Development of Isotropic Bonded Magnets with (BH)max of 120 kj/m3 Shinya Sakurada, Akihiko Tsutai and Tomohisa Arai 1 Corporate Research & Development

** Department of Materials Science and Engineering, University of California, Los Angeles, CA 90025, USA) Preparation of Magnetopulmbite Type Ferrite

** Department of Materials Science and Engineering, University of California, Los Angeles, CA 90025, USA) Preparation of Magnetopulmbite Type Ferrite Thin Films by Dip-Coating Method and Magnetic Properties

渡辺(2309)_渡辺(2309)

[ 29 p. 241-247 (2011)] ** *** ** ** Development of a nickel-based filler metal containing a small amount of silicon by WATANABE Takehiko, WAKATSUKI Ken, YANAGISAWA Atsusi and SASAKI Tomohiro Authors tried

JMSJ

J. Magn. Soc. Jpn., 30, 151-156 (2006) (Paper) Magnetic Properties of High Coercivity Melt-Spun Didymium-Fe-Co-Nb-Y-B System Ribbons and Their Bonded Magnets H. Yamamoto, K. Furusawa, and N. Miyashita

Table 1. Shape and smelting properties of chrome ores as delivered. Table 2. Chemical composition of chrome ores (%). Table 3. Chemical composition of

UDC 669.263.1: 669.046.462 The Reduction Process and Reducibility of Chromite with Carbon Hiroshi G. KATAYAMA and Akihiko TANAKA Synopsis: In the present work, various chrome ores and relatively pure chromites

Rate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been s

Rate of Oxidation of Liquid Iron by Pure Oxygen Shiro BAN-YA and Jae-Dong SHIM Synopsis: The rate of oxidation of liquid iron by oxygen gas has been studied using a volume constant technique. The process

The Phase Behavior of Monooleoylglycerol-Water Systems Mivoshi Oil & Fat Co.. Ltd. Faculty of Science and Technology, Science University of Tokyo Inst

The Phase Behavior of Monooleoylglycerol-Water Systems Mivoshi Oil & Fat Co.. Ltd. Faculty of Science and Technology, Science University of Tokyo Institute of Colloid and Interface Science, Science University

T05_Nd-Fe-B磁石.indd

Influence of Intergranular Grain Boundary Phases on Coercivity in Nd-Fe-B-based Magnets Takeshi Nishiuchi Teruo Kohashi Isao Kitagawa Akira Sugawara Hiroyuki Yamamoto To determine how to increase the coercivity

Mikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization

Mikio Yamamoto: Dynamical Measurement of the E-effect in Iron-Cobalt Alloys. The AE-effect (change in Young's modulus of elasticity with magnetization) in the annealed state of iron-cobalt alloys has been

磁気測定によるオーステンパ ダクタイル鋳鉄の残留オーステナイト定量

33 Non-destructive Measurement of Retained Austenite Content in Austempered Ductile Iron Yoshio Kato, Sen-ichi Yamada, Takayuki Kato, Takeshi Uno Austempered Ductile Iron (ADI) 100kg/mm 2 10 ADI 10 X ADI

特-7.indd

Mechanical Properties and Weldability of Turbine Impeller Materials for High Temperature Exhaust Gas Turbocharger 1 000 1 050 246 IN100 The increase in environmental awareness in recent years has led to

Table 1. Reluctance equalization design. Fig. 2. Voltage vector of LSynRM. Fig. 4. Analytical model. Table 2. Specifications of analytical models. Fig

Mover Design and Performance Analysis of Linear Synchronous Reluctance Motor with Multi-flux Barrier Masayuki Sanada, Member, Mitsutoshi Asano, Student Member, Shigeo Morimoto, Member, Yoji Takeda, Member

75 unit: mm Fig. Structure of model three-phase stacked transformer cores (a) Alternate-lap joint (b) Step-lap joint 3 4)

3 * 35 (3), 7 Analysis of Local Magnetic Properties and Acoustic Noise in Three-Phase Stacked Transformer Core Model Masayoshi Ishida Kenichi Sadahiro Seiji Okabe 3.7 T 5 Hz..4 3 Synopsis: Methods of local

Fig.1 A location map for the continental ultradeep scientific drilling operations.

Application of a Synthetic Smectite to the Ultradeep Scientific Drilling Operations Makoto KOGA Nitchitsu Co., Ltd. Resources Development Devision, Powder Technological Laboratory 351-1 Kamitano, Arakawa-mura,

Al-Si系粉末合金の超塑性

Superplasticity of Al-Si P/M Alloys Satoru Ishihara, Mikio Kondoh, Kazuhiko Itoh Al-17Si-4.5Cu-0.5Mg-(06)Fe-(02)Mm ( Mm : ) (i) (ii) Si(iii) Fe (iv) Mm Al-17Si-4.5Cu-0.5Mg500 10 2 s 1 520 110 1 s 1 Si

no15

Development of High Performance Catalyst Temperature Sensor for NOx Catalyst Control Atsushi KURANO Kaoru KUZUOKA Sotoo TAKAHASHI Itsuhei OGATA In order to meet each countrys low emission vehicle regulations

Fig. 1. Schematic drawing of testing system. 71 ( 1 )

1850 UDC 669.162.283 : 669.162.263.24/. 25 Testing Method of High Temperature Properties of Blast Furnace Burdens Yojiro YAMAOKA, Hirohisa HOTTA, and Shuji KAJIKAWA Synopsis : Regarding the reduction under

日立金属技報　Vol.34

Influence of Misorientation Angle between Adjacent Grains on Magnetization Reversal in Nd-Fe-B Sintered Magnet Tomohito Maki Rintaro Ishii Mitsutoshi Natsumeda Takeshi Nishiuchi Ryo Uchikoshi Masaaki Takezawa

weak ferromagnetism observed on Shimotokuyama and Ayumikotan natural crystals behaves as pre dicted by Dzyaloshinsky and Moriya, while Wagasennin and

Magnetic Behavior of a-fe2o3, I. Origin of Weak Ferromagnetism and Magnetic Characteristics Masako IWATA (The Research Institute for Iron, Steel and Other Metals, Tohoku University, Katahiracho, Sendai)

Table 2 C, Al and Nb contents of samples (%) Table 3 C, Al and Nb contents of samples (%) Table 4 C, Al and Nb contents of samples (%) 6

Study on the Weldability of Ni Base Superalloy (Part 7) Improvement of Hot Crack Sensitivity of Inconel 713C and its Mechanical Properties by Hiroshi Ikawa, Shigeo Shin, Yoshikuni Nakao, Haruo Yawata and

資源と素材

(Shigen to Sozai) Vol.116 p. 285 290 (2000) 共存硫酸塩を含む強酸性 MnSO 4 溶液中のオゾン酸化によって生成した沈殿の X 線回折および放電特性 * 西村忠久 1 梅津良昭 2 X-ray Diffraction and Discharge Behavior of Precipitates Produced by Ozone Oxidation in

Evaluation of Anisotropy and Preferred Orientation of Carbon and Graphite Materials Yoshihiro Hishiyama Fig.1 Diffraction condition in Fourier space.

Evaluation of Anisotropy and Preferred Orientation of Carbon and Graphite Materials Yoshihiro Hishiyama Fig.1 Diffraction condition in Fourier space. Corresponding Author, E-mail: yhishiya@eng.musashi-tech.ac.jp

Table 1. Chemical composition of Fe203 and SrCO3 used for experiment. Fig. 1. Process of preparion of the specimen.

Influence of Addition of Some Oxides on the Magnetic Properties of the Strontium Ferrite Magnets Takeshi Anbo, Takahiro Motone, Takashi Furuya and Koichi Sasaki Synopsis Recently high coercivity ferrite

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed

Continuous Cooling Transformation Diagrams for Welding of Mn-Si Type 2H Steels. Harujiro Sekiguchi and Michio Inagaki Synopsis: The authors performed a series of researches on continuous cooling transformation

Table 1 Properties of parent coals used Ebenezer, Massel Buluck ; Australia, Datong; China Table 2 Properties of Various chars CY char: Captured char

Table 1 Properties of parent coals used Ebenezer, Massel Buluck ; Australia, Datong; China Table 2 Properties of Various chars CY char: Captured char by cyclone char: Carbonized char at 1273 K 気流 層 石 炭

X X 1. 1 X 2 X 195 3, 4 Ungár modified Williamson-Hall/Warren-Averbach 5-7 modified modified Rietveld Convolutional Multiple Whole Profile CMWP 8 CMWP

X X a a b b c Characterization of dislocation evolution during work hardening of stainless steels by using XRD line-profile analysis Tomoaki KATO a, Shigeo SATO a, Yoichi SAITO b, Hidekazu TODOROKI b and

研究成果報告書

., SUS34 Inconel6, Cr,.,, Cr,. Cr Cr,., Cr,,,.,,,,.,.,,,.,,.,,., SUS34, Inconel6,. (). CoZrNb, -2 m.,., 9. Cu, 2 m. SUS34, Inconel6 SUS34, Inconel6, 5mm mmmm.,,,. (2) (HP8752A).,. - MHz, -2 dbm.,. (3)

R927清水信彦様.indd

Special Issue CFRP 455-8502 9 1 Development Status of Carbon Fiber Reinforced Plastics Nobuhiko SHIMIZU Automotive Center, Toray Industries, Inc., 9-1 Oe-cho, Minato-ku, Nagoya, Aichi 455-8502 Received

* * 2

* * Study on Fire Resistance of Reinforced Concrete Columns with Ultra High Strength Material Munehiro UMEMOTO * Shigemi KIKUTA * The reinforced concrete column made with the high-strength concrete has

Table 1. St-VAc blockcopolymers Table 2. Stability of dispersion of blockcopolymers in unsaturated polyester

97 Table 1. St-VAc blockcopolymers Table 2. Stability of dispersion of blockcopolymers in unsaturated polyester (a) (b) (c) Fig. 1. Phase reversions of poly (St-b-VAc) in unsaturated polyester. Fig. 2.

Effect of Impurities on the Secondary Recrystallization in Silicon Iron Takashi MATSUOKA Synopsis: An investigation has been made on the effects:of im

Effect of Impurities on the Secondary Recrystallization in Silicon Iron Takashi MATSUOKA Synopsis: An investigation has been made on the effects:of impurities on the development of (110) [001] secondary

Fig. ph Si-O-Na H O Si- Na OH Si-O-Si OH Si-O Si-OH Si-O-Si Si-O Si-O Si-OH Si-OH Si-O-Si H O 6

NMR ESR NMR 5 Fig. ph Si-O-Na H O Si- Na OH Si-O-Si OH Si-O Si-OH Si-O-Si Si-O Si-O Si-OH Si-OH Si-O-Si H O 6 Fig. (a) Na O-B -Si Na O-B Si Fig. (b) Na O-CaO-SiO Na O-CaO-B -Si. Na O-. CaO-. Si -. Al O

Fundamental Study on the SOX Gas Sensor Utilizing Beta-Alumina with Sputtered Praseodymium Oxide Thin Films by Shinya YAO1*, Kenji MIYAGAWA1, Shigeru

Fundamental Study on the SOX Gas Sensor Utilizing Beta-Alumina with Sputtered Praseodymium Oxide Thin Films by Shinya YAO1*, Kenji MIYAGAWA1, Shigeru IIJIMA2 and Zensaku KOZUKA1 1. Faculty of Engineering,

Fig. 3 Flow diagram of image processing. Black rectangle in the photo indicates the processing area (128 x 32 pixels).

Fig. 1 The scheme of glottal area as a function of time Fig. 3 Flow diagram of image processing. Black rectangle in the photo indicates the processing area (128 x 32 pixels). Fig, 4 Parametric representation

Fig. 1 Sampling positions from the ingot. Table 2 Chemical compositions of base metal (%) Fig. 2 (unit: mm) Shape and size of fatigue test specimen. T

Friction welding of ADC 12 aluminum alloy diecastings Kazuyoshi KATO* and Hiroshi TOKISUE* Both squeeze and gravity castings of ADC 12 aluminum alloy were friction-welded, using a brake type welding machine.

第122号(A4、E)(4C)/3 宇野ほか

trans Development of high performance heat resistant transparent polyimides based on trans-,,, -cyclopentanetetracarboxylic dianhydride Takaaki Uno Takashi Okada Igor Rozhanskii Toshimitsu Kikuchi Kohei

X線分析の進歩36 別刷

X X X-Ray Fluorescence Analysis on Environmental Standard Reference Materials with a Dry Battery X-Ray Generator Hideshi ISHII, Hiroya MIYAUCHI, Tadashi HIOKI and Jun KAWAI Copyright The Discussion Group

Table 1. Main specifications of VAD plant. Fig. 2. Typical operating pattern of low alloy steel.

UDC 669. 184. 244. 66-251: 669. 046. 554-982 On the Operations of LD-VAD Process and Product Qualities Takaharu MORIYA and Masanori TAWARA Synopsis: VAD (Vacuum Arc Degassing) plant is characterized by

1. Precise Determination of BaAl2O4 Cell and Certification of the Formation of Iron Bearing Solid Solution. By Hiroshi UCHIKAWA and Koichi TSUKIYAMA (

1. Precise Determination of BaAl2O4 Cell and Certification of the Formation of Iron Bearing Solid Solution. By Hiroshi UCHIKAWA and Koichi TSUKIYAMA (Central Research Laboratory, Onoda Cement Co., Ltd.,

Fig.2 Optical-microscope image of the Y face-cross sec- tion of the bulk domain structure of a 0.4-mm-thick MgO-LiNbO3 crystal after chemical etching.

Blue EGreen Solid State Lasers Using MgO-LiNbO3 Periodic Domain Inverted Bulk Crystal and Their Applications Koji KAMIYAMA, Yoji OKAZAKI, and Akinori HARADA Fuji Photo Film. Co., Ltd., Miyanodai Technology

Key Words: average behavior, upper and lower bounds, Mori-Tanaka theory, composites, polycrystals

Key Words: average behavior, upper and lower bounds, Mori-Tanaka theory, composites, polycrystals (Q)1=C1(E)1, (0)2=C2(E)2 (4) QQQ= fi(o)1+f2(2+(1-fi-f2)(o)m E=flIE1+12(6)2+(1-fl-f2)(E)D (5a) (5b) (E)i=1E/D+-y,

J. Jpn. Inst. Light Met. 65(6): 224-228 (2015)

65 62015 224 228 ** Journal of The Japan Institute of Light Metals, Vol. 65, No. 6 (2015), 224 228 2015 The Japan Institute of Light Metals Investigation of heat flow behavior on die-casting core pin with

untitled

254nm UV TiO 2 20nm :Sr 5 Ta 4 O 15 3 4 KEY-1 KEY-2 (Ti,Nb,Ta) 5 KEY-1 KEY-2 6 7 NiO/ Sr 2 Ta 2 O 7 mmol h -1 g -1 20 15 10 5 H 2 O 2 H 2 O 2 0 0 2 4 6 8 10 12 NiO/Sr 2 Ta 2 O 7 The synthesis of photocatalysts

スライド 1

2015 年 3 月 5 日 18:00 於 : 仙台国際ホテル Nd-Fe-B 薄膜における / 界面組織と保磁力メカニズム 東北大学大学院工学研究科知能デバイス材料学専攻 助教松浦昌志 国内生産金額 ( 億円 ) 研究背景 - Nd-Fe-B 系焼結磁石 - 磁石の国内生産額推移 [1] 2000 1500 1000 500 0 2004 希土類磁石フェライト磁石合金磁石 2006 2008 year

Development of Analysis Equipment for the Reprocessing Plant using Microchips Microchip, Analysis, Reprocessing, Thermal Lens, Uranium, Plutonium Development of Analysis Equipment for the Reprocessing

Influence of Material and Thickness of the Specimen to Stress Separation of an Infrared Stress Image Kenji MACHIDA The thickness dependency of the temperature image obtained by an infrared thermography

XFEL/SPring-8

DEVELOPMENT STATUS OF RF SYSTEM OF INJECTOR SECTION FOR XFEL/SPRING-8 Takao Asaka 1,A), Takahiro Inagaki B), Hiroyasu Ego A), Toshiaki Kobayashi A), Kazuaki Togawa B), Shinsuke Suzuki A), Yuji Otake B),

Table 1 Type of polymeric coating materials Fig. 2 Results of suppressive effects of polymeric coating materials on the progress of neutralization of concrete. Table 2 Evaluation of the suppressive effects

Plasticity-Induced Martensitic Transformation in Austenitic Stainless Steels SUS 304 and SUS 316 L at Room and Liquid Nitrogen Temperatures (Quantitat

Plasticity-Induced Martensitic Transformation in Austenitic Stainless Steels SUS 304 and SUS 316 L at Room and Liquid Nitrogen Temperatures (Quantitative Measurement using X-ray Diffraction Method) Yoshifumi

UDC : ' : '24' : '24'26' : : A Study of Condition of Pits Formation and Their Fe

UDC 620.193: 669.15'26-194.3: 669.15'24'26-194.3: 669.15'24'26'28-194.3: 669.141.24: 621.385.833.2 A Study of Condition of Pits Formation and Their Features in Chloride Solution Norio FUKASAKO, Hirokazu

Title インジウムを添加した Ag-Au-Cu-Pd 系合金の物性 Author(s) 時崎, 照彦 ; 服部, 雅之 ; 小田, 豊 Journal 歯科材料 器械, 26(5-6): URL Right Post

Title インジウムを添加した Ag-Au-Cu-Pd 系合金の物性 Author(s) 時崎, 照彦 ; 服部, 雅之 ; 小田, 豊 Journal 歯科材料 器械, 26(5-6): 367-374 URL http://hdl.handle.net/10130/420 Right Posted at the Institutional Resources for Unique Colle

Juntendo Medical Journal

* Department of Health Science Health Sociology Section, Juntendo University School of Health and Sports Science, Chiba, Japan (WHO: Ottawa Charter for Health promotion, 1986.) (WHO: Bangkok Charter

1561 Table 1. Solubility of nitrogen in liquid Fe-Ti alloys. Fig. 1. Solubility of nitrogen in liquid irontitanium alloys at Ž.

1560 Effect of Alloying Element on the Solubility of Nitrogen in Liquid Iron Fujio ISHII and Tasuku FUWA Synopsis: Solubilities of nitrogen in liquid Fe-Ti, Fe-V, Fe-Cr, Fe-Mo, and Fe-W alloys are determined

Structural Studies of Graphite Intercalation Compounds of Fluorine by Transmission Electron Microscopy Tetsuya Isshiki, Fujio Okino, Yoshiyuki Hattori

Structural Studies of Graphite Intercalation Compounds of Fluorine by Transmission Electron Microscopy Tetsuya Isshiki, Fujio Okino, Yoshiyuki Hattori, Shinji Kawasaki and Hidekazu Touhara Department of

& Vol.5 No (Oct. 2015) TV 1,2,a) , Augmented TV TV AR Augmented Reality 3DCG TV Estimation of TV Screen Position and Ro

TV 1,2,a) 1 2 2015 1 26, 2015 5 21 Augmented TV TV AR Augmented Reality 3DCG TV Estimation of TV Screen Position and Rotation Using Mobile Device Hiroyuki Kawakita 1,2,a) Toshio Nakagawa 1 Makoto Sato

Fig. 4. Configuration of fatigue test specimen. Table I. Mechanical property of test materials. Table II. Full scale fatigue test conditions and test

(J. Soc. Mat. Sci., Japan), Vol. 52, No. 11, pp. 1351-1356, Nov. 2003 Fatigue Life Prediction of Coiled Tubing by Takanori KATO*, Miyuki YAMAMOTO*, Isao SAWAGUCHI** and Tetsuo YONEZAWA*** Coiled tubings,

Surface Morphology for Poly-L-lactide Fibers Subjected to Hydrolysis Suong-Hyu Hyon Institute for Frontier Medical Sciences, Kyoto University 53, Shog

Surface Morphology for Poly-L-lactide Fibers Subjected to Hydrolysis Suong-Hyu Hyon Institute for Frontier Medical Sciences, Kyoto University 53, Shogoin Kawaharacho, Sakyo-ku, Kyoto, 606-8507 Japan Abstract:

解 説 1.は じ め 特 集 接 着 と接 合 に 2.接 エ レ ク トロ ニ ク ス 機 器 を 始 め とす る 工 業 製 品 の 大 半 は, 必 要 な 特 性 を有 す る 材 料 か らな る 多 くの 部 品(要 素)が 何 らか の 方 法 で 接 合 さ れ て 成 り立 っ

解 説 1.は じ め 特 集 接 着 と接 合 に 2.接 エ レ ク トロ ニ ク ス 機 器 を 始 め とす る 工 業 製 品 の 大 半 は, 必 要 な 特 性 を有 す る 材 料 か らな る 多 くの 部 品(要 素)が 何 らか の 方 法 で 接 合 さ れ て 成 り立 っ て い る し た が っ て,製 品 の 良 否 は,接 合 の 良 否 に 大 き く依 存 合の基礎

High-reliability metal powder products for high technology applications To create innovative materials that will help build the industrial foundation

Metal Powders and Powder Metallurgy Products SANYO SPECIAL STEEL - the Confident Choice SANYO SPECIAL STEEL High-reliability metal powder products for high technology applications To create innovative

研究成果報告書

Fe 4 N (1) 3d MBE (2) AMR (3) BiFeO 3 150 C/cm 2 Fe 4 N > 400 Fe 0 0.7 M MTJ T TMR (4) MTJ Fe 4 4N Fe 4 N BiFeO 3 Fe 4 4N Fe N N Fe 4 N Mn 4 N Fe 4 N MTJ J Co x Fe 4-x N, Ni x Fe 4-x N x = 0 T TMR ~ 4,

37 Studies on the Color Planning of Clothing The warm-cool evaluation of the skin and lipstick color and their matching Masashi KOBAYASHI Osaka Shoin

37 Studies on the Color Planning of Clothing The warm-cool evaluation of the skin and lipstick color and their matching Masashi KOBAYASHI Osaka Shoin Women's University, Osaka, Japan Abstract In this study,

) ,

Vol. 2, 1 17, 2013 1986 A study about the development of the basic policy in the field of reform of China s sports system 1986 HaoWen Wu Abstract: This study focuses on the development of the basic policy

untitled

(a) (b) (c) (d) (e) (f) (g) (f) (a), (b) 1 He Gleiter 1) 5-25 nm 1/2 Hall-Petch 10 nm Hall-Petch 2) 3) 4) 2 mm 5000% 5) 1(e) 20 µm Pd, Zr 1(f) Fe 6) 10 nm 2 8) Al-- 1,500 MPa 9) 2 Fe 73.5 Si 13.5 B 9 Nb

J. Soc. Cosmet. Chem. Jpn. 7-chome, Edogawa-ku, Tokyo 132, Japan 2.1 J. Soc. Cosmet. Chem. Japan. Vol. 31, No

J. Soc. Cosmet. Chem. Jpn. 7-chome, Edogawa-ku, Tokyo 132, Japan 2.1 J. Soc. Cosmet. Chem. Japan. Vol. 31, No. 2 1997 167 Fig.-1 Balanced fiber method Fig.-2 The effects of perming and IG on breaking off

Kaki GUNJI Introduction to Solidification of Metals ( II ) neighbours. sub-structure; stability of surface; M-S theory. N208

Kaki GUNJI Introduction to Solidification of Metals ( II ) neighbours. sub-structure; stability of surface; M-S theory. N208 (a) (b) (a) (b) (a) (b) ( 3-1 ) ( 3-2 ) ( 3-3 ) ( 3-4 ) (3-5) (3-6) (3-7) (

Size Effect of Biomass on Carbonization Rate Treated in Superheated Steam Combined with Far Infrared Heating Akiko ISA Yoshio HAGURA and Kanichi Kit Graduate School of Biosphere Science, Hiroshima University,

untitled

2010 58 1 39 59 c 2010 20 2009 11 30 2010 6 24 6 25 1 1953 12 2008 III 1. 5, 1961, 1970, 1975, 1982, 1992 12 2008 2008 226 0015 32 40 58 1 2010 III 2., 2009 3 #3.xx #3.1 #3.2 1 1953 2 1958 12 2008 1 2

9 171179 2006 Sn Ag Cu Effect of Addition Elements on Creep Properties of the Sn Ag Cu Lead Free Solder Megumi NAGANO*, Noboru HIDAKA*, Hirohiko WATANABE*, Masayoshi SHIMODA* and Masahiro ONO* * 191-8502

Safety Performance of Steel Deck Plate (Flat Decks) Used for Concrete Slab Moulding CONTENTS 1. Introduction ---------------------------------------------------------------- (2) 2. Flat Decks ------------------------------------------------------------------

CuおよびCu‐Sn系化合物のSn‐Pbはんだ濡れ性解析

61 Wettability of Cu and Cu-Sn Intermetallic Compound by Sn-Pb Solder Alloy Hisaaki Takao, Nobuyuki Yamamoto, Hideo Hasegawa CuCu-Sn Cu 150 C 2h55nmCu 2 O Cu Cu-Sn 5nm Cu-Sn Cu SnCu-Sn Wettability of Cu

d > 2 α B(y) y (5.1) s 2 = c z = x d 1+α dx ln u 1 ] 2u ψ(u) c z y 1 d 2 + α c z y t y y t- s 2 2 s 2 > d > 2 T c y T c y = T t c = T c /T 1 (3.

5 S 2 tot = S 2 T (y, t) + S 2 (y) = const. Z 2 (4.22) σ 2 /4 y = y z y t = T/T 1 2 (3.9) (3.15) s 2 = A(y, t) B(y) (5.1) A(y, t) = x d 1+α dx ln u 1 ] 2u ψ(u), u = x(y + x 2 )/t s 2 T A 3T d S 2 tot S

JFE(和文)No.4-12_下版Gのコピー

JFE No. 4 245 p. 6358 Electrical Steels for Advanced Automobiles Core Materials for Motors, Generators, and High-frequency Reactors SENDA Kunihiro JFE NAMIKAWA JFEMisao HAYAKAWA JFEYasuyuki JNE JNEH JGE

(43) Vol.33, No.6(1977) T-239 MUTUAL DIFFUSION AND CHANGE OF THE FINE STRUCTURE OF WET SPUN ANTI-PILLING ACRYLIC FIBER DURING COAGULATION, DRAWING AND

(43) Vol.33, No.6(1977) T-239 MUTUAL DIFFUSION AND CHANGE OF THE FINE STRUCTURE OF WET SPUN ANTI-PILLING ACRYLIC FIBER DURING COAGULATION, DRAWING AND DRYING PROCESSES* By Hiroshi Aotani, Katsumi Yamazaki

1 [1, 2, 3, 4, 5, 8, 9, 10, 12, 15] The Boston Public Schools system, BPS (Deferred Acceptance system, DA) (Top Trading Cycles system, TTC) cf. [13] [

Vol.2, No.x, April 2015, pp.xx-xx ISSN xxxx-xxxx 2015 4 30 2015 5 25 253-8550 1100 Tel 0467-53-2111( ) Fax 0467-54-3734 http://www.bunkyo.ac.jp/faculty/business/ 1 [1, 2, 3, 4, 5, 8, 9, 10, 12, 15] The

01_辻

20 EBSD 2008.11.28 scanning electron microscope: SEM EBSD electron back scattering diffraction [1-4] 10 EBSD anisotropy polycrystal orientation texture EBSD EBSD EBSD EBSD Table 1 EBSD Table 1-10 mmφ

ステンレス鋼用高性能冷間鍛造油の開発

Development of High Performance Cold Forging Oil for Stainless Steel Toshihide Ohmori, Kazuhiko Kitamura ClP ( ) Cl P-Zn ( P ) ClP-Zn High performance cold forging oil for stainless steel has been developed

04-“²†XŒØ‘�“_-6.01

Bull. Natn. Sci. Mus., Tokyo, Ser. E, 28, pp. 31 47, December 22, 2005 169 0073 3 23 1 153 8904 4 6 1 270 2261 2 16 4 124 0014 2 10 15 523 0058 961 The Mechanism of Automatic Display for the Temporal Hour

ゼリーこんにゃくの分析

39 Analysis of Jelly Konjac Hiromichi HAYANO, Tsutomu KUMAZAWA Central Customs Laboratory, Ministry of Finance 531, Iwase, Matsudo shi, Chiba Ken, 271 Japan Some properties of so called jelly Konjac have

Bull. of Nippon Sport Sci. Univ. 47 (1) Devising musical expression in teaching methods for elementary music An attempt at shared teaching

Bull. of Nippon Sport Sci. Univ. 47 (1) 45 70 2017 Devising musical expression in teaching methods for elementary music An attempt at shared teaching materials for singing and arrangements for piano accompaniment

01-表紙.ai

B 0 5 0-5 双極子核 I=1/ 2 四極子核 I 1 e Li Be B C N F Ne Na Mg 黒字はNMR 観測不可 Al Si P S Cl Ar K Ca Sc Ti V Cr MnFe Co Ni Cu ZnGaGe As Se Br Kr RbSr Y Zr NbMoTc RuRhPdAgCd In Sn SbTe I Xe Cs Ba La f Ta W Res Ir Pt

158 高 校 講 座 習 モ 現 ラ 習 モ 距 離 置 示 終 向 据 示 唆 与 取 ょ 第 7576 回 第 :

157 高 校 講 座 習 モ 現 第 7576 回 ラ 習 モ 全 回 杉 卓 第 : 第 : 題 高 低 違 善 善 悪 立 観 項 立 怒 始 身 近 エ ソ 訓 進 ぜ 起 客 観 姿 勢 深 ポ 身 近 来 析 視 点 批 判 リ カ リ 力 エ ソ 例 踏 ビ ラ ネ 表 隅 々 込 改 般 利 発 達 結 果 過 去 戻 標 ぼ 質 せ 反 埋 ゆ 過 知 利 益 被 ょ 少 立 止

０４０１４８９‐工芸‐医用画像２２‐１／１２［論文］柳田

364-8501 6-100 321-3292 20-2 XR 277-0804 2-1 2004 10 3 2004 12 6 Effectiveness of Mobile Flat Panel Detector system Satoshi YANAGITA, Masako HITACHI, Tomoyuki SAKURAI, Yoshihiro SUZAKI, Takashi OGURA Eiji

Laser Ablation Dynamics of Amorphous Film of a Cu-Phthalocyanine Derivative Masahiro HOSODA*,**, Hiroshi FURUTANI*,**. Hiroshi FUKUMURA*,** Hiroshi MASUHARA*, Masanobu NISHII*** Nobuyuki ICHINOSE**,***,

Vol.9, 30-40, May ) ) ) ) 9), 10) 11) NHK Table Table 1 分 類 回 答 ( 抜 粋 ) 1マスメデ

Vol.9, 30-40, May 2012 COGNITION ANALYSIS OF THE NUCLEAR ENERGY INDUSTRY PUBLIC RELATIONS STAFF WITH REGARDS TO THEIR ACTIVITIES TOWARD THE MASS MEDIA DURING ORDINARY TIMES 1 2 1 (E-mail:tsuchida.tatsuro@jaea.go.jp)

Taro-産教連原稿2009-1.jtd

エ ネ ル ギ ー 変 換 を ど う 教 え る か -エ ネ ル ギ ー 変 換 - 居 川 幸 三 は じ め に 教 育 課 程 の 移 行 期 に 入 り B. エ ネ ル ギ ー 変 換 に 関 す る 技 術 の 内 容 を ど の よ う に す れ ば い い か 毎 回 の 事 な が ら 先 生 方 の 悩 む と こ ろ で あ る し か し 指 示 さ れ て い る と

MmUm+FopX m Mm+Mop F-Mm(Fop-Mopum)M m+mop MSuS+FX S M S+MOb Fs-Ms(Mobus-Fex)M s+mob Fig. 1 Particle model of single degree of freedom master/ slave sy

Analysis and Improvement of Digital Control Stability for Master-Slave Manipulator System Koichi YOSHIDA* and Tetsuro YABUTA* Some bilateral controls of master-slave system have been designed, which can

Key Words: project management (PM), PM for civil engineering field, modern PM 首 尾 一 貫 し た 統 合 マ ネ ジ メ ン ト基 本 計 画 を 作 成 す る こ こ で は, プロジェク トへ の 要 求 事 項 を 充 足 し つ つ, プロジ ェ ク ト全 体 最 適 化 の 指 向 が 不

Taro-学校だより学力調査号.jtd

第 5 号 ( H2 7. 1 1. 1 7 ) 舞 鶴 小 学 校 ま い づ る 発 行 人 大 澤 正 史 本 校 の 学 習 状 況 に つ い て ( 今 年 度 6 年 生 が 実 施 し た 全 国 学 力 学 習 状 況 調 査 の 結 果 ) 今 年 度 の 全 国 学 A1 2007 年 よ り 日 本 全 国 の 小 中 学 校 の 最 高 学 年 ( 小 学 6 年 力 学

Vol. 21, No. 2 (2014) W 3 mm SUS304 Ni 650 HV 810 HV Ni Ni Table1 Ni Ni μm SUS mm w 50 mm l 3 mm t 2.2 Fig. 1 XY Fig. 3 Sch

110 : 565-0871 2-1 567-0871 11-1 660-0811 1-9 - 1 tanigawa@jwri.osaka - u.ac.jp Influence of Laser Beam Profile on Cladding Layer TANIGAWA Daichi, ABE Nobuyuki, TSUKAMOTO Masahiro, HAYASHI Yoshihiko, YAMAZAKI

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alterna

JOURNAL OF THE JAPANESE ASSOCIATION FOR PETROLEUM TECHNOLOGY VOL. 66, NO. 6 (Nov., 2001) (Received August 10, 2001; accepted November 9, 2001) Alternative approach using the Monte Carlo simulation to evaluate

電子部品はんだ接合部の熱疲労寿命解析

43 Evaluation for Thermal Fatigue Life of Solder Joints in Electronic Components Haruhiko Yamada, Kazuyoshi Ogawa 2 63Sn- 37Pb 95Pb-5Sn Si Cu Si 63Sn-37Pb Since automotive electronic components are used

16_.....E...._.I.v2006

55 1 18 Bull. Nara Univ. Educ., Vol. 55, No.1 (Cult. & Soc.), 2006 165 2002 * 18 Collaboration Between a School Athletic Club and a Community Sports Club A Case Study of SOLESTRELLA NARA 2002 Rie TAKAMURA

20 12,, 59 q r 2 2.1 Fig.2 [3] Fig.3 1cm Fig.2 Schematic of experimental apparatus for measuring interfacial thermal resistance. Fig.3 Surface morphol

58 *1, *1, * 2 Mechanism of Heat Transfer through Mold Flux in Continuous Casting Mold By Hiroyuki Shibata, Shin-ya Kitamura and Hiromichi Ohta 1 K.C.Mills and A.B.Fox [1] [2] Fig.1 q c q r q t q t = q

Photo. 1. Scale banding in roughing mill work roll. Photo. 2. Etched micro-structure of alloyed grain iron roll. Photo. 3. Etched micro-structure of a

Work Rolls in Hot Strip Mills Hidemaro KAWAHARA Synopsis: The work roll materials in hot strip mills and the damages of rolls which arise in rolling operation are discussed in this paper. As for the rolls

Table 1 Properties of Shrink Films on Market Fig. 2 Comparison of Shrinkage curves of PS and PET films. Fig. 3 Schematic diagram of "Variations in bot

Bowing Reduction in Biaxial Stretching Process of Styrenic Shrink Film and Its Properties YAMADA Hirofumi TAKEI Toshio and MORITA Tsuyoshi Trimming weight of PET bottle is tried from the trends of aseptic

Fig. 1 Trends of TB incidence rates for all forms and smear-positive pulmonary TB in Kawasaki City and Japan. Incidence=newly notified cases of all fo

Kekkaku Vol. 79, No. 1: 17-24, 2004 17 (Received 21 Aug. 2003/Accepted 18 Nov. 2003) Fig. 1 Trends of TB incidence rates for all forms and smear-positive pulmonary TB in Kawasaki City and Japan. Incidence=newly

On the Variation of Oxygen and Alminium in Molten Steel during Pouring Practice T. Obinata et, alii. Spoon position: (A): within 100mm under nozzle (B

On the Variation of Oxygen and Alminium in Molten Steel during Pouring Practice T. Obinata et, alii. Spoon position: (A): within 100mm under nozzle (B): 1000mm Fig. 1. Influence of the sampling methods

(3) (5) (6) 162 青 山 充 て ん層 厚 さ と流 量 計 水 柱 高 さの 関係 を 示 した 付 属 チ ャ ー トに よ り直 ち に平 均 粒子 径 を知 る よ う にな って い る. しか し,試 料 重 量 を 変 え て実 験 す る場 合,チ ρp/w=1を ャー

161 Tadaaki Aoyama: Measurement of Mean Particle Size of Tungsten and Tungsten Carbide Powders by Fisher Sub-Sieve Sizer not Dependent on Porosity. An equation for the specific surface area of powder,

Fig. 1 Schematic construction of a PWS vehicle Fig. 2 Main power circuit of an inverter system for two motors drive

An Application of Multiple Induction Motor Control with a Single Inverter to an Unmanned Vehicle Propulsion Akira KUMAMOTO* and Yoshihisa HIRANE* This paper is concerned with a new scheme of independent

ABSTRACT The Social Function of Boys' Secondary Schools in Modern Japan: From the Perspectives of Repeating and Withdrawal TERASAKI, Satomi (Graduate School, Ochanomizu University) 1-4-29-13-212, Miyamaedaira,

Vol. 48 No. 3 Mar PM PM PMBOK PM PM PM PM PM A Proposal and Its Demonstration of Developing System for Project Managers through University-Indus

Vol. 48 No. 3 Mar. 2007 PM PM PMBOK PM PM PM PM PM A Proposal and Its Demonstration of Developing System for Project Managers through University-Industry Collaboration Yoshiaki Matsuzawa and Hajime Ohiwa