サニタリー継手

Size: px
Start display at page:

Download "サニタリー継手"

Transcription

1

2

3 FITTINGS

4 The inserted product photograph is made by 3DCG, and there are little differ things actually. Please refer us without reserve if you have any questions.

5 The contents of this catalog are subject to change without notice for technical improvement.

6

7 TS TPS 90E-W 45E-W 18ND-W TEE-W TEEV-W TEEX-W TEEVX-W CF-W CF-W CF-E CF-WX CF-WXE CF- CP3K CPK CPD GS-C GS-C E-C E-C-W 45E-C 45E-C-W 18ND-C 18ND-C-W TEE-3C TEE-CCW TEE-CWC TEEX-3C TEEV-WCW TEEVX-WCW TEEV-3C TEEVX-3C CROS-4C RDC-C RDE-C RDC-W-C RDE-W-C RDC-C-W RDE-C-W HSD-C HSD-CX CF-RC THD-C THSC-C JFD-C M-W M-W NR-W NR-W M-E NR-E GS- NH-S() NH-S() NR VSF-KUMITTE VSF-T VSF-S VSF-P GS--VSF T-VSF EXPJ 3-D-UN DIN-D-UN PR-C PR-JFD PR-M PR-VSF- PR-NO PR-VSF-T PR-NH PR-VSF-T PHG-M PHG- PHG-S CSP STD-S SD3 PN-M10/M1 PSP SP-R TEX CK-M CK- CK-C SP-H-S SP-H- J-1 J-16 J-0 J-4 NR NR M E-M E-NH-S() E-1NH-S() E-M-W E--W 45E-M 45E-NH-S() 45E-1NH-S() 45E-M-W 45E--W 18ND-M 18ND-NH-S() 18ND-1NH-S() 18ND-M-W 18ND--W TEE-3M TEE-NOO-S() TEE-ONO-S() TEE-NNO-S() TEE-NON-S() TEE-3NH-S() CROS-4M CROS-4NH-S() RDC--M RDE--M RDC-M RDE-M HSD-M HSD- THD-M THD-NH-S() JFD-M JFD-NH-S() TEEH-W TND-W CROS-W HSD-W RDC-W RDE-W THD-W JFD-W

8

9 PIPES,FITTING FOR WEDING END

10 The Sanitary Pipes apply to JIS-G3447 Stainless Steel Sanitary Pipes. The Union fittings are based on ISO standard. Specifications Materials : SUS304, SUS316, SUS316 (but,815 is only SUS316.) Surface finish Standard : baff finish (#30 to #400) for internal surface (Ra 1.0μm) baff finish (#30 to #400) for external surface (Ra.5μm) Option : Pickling finish Internal surface finish Electro polishing Pickling finish Electro polishing External surface finish Stainless beads shot pplicable Standards Sanitary Pipes Detail form dimensions JIS-G Face-to-Face dimensions (Center-to-Face dimensions) JIS-G Small Dia. Sanitary Pipes JIS-G JIS-G Elbows, Tees OSS OSS Clamp Union Fittings ISO/OSS ISO/OSS Screwed Union Fittings Flange Union Fittings Other Special Fittings Piping Supports and Tools ISO/OSS OSS / JIS OSS OSS ISO/OSS OSS / JIS-10 OSS JIS-G3447 Stainless Steel Sanitary Pipes ISO International organaization for Standardization OSS Osaka Sanitary Standards JIS-G3459 Stainless Steel Pipes JIS-10 asic Dimensions of Ferrous Material Pipe Flanges Gasket (Ferrule,-type)kinds Gaskets for Sanitary Fittings are available in a number of alternative materials : NR, silicone rubber, EPDM, fluoro-rubber, (FKM)PTFE, and "Sani Clean" (PTFE + EPDM). The characteristics of each gasket material are briefly described in the following paragraphs to help you select the gasket material optimum for your application. NR (black) Nitryl rubber NR gaskets are used widely for flood processing in general. However, they should not be used in a pipeline that feeds high-concentration acetic acid or an ester compound or in any environment where it can be exposed to steam. The fluid temperature should preferably be not higher than 80 C. NR gaskets are execllent in oil resistance and thus suitable for pipelines that feed animal/vegetable oil. Silicone rubber (white) Silicone rubber is exellent in heat resistance but poor in steam resistance. Generaly since silicone rubber gaskets are poor in mechanical strength, they require particular attention when used in conjunction with JIS flanges. Silicone rubber gaskets exhibit relatively high resistance to weak acid and alkali solutions.

11 EPDM (black) ethylene propylene rubber EPDM gaskets are exellent in heat resistance and exhibit high resistance to water, hot water, acid and alkali solutions, but remarkably poor in oil resistance. Therefore, they should not be used in a pipeline that feeds food containing oil/fat. The fluid temperature should preferably be not higher than 10 C. FKM (black) fluoro-rubber FKM exhibits high resistance to heat, oil, and chemicals, but is poor in resistance to steam and acetic acid. The fluid temperature should preferably be not higher than 140 C. Kalrez (black) perfluoroelastomer Kalrez is a unique elastomer with a chemical resistance equal to Teflon. with higher heat resistance than that of conventional silicone and fluororubber and with elasticity equal to that of rubber.(there is only ferrule type gasket.) Note that, as the adoption criteria for each of these gasket materials, Osaka Sanitary uses materials tests and elution tests specified in Food and dditives Standards (Notice No.370 of 1959 issued by the Ministry of Health and Welfare of Japan), rticle 3-D-"Instruments, Containers and Packages Made of Synthetic Resin" and 3-D-3(1) For ordering

12 Type TS Type TPS 4000 t OD 815: right annealed () finish for internal surface Ra0.5μm #30#400 buff abrasive finish for external surface Ra.5μm Only SUS316 Type 90E-W Type 45E-W t OD Only SUS316 OD t Only SUS316

13 Type 18ND-W OD t Type TEE-W Type TEEV-W t t t Only SUS316 t OD OD OD t Only SUS316 t OD Photo is 3DCG.

14 Type TEEX-W OD t t1 OD1 Only SUS316 Type TEEVX-W OD t t1 OD1 Only SUS316

15 Type TEEH-W OD t E Only SUS316 C t1 OD1 E Type TND-W t OD Type CROS-W t OD Only SUS316 Type HSD-W OD1 1 OD Only SUS316 Photo is 3DCG.

16 Type RDC-W t1 OD1 t OD Size is same to the below chart Type RDE-W t1 OD1 t OD Only SUS316

17 Type THD-W Type JFD-W Only SUS316 1 OD 1 OD Flange Photo is 3DCG.

18

19 ISO FERRUE UNION FITTINGS

20 Welded Clamp Union Expanded Clamp Union Clamp and Gasket Ferrule for Welding Clamp and Gasket Ferrule for Expanding ISO standard clamped union joints are assembled by sand- wiching and clamping the gasket between the ferrule. When tightened, the union joints makes the inner surface of pipe and the seal surface come closely into contact. The welded clamped union is joined to the sanitary pipe by argon arc TIG welding. Inside and outside diameters of the portion to be welded conform to the inside and outside diameters of the JIS-G344 stainless steel sanitary pipe. The expanded clamped union is used to expand a pipe by a tube expander for subsequent joining of the joint. Working Pressure welded type 1.0MPa or less Expanded type 0.MPa or less

21 Type CF-W OD Only SUS316 Type CF-W OD Type CF-E D C Only SUS304 Photo is 3DCG.

22 Type CF-WX 1 OD Only SUS316 Only SUS304 Type CF-WXE 1 OD Type CF- 11 OD Only SUS316

23 Type CP3K D1 C Type CPK D1 C Type CPD D1 C Photo is 3DCG.

24 Major feafures What is the Kalrez? Kalrez is a unique elastomer with a chemical resistance equal to that of the Teflon. with higher heat resistance than that of conventional silicone and fluororubber and with elasticity equal to that of rubber. Solvent Resistance of Fluororubber and Kalrez Kalrez Comparison with other elastoners Excellent heat resistance and chemicar resistance Silicone rubber Fluororubber Heat resistance Superior Nitrile rubber Chemical resistance General bar perfluoroelastomer Superior Kalrez Extract Properties

25 Type GS-C Type GS-C Small dia The standard sk. It is not. y materials, the colors are different. y materials, the colors are different. Specify material. 6.4 C 5.5 C C Photo is 3DCG.

26 Type E-C Only SUS316 Type E-C-W Type 45E-C OD t Only SUS316 Only SUS316

27 Type 45E-C-W OD t Only SUS316 Type 18ND-C Type 18ND-C-W Type TEE-3C t OD 1 Only SUS316 Photo is 3DCG.

28 Type TEE-CCW Type TEE-CWC OD OD Type TEEX-3C 1 1 Only SUS316 Type TEEV-WCW OD

29 Type TEEVX-WCW 1 Only SUS316 Type TEEV-3C Photo is 3DCG. Only SUS316

30 Type TEEVX-3C 1 1 Only SUS316 Type CROS-4C

31 Type RDC-C Type RDE-C 1 Type RDC-C 1 Type RDE-C 1 1 ll SUS316 Photo is 3DCG.

32 Type RDC-W-C Type RDE-W-C OD OD t t 1 1 Type RDC-C-W Type RDE-C-W t OD 1 t OD 1

33 Type HSD-C 1 OD Only SUS316 Type HSD-CX Type CF-RC 1 4 OD SUS RC D SUS316 Photo is 3DCG.

34 Type THD-C SUS316 SUS

35 Type THSC-C Type JFD-C Flange 1 Photo is 3DCG.

36

37 ISO SCREWED UNION FITTINGS

38 Weld Male Union Expanded Male Union Hexagon Nut Male for Welding Gasket iner for Welding Hexagon Nut Male for Expanding Gasket iner for Expanding ISO standard threaded union joints use CME threads. When tightened, the union joints makes the inner surface of pipe and the seal surface come closely into contact. The welded threaded union is joined to the sanitary pipe by argo arc TIG welding. Inside and outside diameters of the portion to be welded conform to the inside and outside diameters of the JIS-G344 stainless steel sanitary pipe. THe expanded threaded union is used to expand a pipe by a tube expander for subquent joining of the joint. Working Pressure Welded type : 1.0MPa or less Expanded type : 0.MPa or less The tube expanded to P.-57.

39 Type M-W OD Type M-W OD Type NR-W OD Type NR-W Type M-E The inside groove isnt the groove for the screw. OD OD Photo is 3DCG.

40 Type NR-E Type GS- The inside groove isnt the groove for the screw. t OD Specify material. Type NH-S/NH- Type NH-S/NH- C

41 Type NR Type NR OD 30 OD Type NR Type M Photo is 3DCG.

42 Type E-M Type E-NH-S/E-NH- Type E-1NH-S/E-1NH- Type E-M-W Type E--W t OD t OD

43 Type 45E-M Type 45E-NH-S/45E-NH- Type 45E-1NH-S/45E-1NH- Type 45E-M-W Type 45E--W OD t t OD Photo is 3DCG.

44 Type 18ND-M Type 18ND-NH-S/18ND-NH- Type 18ND-1NH-S/18ND-1NH- Type 18ND-M-W OD Type 18ND--W t 1 OD t 1

45 Type TEE-3M Type TEE-NOO-S/TEE-NOO- Type TEE-ONO-S/TEE-ONO- Type TEE-NNO-S/TEE-NNO- Type TEE-NON-S/TEE-NON- Photo is 3DCG.

46 Type TEE-3NH-S/TEE-3NH- Type CROS-4M Type CROS-4NH-S/CROS-4NH- Type RDC--M 1

47 Type RDE--M 1 Type RDC-M 1 Type RDE-M 1 Photo is 3DCG.

48 Type HSD-M 1 OD1 OD Type HSD- 1 Type THD-M OD1 OD 1

49 Type THD-NH-S/THD-NH- Type JFD-M Type JFD-NH-S/JFD-NH- Flange 1 1 Flange 1 Photo is 3DCG.

50

51 FNGE UNION FITTINGS

52 Sanitary Flange Union Hexagon Nut Fixed Flange oose Flange Hexagon olt ap Joint Gasket pressure used Free from fluid collection at the gasket portion unlike JIS flanges. oose flanges allow piping without bolt hole alignment. High strength to piping expansion / shrikage and deflection.

53 Type VSF-KUMITTE Type VSF-T OD Type VSF-S t t Only SUS304 Type VSF-P OD Photo is 3DCG.

54 Type GS--VSF t OD Type T-VSF Specify material. d Photo is 3DCG.

55 FITTINGS for SPECI USE

56 Type EXPJ Photo is 3DCG.

57 Type 3-D-UN OD Type DIN-D-UN OD Photo is 3DCG.

58

59 PIPES WITH FITTINGS

60 Our ssociation also offers the secondary fabrication of pipes, joints and others. We manufacture such high quality products at our factories which are not fully responded at the local factories. We offer the same manufacturing quality of products as our joint products. The following are some example of our products. If you should need any further information regarding our products, please do not hesitate to contact our ssociation. Curved pipe (R=radius) l Different R is applied for production depending its size. l ngle l Interplanar spacing ( R Curve End, Straight Pipes: 00 etc) Joints (Plain end, Ferrule, etc) ranch pipes (Header pipes, Y-branch pipes) Prefabricated Piping We tailor the fabrication of pipes to your requirements with various combinations of pipes, elbows, reducers, ferrules, screws and others. The Pipe with Fittings can be manufactured to meet your specifications. For Ordering Please inform us those items below. 1Type Material 3Nominal size and Dimensions " " 4Internal and External surface finish 5Quantity

61 Type PR-C Type PR-JFD Type PR-M Type PR-VSF- Photo is 3DCG.

62 Type PR-NO Type PR-VSF-T Type PR-NH Type PR-VSF-T Photo is 3DCG.

63 PIPING SUPPORT ND TOOS

64 Type PHG-M Type PHG- Type PHG-S Type CSP C M10 19 D 19 C 1 C M8 D 19 C 19 C 19 C M1 D

65 Type STD-S SD Type PN-M10 / Type PN-M1 1 5 Type PSP M10M Type SP-R Photo is 3DCG.

66 Type TEX Type CK-M CK- CK-C C C C Type SP-H-S, SP-H- luminum Photo is 3DCG.

67 Type J d Photo is 3DCG.

68

69 TECHNIC INFORMTION

70 Stainless Steel Sanitary Pipes-1994 Stainless Steel Pipes Sanitary Standards(International ssociation of Milk,Food and Environmental Sanitarians,U.S public Health Service) International Organization for Standadization DIN Deutsches Insitut fur Nonmung(GERMNY)

71

72

73 Sanitary Pipe Size Selection and Optimum Flow Rate The pipe size optimum for a process pipeline is dependent on the relationship between the following factors : Pump capacity Pipe pressure loss In sanitary piping, the cleanability of the pipeline serves as another important factor. The following are typical requirements for implementing sufficient cleanability : The flow velocity must be 0.6m/sec or higher (to prevent retention of air in the upper portion of the pipe interior). The flow rate must be such that turbulent flow is formed. Table 1 shows recommended flow rate ranges and other data useful for size selection. Note 1. When selecting the optimum pipe size by flow velocity (flow rate), make sure that the CIP pump capacity is large enough to compensate for the total pressure loss in the process pipeline subject to CIP. Note. s a rough guideline, it is preferable to select a pipe size whose pressure loss is approximately Pa for small-diameter pipes or not larger than Pa for medium- to large-size-pipes.

74 Sanitary Pipe Head osses s 3.5 s s Flow Rate s.0 s 1.5 s s Pipe Run-ength of Fittings(m) Friction Head oss meter of Pipe 1mmHO= Pa 1kPa=10 3 Pa 1MPa=10 6 Pa

75 Piping Gradient pipeline laid horizontally should preferably have a slight gradient so that fluid can be discharged by gravity. Generally, a practicable gradient should be selected from the range of 1/75 to 1/150. Piping Support Pitch Piping supports are used to prevent pipe deflection and excessive tension of fittings to protect apparatus. lthough the optimum support pitch is dependent on the layout, refer to the following table for the support pitch for straight pipelines. l l Thermal Expansion/Shrinkage of Pipe Thermal expansion/shrinkage of a pipe is given by the following formula. l l l l lpipe expansion/shrinkage (mm) Pipe material's linear expansion coefficient (1/) SUS304, SUS316 variation in temperature (, deg) l Initial length of pipe (mm)

76 Recommended Piping Pitch This standard applies to the pitch between parallel pipelines that are each joined by use of Screwed union fittings, Ferrule union fittings, Sanitary flange union fittings, and JIS 10K flange union fittings unit:mm This standard applies to the pitch between parallel pipelines that are welding without any fittings unit:mm Remarks 1For large pipe sizes that are not listed in the table, determine the piping pitch using the following formula. Piping pitch = (arger-size pipe's flange OD + smaller-size pipe OD) + 5 (mm) For heat insulated pipeline, add the insulator thickness to the dimension specified in the table. 3Do not apply this standard where the fittings of the adjacent pipelines are aligned with each other.

77 The table to the right shows data for calculation of yield pressure of the welded ferrule or ferrule gasket which is normally assembled by various size of clamps. Use these data only as the reference data because conditions such as the weight of equipment and piping stress applied to the clamped union are not considered s 1 s, 1.5 s 3 s, s 1.5 s.5 s (MPa) s 3.5 s 6.5 s s 5.5 s s, 1.5 s, 3 s 1.5 s,.5 s, 4.5 s (MPa) s 3.5 s 00 3 s, 6.5 s 4.5 s s 1 s, 1.5 s 1.5 s,.5 s 5.5 s (MPa)

78 , (MPa) , (MPa)

79 Dimension of Pipe Flanges for 5K0.49MPa Dimension of Pipe Flanges for 10K0.98MPa t Nom.size Pipes O.D Flange O.D Except- Gray Iron Gray Iron (7545) (8050) f g Clearance Holes Picth Quantity Dia c h () 4() olt size M 10 M 10 M 10 M 10 M 1 M 1 M 1 M 1 M 16 M 16 M 16 M 16 M 16 M 0 M 0 M 0 M 0 M 0 M M Nom.size Pipes O.D Flange O.D Except- Gray Iron t Gray Iron f g Clearance Holes Picth Quantity Dia c h olt size M 1 M 1 M 1 M 16 M 16 M 16 M 16 M 16 M 16 M 16 M 16 M 0 M 0 M 0 M 0 M 0 M M M M 4 Dimension of Pipe Flanges for 16K1.57MPa Dimension of Pipe Flanges for 0K1.96MPa Nom.size Pipes O.D Flange O.D Except- Gray Iron t Gray Iron f g Clearance Holes Picth Quantity Dia c h olt size Nom.size Pipes O.D Flange O.D Except- Gray Iron t Gray Iron f g Clearance Holes Picth Quantity Dia c h olt size M 1 M 1 M 1 M 16 M 16 M 16 M 16 M 16 M 0 M 0 M 0 M M M M 4 M 4 M 30 M M 1 M 1 M 1 M 16 M 16 M 16 M 16 M 16 M 0 M 0 M 0 M M M M 4 M 4 M 30 M 30

80 {Gravity conversion rate} pressure Pa kpa MPa bar kgf/cm atm mmho mmhg Torr force N dyn kgf viscosity Pas cp P stress thermal conductivity coefficient on heat transfer specific heat capacity Pa N/m W/(mK) W/(m K) J/(kgK) MPa N/mm kgf/mm kgf/cm kcal/(hm) kcal/(hm ) kcal/(kg) cal/(g) power work, energy kineniatic viscosity W J m /s kgfm/s kwh cst PS kgfm St kcal/h kcal

81

82

83

84

…h…L…–…†…fi…g1

…h…L…–…†…fi…g1 SANITARY FITTINGS TOTAL CATALOG 2 TOTAL CATALOG TOTAL CATALOG 3 Kyowa Stianless co.ltd is first product company of Sanitary pipe for Stainless(JIS G3447) for Certification of Making JIS system injapan.

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T box number basic type Standard Specification Material of Enclosure Material of F 01 Flameproof Junction Box Junction Box Series Our junction boxes are designed and manufactured based on the Recommended Practices for Explosion-Protected Electrical Installations in General Industries

More information

1 2 3

1 2 3 INFORMATION FOR THE USER DRILL SELECTION CHART CARBIDE DRILLS NEXUS DRILLS DIAMOND DRILLS VP-GOLD DRILLS TDXL DRILLS EX-GOLD DRILLS V-GOLD DRILLS STEEL FRAME DRILLS HARD DRILLS V-SELECT DRILLS SPECIAL

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T Pressure-resistant gasket type retreat method effective bulk compressibility Fro Cable Gland This is the s to use for Cable Wiring in the hazardous location. It is much easier to install and maintenance and modification compared with Conduit Wiring with Sealing Fitting. The Standard

More information

WE WESB WENB WESNB 428

WE WESB WENB WESNB 428 KH-A-NL Quick Change Stub Tapper Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always

More information

Tornado Series selection SW TiCN HSS Co FAX VL PM

Tornado Series selection SW TiCN HSS Co FAX VL PM Metal Band Saw Blades Tornado Series selection SW TiCN HSS Co FAX VL PM Selection Chart Selection Chart Solids 3 Selection Teeth 4 note 1) Structurals, Tubing H section steels Light gauge steels Tube Products

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf Special Surface Treatment Rust-free under normal use conditions. No loss of precision due to rust. Minimum maintenance required. Stub Holder KH-E KH-EC1 Stub Holder KH-A 406 KH-E Quick Change Stub Holder

More information

メタルバンドソー

メタルバンドソー Metal Band Saw Blades Tornado Series selection TiCN HSS Co FAX FMX PM VL Selection Chart Selection Chart Solids Selection Teeth 3 note 1) Structurals, Tubing H section steels Light gauge steels Tube 4

More information

03-03 Bush Mentori.pdf

03-03 Bush Mentori.pdf 54 541 A Headless Press Fit Bush Type A 1. Bushing with I.D. size smaller than 3.mm uses 3 degreed chamfered radius (R). SAG6 +.2 +.4 +.14 +.5 +.17 +.1 A +.2 +.2 +.3 +.4 +.36 +.5 +.43 +.52 +.62 +.74 +.1

More information

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m

Direct Motor Drive Lead Screws / Resin Lead Screw type RM / RM RM Resin Lead Screw type RM / Resin MoBo 2 MRH 2 Features A 2-phase Stepping Motor is m RM Resin Lead Screw typerm / Resin MoBo MRH Features A -phase Stepping Motor is mounted directly onto the shaft end of a Resin Lead Screw, which is multi-use product. Lead Screw Shaft is ideally constructed

More information

429

429 WE WESB WENB WESNB 428 429 WESNB, WESNRB Quick Change Tap Adapter Tap sizes are based on old JIS standard. 0210 06100 WESN0B M3 M8M10 U1/4 U5/16U3/8 0 8 23 13 13 15 20 19.5 28 0.1 15,300 0210 06101 WESN1B

More information

Features Features FeaturesThread milling cutters 1

Features Features FeaturesThread milling cutters 1 Thread Milling Cutter Series NEW SIZES Features Features FeaturesThread milling cutters 1 Threading process (view from above) CUTTER Series PLANET Machining Technique Guide to (Tool Specification) Icons

More information

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181

I N S T R U M E N T A T I O N & E L E C T R I C A L E Q U I P M E N T STW Symbol Symbol otary switch) 05 otary switch Symbol angle of notch 181 These items are using an aluminum alloy cast, so the weight is corrosion-resistant and excel halo tolerance and is light-weight and it's about 1/3 compared with conventional cast iron and made of steel

More information

利隆塑料

利隆塑料 w w w. d g p e n g x u. c o m TECHNO PLASTICS GUIDE TECHNO ABS TECHNO MUH TECHNO AES EXCELLOY SANREX Grade Choices Flow Sheet TECHNO MUH TECHNO MUH Molding Condistions Our resin products represented

More information

PC_14ZY6_BFT150A_US_ indd

PC_14ZY6_BFT150A_US_ indd PARTS CATALOG BFT 0A OB NO.00-ZY- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October,. See the Service Bulletin for any

More information

Thread Milling Cutter Series

Thread Milling Cutter Series Thread Milling Cutter Series Features Features FeaturesThread milling cutters 1 Planet Cutter Series Threading process (view from above) Machining Technique Guide to (Tool Specification) Icons Tool Materials

More information

01.eps

01.eps 444 SumiTurn T-REX Tool Holders Cost reduction for copying with unique multiple cornered insert Carbide inserts, cermet inserts and 4 types of breakers are available. Expansion of our popular steel turning

More information

0 PARTS CATALOG BFT A BFT 0A OB NO.00-ZYET- US Instruction for use of parts catalogue This parts catalogue was prepared based on the latest information available as of October, 0. See the Service Bulletin

More information

00_1512_SLIMLINE_BOOK.indb

00_1512_SLIMLINE_BOOK.indb PIECE type SLIM type Imbalance value Less interference type, ideal for deep machining Ideal for drilling 2 PIECE REGULAR type Rigidity value Nozzle type When compared to the slim type, it has more rigidity

More information

Microsoft Word - PCM TL-Ed.4.4(特定電気用品適合性検査申込のご案内)

Microsoft Word - PCM TL-Ed.4.4(特定電気用品適合性検査申込のご案内) (2017.04 29 36 234 9 1 1. (1) 3 (2) 9 1 2 2. (1) 9 1 1 2 1 2 (2) 1 2 ( PSE-RE-101/205/306/405 2 PSE-RE-201 PSE-RE-301 PSE-RE-401 PSE-RE-302 PSE-RE-202 PSE-RE-303 PSE-RE-402 PSE-RE-203 PSE-RE-304 PSE-RE-403

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVB-85 rullvibrator EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-50 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MT65H vibratorstamp EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192 06

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MCD-L14 asfalt- och betongsåg EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se

More information

03-01 Senyouki.pdf

03-01 Senyouki.pdf WE WESB WENB WESNB 446 447 WE, WER Quick Change Tap Adapter 020 00000 WE0 M3 M8M0 U/4 U5/6U3/8 0 22 2.5 3 5 4 9.5 7 0.03 4,470 020 0000 WE M3 M2M5 U/4 U7/6U9/6 Pipe(PT,PS,PF)/8 /4 30 9 9 7 4 2.5 7 0.06

More information

<95DB8C9288E397C389C88A E696E6462>

<95DB8C9288E397C389C88A E696E6462> 2011 Vol.60 No.2 p.138 147 Performance of the Japanese long-term care benefit: An International comparison based on OECD health data Mie MORIKAWA[1] Takako TSUTSUI[2] [1]National Institute of Public Health,

More information

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part

How to read the marks and remarks used in this parts book. Section 1 : Explanation of Code Use In MRK Column OO : Interchangeable between the new part Reservdelskatalog MIKASA MVC-88 vibratorplatta EPOX Maskin AB Postadress Besöksadress Telefon Fax e-post Hemsida Version Box 6060 Landsvägen 1 08-754 71 60 08-754 81 00 info@epox.se www.epox.se 1,0 192

More information

Fig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T

Fig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.

More information

JIS A 5308 a1 moll moll moll (JP) REAGENT CHEMICALS ninth edition ACS SPECIFICATIONS Replication Duplicate standardiz

JIS A 5308 a1 moll moll moll (JP) REAGENT CHEMICALS ninth edition ACS SPECIFICATIONS Replication Duplicate standardiz Measurement Uncertainty MU 1 mol/l JIS A 5308 a1 moll 1.0000.010 moll 0.001 moll (JP) 4 3 3 0.001 0.1 REAGENT CHEMICALS ninth edition ACS SPECIFICATIONS Replication Duplicate standardizations for solutions

More information

Journal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp

Journal of Japan Institute of Light Metals, Vol. 58, No. 2 (2008), pp 58 00847 53 * ** ** Journal of Japan Institute of Light Metals, Vol. 58, No. 008, pp. 47 53 Production of aluminum tall container with flange by hydraulic bulging with compression of surrounding material

More information

Connectors for Automobiles 62 SEALED SERIES Japanese English

Connectors for Automobiles 62 SEALED SERIES Japanese English Connectors for Automobiles 62 SEALED SERIES Japanese English 62 P-01 62 P-02 ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5 20.8 2.1 M(1400-0434) F(1400-0432) ( ) ( ) ( ) ( ) 0.6 24.6 ( ) ( ) ( ) ( ) 2.5

More information

By Kenji Kinoshita, I taru Fukuda, Taiji Ota A Study on the Use of Overseas Construction Materials There are not few things which are superior in the price and the aspect of the quality to a domestic

More information

Safety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------

More information

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed a series of researches on continuous cooling transformation

More information

LC304_manual.ai

LC304_manual.ai Stick Type Electronic Calculator English INDEX Stick Type Electronic Calculator Instruction manual INDEX Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union

More information

DIN Connector_p2-25.qxd

DIN Connector_p2-25.qxd INDEX 1 DIN Connectors Varieties of DIN Connectors, Kinked Contact and One Touch Lock Metal Tab Kinked Contacts One Touch Lock Metal Tabs 2 Spec Sheet Soldering/Wire wrapping type Pitch Rated current 3A

More information

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR

NEW AquaREVO Drills Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR NEW Stub/Regular AQRVDS AQRVDR Material, design, coating are completely all renewed, Dramatically improves all functions required for drilling New Shape New Material ong

More information

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p

/ Motor Specifications Direct Motor Drive Ball Screws / Precision Ball Screw type MB / MB MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-p / Motor Specifications MB Precision Ball Screw type MB / MoBo C3 5 5 Features A 5-pahse Stepping Motor is mounted directly onto the shaft end of a C3 grade precision Ball Screw, which is suitable for high

More information

Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake

Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake Development of Induction and Exhaust Systems for Third-Era Honda Formula One Engines Induction and exhaust systems determine the amount of air intake supplied to the engine, and as such are critical elements

More information

Thread Mill Series

Thread Mill Series Thread Mill Series Index Go to the following for the quick tool search. Guide to Icons Tool Materials Helix Angle Shank Tungsten Carbide Cobalt HSS Helix angle of flute for cutters Tolerance for shank

More information

ユーザーズマニュアル

ユーザーズマニュアル 1 2 3 4 This product (including software) is designed under Japanese domestic specifications and does not conform to overseas standards. NEC *1 will not be held responsible for any consequences resulting

More information

KOMET KUB K2® 小径対応ヘッド交換式ドリル

KOMET KUB K2® 小径対応ヘッド交換式ドリル KOMET KUB K2 Replaceable Head Drill for Tiny Diameters With this replaceable head system for the doublecutting KUB K2, KOMET has introduced an ingenious system of replaceable drill heads. These now also

More information

A Nutritional Study of Anemia in Pregnancy Hematologic Characteristics in Pregnancy (Part 1) Keizo Shiraki, Fumiko Hisaoka Department of Nutrition, Sc

A Nutritional Study of Anemia in Pregnancy Hematologic Characteristics in Pregnancy (Part 1) Keizo Shiraki, Fumiko Hisaoka Department of Nutrition, Sc A Nutritional Study of Anemia in Pregnancy Hematologic Characteristics in Pregnancy (Part 1) Keizo Shiraki, Fumiko Hisaoka Department of Nutrition, School of Medicine, Tokushima University, Tokushima Fetal

More information

1. Database&Logic 2. 3. Word/Excel/PPT/PDF&Web Ultimate Dictionary 4. Jukkou&Rewrite 5. Convenience&Safety 6. Chinese&Korean 7. Support&Consultation 8

1. Database&Logic 2. 3. Word/Excel/PPT/PDF&Web Ultimate Dictionary 4. Jukkou&Rewrite 5. Convenience&Safety 6. Chinese&Korean 7. Support&Consultation 8 www.jukkou.com 1. Database&Logic 2. 3. Word/Excel/PPT/PDF&Web Ultimate Dictionary 4. Jukkou&Rewrite 5. Convenience&Safety 6. Chinese&Korean 7. Support&Consultation 8. Jukkou Z 9. Introduction Example 10.

More information

The Indirect Support to Faculty Advisers of die Individual Learning Support System for Underachieving Student The Indirect Support to Faculty Advisers of the Individual Learning Support System for Underachieving

More information

目次・本文01.ai

目次・本文01.ai L W BELLOWS Saginomiya started with the research and development of bellows and has expanded to develop applied products. These include, individual controls for freezing, refrigeration, air conditioning,

More information

5 11 3 1....1 2. 5...4 (1)...5...6...7...17...22 (2)...70...71...72...77...82 (3)...85...86...87...92...97 (4)...101...102...103...112...117 (5)...121...122...123...125...128 1. 10 Web Web WG 5 4 5 ²

More information

Vol. A-TAP A-SFT A-POT Highly Efficient Multi-Purpose Tap Series Galling No Galling Galling No Galling Spiral Fluted Tap NEXT NEW SIZES FROM NEXT Spiral Fluted Tap FROM P.18 P.20 NEXT NEW SIZES FROM

More information

Ł\”ƒ_−mflF

Ł\”ƒ_−mflF COAXIAL CONNECTORS CAT.NO.COAX-007H.JAN.2018 Adapter for pin/socket conversion of the same series or connection between connectors of different series. Applicable to various series. A wide variety of types

More information

修士論文

修士論文 2004 Decay of timber and its mechanical characteristic 1075015 1075015 1. 1 1. 2. 3. 4. 5. 4.5. 2. JIS 3. 3.1 3.1.1 ( ) ( ) i 3.1.2 3.1.3 10 3.2 ( 3% ) 4 3% ii Decay of timber and its mechanical characteristic

More information

™…

™… Review The Secret to Healthy Long Life Decrease in Oxidative and Mental Stress My motto is Health is not all. But nothing can be done without health. Health is the most important requisite for all human

More information

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate

More information

1..FEM FEM 3. 4.

1..FEM FEM 3. 4. 008 stress behavior at the joint of stringer to cross beam of the steel railway bridge 1115117 1..FEM FEM 3. 4. ABSTRACT 1. BackgroundPurpose The occurrence of fatigue crack is reported in the joint of

More information

The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Sh

The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Sh The Evaluation on Impact Strength of Structural Elements by Means of Drop Weight Test Elastic Response and Elastic Limit by Hiroshi Maenaka, Member Shigeru Kitamura, Member Masaaki Sakuma Genya Aoki, Member

More information

IEC :2014 (ed. 4) の概要 (ed. 2)

IEC :2014 (ed. 4) の概要 (ed. 2) IEC 60601-1-2:2014 (ed. 4) (ed. 2) e 2018 4 2 1 1 2 / 1 2.1............... 2 2.2............... 3 2.3.................. 4 3 6 4 6 4.1.................. 6 4.1.1............... 7 4.1.2....... 7 4.1.3............

More information

Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth

Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth Studies of Foot Form for Footwear Design (Part 9) : Characteristics of the Foot Form of Young and Elder Women Based on their Sizes of Ball Joint Girth and Foot Breadth Akiko Yamamoto Fukuoka Women's University,

More information

Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test conditions except for t

Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test conditions except for t Review of Seatbelt Anchorage and Dimensions of Test Bench Seat Cushion JASIC Motivation and Purpose There is no definition about whether seatbelt anchorage should be fixed or not. We tested the same test

More information

音響部品アクセサリ本文(AC06)PDF (Page 16)

音響部品アクセサリ本文(AC06)PDF (Page 16) Guide for Electret Condenser Microphones A microphone as an audio-electric converting device, whose audio pickup section has a structure of a condenser consisting of a diaphragm and a back plate opposite

More information

チューブ技術資料 (MS ;rev_O;ja-JP;技術情報)

チューブ技術資料 (MS ;rev_O;ja-JP;技術情報) G-7............................ G-7........................ G-7................................. G-8............................... G-8................................. G-9.......................... G-10...................................

More information

KSKH(MX).indd

KSKH(MX).indd KS/KH Chain cutter device Machine models MX Series Parts Catalog INTRODUCTION This parts catalog covers the KS,KH device which are manufactured in November, 2003. The components are shown on pages 4-7.

More information

T05_Nd-Fe-B磁石.indd

T05_Nd-Fe-B磁石.indd Influence of Intergranular Grain Boundary Phases on Coercivity in Nd-Fe-B-based Magnets Takeshi Nishiuchi Teruo Kohashi Isao Kitagawa Akira Sugawara Hiroyuki Yamamoto To determine how to increase the coercivity

More information

アクアEXオイルホールロング(CC2015).indd

アクアEXオイルホールロング(CC2015).indd High Efficiency Deep Hole Drilling D 1D 20D 2D 0D UA Drills Oil-Hole Long Non-Step drilling is possible at the hole depth of 0D High efficient drilling with long tool life with Wet and MQL Cutting edge

More information

(1 ) (2 ) Table 1. Details of each bar group sheared simultaneously (major shearing unit). 208

(1 ) (2 ) Table 1. Details of each bar group sheared simultaneously (major shearing unit). 208 2463 UDC 621.771.251.09 : 621.791.94: 669.012.5 Improvement in Cold Shear Yield of Bar Mill by Computer Control System Koji INAZAKI, Takashi WASEDA, Michiaki TAKAHASHI, and Toshihiro OKA Synopsis: The

More information

untitled

untitled TZ-BDT910M TZ-BDT910F TZ-BDT910P μ μ μ μ TM VQT3F51-1 l l l [HDD] [BD-RE] [BD-R] [DVD-V] [BD-V] [RAM] [CD] [SD] [-R] [USB] [-RW] [RAM AVCREC ] [-R AVCREC ] [RAM VR ][-R VR ] [-RW VR ] [-R V ] [-RW

More information

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc.

FG/FCG Pressure-Temperature Compensated Flow Control Valves, Tokyo Keiki Inc. -temperature compensated flow control valves (with check valve) F(C)G/ - Functional Symbols Valve is pressure and temperature compensated and flow is maintained at a constant level even over changes in

More information

Table 1. Assumed performance of a water electrol ysis plant. Fig. 1. Structure of a proposed power generation system utilizing waste heat from factori

Table 1. Assumed performance of a water electrol ysis plant. Fig. 1. Structure of a proposed power generation system utilizing waste heat from factori Proposal and Characteristics Evaluation of a Power Generation System Utilizing Waste Heat from Factories for Load Leveling Pyong Sik Pak, Member, Takashi Arima, Non-member (Osaka University) In this paper,

More information

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3

コード型式タップサイズキャップ L D kg コレットプリセットドライバスパナ Code Model Tap Size Nut Collet Preset Driver Spanner BT50 -STM J 型タップ (Old JIS Taps) 105 3 BT BT AHO HSK A/E/F/C HSK T C UTS 専用機関連機器ブシュ メントリミSTM 高さ調整式シンクロ用タップホルダ Synchronous Tap Holder With Easy Tool Length Adjustment 刃先突き出し長さの調整はホルダ外周部を回すだけで完了 Projection length of the cutting tool can be adjusted

More information

The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch

The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Ch The Effect of the Circumferential Temperature Change on the Change in the Strain Energy of Carbon Steel during the Rotatory Bending Fatigue Test by Chikara MINAMISAWA, Nozomu AOKI (Department of Mechanical

More information

DZ-GX20/DZ-MV780取扱説明書(上巻)

DZ-GX20/DZ-MV780取扱説明書(上巻) DZ-GX20 DZ-MV780(S) DZ-MV780(R) DZ-MV780(A) Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use

More information

第122号(A4、E)(4C)/3 宇野ほか

第122号(A4、E)(4C)/3 宇野ほか trans Development of high performance heat resistant transparent polyimides based on trans-,,, -cyclopentanetetracarboxylic dianhydride Takaaki Uno Takashi Okada Igor Rozhanskii Toshimitsu Kikuchi Kohei

More information

ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ

ÉXÅ[ÉpÅ[ÉRÉuÉâï\éÜ class SCLE HELICOPTER SUPERCOR W-1W ODY KIT INSTRUCTION MNUL SUPERCOR Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive to SUPERCOR.

More information

16_.....E...._.I.v2006

16_.....E...._.I.v2006 55 1 18 Bull. Nara Univ. Educ., Vol. 55, No.1 (Cult. & Soc.), 2006 165 2002 * 18 Collaboration Between a School Athletic Club and a Community Sports Club A Case Study of SOLESTRELLA NARA 2002 Rie TAKAMURA

More information

2 3 12 13 6 7

2 3 12 13 6 7 2 8 17 42ZH700046ZH700052ZH7000 28 43 54 63 74 89 2 3 12 13 6 7 3 4 11 21 34 63 65 8 17 4 11 4 55 12 12 10 77 56 12 43 43 13 30 43 43 43 43 10 45 14 25 9 23 74 23 19 24 43 8 26 8 9 9 4 8 30 42 82 18 43

More information

06mokuji.indb

06mokuji.indb : JIS A 9501 2006 Basics 基 本 Standard practice for thermal insulation works 23 JIS B 0202 1999 Parallel pipe threads ISO 228-1 94 (MOD) 89 JIS B 0203 1999 Taper pipe threads ISO 7-1 94 (MOD) 96 JIS B 0253

More information

渡辺(2309)_渡辺(2309)

渡辺(2309)_渡辺(2309) [ 29 p. 241-247 (2011)] ** *** ** ** Development of a nickel-based filler metal containing a small amount of silicon by WATANABE Takehiko, WAKATSUKI Ken, YANAGISAWA Atsusi and SASAKI Tomohiro Authors tried

More information

UT(W1600).indd

UT(W1600).indd UT UT Thread Trimmer for W1600 Series W1600 Parts Catalog INTRODUCTION This parts catalog covers the UT device which are manufactured in November, 2006. The components are shown on pages 4-19. The illustrations

More information

Visual Evaluation of Polka-dot Patterns Yoojin LEE and Nobuko NARUSE * Granduate School of Bunka Women's University, and * Faculty of Fashion Science,

Visual Evaluation of Polka-dot Patterns Yoojin LEE and Nobuko NARUSE * Granduate School of Bunka Women's University, and * Faculty of Fashion Science, Visual Evaluation of Polka-dot Patterns Yoojin LEE and Nobuko NARUSE * Granduate School of Bunka Women's University, and * Faculty of Fashion Science, Bunka Women's University, Shibuya-ku, Tokyo 151-8523

More information

ÉgÉEÉRÉuÉâï\éÜ

ÉgÉEÉRÉuÉâï\éÜ 60 class SCLE HELICOPTER TOWCOR H-1SIII ODY KIT INSTRUCTION MNUL TOWCOR 60 Please read this manual in its entirety before attempting to assemble the helicopter. This manual explains the parts exclusive

More information

WASEDA University Internship Guide http://www.waseda.jp/career/internship/ 1 2 3 For International Students International students who are interested in internships with Japanese corporations must be

More information

Huawei G6-L22 QSG-V100R001_02

Huawei  G6-L22 QSG-V100R001_02 G6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 17 4 5 18 UI 100% 8:08 19 100% 8:08 20 100% 8:08 21 100% 8:08 22 100% 8:08 ********** 23 100% 8:08 Happy birthday! 24 S S 25 100% 8:08 26 http://consumer.huawei.com/jp/

More information

*1 *2 *1 JIS A X TEM 950 TEM JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbe

*1 *2 *1 JIS A X TEM 950 TEM JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbe *1 *2 *1 JIS A 14812008X TEM 950 TEM 1 2 3 4 JIS Development and Research of the Equipment for Conversion to Harmless Substances and Recycle of Asbestos with Superheated Steam Part 3 An evaluation with

More information

untitled

untitled SATO Kentaro Milk and its by-products are naturally nutritious food, and people in ancient Japan enjoyed tasting them as foods, drinks, or medicines. On the other hand, milk and its by-products were closely

More information

10生活環境研究報告.indd

10生活環境研究報告.indd It is well known that there are great differences among the flow characteristics of a non- Newtonian fluid such as gelatinized starch dispersions, depending on the analytical devices used and measurement

More information

untitled

untitled -1- -2- -3- -4- -5- OPERATION 44.4% 20.4% 14.8% 20.4% RECEIVING OPERATION CALLING OTHERS -6- (Evaluation) (Synthesis) (Analysis) (Application) (Comprehension) (Knowledge) -7- Level 3 Level 2 Level 1 Level

More information

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i

Anti-Vibration AD Bar for Internal Machining AD Feature for maximum 6 times of L/D with the advanced damper effect. By anti vibration damper effect, i 内径 Boring ADバー AD Bar ADバー 防振機構内蔵ヘッド交換式ボーリングバー Anti-Vibration AD Bar ヘビーメタル製特殊ダンパー機構で ビビリ や 振動 を抑制 Suppressed chattering with the anti-vibration dampener ヘッド交換で 多様な加工に対応 A wide variety of internal machining

More information

2002-

2002- Application Limits of Flux Cored Arc Welding to Chemical Processing Plants Sumitomo Chemical Co., Ltd. Process & Production Technology Center Takahisa HOSHIKA Hisakazu MORI High efficiency of Flux Cored

More information

Vol. 48 No. 4 Apr LAN TCP/IP LAN TCP/IP 1 PC TCP/IP 1 PC User-mode Linux 12 Development of a System to Visualize Computer Network Behavior for L

Vol. 48 No. 4 Apr LAN TCP/IP LAN TCP/IP 1 PC TCP/IP 1 PC User-mode Linux 12 Development of a System to Visualize Computer Network Behavior for L Vol. 48 No. 4 Apr. 2007 LAN TCP/IP LAN TCP/IP 1 PC TCP/IP 1 PC User-mode Linux 12 Development of a System to Visualize Computer Network Behavior for Learning to Associate LAN Construction Skills with TCP/IP

More information

DZ-HS503 取扱説明書

DZ-HS503 取扱説明書 DZ-HS503 Important Information WARNING : To prevent fire or shock hazard, do not expose this unit to rain or moisture. WARNING : To prevent fire or shock hazard, use the recommended accessories only. CAUTION

More information

,, 2024 2024 Web ,, ID ID. ID. ID. ID. must ID. ID. . ... BETWEENNo., - ESPNo. Works Impact of the Recruitment System of New Graduates as Temporary Staff on Transition from College to Work Naoyuki

More information

Introduction ur company has just started service to cut out sugar chains from protein and supply them to users by utilizing the handling technology of

Introduction ur company has just started service to cut out sugar chains from protein and supply them to users by utilizing the handling technology of Standard PA-Sugar Chain Catalogue Masuda Chemical Industries Co., LTD. http://www.mc-ind.co.jp Introduction ur company has just started service to cut out sugar chains from protein and supply them to users

More information

429

429 WE WESB WENB WESNB 428 429 WENB, WENRB Quick Change Tap Adapter 0210 11000 WEN0B M3 M8M10 U1/4 U5/16U3/8 0 8 22 13 13 15 4 19.5 28 0.05 10,170 0210 11001 WEN1B M3 M12M15 U1/4 U7/16U9/16 Pipe(PT,PS,PF)1/8

More information

A5 PDF.pwd

A5 PDF.pwd DV DV DV DV DV DV 67 1 2016 5 383 DV DV DV DV DV DV DV DV DV 384 67 1 2016 5 DV DV DV NPO DV NPO NPO 67 1 2016 5 385 DV DV DV 386 67 1 2016 5 DV DV DV DV DV WHO Edleson, J. L. 1999. The overlap between

More information

OSG_BIT

OSG_BIT Characteristics Quality starts with consistent tooling -Insist on OSG bits that elivers precision tooling with harness, consistency an maximum torsion strength meeting the market nees. OSG bits FIBER FOW

More information

MFS 2B 2.5B 3.5B OB NO NB 3,000

MFS 2B 2.5B 3.5B OB NO NB 3,000 MFS B.5B 3.5B OB NO.00-105-1 0910 NB 3,000 HOW TO USE THIS PARTS LIST 1. This Parts List contains the component parts of the Tohatsu outboard motors.. Please keep the Parts List updated each time when

More information

Description

Description Metal Hybrid Inductor Description Metal Hybrid Inductor Magnetically shielded Suitable for Large Current Size: 4.3 x 4.3 x H2.1 mm Max. Product weight:.18g (Ref.) Halogen Free available Operating temperature

More information

202

202 201 Presenteeism 202 203 204 Table 1. Name Elements of Work Productivity Targeted Populations Measurement items of Presenteeism (Number of Items) Reliability Validity α α 205 α ä 206 Table 2. Factors of

More information

137. Tenancy specific information (a) Amount of deposit paid. (insert amount of deposit paid; in the case of a joint tenancy it should be the total am

137. Tenancy specific information (a) Amount of deposit paid. (insert amount of deposit paid; in the case of a joint tenancy it should be the total am 13Fast Fair Secure PRESCRIBED INFORMATION RELATING TO TENANCY DEPOSITS* The Letting Protection Service Northern Ireland NOTE: The landlord must supply the tenant with the Prescribed Information regarding

More information

Specification for Manual Pulse Generator, GFK-2262

Specification for Manual Pulse Generator, GFK-2262 Specification change in Manual Pulse Generator () A) Abstract This document explains about the specification change in Manual Pulse Generator (). The production of the former specifications written in

More information

ASP英語科目群ALE Active Learning in English No 7. What activity do you think is needed in ALE for students to improve student s English ability? active listening a set of important words before every lecture

More information

2

2 8 24 32C800037C800042C8000 32 40 45 54 2 3 24 40 10 11 54 4 7 54 30 26 7 9 8 5 6 7 9 8 18 7 7 7 40 10 13 12 24 22 22 8 55 8 8 8 8 1 2 3 18 11 54 54 19 24 30 69 31 40 57 23 23 22 23 22 57 8 9 30 12 12 56

More information