Vishay Intertechnology, Inc. Industrial / Power www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components
Industrial / Power 4 / 5 5 6 The Engineer s Toolbox highlights, by market application, some innovative components Vishay manufactures that help design engineers develop superior end products. We recognize that offering unique component solutions helps improve the performance of next-generation devices, overcome technical barriers, and create new markets. More information on the Engineer s Toolbox, including product datasheet links, can be found at www.vishay.com/ref/et2. For inquiries, please contact your local sales representative.
/ 89 THE VISHAY ADVANTAGE. 3
MFU Series 038 RSU 293D Thin Film Chip Fuses Rated current from 0.5 A to 6.3 A Precise fusing characteristics UL recognized and IEC approval available Case sizes: 0402 to 1206 Standard Miniature Radial Aluminum Capacitor Radial leads, cylindrical aluminum case, insulated with a blue sleeve Miniaturized, high CV-product per unit volume; sizes 5 mm x 11 mm up to 18 mm x 40 mm Up to 3,500 h at 85 ºC Capacitance range from 0.1 µf to 22 000 µf; voltages from 6.3 V to 100 V SMD Tantalum Molded Chip Capacitor TANTAMOUNT, standard industrial grade Molded case available in six case codes Terminations: 100 % matte tin, standard, tin/lead available Compatible with high volume automatic pick and place equipment INDUCTORS IDCP-2218, NON-LINEAR NTCS0603E3 MOSFETs 2N7002K MC Series High-Current Surface-Mount Inductor High energy storage and low resistance Small size Low cost RoHS-compliant Glass-Protected SMD 0603 NTC Thermistors Tolerance on R 25 down to 1 %, and on B 25/85 down to 1 % High operating temperature up to 150 C Single, 60 V N-Channel Power MOSFET 60 V n-channel technology Maximum current of 0.3 A SOT-23 package Maximum on-resistance of 2 Ω at V GS = 10 V Thin Film Chip Resistors CECC approved according to EN 140401-801 Available from 1R to 10M Low TCR down to ± 10 ppm/k, tight tolerance down to 0.1 % High pulse load robustness TSAL6100 VEMD2020X01 DIODES MMSZ5258 VO3120 High-Power Infrared Emitting Diode High Sensitivity Infrared PIN Photodiode Plastic Packaged 5 % Zener Diode 2.5 A Output Current Optoisolated IGBT/MOSFET Gate Driver 130 mw/sr at I F = 100 ma T-1¾ (5 mm) package Angle of half intensity of ± 10 Peak intensity of 940 nm Reverse light current of 12 µa with E e = 1 mw/cm 2 Angle of half sensitivity of ± 15 Gullwing and reverse gullwing packages SOP-4 package Miniature SOD-123 package AEC-Q101 qualified Zener voltage of 3.3 V to 75 V 2.5 A peak driver current 5300 V isolation voltage 25 kv/µs CMR 110 C operating temperature 90 4
, NON-LINEAR NTCLE305E4 NTC Micro Chip Sensor Insulated Leads Flexible insulated leads for special mounting or assembly Exceptional withstanding in thermal shocks Miniature sized very fast reacting with response time of less than 3 s MOSFETs IRFR1N60APBF Single 600 V N-Channel Power MOSFET Maximum current of 1.4 A DPAK package Maximum on-resistance of 7 Ω at V GS = 10 V Typical gate charge of 9.3 nc at V GS = 10 V / GAS VSMY2850G Surflight High-Intensity Infrared Emitter 100 mw/sr at I F = 100 ma; radiant power of 55 mw Gullwing and reverse gullwing packages Tight half angle of intensity of ± 10 Peak intensity at 850 nm BPV22NF High-Speed, Side View PIN Photodiode Angle of half sensitivity: ϕ = ± 60 High radiant sensitivity of 85 µa at 1 mw/cm 2 Daylight blocking filter matched with 870 nm to 950 nm emitters Wavelength of peak sensitivity 950 nm MKP1841 AC and Pulse Double Metalized MKP Capacitor Low contact resistance, low loss dielectric High pulse strength (up to 20 300 V/µs) Rated capacitance from 470 pf up to 6.8 µf Mini version available (MKP1841M) ALUMINUM 196 DLC Double-Layer Capacitors High charge density, alternative product to rechargeable backup batteries Radial leads, cylindrical case, available in both vertical and low-profile versions Unlimited charge/discharge cycles, no charge-discharge control circuitry necessary 0.047 F to 1.0 F; 5.5 V and 6.3 V, up to - 25 C to + 85 C MC Series Thin Film Chip Resistors CECC approved according to EN 140401-801 Available from 1R to 10M Low TCR down to ± 10 ppm/k, tight tolerance down to 0.1 % High pulse load robustness THE VISHAY ADVANTAGE. RECTIFIERS EGF1T 1 A, 1300 V Ultrafast Rectifier in GF1 S UPERECTIFIER technology Ultrafast reverse recovery time Ideal for automated placement RoHS-compliant ICs DG444B/DG445B High-Performance Quad SPST CMOS Analog Switches Wide operation voltage range supports both single and dual power operation Low and flat switch on-resistance: 45 Ω Low leakage, parasitic capacitance, and charge injection for precision switching Fast switching action: t on = 120 ns 91 5
INDUCTORS IMS05 Axial Leaded Molded, Shielded Inductor Wide inductance range in small package Flame retardant coating Electromagnetic shield Epoxy molded construction provides superior moisture protection VSH 1000 MOSFET http://www.vishay.com VTF Precision Single-in-Line Resistor Network Wide variety of standard off-the-shelfs standards 3 to 10 pin sizes 100 mil lead-spacing standard Tight ratio tolerances, ± 0.02 %, and close TC tracking 2 ppm Custom circuits available MOSFETs Si6993DQ Dual 30 V P-Channel Power MOSFET 30 V p-channel technology Maximum current of 3.6 A TSSOP-8 package Maximum on-resistance down to 0.031 Ω MOSFET IC /SCR 173D Solid Electrolyte TANTALEX Capacitor Miniature axial leaded capacitors available in five case sizes Precision molded in gold colored, flame retardant, thermosetting epoxy resin Laser marked for improved legibility, and tapered end on positive terminal Standard orders are taped and reeled; under 500 pieces are ammo packed 6 TFBS4711 Infrared Transceiver for Wireless Communication Low profile with height of 1.9 mm in side view Link distance from 0 to 1 m Data rate of 115 kbit/s (SIR) Side or top view surface-mount package Split power supply allows emitter to be driven from separate power supply from receiver 92
Vishay Intertechnology, Inc. BUILD VISHAY into your DESIGN www.vishay.com VMN-MS6792-1304-INDI