8-Seiter2012-Okt.indd

PASSIVE COMPONENTS Selection Guide

Surface Mount Resistors & Arrays Flat chip resistors and arrays include general purpose, high precision, pulse and surge, high voltage, high heat, anti sulfuration and zero ohm types for applications ranging from general purpose to ultra precision. Thick Specialty Surge Current - SG73 10x pulse power capability Resistance Range: 1Ω ~ 1MΩ Tolerance: ±10%, ±20% 0603, 0805,1206, 1210, 2010, 2512 Thin Ultra Precision - RN73 Tolerance: ±0.05% ~ ±1% T.C.R. Max.: ±5, ±10, ±25, ±50 or ±100 ppm/k ckel chromium thin film resistor element Ultra Precision - RN73H High Temperature range up to +155 C Higher rated ambient temperature: +85 C Improved moisture resistance with special coating Tolerance: ±0.05% ~ ±1% T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/k Resistor Arrays Isolated Resistors Convex, Square Corners - CN_K Tolerance: ±1% ~ ±5% 0201, 0402, 0603 x2, x4, x8 elements 01005 0603 1210 0201 0805 2010 0402 1206 2512 RuO 2 Thick General Purpose - RK73B Tolerance: ±2% and ±5% Resistance Range: 1Ω ~ 22MΩ Precision - RK73H Tolerance: ±0.5% and ±1% Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G T.C.R.: ±50 ppm/k Tolerance: ±0.5% and ±1% Zero Ohm - RK73Z Maximum Resistance of 50mΩ Maximum Continuous Current @70 C: 0.5A ~ 2.0A NEW Anti-Sulfur Excellent anti-sulfuration characteristics High heat and weather resistance Series available: RK73B RT CN_RT SG73 RT RK73H RT CN_KRT RK73Z RT CNZ_RT NEW Pulse SG73P and Surge SG73S Resistance Range: 1Ω ~ 10MΩ Tolerance: ±0.5%, ±1%, ±2%, ±5% 0402, 0603, 0805, 1206, 1210 Voltage SG73S SG73P Wide Terminal - WK73R Robust Thermal Cycle characteristic Power Rating: 0.75W ~ 2W Tolerance: ±1% or ±5% T.C.R.: ±100 and ± 200 ppm/k 0612 1020 1218 2512 RuO 2 Thick High Voltage - HV73 2.5x to 10x rated working voltage of standard thick film Chip Size 2512 with 3kV rated voltage 0603, 0805, 1206, 2010, 2512 350V, 400V, 500V, 2kV, 3kV Resistance Range: 10kΩ ~ 51MΩ Tolerance: ±0.5%, ±1%, ±2%, ±5% 0603, 0805, 1206, 2010, 2512 0402, 0603, 0805, 1206, 1210 MELF Carbon /Metal /Zero Ohm RD41 Carbon Series RN41 Metal Series CC Zero Ohm Series CERAMIC Composition - CPCN Reliable in pulse transient applications Power Rating: 0.5W, 1W, 1.5W and 2W Resistance Range: 1KΩ ~ 15KΩ Custom ohmic values on request Tolerance: ±20% Concave, Square Corners - CN Tolerance: ±1% ~ ±5% 0402, 0603, 0805, 1206 x2, x4, x8 elements Convex, Scalloped Corners - CN_A Resistance Range: 1Ω ~ 1MΩ Tolerance: ±1% and ±5% 0603, 1206 x2, x4 elements Zero Ohm Jumper - CNZ Convex or Concave Current Rating @70 C (per element): 0.5A and 1.0A 0402, 0603, 0805, 1206 x2, x4, x8 elements NEW Anti-Sulfur Excellent anti-sulfuration characteristics High heat and weather resistance Series available: CN_RT CN_KRT CNZ_RT Bussed Resistors Convex or Concave - CND Reverse common electrode and side electrode type circuits available Resistance Range: 22Ω ~ 100KΩ 1206, 1608 and 2512 Convex Staggered Terminations - CNB Resistance Range: 1KΩ ~ 470KΩ 4 or 8 elements included in one array in 2 sizes BGA (ball grid array) - BR High level of integration Low inductance 18 integrated resistors Isolated or bussed

Current Sense Resistors Four basic types of current sensing resistors are available in lowohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Thick Metal Plate Power Shunt Low-ohm - SR73 Series Resistance Range: 24mΩ ~ 10Ω Tolerance: ±0.5% ~ ±5% 0201 ~ 2512 Best T.C.R.: ±100 ppm/k Ultra-low Ohm - UR73(D) Series Face-up and Face-down types available Resistance Range: 10mΩ ~ 100mΩ Tolerance: ±1% Improved T.C.R.: ±100 ~ ±300 ppm/k 0402 ~ 2512 Wide terminal - WK73S Robust Thermal Cycle characteristic Power Rating: 0.75W ~ 2W Resistance Range: 10mΩ ~ 9.1Ω Tolerance: ±1% or ±5% T.C.R.: ±100, ±200, ±300 or ±800ppm/K 0612, 1020, 1218 and 1225 Robust Lead - Frame SL(N)/TSL Series with flame retardant resin (UL94 V-0) Non-wirewound, excellent for high frequency Enhanced thermal shock capability Operating Temperature: up to +180 C Power Rating: 0.75W ~ 3W Resistance Range: 3mΩ ~ 22MΩ Tolerance: ±0.5%, ±1%, ±2%, ±5% T.C.R.: ±75 ~ ±200 ppm/k Resin Four-terminal - CSR Series Suitable for Kelvin applications Power Rating: 1W & 2W Resistance Range: 5mΩ ~ 50mΩ Tolerance: ±0.5% & ±1% T.C.R.: ±50 ppm/k Resin Voltage Current Case - BLR Series Flame retardant ceramic case Resistance Range: 8mΩ ~ 50mΩ, ±10% Power Rating: 1W, 2W or 15W Resistor TLR Series Resistance Range: 1mΩ ~ 20mΩ Tolerance: ±1%, ±2% or 5% Ultra Low T.C.R.: ±50, ±75 ppm/k 0402, 0805, 1206, 2010, 2512 chip size Ultra Low Height: 0.25 ~ 0.6mm TLR H Series Resistance Range: 10mΩ - 250mΩ Tolerance: ±1% Ultra Low TCR: ±50, ±75 ppm/k Ultra Low Height: 0.25, 0.5 mm 0805, 2010, 2512 chip size Power Rating 0.25W, 1W, 2W Top protective coating Bottom protective coating element LR72 Series Power Rating: 1/4W, 1/2W & 1W Resistance Range: 2mΩ ~ 10mΩ T.C.R.: ±100, ±350 ppm/k Custom configurations available LR72A LR72B Termination Metal plate carrier Insulation electrode Copper ckel Alloy Termination LR72A 5 size Copper ckel Alloy Termination High power - PSB Series Power Rating: 6W Resistance Range: 0.75mΩ & 1mΩ Tolerance: ±1% T.C.R.: ±75 ppm/k Special electrode shape ensures excellent temperature cycling characteristics High power - PSI Series Power Rating: 3W, 5W Resistance Range: 1mΩ ~ 4mΩ Tolerance: ±1% T.C.R.: ±50 & ±75 ppm/k Smooth current flow, suitable for large current detection High power - PSE Series Power Rating: 3W, 5W Resistance Range: 0.5mΩ ~ 2mΩ T.C.R.: ±150 ppm/k Smooth current flow, suitable for large current detection Cement LR72C Case Copper ckel Alloy Termination

Thermal Sensors and Circuit Protection In addition to our flat chip resistors we offer a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Thin Linear Positive - LT73(V)/LP73 LT73 available in 25 specifiable temperature characteristics LT73V: 0805 & 1206 for Automotive Resistance Range: 51Ω ~ 51KΩ Tolerance: ±1% ~ ±5% T.C.R.: ±150 ~ ±5000 ppm/k T.C.R. Tolerance: ±150 ppm/k ~ ±5% 0603, 0805 & 1206 Positive Temperature Characteristics Resistance Changing Rate (%) Thick Linear Positive - LA73 Available in 13 specifiable temperature characteristics T.C.R. Tolerance: ±200 ppm/k or ±10% Resistance Range: 22Ω ~ 10KΩ, ±5% 0603, 0805 & 1206 PTC Thermistor - PT72 Three Curie Temperatures: 70 C, 80 C & 100 C Resistance Range: 50Ω, 120Ω, 470Ω & 1kΩ 0603 & 0805 Resistance (kω) NTC Thermistor- NT73 Resistance Range: 1kΩ ~ 150 kω ~ ±15% B Constant Tolerance: ±3% ~ ±10% 0603, 0805, 1206 Resistance (Ω) Thermal Sensors 60 50 40 30 20 10 0-10 -20-30 -50 1000 100 10 1 0.1-20 10,000,000 1,000,000 100,000 10,000 1,000 100 10-50 -25 0 25 50 75 100 125 Ambient Temperature ( C) Temperature Characteristics 100k 10k 1k CT CT 70 C 80 C Negative Temperature Characteristics 4500ppm/ C 3300ppm/ C 2400ppm/ C 1600ppm/ C CT 100 C 0 20 40 60 80 100 120 140 160 Temperature ( C) -25 0 25 50 75 100 125 Temperature ( C) 3800k 3800k 3200k Platinum Thermal Sensors Chip Type Sensor - SDT73H / SDT73V T.C.R in accordance with DIN EN/IEC 60751 V Series = AEC-Q200 tested Resistance Range: 100Ω & 500Ω Tolerance: ±0.2% or 1% T.C.R.: ±3850ppm/K ±50ppm/K Axial Type - SDT101A/SDT101B -55 to +300 C Operating temperature Resistance Range: 10Ω, 100Ω, 500Ω Tolerance: ±0.5% or ±1% T.C.R.: ±3500 ppm/k ±1% or ±2% Radial Type - SDT310 T.C.R. in accordance with JIS/DIN Standards High resistance in small package Resistance Range: 100Ω, 500Ω, 1KΩ Tolerance of Measuring Temp: Down to ±(0.15+0.002 t ) C Temperature Range: -55 C ~ +650 C Platinum Thin Marking (A only) Platinum Thin Insulation Platinum Thin Core Trimming Line Lead Weld Reinforcing Welding Point Cap Lead Wire Lead Wire Custom Configurations - ST Series/AFS Units Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation Flow sensor (automobiles, industrial equipment, home appliances) Measuring equipment (electric scale, load cell, flow sensors, automotives) Cold junction compensation of thermocouple temperature controllers Fuses Fusing Flat Chip Resistors - RF73 Resistance Range: 0.2Ω ~ 510Ω 0603 ~ 2512 Chip Current Fuses - TF Rated Current: 0.2A ~ 5A Rated Voltage: 24V & 32V 0402 & 0603 U.D. TF16VN: 0603 for Automotive Fuse Micro-Fuse - CCP UL 248.14 approved, File #131375 Fusing Current: 1A ~ 10A Rated Voltage: 24V ~ 76V 1206 & 1210 Chip Fuse - CCF1N Square ceramic body Size: 6.0 x 2.5 x 2.5 mm Up to AC125V and DC160V UL248.14, c-ul(csa)c22.2 Rated Current: 0.4A ~ 15A NEW Chip Fuse - CCF1F Fast blow Meets IEC60127-4 specifications Universal modular fuse-links Standard sheet 2 Thermal Fuse & Power Resistor - WF Rated Current: 2A & 10A Rated Voltage: 250V Resistance Range: 1Ω ~ 10KΩ WF TPR Case Cement Thermal Fuse Resistor Lead Wire Resin Buffer Fuse Resistor Cover Base Terminal wire NEW Temperature Protection Resistor TPR Quickly fusing to overcurrent Circuit is completely interrupted after fusing Lightning surge test (IEC61000-4-5) effective UL1412 (File E344400) approval awarded Power Rating: 1Watt Resistance Range: 2Ω ~ 10kΩ Varistors Metal Oxide Chip - NV73 Protects against static electricity, switching and incoming surges Varistor Voltage: 8Vc ~ 165Vc 0201 ~ 2220 Maximum Energy: 0.005J ~ 12.0J Automotive Metal Oxide Chip - NV73DL Conforming to AEC-Q200 Low leakage current Operating Temperature: up to +125 C Varistors Voltage: 10 ~ 90 V 1mA 0603, 0805 & 1206 NEW Chip Varistor for Load Dump Surge NV73DS Meets load dump surge test of JASO High energy power - comparable to power Zener diodes Size: 6.1 x 5.1 x 3.0mm Varistor Voltage: 20~25V; 40~45V Varistor Side Metal Oxide Disc Type - NVD Higher surge current Absorbs positive and negative surges Varistor Voltage: 16V~1980V Disc diameters of 05, 07, 10, 14 & 20 Maximum Energy: 0.3J ~ 360J 1 2 3 4 Sn 1 Insulation coating 2 s 3 Varistor element 4 Lead wire

101 s Coil solutions on different cores cover an application range from RF to power by using ferrite, ceramic, thin film and choke coil technologies. Wirewound 1210 Ferrite Core - KL32/LFC32 Wide range of applications Resin Flat-top design High Q with wirewound structure Inductance Range:.005µH to 330µH ~ ±20% Choke Coils Choke Coils TRANSPONDER COILS Transponder Coil Power - LPC NEW Magnetic Shielded Power LCM1060 Rx-Receiver KT 11835 Sizes with bottom terminations: Extremely low leakage magnetic flux Single-axis LF antenna (for NEW receiving) 4045, 9040, 10065, 12065 High rated current in 10 x 10mm size High Q and High Sensitivity DC Current Max.: 0.12A ~ 10A Strong to vibration, shock and TRANSPONDER Tested acc. to Inductance Range: 0.68µH ~ 6.8mH substrate bending KT11835 トランスポンダーコイル AEC-Q200 requirements COILS DC Current Max.: 0.56A ~ 6.2A ( 受信 ) Transponder coils (Rx) Tolerance: ±10% ~ ±30% Inductance TRANSPONDER Range: 1.5µH ~ 470µH COILS 4 element terminal structure NEW DC current Max: 12mA ~ 15mA KT11835 Tolerance: ±20%, ±30% トランスポンダーコイル ( 受信 ) Transponder Inductance Range: 12mH and less KT11835 トランスポンダーコイル coils (Rx) Tolerance: ( 受信 ) Transponder coils (Rx) ±2%, ±3%, ±5% NEW EU RoHS E Ro Magnet Wire Resin Ferrite Core Magnet Wire Shielded - LKS EU NEW LPC 4235, 4545 High Q Air Core - KQ/KQT CHOKE COILS Sizes 0745, RoHS 1045, 1260 NEW 4 mm size with bottom and side EU High self resonant frequency DC Current Max.: 0.4A ~ 6.6A terminations RoHS EU OKE Ideal for low COILS loss, high output power consumption Tested LKS パワーチップ磁気シールドタイプ Power Chip s Shielded Type Inductance RoHSRange: 3.3µH ~ 470µH acc. to AEC-Q200 requirements Tolerance: ±20% or ±30% Q Factor Min.: 16 ~ 60 DC Current Max: 0.1A ~ 3.66A パワーチップ Power Inductance Range: 1.0nH ~ 10µH Inductance Chip s Range: 0.82µH ~ 2200µH C4235 4545 パワーチップ Power Chip s Tolerance: ±0.1nH ~ ±20% 構造図 Tolerance: Construction ± 10% or ±20% 電極を製品長辺へ配置した樹脂モールド外装のトランスポンダーコイル ランスポンダーコイル 0402, 0603, 0805 & 1008 構造図 Construction 電極やランドパターンがコイル磁束を妨げないた ランスポンダーコイル め Q 値 感度が高い LPC4235 め Q 値 感度が高い 電極やランドパターンがコイル磁束を妨げないた 4 端子電極と樹脂モールド外装により 耐振動 4 端子電極と樹脂モールド外装により 耐振動 め Q 値 感度が高い 耐衝撃 耐基板曲げ性能に優れる 環境温度変化に対するL 値変化が小さい 耐衝撃 耐基板曲げ性能に優れる 4 端子電極と樹脂モールド外装により 耐振動 耐衝撃 耐基板曲げ性能に優れる リフローはんだ付けに対応します 環境温度変化に対する L 値変化が小さい 欧州 RoHS 対応品です 環境温度変化に対する Ferrite L Core 値変化が小さい リフローはんだ付けに対応します 1 フェライトコア Ferite core Transponder coil that is arranged it s electrode 2 電極リフローはんだ付けに対応します 欧州 RoHS 対応品です in the long side of the part, and is covered with NEW Z-Axis LF Antenna Coil KTZ1030 High Q and high sensitivity Magnetic Shielded - SDS Strong fixation with PC board by Wire E COILS 欧州 RoHS 対応品です molding resin. 特長 Features Transponder coil Transponder that is arranged it s electrode Excellent coil that high is arranged Q and high it s sensitivity, electrode because 漏洩磁束が少ない閉磁タイプのパワーチップイン in the long side 形 of 名 part, and EU is covered 寸法 Dimensions with (mm) in the long side neither of the electrode part, and nor is the covered land pattern with disturb ダクタ Type A B C Max. D±0.3 E±0.2 molding resin. molding resin. the coil flux. 小型 薄型 LKS0745 Sizes 7.5±0.5 available: RoHS 7.5±0.5 0804 ~ 4.5 1208 1.0 2.0 LPC4545 4 metal terminal electrodes 直流抵抗値が小さく 定格電流が大きい Excellent high LKS1045 Q Excellent and 10.1±0.3 high high sensitivity, Strong 10.1±0.3 Q to and vibration, high because 4.5 sensitivity, shock and substrate 2.0because bend test by 3.0 4 electrode terminals structure and the molded resin. High Current Air Core - KQC DC Current Max.: 0.07A ~ 7.5A Low height of 3mm リフローはんだ付けに対応します neither the electrode LKS1260 nor 12.5±0.3 land 12.5±0.3 pattern disturb 6.0 1.5 5.0 neither the electrode nor the land pattern disturb Small inductance change to environmental 欧州 RoHS 対応品です the coil flux. the coil flux. Low DC resistance, high allowable Inductance temperature Range: change. 2.2µH ~ 15000µH Inductance range: 16mH and less Magnetic shielded power chip inductors with a Strong to vibration, 品名構成 Strong shock Type to and vibration, substrate Designation Suitable shock for bend reflow and test substrate soldering. by bend test by DC current Tolerance: ±10% ~ ±20% Tolerance: ±2%, little leakage magnetic flux. ±3%, ±5% パワーチョークコイル Nominal Power Inductance: Choke Coils 1.4nH ~ 27nH Tolerance: ±0.1nH ~ ±5% eatures OILS Small size and Low-profile. 4 electrode terminals 例 Examples 4 electrode structure terminals and Products the structure molded meets EU-RoHS resin. and the requirements. molded resin. Low DC Resistance and larger Rated Current. Small inductance LKS Small change 0745inductance to Tenvironmental change TEG to environmental 100 M EU 用途 Applications Suitable for reflow soldering. temperature change. temperature change. 品種形状 端子表面材質下記用途の受信用二次加工 LFアンテナコイル Ferrite core 公称ンス許容差 Products meet EU-RoHS requirements. Product Features RoHSSuitable Style for Termination reflow soldering. Taping Nominal Tolerance 1 Suitable for reflow 8 Code soldering. タイヤ空気圧監視システム Products meets Surface Material Inductance スマートキーシステム EU-RoHS requirements. の構造 巻線技術により 低直流抵抗 高許容 Features 0402, 0603 Products meets EU-RoHS 0745 requirements. T:Sn TEG:Plastic 3 digits M:±20% 用途 Applications イモビライザーシステム Marking: 1045 embossed N:±30% の構造 巻線技術により 低直流抵抗 高許容 1 フェライトコア Ferite core 3 台座台座 Base を実現しました Base B 各種電子機器のDC-DCコンバータ 用途 1260Applications RF-ID BK:Bulk 12 フェライトコアマグネットワイヤ Ferite Magnet core wire 3 4 台座電極電極 Base Pin. 1 Side 品種形状端子表面材質二次加工 を実現しました DC-DC converter 0603for various 0604 electric 0805 equipments. 用途 1006 Applications 下記用途の受信用 Receiving LFアンテナコイル anttena coil 0906 for shown below. Product Style Terminal Taping 装タイプで 自動搭載に対応します 環境負荷物質含有についてEU-RoHS 以外の物質に対するご要求がある場合にはお問合せ下さい 2 マグネットワイヤ Magnet wire 4 電極 Code Surface Material 下記用途の受信用テーピングの詳細については巻末の LF 装タイプで 自動搭載に対応します だ付け性 耐環境性に優れています チョークコイル タイヤ空気圧監視システムアンテナコイル APPENDIX Tire CPressure を参照して下さい monitoring system 4 5 Resin Contact us when you have control request for environmental hazardous material other than the substance specified L W H (mm) T:Sn TEG:Plastic Smart key system 性 耐環境性に優れています だ付け性 耐環境性に優れています Power - SDR タイヤ空気圧監視システム by EU-RoHS. スマートキーシステム 11.8 3.6 3.0 embossed MARKING For further information on taping, please refer Immobilizer to APPENDIX system C on the back pages. BK:Bulk hoke ローはんだ付けに対応します Coils んだ付けに対応します 外形寸法外形寸法 Sizes 0603, Dimensions Dimensions スマートキーシステム イモビライザーシステム A ローはんだ付けに対応します RoHS 対応品です 外形寸法 定格 Dimensions Ratings RF-ID 0604, 0805, 1006, 0906 DOT Magnet wire 対応品です 形名外形寸法 Dimensions(mm) イモビライザーシステム RF-ID LKS0745 LKS1045Weight(g) 品種形状端子表面材質二次加工 RoHS DC resistance 対応品です and high allowable current 形名 DC Current Max.: 外形寸法 0.2A ~ 3A 形 Type 名 (1000pcs) Weight(g) L 外形寸法 W ンス H Max. 直流抵抗 RF-ID A Receiving B Weight(g) LF 許容直流電流 resistance and high allowable current Type (1000pcs) Inductance L Range: 1.5µH ~1200µH Max. A B realized DC resistance by the and original high allowable construction current 公称ンス SRF 定格 anttena 公称ンス Ratings coil for shown below. Product Style Terminal Taping ンス直流抵抗許容直流電流品種 SRF 形 Code 状端子表面材質 Surface 二次加工 Material 公称ンス値形名許容差 DC Allowable 形名許容差 DC Allowable and LPC4235 Type 4.5±0.2 L Nominal 4.2±0.2 W H 3.5 Max. Type Inductance Resistance Receiving 1±0.2 DC ACurrent LF (MHz) anttena 2±0.2 B coil Tire Type (1000pcs) for Pressure 165 shown Nominal monitoring below. system Product (MHz) Style Terminal Taping Nominal NEW Custom Wirewound Coil LWA 使用温度範囲 Inductance Operating Resistance temperature DC Current range: 40 +125 Inductance (μh) Typ. by the original and LPC4235 3.5 1±0.2 Common 2±0.2 Mode Inductance 165- SLF (μh) Typ. Tolerance (Ω)Max. (A)Max. 1 Tolerance (Ω)Max. (A)Max. 1 ing realized technology. by the original construction and LPC4235 LPC4545 Tolerance: 4.5±0.2 4.1±0.3±10% 4.2±0.2 4.6±0.4 ~ ±20% 3.5 4.6 3.2±0.3 1±0.2 2±0.2 165 C Code L W H Surface Material (mm) T:Sn TEG:Plastic Tire Pressure monitoring Smart key Inductance 0603 0604 0805 1006 230 包装数 system system / リール LKS0745 TTEG 3R3N 3.3 0.022 4.5 41 LKS1045 TTEG hnology. Size available: 0906 3R3N 3.3 1 Q ty/reel:2,500pcs 0.017 5.8 37 4 11.8 3.6 3.0 embossed Custom product which keeps its shape Immobilizer system 230 0905 L W H (mm) T:Sn TEG:Plastic BK:Bulk C3 digits omatic ng technology. surface mounting is applicable. LPC4545 LKS0745 4.1±0.3 TTEG 4R7N 4.6±0.4 4.7 4.6 0.031 3.2±0.3 Smart 3.8 key 34 system LKS1045 TTEG 4R7N 230 4.7 公称ンス 0.022 ンス 5.1 31 1 4 11.8 3.6 3.0 無負荷 Q L, Q 測定周波数自己共振周波数 embossed 直流抵抗 DC Current Max.: 600mA ~ 1600mA Thin omatic ellent surface even solderability surface mounting if no N:±30% mounting core and is nor endurance is applicable. bobbin RF-ID LKS0745 TTEG 5R6N 5.6 0.035 3.6 31 LKS1045 TTEG 5R6ND 5.6 N:±30% environment. 品名構成 Type Designation MARKING F D 0.024 4.9 EU are used 28 Immobilizer system BK:Bulk LKS0745 TTEG 6R8N 6.8 0.038 3.4 28 table ellent solderability OIL 形名 Nominal 許容差 Unload Quality L, Q Measuring Self Resonant DC LKS1045 TTEG 6R8N Type 6.8 Inductance 0.027 Inductance 4.6 25 Factor Frequency Frequency Resistance for solderability Different reflow and soldering. shapes, NEW and endurance dimensions, RoHS environment. RF-ID (mh) Tolerance LKS0745 TTEG 8R2N 8.2 0.050 2.8 25 品名構成例 Examples Type Designation DOT Inductance LKS1045 TTEG 8R2N Range: 8.2 10µH ~ 2000µH 0.032 4.0 Min. (khz) (khz)min. F (Ω)Max. 23 定格 Ratings 2 3 Thin - KL73 LKS0745 TTEG 100M 10 0.057 2.6 24 LKS1045 TTEG 100M KT11835TTEG722 10 7.20.042 G:±2% 3.6 21 40 table ducts or reflow for meet inductances reflow soldering. EU-RoHS soldering. on requirements. request 例例 LPC4235 Examples 2 3 H:±3% LKS0745 TTEG 120M 12 0.067 2.4 T TM 221 Tolerance: LKS1045 TTEG 120M K ±50% 12 or ±30% 0.043 3.4 125 使用温度範囲 Operating temperature range: 40 19 +125 ducts High self resonant F' J :±5% frequency meet meet EU-RoHS EU-RoHS requirements. requirements. LKS0745 TTEG 150M 15 0.100 2.1 19 LKS1045 TTEG 150M 15 0.065 3.0 Coils for wire-less power supply, 定格 Ratings 17 LPC4235 LPC4235 T TM TM 221 221 包装数 / リール K LKS0745 TTEG K Q ty/reel:2,500pcs Applications 品種端子表面材質 180M 18 0.113 2.0 二次加工公称ンス 17 LKS1045 TTEG 180M 18 0.066 2.9 15 許容差形名中 にはンス値の許容差記号 (G H J ) が入ります The code DC for inductance Resistance tolerance Max: (G, H, J) 0.10Ω enters. ~ 5.00Ω ype actuator, Product Termination Taping Nominal Tolerance pplications Applications Designation etc. 使用温度範囲 Operating temperature range: 40 +125 LKS0745 TTEG 220M 22 0.127 1.9 16 LKS1045 TTEG 12mH 220M 以下のンス値に対応します 22 品種端子表面材質二次加工公称ンス許容差 0.089 2.5 14 公称ンスンス品種端子表面材質二次加工公称ンス EAny other LKS0745 TTEG 許容差 Inductance Range: 0.56nH ~ 100nH DC-DCコンバータ用に好適 Product Code Surface 330M Termination Material 33 0.199 Polarity 1 無負荷 inductance Q under 4 L, 12mH Q 測定周波数 is available. 自己共振周波数直流抵抗包装数 / リール 1.5 Taping Inductance 13 Q ty/reel:2,500pcs LKS1045 TTEG 330M 33 0.159 1.9 11 Inductance range: approx. 10µH ~ 1mH Nominal 形 Tolerance 名 E ProductLKS0745 TTEG Termination 470M 47 Taping 0.253 1.3 Nominal 11 1 LKS1045 TTEG Tolerance 470M 47 4 Nominal 許容差 Unload Quality L, Q Measuring Self Resonant DC 0.196 1.7 9 l DC-DC Construction Tolerance: ±0.1nH ~ ± 5% Cfor コンバータ用に好適 a variety コンバータ用に好適 of DC-DC converter inductor LPC4235 Code Surface T:Sn(4235) Material 3 digits Code Surface Material TM:Plastic embossed Inductance Type Inductance K:±10% 本カタログに掲載の仕様は予告なく変更する場合があります ご注文およびご使用前に納入仕様書で内容をご確認下さい Inductance Inductance Factor WFrequency Frequency Resistance LKS0745 TTEG 560M 56 0.288 1.3 10 公称ンス LKS1045 TTEG 車載機器 医療機器 航空機器など人命に関わったり あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には 必ず事前にご相談下さい 560M ンス 56 0.215 無負荷 Q 1.5 L, Q 8測定周波数自己共振周波数直流抵抗許容直流電流 LPC4545 C:Sn/Cu (4235) M:±20% lications. l for a Tolerance: variety of approx. DC-DC +-5% converter inductor LPC4235 T:Sn(4235) TM:Plastic embossed 3 digits Specifications given (mh) herein may be changed Tolerance at K:±10% 0402 ~ 1206E LKS0745 TTEG 680M 68 M:±20% 0.437 1.0 9 LKS1045 TTEG 680M 68 M:±20% 0.2422 any time without prior notice. Min. Please confirm technical (khz) specifications before (khz)min. you order and/or use. (Ω)Max. 形名 1.4 8 3 a variety T of DC-DC TEB converter inductor 1R5 LPC4235 M NominalContact our sales 許容差 representatives before Unload you use our Quality products for applications L, Q Measuring including automotives, Self medical Resonant equipment and aerospace DCequipment. Allowable LPC4545 T:Sn(4235) C:Sn/Cu (4545) TM:Plastic TE:Plastic (4235) embossed 3 digits M:±20% K:±10% LKS0745 TTEG 820M 82 0.483 1.0 8 2 LKS1045 TTEG 820M 82 3 0.265 1.3 7 lications. Type KT11835TTEG722 Inductance Malfunction or Inductance failure 7.2 of the products in such G:±2% Factor applications may cause loss Frequency 40 of human life or serious damage. Frequency Resistance DC LPC4545 C:Sn/Cu (4545) TE:Plastic (4545) (4235) embossed M:±20% ECurrent H:±3% LKS0745 TTEG 101M 100 0.598 0.9 7 LKS1045 TTEG 101M 100 0.414 1.2 125 6 ns. Magnetic Wire (mh) Tolerance Min. (khz) (khz)min. (Ω)Max. (ma)max. LKS0745 TTEG 121M (4545) 120 TE:Plastic BK:Bulk 端子表面材質二次加工公称ンス許容差 (4545) embossed J :±5% 0.644 0.8 6 LKS1045 TTEG 121M 120 0.472 1.0 6 A C F(Typ.) Weight(g/1,000pcs) Marking LKS0745 TTEG 151M 150 BK:Bulk (4545) KT11835TTEG722 0.817 0.7 6 LKS1045 7.2 G:±2% TTEG 151M 150 0.575 0.9 5 Terminal Performance Taping Nominal Tolerance Polarity 40 形名中 にはンス値の許容差記号 LKS0745 TTEG 181M 180 BK:Bulk 0.897 0.7 5 LKS1045 TTEG 181M 180H:±3% (G H J ) が入ります 0.633 0.8 4 125 The code for inductance tolerance (G, H, J) enters. ation Surface Performance Material SDR0603 5.6±0.2 3.7±0.3 1.8 420 規格値 Inductance 3.0 12mH 以下のンス値に対応します Performance Requiremaents LKS0745 TTEG 221M 220 1.104 0.6 5 LKS1045 TTEG 221M 220 J :±5% Any other inductance under 12mH is available. 0.874 0.7 4 erformance 目 LKS0745 TTEG 331M 330 規格値 L/L Performance Requiremaents 試験方法 SDR0604 2.093 0.5.6±0.2 4 LKS1045 4.5±0.3 TTEG 331M 330 1.8 1.300 0.6 5253 Items 目 T:Sn TEB:Tape embossed 13 3 digits K:±10% LKS0745 TTEG 471M 470 Test Methods 規格値 L/L 試験方法形名中 2.576 にはンス値の許容差記号 0.4 3 LKS1045 TTEG 471M (G 470 H J ) が入ります 1.716 The code 0.5 for inductance 3 tolerance (G, H, J) enters. 本カタログに掲載の仕様は予告なく変更する場合があります ご注文およびご使用前に納入仕様書で内容をご確認下さい 保証値 Performance Limit Requiremaents Items BK:Bulk Y:±15% 代表値 Typical Test SDR0805 L/L 試験方法 Methods 12mH 以下のンス値に対応します 7.5±0.3 5.0±0.3 Any 車載機器 医療機器 航空機器など人命に関わったり あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には 必ず事前にご相談下さい other 2.6 inductance under 12mH 1155 is available. TEB 保証値 Limit 代表値 Typical Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 変 Rapid change of 1R5 temperature ±5% M M:±20% ±1.3% Test 40 (30min)/+125 (30min), SDR1006 Methods 9.5±0.3 Contact our 100cycles sales 本カタログに掲載の仕様は予告なく変更する場合があります ご注文およびご使用前に納入仕様書で内容をご確認下さい 5.5±0.3 representatives before you 2.9 use our products for applications 1837 including automotives, medical Coil equipment and aerospace equipment. 変 Rapid change of temperature 保証値 ±5% Limit 代表値 ±1.3% 車載機器 医療機器 航空機器など人命に関わったり あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には 必ず事前にご相談下さい Typical Malfunction or failure of the products in such applications may cause loss of human life or serious damage. Pattern 40 (30min)/+125 (30min), 100cycles Specifications given herein may be changed at any time without 本カタログに掲載の仕様は予告なく変更する場合があります ご注文およびご使用前に納入仕様書で内容をご確認下さい prior notice. Please 端子表面材質は鉛フリーめっき品が標準となります 置 Low temperture exposure ±5% ±1.3% 40, SDR0906 1000h 上図を参照してください confirm technical specifications Please before you refer order and/or to the use. above figure 1750 Contact our sales representatives before you use our products 車載機器 医療機器 航空機器など人命に関わったり あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には 必ず事前にご相談下さい for applications including automotives, medical equipment and aerospace equipment. Insulation Direction Rapid 次加工環境負荷物質含有について置 Low change 公称ンス temperture of temperature exposure EU-RoHS ±5% 許容差以外の物質に対するご要求がある場合には ±5% ±1.3% Malfunction or failure of the products in such ±1.3% 40, 40 (30min)/+125 (30min), applications A Specifications may cause loss of 1000h Cgiven human life herein or serious may F(Typ.) damage. be changed 100cycles at any Weight(g/1,000pcs) time without prior notice. Please confirm www.koanet.co.jp technical specifications before you order Mark and/or use. お問合せ下さい aping 置 High temperture Nominal exposure Tolerance ±5% ±1.3% 125, Contact 1000h our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. Low The 置 temperture terminal High temperture surface exposure Inductance material exposure lead ±5% free ±5% is standard. SDR0603 5.6±0.2Malfunction ±1.3% 125, 40, 1000h 1000h 3.7±0.3 or failure of the products 1.8 in such applications may cause 420loss of human life or serious damage. 1 4 Contact Moisture us when endurance you have control request ±5% for environmental hazardous ±1.6% SDR0604 material 5.6±0.2 40 ±2, 90%~95%RH, 4.5±0.3 1000h 1.8 525 High pe embossed other temperture Moisture 13 than the endurance substance exposure 3 digits specified ±5% K:±10% by EU-RoHS. ±5% ±1.3% ±1.6% 40 ±2, 125, 1000h 90%~95%RH, 1000h ulk Y:±15% SDR0805 7.5±0.3 5.0±0.3 2.6 1155 Moisture 端子鉛フリー品は 欧州 endurance RoHS 対応品です Dimensions M:±20% ±5% ±1.6% 40 ±2, 90%~95%RH, 1000h ランド寸法 Products with lead Recommended free termination Pad meet Dimensions EU-RoHS requirements. SDR1006 9.5±0.3 5.5±0.3 2.9 1837 L1 L2 L1 L2 P P A EU RoHS 電極を製品長辺へ配置した樹脂モールド外装のト電極を製品長辺へ配置した樹脂モールド外装のト 電極やランドパターンがコイル磁束を妨げないた A W B W Resin B magnetic flux of KT 101 Inductance 3 digits G: H: J: KT 11835 T TEG 722 KT 11835 T TEG 722 J 公称ンス値 Nominal Inductance 許容差 Toleran 3 digits G:±2 許容直流電流 H:±3 Allowable J:±5 感 Sens DC Current (mv (ma)max. 750 92 15 5 Land pattern Circuit Construction KT 11835 T TEG 722 公称ンス値 Nominal KT11835TTEG123 12 45 500 119 12 7 許容直流電流 Allowable DC Current 750 92 (ma)max. 感度 www.koane 15 Sensitivit (mv/ut KT11835TTEG123 12 45 500 119 12 750 92 15 55 KT11835TTEG123 12 45 500 119 12 75 許 To www.k www.koanet.co

LTCC s Integrated Components Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Low Temperature Co-Fired LTCC-KLC Technology Low Temperature Co-fired is a multilayer ceramic technology that allows for moderate firing temperatures. The LTCC process is similar to the thick film hybrid process employed for multilayer ceramic capacitor and chip inductors. The moderate firing temperature level below 900 C is achieved by mixing alumina and glass as main ingredients of the ceramic tape, the so-called green sheets. This permits the co-firing with highly conductive material (silver) for the electrodes. LTCC also support the creation of buried components and thus contribute to miniaturization. Shrinkage Control The LTCCs are fired under free shrinkage conditions: The material is allowed to shrink in all three dimensions. The highly homogeneous structure of the green sheets and precise process control ensures high reproducibility of the dimensional accuracy. Relative accuracies of 0.05 % can be achieved. This high accuracy allows for the realization of dimensionally accurate cavities for the mounting of bare die semiconductor chips. Features Excellent dimensional accuracy by KOA s original shrinkage control technology Multi layer technology up to 20 layers (more than 20 layers available on request) Surface Flatness down to ±5 µm on request High-density wiring by fine line patterning Miniaturization by buried R, L, C and strip-lines Back volumes and channels Excellent high frequency performance up to 60 GHz by the use of low loss ceramics and conductors Thermal expansion coefficient similar to Si and GaAs Precision cavities enable bare chip mounting with short bond wires Thermal vias under bare chips enhance heat transport Superior heat and humidity resistance Stack accuracy: 20µm max. Line width as low as 60µm Line-to-line spacing as low as 60µm flatness: 30 µm max. Via diameter: 100µm, 150µm, 200µm Through-via pad diameter: Via diameter +50µm min. Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min Flexural/bending strength: 250MPa Coefficient of Thermal Expansion: 5.5ppm/K Thermal conductivity: 3W/m K Minimum insulation resistance: 1x10 13 Ω cm Dielectric constant at 1MHz: 7 Dielectric loss at 1MHz: <0.003 Density: 2.8g/cm 3 Max. surface roughness (Ra): 0.4µm Min. withstanding voltage: 15kV/mm Fired layer thickness: 40µm ~ 125µm Cross-sectional structure Buried resistor Low Temperature Co-Fired LTCC-KLC Transmission line Surface resistor layer Cavity Cavity IC-chip Thermal via Capacitor Applications: High density sensor interconnect MEMS Packages High frequency: Microwave, Milliwave Harsh environment: High Temperature, High humidity Mobile Communications Multi Chip Modules Interposer substrates Conductor pattern Via Resistor Networks KOA s Integrated Passive Components - KPC Thin film (metal film) resistor array on Silicon wafer Excellent resistance matching, TCR tracking and stability Custom circuits are available with flexible layout (Different resistance combinations possible) Higher Integration saves board space and overall assembly costs Excellent reliability with standard molded IC package Suitable for reflow soldering Standard packagings: SOT-23 QSOP 16, QSOP 20, QSOP 24 SOIC-N08, SOIC-N14, SOIC-N16 Typical applications - Highly accurate peripheral resistors for analog operational amplifiers - Automotives, Analog instrumentations, IC-testers - Computers, Data communications, Network systems - Operational amplifiers, Terminations, Pull-up/Pull-down - Meets or exceeds IEC 60115-1, JIS C 5201-1, JIS C 5101-1 Isolated Resistors RIA Precision value matching Relative resistance tolerances: 0.05% ~ 2% T.C.R. tracking: 5ppm/K ~ 50 ppm/k Resistor Networks Bussed Resistors Standard Combinations Bussed RBA High speed bussed RBB Dual terminator RDA Differential terminator RDB R2R network RLA SOT-23 network RTX, RTY Custom RNX T.C.R.: ±10ppm/K ~ ±100ppm/K Resistance range: 10Ω ~ 510Ω Custom Resistor Networks Precision Pair Resistors CNN Thin on ceramic Ratio matching Ratio Tolerance: ±0.05% & ±0.1% T.C.R. absolute: ±25ppm/K T.C.R. relative: 5ppm/K

Leaded Resistors The industry s broadest line of leaded resistors and networks include designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance, PTC and fusing applications. Carbon General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series Power Rating: 0.25W ~ 0.5W Resistance Range: 2.2Ω ~ 5.1MΩ Tolerance: ±2% or ±5% High Power Resistor - SPR and SPRX Power Rating: 0.25W ~ 5W Resistance Range: 0.1Ω ~ 110kΩ Tolerance: ±1%, ±2% or ±5% Metal General Purpose - Reduced size MF/MFP/MFS/SN Series Power Rating: 0.25W ~ 2W Resistance Range: 1Ω ~ 5.11MΩ Tolerance: ±0.1% ~ ±5% T.C.R.: ±25 ~ ±200 ppm/k Precision - RNS/SF Series Power Rating: 0.125W ~ 1W Resistance Range: 0.2Ω ~ 6MΩ Tolerance: ±0.01% ~ ±5% T.C.R.: 5 ~ 50 ppm/k Metal Oxide General purpose - MO/MOX Series Power Rating: 0.5W ~ 3W Resistance Range: 5.1Ω ~ 150KΩ Tolerance: ±2%, ±5% T.C.R.: ±200 ppm/k Reduced Size - MOS/MOSX Series Power Rating: 0.5W ~ 5W Resistance Range: 0.1Ω ~ 100KΩ Tolerance: ±1%, ±2% or ±5% T.C.R.: ±300 ppm/k Trimming Line Marking Insulation Core End Cap Power Type - BSR Series Rectangular Case Power Rating: 2W ~ 20W Resistance Range: 430Ω ~ 75KΩ T.C.R.: ±300 ppm/k Lead Wire Wirewound Miniature type - CW/CWP/CWH Series Power Rating: 0.25W ~ 3W Resistance Range: 0.1Ω ~ 3kΩ Tolerance: ±0.25% ~ ±10% Power - RW/RWH Series Power Rating: 0.5W ~14W Resistance Range: 0.1Ω ~ 62kΩ Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series Rectangular Case BGR with glass core BWR with ceramic core Power Rating: 1W ~ 40W Resistance Range: 0.1Ω ~ 390Ω Tolerance: ±1% ~ ±10% High Voltage/High Power - P Series Special shape parts Power rating: up to 250W Working Voltage: up to 300 kv Leaded SIP Networks Thick - RKC/RKH/RKL Series Number of Pins: 3 ~ 16 Resistance Range: 10Ω ~ 2.2MΩ Tolerance: ±1% ~ ±5% Custom circuits available Precision Metal - MRP Resistance Range: 50Ω ~100KΩ Tolerance: ±0.1% ~ ±1% Ratio Tolerance: 0.025% ~ 0.5% Zero Ohm/Jumper Conformal coated - Z Series Max. Amperage: 1.5A, 2.5A Resistance: less than 20mΩ - J Series Max. Amperage: 8A, 10A Resistance: 10mΩ max. Jumper Wire - JL Series Max. Current Rating: 8A, 10A Resistance: 20mΩ max. Wire diameter: 0.5 or 0.6mm Type J Glass Lead Frame Specialty Anti-Surge, Metal Glaze - RCR Series Max. Working Voltage: 500V ~ 5000V Power Rating: 0.25W ~ 3W Resistance Range: 3.3Ω ~ 100MΩ Tolerance: ±1% or ±5% High Voltage, Metal Glaze - GS Series Max. Working Voltage: 0.5kV ~ 40kV Power Rating: 0.25W ~ 12W Resistance Range: 0.5MΩ ~ 10GΩ Tolerance: ±0.5% ~ ±10% Composition - PCF/HPC Series KOA original ceramic resistor Excellent characteristic against high voltage surge current Power Rating: 0.5W ~ 5W Resistance Range: 3.3Ω ~ 390KΩ Tolerance: ±10% ~ ±20% Current Sensing Rectangular Type - BPR Series Power Rating: 2W ~ 14W Resistance Range: 0.01Ω ~ 1Ω or ±10% Twin Type with 3 leads available Case Cement Linear Thin PTC - LT/LP Series Resistance Range: 1Ω ~ 100kΩ Tolerance: ±1%, ±2%, ±5% T.C.R.: 150ppm/K ~ 5000ppm/K T.C.R.: Tolerance: ±50ppm/K, ±5% ~ ±10% Fusing Resistors - RF/BMF Series Power Rating: 0.17W ~ 5W Resistance Range: 0.1Ω ~ 15kΩ, ±10% RF25CC: Constant current fusing type RF26: Radial type BMF: Rectangular type WF: Thermal fuse built-in TPR1: Temperature protection resistor Resin Plated Copper Wire

For an Innovative Partnership KOA Europe In Dägeling, Product and Application Engineers, together with an experienced Sales Force and a dedicated Customer Service Team, share one focus: our mutual growth and success. Such aspirations necessitate all-round competence including continuous efforts in: A wide programme of passive components Product innovations Superior Customer Support Total Quality Management Custom-built logistic packages Competitive prices Logistics is the key to efficiency and worldwide success. KOA Europe runs a warehouse with approx. 2 billion pieces stock on hand to support customers within 24 hours with the most common parts. Our experts are pleased to share their experience with you: JIT shipments Customer specific labelling Full range of EDI possibilities Electronic incoming and dispatch control Consignment Stock Continuous improvement is a must for today s global business We achieved ISO 9001 certification the year following our foundation Moreover, KOA s production plants are ISO/TS 16949 and ISO 14001 approved Technical Support plays a critical role in helping customers to improve product quality. KOA s technical staff is highly trained in: Development of new products Design-In Application Engineering Product Performance Characteristics Even with all this expertise, a company can only be as good as its Customer Service Team. At KOA you will find: Competent and reliable partners for your enquiries A multi-lingual team Automated order and sample processing Prompt, efficient responses And yet continuous improvement is our goal. Constant staff training is one means by which we are aiming to achieve it, good communication with you is another. Let s work together for Your KOA Europe Team KOA Europe 11 / 2012 EUROPE GMBH Kaddenbusch 6 D-25578 Dägeling/Itzehoe Germany Phone : +49 (0)4821/8989-0 Fax : +49 (0)4821/898989 E-Mail : Koa-Europe@koaeurope.de Internet : http: //www.koaeurope.de