DC Fan 4mm sq. San Ace 4 1mm thick, 15mm thick (GA type), 15mm thick, 2mm thick (GA type), 2mm thick 28mm thick (GA type), 28mm thick (GE type) 28mm thick (GV type), 28mm thick General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control (With Storage Temperature 3 to 7 Non-condensing PWM control function) brown 4 4 15mm Mass 28g GA type High Air Flow Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 9GA412P7G1 12 1.2 to 13.8 1.17 2.4 13,1.36 12.7 192.77 42 2 to 7 Note 1: Fan does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. 4,/6 (7,/4 ) PWM Model No. The following nos. have pulse sensors and ribs. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note1) V V A W min m³/min Pa inchh ² O db(a) h 9GA412G71.17 2.4 13,1.36 12.7 192.77 42 12 7 to 13.8 9GA412H71.6.72 7,3.2 7.1 59.6.24 28 Note 1: Expected life at 4 ambient is just reference value. Available options: Without Sensor Lock Sensor Please inquire as the availability of these functions depend on the model. PWM Control 2 to 7 4,/6 (7,/4 ) Dimensions Unit : mm (With PWM speed control function With pulse sensor) 4-3.5±.3 Mounting Hole +3 32 15.2±.5 (4) (4) Reference dimension of mounting holes and vent opening Unit : mm 39 32.3 (17.6) 4-3.7 4±.3 32±.3 (1) 4 32±.3 4±.3 Lead Wire AWG28 UL17 (17.6) 32.3 39 Rotating Direction Air Flow Direction 19
Options Unit : mm Finger guards Color Model 19-59 Surface treatment Nickel-chrome plating silver 3.5.3 29.5 4 1 DC Fan 4mm 49.5 18.3 38.5 45.3 Air Flow - Static Pressure Characteristics PWM With PWM speed control function With pulse sensor 1.2 3 DC 1. 25.8 2.6 15.4 1.2 5 1% 5%.1.2.3.4 5 1 15 9GA412P7G1 Operating Voltage Range.5 With PWM speed control function With pulse sensor 1.2 1..8.6.4.2 3 25 2 15 1 5.1.2.3.4 PWM 1 1 13.8V 1.2V.5 1.2 1..8.6.4.2 3 25 2 15 1 5 13.8V 7V.1.2.3.4 5 1 15 5 1 15 2 4 6 8 9GA412P7G1 With pulse sensor 9GA412G71 DC.5.4.3.2.1 1 9 8 7 6 5 4 3 2 1 With pulse sensor 13.8V 7V.5.1.15.2 9GA412H71 DC.25 PWM Duty - Speed Characteristics Example With PWM speed control function With pulse sensor Voltage DC DC 15, Rotation min Speed min 1, 5, 13,1min -1 1 % 9GA412P7G1 2
DC Fan 4mm sq. San Ace 4 1mm thick, 15mm thick (GA type), 15mm thick, 2mm thick (GA type), 2mm thick 28mm thick (GA type), 28mm thick (GE type) 28mm thick (GV type), 28mm thick General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 4 4 2mm Mass 35g GA type High Air Flow Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA45P6H1 Note) 1.35 1.75 12,4.33 11.7 191.77 4 4, 5 4.5 to 5.5 9GA45P6F1 Note) 1.18.9 8,.21 7.4 79.5.32 28 6, 1.23 2.76 16,.42 14.8 318 1.28 47 9GA412P6G1 4,.4.48 3,8.1 3.5 17.9.7 14 1.14 1.68 12,4.33 11.7 191.77 4 9GA412P6H1 12 1.2 to 13.8.4.48 3,8.1 3.5 17.9.7 14 2 to 7 6, 1.8.96 8,.21 7.4 79.5.32 28 9GA412P6F1.3.36 2,2.6 2.1 6..2 1 9GA424P6G1 Note) 1.13 3.12 16,.42 14.8 318 1.28 47 4, 9GA424P6H1 Note) 24 2.4 to 27.6 1.8 1.92 12,4.33 11.7 191.77 4 6, 9GA424P6F1 Note) 1.4.96 8,.21 7.4 79.5.32 28 Note: Rated voltage 5V and 24V fans do not rotate when PWM duty cycle is. Available options: Without Sensor Pulse Sensor PWM Dimensions Unit : mm 4 3.5.3 Mounting Hole +3 32 Reference dimension of mounting holes and vent opening Unit : mm 39 32.3 (17.6) 4-3.7 4.3 32.3 (1) 32.3 4.3 Lead Wire AWG26 UL17 (4) 2.5 (4) 4 (17.6) 32.3 39 Rotating Direction Air Flow Direction 23
Options Unit : mm Finger guards Color Model 19-59 Surface treatment Nickel-chrome plating silver 3.5.3 29.5 4 1 49.5 DC Fan 4mm 18.3 38.5 45.3 Air Flow - Static Pressure Characteristics PWM 1.2 3 DC 5V 12 DC 5V 1..8.6.4.2 25 2 15 1 5 1% 5%.4 1 8.3 6.2 4.1 2 1% 5%.1.2.3.4 2 4 6 8 1 12 14 9GA45P6H1.1.2 2 4 6 8 Air Flow 9GA45P6F1.3 1 Operating Voltage Range 1.2 3 PWM 1 12 PWM 1 1..8.6.4.2 25 2 15 1 5 5.5V 5V 4.5V.4 1 8.3 6.2 4.1 2 5.5V 5V 4.5V.1.2.3.4 2 4 6 8 1 12 14 9GA45P6H1.1.2.3 2 4 6 8 1 9GA45P6F1 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage 5V DC5V DC 14, 12, 12,4min -1 1, 8, 6, 4, 2, 1 % 9GA45P6H1 Rotation min Speed min Voltage 5V DC5V DC 14, 12, 1, 8, 6, 4, 2, 8,min -1 1 % 9GA45P6F1 24
DC Fan 4mm sq. San Ace 4 4 4 2mm Mass 35g Air Flow - Static Pressure Characteristics PWM 1.6 4 1.4 35 1.2 3 1. 25.8 2.6.4 15 1.2 5 DC 1% 5% %.1.2.3.4.5 5 1 15 Air Flow 9GA412P6G1 Operating Voltage Range 1.2 1..8.6.4.2 3 25 2 15 1% 1 5 5% % DC.1.2.3.4 2 4 6 8 1 12 14 9GA412P6H1.3.2.1 12.4 1 8 6 4 2 % 1%.1 5%.2 2 4 6 8 Air Flow DC 9GA412P6F1.3 1 1.6 4 PWM 1 1 1.4 35 13.8V 1.2 3 1. 25.8 2 1.2V.6 15.4 1.2 5.1.2.3.4.5 5 1 15 9GA412P6G1 1.2 3.2 5 PWM 1 1 1. 25 13.8V.8 2.6 15 1.2V.4 1.1.2.3.4 2 4 6 8 1 12 14 9GA412P6H1 12 PWM 1 1.4 1 13.8V 8.3 6.2 4 1.2V.1 2.1.2.3 2 4 6 8 1 9GA412P6F1 PWM Duty - Speed Characteristics Example Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage DC DC PWM 3,8min -1 16,min -1 Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage DC DC PWM 3,8min -1 12,4min -1 Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage DC DC PWM 2,2min -1 8,min -1 1 1 1 % % % 9GA412P6G1 9GA412P6H1 9GA412P6F1 25
DC Fan 4mm 1.8 45 1.6 4 1.4 35.1.2 DC 24V 1.2 3 1..8 25 2 1%.6 15.4 1.2 5 5%.3.4.5.6 5 1 15 2 9GA424P6G1 1.2 3 1. 25.8 2.6.4 15 1 1%.2 5 5%.1 DC 24V.2.3.4 2 4 6 8 1 12 14 9GA424P6H1 12.4 1.3.2 8 6 1% 4.1 2 5%.1.2 DC 24V.3 2 4 6 8 1 9GA424P6F1 1.8 45 1.6 4 1.4 35 PWM 1 1 1.2 1. 3 25 27.6V.8 2 24V.6 15 2.4V.4 1.2 5.1.2.3.4.5.6 5 1 15 2 Air Flow 9GA424P6G1 1.2 3 PWM 1 1. 25 27.6V.8 2.6 15 24V.4 1 2.4V.2 5.1.2.3.4 2 4 6 8 1 12 14 Air Flow 9GA424P6H1 12 PWM 1 1.4 1 27.6V.3 8 24V 6.2 2.4V 4.1 2.1.2 2 4 6 8 1 Air Flow 9GA424P6F1.3 Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage 24V DC24V DC PWM 16,min -1 Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage 24V DC24V DC PWM 12,4min -1 Rotation min Speed min 16, 14, 12, 1, 8, 6, 4, 2, Voltage 24V DC24V DC PWM 8,min -1 1 1 1 % % % 9GA424P6G1 9GA424P6H1 9GA424P6F1 26
DC Fan 4mm sq. San Ace 4 1mm thick, 15mm thick (GA type), 15mm thick, 2mm thick (GA type), 2mm thick 28mm thick (GA type), 28mm thick (GE type) 28mm thick (GV type), 28mm thick General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 4 4 28mm Mass 53g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA412P3K1 1.92 11.4 22,.81 28.6 799 3.21 61.1 1.2 6,5.23 8.12 68.27 32 2 to 6 3, 9GA412P3J1 1.49 5.88 18,.67 23.7 535 2.15 54.5.6 4,5.16 5.7 33.13 22 9GA412P3G1 12 1.8 to 13.2 1.39 4.68 16,5.61 2 45 1.81 53.5.6 4,5.16 5.7 33.13 22 9GA412P3H1 1.28 3.36 14,5.54 19.1 347 1.39 5.4.48 3,5.13 4.6 2.8 17 9GA412P3M1 1.21 2.52 12,5.46 16.2 258 1.4 47.4.48 3,5.13 4.6 2.8 17 2 to 7 4, 9GA424P3J1 Note1 1.27 6.48 18,.67 23.7 535 2.15 54 9GA424P3G1 Note1 1.22 5.28 16,5.61 2 45 1.81 53 24 21.6 to 26.4 9GA424P3H1 Note1 1.16 3.84 14,5.54 19.1 347 1.39 5 9GA424P3M1 Note1 1.11 2.64 12,5.46 16.2 258 1.4 47 Note 1 : Rated voltage 24V fans do not rotate when PWM duty cycle is. Available options: Without Sensor Pulse Sensor PWM Dimensions Unit : mm (With ribs) 4-3.5.3 Mounting Hole 3 32 4.3 32.3 1 32.3 4.3 Lead Wire AWG26 UL17 4 28.5 4 Rotating Direction Air Flow Direction 31
Reference dimension of mounting holes and vent opening Unit : mm 39 32.3 4-3.7 17.6 4 17.6 32.3 39 Options Unit : mm Finger guards Color Model 19-59 Surface treatment Nickel-chrome plating silver 49.5 3.5.3 29.5 18.3 4 1 38.5 DC Fan 4mm 45.3 Air Flow - Static Pressure Characteristics PWM 4. 3.5 3. 2.5 2. 1..5 DC 1, 9 8 7 6 5 1% 4 3 2 % 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 9GA412P3K1 7 2.5 6 2. 5 4 3 1. 2.5 1 % 1% 5% DC.1.2.3.4.5.6.7.8 5 1 15 2 25 9GA412P3J1 7 2.5 6 2. 5 4 3 1. 2.5 1 %.1.2.3.4 1% 5% DC.5.6.7 5 1 15 2 25 9GA412P3G1.8 Operating Voltage Range 4. 1, PWM 1 3.5 9 3. 8 7 2.5 6 13.2V 2. 5 1. 4 3 2 1.8V.5 1.1.2.3.4.5.6.7.8.9 5 1 15 2 25 3 9GA412P3K1 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 13.2V 1.8V.1.2.3.4.5.6.7.8 5 1 15 2 25 9GA412P3J1 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 13.2V 1.8V.1.2.3.4.5.6.7.8 5 1 15 2 25 9GA412P3G1 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC PWM 2, 15, 1, 6,5min -1 5, 22,min -1 min Rotation Speed min Voltage DC DC 2, 15, 1, 5, 4,5min -1 18,min -1 min Rotation Speed min 2, 15, 1, 5, Voltage DC DC PWM 4,5min -1 16,5min -1 1 % 9GA412P3K1 1 % 9GA412P3J1 1 % 9GA412P3G1 32
DC Fan 4mm sq. San Ace 4 4 4 28mm Mass 53g Air Flow - Static Pressure Characteristics PWM 2. 1..5 5 4 3 2 1 % 1% 5%.1.2.3.4.5.6.7 5 1 15 2 DC 9GA412P3H1 Operating Voltage Range DC 35 7 1.25 3 2.5 6 1. 25 2. 5.75 2 1% 4 1% 15 3.5 1..25 1 2 5%.5 5 % 1 5%.1.2.3.4.5.6 m /min.1.2.3.4.5.6.7.8 5 1 15 2 9GA412P3M1 Static Pressure DC24 5 1 15 2 25 Air Flow 9GA424P3J1 2. 5 4 3 1. 2.5 1 PWM 1 1 13.2V 1.8V.1.2.3.4.5.6.7 5 1 15 2 9GA412P3H1 1.25 1..75.5.25 35 3 25 2 15 1 5 PWM 1 1 13.2V 1.8V.1.2.3.4.5.6.1.2.3.4.5.6.7.8 5 1 15 2 5 1 15 2 25 Air Flow 9GA412P3M1 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 1 26.4V 24V 21.6V 9GA424P3J1 PWM Duty - Speed Characteristics Example min Rotation Speed min 2, 15, 1, 5, Voltage DC DC PWM 3,5min -1 14,5min -1 min Rotation Speed min 2, 15, 1, 5, Voltage DC DC PWM 3,5min -1 12,5min -1 Rotation min Speed min Voltage 24V DC24V DC 2, 15, 1, 5, 18,min -1 1 % 9GA412P3H1 1 % 9GA412P3M1 1 % 9GA424P3J1 33
DC Fan 4mm 7 2.5 6 2. 5 4 3 1. 2.5 1 DC24 1% 5% 2. 5 4 3 1. 2.5 1 DC24 1% 5% 35 1.25 3 1. 25.75 2 15.5 1.25 5 DC24 1% 5%.1.2.3.4.5.6.7.8 5 1 15 2 25 9GA424P3G1.1.2.3.4.5.6.7 5 1 15 2 Air Flow 9GA424P3H1.1.2.3.4.5.6 5 1 15 2 Air Flow 9GA424P3M1 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 1 26.4V 24V 21.6V.1.2.3.4.5.6.7.8 5 1 15 2 25 9GA424P3G1 2. 5 4 3 1. 2.5 1 PWM 1 1 26.4V 24V.1.2.3.4 21.6V.5.6.7 5 1 15 2 Air Flow 9GA424P3H1 1.25 3 1. 25 2.75 15.5 1.25 35 5 PWM 1 1 26.4V 24V 21.6V.1.2.3.4.5.6 5 1 15 2 9GA424P3M1 Rotation min Speed min Voltage 24V DC24V DC 2, 15, 1, 5, 16,5min -1 Rotation min Speed min 2, 15, 1, 5, Voltage 24V DC24V DC 14,5min -1 Rotation min Speed min Voltage 24V DC24V DC 2, 15, 1, 5, 12,5min -1 1 % 9GA424P3G1 1 % 9GA424P3H1 1 % 9GA424P3M1 34
DC Fan 52mm sq. San Ace 52 15mm thick (GA type), 15mm thick General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 52 52 15mm Mass 4g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V cycle Note) % A W min m³/min Pa inchh ² O db(a) h 9GA512P7G1.13 6 7,8.5 17.7 9.367 38 9GA512P7A1.8.96 6,3.4 14.1 59.237 32 12 1.2 to 13.8 1 9GA512P7H1.5.6 4,3.275 9.7 27.5.11 22 9GA524P7A1.5 1.2 6,3.4 14.1 59..237 32 24 2.4 to 27.6 1 9GA524P7H1.3.72 4,3.275 9.7 27.5.11 22 9GA512P7M1.4.48 3,4.215 7.6 17.68 16 9GA524P7G1.7 1.68 7,8.5 17.7 9.367 38 2 to 7 4, 9GA524P7M1.2.48 3,4.215 7.6 17..68 16 Note : Fan does not rotate when PWM duty cycle is %. Available options: Without Sensor Pulse Sensor PWM Dimensions Unit : mm 4-4.5.3 Mounting Hole +5 3 52.5 42.3 42.3 52.5 Rotating Direction (1) Lead Wire AWG26 UL17 (3) (3) 15.5 Air Flow Direction 43
Reference dimension of mounting holes and vent opening Unit : mm 5.4 42.3 DC Fan 52mm 53 5.4 42.3 4-4.5 Options Unit : mm Finger guards Color Model 19-149 Surface treatment Nickel-chrome plating silver Model 19-149E Color Surface treatment Nickel-chrome plating silver Outlet side 63.2.5 43.8 32.6 3.7.3 53.3 4 1.5 63.2 3.7.3 43.8 53.3 4 1 59.4 59.4 44
DC Fan 52mm sq. San Ace 52 52 52 15mm Mass 4g Air Flow - Static Pressure Characteristics PWM.5.4.3.2.1 12 1 8 6 4 2 DC/24V 1% 5%.4 1 8.3 6.2 4.1 2 DC/24V 1% 5%.15.1.5 4 3 2 1 DC/24V 1% 5%.1.2.3.4.5.6.1.2.3.4.5 5 1 15 2 5 1 15 5 1 15 Air Flow 9GA512P7G1 9GA524P7G1 Operating Voltage Range 9GA512P7A1 9GA524P7A1.1.2.3.4 9GA512P7H1 9GA524P7H1.5 12.4 1 8.3 6.2 4.1 2 PWM 1 1 13.8V/27.6V /24V 1.2V/2.4V.4.3.2.1 1 8 6 4 2 PWM 1 1 13.8V/27.6V /24V 1.2V/2.4V.15.1.5 4 3 2 1 PWM 1 1 13.8V/27.6V /24V 1.2V/2.4V.1.2.3.4.5.6.1.2.3.4.5 5 1 15 2 5 1 15 5 1 15 9GA512P7G1 9GA524P7G1 9GA512P7A1 9GA524P7A1.1.2.3.4 9GA512P7H1 9GA524P7H1 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC/24V / 24V DC 8, 7,8min -1 6, 4, 2, 1 % 9GA512P7G1 9GA524P7G1 Rotation min Speed min Voltage DC // 24V DC 8, 6,3min 6, -1 4, 2, 1 % 9GA512P7A1 9GA524P7A1 Rotation min Speed min Voltage DC // 24V DC 6, 5, 4, 3, 2, 1, 4,3min -1 1 % 9GA512P7H1 9GA524P7H1 45
DC Fan 52mm 1.2 3 DC/24V 1..8.6.4.2 25 2 15 1 5 1% 5%.1.2.3 2 4 6 8 1 9GA512P7M1 9GA524P7M1 1.2 3 PWM 1 1..8.6.4.2 25 2 15 1 5 13.8V/27.6V /24V 1.2V/2.4V.1.2.3 2 4 6 8 1 9GA512P7M1 9GA524P7M1 Rotation min Speed min Voltage DC // 24V DC 6, 5, 4, 3,4min -1 3, 2, 1, 1 % 9GA512P7M1 9GA524P7M1 46
DC Fan 6mm sq. General Specifications San Ace 6 15mm thick (GA type), 15mm thick 2mm thick (GA type), 2mm thick 25mm thick (S type), 25mm thick (G type) 25mm thick, 25mm thick (San Cooler) 38mm thick (GA type), 38mm thick (GV type) 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 6 6 15mm Mass 5g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 1.16 1.92 5,9.68 24 8.32 38 9GA612P7G1.5.6 1,5.17 6. 5.2.2 1 4,/6 12 1.2 to 13.8 2 to 7 1.1 1.2 4,9.56 19.7 55.6.223 34 (7,/4 ) 9GA612P7H1.3.36 1,3.15 5.3 3.9.15 8 Note: Expected life at 4 ambient is just reference value. PWM Model No. The following nos. have pulse sensors and ribs. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 9GA612G71.16 1.92 5,9.68 24 8.32 38 9GA612H71.1 1.2 4,9.56 19.7 55.6.223 34 12 6 to 13.8 9GA612M71.8.96 3,9.45 15.9 35.3.142 28 9GA612L71.3.36 2,8.31 1.9 18.72 17 Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. PWM Control 2 to 7 4,/6 (7,/4 ) 6, Dimensions Unit : mm (With PWM speed control function With pulse sensor) 4-4.5.3 Mounting Hole (3) 15.5 (3) 6.5 5.3 Lead Wire AWG28 UL17 +5 3 (1) 5.3 6.5 Air Flow Direction Rotating Direction 49
Reference dimension of mounting holes and vent opening Unit : mm 58 5.3 4-4.7 DC Fan 6mm 63 6.5 1 5.3 5.3 58 Options Unit : mm Finger guards Model 19-139E 19-139H 53 Color Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 4 1 Resin finger guards Model 19-13G 6.5 1 5.3 6.5.5 4-2.5 4-4.3.3 64 1 5.3 9.5.5 4-4.3.3 64 1 5.3 75.5 62 7.7 Resin filter kits Model 19-13F13 13PPI 19-13F2 2PPI 19-13F3 3PPI 19-13F4 4PPI 4-1.5 4-2.5 5
DC Fan 6mm sq. San Ace 6 6 6 15mm Mass 5g Air Flow - Static Pressure Characteristics PWM With PWM speed control function With pulse sensor.45 11.4 1.35 9 8.3 7.25 6.2 5.15 4 3.1 2.5 1 % DC 1% 5%.1.2.3.4.5.6.7.8 5 1 15 2 25 Air Flow 9GA612P7G1 3 With PWM speed control function With pulse sensor.3.25.2.15.1.5 8 7 6 5 4 3 2 1 % 5% DC 1%.1.2.3.4.5.6.7 5 1 15 2 25 Air Flow 9GA612P7H1 Operating Voltage Range With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor With pulse sensor PWM 1.45 1 1 11 8.2 5.4 1.3 7.35 9 13.8V.25 4 8 6 13.8V.15.3 13.8V 7.2 5.25 3 6.15 4.1.2 5 1.2V 3 1.2V 2.15 4 3.1.1 2.5 2 1 6V.5.5 1 1.1.2.3.4.5.6.7.8 m.1.2.3.4.5.6.7 3 /min.1.2.3.4.5 5 1 15 2 25 3 5 1 15 2 25 2 4 6 8 1 12 14 16 18 PWM 1 9GA612P7G1 9GA612P7H1 9GA612M71 PWM Duty - Speed Characteristics Example With PWM speed control function With pulse sensor min Rotation Speed min 6, Voltage DC DC 5,9min -1 5, 4, 3, 2, 1,5min -1 1, With PWM speed control function With pulse sensor min Rotation Speed min Voltage DC DC PWM 5, 4,9min -1 4, 3, 2, 1,3min -1 1, 1 % 9GA612P7G1 1 % 9GA612P7H1 51
DC Fan 6mm.12.1.8.6.4.2 With pulse sensor With pulse sensor With pulse sensor 3 11 8.4 1.3 25 7 13.8V.35 9.25 2.3 8 13.8V 6 7.2.25 5 6 13.8V 15.2 5.15 4 1.15 4 3.1.1 3 6V 2 6V 5 6V 2.5.5 1 1.5.1.15.2.25.3.35.4.1.2.3.4.5.6.7.8.1.2.3.4.5.6.7 2 4 6 8 1 12 14 5 1 15 2 25 5 1 15 2 9GA612L71 9GA612G71 9GA612H71 52
DC Fan 6mm sq. General Specifications San Ace 6 15mm thick (GA type), 15mm thick 2mm thick (GA type), 2mm thick 25mm thick (S type), 25mm thick (G type) 25mm thick, 25mm thick (San Cooler) 38mm thick (GA type), 38mm thick (GV type) 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 6 6 2mm Mass 7g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) Model No. V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 9GA612P6G1 1.26 3.12 6,85.88 31.1 125.5 43 12 1.8 to 13.2 9GA612P6S1 1.15 1.8 5,5.7 24.7 81.33 36 2 to 7 4,/6 9GA624P6G1 1.12 2.88 6,85.88 31.1 125.5 43 (7,/4 ) 24 21.6 to 26.4 9GA624P6S1 1.7 1.68 5,5.7 24.7 81.33 36 Note 1: Fan does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Model No. The following nos. have pulse sensors and ribs. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V A W min m³/min Pa inchh ² O db(a) h 9GA612H61.9 1.8 4,1.52 18.4 45.18 29 12 1.8 to 13.2 9GA612M61.5.6 2,7.34 12. 2.8 18 9GA624H61.4.96 4,1.52 18.4 45.18 29 24 21.6 to 26.4 9GA624M61.3.72 2,7.34 12. 2.8 18 Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. PWM Control PWM 2 to 7 6, Dimensions Unit : mm (With PWM speed control function With pulse sensor) 4 4.5.3 Mounting Hole Lead Wire AWG26 UL17 6.5 5.3 +5 3 (1) 5.3 6.5 Rotating Direction (4) (4) 2.5 Air Flow Direction 55
Reference dimension of mounting holes and vent opening Unit : mm 4-4.5 58 5.3 DC Fan 6mm 63 6.5 1 5.3 5.3 58 Options Unit : mm Finger guards Model 19-139E 19-139H 53 Color Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 4 1 Resin finger guards Model 19-13G 6.5 1 5.3 6.5.5 4-2.5 4-4.3.3 64 1 5.3 9.5.5 4-4.3.3 64 1 5.3 75.5 62 7.7 Resin filter kits Model 19-13F13 13PPI 19-13F2 2PPI 19-13F3 3PPI 19-13F4 4PPI 4-1.5 4-2.5 56
DC Fan 6mm sq. San Ace 6 6 6 2mm Mass 7g Air Flow - Static Pressure Characteristics PWM With PWM speed control function With pulse sensor 16.6 14.5 12.4 1.3.2.1 8 6 4 2 DC 1% 5%.2.4.6.8 1. 5 1 15 2 25 3 35 Air Flow 9GA612P6G1 With PWM speed control function With pulse sensor.4 1.3.2.1 8 6 4 2 DC 1% 5%.1.2.3.4.5.6.7.8 5 1 15 2 25 Air Flow 9GA612P6S1 With PWM speed control function With pulse sensor 16.6 14.5 12.4 1.3 8 6.2 4.1 2 5%.2.4 DC24V 1%.6.8 1. 5 1 15 2 25 3 35 Air Flow 9GA624P6G1 Operating Voltage Range With PWM speed control function With pulse sensor 16.6 14.5 12.4 1.3.2.1 8 6 4 2 PWM 1 1 13.2V 1.8V.2.4.6.8 1. 5 1 15 2 25 3 35 Air Flow 9GA612P6G1 With PWM speed control function With pulse sensor.4 1.3.2.1 8 6 4 2 PWM 1 1 13.2V 1.8V.1.2.3.4.5.6.7 5 1 15 2 25 9GA612P6S1.8 With PWM speed control function With pulse sensor 16.6 14.5 12.4 1.3.2.1 8 6 4 2 PWM 1 1 26.4V 24V 21.6V.2.4.6.8 1. 5 1 15 2 25 3 35 Air Flow 9GA624P6G1 PWM Duty - Speed Characteristics Example With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor Voltage DC DC Voltage DC DC Voltage 24V DC24V DC PWM 8, 6, 8, 7, 6,85min -1 5,5min -1 7, 5, 6, 6, 6,85min -1 5, 4, 5, 4, 3, 4, 3, 2, 2, 3, 2, 1, 1, 1, 1 1 1 % % % Rotation min Speed min Rotation min Speed min 9GA612P6G1 9GA612P6S1 9GA624P6G1 Rotation min Speed min 57
DC Fan 6mm With PWM speed control function With pulse sensor.4 1 DC24V.3.2.1 8 6 4 2 1% 5%.1.2.3.4.5.6.7.8 5 1 15 2 25 Air Flow 9GA624P6S1 With PWM speed control function With pulse sensor.4 1 PWM 1 1 6 With pulse sensor DC/DC24V.12 3 With pulse sensor DC/DC24V.3.2.1 8 6 4 2 26.4V 24V 21.6V.2.15.1.5 5 4 3 2 1 13.2V / 26.4V / 24V 1.8V / 21.6V.1.8.6.4 25 2 15 1.2 5 13.2V / 26.4V / 24V 1.8V / 21.6V.1.2.3.4.5.6.7 5 1 15 2 25 9GA624P6S1.8.1.2.3.4.5.6 5 1 15 2 Air Flow 9GA612H61 9GA624H61.1.2.3.4 2 4 6 8 1 12 14 9GA612M61 9GA624M61 With PWM speed control function With pulse sensor Rotation min Speed min Voltage 24V DC24V DC PWM 6, 5,5min -1 5, 4, 3, 2, 1, 1 % 9GA624P6S1 58
DC Fan 6mm sq. General Specifications San Ace 6 15mm thick (GA type), 15mm thick 2mm thick (GA type), 2mm thick 25mm thick (S type), 25mm thick (G type) 25mm thick, 25mm thick (San Cooler) 38mm thick (GA type), 38mm thick (GV type) 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 6 6 38mm Mass 13g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 9GA612P1J3 1.8 to 12.6 1 18. 17,5 1.75 62 82 3.3 63 2.1 1.2 4,.4 14 43.17 24 2 to 6 1.95 11.4 14,8 53 6 2.4 59 9GA612P1K3 2.1 1.2 4,.4 14 43.17 24 12 2 to 7 1.55 6.6 11,5 1.15 4 375 52 4,/6 9GA612P1H3 1.8 to 13.2 2.6.72 2,6.27 9.5 2.8 19 (7,/4 ) 9GA612P1K6 1.95 11.4 14,8 53 675 2.7 59.5.6 1,48.134 4.7 8.3.3 16 9GA624P1J3 24 21.6 to 25.2 1.75 18. 17,5 1.75 62 82 3.3 63 2.1 2.4 6,2.63 22 14.42 35 2 to 6 Note 1: 9GA612P1J3 9GA612P1K3 9GA612P1H3, 9GA624P1J3 does not rotate when PWM duty cycle is %. PWM Note 2: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Dimensions Unit : mm (With ribs) 4 4.5.3 Mounting Hole +5 3 (1) 6.5 5.3 Lead Wire AWG24 UL17 5.3 6.5 (4) 38.5 (4) Rotating Direction Air Flow Direction 71
Reference dimension of mounting holes and vent opening Unit : mm 59 5.3 29.7 4-4.5 DC Fan 6mm 62.7 6.5 1 5.3 29.7 5.3 59 Options Unit : mm Finger guards Model 19-139E 19-139H 53 Color Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 4 1 Resin finger guards Model 19-13G 6.5 1 5.3 6.5.5 4-2.5 4-4.3.3 64 1 5.3 9.5.5 4-4.3.3 64 1 5.3 75.5 62 7.7 Resin filter kits Model 19-13F13 13PPI 19-13F2 2PPI 19-13F3 3PPI 19-13F4 4PPI 4-1.5 4-2.5 72
DC Fan 6mm sq. San Ace 6 6 6 38mm Mass 13g Air Flow - Static Pressure Characteristics PWM DC 3.5 9 7 2. 5 3. 8 2.5 6 7 1% 1% 4 2.5 2. 5 6 1% 2. 5 4 3 1. 4 3 2 3 1. 1. 6% 2 6% 2.5 6%.5.5 1 1 2% 1 2% 2%.4.8 1.2 1.6 2..4.8 1.2 1.6.4.8 1.2 1.6 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5 Air Flow 9GA612P1J3 9GA612P1K3 9GA612P1H3 Operating Voltage Range DC DC 3.5 9 8 3. 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 1 12.6V 1.8V 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 1 13.2V.4.8 1.2 1.6 2..4.8 1.2 1.6 2..4.8 1.2 1.6 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 9GA612P1J3 1.8V 9GA612P1K3 Static Pressure 2. 5 4 3 1. 2.5 1 PWM 1 1 13.2V 1.8V 9GA612P1H3 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC 18, 17,5min -1 16, 14, 12, 1, 8, 6, 4, 2, 1 % 9GA612P1J3 Rotation min Speed min 16, 14, 12, 1, Voltage DC DC 14,8min -1 8, 6, 4, 2, 1 % 9GA612P1K3 Rotation min Speed min Voltage DC DC PWM 14, 12, 1, 8, 6, 4, 2, 11,5min -1 1 % 9GA612P1H3 73
DC Fan 6mm 7 2.5 6 1% 2. 5 4 3 1. 2.5 1 5% % DC.4.8 1.2 1.6 1 2 3 4 5 9GA612P1K6 3.5 3. 2.5 2. 1..5 9 8 7 6 5 4 3 2 1 1% 2% 6%.4.8 1.2 1.6 DC 24V 2. 1 2 3 4 5 6 7 9GA624P1J3 7 2.5 6 2. 5 4 3 1. 2.5 1 PWM 1 1 13.2V, 1.8V.4.8 1.2 1.6 1 2 3 4 5 9GA612P1K6 PWM 1 1 3.5 9 8 3. 7 25.2V 2.5 6 24V 2. 5 4 21.6V 3 1. 2.5 1.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 9GA624P1J3 Rotation min Speed min Voltage DC DC PWM 16, 14,8min -1 14, 12, 1, 8, 6, 4, 2, 1,48min -1 1 % 9GA612P1K6 Rotation min Speed min Voltage 24V DC24V DC PWM 18, 17,5min -1 16, 14, 12, 1, 8, 6, 4, 2, 1 % 9GA624P1J3 74
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control (With Storage Temperature 3 to 7 Non-condensing PWM control function) brown 8 8 15mm Mass 65g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) Model No. V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 9GA812P7G1 1.29 3.48 6,1 1.44 5.9 84..34 41 12 1.2 to 13.8 9GA812P7S1 1.17 2.4 5, 1.18 41.7 56.4.23 37 4,/6 2 to 7 9GA824P7G1 1.13 3.12 6,1 1.44 5.9 84..34 41 (7,/4 ) 24 2.4 to 27.6 9GA824P7S1 1.8 1.92 5, 1.18 41.7 56.4.23 37 Note 1: Fan does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Model No. The following nos. have pulse sensors and ribs. Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V A W min m³/min Pa inchh ² O db(a) h 9GA812H71 12 6 to 13.2.9 1.8 3,8.89 31.4 32.6.13 29 9GA824H71 24 12 to 26.4.5 1.2 3,8.89 31.4 32.6.13 29 Note: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Lock Sensor Please inquire as the availability of these functions depend on the model. PWM Control PWM 2 to 7 4,/6 (7,/4 ) Dimensions Unit : mm (With PWM speed control function With pulse sensor) 4-4.5.3 Mounting Hole 8.5 7.3 +5 3 7.3 8.5 Rotating Direction (1) Lead Wire AWG28 UL17 (4) (4) 15.5 Air Flow Direction 81
Reference dimension of mounting holes and vent opening Unit : mm 78.5 7.3 9 4-4.5 7.3 DC Fan 8mm 78.5 Options Unit : mm Finger guards Color Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 82 1 7.3 7.5 4-2.5 4-4.3.3 75 15.5 39.6 88 82 1 7.3 Model 19-49E 19-49H 11.2 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 75 4.3.3 5 1 85.5 1 7.3.5 4-4.3.3 15.5 88 85.5 1 7.3 11.2 4-1.5 4-2.5 82
DC Fan 8mm sq. San Ace 8 8 8 15mm Mass 65g Air Flow - Static Pressure Characteristics PWM With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 DC 1% 5% 8.3 6.2 4.1 2 DC 1% 5% With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 DC 24V 1% 5%.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA812P7G1.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA812P7S1.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA824P7G1 Operating Voltage Range With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 PWM 1 1 13.8V 1.2V With PWM speed control function With pulse sensor 8.3 6.2 4.1 2 PWM 1 1 13.8V 1.2V With PWM speed control function With pulse sensor.5 12.4 1 8.3 6.2 4.1 2 PWM 1 1 27.6V 24V 2.4V.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA812P7G1.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 Air Flow 9GA812P7S1.2.4.6.8 1. 1.2 1.4 1.8 1 2 3 4 5 6 9GA824P7G1 PWM Duty - Speed Characteristics Example With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor With PWM speed control function With pulse sensor Rotation min Speed min 6, Voltage DC DC 6,1min -1 5, 4, 3, 2, 1, Rotation min Speed min Voltage DC DC PWM 6, 5, 5,min -1 4, 3, 2, 1, Rotation min Speed min 6, Voltage 24V DC24V DC 6,1min -1 5, 4, 3, 2, 1, 1 % 9GA812P7G1 1 % 9GA812P7S1 1 % 9GA824P7G1 83
DC Fan 8mm With PWM speed control function With pulse sensor 8.3 DC 24V.2.1 6 4 2 1% 5%.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA824P7S1 With PWM speed control function With pulse sensor 8.3 6.2 4.1 2 PWM 1 1 27.6V 24V 2.4V.2 5 4.15 3.1 2.5 1 With pulse sensor 13.2V/26.4V /24V 6V/.2.4.6.8 1. 1.2 1.4 1 2 3 4 5 9GA824P7S1.2.4.6.8 1. 1 2 3 Air Flow 9GA812H71 9GA824H71 With PWM speed control function With pulse sensor Rotation min Speed min DC24V Voltage 24V DC 6, 5, 5,min -1 4, 3, 2, 1, 1 % 9GA824P7S1 84
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 2mm Mass 8g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) V V cycle Note1) % A W min m³/min Pa inchh ² O db(a) h 4,/6 9GA812P6G1.3 3.6 5,85 1.72 6.78 11.44 45 12 1.2 to 13.8 1 (7,/4 ) 9GA812P6M1.6.72 2,9.84 29.68 27.11 26.5 6,/6 2 to 7 4,/6 9GA824P6G1.15 3.6 5,85 1.72 6.78 11.44 45 24 2.4 to 27.6 1 (7,/4 ) 9GA824P6M1.3.72 2,9.84 29.68 27.11 26.5 6,/6 Note 1: Does not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor Lock Sensor PWM Dimensions Unit : mm 4 4.5.3 Mounting Hole (4) 2.5 (4) Reference dimension of mounting holes and vent opening Unit : mm 7.3 4-4.5 8.5 7.3 +5 3 (1) 78.5 9 7.3 7.3 8.5 Rotating Direction Lead Wire AWG26 UL17 Air Flow Direction 78.5 Options Unit : mm Finger guards Color Model 19-49C Surface treatment Nickel-chrome plating silver 15.5 Outlet side 4.3.3 75 39.6 88 5 1 Model 19-49E 19-49H 15.5 75 Color Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 88 5 1 11.2 11.2 87
Options Unit : mm Resin finger guards Model 19-12G 82 1 7.3 82 1 7.3 7.5 4-2.5 4-4.3.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 85.5 1 7.3 85.5 1 7.3.5 4-4.3.3 DC Fan 8mm 4-1.5 4-2.5 Air Flow - Static Pressure Characteristics PWM 14.5 12.4 1 8.3 6.2 4.1 2 DC /24V 1% 5%.4.8 1.2 1.6 2. 1 2 3 4 5 6 7.16 4 DC /24V.14.12 3.1 1%.8 2.6.4 1 5%.2.2.4.6.8 1. 5 1 15 2 25 3 35 9GA812P6G1 9GA812P6M1 9GA824P6G1 9GA824P6M1 Operating Voltage Range 14 PWM 1 1.5 12 13.8V/27.6V.4 1 /24V 1.2V/2.4V 8.3 6.2 4.1 2.4.8 1.2 1.6 2. 1 2 3 4 5 6 7 Air Flow 9GA812P6G1 9GA824P6G1.16 4.14.12 3.1.8 2 PWM 1 1 13.8V/27.6V /24V 1.2V/2.4V.6.4 1.2.2.4.6.8 1. 5 1 15 2 25 3 35 9GA812P6M1 9GA824P6M1 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC / DC24V / 24V DC 7,5 5, 2,5 5,85min -1 1 % 9GA812P6G1 9GA824P6G1 Rotation min Speed min Voltage DC / DC DC24V / 24V DC PWM 3, 2,9min -1 2, 1, 1 % 9GA812P6M1 9GA824P6M1 88
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 25mm Mass 11g GA type Low Noise Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA812P4J1 1.6 7.2 7,4 2.7 73. 177.6.7 48 25.8.96 2,5.69 24.3 2.2.8 21 9GA812P4G1 12 1.8 to 13.2 1.48 5.76 6,8 1.91 67.4 15.6 45 25.6.72 1,5.42 14.8 7.2.2 17 1.22 2.64 5,2 1.46 5 87.7.35 37 9GA812P4H1 25.6.72 1,6.44 15.5 8.3.3 17 4,/6 2 to 7 1.28 6.72 7,4 2.7 73. 177.6.7 48 (7,/4 ) 9GA824P4J1 25.6 1.44 2,8.78 27.5 25.4.1 23 9GA824P4G1 24 21.6 to 26.4 1.21 5.4 6,8 1.91 67.4 15.6 45 25.4.96 2,1.58 2.4 14.3.5 19 9GA824P4H1 1.1 2.4 5,2 1.46 5 87.7.35 37 25.2.48 1,5.42 14.8 7.2.2 17 Note: Expected life at 4 ambient is just reference value. PWM Available options: Without Sensor Pulse Sensor Please inquire as the availability of these functions depend on the model. Lock Sensor Dimensions Unit : mm (With ribs) 4 4.5.3 Mounting Hole 8.5 7.3 +5 3 (1) 7.3 8.5 Lead Wire AWG26 UL17 (4) 25.2.5 (4) Rotating Direction Air Flow Direction 91
Reference dimension of mounting holes and vent opening Unit : mm 7.3 4-4.5 DC Fan 8mm 9 78.5 7.3 78.5 Options Unit : mm Finger guards Color Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 82 1 7.3 7.5 4-2.5 4-4.3.3 75 15.5 39.6 88 82 1 7.3 Model 19-49E 19-49H 11.2 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 75 4.3.3 5 1 85.5 1 7.3.5 4-4.3.3 15.5 88 85.5 1 7.3 11.2 4-1.5 4-2.5 92
DC Fan 8mm sq. San Ace 8 8 8 25mm Mass 11g Air Flow - Static Pressure Characteristics PWM.8 2.7 18.6 16 14.5 12.4 1.3 8.2 6 4.1 2 25%.5 1. 2. DC 1% 6% 2.5 2 4 6 8 9GA812P4J1.7 DC 18 16.6 14.5 1% 12.4 1.3.2 8 6 6% 4.1 2 25%.5 1. 2. 2.5 m /min 2 4 6 8 9GA812P4G1.4 1.35 9.3 8 7.25 6.2 5.15 4.1 3 2.5 1 DC 1% 25% 6%.5 1. 2. 1 2 3 4 5 6 7 9GA812P4H1 Operating Voltage Range.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 PWM 1 1 13.2V 1. 2. 2 4 6 1.8V 2.5 8 9GA812P4J1 PWM 1 1.7 18 16.6 14.5 13.2V 12.4 1.3 8.2 6 4.1 2.5 1. 1.8V 2. 2.5 2 4 6 8 9GA812P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM 1 1 13.2V 1.8V.5 1. 2. 1 2 3 4 5 6 7 9GA812P4H1 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC 8, 7, 6, 5, 4, 3, 2, 1, 7,4min -1 Rotation min Speed min Voltage DC DC 7, 6, 5, 4, 3, 2, 1, 6,8min -1 Rotation min Speed min Voltage DCDC PWM 7, 6, 5, 4, 3, 2, 1, 5,2min -1 1 % 1 % 1 % 9GA812P4J1 9GA812P4G1 9GA812P4H1 93
DC Fan 8mm.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 1. 2. 2 4 6 DC 24V 1% 6% 25% 9GA824P4J1 2.5 8 Static Pressure.7 18 16.6 14.5 12.4 1.3.2.1 8 6 4 2 DC 24V 1% 6% 25%.5 1. 2. 2.5 2 4 6 8 Air Flow 9GA824P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 25% DC 24V 1% 6%.5 1. 2. 1 2 3 4 5 6 7 9GA824P4H1.8 2.7 18.6 16 14.5 12.4.3.2 1 8 6 4.1 2.5 PWM 1 26.4V 24V 1. 2. 2 4 6 21.6V 2.5 8 9GA824P4J1 PWM 1 1.7 18 16.6 14.5 26.4V 12.4 1 24V.3 8.2 6 4.1 2.5 1. 21.6V 2. 2.5 2 4 6 8 Air Flow 9GA824P4G1.4 1.35.3.25.2.15.1.5 9 8 7 6 5 4 3 2 1 PWM 1 1 26.4V 24V 21.6V.5 1. 2. 1 2 3 4 5 6 7 9GA824P4H1 Rotation min Speed min Voltage 24V DC24V DC 8, 7, 6, 5, 4, 3, 2, 1, 7,4min -1 Rotation min Speed min Voltage 24V DC24V DC 7, 6, 5, 4, 3, 2, 1, 6,8min -1 Rotation min Speed min Voltage 24V DC24V DC PWM 7, 6, 5, 4, 3, 2, 1, 5,2min -1 1 % 9GA824P4J1 1 % 9GA824P4G1 1 % 9GA824P4H1 94
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 32mm Mass 13g GA type High Air Flow Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 1.83 9.96 9,7 2.45 86.5 36 1.45 57 9GA812P2S1.8.96 2,8.71 25.1 3.12 24 1.2 to 13.8 2 to 7 1.59 7.8 8,7 2.2 77.7 294 1.18 54 9GA812P2H1 12.5.6 2,6.66 23.3 26.15 21 4, 1.35 4.2 6,7 1.69 59.6 171.68 47 9GA812P2M1 1.2 to 12.6 2 to 55.4.48 1,4.35 12.3 7.5.3 1 1.42 1.1 9,7 2.45 86.5 36 1.45 57 9GA824P2S1 24 2.4 to 27.6 2 to 7.5 1.2 2,8.71 25.1 3.12 24 PWM Available options: Without Sensor Pulse Sensor Dimensions Unit : mm (With ribs) 8.5 7.3 4-Ø4.5.3 Mounting Hole Lead Wire AWG26 UL143 +5 3 (1) Reference dimension of mounting holes and vent opening Unit : mm 78.5 7.3 9 4-4.5 7.3 7.3 8.5 Rotating Direction (4) (4) 32.5 Air Flow Direction 78.5 Options Unit : mm Finger guards Color Model 19-49C Surface treatment Nickel-chrome plating silver 15.5 Outlet side 4.3.3 75 39.6 88 5 1 Model 19-49E 19-49H 15.5 75 Color Surface treatment Nickel-chrome plating silver Cation electropainting black 4.3.3 88 5 1 11.2 11.2 17
Options Unit : mm Resin finger guards Model 19-12G 82 1 7.3 82 1 7.3 7.5 4-2.5 4-4.3.3 Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 85.5 1 7.3 85.5 1 7.3.5 4-4.3.3 DC Fan 8mm Air Flow - Static Pressure Characteristics PWM 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 5 4 3 2 1 DC /24V 4-1.5 4-2.5 2. 5.8 2 1.8 1.6 4.6 15 1.4 1% 1% 1.2 3 1% 1..4 1.8 2 5% 5% 5%.6.2 5.4 1 % %.2 % 1 2 3 1 2 3 1 2 2 4 6 8 1 2 4 6 8 1 1 2 3 4 5 6 7 Air Flow 9GA812P2S1 9GA824P2S1 Operating Voltage Range PWM 1 1 DC PWM 1 1 13.8V 2. 5.8 2 1.8 13.8V/27.6V 1.6 4 12.6V.6 15 1.4 1.2 3 /24V 1..4 1.8 2 1.2V.6 1.2V.4 1.2 5 1.2V/2.4V.2 1 2 3 m /min 1 2 3 1 2 2 4 6 8 1 2 4 6 8 1 1 2 3 4 5 6 7 Air Flow Air Flow 9GA812P2S1 9GA824P2S1 9GA812P2H1 9GA812P2H1 9GA812P2M1 9GA812P2M1 PWM Duty - Speed Characteristics Example Rotation min Speed min 1, 9, 8, 7, 6, 5, 4, 3, 2, Voltage DC / DC 24V/ 24V DC 9,7min -1 2,8min -1 1, 1 % 9GA812P2S1 9GA824P2S1 Rotation min Speed min 1, 9, 8, 7, 6, 5, 4, 3, 2, Voltage DC DC 8,7min -1 2,6min -1 1, 1 % 9GA812P2H1 Rotation min Speed min Voltage DC DC PWM 1, 9, 8, 7, 6, 5, 4, 6,7min -1 3, 2, 1,4min 1, -1 1 % 9GA812P2M1 18
DC Fan 8mm sq. General Specifications San Ace 8 15mm thick (GA type), 15mm thick, 2mm thick (GA type) 2mm thick, 25mm thick (GA type), 25mm thick (S type) 25mm thick (GV type), 25mm thick 25mm thick (San Cooler), 32mm thick (GA type) 32mm thick, 38mm thick (HV type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 8 8 38mm Mass 16g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note) V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA812P1G61 1 1.2 14.4 1,5 2.85 1.6 48 1.92 6.4.48 2,.51 18. 28.7.11 21 9GA812P1S61 12 1.8 to 13.2 1.94 11.28 9,55 2.6 91.8 48 1.93 59.1 1.2 2,9.74 26.1 6.24 27 9GA812P1H61 1.6 7.2 8,25 2.25 79.4 38 3 55 4,/6 2 to 7.8.96 2,5.64 22.6 45.18 24 (7,/4 ) 1.47 11.28 9,55 2.6 91.8 48 1.93 59 9GA824P1S61.6 1.44 2,9.74 26.1 6.24 27 24 2.4 to 27.6 1.3 7.2 8,25 2.25 79.4 38 3 55 9GA824P1H61.5 1.2 2,5.64 22.6 45.18 24 Note: Expected life at 4 ambient is just reference value. PWM Available options: Without Sensor Pulse Sensor Dimensions Unit : mm (With ribs) 4-4.5.3 Mounting Hole 8.5 7.3 +5 3 (1) 7.3 8.5 Lead Wire AWG26 UL143 (4) (4) 38.5 Rotating Direction Air Flow Direction 113
Reference dimension of mounting holes and vent opening Unit : mm 4-4.5 DC Fan 8mm 9 78.5 7.3 7.3 78.5 Options Unit : mm Finger guards Color Model 19-49C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-12G Outlet side 4.3.3 5 1 82 1 7.3 7.5 4-2.5 4-4.3.3 75 15.5 39.6 88 82 1 7.3 Model 19-49E 19-49H 11.2 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-12F13 13PPI 19-12F2 2PPI 19-12F3 3PPI 19-12F4 4PPI 75 4.3.3 5 1 85.5 1 7.3.5 4-4.3.3 15.5 88 85.5 1 7.3 11.2 4-1.5 4-2.5 114
DC Fan 8mm sq. San Ace 8 8 8 38mm Mass 16g Air Flow - Static Pressure Characteristics PWM DC 2.4 6 2.2 2. 5 1.8 1% 1.6 4 1.4 1.2 3 1..8 2.6 5%.4 1.2 % 1 2 3 2 4 6 8 1 9GA812P1G61 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % DC 1% 5% 1 2 3 2 4 6 8 1 9GA812P1S61 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 % DC 1% 5% 1 2 3 2 4 6 8 1 9GA812P1H61 Operating Voltage Range 2.4 6 PWM 1 1 2.2 2. 1.8 5 13.2V 1.6 4 1.4 1.8V 1.2 1. 3.8 2.6.4 1.2 1 2 3 2 4 6 8 1 9GA812P1G61 2.4 6 2.2 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4 1.2 PWM 1 1 1 13.2V 1.8V 2 2 4 6 8 9GA812P1S61 1 3 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6 1.4.2 PWM 1 1 1 13.2V 1.8V 2 4 6 8 1 9GA812P1H61 2 3 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC 11, 1, 1,5min -1 9, 8, 7, 6, 5, 4, 3, 2, 2,min -1 1, 1 % 9GA812P1G61 Rotation min Speed min Voltage DC / DC24V / 24V DC 1, 9,55min -1 8, 6, 4, 2,9min -1 2, 1 % 9GA812P1S61 9GA824P1S61 Rotation min Speed min Voltage DC / DC24V / 24V DC 1, 8, 6, 4, 2, 2,5min -1 8,25min -1 1 % 9GA812P1H61 9GA824P1H61 115
DC Fan 8mm 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 6 5 4 3 2 1 % DC 24V 1% 5% 1 2 3 2 4 6 8 1 9GA824P1S61 Static Pressure 2. 1.8 1.6 1.4 1.2 5 4 3 1..8 2.6.4 1.2 % DC 24V 1% 5% 1 2 3 2 4 6 8 1 9GA824P1H61 Static Pressure 2.4 6 2.2 2. 5 1.8 1.6 1.4 1.2 1..8.6.4.2 4 3 2 1 PWM 1 1 1 27.6V 24V 2.4V 2 4 6 8 1 Air Flow 9GA824P1S61 2 3 2. 5 1.8 1.6 4 1.4 1.2 3 1..8 2.6.4.2 1 PWM 1 1 1 27.6V 24V 2.4V 2 4 6 8 1 9GA824P1H61 2 3 116
DC Fan 92mm sq. San Ace 92 25mm thick (GA type), 25mm thick (S type) 25mm thick, 25mm thick (San Cooler) 32mm thick (G type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications L1:Survival rate:9% at 6, rated voltage, and continuously run in a free air state Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 92 92 25mm Mass 125g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. Model No. Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life V V cycle % A W min m³/min Pa inchh ² O db(a) h 9GA912P4J3 1.39 4.68 5, 2.2 77.7 15.42 43.6.72 1,5.66 23.3 9.5.4 14 9GA912P4G3 12 1.2 to 13.8 1.28 3.36 4,4 1.93 68.2 81.33 39.6.72 1,5.66 23.3 9.5.4 14 9GA912P4S3 1.2 2.4 3,8 1.67 59. 6.6.24 35.6.72 1,5.66 23.3 9.5.4 14 9GA924P4J3 1.2 4.8 5, 2.2 77.7 15.42 43.4.96 1,5.66 23.3 9.5.4 14 2 to 7 6, 9GA924P4G3 24 2.4 to 27.6 1.15 3.6 4,4 1.93 68.2 81.33 39.4.96 1,5.66 23.3 9.5.4 14 9GA924P4S3 1.12 2.88 3,8 1.67 59. 6.6.24 35.4.96 1,5.66 23.3 9.5.4 14 PWM Available options: Without Sensor Pulse Sensor Dimensions Unit : mm 4-4.5.3 Mounting Hole With ribs 92.5 82.5.3 Lead Wire AWG26 UL17 5 3 82.5.3 92.5 Rotating Direction 1 4 25.2.5 4 Air Flow Direction 123
Reference dimension of mounting holes and vent opening Unit : mm Inlet side Outlet side 9.5 9.5 4-4.5 4-4.5 97 9.5 82.5.3 9.5 18 82.5.3 DC Fan 92mm 82.5.3 82.5.3 Options Unit : mm Finger guards Color Model 19-99C Surface treatment Nickel-chrome plating silver Resin finger guards Model 19-11G Outlet side 4.3.3 5 1 92 1 82.5.3 7.5 4-2.5 4-4.3.3.5 12.5 39.8 87 99 92 1 82.5.3 116.6 Model 19-99E 19-99H 96.5 1.5 82.5.3 4-4.3.3 96.5 1 82.5.3 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 19-11F13 13PPI 19-11F2 2PPI 19-11F3 3PPI 19-11F4 4PPI 4.3.3 5 1 12.5.5 87 99 91 116.6 4-9.5.5 4-2.5 124
DC Fan 92mm sq. San Ace 92 92 92 25mm Mass 125g Air Flow - Static Pressure Characteristics PWM 12.4 1.3.2.1 8 6 4 2 DC 1% 5% %.4.3.2.1 1 8 6 4 2 DC 1% 5% %.3.2.1 8 6 4 2 DC 1% 5% %.5 1 2 2.5.5 1 2.5 1 2 2 4 6 8 2 4 6 2 4 6 Air Flow Air Flow Air Flow 9GA912P4J3 9GA912P4G3 9GA912P4S3 Operating Voltage Range PWM 1 1 PWM 1 1 PWM 1 1 14.4 1 8.3.5 12 13.8V 8 13.8V 13.8V.4.3 1 6 6.2.3 8 1.2V.2 1.2V 4 1.2V 6 4.2.1 4.1 2 2.1 2.5 1 2 2.5 m.5 1 2 2.5.5 1 2 3 /min 2 4 6 8 2 4 6 8 2 4 6 Air Flow Air Flow Air Flow 9GA912P4J3 9GA912P4G3 9GA912P4S3 PWM Duty - Speed Characteristics Example Rotation min Speed min Voltage DC DC 5, 5,min -1 4, 3, 2, 1,5min -1 1, Rotation min Speed min Voltage DC DC PWM 5, 4, 3, 2, 1,5min -1 1, 4,4min -1 Rotation min Speed min Voltage DC DC PWM 5, 4, 3, 2, 1,5min -1 1, 3,8min -1 1 % 9GA912P4J3 1 % 9GA912P4G3 1 % 9GA912P4S3 125
DC Fan 92mm 12.4 1.3.2.1 8 6 4 2 DC 24V 1% 5% %.4.3.2.1 1 8 6 4 2 DC24V 1% 5% %.3.2.1 8 6 4 2 DC24V 1% 5% %.5 1 2 2.5.5 1 2.5 1 2 2 4 6 8 2 4 6 2 4 6 Air Flow Air Flow Air Flow 9GA924P4J3 9GA924P4G3 9GA924P4S3 PWM 1 1 PWM 1 1 PWM 1 14.4 1 8.3.5 12 27.6V 8 27.6V 27.6V.4.3 1 6 24V 24V 6.2 24V.3 8 2.4V.2 2.4V 4 2.4V 6 4.2.1 4.1 2 2.1 2.5 1 2 2.5 m.5 1 2 2.5.5 1 2 3 /min 2 4 6 8 2 4 6 8 2 4 6 Air Flow Air Flow Air Flow 9GA924P4J3 9GA924P4G3 9GA924P4S3 Rotation min Speed min Voltage DC24V DC24V 5, 5,min -1 4, 3, 2, 1,5min -1 1, Rotation min Speed min Voltage DC24V DC24V PWM 5, 4, 3, 2, 1,5min -1 1, 4,4min -1 Rotation min Speed min Voltage DC24V DC24V PWM 5, 4, 3, 2, 1,5min -1 1, 3,8min -1 1 % 9GA924P4J3 1 % 9GA924P4G3 1 % 9GA924P4S3 126
DC Fan 92mm sq. San Ace 92 25mm thick (GA type), 25mm thick (S type) 25mm thick, 25mm thick (San Cooler) 32mm thick (G type), 38mm thick (GA type) 38mm thick (GV type), 38mm thick (G type) General Specifications Material Frame: Plastics (Flammability: UL94V-), Impeller: Plastics (Flammability: UL94V-) Expected Life Refer to specifications (L1: Survival rate: 9% at 6, rated voltage, and continuously run in a free air state) Lead Wire red black Sensor yellow Control brown Storage Temperature 3 to 7 Non-condensing 92 92 38mm Mass 24g GA type Low Power Consumption Fan Specifications The following nos. have PWM controls, pulse sensors, and ribs. For ribless, append "1" to the model no. (9GA948P1H3 is with ribs only) Rated Voltage Operating Voltage Range PWM duty Rated Current Rated Input Rated Speed Max. Air Flow Max. Static Pressure SPL Operating Temperature Expected Life Note2) Model No. V V cycle % A W min m³/min Pa inchh ² O db(a) h 1 2.1 25.2 9,7 4. 141 5 2.1 63 9GA912P1H3 12 1.2 to 13.8 4,/6.16 1.92 2,5.97 34.3 33..13 29 2 to 7 (7,/4 ) 9GA948P1H3 Note1) 48 4.8 to 55.2 1.55 26.4 9,7 4. 141 5 2.1 63 Note 1: Rated voltage 48V fans do not rotate when PWM duty cycle is %. Note 2: Expected life at 4 ambient is just reference value. Available options: Without Sensor Pulse Sensor PWM Dimensions Unit : mm (With ribs) 4-4.5.3 Mounting Hole Lead Wire AWG24 UL143 92.5 82.5.3 3 +3 (1) 82.5.3 92.5 (4) 38.5 (4) Rotating Direction Air Flow Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side Outlet side 82.5.3 4-4.5 82.5.3 4-4.5 9.5 13 82.5.3 9.5 18 82.5.3 9.5 9.5 135