PRODUCT NEWS 刃先交換式ボールエンドミル No. 9 新製品 スウィングボール ネオ SWBX/MSWX形 NEW PRODUCT 曲面加工 肩削り コーナR 溝削り コーナR シャンクタイプ モジュラータイプ φ φ0
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Features.Unique key on the body and insert fixes the inserts strongly and enables stable roughing process & machining welding parts for die in D machining..applicable to not only roughing process but also semi-finishing process due to high repeatability on mounting insert..adopted new PVD coated grades JC0 for steel and JC & JC0 for cast iron, mold steel, welding & hardened die steel. Key on the body Key way on the insert bottom Insert grade Radius form accuracy for rotation for steel JC0 for cast iron, mold steel and welding & hardend die steel. JC, JC0 Insert with breaker for low cutting force (-HM/-HS type) adopted insert grades: new PVD coated grade JC0 for steel improved both fracture toughness and wear resistance. JC can be widely plied such as general & mold steel and cast iron. Strong edge type Insert (-MMW/-MSW type) adopted JC & JC0 is possible to machine welding & hardened die steel (0-0HRC). 0 0.0mm R.7 0.0mm Insert No. Actual
Cutting performance Cutting force comparison Low cutting depth Material.79,D (raw) Tool dia., Down cut, Dry High cutting depth Material.79,D (raw) Tool dia., Down cut, Dry Main blade (Resultant force) Sub blade (Resultant force) Total (Resultant force) Main blade (Resultant force) Sub blade (Resultant force) Total (Resultant force) Competitor A Competitor A SWBX insert: 00 SWBX insert: 00 In case of low cutting depth, SWBX type insert reduced % cutting force compared with competitor A. In case of high cutting depth reduced 0% cutting force. Tool life comparison.79,d (raw) Material.79,D (raw) Tool dia. Overhung Insert Down & up cutdry Cutting length New grade (JC0) Conventional grade Competitor A Max. flank wear SWBX type insert improved tool life by. times compared with competitor A, and. times compared with conventional grade. Stainless steel MaterialStainless steel Tool dia.overhung Insert Down & up cutwet Max. flank wear Cutting length New grade (JC) Competitor A SWBX type insert improved tool life by times compared with competitor A..79 (welding, 0HRC) Material.79,D (welding, 0HRC) Tool dia. Insert Down & up cut Dry Max. flank wear Cutting length New grade (JC0) Competitor A SWBX type insert improved tool life by. times compared with competitor A.
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Body (End mill type/straight shank type) Cutting conditions Cat. No. Stock No. of inserts Dimensions Main blade Sub blade Peripheral blade SWBX-00-S 0 0 0 SWBX-000-S0 0 0 9 0 0 0.7 0 SWBX-00-S0 0 0 9 0 0 00.7 0 SWBX-00-S. 0 0 0. SWBX-0-S. 0 0 00. SWBX-00-S 0 0 0 00. SWBX-0-S 0 0 0 9 Note). All cutters are supplied without inserts.. All cutters are supplied without wrench & MOLY.. Please see page 7 for the details of machined form. Standard stock itemssoon to be stockedsoon to be deleted
Cat. No. Inserts Main blade Sub blade Peripheral blade Parts Clamp screw Wrenchnot be included For main & sub For peripheral For main & sub For peripheral SWBX-00-S SWBX-000-S0 SWBX-00-S0 SWBX-00-S SWBX-0-S SWBX-00-S SWBX-0-S SWBXHM SWBXMMW SWBX0HM SWBX0MMW SWBX0HM SWBX0MMW SWBXHM SWBXMMW SWBXHM SWBXMMW SWBX0HM SWBX0MMW SWBX0HM SWBX0MMW SWBXHS SWBXMSW SWBX0HS SWBX0MSW SWBX0HS SWBX0MSW SWBXHS SWBXMSW SWBXHS SWBXMSW SWBX0HS SWBX0MSW SWBX0HS SWBX0MSW ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL ZPMT000ZER-PL DSW-H DSW-07H DSW-07H TSW-0H TSW-0H DSW-H DSW-H TSW-H TSW-H TSW-H TSW-H DSW-H DSW-H A-0SD A-0 A-0 A- A- A-0 A-0 A-0 A-0 A-0 A-0 A-0SD A-0SD Clamp screw DSW-H DSW-07H TSW-0H DSW-H TSW-H Recommended torque..... Standard stock itemssoon to be stockedsoon to be deleted
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ MSWX TYPE Modular head MSWX type Through coolant hole Arbor Cutting conditions Cat. No. Stock No. of inserts Main blade Sub blade Dimensions Inserts Main blade Sub blade Clamp screw Parts Wrenchnot be included MSWX--M MSWX-0-M0 MSWX--M MSWX-0-M Note). All cutters are supplied without inserts.. All cutters are supplied without wrench & MOLY.. Please see page for recommended tightening torque.. Please see page 7 for the details of machined form. SWBXHM SWBXHS SWBXMMW SWBXMSW SWBX0HM SWBX0HS SWBX0MMW SWBX0MSW SWBXHM SWBXHS SWBXMMW SWBXMSW SWBX0HM SWBX0HS SWBX0MMW SWBX0MSW DSW-H DSW-07H TSW-0H DSW-H Clamp screw DSW-H DSW-07H TSW-0H DSW-H A-0SD A-0 A- A-0 Recommended torque.... Standard stock itemssoon to be stockedsoon to be deleted
Attention Attention to mounting head and MSN/ MGN shank holder. Cleaning Remove dirt and chips with air from the connecting thread and face of modular head and MSN/MGN shank holder. Initial Tightening Tighten by hand until the head and the shank holder faces touch. Final Tightening Tighten slowly with torque control spanner wrench or DIJET DS type spanner wrench and confirm that there is no g. Attention : Final tightening without initial tightening cause connecting thread damage. Note). Use the torque control spanner wrench or DIJET DS type spanner wrench.. Please gently ply pressure on wrench.. Please confirm that there is no g between MSN/MGN shank holder and modular head. Tightening procedure Thread M M0 M M Tightening Torque Nm Nm 0Nm Nm Spanner size 0,, 7, 9, Note). Modular heads are supplied without spanner wrench.. In case of choosing torque control spanner wrench, confirm that the wrench size is match to the dimensions W & C of each modular head. (There are some cases that modifying the thickness of spanner wrench is necessary). mark shows: DIJET have a stock of DS- and type spanner wrenches. Selection of "MSN Carbide shank holder" In case of using modular head over mm, please select MSN carbide shank that diameter (D) is mm or more smaller than modular head (Dc). A wrong selection causes damage to the carbide shank. MSN carbide shank neck diameter Clearance necessary more than 0.mm Coolant or air blow is recommended to flushing the chips. Modular head tool diameter Caution for the mounting to shrink fit holder. When you use a carbide shank and a modular head on the shrink fit holder, please shrink fit the only carbide shank without mounting a modular head together. Please mount a modular head after shrinking fit operation. Note) In case of shrink fit MSN shank + modular head together, it will be difficult to loose due to heat desipation.
MSN TYPE Indexable Ball Nose End Mill スウィングボールネオ Through coolant hole SWBX/MSWX For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Fig. Coolant hole dia. Fig. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight Fig. MSN-M-0-SC 0 7. MSN-M-0-SC 0 9. 0. MSN-M-0T-S0C 0 0 00. 0 MSN-M-77T-S0C 0 77. M 0.9 MSN-M-0-SC 0. MSN-M-0-SC 0 7. 0. MSN-M--SC 07. 0. MSN-M0-0-S0C 0 0 0 9. 0.9 MSN-M0-0-S0C 0 0 00 9. 9 MSN-M0-0T-S0C 0 0 00. 0 9 MSN-M0--S0C 0 0 9. 0.0 MSN-M0-T-SC. 0. MSN-M0--S0C 0 0 9. M0 0.0 MSN-M0-T-S0C 0 0. 09 MSN-M0-0-S0C 0 0 00 9. 0 MSN-M0-0T-S0C 0 0 00. 0 7 MSN-M0-0-S0C 0 0 0 9. 7 MSN-M0-0-S0C 0 0 9..07 Note) Please see page for recommended tightening torque. 7 Standard stock itemssoon to be stockedsoon to be deleted
MSN TYPE Through coolant hole For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Fig. Coolant hole dia. Fig. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight Fig. MSN-M--SC MSN-M--SC 0 MSN-M-00T-SC 00 0.. MSN-M-0-SC 0 M.0 MSN-M--SC.0 MSN-M--SC 0. MSN-M-00-SC 00. MSN-M--SC 9 MSN-M--SC 0 9. MSN-M-77-SC 77 7 9.7 MSN-M-97-SC 97 77 9. MSN-M-0-SC 0 9.9 MSN-M-7T-SC 7 97 9 0. MSN-M-7-SC 7 07 9.9 MSN-M-7T-SC MSN-M--SC 7 07 0 9 9 00 M..0 MSN-M-77-SC 77 7 9. MSN-M-77T-SC 77 7 9 0.7 MSN-M-9-SC 9 0 9.0 MSN-M-97T-SC 97 77 9 0.00 MSN-M--SC 9.7 MSN-M--SC 0 9.7 MSN-M-9-SC 9 0 9.7 Note) Please see page for recommended tightening torque. Standard stock itemssoon to be stockedsoon to be deleted
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ MSN TYPE Through coolant hole For high productivity MSN Carbide shank holder JCTMA ECO PRODUCT Coolant hole dia. Straight arbor type Cat. No. Stock Dimensions kg Weight MSN-M-97S-SC 97 0. MSN-M-7S-SC 7 M MSN-M-97S-SC 97 0. MSN-M-07S-SC MSN-M-7S-SC 07 7 M 0.0 MSN-M0-0S-SC 0 0. MSN-M0-S-SC M0 0. MSN-M0-0S-SC 0 9 MSN-M0-0S-S0C 0 MSN-M0-S-S0C 0 M0 MSN-M0-0S-S0C 0.0 MSN-M-S-SC MSN-M-S-SC M 0.9. MSN-M-S-SC MSN-M-S-SC M.07. MSN-M-S-SC 0.9 MSN-M-S-SC M. MSN-M-S-SC.0 MSN-M-0S-SC 0. MSN-M-0S-SC 0 M.77 MSN-M-0S-SC 0. MSN-M-7S-SC 7. MSN-M-7S-SC MSN-M-7S-SC 7 7 M..9 MSN-M-7S-SC 7. Note) Please see page for recommended tightening torque. 9 Standard stock itemssoon to be stockedsoon to be deleted
MGN TYPE Through coolant hole MGN G-Body steel shank holder Adopted ultra-rigid and improved body durability "G-Body". Short type Cost-effective and high strength steel shank holder. Coolant hole dia. End mill shank type Cat. No. Stock Dimensions kg Weight MGN-M-7-S MGN-M0-0-S0 MGN-M--S MGN-M--S MGN-M-7-S MGN-M-77-S 0 7 0 7 77 97 00 0 07 7. 9 9 9 M M0 M M M M 0. 0. Note). In case of using modular head combined with MGN steel shank holder, ply the recommended cutting conditions sheet (see page 7 ).. Please see page for recommended tightening torque. Adopted GN surface-hardening treatment on thermal resistant high strength steel gives high hardness over HRC and secure insert pocket and holder against thermal deformation, improved body durability and tool life by 0% or more, compared with competitor's tool. Make it difficult to be damaged even under severe cutting conditions. Also rust-proof and anti-welding effect is much improved. Adopted GN surfaceplease scan the below QR code for the other arbor (MSA type intergrated carbide shank) Standard stock itemssoon to be stockedsoon to be deleted 0
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Inserts Fig. (Main blade for low cutting force) Fig. (Sub blade for low cutting force) Fig. (Main blade for welding & hardened material) Fig. (Sub blade for welding & hardened material) Fig. (Peripheral blade) Cat. No. Type PVD coated Dimensions JC0 JC JC0 Fig. SWBXHM SWBXMMW Main (for low cutting force) Main (for welding & hardened material) 7.9 7.9.. SWBXHS Sub (for low cutting force)... SWBXMSW SWBX0HM SWBX0MMW Sub (for welding & hardened material) Main (for low cutting force) Main (for welding & hardened material) 0 0.... 9.9 9.9..9.9 SWBX0HS Sub (for low cutting force) 0.9..9 SWBX0MSW Sub (for welding & hardened material) 0.9..9 SWBXHM Main (for low cutting force).... SWBXMMW SWBXHS SWBXMSW Main (for welding & hardened material) Sub (for low cutting force) Sub (for welding & hardened material)....... 0. 0.... SWBX0HM SWBX0MMW SWBX0HS SWBX0MSW Main (for low cutting force) Main (for welding & hardened material) Sub (for low cutting force) Sub (for welding & hardened material) 7.9 7.9...7.7.. ZPMT000ZER-PL Peripheral 0. 0 inserts per case. Note). Please see page for cutting conditions and page for the details of machined form.. Be sure to use the same type & the same grade for main & sub blade together. Standard stock itemssoon to be stockedsoon to be deleted
Work Vertical MC (HSK)WorkVertical MCWorkVertical MC Cutting data Machining turbine blade Result Overhung length: Compared with competitor's, MSWX reduced machining time by half and improved tool life by times (machined 00 works). No chatter and good surface roughness. WorkVertical MCTool Cutting conditions Part name Material Hardness Tool No. Insert No. n, Vc Vf, f Coolant Machine Turbine blade Stainless steel (.0) Water soluble Machining stamping die Part name Stamping die Material.79, D Hardness Tool Tool No. Insert No. Result Overhung length: After 7. hours (cutting length: km), inserts showed normal wear and were still able to continue. Cutting conditions n, Vc Vf, f Coolant Machine Mist coolant Machining forging die Part name Forging die Material.7 Hardness Tool Tool No. Insert No. Result Overhung length: Total machining time of roughing & finishing is 0 hours. No chatter and good surface roughness. Cutting conditions n, Vc Vf, f Coolant Machine Roughing: mm, finishing: mm Roughing: mm, finishing: mm Air blow Machining welding part Part name Stamping die Material.79+welding Hardness Tool Tool No. Insert No. Result Overhung length: Machined welding part for hour. Inserts were still good conditions (no breakage and normal wear). Cutting conditions n, Vc Vf, f Coolant Machine Air blow
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for Swing Ball-NEO mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),000 0,00 0,00 0,00 0,000 0,00 0,00 0,00,00 0,00 0,000 0,000,000,00,00,00 000 00,00 0,0 00,00,00,00,00,000,000,000 00,00,00 0,00 0 000 00,00 0,00 00,00,00 0,000 00,00 0,00 0,0 0,00 0,00 0,00 0,00 0,00 0,00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.
Recommended cutting conditions for Swing Ball-NEO 0mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),0,00 0,0 0,00 0,0 00, 0,00 0,0,0,00 0,00 0,0,0,000,00,0 0,00 0,0 0, 00,00 0,0,00,00,00 0,0,000,0 00 0,00 0,0 0 0,00 00 0,0 0 0, 0,0,00 0,00 0,00 00 0,0 00 0,0,0 0, 0,0 0,00 0,0,0 0,0 0,0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for Swing Ball-NEO mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 MMW/MSW MMW/MSW MMW/MSW JC0 JC JC JC JC JC JC JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ) n (min - ),0,00,0,00 0,00 0,00 0,00 0,0,000,00,00 0,0,0,00 0,0,00 0,00 0,00 00,00 0,0,0,00 0,00 0,0,0..,00 0..,0 0..,00 0..,00 0..,00 0,0 0..,00 0..,00 0..,0.., 00 0,0 0 0, 0 0,0 0 0,0 0 0, 0 0,0 0 0,0 0 0, 00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.
Recommended cutting conditions for Swing Ball-NEO 0mm dia. Type of machining Slotting Shoulder cutting Shoulder cutting Materials Insert type Grade Parameter ae ae (S0C,SC ) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) (.,P0) 0-HRC NAK0,P) (.,P) -HRC (SKD,DAC,DHA) (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 JC0 JC JC JC n (min - ) n (min - ) JC0 JC n (min - ) JC0 JC n (min - ) JC n (min - ) JC n (min - ) MMW/MSW JC0 JC n (min - ) MMW/MSW JC0 n (min - ) JC MMW/MSWJC0 n (min - ) JC0 JC n (min - ) n (min - ),00 00 0,0 0, 0 0,00 0 0,00 0,00 00,00 0,00,0 0,0 0,00 0 0,00 00 0,00,00 0,0 0, 0 0,00 00 0,00 0 0,00 0,00 0,00,0 0,0 0,00 00 0,00,00 0,00 7 9,0 0 9, 00 9,00 00 9,00 0 9,00 00.,00,00 9,0 0 9,00 00 9,00 7 9,00 0, 0,0,0 0,00,0 0, 0,0 0,00 0 NOTE The figure to be adjusted according to the machine rigidity or work rigidity. In case of chatter occurring, recommend to reduce the depth of cut or Spindle speed and keep feed per tooth.
SWBX/MSWX Indexable Ball Nose End Mill スウィングボールネオ Recommended cutting conditions for MSWX and MSN Materials (S0C,SC) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) 0-HRC (.,P0) 0-HRC NAK0,P) -HRC (.,P) -HRC (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 Insert type Grade 0 JC0 00 JC 0 0 JC 00 JC0 0 0 JC0 00 JC JC JC 0 0 00 0 0 00 0 0 HW/HS JC 00 MMW/MSW 0 0 MMW/MSW JC 00 0 0 JC 00 MMW/MSW 0 0 JC 00 JC0 0 0 JC JC 00 0 0 00 0..... 0. 0. 0. 0...0 0.... (min - ) (mm/min).0,00,0,00,0,00,0.0,000,00,000,00,00,0.0,000,00,000,00,00,00.0,00,00,00,00,000,00.0,00,00,00,00,000,00,000,00 0.,00,00 0.,00 0.,00,00,00 0 0.,000 00.,000,00.0,000,00 0.,00,00.0,000,00,000,00,00,0.0,00,00,00,00,000,00.0,00,0,00,0,00,0 0 0 0 0 0 0 0 0 0 0 0 Tool dia...... 0. 0. 0. 0...0 0.... (min - ) (mm/min).,00,0,00,0 0.,000,00.,000,00,000,00 0.,00,00.,000,00,000,00 0.,00,00.,00,0,00,0 0.,00,00.,00,0,00,0 0.,00,00 0.9,00,00,00,00,0 0.,0 0.,00 00 0.,00 0.,00,00.0,00,00 0.,0,0.,000,00,000,00 0.,00,00.,00,0,00,0 0.,00,00.,00,0,00,0 0.,000,00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0......0 0. 0...0 0.... (min - ) (mm/min).,00,0,00,0 0.,00,00.,00,0,00,0 0.,00,.,00,0,00,0 0.,00,.,00,00,00,00 0.,000,00.,00,00,00,00 0.,000,00.0,0,0,00 0 0.,00 00,00 0.,00 0,00 0.,00,00.0,00,00 0.,0,00.,00,0,00,0 0.,00,.,00,00,00,00 0.,000,00.,00,0,00,0 0.,00,00 NOTEThe figure to be adjusted according to the machine rigidity or work rigidity. Use air blow. 7 SWBX type 0....7 0. Note) At center point as shown in above figure, material can be left as mentioned in chart. Machined form by Swing Ball-NEO 0.0 0.0 0.0 0.0
Materials Insert type Grade (min - ) Tool dia. (mm/min) (S0C,SC) Carbon steel (C0,C) Below 0HB (GM,IDC) Cast steel (.7) Below HB (SKD,SKD) Die steel, (.,.79) Below HB (HPM7,PX,P0) 0-HRC (.,P0) 0-HRC NAK0,P) -HRC (.,P) -HRC (.,.79) -HRC (SKD) (.79) -HRC (FC0) Grey iron (GG) 0-0HB (FCD0) Nodular cast iron (GGG) -00HB SUS077Cr StainlesssteelAustenitic AISI07 SUS00J0Cr StainlesssteelFerritics/Martensitic AISI00J0 JC0 JC JC JC0 JC0 JC JC JC JC MMW/MSWJC0 MMW/MSW JC0 JC MMW/MSWJC0 JC JC0 JC JC 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0 00 0 0..0..0..0..0..0.0 0. 0...0 0...0..0..0..0..0..0..0..0..0 0...0..0..0..0,000,00,000,00,0,0,00,0,00,0,00,00,00,0,00,0,00,00,0,00,0,00,00,000,0,00,0,00,00,000,00,00,00 0,00 0,00 0,00 0,00,00,00,00,00,00,00,0,00,0,00,00,0,00,0,00,00,000,000,00,000,00,0,0 NOTEThe figure to be adjusted according to the machine rigidity or work rigidity. Use air blow. Maximum plunging depth and feed rate for Swing Ball-NEO Materials (FC,FCD,GM) Cast iron (GG,GGG) Cast steel, Alloy steel, Die steel Max.value f (mm/rev) f (mm/rev) f f 0. 0. Tool dia. 0 0 0 0 0.0 0.0 0. 0 0
DIJET INDUSTRIAL CO., LTD. 本 社 7-000 大阪市平野区加美東丁目番号 TEL. 0 79 7代表 FAX. 0 79 Headquarters --, Kami-Higashi, Hirano-ku, Osaka 7-000, Jan Phone: --79-7 Fax: --79- 国内 拠 点 東 京 支 店 東関東営業所 大 阪 支 店 大阪営業所 -00 埼玉県三郷市中央１丁目８番地２ Residencia 善F 7-000 大阪市平野区加美東２丁目１番１８号 TEL. 0 99 7 TEL. 0 79 0 FAX. 0 99 7 FAX. 0 79 07 富山営業所 南関東営業所 -0 神奈川県横浜市神奈川区鶴屋町２丁目２６番地４ 第３安田ビルF TEL. 0 00 99-09 富山市西大泉１７番２０号 浜忠第二ビル １-B TEL. 07 7 FAX. 0 00 FAX. 07 7 広島営業所 北関東営業所 7-0 群馬県太田市小舞木町６１４番地 7-00 広島市南区東雲１丁目２３番１５号 板村ビル１F １０３号 TEL. 07 TEL. 0 7 FAX. 07 7 FAX. 0 7 九州営業所 仙台オフィス 9-0 仙台市宮城野区榴岡５丁目２番３号 -00 福岡市博多区博多駅前４丁目３番３号 博多八百治ビルF TEL. 0 99 0 TEL. 09 0 FAX. 0 99 FAX. 09 7 名古屋 支 店 名古屋営業所 -00 名古屋市昭和区明月町１丁目３９番地２ エクセル御器所F TEL. 0 00 FAX. 0 場 大阪事業所 7-000 大阪市平野区加美東２丁目１番１８号 三河営業所 -00 愛知県安城市三河安城南町１丁目１５番地１０ シティタワーF TEL. 0 7 00 工 FAX. 0 7 77 TEL. 0 79 7 三重事業所 -00 三重県伊賀市伊勢路７５８-１４ TEL. 09 00 浜松オフィス FAX. 09 富田林工場 -00 大阪府富田林市中野町東２丁目１番２３号 0-09 静岡県浜松市中区砂山町３４０番地の７ TEL. 0 FAX. 0 79 FAX. 0 79 TEL. 07 0 FAX. 07 海外拠点 DIJET GmbH (Europe) Immermannstr.9 00 Düsseldorf, Germany Phone. 9--000, 00 Fax. 9--00 DIJET INDUSTRIAL CO., LTD. (Bangkok Representative Office) 99 Srinakarindr Road, Modernform Tower th Floor, Kweang Suanluang Khet Suanluang, Bangkok 00, Thailand Phone. --7-, 9 Fax. --7-0 DIJET INDUSTRIAL CO., LTD. (Shanghai Representative Office) Room No.00 Tomson Commercial Building., Dongfang Rd., Shanghai 00, China Phone. --0-9 Fax. --0-99 DIJET INDUSTRIAL CO., LTD. (Guandong Representative Office) Rm. JF, A Building, Lotus Plaza, Xianxidadao Road, Changan Town, Dongguan City, Guangdong Provence, 0 P. R., CHINA Phone. -79--00, 00 Fax. -79--0 技術相談フリーコール サンキュー ハ イ サンキュー 営業企画課 FAX 0-79-0 ご使用上の注意 DIJET INDUSTRIAL CO., LTD. (Chengdu Office) RM.No.0, No.BLDG.A-B Stand, Hi-Tech Incubation Garden, No.0 Tianfu Avenue North, Hi-Tech District, Chengdu City, Sichuan, P.R.CHINA Phone. --- Fax. ---7 DIJET INDUSTRIAL CO., LTD. (Wuhan Office) B-, Jiayu Jianyin Business Masion, No.0 Chuangye Road, Wuhan Eco. & Tech. Development Zone, Wuhan City, Hubei 00, China Phone. -7-77-99 Fax. -7-77-99 DIJET INDUSTRIAL CO., LTD. (Mumbai Representative Office), ARCADIA Hiranandani Estate, Patlipada, G.B. Road, Thane (W) 00 07, India Phone. 9--0- Fax. 9--0-099 DIJET Incorporated (U.S.A.) 07 Helm Street, Plymouth, MI U.S.A. Phone. -7--0 Fax. -7--99 インターネットホームページ https://www.dijet.co.jp 工具を安全にご使用いただくために 不適切な切削条件で使用しないでください 大きな摩耗や欠けのある工具は使用しないでください 切りくずの飛散 巻き付きによるケガにご注意ください 又 保護眼鏡や安全カバーをご使用ください Grinding produces hazardous dust. To avoid adverse health, use adequate ventilation and read Material Safety Data Sheet first. WARNING: Cutting tools may fragment in use. Wear eye protection in the vicinity of their operation. 工具仕様は 改良のため予告なく変更することがあります Specification shall be changed without notice. 販売店 00SS.A