00H" from AC and return cursor to its original position if shifted. The contents of DDRAM are not changed. Sets cursor move direction and specifies display shift. These operations are performed during write and read Execution Time Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 (6) Instruction Table Set X 0 0 0 0 0 0 1 X RE1 RE2 Set Instruction Table RE1,RE2=(0,0), table 1 (default) RE1,RE2=(0,1), table 2 RE1,RE2=(1,0), table 3 RE1,RE2=(1,1), table 4 Reference page 86 (7) Cursor or Display Shift Set 0,0 0 0 0 0 0 1 S/C R/L X X Cursor or display shift S/C="1": display shift S/C="0": cursor shift R/L="1": shift to right R/L="0": shift to left Reference page 86 (8) Function Set 0,0 0 0 0 0 1 IF D C B X Set Interface Data Length IF="1": 8-bit interface IF="0": 4-bit interface Set Display /Cursor/Blink On/OFF D="1": display on D="0": display off C="1": cursor on C="0": cursor off B="1": blink on B="0": blink off Reference page 86 (9) Set DDRAM Address 0,0 0 0 1 AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set DDRAM address in address counter Reference page 86 (10) Set SEGRAM Address (11) Read Busy Flag and Address 0,0 0 1 0 1 0 0 AC3 AC2 AC1 AC0 0,0 0 1 BF AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set ICON RAM address in address counter Can know internal operation is ready or not by reading BF. The contents of address counter can also be read. BF="1": busy state BF="0": ready state Reference page 86 Reference page 86 82
RW1097 instruction Table 2 (RE1=0, RE2=1) Instruction RE1,RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Description (1) Read display data X 1 1 Read data (2) Write display data X 1 0 Write data Read data into DDRAM/CGRAM/SEGRAM Write data into DDRAM/CGRAM/SEGRAM Execution Time Reference page 86 Reference page 86 (3) Clear Display X 0 0 0 0 0 0 0 0 0 1 Write "20H" to DDRAM, and set DDRAM address to "00H" from AC Reference page 86 (12) Power Down Mode 0,1 0 0 0 0 0 0 0 0 1 PD (13) COM and SEG Scan Direction Set (6) Instruction Table Set (14) Cursor Blink and Display Reverser Set 0,1 0 0 0 0 0 0 0 1 SHL BID X 0 0 0 0 0 0 1 X RE1 RE2 0,1 0 0 0 0 1 0 0 0 REV B/W Set power down mode bit. PD="1": power down mode enable PD="0": power down mode disable Segment bi-direction function BID="1": SEG 191 --> SEG 0 BID="0": SEG 0--> SEG 191 Common scan direction SHL="1": reverse SHL="0": normal RE1,RE2=(0,0), table 1(default) RE1,RE2=(0,1), table 2 RE1,RE2=(1,0), table 3 RE1,RE2=(1,1), table 4 Assign black/write inverting of cursor REV="1": display reverse REV="0": display normal B/W="1": black/write inverting of cursor enable. B/W="0": black/write inverting of cursor disable. (15) Display Shift Set 0,1 0 0 0 1 Determine the line for display shift DS6="1/0": 6th line display shift enable/disable DS5="1/0": 5th line display shift enable/disable DS6 DS5 DS4 DS3 DS2 DS1 DS4="1/0": 4th line display shift enable/disable DS3="1/0": 3rd line display shift enable/disable DS2="1/0": 2nd line display shift enable/disable DS1="1/0": 1st line display shift enable/disable (16) Set Data Length Set data length for 3-line Serial 0,1 0 0 1 SD6 SD5 SD4 SD3 SD2 SD1 SD0 for 3-SPI Interface Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 83
RW1097 instruction Table 3 (RE1=1, RE2=0) Instruction RE1,RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Description (1) Read display data X 1 1 Read data (2) Write display data X 1 0 Write data (3) Clear Display X 0 0 0 0 0 0 0 0 0 1 (6) Instruction Table Set X 0 0 0 0 0 0 1 X RE1 RE2 (17) Set HCGROM Code for Read Data Byte 1 (18) Set HCGROM Code for Read Data Byte 0 (19) Set CGROM Code for Read Data Byte 3 (20) Set CGROM Code for Read Data Byte 2 (21) Set CGROM Code for Read Data Byte 1 (22) Set CGROM Code for Read Data Byte 0 1,0 0 0 0 0 1 0 AC7 AC6 AC5 AC4 1,0 0 0 0 0 1 1 AC3 AC2 AC1 AC0 1,0 0 0 0 1 0 0 AC15 AC14 AC13 AC12 1,0 0 0 0 1 0 1 AC11 AC10 AC9 AC8 1,0 0 0 0 1 1 0 AC7 AC6 AC5 AC4 1,0 0 0 0 1 1 1 AC3 AC2 AC1 AC0 Read data into DDRAM/CGRAM/SEGRAM Write data into DDRAM/CGRAM/SEGRAM Write "20H" to DDRAM, and set DDRAM address to "00 H" from AC RE1,RE2=(0,0), table 1(default) RE1,RE2=(0,1), table 2 RE1,RE2=(1,0), table 3 RE1,RE2=(1,1), table 4 high byte of HCGROM code for Read Data low byte of HCGROM code for Read Data Set CGROM Code for Read Data Byte 3 Set CGROM Code for Read Data Byte 2 Set CGROM Code for Read Data Byte 1 Set CGROM Code for Read Data Byte 0 (23) Set CGRAM Address 1,0 0 0 1 AC6 AC5 AC4 AC3 AC2 AC1 AC0 set CGRAM address Execution Time Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 84
RW1097 instruction Table 4 (RE1=1, RE2=1) Instruction RE1,RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Description (1) Read display data X 1 1 Read data (2) Write display data X 1 0 Write data (3) Clear Display X 0 0 0 0 0 0 0 0 0 1 Read data into DDRAM/CGRAM/SEGRAM Write data into DDRAM/CGRAM/SEGRAM Write "20H" to DDRAM, and set DDRAM address to "00H" from AC RE1,RE2=(0,0), table 1(default) (6) Instruction Table X 0 0 0 0 0 0 1 X RE1 RE2 RE1,RE2=(0,1), table 2 Set RE1,RE2=(1,0), table 3 RE1,RE2=(1,1), table 4 Select the step-up of the internal voltage converter 00*:x7 (24) Select DC-DC 01*:x2 1,1 0 0 0 0 1 0 0 DC2 DC1 DC0 Step up 100:x3 101:x4 110:x5 (default) 111:x6 Select LCD bias 1/4 bias ~ 1/11 bias 000:1/4 bias 001:1/5 bias 010: 1/6 bias (25) Select LCD Bias 1,1 0 0 0 0 1 0 1 BS2 BS1 BS0 011:1/7 bias 100: 1/8 bias 101:1/9 bias (default) 110:1/10 bias 111:1/11 bias Execution Time Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 (26) Select Regulator Resistor (27) Select Electronic Volume Register 1,1 0 0 0 0 1 1 0 R2 R1 R0 1,1 0 0 0 1 EV5 EV4 EV3 EV2 EV1 EV0 (28) Power Control Set 1,1 0 0 1 0 0 0 (29) Frame Frequency Adjustment (30) Double Frame Frequency 1,1 0 0 1 0 0 1 1,1 0 0 SW ON VB VR VF DFR 3 DFR 2 DFR 1 DFR 0 1 0 1 1 0 0 0 1 0 0 FRR *2 0 0 0 0 0 Select Internal resistance ratio of the regulator resistor default: 100 Set the V0 output voltage electronic volume register default: 100000 control power circuit on/off default: OFF Adjustment Frame Frequency 0001(Slow) -->1111 (Fast) default:0000, FRR*2=1: frame frequency *2 FRR*2=0: frame frequency normal Note: 1.When an MPU program with Busy Flag(DB7) checking is made, 1/ 2 FOSC ( is necessary ) for executing the next instruction by the E signal after the Busy Flag ( DB7) goes to Low. 2. X Don t care Reference page 86 Reference page 86 Reference page 86 Reference page 86 Reference page 86 85
Write data and Write command execution time for all duty =3.0V~3.6V Duty Write command execution time Clear Display command execution time Write data execution time Ta:25 C Read data execution time 1/97 22 us 1.98 ms 22 us 22 us 1/81 26 us 2.38 ms 26 us 26 us 1/65 32 us 2.98 ms 32 us 32 us 1/49 43 us 3.97 ms 43 us 43 us 1/33 64 us 5.95 ms 64 us 64 us 1/17 128 us 11.9 ms 128 us 128 us 86
Description of Instruction (1) Read display data Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Read display X X 1 1 Read data data Read data from internal RAM and alter the (Address Counter) by1. After address set to read (CGRAM/DDRAM/SEGRAM) a DUMMY READ is required. There is no need to DUMMY READ for the following bytes unless a new address set instruction is issued. (2) Write display data Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Write display X X 1 0 Write data data Write data to internal RAM and Alter the (Address Counter) by 1. Each RAM address (CGRAM/DDRAM/SEGRAM ) must write 2 consecutive bytes for 16 bit data. After the second byte the address counter will add or subtract by 1 according to the entry mode set control bit. (3) Clear Display Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Clear Display 0 0 X X 0 0 0 0 0 0 0 1 Set DDRAM address counter (AC) to 00H. Cursor moves to origin. The content of DDRAM is not changed. (4) Return Home Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Return Home 0 0 0 0 0 0 0 0 0 0 1 X Set DDRAM address counter (AC) to 00H. Cursor moves to origin. The content of DDRAM is not changed. 87
(5) Entry Mode Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Entry Mode 0 0 0 0 0 0 0 0 0 1 I/D S Set Set the cursor/blink movement and display shift direction when doing write or read operation. I/D: Increment/Decrease of DDRAM address (cursor or blink) When I/D= 1 : cursor/blink moves right and DDRAM address is increased by 1. When I/D= 0 : cursor/blink moves left and DDRAM address is decrease by 1 S: Shift of entire display When DDRAM read (CGRAM read/write) operation or S= 0, shift of entire display is not performed. If S= 1 and DDRAM write operation, shift of entire display is performed according to I/D value (I/D= 1 : shift left, I/D= 0 : shift right) S I/D Description 1 1 Entire display shift left by 1 1 0 Entire display shift right by 1 (6) Instruction Table Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Instruction Table Set X X 0 0 0 0 0 0 1 X RE1 RE2 There are 4 instruction sets for RW1097, which can be assigned by setting RE1, RE2. RE1 RE2 Instruction Table 0 0 Table 1 0 1 Table 2 1 0 Table 3 1 1 Table 4 (7) Cursor or Display Shift Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Cursor or Display Shift 0 0 0 0 0 0 0 1 S/C R/L X X Instruction to move the cursor shift entire display, the content of DDRAM is not changed. S/C R/L Description AC value 0 0 Cursor moves left by 1 AC=AC-1 0 1 Cursor moves right by 1 AC=AC+1 1 0 Display shift left by 1,cursor also follows to shift AC=AC 1 1 Display shift right by 1,cursor also follows to shift AC=AC 88
(8) Function Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function Set 0 0 0 0 0 0 1 IF D C B X IF: 4/8 bit interface control bit When IF= 1 : 8-bit MPU bus interface. When IF= 0 : 4-bit MPU bus interface. D: Display ON/OFF control bit When D= 1 : Display turn on When D= 0 : Display turn off, but the display data is remained in DDRAM. C: Cursor ON/OFF control bit When C= 1 : Cursor turn on When C= 0 : Cursor turn off B: Display ON/OFF control bit When B= 1 : Cursor position blink on. Then display data in cursor position will blink. When B= 0 : Cursor position blink off. (9) Set DDRAM Address Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set DDRAM Address 0 0 0 0 1 AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set DDRAM address to address counter (AC, 7-bits), each address (CGRAM/DDRAM/SEGRAM..) must write 2 consecutive bytes for 16 bits data. (High byte-> low byte) After the second byte the address counter will add or subtract by 1 according to the entry node set control bit. 1 st line AC range (7-bit) is 00H~0BH 2 nd line AC range (7-bit) is 10H~1BH 3 rd line AC range (7-bit) is 20H~2BH 4 th line AC range (7-bit) is 30H~3BH 5 th line AC range (7-bit) is 40H~4BH 6 th line AC range (7-bit) is 50H~5BH 89
(10) Set SEGRAM Address Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set SEGRAM Address 0 0 0 0 0 1 0 0 AC3 AC2 AC1 AC0 Set DDRAM address to address counter (AC, 4-bits), each address (CGRAM/DDRAM/SEGRAM..) must write 2 consecutive bytes for 16 bits data. (High byte-> low byte) After the second byte the address counter will add or subtract by 1 according to the entry node set control bit. SEGRAM Address and Display Pattern SEGRAM Address High Byte SEGRAM Data Display Pattern Low Byte AC3 AC2 AC1 AC0 D7 D6 D5 D4 D3 D2 D1 D0 D7 D6 D5 D4 D3 D2 D1 D0 0 0 0 0 S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 0 0 0 1 S16 S17 S18 S19 S20 S21 S22 S23 S24 S25 S26 S27 S28 S29 S30 S31 0 0 1 0 S32 S33 S34 S35 S36 S37 S38 S39 S40 S41 S42 S43 S44 S45 S46 S47 0 0 1 1 S48 S49 S50 S51 S52 S53 S54 S55 S56 S57 S58 S59 S60 S61 S62 S63 0 1 0 0 S64 S65 S66 S67 S68 S69 S70 S71 S72 S73 S74 S75 S76 S77 S78 S79 0 1 0 1 S80 S81 S82 S83 S84 S85 S86 S87 S88 S89 S90 S91 S92 S93 S94 S95 0 1 1 0 S96 S97 S98 S99 S100 S101 S102 S103 S104 S105 S106 S107 S108 S109 S110 S111 0 1 1 1 S112 S113 S114 S115 S116 S117 S118 S119 S120 S121 S122 S123 S124 S125 S126 S127 1 0 0 0 S128 S129 S130 S131 S132 S133 S134 S135 S136 S137 S138 S139 S140 S141 S142 S143 1 0 0 1 S144 S145 S146 S147 S148 S149 S150 S151 S152 S153 S154 S155 S156 S157 S158 S159 1 0 1 0 S160 S161 S162 S163 S164 S165 S166 S167 S168 S169 S170 S171 S172 S173 S174 S175 1 0 1 1 S176 S177 S178 S179 S180 S181 S182 S183 S184 S185 S186 S187 S188 S189 S190 S191 1 1 0 0 X X X X X X X X X X X X X X X X 1 1 0 1 X X X X X X X X X X X X X X X X 1 1 1 0 X X X X X X X X X X X X X X X X 1 1 1 1 X X X X X X X X X X X X X X X X (11) Read Busy Flag and Address Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Read Busy Flag and Address X X 0 1 BF AC6 AC5 AC4 AC3 AC2 AC1 AC0 Read busy flag (BF) can check whether internal operation is finished. At the same time the value of address counter. 90
(12) Power Down Mode Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Power Down Mode 0 1 0 0 0 0 0 0 0 0 1 PD Power down mode enable bit set instruction When PD= 0 : Power down mode becomes disabled. When PD= 1 : Power down mode enable. When power down is enable, it makes RW1097 suppress current consumption except the current needed for data storage by executing next 1. All COM/SEG output is. 2. Turn off analog circuit. This instruction can be used as power sleep mode. (13) COM and SEG Scan Direction Select Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display Control Set 0 1 0 0 0 0 0 0 0 1 SHL BID BID: Data Shift Direction of SEGMENT When BID = "Low", segment data shift direction is set to normal order from SEG0 to SEG191 When BID = "High", segment data shift direction is set to reverse from SEG191 to SEG0. By using this instruction, the efficiency of application board area can be raised. SHL: COMMON scan reverse When SHL = "Low": COMMON scan direction is set to normal order from COM0 to COMn When SHL = "High": COMMON scan direction is set to reverse from COMn to COM0 6-line display, n=95, 5-line display, n=79, 4-line display, n=63, 3-line display, n=47, 2-line display, n=31, 1-line display, n=15 91
(14) Cursor Blink and Display Reverse Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Cursor Blink and Display Reverse Set 0 0 0 0 0 0 1 0 0 0 REV B/W B/W: Underscore cursor blinking enable bit When B/W= 1 : underscore cursor blinking at the cursor position is set. When B/W= 0 : underscore cursor blinking disable. REV: Display reverse When REV= 1 : Display reverse enable, all the display white dots become black and black dots become white. When REV= 0 : Display reverse disable. (15) Display Shift Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display Shift Set 0 1 0 0 0 1 DS6 DS5 DS4 DS3 DS2 DS1 This instruction select shifted to be according to each line mode in display shift right/left instruction. DS6~DS1 indicate each line to be shifted and each shift is performed individually in each line. (16) Set Data Length for 3-SPI Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set Data Length for 3-SPI 0 1 0 0 1 SD6 SD5 SD4 SD3 SD2 SD1 SD0 In 3line SPI mode, set data length command indicates the length of data which, are going to be received by RW1097. User should set data length before display data sent. The table 6 shows how SD bits set the data length. Table 6. set data length according to SD bits SD6 SD5 SD4 SD3 SD2 SD1 SD0 Function 0 0 0 0 0 0 0 Followed by 1 data write 0 0 0 0 0 0 1 Followed by 2data write 0 0 0 0 0 1 0 Followed by 3data write 0 0 0 0 0 1 1 Followed by 4 data write : : : : : : : : 1 1 1 1 1 1 1 Followed by 256 data write 92
(17) Set HCGROM Code for Read Data Byte 1 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set HCGROM Code for Read Data Byte 1 1 0 0 0 0 0 1 0 HC7 HC6 HC5 HC4 (18) Set HCGROM Code for Read Data Byte 0 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set HCGROM Code for Read Data Byte 0 1 0 0 0 0 0 1 1 HC3 HC2 HC1 HC0 Set HCGROM address by writing relative HCGROM code. This instruction makes HCGROM data content available from read data command. For example: Reading the data content of character A in HCGROM (font code: 31H). 1. Set HCGROM address byte 1 to 3 (instruction code : 23 H). 2. Set HCGROM address byte 0 to 1 (instruction code: 31 H). 3. Read 16 consecutive bytes for 16 x 8 bits data. 93
(19) Set CGROM Code for Read Data Byte 3 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set CGROM Address Byte 3 1 0 0 0 0 1 0 0 C15 C14 C13 C12 (20) Set CGROM Code for Read Data Byte 2 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set CGROM Address Byte 2 1 0 0 0 0 1 0 1 C11 C10 C9 C8 (21) Set CGROM Code for Read Data Byte 1 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set CGROM Address Byte 1 1 0 0 0 0 1 1 0 C7 C6 C5 C4 (22) Set CGROM Code for Read Data Byte 0 Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set CGROM Address Byte 0 1 0 0 0 0 1 1 1 C3 C2 C1 C0 Set CGROM address by writing relative CGROM code. This instruction makes CGOM data content available from read data command For example: Reading the data content of character 芯 in CGROM (font code:d0beh). 1. Set CGROM address byte 3 to D (instruction code: 4DH) 2. Set CGROM address byte 2 to 0 (instruction code: 50H) 3. Set CGROM address byte 1 to B (instruction code: 6BH) 4. Set CGROM address byte 0 to E (instruction code: 7EH) 5. Read 32 consecutive for 16 x 16-bit data (high byte -> low byte) 94
(23) Set CGRAM Address Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Set CGRAM Address Byte 1 1 0 0 0 1 AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set CGRAM address bit 10~ bit4 to address counter (AC,7-bit), Each address (CGRAM,DDRAM,SEGRAM) must write 2 consecutive bytes for 16 but data ( high byte->low byte). After the second byte the address counter will add or subtract by 1 according to the entry mode set control bit. RW1097 provides 72 sets 16x16 bit user defined characters area (CGRAM), user can only set to the initial address line of each character through Set CGRAM Address command. (24) Select DC-DC Set up Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Select DC-DC Set up 1 1 0 0 0 0 1 0 0 DC2 DC1 DC0 Selects one of 7 DC-DC set up to reduce the power consumption by this instruction. DC2 DC1 DC0 Selected DC-DC converter circuit 0 1 * 2 times boosting circuit 1 0 0 3 times boosting circuit 1 0 1 4 times boosting circuit 1 1 0 5 times boosting circuit(default) 1 1 1 6 times boosting circuit 0 0 * 7 times boosting circuit. (25) Select LCD Bias Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Select LCD Bias 1 1 0 0 0 0 1 0 1 BS2 BS1 BS0 Select LCD bias ratio of the voltage required for driving the LCD. BS2 BS1 BS0 LCD bias 0 0 0 1/4 0 0 1 1/5 0 1 0 1/6 0 1 1 1/7 1 0 0 1/8 1 0 1 1/9(Default) 1 1 0 1/10 1 1 1 1/11 95
(26) Select Regulator Resistor Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Select Regulator Resistor 1 1 0 0 0 0 1 1 0 R2 R1 R0 Select resistance ratio of the internal resistor used in the internal voltage regulator. R2 R1 R0 1+(Rb/Ra) 0 0 0 2.6 0 0 1 3.4 0 1 0 4.2 0 1 1 5.0 1 0 0 5.8(Default) 1 0 1 6.6 1 1 0 7.4 1 1 1 8.3 (27) Select Electronic Volume Register Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Select Electronic Volume Register 1 1 0 0 0 1 EV5 EV4 EV3 EV2 EV1 EV0 This instruction contents of reference voltage register. EV5 EV4 EV3 EV2 EV1 EV0 Reference voltage parameter (α) 0 0 0 0 0 0 63 0 0 0 0 0 1 62 : : : : : : : 1 0 0 0 0 0 31 (Default) : : : : : : : 1 1 1 1 1 0 1 1 1 1 1 1 1 0 96
(28) Power Control Set Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Power Control Set 1 1 0 0 1 0 0 0 SWON VB VR VF Analog circuit booster, regulator, follower on/off control VB=1: capacitor type booster on VB=0: capacitor type booster off VR=1: internal regulator on VR=0: internal regulator off VR=1: internal follower on VR=0: internal follower off SWON=1: switching regulator on SWON=0: switching regulator off RW1097 has built-in inductor type regulator circuit for big current drive application, when internal switching regulator is used, please combine with internal regulator command together. Do not turn on capacitor type and inductor type booster in the same time. Inductor Type regulator Circuit ON/OFF: Turn on the internal regulator (VR=1) and switching regulator on (SWON=1) Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Power Control Set 1 1 0 0 1 0 0 0 1 (SWON) 0 (VB) 1 (VR) VF 97
(29) Frame Frequency Adjustment Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Frame Frequency Adjustment 1 1 0 0 1 0 0 1 DFR3 DFR2 DFR1 DFR0 DFR3~DFR0: Frame Frequency adjustment from 0000 (slow) ~ 1111 (fast) DFR3 DFR2 DFR1 DFR0 Frame Frequency adjustment table: (+/- 15%) Frame Frequency (Hz) 1/97 Duty 1/81 Duty 1/65 Duty 1/49 Duty 1/33 Duty 1/17 Duty 0 0 0 0 86(default) 79(default) 82(default) 85(default) 81(default) 78(default) 0 0 0 1 66 60 61 66 61 59 0 0 1 0 67 61 62 67 62 60 0 0 1 1 72 65 67 71 66 64 0 1 0 0 75 66 70 74 69 67 0 1 0 1 79 72 75 78 73 71 0 1 1 0 81 74 76 80 75 73 0 1 1 1 86 79 83 86 81 79 1 0 0 0 93 86 89 93 87 85 1 0 0 1 94 88 92 94 90 88 1 0 1 0 99 94 97 99 96 94 1 0 1 1 105 99 104 104 103 100 1 1 0 0 111 105 112 110 111 108 1 1 0 1 119 115 122 119 121 116 1 1 1 0 124 119 128 124 125 122 1 1 1 1 128 128 133 127 132 128 98
(30) Double Frame Frequency Instruction RE1 RE2 A0 RW DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Double Frame Frequency 1 1 0 0 1 0 1 1 0 0 0 1 0 0 FRR*2 0 0 0 0 0 FRR*2=1: frame frequency *2 FRR*2=0: frame frequency normal DFR3 DFR2 DFR1 DFR0 Double Frame Frequency (Hz) 1/97 Duty 1/81 Duty 1/65 Duty 1/49 Duty 1/33 Duty 1/17 Duty 0 0 0 0 172(default) 158(default) 164(default) 170(default) 162(default) 156(default) 0 0 0 1 132 120 122 132 122 118 0 0 1 0 134 122 124 134 124 120 0 0 1 1 144 130 134 142 132 128 0 1 0 0 150 132 140 148 138 134 0 1 0 1 158 144 150 156 146 142 0 1 1 0 162 148 152 160 150 146 0 1 1 1 172 158 166 172 162 158 1 0 0 0 186 172 178 186 172 170 1 0 0 1 188 176 184 188 180 176 1 0 1 0 198 188 194 198 192 188 1 0 1 1 210 198 208 208 206 200 1 1 0 0 222 210 224 220 222 216 1 1 0 1 238 230 244 238 242 232 1 1 1 0 248 128 256 248 250 244 1 1 1 1 256 256 266 254 264 256 99
LCD Initialization Setup Note: After RW1097 is reset, the voltage level of the LCD driving output pins SEG and COM is 8-bit Interface mode Duty Write command execution time Clear Display command execution time 1/97 22 us 1.98 ms 1/81 26 us 2.38 ms 1/65 32 us 2.98 ms 1/49 43 us 3.97 ms 1/33 64 us 5.95 ms 1/17 128 us 11.9 ms 100
4-bit Interface mode: Duty Write command execution time Clear Display command execution time 1/97 22 us 1.98 ms 1/81 26 us 2.38 ms 1/65 32 us 2.98 ms 1/49 43 us 3.97 ms 1/33 64 us 5.95 ms 1/17 128 us 11.9 ms 101
3/4-SPI and IIC Interface mode: Duty Write command execution time Clear Display command execution time 1/97 22 us 1.98 ms 1/81 26 us 2.38 ms 1/65 32 us 2.98 ms 1/49 43 us 3.97 ms 1/33 64 us 5.95 ms 1/17 128 us 11.9 ms 102
Precautions on Turning off the Power <Turning the power ( - ) off> LCD Reset pin input L (The LCD powers (, V0, V1~V4) are off.) Power OFF ( - ) Observe tl > th. When tl < th, an irregular display may occur. For tl, make the power ( - ) falling characteristics longer or consider any other method. th is determined according to the external capacity C2 (smoothing capacity of V4 to V0) and the driver s discharging capacity. <Reference Data> V0 voltage falling (discharge) time (th) after the process of operation reset. 103